Which statement best describes a heart attack?

A. Certain blood vessels expand

B. Certain blood vessels shrinks

C. Blood vessels are normal

D. Certain blood vessels are blocked by fatty acids

Answers

Answer 1

Answer:

I think number D is correct

Answer 2

Answer:

D. Certain blood vessels are blocked by fatty acids

Explanation:

A heart attack occurs when the flow of blood to the heart is blocked. The blockage is most often a buildup of fat, cholesterol and other substances, which form a plaque in the arteries that feed the heart (coronary arteries). Sometimes, a plaque can rupture and form a clot that blocks blood flow.


Related Questions

An ionic compound and a covalent compound are dissolved in separate beakers of H2O. Which solution will conduct an electric current?

Answers

Answer:

ionic compound

Explanation:

An ionic compound and a covalent compound react differently when dissolved in water (H2O).

The ionic compounds when dissolved in H2O, undergo a physical change called dissociation. In this change the molecules of water surround the ionic compound and ions of ionic compound disperse  uniformly in the water. The complete dissociation of ionic compounds in H2O makes it a strong electrolyte and solution will conduct an electric current.

Some of the covalent compounds also conduct electricity as when they dissolve in H2O, the molecule of covalent compound react chemically with the solvent to produce ions. Generally, covalent compounds are weak electrolytes and do not conduct much electricity as ionic compounds but exception are their such as HCl and benzene.

A student sets up a box with a flashlight that shines on a mirror located at position X. Other possible locations for objects in the box are labeled A-E.

How can the student place objects in the box to have all the light from the flashlight shine back on the flashlight?

Answers

Answer:

If all the objects are placed at the same angle.

Explanation:

If all the objects are placed at the same angle so all the light from the flashlight shine comes back to the flashlight. If the A object is placed at the specific location at which the mirror X reflects the light after hitting it, then the other E object is placed at the location where the light comes after reflecting the A object then the light comes back to the flashlight if the angle between objects placement is right.

Answer:

d

Explanation:

dicotyledonous plants

Answers

The dicotyledons, also known as dicots, are one of the two groups into which all the flowering plants or angiosperms were formerly divided. The name refers to one of the typical characteristics of the group, namely that the seed has two embryonic leaves or cotyledons.

I NEED HALPPPPPP PLEASE

Question 1 options:

instant tea


water


Question 2 options:

instant tea


water


Question 3 options:

mixture


solution

Answers

question 1 water question 2 instant tea question 3 mixture

How many atoms are in phosgene

Answers

Answer:

3 atoms

Explanation:

there is one calcium and two chlorine

How many CaF are in a 1.7x10^25 please I need help fast!!

Answers

Answer:

28 mol CaF

General Formulas and Concepts:

Math

Pre-Algebra

Order of Operations: BPEMDAS

Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right

Chemistry

Atomic Structure

Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.

Stoichiometry

Using Dimensional AnalysisExplanation:

Step 1: Define

[Given] 1.7 × 10²⁵ molecules CaF

[Solve] moles CaF

Step 2: Identify Conversions

Avogadro's Number

Step 3: Convert

[DA] Set up:                                                                                                          [tex]\displaystyle 1.7 \cdot 10^{25} \ molecules \ CaF(\frac{1 \ mol \ CaF}{6.022 \cdot 10^{23} \ molecules \ CaF})[/tex][DA] Multiply/Divide [Cancel out units]:                                                         [tex]\displaystyle 28.2298 \ moles \ CaF[/tex]

Step 4: Check

Follow sig fig rules and round. We are given 2 sig figs.

28.2298 mol CaF ≈ 28 mol CaF

Judy's brand new Lamborghini car travels 280 km in 4 hours. What is its average speed?

Answers

Speed= distance/time
Speed= 280/4
Speed= 70km/hr

2H2(g)+O2(g)→2H2O(l)

What is the mass of water, H2O(l) , produced when 5.70 g of O2(g) reacts with excess H2(g)?

Answers

Answer:

6.4g

Explanation:

32g of O2 produce 36g of H2O/5.70g of O2 produce x the answer is 6.4g

The following conditions must be met before a standard calibration curve equation can be used to solve for the concentration of an unknown solution:

a. The same instrument must be used to measure the unknown solution as was used to measure the known (standard) solutions that were used to create the calibration curve.
b. The analyte in the unknown solution must be the same analyte (or type of analyte) that is present in the known (standard) solutions that were used to create the calibration curve.
c. The equation from the calibration curve can only be linear.
d. Domain and range restrictions must be observed.

