Answer:
D) Evaluating it with experimentation and argument.
Explanation:
If you don't have enough observational evidence, then you can't really strengthen your scientific knowledge, because you haven't collected enough information to answer the questions you're asking.
If you only have a few scientists working on a question, it will take longer to find an answer. With more people working on a concept, it can be solved in more time.
It can be good to create new hypotheses, but only if you've already tested your original hypothesis (with experimentation and argument), and it turned out to be wrong. Once you've rejected your first hypothesis, only then should you make a new one.
Answer:
D
Explanation:
The osmotic pressure exerted by a solution is equal to the molarity multiplied by the absolute temperature and the gas constant . Suppose the osmotic pressure of a certain solution is measured to be at an absolute temperature o of 312. K. Write an equation that will let you calculate the molarity c of this solution.
Answer:
Explanation:
From the question, osmotic pressure exerted by a solution is equal to the MOLARITY multiplied by the absolute TEMPERATURE and the GAS CONSTANT r.
Let P = osmotic pressure,
C = molarity, then
T = absolute temperature
r=gas constant
The Osmotic pressure Equation exerted by a solution [tex]P=C*T*r[/tex]
[tex]P=CTr[/tex]
Then it was required in the question to write an equation that will let you calculate the molarity c of this solution, and this equation should contain ONLY symbols
C= molarity of the solution
P=osmotic pressure
r = gas constant
T= absolute temperature
[tex]C=P/(rT)[/tex]
The equation that will let us calculate the molarity c of this solution = [tex]C=P/(rT)[/tex]
why are the products of light reaction of photosythesis important
Answer: light reaction produces oxygen and water as we know the general importance of oxygen and water they are useful for organism to survive if plants do not produce oxygen then how could we get oxygen from the environment
An unknown compound, B, has the molecular formula C7H12. On catalytic hydrogenation 1 mol of B absorbs 2 mol of hydrogen and yields 2-methylhexane. B has significant IR absorption band at about 3300 and 2200 cm-1. Which compound best represents B?
Answer:
5-methylhex-1-yne//5-methylhex-2-yne//2-methylhex-3-yne
Explanation:
We have to start with the information on the IR spectrum. The signal at 3300 is due to a C-H bend sp carbon and the signal in 2200 is due to the stretch carbon-carbon. Therefore we will have an alkyne. Now if we have 2-methylhexane as the product of hydrogenation we have several options to put the triple bond. Between carbons 1 and 2 (5-methylhex-1-yne), between carbons 2 and 3 (5-methylhex-2-yne) and between carbons 3 and 4 (2-methylhex-3-yne). On carbon 5 we have a tertiary carbon therefore we dont have any other options.
See figure 1
I hope it helps!
An EpiPen, used to treat anaphalactic allergic reactions, contains 0.30 mg of epinephrine. The concentration of epinephrine in each syringe is 1.0 mg/mL. What is the volume, in milliliters (mL), of solution in each syringe
Answer:
0.3mL
Explanation:
Mass = 0.30mg
Concentration = 1.0 mg/mL
Volume = x
The relationship between the three parameters is given as;
Concentration = Mass / Volume
Making Volume our subject of interest we have;
Volume = Mass / Concentration
Substituting the values we have;
Volume = 0.30 mg / 1 mg/mL = 0.3mL
The boiling of water is a:_______.
a. chemical change because a gas (steam) is given off.
b. chemical change because heat is needed for the process to occur.
c. physical change because the water merely disappears chemical and physical damage.
d. physical change because the gaseous water is chemically the same as the liquid.
Answer:
D
Explanation:
trust me its correct i think
The type of nuclear decay an unstable nucleus will undergo depends on its ratio of neutrons to protons. The radioisotope cobalt-65 has a ratio of neutrons to protons of 1.41, which is too high for a nucleus of this size. What nuclear changes could reduce this ratio
Answer:
Explanation:
In cobalt - 65 ,
no of protons is 27 ( p )
no of neutron = 65 - 27 ( n )
= 38
n / p ratio
= 38 / 27
= 1.41
If case of emission of alpha particle
no of proton p = 27 - 2 = 25
no of neutrons = 38 - 2 = 36
n / p ratio = 36 / 25
= 1.44
So it increases
In case of emission of beta particle
No of neutron n = 38 - 1 = 37
No of proton = 27 + 1 = 28
n / p ratio = 37 / 28
= 1.32
Hence ratio decreases.
Hence beta ray decay will result in decrease in n / p ratio.
Select the correct answer. What is heat of vaporization?
