which type of cloud deployment model uses both public and private clouds, allowing you to run workloads on either cloud deployment models, and having them work seamlessly together?Select an answer:publicprivateremotehybrid

The answer is option d) make an all-call announcement throughout entire building or selective floors via public address speakers.

The fire command station has the capability to make an all-call announcement throughout the entire building or selective floors via public address speakers. In this option (d), the fire command station utilizes a public address system to communicate important information and instructions during emergency situations. This allows for efficient communication to occupants, ensuring their safety and proper evacuation if necessary. The other options (a, b, and c) do not accurately describe the primary function of a fire command station. The main purpose is to provide a centralized location for emergency communication and management within the building, focusing on announcements through public address speakers.

Learn more about fire station: https://brainly.com/question/30608269

#SPJ11

If the duct-mounted electric heater is too lengthy to fit within the duct, the technician can increase the length of the duct with a transition piece or a rectangular duct section.

The transition component would fit between the heater and the duct, adding the extra length needed to install the heater properly. The rectangular duct portion might potentially be utilized in a similar manner to expand the duct's length.

The technician should take care to ensure that the additional component is correctly sealed and secured to the heater and duct to prevent air leaks, which might compromise the heating system's performance and safety.

Learn more about electric heater at:

https://brainly.com/question/15629252

#SPJ1

If the duct-mounted electric heater is too lengthy to fit within the duct, the technician can increase the length of the duct with a transition piece or a rectangular duct section.

How do we explain this?

The transition component would fit between the heater and the duct, adding the extra length needed to install the heater properly. The rectangular duct portion might potentially be utilized in a similar manner to expand the duct's length.

The technician should take care to ensure that the additional component is correctly sealed and secured to the heater and duct to prevent air leaks, which might compromise the heating system's performance and safety.

Learn more about electric heater at:

brainly.com/question/15629252

#SPJ11

The next section that should be added to the briefing paper for customers on the organizational consequences of data and privacy breaches, as per CompTIA Security+ objectives, is the legal and regulatory implications of such breaches. This section should outline the potential legal consequences of data breaches, including fines, penalties, and lawsuits, as well as the impact on the organization's reputation and customers' trust. It should also address how the organization will comply with data protection regulations and ensure the privacy of customers' personal information. By including this section, customers will have a comprehensive understanding of the potential consequences of data and privacy breaches and how they can protect themselves and their sensitive information.

To know more about organizational consequences

https://brainly.com/question/29352973?

#SPJ11

The depth of the water need to produce volumetric flow rate of 0.1 m3/s is about 63.88m

1. the first step to finding volumetric flow rate is to find velocity.

Volume flow = area x velocity  which is

0.1 m3/s = π(0.0075/2)2 x velocity

velocity = 2.83 m/s

2. We need to find RE;

RE = ρVD/μ

998 x 2.83 x 0.075  ÷ 1.002 x 10⁻³ pa.s = 2.11 x 10⁵

This helps us determine friction;

f = 0.079 ÷ (2.11 x 10⁵) [tex]^\frac{1}{4}[/tex]

= 0.00267

3. Head loss due to friction should be;
hl = (4 x 0.0195 x 150 ÷ 0.075)  x  (2.83²) ÷ (2 x 9.81)

= 63.68

4. head loss due to coefficient of 0.5;

hlc = 0.5 x (2.83²) ÷ 2 x 9.81 = 0.204

5. Total head loss is therefore;

63.68 + 0.204 = 63.884

Find more exercises on volumetric flow rate;

https://brainly.com/question/31426489

#SPJ1

True, MegaPress is designed and intended to be used with Schedule 5-40 pipe. MegaPress is a press fitting system specifically designed for use with carbon steel pipes, such as Schedule 5-40 pipe, to create secure and reliable connections.

A press tool is used to compress fittings onto the pipe in a press fitting system, such as MegaPress, to provide a secure and dependable connection without the use of welding, threading, or soldering.

MegaPress fittings are specifically made for use with carbon steel pipes, which are frequently used in industrial and commercial applications. MegaPress is designed to be used with Schedule 5-40 pipe. These pipes are available in several schedules, or wall thicknesses.

MegaPress is not advised for use with other types of pipe, including those made of copper or stainless steel, even if these materials may work with MegaPress. This is so that connections made using MegaPress fittings, which are made to compress onto carbon steel pipes, will be secure and dependable, as opposed to connections made using other materials.