Answers

Answer:

The same instrument must be used to measure the unknown solution as was used to measure the known (standard) solutions that were used to create the calibration curve.

The analyte in the unknown solution must be the same analyte (or type of analyte) that is present in the known (standard) solutions that were used to create the calibration curve.

Domain and range restrictions must be observed.

Explanation:

Calibration curves are tools necessary in understanding the instrumental response for any analyte.

A calibration curve is obtained by preparing a set of  standard solutions with known concentrations of the analyte. The instrument response for each concentration is measured  and plotted against the concentration of the standard solution. The linear portion of this plot may be used to determine the unknown concentration of a sample of the analyte.  

The equation of the best-fit line is  used to determine the concentration of the unknown sample.

Can someone please help me with this I’ll mark brainliest, in the boxes below label what level of organization might look like?

Answers

Answer:

Vascular tissue transports water, minerals, and sugars to different parts of the plant. Vascular tissue is made of two specialized conducting tissues: xylem and phloem. Xylem tissue transports water and nutrients from the roots to different parts of the plant, and also plays a role in structural support in the stem.

Explanation:

HOPE THIS HELPS!

what is the smallest substance?
1 .mixture
2 .compound
3 .element

Answers

Number 3 it’s element
Element!!!!!!!!!!!!!!








which one of the following a compounds a.sugar b.rock salt c.iron d.alloy
which one of the following a
compound ?
a.sugar c.alloy
brock salt d.iron

Answers

Answer:

a

Explanation:

sugar is composed of different elements combined in a manner form

A chemical supply company sells sulfuric acid
(H2SO4) in a concentration of 4.00 M. What
volume of this solution would you need to make
12.0 mL of a 0.50 M H2SO4 solution?
Which equation should you use?

Answers

Answer:

A.

1.5

B

Explanation:

Read: https://kids.britannica.com/kids/article/DNA/390730 (Links to an external site.)

Answer the following questions:

1. What sort of things does DNA determine for a creature? (Think physical traits)

2. Sometimes there are mistakes in DNA, what are these mistakes called? what sort of things can these mistakes cause?

3. What makes up the sides of the DNA structure?

4. There are four different bases in DNA: adenine, thymine, guanine, and cytosine. About how many total pairs do humans have in their DNA?

Answers

Answer:

im not doing your whole homework. but ill give you  one cent ;>, whats ur paypal

Explanation:

I need help answering number 14 A B and C. Thank you!

Answers

Answer:

Explanation:

TiO2 + C + 2 CI2 → TiCI4 + CO2

(a)

(2.16 mol TiO2) x (2 mol CI2 / 1 mol TiO2) x ( 70.9064 g C/mol) = 306 g CI2

(b)

(2.16 mol TIO2) x (1 mol C / 1 mol TiO2) x ( 12.01078 g C/mol)n= 25.9 g C

(c)

Use the law of conservation of mass:

(2.16 mol TiO2) x ( 79.8660 g TiO2/mol) + (306 g CI2 + 25.9 g C = 504 g total.

Hope this help!:)

The element sulfur (S) is most likely to form covalent bonds with the element

helium (He).
magnesium (Mg).
zinc (Zn).
oxygen (O).

Answers

The element sulfur (S) is most likely to form covalent bonds with the element oxygen. Thus, the correct option for this question is D.

What do you mean by Covalent bonds?

Covalent bonds may be defined as a type of chemical bond that significantly involves the mutual sharing of electrons in order to form electron pairs between atoms. This pairing of electrons is simultaneously attracted by the two atomic nuclei.

Sulfur is categorized into the category of nonmetal in group 6A, and therefore it has 6 valence electrons. In order to obey the octet rule, it needs to gain 2 electrons. It can do this by forming 2 single covalent bonds.

The sulfur atom subsequently shares four valence electrons with two oxygen atoms as two covalent double bonds, and shares its remaining two electrons with two oxygen atoms, forming two covalent single bonds.

Therefore, the element sulfur (S) is most likely to form covalent bonds with the element oxygen. Thus, the correct option for this question is D.

