Which one of the atoms shown would most likely form a cation with a charge of +1

Answer:

pH = 4.6  

Explanation:

pH is the negative of the log of the hydrogen ion concentration

- log { 2.52 x 10^-5)   = ~ 4.6

Answer: B and E are True

Explanation:

Because Fe has a higher oxidation potential than H2, H+ can oxidize it.

[tex]$\begin{array}{llllll}\mathrm{Fe} & \rightarrow & \mathrm{Fe}^{2+} & +2 \mathrm{e}- & \mathrm{E}^{0}=0.44 \mathrm{~V} \\ \mathrm{H} & \rightarrow & \mathrm{H}^{+} & + & \mathrm{e}^{-} & \mathrm{E}^{0}=0 \mathrm{~V}\end{array}$[/tex]

Ni can reduce Br2 because the reduction potential of Ni is more than Br2.

[tex]\mathrm{Ni}^{2+}+2 \mathrm{e}^{-} \rightarrow \mathrm{Ni}^{-} \quad \mathrm{E}^{0}=-0.25 \mathrm{~V}\\2 \mathrm{Br}^{-} \quad \rightarrow \mathrm{Br}_{2}+2 \mathrm{e}^{-} \quad \mathrm{E}^{0}=-1.087 \mathrm{~V}$[/tex]

Answer:

The Work Function is 4.74eV.

Explanation:

The photoelectric effect is a phenomenon in which a beam of light is projected towards a metal plate and this leads to the ejection of electrons from the metal. The minimum amount of energy required for this ejection of electrons is known as the work function. When the energy of the light beam is less than the work function, then the electrons are not emitted.

The photoelectric effect is represented by the equation:

E = φ + KE  where

E = energy of the incident photons

KE = kinetic energy of photoelectrons

φ = Work function of the metal

This can also be written in terms of frequency as:

h = h₀ + [tex]\frac{1}{2}[/tex] mv²

= frequency of the incident light beam

₀ = frequency of the photoelectrons

m = mass of the electron

v = velocity of the electron

h = Plank's constant 6.623 x 10⁻³⁴Js

Conversion factor: 1eV = 1.602 x 10⁻¹⁹ J

So, 1.05eV = 1.682 10⁻¹⁹ J

Using the formulas,

(6.623 x 10⁻³⁴Js)(1.40x10¹⁵ s⁻¹) = φ + 1.682 x 10⁻¹⁹ J

(9.272 x 10⁻¹⁹) - (1.682 x 10⁻¹⁹) = φ

φ = 7.590 x 10⁻¹⁹ J = 4.74 eV

Learn more about work function here:

https://brainly.com/question/9757301

#SPJ2

Quartz and Feldspar will be comparatively larger in size since they are formed from cooling of magma while Pyroxene and Olivine are formed by the cooling of lava.

Magma is molten rock that is found deep within the earth's crust whereas Lava is molten rocks that comes up and flows on the earth's surface.

Minerals formed from magma and lava have comparatively different sizes.

Minerals formed from magma are larger in size than minerals formed from Lava. This is because minerals formed from magma undergo slower cooling, and thus, have a longer time to grow in size. However, minerals formed from lava have a relatively shorter cooling time and do not grow into very large sizes.

Therefore, Quartz and Feldspar will be comparatively larger in size since they are formed from cooling of magma while Pyroxene and Olivine are formed by the cooling of lava.

Learn more about magma and lava at: https://brainly.com/question/14886424

#SPJ1

Answer:

B. An astronaut in a spaceship

Isolated system :-

In an isolated system, there is no transfer of energy or matter between the system and the environment.

Hope it helps!

Answer: a = 2 ; f = 5 ; b = 2 ; g = 2 ; c = 2 ; h = 2 ; d = 4 ; i = 5 ; e = 3 ; j = 7

Explanation: Some rules to follow while calculating sig figs is

1. If a number like 4500 is present, only two sig figs are counted, but none of the zeros are, but if 4500. has a decimal point present, then you should count all the numbers available.

2. If a number like .0005 is present, only count 5 as a sig fig, however if the number is .00050, count the 0 after the 5 in this example (this would then have two sig figs.

Answer:

8

Explanation:

im pretty sure it'll be 8 electrons

The reason for this is that water is a polar molecule and one water molecule is attracted to the other by a hydrogen bond.