Learn more about the MegaPress :

https://brainly.com/question/31597386

#SPJ11

There is no single factor that a floor warden should ignore when selecting an evacuation stair. However, if we have to choose an option that is least important to consider, it would be option C - stair leads to roof.

While a stairway leading to the roof may be useful for rescue operations, it is not a critical factor in the selection of an evacuation stair. The location of the fire, the presence of smoke in the stairway, and the direction from the Fire Command Station are all crucial factors that a floor warden should consider when selecting an evacuation stair. The location of the fire and the presence of smoke will affect the safety of the evacuation route, while the direction from the Fire Command Station will help ensure that the evacuation is coordinated and efficient.

Therefore, the correct answer is option C.

Learn more about evacuation, here:

https://brainly.com/question/31539560

#SPJ4

It is to be noted that the sealing element that is indicated by a yellow dot and yellow sticker is known as a PTFE or Polytetrafluorethylene gasket in full.

PTFE can be defined or described as a sealing material that is high-performance in nature.

It is usually used in inducstries such as chemical, petrochemical or pharmaceuticaal companies.

The yellow dot and yellow sticker is used to create an indicator that is visual to ensure that the corect sealing element is being utilized accordingly.

Thus, it is correct to state that the sealing element that is indicated by a yellow dot and yellow sticker is known as a PTFE or Polytetrafluorethylene gasket .

Learn more about PTFE at:

https://brainly.com/question/17216080

#SPJ1

Sure, here are the seven ways that data loss can happen and how to prevent them:

1. Accidental Deletion: This happens when a user unintentionally deletes important files or folders. To prevent this, users should be cautious while deleting files and ensure that they have a backup of important files.

2. Hardware Failure: Hard drive failure or damage to storage devices can result in data loss. To prevent this, users should use reliable hardware and have a backup of important files.

3. Malware or Virus: Malware and viruses can corrupt or delete data. To prevent this, users should use antivirus software and keep it up-to-date.

4. Natural Disasters: Natural disasters like floods, fires, or earthquakes can damage hardware and lead to data loss. To prevent this, users should keep backup copies of data in off-site locations.

5. Theft: Theft of hardware devices like laptops or external hard drives can lead to data loss. To prevent this, users should keep their devices secure and encrypt sensitive data.

6. Power Outages: Power outages can result in data loss due to unsaved work or corrupted files. To prevent this, users should use uninterruptible power supplies (UPS) to provide backup power during outages.

7. Human Error: Human error can result in data loss due to mistakes like overwriting important files or misconfiguration of settings. To prevent this, users should have proper training and follow best practices while handling data.

Learn More about Malware here :-

https://brainly.com/question/29650348

#SPJ11

The two fundamental approaches to bandwidth usage on a network are: Circuit-switching: In circuit-switching, a dedicated communication path is established between the sender .

the receiver for the duration of the communication session. This path remains reserved exclusively for the sender and receiver for the entire duration of the communication, regardless of whether data is being transmitted or not. Circuit-switching is commonly used in traditional telephone networks, where a dedicated line is established for a call, and the bandwidth is reserved for the duration of the call, even if there is silence or no data transmission. Packet-switching: In packet-switching, data is divided into small packets and transmitted over the network individually. Each packet contains the necessary addressing information for routing, and the packets are independently routed over the network based on the destination address. Packets from different sources can share the same network resources, such as bandwidth, and they can take different routes to reach the destination. Packet-switching is the dominant approach used in modern computer networks, including the Internet, as it allows for more efficient use of network resources and supports multiple concurrent communications over a shared medium.

learn more about   bandwidth  here:

https://brainly.com/question/28436786

#SPJ11

A proportional controller with a gain of at least Kp=1 is suitable to design the simplest controller with zero steady-state error.

A proportional controller with a gain of at least Kp=1 is suitable to design the simplest controller with zero steady-state error. This means that the output of the controller is directly proportional to the error between the setpoint and the process variable.

By setting the proportional gain to at least 1, the controller will be able to eliminate steady-state error for a unit step input. However, it is important to note that a proportional controller alone may not provide adequate control performance for more complex systems with significant process dynamics.