To learn more about Covalent bonds, refer to the link:

https://brainly.com/question/3447218

#SPJ6

When a baseball bat hits a baseball, what happens to the energy?
completo ancur

Answers

Answer: the baseball bat transfor its energy in the ball.

Explanation: you hit it with one and find out and tell me what you think what happen.

What is the scientific name of hydrogen -2 and hydrogen -3.​

Answers

Answer:

Hydrogen 2 is called deuterium, Hydrogen 3 is called Tritium

Explanation:

Hydrogen is the only element whose isotopes have different names in common use today: the 2H (or hydrogen-2) isotope is deuterium and the 3H (or hydrogen-3) isotope is tritium.

A 32.4 L gas sample at STP is compressed to a volume of 28.4 L, and the temperature is increased to 352 K. What is the new pressure of the gas in atmospheres

Answers

Answer:

1.47 atm

Explanation:

Step 1: Given data

Initial volume (V₁): 32.4 LInitial pressure (P₁): 1 atm (standard pressure)Initial temperature (T₁): 273 K (standard temperature)Final volume (V₂): 28.4 LFinal pressure (P₂): ?Final temperature (T₂): 352 K

Step 2: Calculate the final pressure of the gas

We can calculate the final pressure of the gas using the combined gas law.

P₁ × V₁ / T₁ = P₂ × V₂ / T₂

P₂ = P₁ × V₁ × T₂ / T₁ × V₂

P₂ = 1 atm × 32.4 L × 352 K / 273 K × 28.4 L = 1.47 atm

the third period element with the largest number of electrons

Answers

Answer:

Na

Explanation:

How many moles of N2 is 25.92g of N2?

Answers

Explanation:

number of moles = mass /relative molecular mass

n = 25,92/mr(N2)

n=25,92/14×2

n=25,92/28

n=0.93moles

Each polysaccharide tested gives different color results with the iodine test ​

Answers

Iodine (iodine-potassium iodide) staining distinguishes starch ( a polysaccharide) from monosaccharides, a disaccharides and other polysaccharides. Therefore, a bluish black color is a positive test for starch, and a yellow-ish brown color ( no color change) is a negative test for starch.

Is snow organic or inorganic?

Answers

Answer:

snow is made up of a variety of mostly organic matter, including dead or dying animals and phytoplankton, protists, fecal matter, sand, and other inorganic dust.

Explanation:

I hope I helped!!

Plz mark me brainliest it would really make my day!

Answer:

I think its organic unless we are talking about this snow storm then no

The average adult heart pumps about 84./mLs of blood at 72 beats per minute. Suppose you need to calculate how long it would take the average heart to circulate 1700.mL of blood. Set the math up.

Answers

Answer:

1700 mL / 84 mLs

Explanation:

Given that:

Volume of blood pumped per minute = 84 /mLs

Time it takes to circulate 1700 mL of blood :

Time taken = Volume of blood circulate / Rate

Hence, to circulate 1700 mL of blood :

Time taken = 1700 mL / 84 mLs

Find the molecular mass of
MgSO4 7H₂O.​

Answers

Answer:

MgO +H2SO4

Explanation:

use photomath

You need to produce a buffer solution that has a pH of 4.97. You already have a solution that contains 10. mmol (millimoles) of acetic acid. How many millimoles of acetate (the conjugate base of acetic acid) will you need to add to this solution?

Answers

Answer:

16.9 mmoles are needed to add to the solution

Explanation:

To solve this, we can apply the Henderson Hasselbach equation:

Acetic acid → CH₃COOH

CH₃COOH  +  H₂O  ⇄  CH₃COO⁻   +  H₃O⁺             Ka

That is the acid base equilibrium, to determine the amount:

pKa of acetic acid is 4.74

Henderson Hasselbach formula is:

pH = pKa + log (base/acid)

We replace  →  4.97 = 4.74 + log (B / 10mmoles)

Let's verify mmoles of B

4.97 - 4.74 = log (B/10)

0.23 =  log (B/10)

10^(0.23) = 10^(log (B/10)

1.698 = B/10

B = 1.698 . 10 → 16.9 mmoles

HELPPPPPPPPPPPPPPPPPPPPPP PLZ



While cleaning my room, I use 5 Newtons of force to lift a board game from the floor to the shelf in my closet that's 2 meters high. How much work was done on the board game?


