In order to determine the objectives that you've accomplished, you should identify the steps required to test a hypothesis.
What is a scientific method?A scientific method refers to the various techniques and objectives that are adopted to observe, investigate, and study the natural world while giving explanations on the basis of the evidence, hypothesis, or factual information that are derived from a research work.
The steps of a scientific method.An effective and efficient way to accomplish your objectives during a research work include the following:
Make observations.Ask questions.Construct a hypothesis.Test the hypothesis with an investigation.Analyze the data.Explain the result.Communicate the result.In conclusion, you should identify the steps required to test a hypothesis in order to determine the objectives that you've accomplished.
Read more on scientific method here: brainly.com/question/17216882
Consider the following exothermic process at equilibrium:
CO(g)+H2O(g)⇌CO2(g)+H2(g)
Which of the following changes would increase the amount of H2(g) present in the equilibrium mixture?
Consider the following exothermic process at equilibrium:
Which of the following changes would increase the amount of present in the equilibrium mixture?
decrease the temperature
increase [CO2]
increase [CO]
increase the volume of the container in which the reaction occurs.
more than one of the above
(Answer is not increase [CO])
For the given exothermic process at equilibrium, an increase in the concentration of CO would increase the amount of H₂.
How is equilibrium affected by changes?When a perturbation is done on a system at equilibrium, it shifts its equilibrium position to counteract the perturbation.
Let's consider the following exothermic process at equilibrium.
CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g)
Which of the following changes would increase the amount of H₂(g) present in the equilibrium mixture?
decrease the temperature. NO. For an exothermic reaction, a decrease in the temperature will shift the equilibrium towards the reactants.increase [CO₂]. NO. This would shift the equilibrium towards the reactants.increase [CO]. YES. This would shift the equilibrium towards the products.increase the volume of the container in which the reaction occurs. NO. This wouldn't affect the equilibrium since the number of gaseous moles is the same on both sides.more than one of the above. NO.For the given exothermic process at equilibrium, an increase in the concentration of CO would increase the amount of H₂.
Learn more about equilibrium here: https://brainly.com/question/2943338
#SPJ1
Which is the best analogy of a wave?
A wave is like building a ramp.
A wave is like shaking a hand.
A wave is like water rippling in a pond.
A wave is like knocking down a building.
The best analogy that can be use to describe a wave is that a wave is like a rippling in a pond.
What is a wave?A wave is a disturbance or vibrations that occur in a particle and travel from one medium to another medium thereby transporting energy form the origin of it to another location where is is utilized.
Therefore, The best analogy of a wave is a wave is like water rippling in a pond.
Learn more about wave below.
https://brainly.com/question/15663649
#SPJ5
How many grams of Mg(NO3), are necessary to
make 1500 mL of a 0.50 M solution?
Answer:
1.1 × 10² g
Explanation:
Step 1: Given data
Concentration of the solution (C): 0.50 M (0.50 mol/L)Volume of solution (V): 1500 mL (1.500 L)Step 2: Calculate the moles of Mg(NO₃)₂ (solute)
Molarity is equal to the moles of solute (n) divided by the liters of solution.
C = n/V
n = C × V
n = 0.50 mol/L × 1.500 L = 0.75 mol
Step 3: Calculate the mass corresponding to 0.75 moles of Mg(NO₃)₂
The molar mass of Mg(NO₃)₂ is 148.3 g/mol.
0.75 mol × 148.3 g/mol = 1.1 × 10² g
C. 2.86 g
D. 1.22 g
13. At what Kelvin temperature will 25.2 mol of Xe occupy a volume of 645 L at a pressure of 732 torr?
A. 361 K
B. 291 K
C. 402 K
D. 300 K
When magma goes down into the lower part of the mantie where it is recycled and may come right back up the ocean ridge is called..
2Fe(s) +3H2SO4(aq) →Fe2(SO4)3(aq) +3H2(g)When 10.3 g of iron are reacted with 14.8 moles of sulfuric acid, what is the percent yield if 5.40 g of "hydrogen gas" are collected?
Answer:
1040%
Explanation:
To solve this question we must convert the mass of Iron to moles in order to find limiting reactant. With limiting reactant we can find the theoretical moles of hydrogen and theoretical mass:
Percent yield = Actual yield (5.40g) / Theoretical yield * 100
Moles Fe -Molar mass: 55.845g/mol-:
10.3g * (1mol / 55.845g) = 0.184 moles of Fe will react.
For a complete reaction of these moles there are necessaries:
0.184 moles Fe* ( 3 mol H2SO4 / 2 mol Fe) = 0.277 moles H2SO4.
As there are 14.8 moles of the acid, Fe is limiting reasctant.
The moles of H2 produced are:
0.184 moles Fe* ( 3 mol H2 / 2 mol Fe) = 0.277 moles H2
The mass is:
0.277 moles H2 * (2.016g/mol) = 0.558g H2
Percent yield is:
5.40g / 0.558g * 100 = 1040%
It is possible the experiment wasn't performed correctly
Arrange in terms of increasing atomic radius. From smallest to largest.