Read more about controller

brainly.com/question/30359465

#SPJ4

Exercises are an important part of creating a disaster recovery plan because they:

1. Test the effectiveness of the plan: By conducting exercises, you can identify any weaknesses or gaps in your disaster recovery plan, allowing you to make necessary adjustments to ensure its effectiveness.

2. Familiarize team members with the plan: Exercises provide an opportunity for team members to learn their roles and responsibilities in the recovery process, which helps ensure a smoother response during an actual disaster.

3. Improve communication and coordination: Practicing the disaster recovery plan helps to improve communication and coordination among team members, departments, and external partners, which is crucial for a successful recovery effort.

4. Build confidence in the plan: Exercises help to build confidence in the disaster recovery plan, ensuring that team members trust the procedures and are more likely to follow them during a real disaster.

5. Meet compliance requirements: Some industries and organizations are required to conduct regular disaster recovery exercises to meet compliance standards, such as those set by government agencies or industry-specific regulations.

By incorporating exercises into your disaster recovery plan, you can improve the overall preparedness of your organization and increase the likelihood of a successful recovery following a disaster.

To know more about disaster recovery

https://brainly.com/question/31364849?

#SPJ11

Socket F (1207FX) is a type of CPU socket used for AMD processors. It has 1207 pins and is designed for use with server-class processors. Socket F is also known as Socket 1207FX and supports quad-core and dual-core processors with the AMD64 architecture. It was introduced in 2006 and is now mostly replaced by the newer Socket G34.

What is Socket F (1207FX)
Socket F (1207FX) is a type of CPU socket used for connecting a processor to a motherboard. It has 1207 contact points (or pins) and is specifically designed for AMD Opteron processors, particularly the 2000 and 8000 series. This socket enables efficient data transfer and communication between the CPU and other components on the motherboard, ensuring smooth overall system performance.

Socket F (also known as Socket 1207FX) is a CPU socket that was introduced by AMD in 2006 for their Opteron 2000 and 8000 series processors. Socket F was designed to support multi-socket configurations and high-speed DDR2 memory, and it replaced the older Socket 940.

Socket F has 1207 pins, hence the name "1207FX." It is a land grid array (LGA) socket, which means that the pins are located on the socket instead of the CPU. This design allows for more precise alignment and better heat dissipation, which is particularly important for high-end server applications.

to know more about  AMD processors:

https://brainly.com/question/31540619

#SPJ11

If there is a DC power failure, the electric pumps may no longer function, and the hydraulic system may lose pressure and become inoperative.

We have,

Many hydraulic systems on aircraft rely on electrically-driven pumps to provide the pressure needed to operate the hydraulic components.

If there is a DC power failure, the electric pumps may no longer function, and the hydraulic system may lose pressure and become inoperative.

However, many aircraft hydraulic systems have backup systems that can operate in the event of a power failure.

For example, some hydraulic systems may have standby hydraulic pumps that are driven by an alternate power source, such as a hydraulic accumulator, to provide hydraulic pressure.

Other aircraft may have a hydraulic hand pump that can be manually operated to provide hydraulic pressure in the event of an electrical power failure.

Thus,

In the event of a DC power failure, the hydraulic system in an aircraft may be affected depending on the specific design of the hydraulic system and the backup systems available.

Learn more about the hydraulic systems here:

https://brainly.com/question/30615986

#SPJ4

The threshold temperature that causes the illumination of the fire warning light refers to the specific temperature at which the fire warning system detects a potential fire hazard and activates the light as a visual alert.

This threshold temperature varies depending on the specific fire warning system in use and the location where it is installed. To determine the exact threshold temperature for your system, you would need to consult the manufacturer's guidelines or specifications for your particular device.

To knoe more about threshold temperature

https://brainly.com/question/28207509?

#SPJ11

The statement "The three principal ways in which a load may be applied to a material are torsion, compression, and shear" is true.

Here's an explanation of each term:
1. Torsion: A twisting force that is applied to a material, causing it to rotate around its axis.
2. Compression: A force that pushes or squeezes a material together, reducing its size in the direction of the applied force.
3. Shear: A force that causes two parts of a material to slide past each other, resulting in deformation.

These are the three main ways a load can be applied to a material, causing different types of stress and deformation.

To know more about load

https://brainly.com/question/20039214?

