Which two protests evolved from symbolic relationships of organism which resulted in eukaryotic organisms chloroplast

use a strong base to neutralize, like NaOH, KOH, etc

Answer:

500ml or 0.5l

Explanation:

The concentration is 0.40 M so there are 0.40 moles in 1 l of the solution.

0.40 moles -> 1 l

but we have to go to 0.20 moles, 0.40/2 = 0.20 moles but we have to divide the volume also by 2 that makes 0.5 liters.

Answer: 0.5

Explanation:

The concentration is 0.40 M so there are 0.40 moles in 1 l of the solution.

0.40 moles -> 1 l

but we have to go to 0.20 moles, 0.40/2 = 0.20 moles but we have to divide the volume also by 2 that makes 0.5 liters.

Answer:

atomic mass = 16 amu

Explanation:

The atomic mass is the total protons and neutrons in an element. The atomic number represents the total number of protons.

In this form, the superscript (raised exponent) represents the mass number/atomic mass. The subscript represents the atomic number. Therefore, if the number (16) is the superscript, this must be your answer.

¹⁶₈Z  
-----> 16 = mass number/ atomic mass
-----> 8 = atomic number

10 mol of H₂ required to produce 5 moles of methane (CH₄)  

Mole Ratio is a conversion factor between compounds in a chemical reaction, that is derived from the coefficients of the compounds in a balanced equation.

The mole ratio is therefore used to convert between quantities of compounds in a chemical reaction.

Given reaction ;

                                                  C + 2H₂ -------> CH₄  

from reaction                              2 mol           1 mol

from the question                      x mol           5 mol                       (given)

Now,

x = 2 x 15 / 1 = 10 mol

                     = 10 mol of H₂.

Hence, 10 mol of H₂ required to produce 5 moles of methane (CH₄)  

Learn more about mole here ;

https://brainly.com/question/20486415

#SPJ1

Oxygen is an example of a diatomic element.

[tex](115.00)(0.25)+(117.00)(0.75)=\boxed{116.50 \text{ u}}[/tex]

Answer:

0.057 M

Explanation:

To find the new molarity, you need to (1) find the moles (via the molarity equation using the old molarity and volume) and then (2) calculate the new molarity (via the molarity equation using the combined volume and old moles).

(Step 1)

60 mL / 1,000 = 0.06 L

Molarity (M) = moles / volume (L)

1.0 M = moles / 0.06 L

(1.0 M) x (0.06 L) = moles

0.06 = moles

(Step 2)

0.06 L + 1 L = 1.06 L

Molarity (M) = moles / volume (L)

Molarity = 0.06 moles / 1.06 L

Molarity = 0.057 M

Answer:

The energy will be added  

Explanation:

The molar mass of gas is 6.48 g/mol

Graham's law of diffusion states that the rate of diffusion of a gas is inversely proportional to the density of the gas.

The molar mass of Hydrogen gas = 2

R2/R1 = 1.8

Molar mass of gas = 2 × 1.8 × 1.8

Molar mass of gas = 6.48 g/mol

Learn more about Graham's law at: https://brainly.com/question/15476873

#SPJ1

Answer:

The unknown metal could be calcium or magnesium.

Explanation:

Displacement of a metal from its chemical reaction is shown by the reaction known as single displacement reaction. The reactivity of metal is determined by the reactivity series. The metals lying above in the series are more reactive than the metals which lie below in the reactivity series.

Metal B is more reactive than metal A.

The metal which easily displaced aluminium will lie above in the series but that same element cannot displace sodium, so it will lie below in the series.

Hence, from the series, we conclude that the unknown metal could be calcium or magnesium.

An alpha helix which is 18 amino acids long will have 12 hydrogen bonds.

The alpha helix (α-helix) is a common in the secondary structure of proteins and is a right hand-helix conformation in which every backbone N−H group hydrogen bonds to the backbone C=O. group of the amino acid located four residues earlier along the protein sequence.

The alpha helix is stabilized by hydrogen bonds (shown as dashed lines) from the carbonyl oxygen of one amino acid to the amino group of a second amino acid.

Because the amino acids connected by each hydrogen bond are four apart in the primary sequence, these main chain hydrogen bonds are called "n to n+4.

Learn more about protein structure here ;

https://brainly.com/question/14652022

#SPJ1

Explanation:

The SI Unit of sound is decibel.

or we can say that

The SI Unit of sound is watt per square metre (i.e.w/m2).

The quantum numbers are used to describe the position of an electron in atom.

