Why does Ice float on water?


A because ice has a lower density than water

B because of adhesion

C because of cohesion

D because ice has a higher density than water

To determine which solution component will have the lowest concentration at the end of the kinetic assay described in the passage, we need to consider the role of each component: Lactate, ADP, ATP, and NAD+.

The solution component with the lowest concentration at the end of the kinetic assay described in the passage is likely to be ADP. During the assay, ADP is converted to ATP, which causes a decrease in its concentration.

The other components, Lactate, ATP, and NAD+, are either being consumed or produced during the reaction, but ADP is being converted to ATP and is not regenerated, leading to its lower concentration at the end of the assay.

Fermentation is a metabolic process that consumes sugar in the absence of oxygen. It can also enhance the shelf life and health benefits of fermented foods because of its probiotic content. This process also maintained the ATP and NAD levels through regenerating more NAD+ and a small amount of ATP.

To know more about metabolic process :

https://brainly.com/question/19113839

#SPJ11

The density of the main band can change over 4 generations due to factors such as natural selection, genetic drift, gene flow and  mutation, which all contribute to the changing frequencies of traits within a population.

To explain why the density of the main band changed over 4 generations, we must first understand the terms "main band" and "density."

The "main band" refers to the predominant group or trait in a population, while "density" refers to the amount or concentration of that group or trait within the population.

Now, let's address why the density of the main band changed over 4 generations:

1. Natural selection: The environment may favor certain traits, leading to the survival and reproduction of individuals with those traits. Over generations, this can cause the density of the main band to change as the favored traits become more common.

2. Genetic drift: Random fluctuations in the frequency of traits within a population can cause the density of the main band to change over generations. This is especially common in small populations, where chance events can have a significant impact on the overall genetic makeup.

3. Gene flow: The movement of individuals and their genetic material between populations can introduce new traits or change the frequency of existing traits in the main band, causing its density to change over generations.

4. Mutation: New genetic variations can arise through mutations, which can cause the density of the main band to change if the new variation becomes more common over generations due to natural selection or genetic drift.

In conclusion, the density of the main band can change over 4 generations due to factors such as natural selection, genetic drift, gene flow, and mutation, which all contribute to the changing frequencies of traits within a population.

Learn more about natural selection, genetic drift, gene flow and mutation : https://brainly.com/question/15856790

#SPJ11

The maximum sulfide ion concentration that can be used to obtain optimum separation is 0.040 M. In order to separate the CO2 and Cu2 ions using precipitation of Cus, we need to determine the maximum sulfide ion concentration that can be used for optimum separation.

This can be achieved by considering the solubility product of Cus, which is given by Ksp = [Cu2+][S2-]. At equilibrium, the product of the concentrations of Cu2+ and S2- ions should be equal to Ksp to ensure complete precipitation of Cus.

Since the concentrations of Cu2+ and S2- ions are equal in the solution, we can substitute their value as 0.040 M in the Ksp expression to get Ksp = (0.040)^2. Rearranging the equation, we get [S2-] = Ksp/[Cu2+] = (0.040)^2/0.040 = 0.040 M.

Any concentration above this value would result in excess sulfide ions in the solution, which may lead to incomplete precipitation of Cus or the formation of other unwanted precipitates. It is important to note that the actual concentration of sulfide ions used should be slightly lower than the maximum value to avoid any experimental errors.

To know more about precipitation refer here:

https://brainly.com/question/14330965#

#SPJ11

Answer:

Ammonia (NH3), chlorine (Cl2), and nitrogen (N2) are not noble gases at STP. So the answer is? :)

NEONNNNNNN

The reported percent water in the hydrated salt will be reported too low if the hydrated salt is overheated and the anhydrous salt thermally decomposes, producing gas as one of the products.

1. When the hydrated salt is heated, the water molecules are removed, resulting in the formation of anhydrous salt.
2. If the anhydrous salt is overheated, it thermally decomposes, and gas is produced as one of the products.
3. This decomposition causes a reduction in the mass of the anhydrous salt, which is used to calculate the percent water in the hydrated salt.
4. Since the mass of the anhydrous salt is lower due to decomposition, the calculated percent water in the hydrated salt will also be reported as lower than the actual value.

Remember that the percent water is calculated using the mass difference between the hydrated and anhydrous salts. When the anhydrous salt decomposes, it affects this mass difference and therefore influences the reported percent water.