#SPJ11

Grain boundaries are generally more chemically reactive than the grains themselves. This is because atoms near the grain boundaries tend to have less regular (and thus unsatisfied) .

bonds compared to the atoms within the grains. This unsatisfied bonding can result in higher reactivity and susceptibility to chemical reactions, making grain boundaries more chemically reactive than the grains. Grain boundaries are  chemically reactive than the grains themselves, due to atoms near the grain boundaries having less regular (thus unsatisfied) bonds.

learn more about  Grain boundaries    here:

https://brainly.com/question/31420865

#SPJ11

Answer:

h1 = 1.4545h1 - 0.2273

h1 = 0.2727 m

Explanation:

To solve this problem, we can use the concept of continuity equation, which states that the flow rate of water is constant along the channel. The flow rate can be calculated as the product of the cross-sectional area of flow and the velocity of flow.

Let's first calculate the cross-sectional area of flow in the trapezoidal channel. The side slopes of 1.5h:1v mean that the ratio of the height to the top width of the trapezoid is 1.5:1. Let h be the depth of flow, and b be the bottom width of the trapezoid. Then we have:

h/b = 1.5/1

h = 1.5b

The area of the trapezoid can be calculated as:

A = (1/2)(b1 + b2)h

= (1/2)(4.3 + 4.3 + 1.5h)(h)

= (1/2)(8.6 + 1.5h)(h)

= 4.3h + 0.75h^2

Substituting the given values, we get:

A = 4.3(2.2) + 0.75(2.2)^2

= 11.99 m^2

The flow rate can be calculated as:

Q = Av

= 11.990.17

= 2.0383 m^3/s

Now, let's consider the bridge placed in the middle of the channel. The cross-sectional area of flow upstream and downstream of the bridge should be equal to maintain continuity of flow. Let's assume that the depth of flow adjacent to the pier is h1, and the width of the pier is w. Then the cross-sectional area of flow upstream of the pier can be calculated as:

A1 = (1/2)(4.3 + 1.5h1)(h1)

= 2.15h1 + 0.75h1^2

The cross-sectional area of flow downstream of the pier can be calculated as:

A2 = (1/2)(4.3 + 1.5h2)(h2)

= 2.15h2 + 0.75h2^2

Since the flow rate is constant, we have:

A1v1 = A2v2

The velocity of flow can be assumed to be the same upstream and downstream of the pier, since the water level is expected to be constant. Therefore, we have:

v1 = v2 = 0.17 m/s

Substituting the given values and solving for h2, we get:

h2 = (4.3 + 1.5h1 - w)(h1)/(4.3 + 1.5h1 + w)

Now, we can use this equation to calculate the depth of flow adjacent to the pier for different values of w. For example, if we assume w = 0.5 m, we get:

h2 = (4.3 + 1.5h1 - 0.5)(h1)/(4.3 + 1.5h1 + 0.5)

= 1.4545h1 - 0.2273

To find the maximum value of w that will not cause a rise in the water surface upstream of the pier, we need to find the value of w that makes h2 = h1. This gives:

The "strain offset" method, also known as the "0.2% offset method" or "yield offset method," is often used to determine the yield strength of a material in materials testing.

It involves plotting the stress-strain curve of a material and identifying the point at which the stress deviates by a certain offset (usually 0.2%) from the linear portion of the curve. This offset is typically used to determine the yield strength of a material, which is the stress at which plastic deformation begins and the material transitions from elastic to plastic behavior. The strain offset method is a common approach used to determine the yield strength of materials in tensile testing, and it is widely used in materials science and engineering to characterize the mechanical properties of materials.

learn more about  "strain offset   here:

https://brainly.com/question/29694938

#SPJ11

A word processing package is a software program that allows users to create, edit, and format text documents. There are several features of a word processing package that could be useful for an office environment.


1. Document Formatting: Word processing packages offer a range of formatting tools that allow users to create professional and organized documents. This includes adjusting fonts, text sizes, and line spacing, as well as inserting headers, footers, and page numbers. Additionally, users can create tables, bulleted and numbered lists, and apply various styles to enhance the document's appearance. This feature is beneficial for the office as it enables employees to create consistent and visually appealing documents.

2. Collaboration and Reviewing: Modern word processing packages often provide collaboration features, allowing multiple users to work on the same document simultaneously. This promotes teamwork and efficiency, as colleagues can contribute, edit, and review documents in real-time. Furthermore, reviewing tools, such as Track Changes and Comments, enable users to provide feedback and make suggestions directly within the document. This streamlines the editing process and ensures clear communication among team members.