S, F, Sr, Na, Ga
Answer:
F<S<Na<Ga<Sr
Explanation:
Atomic radius increased from the right of the periodic table to left, and from the top to the down
which is an example of a sale laboratory procedure
gloves worn when working with liquid oxygen must be able to resist.
Answer:
What is your question?
Explanation:
Can you give more context to ur question?
arrange the following in order of ionization energy, Na, Na+, C, O
Answer:
Na+, O, C, Na
(Na+ has more ionization energy and Na has less ionization energy)
please help does anyone know this// science!
Answer:
its A
Explanation:
The only one that makes sense
If an ultraviolet photon has a wavelength of 77.8 nm calculate the energy of one mole ultraviolet photon.
Answer:
Explanation:
E = (hc)/(λ)
E = (6.624x10^(-27))Js x ((3×10^8)ms^(-1)) /
(77.8x10^(-9)m)
E = 2.55 x 10^(-11) J
How many milliliters of 0.2560 M KCl solution will contain 20.00 g of KCl?
Answer is 1048 mL solution but how do I get to the answer?
Answer:
1048 mL
Explanation:
Step 1: Given data
Concentration of the solution: 0.2560 MMass of KCl (solute): 20.00 gStep 2: Calculate the moles corresponding to 20.00 g of KCl
The molar mass of KCl is 74.55 g/mol.
20.00 g × 1 mol/74.55 g = 0.2683 mol
Step 3: Calculate the volume of the solution
Molarity is equal to moles of solute divided by liters of solution.
M = moles of solute / volume of solution
volume of solution = moles of solute / M
volume of solution = 0.2683 mol / (0.2560 mol/L)
volume of solution = 1.048 L = 1048 mL
Please help it’s for 100 points
Has your cell phone ever not had enough battery when you really needed it? What did you do?
Answer:
Yes
Explanation:
There are some times when I will need my cell phones but it will have not battery. At this point, I look for a means to charge it or I could probably use power bank to charge. I always have an extra battery, so when the other battery is flat, I will replace it with the second charged one. But when both batteries are flat, I will look for a means to charge it using generator or wait till I have access to power supply.
Human blood contains a buffer of carbonic acid (H_2 CO_3) and bicarbonate anion (HC〖O_3〗^-) in order to maintain blood pH between 7.35 and 7.45, as a value higher than 7.8 or lower than 6.8 can lead to death. In this buffer, hydronium and bicarbonate anion are in equilibrium with carbonic acid. Furthermore, the carbonic acid in the first equilibrium can decompose into CO_2 gas and water, resulting in a second equilibrium system between carbonic acid and water. Because CO_2 is an important component of the blood buffer, its regulation in the body, as well as that of O_2 , is extremely important. The effect of this can be important when the human body is subjected to strenuous condition.
Carbonic acid buffer:
H_2 CO_3 (aq)+ H_2 O(l) ↔H_3 O^+ (aq)+HC〖O_3〗^- (aq)
1. Write the equilibrium constant expression K_c for the carbonic acid buffer in the blood.
Kc = [H3O+][HCO3-] / [H2CO3]
Remember that Kc is products over reactants. Also, you do not include liquid water in a Kc expression, since liquid water has no concentration.
How many moles of solute are present in 2 L of a 25M potassium nitrate (KNO3) solution?
0.5 moles
50 moles
25 moles
2 moles
50 moles
The formula used in this question is-
Mole= Molarity*Volume(in Litre)
So after putting the value
= (25)*(2)
=50 moles
What is molarity?
Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per liters of a solution. Molarity is also known as the molar concentration of a solution.
Learn more about Molarity here
https://brainly.com/question/14469428
#SPJ2
Why is it hard to predict the weather more than a few days in advance?
Answer:
Because the weather is complex and dynamic.
Explanation:
The gas phase decomposition of nitrogen dioxide at 383 °C
NO2(g)NO(g) + ½ O2(g)
is second order in NO2 with a rate constant of 0.540 M-1 s-1.
If the initial concentration of NO2 is 0.477 M, the concentration of NO2 will be
M after 12.4 seconds have passed.
Answer:
[tex][NO_2]=0.112M[/tex]
Explanation:
Hello there!
In this case, since the second-order integrated law is given by the following equation:
[tex]\frac{1}{[NO_2]} =\frac{1}{[NO_2]_0}+kt[/tex]
Thus, given the initial concentration of the nitrogen dioxide gas, the rate constant and the elapsed time, we obtain:
[tex]\frac{1}{[NO_2]}= \frac{1}{0.477M} +0.54M^{-1}s^{-1}\\\\\frac{1}{[NO_2]}=8.933M^{-1}[/tex]
[tex][NO_2]=\frac{1}{8.933M^{-1}} =0.112M[/tex]
Best regards!
pls help i will mark as brainliest
Answer:
ano po ito?? isa po ba itong story
1. Which of these is not a macromolecule? a) Alab) protein c) polysaccharide d) nucleic
acid
Answer:
a) alab
Explanation:
Two of the main macromolecules are proteins and nucleic acid, and a polysaccharide is multiple monomers (monosaccharide) that join to create another macromolecule called carbohydrates.