Learn more about hydrated salt at https://brainly.com/question/27298158

#SPJ11

The given statement ," one of the advantages of burning fossil fuels is that it produces O₂ for humans to breathe" is false.

Generally greenhouse gases act similarly as the glass in a greenhouse as they absorb the sun's heat that radiates from the Earth's surface, and these effect traps it in the atmosphere and prevent it from escaping into space. Basically, the greenhouse effect keeps the Earth's temperature warmer than it would otherwise be, supporting life on Earth.

Burning of fossil fuel creates climate change and releases pollutants that lead to early death, heart attacks, respiratory disorders, stroke, asthma, and absenteeism at school and work. Burning of fossil fuels has also been linked to autism spectrum disorder and Alzheimer's disease.

Hence, the given statement is false.

Learn more about greenhouse effect from the link given below.

https://brainly.com/question/13390232

#SPJ4

When using the sulfosalicylic acid test, false-positive protein results may occur in the presence of substances such as penicillin, cephalosporins, and tetracyclines, as well as high levels of uric acid and some detergents.

It is important to consider these potential interfering substances when interpreting the results of the sulfosalicylic acid test. False-positive protein results may occur in the presence of:

1. Radiographic contrast media
2. Highly pigmented urine
3. Medications such as penicillin or sulfonamides
4. High concentrations of uric acid

These substances can interfere with the sulfosalicylic acid test, leading to inaccurate protein measurements.

You can learn more about uric acid at: brainly.com/question/28583464

#SPJ11

So, at same temperature of 273 K, large amount of heat will be removed by ice from the surroundings than in case of water. Hence, ice at 273 K is more effective in cooling than water at the same temperature.

Boiling flasks are used for heating and boiling of liquids. The flasks are designed to have spherical our bodies with long, skinny necks to facilitate uniform warmness distribution and reduce evaporation. Boiling flasks are generally made from borosilicate glass, that is proof against thermal surprise and chemicals. The flask decreases the vapor stress of the liquid. When the vapor pressure decreases, the equilibrium among the liquid and the vapor shifts to the liquid.

To learn more about Vapor pressure check the link below-

https://brainly.com/question/2693029

#SPJ4

The torque applied to the oil plug is d. 0.84 Nm.

To calculate the torque applied to the oil plug, we need to multiply the force by the distance from the pivot point, which in this case is the oil plug. Torque is represented by the symbol τ (tau) and is measured in Newton meters (Nm).

First, we need to convert the distances given into meters them  by dividing by 100. So, the daughter's distance is 0.07m and the father's distance is 0.04m.

Next, we can calculate the torque applied by each person using the formula:

τ = force x distance

For the daughter: τ = 4.0N x 0.07m = 0.28 Nm
For the father: τ = 14N x 0.04m = 0.56 Nm

Finally, we can add the torques together to find the total torque applied to the oil plug:

Total torque = 0.28 Nm + 0.56 Nm = 0.84 Nm

Therefore, the answer is d. 0.84 Nm.

In summary, torque is the product of force and the perpendicular distance from the pivot point. When two or more forces are acting on an object, the total torque is the sum of the torques. In this case, the father and daughter were both applying a force in the counterclockwise direction to loosen the oil plug, and their individual torques were added together to find the total torque applied.

Know more about Newton meters  here:

https://brainly.com/question/30121704

#SPJ11

If the original volume is doubled at constant temperature, the pressure would reduce by half. Therefore, the correct option is option B.

The force delivered perpendicularly to an object's surface per unit area across how that force is dispersed is known as pressure. The pressure as compared to the surrounding air is known as gauge pressure (445). Pressure is expressed using a variety of units. Some of these are calculated by dividing a unit of force by a unit of area; for instance, the standard international unit of stress, the pascal (Pa), is equal to one newton every square metre (N/m2). If the original volume is doubled at constant temperature, the pressure would reduce by half.

Therefore, the correct option is option B.

To know more about pressure, here:

https://brainly.com/question/29341536

#SPJ4

Melting temperature (Tm) in terms of protein folding refers to the temperature at which a protein denatures or loses its folded, functional state due to the disruption of non-covalent interactions that stabilize its native structure.

The Tm is a critical parameter that reflects the stability of the protein and its ability to resist thermal denaturation. Typically, the Tm of a protein is defined as the temperature at which 50% of the protein molecules are unfolded or denatured.

Proteins are composed of long chains of amino acids that fold into a three-dimensional structure to carry out their biological function. The folding of proteins is driven by a balance of attractive and repulsive forces between the amino acid side chains and the surrounding solvent.