The quantum numbers are used to describe the position of an electron in atom. I have attached a picture that shows the complete question.

For the 1s orbital;

n =1

l = 0

ml = 0

ms = ±1/2

For the 2s orbital;

n = 2

l = 1

ml = -1, 0, 1

ms = ±1/2

Learn more about quantum numbers:https://brainly.com/question/18835321

#SPJ11

The number of moles of [tex]Na_2SO_4[/tex] form from 5.0 moles [tex]Na_2S[/tex] is 5 moles.

Limiting reactants are those reactants that are completely used up in a chemical reaction.

4.0 mol [tex]Na_2S[/tex] will be completely used since the combining ratio is 1 : 1 : 1.

[tex]Na_2S + CuSO_4[/tex] ->[tex]Na_2SO_4 + CuS[/tex]

From the chemical equation above, 5.0 moles [tex]Na_2S[/tex] will yield 5 moles of [tex]Na_2SO_4[/tex].

Learn more about limiting reactants here:

brainly.com/question/14222359

#SPJ1

The relationship between [tex][Ca2^{2+}][/tex] and [tex][OH^{-}][/tex] in this mixture is that there are 2 mole of hydroxide ions for every 1 mole of calcium ions.

The solubility of a solute is the amount of solute that can dissolve in a given volume of solvent at a particular temperature.

Calcium hydroxide is partially soluble in water. The dissolution of calcium hydroxide in water produces calcium ions and hydroxide ions.

The equation  of the reaction is given below:

[tex]Ca(OH)_{2} \leftrightharpoons Ca^{2+} + 2\:OH^{-}[/tex]

Based on the equation of reaction, there are 2 mole of hydroxide ions for every mole of calcium ions.

Learn more about solubility at: https://brainly.com/question/7176737

#SPJ11

Answer:

The Coefficient is 1

Explanation:

Taking into account the reaction stoichiometry, 8 moles of Ag can be produced from 8 moles of AgNO₃ and 5 moles of Zn.

In first place, the balanced reaction is:

2 AgNO₃ + Zn → 2 Ag + Zn(NO₃)₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 1 mole of Zn reacts with 2 moles of AgNO₃, 5 moles of Zn reacts with how many moles of AgNO₃?

[tex]amount of moles of AgNO_{3}= \frac{5 moles of Znx2 moles of AgNO_{3}}{1 mole of Zn}[/tex]

amount of moles of AgNO₃= 10 moles

But 10 moles of AgNO₃ are not available, 8 moles are available. Since you have less moles than you need to react with 5 moles of Zn, AgNO₃ will be the limiting reagent.

Considering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 2 moles of AgNO₃ form 2 moles of Ag, 8 moles of AgNO₃ form how many moles of Ag?

[tex]amount of moles of Ag=\frac{8 moles of AgNO_{3}x2 moles of Ag }{2 moles of AgNO_{3}}[/tex]

amount of moles of Ag= 8 moles

Then, 8 moles of Ag can be produced from 8 moles of AgNO₃ and 5 moles of Zn.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Answer:

13448

Explanation:

i think im wrong but

164(82)=13448

it's 82g/mol) for this question

Respiration is the process of oxidation of food materials like glucose, Amino acids, fatty acids to water and carbon dioxide. Respiration does not require any external heat to carry on the process. Combustion is only done by applying external heat to the sugar molecule to burn.

The theoretical yield of NaBr given that 2.36 moles of FeBr₃ reacts is 7.08 moles

2FeBr₃ + 3Na₂S → Fе₂S₃ + 6NaBr

From the balanced equation above,

2 moles FeBr₃ reacted to produce 6 moles of NaBr

From the balanced equation above,

2 moles FeBr₃ reacted to produce 6 moles of NaBr

Therefore,

2.36 moles FeBr₃ will react to produce = (2.36 × 6) / 2 = 7.08 moles of NaBr

Therefore,

Thus, the theoretical yield of NaBr is 7.08 moles

Learn more about stoichiometry:

https://brainly.com/question/14735801

#SPJ1

Answer:

7.08

Explanation:

Answer:

C. Battery acid burning the floor

Explanation:

C. Battery acid burning the floor

in combustion fire is created

Battery acid burning the floor is NOT an example of combustion occurring.

The answer is option C.

Combustion is a chemical process or a reaction between the gas (Hydrocarbon) and Oxygen. while gasoline and oxygen react it releases warmth and light energy. heat and light energy then result in the flame. So, the system for Combustion reaction is Hydrobcarbon + Oxygen = warmness electricity.