In summary, document formatting and collaboration/reviewing features in a word processing package are valuable for office environments, as they enable the creation of professional documents and promote efficient teamwork.

Learn more about document here: brainly.com/question/12401517

#SPJ11

Open-Web Steel Joist construction is typically found in commercial and industrial buildings, such as warehouses, factories, and retail centers. These joists are often used to support the roof and floor systems in these types of structures.

Steel joists with an open web design are used in a specific kind of structural system known as open-web steel joist construction.

The steel joists' open-web shape makes them perfect for use in these kinds of structures since it offers an effective and lightweight option for bridging substantial distances.

A structure's overall weight can be decreased by using Open-Web Steel Joist construction, which is particularly advantageous in structures with wide spans or intricate layouts.

Due to its adaptability, strength, and effectiveness, open-web steel joist architecture is a well-liked option for commercial and industrial buildings.

Learn more about Open-Web Steel Joist:

https://brainly.com/question/29999823

#SPJ11

This algorithm is called a "Least Recently Used" (LRU) algorithm. It ensures that the items that have been accessed recently are kept at the top of the cache, making them easier and faster to retrieve.

Once the cache limit has been reached, the algorithm removes the items that have been accessed the least, freeing up space for new items to be added. The LRU algorithm is commonly used in computer systems to manage memory and improve system performance.

What is the least recently used algorithm?

Least Recently Used (LRU) is a common caching strategy. It defines the policy to evict elements from the cache to make room for new elements when the cache is full, meaning it discards the least recently used items first. Let's take an example of a cache that has a capacity of 4 elements.

to know  more about the algorithm:

https://brainly.com/question/22984934

#SPJ11

The correct answer is A) 90 degrees.

Torque (τ) on a current-carrying loop in a magnetic field is given by the formula τ = μ x B, where μ is the magnetic moment, B is the magnetic field vector, and x represents the cross product. The magnitude of the torque is given by τ = μBsinθ, where θ is the angle between the magnetic moment and the magnetic field vector.

In order to maximize the torque, sinθ should be at its maximum value, which is 1. This occurs when the angle θ is 90°. Therefore, the maximum torque on a current-carrying loop occurs when the angle between the loop's magnetic moment and the magnetic field vector is 90°.

Learn more about Torque: https://brainly.com/question/17512177

#SPJ11

A consequence of the type of atomic bonding within most ceramics is their typically high melting points and brittleness. Ceramics are often composed of ionic or covalent bonds between atoms.

Ionic bonds occur when there is a transfer of electrons from one atom to another, resulting in positively charged cations and negatively charged anions that are held together by electrostatic forces. Covalent bonds occur when atoms share electrons to form a stable bond.

The ionic or covalent bonding in ceramics tends to result in a rigid and tightly packed crystal structure with strong chemical bonds, which gives ceramics their characteristic properties. However, this type of atomic bonding also has consequences:

High melting points: Ceramics often have high melting points due to the strong ionic or covalent bonds between atoms. This means that ceramics generally require high temperatures to melt or deform, which can limit their processability and ease of shaping compared to other materials.

Brittle behavior: Ceramics are known for their brittle behavior, meaning that they tend to fracture rather than deform under stress. This is because the ionic or covalent bonds in ceramics are strong, but also brittle, and do not allow for much plastic deformation. This makes ceramics susceptible to cracking or breaking under applied stress, which can limit their use in certain applications that require toughness or resistance to impact.

Low ductility: Ceramics typically have low ductility, which refers to their ability to stretch or deform without fracturing. This is again due to the strong and brittle nature of the atomic bonds in ceramics, which limits their ability to undergo plastic deformation without fracturing.

learn more about   Ceramics  here:

https://brainly.com/question/13508244

#SPJ11

The following must be written on lift landing signs, according the 1968 Fire Code: "In case of fire, do not use lift.

Employ stairs. This is done to make sure that patrons are aware that during a fire emergency, the building should not be evacuated using a lift.

Elevators can be hazardous to use and are not intended for use during a fire emergency. As a result, in order to comply with the 1968 Fire Code, lift landing signs must clearly direct passengers to take the stairs in the case of a fire.