The stability of the folded protein is influenced by a range of factors, including the sequence of amino acids, the pH, the ionic strength of the solution, and the temperature.

As the temperature increases, the thermal energy of the system disrupts the non-covalent interactions that stabilize the folded state of the protein, causing the protein to become increasingly disordered and eventually denatured.

The melting temperature of a protein is determined by measuring changes in its physical properties, such as fluorescence, turbidity, or circular dichroism, as a function of temperature. By monitoring these changes, one can determine the temperature at which the protein begins to denature and calculate its Tm.

For more question on Melting temperature click on

https://brainly.com/question/25074953

#SPJ11

To determine the molecular formula of a compound given its molar mass and empirical formula, we need to compare the molar mass of the empirical formula with the given molar mass of the compound.

The correct option is:-D

- Carbon (C): 2 atoms x 12.01 g/mol = 24.02 g/mol
- Hydrogen (H): 5 atoms x 1.01 g/mol = 5.05 g/mol
- Oxygen (O): 2 atoms x 16.00 g/mol = 32.00 g/mol
- Empirical formula molar mass = 24.02 + 5.05 + 32.00 = 61.07 g/mol

Determine the ratio between the molecular formula molar mass and the empirical formula molar mass.
- Ratio = (Molecular formula molar mass) / (Empirical formula molar mass) = 183.2 g/mol / 61.07 g/mol = 2.99 ≈ 3

Multiply the empirical formula by the ratio to get the molecular formula.
- Molecular formula = 3(C2H5O2) = C6H15O6

Therefore, the molecular formula of the compound is C6H15O6.

To know more about Molar mass refer here:-

https://brainly.com/question/12127540#

#SPJ11

The order of decreasing activity for these metals is Cd > Sn > Ag.

To rank the following metals in order of decreasing activity based on the given information, we need to consider the standard reduction potentials (Eo) provided. The lower the Eo value, the more active the metal is. Here is the list with the most active metal at the top:

1. Cd (Cadmium): Cd²⁺ + 2e⁻ → Cd; Eo = -0.403 V
2. Sn (Tin): Sn²⁺ + 2e⁻ → Sn; Eo = -0.136 V
3. Ag (Silver): Ag⁺ + e⁻ → Ag; Eo = 0.799 V

In summary, the order of decreasing activity for these metals is Cd > Sn > Ag.

To learn more about activity series of metals visit: https://brainly.com/question/14129976

#SPJ11

The strength of a bond is determined by the interaction between the electrons in the atoms or molecules involved in the bond. There are four main types of bonds: ionic, covalent, metallic, and hydrogen.

In ionic bonds, the attraction between positively and negatively charged ions holds the atoms together. Covalent bonds occur when atoms share electrons to fill their outer shells, forming a molecule.

Metallic bonds result from the delocalized electrons moving freely throughout the metal lattice, creating a cohesive force.

Finally, hydrogen bonds arise from the attraction between a hydrogen atom in one molecule and an electronegative atom (e.g. nitrogen, oxygen, or fluorine) in another molecule.

The strength of a bond is related to the potential energy between the atoms or molecules involved. When the atoms or molecules are brought close together, their potential energy decreases.

This decrease in potential energy corresponds to a release of energy, which can be observed as a bond formation. As the distance between the atoms or molecules increases, the potential energy increases and the bond becomes weaker.

The relationship between potential energy and bond length is described by the potential energy curve. The potential energy curve shows the change in potential energy as a function of the distance between the atoms or molecules.

The curve has a minimum energy point the bond length, which corresponds to the most stable arrangement of the atoms or molecules. If the atoms or molecules are pulled apart beyond the bond length, the potential energy increases rapidly, indicating a weakening of the bond.

learn more about hydrogen here:

https://brainly.com/question/31018544?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

A non-reactive electrode is composed of a material that does not participate in the electrochemical reaction, but only serves as a conductor of electrons.

It is commonly made of materials such as platinum or carbon, which are excellent conductors of electricity. Non-reactive electrodes are commonly used in electrochemical cells to provide a pathway for the electrons to flow between the anode and the cathode.

On the other hand, a reactive electrode participates in the electrochemical reaction by undergoing a half-reaction. This type of electrode can either be the anode or cathode in the electrochemical cell, depending on whether it is gaining or losing electrons. Reactive electrodes are commonly made of metals or metal alloys that are easily oxidized or reduced.