What are types of Kinetic energy?
Answer:
Machical Engery
Electrical Engery
Rhermal Engery
Sound Energy
Explanation:
Explanation:
There are five types of kinetic energy:
RadiantThermalSoundElectrical and Mechanical.Thus, There are five types of kinetic energy
-TheUnknownScientist
Plz I need helpppppp
How are a tundra and a desert different?
A desert has a low level of precipitation and a tundra has a high level of precipitation.
A desert is wet year-round and a tundra is dry.
A tundra has a lower levels of humidity.
A tundra has lower average temperatures year-round.
i am giving brainlyest!!!!!!!
Answer:
A tundra has a lower average temperatures year-round.
provide the electronic structure diagram of propene showing all molecular orbitals
Answer:
Explanation:The pi-molecular orbitals in propene (CH3-CH=CH2) are essentially the ... This central carbon thus provides two p-orbitals – one for each pi bond – and these two different p-orbitals have to be perpendicular, leading to a twisted structure as shown: ... It all comes down to where the location of the electron-deficient carbon
The pH of an acidic solution is 5.59. What is [H+]?
Answer:
[H⁺] = 2.57x10⁻⁶ M
Explanation:
This problem can be solved using the definition of pH:
pH = -log[H⁺]
Now we isolate [H⁺] in the equation:
-pH = log[H⁺]
[tex]10^{-pH}[/tex]=[H⁺]
As we are given the pH by the problem, we can now proceed to calculate the [H⁺]:
[H⁺] = [tex]10^{-5.59}[/tex]
[H⁺] = 2.57x10⁻⁶ M
Thus, when the pH of a solution is 5,59; the molar concentration of H⁺ species is 2.57x10⁻⁶.
Observe the map what do the grey scar like represent?
Answer:
mid ocean ridge
Explanation:
A sample of hydrogen has an initial temperature of 122.0 °F. When the temperature is lowered to -23.0 °F, the volume of hydrogen becomes 212 cm3. What was the initial volume of the hydrogen?
Answer: The initial volume of gas was [tex]282cm^3[/tex]
Explanation:
Charles's Law: This law states that volume is directly proportional to temperature of the gas at constant pressure and number of moles.
[tex]V\propto T[/tex] (At constant pressure and number of moles)
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]
where,
[tex]V_1[/tex] = initial volume of gas =?
[tex]V_2[/tex] = final volume of gas = [tex]212cm^3[/tex]
[tex]T_1[/tex] = initial temperature of gas = [tex]122.0^0F=323.15K[/tex]
[tex](32^0C=273.15K)[/tex]
[tex]T_2[/tex] = final temperature of gas = [tex]-23.0^0F=242.59K[/tex]
[tex]\frac{V_1}{323.15}=\frac{212}{242.59}[/tex]
[tex]V_2=282cm^3[/tex]
Therefore, the initial volume of gas was [tex]282cm^3[/tex]
what are the advantages and disadvantages of rusting
Answer: The rusting of iron is more of a disadvantage than an advantage. Rusting forms an iron oxide which is more brittle than the iron. It less resistance to environmental degradation and permeability by water and air, therefore cannot be used for coating.
Explanation: plzz mark as brainliest
1
Select the correct answer.
How long is the term of a federal judge in a constitutional court?
OA.
two years
OB
four years
Ос.
six years
OD.
lifetime
Answer:
Judges and justices serve no fixed term — they serve until their death, retirement, or conviction by the Senate. By design, this insulates them from the temporary passions of the public, and allows them to apply the law with only justice in mind, and not electoral or political concerns.
The concentration of H3AsO3 in a solution is determined by titrating it with a 0.1741 M Ce4+ solution. The balanced net ionic equation for the reaction is: 2Ce4+(aq) + H3AsO3(aq) + 5H2O(l) 2Ce3+(aq) + H3AsO4(aq) + 2H3O+(aq) In one experiment, 18.68 mL of the 0.1741-M Ce4+ solution is required to react completely with 30.00 mL of the H3AsO3 solution.
Calculate the concentration of the H3AsO3 solution.
Answer:
0.0542 M
Explanation:
Let;
CA = concentration of Ce4+ solution = 0.1741 M
VA = volume of Ce4+ solution = 18.68 mL
CB = concentration of H3AsO3 = ?
VB = volume of H3AsO3 = 30.00 mL
NA = Number of moles of Ce4+ solution = 2
NB = Number of moles of H3AsO3 = 1
From;
CAVA/CBVB = NA/NB
CAVANB = CBVBNA
CB = CAVANB/VBNA
CB = 0.1741 * 18.68 * 1/30.00 * 2
CB = 0.0542 M