10 Joules



10 Watts



2.5 Watts



2.5 Joules

Answers

10 joules

hope that helps^^

Answer:

10 joules im not sure tho

An FCC iron-carbon alloy initially containing 0.20 wt% C is carburized at an elevated temperature and in an atmosphere wherein the surface carbon concentration is maintained at 1.0 wt%. If after 48 h the concentration of carbon is 0.35 wt% at a position 3.9 mm below the surface, determine the temperature at which the treatment was carried out. You will need to use data in the two tables below to solve this problem.

Answers

Answer:

Hello the table required is missing attached below is the missing table

Answer : 1299.05 k

Explanation:

Given data :

concentration of carbon ( Cx ) at a position 3.9mm below surface = 0.35

concentration of carbon ( Co ) = 0.20

surface carbon ( Cs ) = 1

Determine the temperature at which the treatment was carried out

first we will determine the value of Z in the table attached

given that the value of erf ( Z ) for Z = 0.8125 from the table

= [tex]\frac{Z- 0.9}{0.95-0.9} = \frac{0.8125-0.797}{0.8209-0.797}[/tex]

 make Z subject of the equation

Z = 0.932

next calculate the diffusion coefficient using the relation below

Z = [tex]\frac{x}{2\sqrt{Dt} }[/tex]   ----- ( 1 )  where ; z = 0.932 , x = 3.9 mm , t = 48h

0.932 =

x = 3.9 mm = 0.0039 m

t = 48 h = ( 48 *60* 60 ) = 172800 secs

Insert values into equation 2

0.932 = [tex]\frac{0.0039}{2\sqrt{D * 172800} }[/tex]  

[tex]\sqrt{D*172800}[/tex] = (0.0039 / 0.932 ) / 2

      172800 * D  =( 0.0021 )^2

therefore D = 2.55 * 10^-11 m^2/s

Finally calculate the temperature at which the treatment was carried out

D = [tex]Do exp(\frac{-Qd}{RT} )[/tex]  ----- ( 3 )

D = 2.55 * 10^-11 m^2/s ,

Do = 2.3*10^-5  m^2/s ( gotten from Diffusion data table )

Qd = 148000 J/mol ( gotten from Diffusion data table )

R = 8.31 J/mol k ( gotten from Diffusion data table )

back to equation 3

D / Do = exp ( -17810 / T )

1.11 * 10^-6 = exp ( -17810 / T )

therefore T =  -17810 / ln( 1.11 * 10^-6 )

                   = - 17810 / -13.71  =   1299.05 k

100
Continue reflecting on managing the effects of tropical cyclones by a
the phrases below:
I have learned that the Philippine Area of Responsibility
The Philippine Atmospheric, Geophysical, and Astronomical Services Administration
The Philippines is prone to typhoons because
You can trace the path of typhoons using
You will then understand that landmasses and bodies of
water affect the intensity of typhoons causing it to increase when
and decrease when
We should stay informed about the weather. Public Storm Warning Signals indicate
The higher the PSWS, the
the damage felt. Hazards that may
accompany tropical cyclones are
But tropical cyclones also have benefits, such as
Great work! Now that you know more about the effect of typhoons, you can
ssen the damages by knowing what to do. Answer the next activity, to eva
nowledge on precautionary measures to lessen the risk brought about by
10​

Answers

Answer:

?????

Explanation:

...? what...?

What is the molecular weight of magnesium chloride?​

Answers

Answer:

Magnesium chloride/Molar mass

95.211 g/mol

Explanation:

Other Questions
A scientist has been studying the amount of fresh water stored in polar ice caps for many years. He believes that one of the ice sheets in Antarctica is getting smaller. What kind of data should the scientist collect to determine if the ice sheet is changing size?AMeasure how deep the ice is for a few months.BMeasure how much area and how thick the ice is over several years.CMeasure the mass of the ice for a few weeks.DMeasure how wide the ice is from satellite images for a few days. plz help its a test What is this molecule anexample of?A. an atomB. a mixtureC. an elementD. a compound PLEASE HELP ASAP What is needed in order to give the DNA polymerase a place to start copying DNA? How long is it? What puts it on? how many inches are in a feet Introduction: In the greater Seattle-Tacoma area, an arms race continues between hospitals to gather the most modern technology available to use on their patients - currently this arms race's primary device of choice-robotic surgical systems. Why robotic surgical systems? These systems in theory allow surgeons to be more precise in performing complex surgical procedures on patients. With greater precision comes a greater chance of successfully healing the patient as well as reducing the patient's possibility for complications and recovery time. In addition to these benefits, hospitals through the use of superior technology can serve more patients and potentially reap greater benefits from insurance companies and patients for these advanced medical services The price of this superior care though comes at a cost to the patient increased charges) as well as purchase costs to the hospital. One of the most popular robotic systems is called da Vinci and is manufactured and sold by Intuitive Surgical (http://www.intuitivesurgical.com/). The da Vinci was FDA approved in July 2000 and can currently perform urologic, gynecologic, colorectal, head and neck, cardiothoracic, and other general surgery procedures. As important as the device is the surgeon that is trained in the use of the system. The more repetitions on the robotic system, the more skillful the surgeon becomes Depending on the options that a hospital chooses to purchase, the cost of a da Vinci system can range between 1 million and 3 million dollars with the associated sales taxes. As with all surgical instruments, there are also disposable items needed during a surgery associated with equipment-specifically the da Vinci which must also be purchased. These items range from $1,000 to $3,000. Finally, as with many pieces of sophisticated electronic technology. It must be $200.000 a year. In addition to these specific costs on that this equipment occupies as well as utilize all the must be m ined The maintenance costs can be upwards to addition to these specific cost hospitals must continue to maintain the surgical men occupies as well as utilize all other supplies that would be used in any utca The Deal: A local hospital in the Pupet Sound area faced a dilemma in the medical arms race. Surrounding hospitals were purchasing and willing the da Vinci robot system. Management began to worry about the erosion of patients that would seek out this modern technology over more traditional surgical procedures. To this end a strategic decision was made to acquire the da Vinci robotic surgical system. The following data was presented to an analyst in the Finance Department for review Table Lease Term: 36 Months Lease Payment: $68,742.10 Purchase Price: $1.900000.00 Quite often, analysts are provided leasing information by the leasing company. Hospitals may choose to purchase equipment outright or acquire equipment using a lease. Leases are generally considered operating or capital leases under current accounting rules. Hospitals may purchase equipment outright if they have sufficient capital money that can be used to purchase equipment of significant amount-usually greater than $5,000). Otherwise, they may decide that if the interest rate of payments being charged is lower than their internal cost of capital (debt financing, equity financing, etc.), they may utilize the lease directly from the equipment seller. Given the information provided in Table : 1. What is the annual rate of interest beine charped to the hospital? The total interest paid over the entire term of the lease? 2. Given this rate of interest. give some reasons on why or why not the hospital should accept this lease contract. Is this a good deal for the lessee? 3. Why would a hospital care whether it was a collease or an operating lease? When would one be an advantage over the other? please help me i have asked my all my friends and they dont know Find the slope. (10,-6) and (13,-7) Find the median of 19, 29, 36, 15, and 20. Show all the steps that you took to find your answer. You project revenue to start at $5,000 for the first month and grow by $200 each month thereafter. You project expenses to begin at $7,000 per month and grow by $50 per month. In what month will you break even (revenue equal to expenses)? you went to move a 41 kg bookcase to a different place in the living room. if you push with a force of 65 N and the bookcase accelerates at 0.12 m/s2 what is the coefficient of kinetic friction between the bookcase and the carpet? Which of the following pairs of ratios are equivalent? 1) 38 : 133 and 16 : 56 , 2) 15 : 20 and 28 : 56 Which of the following characteristics would not give animals an advantage in the ocean? A.Long body hair B.A smooth body C.Structures that sense movement D.A strong sense of smell In Science class, students are tracking the amount of rainfall. Sofar, it has rained 6 inches in 15 days. If this rate continues, howmuch rain will accumulate after 40 days? underline the verbs plzz . i will give you brainliest plzzz its urgent a two paragraph summary on how old is earth it's for science what is non time bound? Mrs. Jones is walking towards you. You are looking at her from a(an) -- viewO ProximalO AnteriorO DorsalO Posterior what number lies between 9.05 and 9.06 on the number line When doing push ups, which best describes your position?O DistalO ProneO StrongO Supine What is an example of an electronic sound generator?A. compact discB. synthesizerC. transmitterD. gramophone