Overall, the difference between non-reactive and reactive electrodes lies in their participation in the electrochemical reaction. Non-reactive electrodes simply serve as conductors, while reactive electrodes undergo a chemical transformation during the reaction.

To know more about electrode, refer here:

https://brainly.com/question/17060277#

#SPJ11

The equivalence point of a weak acid titration is identified by a dramatic increase in pH, resulting in a sharp vertical increase in the titration curve.

This is because at the equivalence point, all of the weak acid has been neutralized by the strong base, resulting in the formation of a salt and water.

The pH of the solution increases rapidly because the salt formed is usually neutral, and the concentration of H+ ions decreases.

Before the equivalence point, the titration curve shows a gradual horizontal increase in pH as the strong base is added to the weak acid. After the equivalence point, the titration curve shows a gradual horizontal decrease in pH as the excess strong base is added.

To know more about acid titration, refer here:

https://brainly.com/question/2728613#

#SPJ11

Ambulatory or mobility devices are required to reduce weight-bearing, provide wider base of support, support unstable joints, assist with balance and coordination, improve mobility and independence, provide relief from pain, compensate for weakness, and provide means of exercise/therapy.

Reduce weight-bearing on lower limbs - either on a temporoary or permanent basis. To provide a wider base of support eg the use of a quad walker or a zimmer frame can achieve this. To provide a means of exercise or physical therapy for individuals with mobility impairments.

Assist with balance and coordination for individuals with conditions such as Parkinson's disease or ataxia. To improve mobility and independence for individuals with conditions that affect their ability to walk, such as spinal cord injuries, muscular dystrophy, or stroke.

Support of unstable joints eg leg braces or ankle-foot orthoses can provide additional stability and reduce the risk of falls for individuals with conditions such as cerebral palsy or multiple sclerosis.

To provide relief from pain or discomfort associated with standing or walking for extended periods of time, such as in the case of osteoarthritis or plantar fasciitis. To compensate for weakness or paralysis in the lower limbs, such as with the use of braces or exoskeletons for individuals with spinal cord injuries or stroke.

To know more about Ambulatory devices:

https://brainly.com/question/31587778

#SPJ1

--The given question is incomplete, the complete question is given

" Wheelchair prescription and modifications involves five main rationales, according to Dutton, 1995:

Facilitate transfers

Facilitate proper positioning

Overcome architectural barriers

Permit self-propulsion

Permit transportation of objects

Other than substitution for a lost limb, and facilitating the ability to transport needed objects, why else do you think ambulatory or mobility devices are required for some individuals? "--

The rate law for the given reaction, X + 2Y → XY₂, based on the proposed mechanism is rate = k[X][Y], where the slow step is X + Y → XY.

To determine the rate law for the given reaction, we need to identify the slow step in the proposed mechanism. In this case, Step 1 is the slow step.

The slow step is the rate-determining step, meaning the rate of the reaction is determined by the rate of this step. The other steps, which are fast steps, will have reached equilibrium by the time the slow step is completed.

The slow step involves X and Y forming XY, so the rate law for this step will involve [X] and [Y]. Looking at the stoichiometry of the overall reaction, we see that the formation of XY₂ involves one XY and one Y. Thus, the rate law for the overall reaction will involve [XY] and [Y].

Using the rate-determining step, the rate law can be written as:

Rate = k [X][Y]

Therefore, by observing we can say that the rate is K[X][Y].

To know more about the  rate law refer here :

https://brainly.com/question/4222261#

#SPJ11

The statement "Reduction of Benzil and whether the melting point obtained for the product can indicate if it's benzoin or hydrobenzoin" is correct. The melting point of a compound is a characteristic property that can be used to help identify the substance.

When reducing benzil, the product formed can be either benzoin or hydrobenzoin, depending on the reaction conditions.

Benzoin has a melting point of 137-139°C, while hydrobenzoin has a melting point of 161-163°C. If the melting point of your product is within the range of one of these compounds, it can provide some evidence that your sample is either benzoin or hydrobenzoin. However, relying solely on the melting point might not be enough to confirm the identity of the product.

Additional evidence can be gathered by performing other characterization techniques such as infrared (IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, or mass spectrometry (MS).

These techniques can provide information on the functional groups and structure of the compound, further supporting the identification of your product as benzoin or hydrobenzoin.

By comparing the obtained data with the known data of benzoin and hydrobenzoin, We can be more confident in determining the identity of your product.

For More Such Questions on Benzil

https://brainly.com/question/9415260

#SPJ11

The empirical formula of a compound is the  C₃H₆O₂. The correct option is E.