The term entropy refers to the degree of disorder in a molecule. The more disorderly a molecule is, the higher its entropy.

The fact that water is a polar molecule and one water molecule is attracted to the other by a hydrogen bond thus, two water molecules represent more entropy than two hydrogen molecules plus an oxygen molecule.

Learn more about entropy:https://brainly.com/question/13146879

#SPJ1

Answer:

chuma ya ndoshi.............

Explanation:

.

kwenda ukalale .............

Answer:

6 moles

Explanation:

From the equation you can see that twice as many HCL moles are used as H2 produced

2 x 3 = 6 moles  of HCL required

Answer:

if the Florida inters into the land se hokar gar ke bill Tak jane ke process Florida kahte hai aur bur ka bal se doodh chusne Tak wo Florida s

Humidity, thermometer, and rainfall factors affect the shape of Florida, making the shape different.

In general, a molecule's electron pairs will take on a structure that maximizes theirs from one another.

Even charges repel one another, whereas dissimilar charges attract H₂O, for instance, containing two pairs of lone electrons but taking on an angular form.

Sand ridges, like the Lake Wales Ridge, were created during dry times from sediments that had been transported by ocean currents and deposited to form islands.

Latitude, land and water distribution, dominant winds, hurricanes, pressure systems, and ocean currents are the main variables that influence Florida's climate.

Therefore, as glaciers retreated throughout cooling cycles, sea levels dropped and Florida occasionally doubled in size.

Learn more about Florida, here:

https://brainly.com/question/12732190

#SPJ2

Answer: .75 M

Explanation:

The nucleus of the atom is the heaviest part of the atom.

When the ratio of neutrons to protons is too high, the nucleus becomes unstable and Beta emission has to take place.

Learn more about beta emission here:

https://brainly.com/question/4184205

#SPJ10

Assuming pressure is held constant,

[tex]\frac{8}{3}=\frac{V_{2}}{4}\\\\V_{2}=4\left(\frac{8}{3} \right) \approx \boxed{10.7 \text{ L}}[/tex]

The complete table is inserted.

A table is given,

Formulas used:

pH=  -log(H⁺)

pOH=  -log(OH⁻)

pH+ pOH=14

Calculations:

For A: (H⁺)=2×10⁻⁸M

Using the pH formula:

pH=  -log(H⁺)=-log(2×10⁻⁸)=7.69

pOH=14 - 7.69=6.3

Calculating OH concentration,

pOH=  -log(OH⁻)

6.3= -log(OH⁻)

(OH⁻)=5.011×10⁻⁷M

Hence, the nature of A is basic.

Similarily,

For B,

(OH⁻)=1×10⁻⁷

Using the pH formula:

pOH=  -log(OH⁻)= -log(1×10⁻⁷)=7

pH=14-7=7

Calculating H concentration,

pH=  -log(H⁺)

7= -log(H⁺)

(H⁺)=1×10⁻⁷M

Hence, the nature of B is neutral.

Similarily,

For C,

pH=12.3

Using the pH formula:

pOH=14-12.3=1.7

Calculating H concentration,

pH=  -log(H⁺)

12.3= -log(H⁺)

(H⁺)=5.011×10⁻¹³M

Calculating OH concentration,

pOH=  -log(OH⁻)

1.7= -log(OH⁻)

(OH⁻)=1.99×10⁻²M

Hence, the nature of C is Basic.

Similarily,

For D,

pOH=6.8

Using the pH formula:

pH=14-6.8=7.2

Calculating H concentration,

pH=  -log(H⁺)

7.2= -log(H⁺)

(H⁺)=6.309×10⁻⁸M

Calculating OH concentration,

pOH=  -log(OH⁻)

6.8= -log(OH⁻)

(OH⁻)=1.58×10⁻⁷M

Hence, the nature of D is basic.

Learn more about the acid and bases here:

https://brainly.com/question/16189013

#SPJ10

39.96 g product form when 16.7 g of calcium metal completely reacts.

Stoichiometry is a section of chemistry that involves using relationships between reactants and/or products in a chemical reaction to determine desired quantitative data.