Combustion in daily existence examples is: Burning of wooden or Coal for the family functions. Burning of Petrol or Diesel for using vehicles like vehicles. Combustion of herbal gas or LPG.

Learn more about combustion here:-https://brainly.com/question/25141046

#SPJ2

Answer:

Explanation:

i ned help

Answer:

"A", "water changes from a gas to a solid to a liquid", according to this phase diagram, at at 0°C, as pressure is increased from 0atm to 10atm.

Explanation:

The question asks what happens at 0°C, as pressure is increased from 0atm to 10atm.

According to the question, the temperature is held constant.  The pressure changes.  In the phase diagram, we find the temperature 0°C on the horizontal axis, and all points where the temperature are 0°C are along that vertical line.

Since the pressure starts at 0atm and increases to 10atm, we start at the bottom, and move upward along that line, to see what phases of matter the substance changes to.

At the bottom, it is initially in a "gas" phase.  As it moves up, it transitions to a "solid" phase.  Later, as it continues moving up, it changes again into a "liquid" phase.

Thus, the answer would be "A", "water changes from a gas to a solid to a liquid", according to this phase diagram, at at 0°C, as pressure is increased from 0atm to 10atm.

Carbon monoxide blocks oxygen in the blood. Hence, option A is correct.

Combustion is a chemical process or a reaction between Fuel (Hydrocarbon) and Oxygen.

During incomplete combustion part of the carbon is not completely oxidized producing carbon monoxide (CO). Incomplete combustion uses fuel inefficiently and carbon monoxide is released.

Carbon monoxide gas diffuses rapidly across the pulmonary capillary membrane, binding to haemoglobin with an affinity 200 times that of oxygen to form carboxyhemoglobin. By displacing oxygen, CO decreases the oxygen-carrying capacity and oxygen delivery to tissues, causing marked cellular hypoxia and acidosis.

Hence, option A is correct.

Learn more about combustion here:

https://brainly.com/question/15117038

#SPJ1

Answer:

32.0 is the answer which is divide able to 65 or -85

Answer:

-40.0 °C

Explanation:

Change in temperature can be written as [tex]\displaystyle{\Delta T = T_2-T_1}[/tex]. The variables are defined below here:

[tex]\displaystyle{\Delta T}[/tex] means change in temperature.

[tex]\displaystyle{T_2}[/tex] means the final temperature value.

[tex]\displaystyle{T_1}[/tex] means the initial temperature value.

From the question, we know the temperature changes from 65.0 °C to 25.0  °C. Therefore, our initial temperature is 65.0 °C and final temperature is 25.0 °C.

Hence:

[tex]\displaystyle{\Delta T=25.0-65.0}\\\\\displaystyle{\Delta T = -40.0}[/tex]

Therefore, the change in temperature is -40.0 °C.

Explanation:

(1)It is easily reversable, example: the melting of ice.

(2)It produces no new substance example: all cases of melting of solid to liquid.

(3) There is no change in the mass of the substance

example: the magnetization of iron.

(1)It is not easily reversable, example: all cases of burning.

(2) new substance are produced example: rusting of iron.

(3) There is change in the mass of the substance, example : slaking of lime.

[tex]C_{3} H_{8} +5O_{2}[/tex]→[tex]3CO_{2} +4H_{2} O[/tex]

The given reaction is of complete combustion of propane in presence of oxygen.

Molecular formula of propane gas= [tex]C_{3} H_{8}[/tex]

Combustion is a oxidation of a organic molecule into carbon dioxide and water .

Here oxygen serves as a oxidizing agent and oxidizes propane into carbo dioxide and water molecule.

The unbalanced reaction can be given as:

[tex]C_{3} H_{8} +O_{2}[/tex] →[tex]CO_{2} +H_{2} O[/tex]

Here, 3 carbons are there in propane.

so, 3 carbon dioxide molecules are formed to balance the reaction.

So, when 3 carbon dioxides are formed 3 oxygen molecules also needed.

Due to presence of 8 hydrogen in propane 4 water molecules forms , which contains 4 O means 2 oxygen molecules .

There for, total 5 molecules of oxygen are needed to balance the equation.

The final balanced equation can be given as..

[tex]C_{3} H_{8} +5O_{2}[/tex]→[tex]3CO_{2} +4H_{2} O[/tex]

Learn more about combustion here...

https://brainly.com/question/23992512

#SPJ10