The mass of the carbon = 48.6 g

The mas of the hydrogen = 8.2 g

The mass of the oxygen = 43.2 g

The number of moles of carbon = mass / molar mass

The number of moles of carbon = 48.6 / 12

The number of moles of carbon = 4

The number of moles of hydrogen = 8.2 / 1

The number of moles of hydrogen = 8.2

The number of moles of oxygen = 43.2 / 16

The number of moles of oxygen =2.7

Dividing by the smallest one , we get :

Moles of C = 1.48  × 2 = 3

Moles of H = 3 × 2 = 6

Moles of O = 1 × 2 = 2

The empirical formula is C₃H₆O₂. The option E is correct.

To learn more about empirical formula here

https://brainly.com/question/28036843

#SPJ4

The pKb for the conjugate base of an acid with Ka1 = 10^-2 is 12.

The pKb for the conjugate base of an acid can be calculated using the following equation: pKb = 14 - pKa

where pKa is the negative logarithm of the acid dissociation constant (Ka) of the acid. This equation relates the strength of the acid to the strength of its conjugate base.

To find the pKb for the conjugate base of an acid with Ka1 = 10^-2, we first need to determine the pKa and then use the relationship between pKa and pKb.

Step 1: Determine the pKa
pKa = -log(Ka1) = -log(10^-2) = 2

Step 2: Use the relationship between pKa and pKb
pKa + pKb = 14 (This relationship is derived from the ion product of water: Kw = Ka * Kb, where Kw = 10^-14 at 25°C)

Step 3: Solve for pKb
pKb = 14 - pKa = 14 - 2 = 12

To know more about pKb:

https://brainly.com/question/30079699

#SPJ11

The correct formula for strontium nitrite is B) Sr(NO₃)₂.

A polyatomic ion with a charge of 1, strontium is an alkaline earth metal with a 2+ charge. Two nitrite ions are required for every strontium ion in order to create an electrically neutral molecule. One nitrogen atom and three oxygen atoms make up the nitrite ion, which has the formula NO₃-.

The charges of strontium and nitrite are then balanced to provide the formula for strontium nitrite. Strontium can react with two nitrite ions that each have a 1-charge since it has a 2+ charge. So, Sr(NO₃)₂ is the strontium nitrite chemical formula. This means that one strontium ion (Sr2+) and two nitrite ions (NO₃-) are present in one formula unit of strontium nitrite.

A white crystalline substance called strontium nitrite is only weakly soluble in water. It serves as a colorant in pyrotechnics and is used to make specific kinds of glass and ceramics.

To know more about the strontium nitrite refer here :

https://brainly.com/question/13064568#

#SPJ11

The type of structure :

Snakes have remnants of back legs = Vestigial Structure.

Bats have the same arm bone structure as cats = homologous structure.

Frogs, humans, and whales have a backbone = homologous structure.

Bats and moths both have wings, but not a common ancestor = analogous structure.

The Vestigial Structure is the Genetically found structures and the  attributes which have the lost most and the all of their function in the given species. The Homologous structures are those structures from the organisms that will share the common ancestor.

The Analogous structures are the features for the different species which are same in the function and not in the structure.

To learn more about structure here

https://brainly.com/question/30045110

#SPJ4

Answer:

C, A, A, B

Proof:

In electrophilic aromatic substitution reactions, a -CO2H substituent on the aromatic ring is: a deactivating group.

This means that it decreases the electron density of the ring and makes it less reactive towards electrophiles. The -CO2H group is an electron-withdrawing group due to the presence of the carbonyl group, which is a strong electron-withdrawing group.

The -CO2H group also has a resonance effect that further reduces the electron density on the ring. As a result, the reaction rate is slower and requires more vigorous conditions for the substitution reaction to take place. Additionally, the position of the substituent on the ring also affects the reactivity.

If the -CO2H group is located at the ortho or para positions, it can hinder the incoming electrophile and direct the substitution to the meta position. In summary, the -CO2H substituent on the aromatic ring is a deactivating group that reduces the electron density and makes the ring less reactive towards electrophiles.

For more such questions on aromatic ring, click on:

https://brainly.com/question/22640125

#SPJ11

Alpha and Beta-D-glucopyranose are Anomers of each other.