Learn more about   Employ stairs at:

https://brainly.com/question/1497291

#SPJ4

Quartz and glass-panel electric units are classified as radiant heaters. These heaters use infrared radiation to transfer heat directly to objects and people, providing efficient and targeted warmth.

How can we explain radiant heaters?

Radiant heaters are a type of heating system that works by emitting infrared radiation to warm up objects and people in a room rather than heating up the air itself. This makes them an efficient and effective option for heating small spaces as well as outdoor areas like patios and garages.

Radiant heaters come in a variety of forms, including electric, gas, and propane. Electric radiant heaters use electricity to generate heat, while gas and propane radiant heaters burn fuel to create heat. Some models are designed to be mounted on walls or ceilings, while others are portable and can be moved around as needed.

The way radiant heaters work is by emitting infrared radiation, which is absorbed by objects and people in the room. This causes the objects to warm up, and the heat is then radiated back into the room. Unlike traditional forced-air heating systems, which heat up the air and rely on fans to distribute the warm air throughout a space, radiant heaters provide direct, localized heat to the objects and people in a room.

to know more about radiant heaters:

https://brainly.com/question/17190698

#SPJ11

Fire Wardens are not required to be the first to leave the floor during alarms to set an example. Thus, its D.

In fact, Fire Wardens should remain on their floor until all occupants have been safely evacuated and accounted for, as their primary responsibility is to assist with the safe and orderly evacuation of the building. They should also be available to answer questions from occupants and provide additional assistance as needed.

Fire Wardens are designated personnel responsible for assisting with the safe evacuation of a building during a fire or other emergency. They are trained to respond to fire emergencies and to help coordinate the implementation of the building's Emergency Action Plan (EAP).

Learn more about Fire Wardens, here

https://brainly.com/question/14391851

#SPJ4

Here is a Python program that prompt user to enter the number of items to store in an array using while loop:

# Prompt the user to enter the number of values to store in the array

numOfValues = int(input("Enter the number of values to store in the array: "))

# Use a while loop to confirm the number of values is greater than 0 and less than or equal to 20

while numOfValues <= 0 or numOfValues > 20:

   print("Number of values must be greater than 0 and less than or equal to 20.")

   numOfValues = int(input("Enter the number of values to store in the array: "))

Python is a high-level, interpreted programming language that was first released in 1991 by Guido van Rossum.

It is designed to be easy to read and write, with a simple and elegant syntax that emphasizes code readability and reduces the cost of program maintenance.

Python is an open-source language, which means that the source code is freely available to anyone and can be modified and distributed without restrictions.

Learn more about while loop here:

https://brainly.com/question/19344465

#SPJ4

The transmission method that uses fixed-length time slots and relies on a common clock source in the network is Time-Division Multiplexing (TDM). In TDM, multiple data streams are interleaved into fixed-length time slots,

and these time slots are transmitted sequentially over a shared communication channel. Network devices, such as switches or multiplexers, rely on a common clock source to ensure proper synchronization of the time slots, allowing for efficient and synchronized transmission of multiple data streams over the same channel. TDM is commonly used in various communication systems, including telecommunication networks and digital voice or data communication.

learn more about   transmission  here:

https://brainly.com/question/15884673

#SPJ11

Ductile fracture occurs when a material undergoes a significant amount of plastic deformation before rupturing. It is typically observed in materials that can absorb a large amount of energy before failure, such as metals, due to their ability to deform under stress without breaking. Here are some statements that correctly describe ductile fracture:

1. Ductile fracture is a slow and gradual process that occurs over an extended period of time, rather than a sudden and catastrophic failure.
2. The material experiences significant deformation and necking before it ruptures, which is a result of the material becoming thinner and elongated in the area of highest stress.
3. A ductile fracture is characterized by a cup and cone-shaped fracture surface, which indicates the presence of plastic deformation and tearing of the material.
4. The failure of the material occurs at a lower stress than for a brittle fracture due to the material's ability to deform plastically, which helps to redistribute the stress within the material.
5. Ductile fracture can be desirable in some applications, such as when a material is required to absorb energy without breaking, such as in automotive safety components.

Overall, ductile fracture is a result of the material's ability to deform plastically, which leads to a slow and gradual failure process that can be beneficial in some applications.

For such more question on Ductile

https://brainly.com/question/4701542

#SPJ11