Equation:

[tex]Ca(s) + Cl_2(g)[/tex] → [tex]CaCl_2(s)[/tex]

In this case, for the undergoing reaction, we can compute the grams of the formed calcium chloride by noticing the 1:1 molar ratio between calcium and it (stoichiometric coefficients) and using their molar mass of 40 g/mol and 111 g/mol by using the following stoichiometric process:

[tex]m_{ca_C_l_2}[/tex]= 16.7 g Ca x [tex]\frac{1 mol \;of \;Ca}{40g Ca}[/tex] x [tex]\frac{1 mol \;of \;CaCl_2}{1 mol \;Ca}[/tex] x [tex]\frac{111g of \;CaCl_2}{1 mol \;CaCl_2}[/tex]

[tex]m_{ca_C_l_2}[/tex] = 39.96 g

Hence, 39.96 g product form when 16.7 g of calcium metal completely reacts.

Learn more about the stoichiometric process here:

https://brainly.com/question/15047541

#SPJ1

easy to compare

easy in calculation

adjust to units commonly used in certain places

Answer:

The si unit used to measure weight is kilogram /kg

In conclusion, modeling is very useful for predicting molecular polarity because chemical bonds among different atoms are generated to equal electrical charges.

Molecular polarity refers to the unequal distribution of electrical charges in the atoms of a molecule.

This unequal distribution leads to the generation of molecular poles (positive and negative) at the ends of the chemical bonds.

In conclusion, modeling is very useful for predicting molecular polarity because chemical bonds among different atoms are generated to equal electrical charges.

Learn more about molecular poles here:

https://brainly.com/question/18649956

#SPJ1

Answer:

c, have no internal energy

Explanation:

I) carbon dioxide

ii) nitrogen dioxide

iii) nitric acid

iv) sulphric acid

v) Potassium dichromate

vi) hexacyanoferrate (III) ion( not sure)

For all three questions, we will use the fact that

1) For 175 mL of solution at 0.203 M, this means that:

Considering the hydrochloric acid solution, if we have 0.035523 mol, then:

2) If there is 20.3 mL = 0.0203 L, then:

This means that the molarity of the diluted solution is:

3) If we need 1.50 L of 0.700 M solution, then:

Considering the 9.36 M acid solution, from which we need 1.05 mol of perchloric acid from,

Answer:

Work is the use of force to move an object. It is directly related to both the force applied to the object and the distance the object moves. Work can be calculated with this equation: Work = Force x Distance.

:)

The ⁴⁰₁₈X is the symbol for ⁴⁰₁₈Ar - atom and it has 18 protons, 18 electrons, and 22 neutrons.

Mass number is the sum of the numbers of protons and neutrons present in the nucleus of an atom.

In the given element,  ⁴⁰₁₈X,  Subscript 18 is the number of proton and is also equal to the number of electron. While supercript 40 is the atomic mass.

The number of neutrons is given by subtracting the proton number from the mass number.

Therefore,

Number of Neutron = Mass Number - Atomic Number

                                 = 40 - 18

                                 = 22 Neutrons

Learn more about Mass number here ;

https://brainly.com/question/18803094

#SPJ1

Activation energy is required so reactants can move together, overcome forces of repulsion, and start breaking bonds.

The minimum amount of energy that is needed to activate atoms or molecules to a condition in which they can undergo a chemical transformation or physical transport.

The activation energy of this chemical reaction is high that it will not start at room temperature. This is why a source of heat is required to start the fire: the “energy barrier” must be overcome before the reaction can proceed further.

In any chemical reaction, existing chemical bonds should be broken before new bonds formation. The breaking of chemical bonds requires an input of energy. In some reactions, the thermal energy at room temperature is enough to break the bonds.

In other cases, the thermal energy at room temperature does NOT give enough energy to break the needed bonds (by facilitating sufficiently energetic molecular collisions) to get the reaction started.

Learn more about activation energy here:

https://brainly.com/question/11334504

#SPJ1

Answer:

1. Adding hydrogen gas, b. shift to the right
2. Adding a catalyst, c. No effect
3. Decreasing the pressure, a. shift to the left

Explanation:

Hydrogen gas can be rewritten as H2. Whenever you add something to an equilibrium expression, it will shift to whichever side does not have this. So, since the reactant side has 3 moles of H2, adding more H2 to the reaction will shift to the products side, since there is no H2 there.

Adding a catalyst has no effect on equilibrium reactions.

When decreasing the pressure, equilibrium will shift to the side with the greater number of moles of gas. In this case, there are 4 moles of gas on the left, and 2 on the right, so it would shift to the left.