The relationship between alpha and beta-D-glucopyranose is that they are anomers of each other. Both alpha and beta-D-glucopyranose are cyclic forms of D-glucose, and they differ in the configuration of the hydroxyl group (OH) at the anomeric carbon (C1). In alpha-D-glucopyranose, the hydroxyl group is positioned below the plane of the ring, while in beta-D-glucopyranose, the hydroxyl group is positioned above the plane of the ring. The two forms can interconvert through a process called mutarotation.

To know more about Anomers:

https://brainly.com/question/31609773

#SPJ11

The set of elements in which all members would be expected to have very similar chemical properties is (d) Na, Mg, K.

The elements in group 1 and group 2 of the periodic table have similar electronic configurations and are often referred to as the alkali metals and alkaline earth metals, respectively.

In group 1, sodium (Na) and potassium (K) have similar electronic configurations, with one valence electron in their outermost shell. Similarly, in group 2, magnesium (Mg) has two valence electrons in its outermost shell, just like calcium (Ca) and strontium (Sr).

Elements with similar electronic configurations tend to have similar chemical properties because they tend to react in similar ways. Sodium, magnesium, and potassium are all metals that readily form positive ions (Na⁺, Mg²⁺, and K⁺) when they react, and they tend to form compounds with similar structures and properties.

For example, sodium chloride (NaCl), magnesium chloride (MgCl₂), and potassium chloride (KCl) all have similar crystal structures and are all soluble in water.

Therefore, Na, Mg, and K are expected to have very similar chemical properties due to their similar electronic configurations.

To know more about set of elements, refer here:
https://brainly.com/question/11635220#
#SPJ11

The reaction you are referring to is the bromination of a terminal alkene using N-bromosuccinimide (NBS) and carbon tetrachloride (CCl4) as solvents in the presence of heat. This reaction is known as the "Hell-Volhard-Zelinsky" (HVZ) bromination.

The mechanism of the HVZ bromination involves the formation of a free radical intermediate, which is generated by the reaction between NBS and a small amount of hydrogen bromide (HBr) that is formed by the reaction between the terminal alkene and NBS.

This free radical intermediate then reacts with the terminal alkene, leading to the formation of a bromoalkene. The reaction proceeds via an anti-Markovnikov addition of bromine to the terminal carbon of the alkene.

The role of CCl4 in this reaction is to act as a solvent and to facilitate the formation of the free radical intermediate. The reaction is typically carried out at elevated temperatures, which helps to generate the free radical intermediate and to promote the overall reaction.

Overall, the reaction can be represented by the following equation:

Terminal alkene + NBS + CCl4 + heat → Bromoalkene

learn more about hydrogen here:

https://brainly.com/question/31018544?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

The mass of the octane will be burned in order to release the 5340kJ of energy and the  ΔH value is -5471kJ/mol is 110.83 g.

The heat energy = 5340kJ

The ΔH value = -5471kJ/mol

The moles of the octane = 5340 / 5471

The moles of the octane = 0.97 moles of the octane

The number of the moles =  mass / Molar mass

The Mass of the octane =  Moles × M.mass

The Mass of the octane =  0.970 mol × 114.23 g/mol

The Mass of the octane =  110.83 g of Octane

Thus, the mass of the octane is 110.83 g and release the 5340kJ of energy with the ΔH value is -5471kJ/mol.

To learn more about energy here

https://brainly.com/question/9015967

#SPJ4

The boiling point of a solution is related to the molality of the solution (the number of moles of solute per kilogram of solvent) by the equation: The Correct option is [tex]Na_{3} PO_{4}[/tex]

ΔTb = Kb x molality

where ΔTb is the change in boiling point, Kb is the boiling point elevation constant, and molality is the molality of the solution.

We can calculate the molality of compound X using the given information:

ΔTb = Tb - Tb°

where Tb is the boiling point of the solution and Tb° is the boiling point of the pure solvent, which is 100°C for water at standard pressure.

ΔTb = 101.4°C - 100°C = 1.4°C

molality = ΔTb / Kb

For water, Kb = 0.52°C/m, so:

molality = 1.4°C / 0.52°C/m = 2.7 m

Now we need to identify which of the given compounds could form a 1.35 m solution with water, resulting in a boiling point elevation of 1.4°C.

ΔTb = Kb x molality = 0.52°C/m x 2.7 m = 1.4°C

Therefore, the compound that could be X is [tex]Na_{3} PO_{4}[/tex].

Learn more about molality

https://brainly.com/question/26921570

#SPJ4

Answer:

C. Hydrogen

Explanation:

Both Helium and Hydrogen are present in the sun but its mostly made up of more Hydrogen.