A. It is the heat required to change a substances temperature by 1C
B. It is the heat required to change a gram of substance from a solid to a liquid
C. It is the heat required to change a substance from a solid directly to a gas
D. It is the heat required to change a gram of substance from a liquid to a gas
E. It is the heat required to separate one substance into two substances
Answer:
D) it is the heat required to change a gram of substance from a liquid to a gas
Explanation:
idk i think its correct but if its wrong just let me know
A 11.0 mLmL sample of 0.30 MHBrMHBr solution is titrated with 0.16 MNaOHMNaOH. Part A What volume of NaOHNaOH is required to reach the equivalence point? Express the volume to two significant figures and include the appropriate units. nothingnothing
Answer:
21 mL of NaOH is required.
Explanation:
Balanced reaction: [tex]HBr+NaOH\rightarrow NaBr+H_{2}O[/tex]
Number of moles of HBr in 11.0 mL of 0.30 M HBr solution
= [tex](\frac{0.30}{1000}\times 11.0)[/tex] moles = 0.0033 moles
Let's say V mL of 0.16 M NaOH solution is required to reach equivalence point.
So, number of moles of NaOH in V mL of 0.16 M NaOH solution
= [tex](\frac{0.16}{1000}\times V)[/tex] moles = 0.00016V moles
According to balanced equation-
1 mol of HBr is neutralized by 1 mol of NaOH
So, 0.0033 moles of HBr are neutralized by 0.0033 moles of NaOH
Hence, [tex]0.00016V=0.0033[/tex]
[tex]\Rightarrow V=\frac{0.0033}{0.00016}=21[/tex]
So, 21 mL of NaOH is required.
Liquid hexane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 4.3 g of hexane is mixed with 7.14 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
We can produce 6.20 grams of CO2
Explanation:
Step 1: Data given
Mass of hexane = 4.3 grams
Molar mass of hexane = 86.18 g/mol
Mass of oxygen = 7.14 grams
Molar mass of oxygen = 32.0 g/mol
Step 2: The balanced equation
2C6H14 + 19O2 → 12CO2 + 14H2O
Step 3: Calculate moles
Moles = mass / molar mass
Moles hexane = 4.3 grams / 86.18 g/mol
Moles hexane = 0.0499 moles
Moles oxygen = 7.14 grams / 32.0 g/mol
Moles oxygen = 0.2231 moles
Step 4: Calculate the limiting reactant
For 2 moles hexane we need 19 moles O2 to produce 12 moles CO2 and 14 moles H2O
Oxygen is the limiting reactant. It will completely be consumed ( 0.2231 moles). Hexane is in excess. There will react 2/19 * 0.2231 = 0.02348 moles
There will be porduced 12/19 * 0.2231 = 0.1409 moles CO2
Step 5: Calculate mass CO2
Mass CO2 = moles CO2 * molar mass CO2
Mass CO2 = 0.1409 moles * 44.01 g/mol
Mass CO2 = 6.20 grams
We can produce 6.20 grams of CO2
Consider a cobalt-silver voltaic cell that is constructed such that one half-cell consists of the cobalt, Co, electrode immersed in a Co(NO3)3 solution, and the other half-cell consists of the silver, Ag, electrode immersed in a AgNO3 solution. The two electrodes are connected by a copper wire. The Co electrode acts as the anode, and the Ag electrode acts as the cathode. To maintain electric neutrality, you add a KNO3 salt bridge separating the two half-cells. Use this information to solve Parts B, C, and D.
A. The half-cell is a chamber in the voltaic cell where one half-cell is the site of the oxidation reaction and the other half-cell is the site of the reduction reaction.
Type the half-cell reaction that takes place at the anode for the cobalt-silver voltaic cell. Indicate the physical states using the abbreviation (s), (l), or (g) for solid, liquid, or gas, respectively. Use (aq) for an aqueous solution. Do not forget to add electrons in your reaction.
B. The half-cell is a chamber in the voltaic cell where one half-cell is the site of an oxidation reaction and the other half-cell is the site of a reduction reaction.
Type the half-cell reaction that takes place at the cathode for the cobalt-silver voltaic cell. Indicate physical states using the abbreviation (s), (l), or (g) for solid, liquid, or gas, respectively. Use (aq) for an aqueous solution. Do not forget to add electrons in your reaction.
Answer:
Anode half reaction;
Co(s) ----> Co^2+(aq) + 2e
Cathode half reaction;
2Ag^+(aq) + 2e-------> 2Ag(s)
Explanation:
A voltaic cell is an electrochemical cell that spontaneously produces electrical energy from chemical reactions. A voltaic cell comprises of an anode (where oxidation occurs) and a cathode (where reduction occurs). The both electrodes are connected with a wire . A salt bridge ensures charge neutrality in the anode and cathode compartments. Electrons flow from anode to cathode.
For the cell referred to in the question;
Anode half reaction;
Co(s) ----> Co^2+(aq) + 2e
Cathode half reaction;
2Ag^+(aq) + 2e-------> 2Ag(s)
Question 8
1 pts
A closed flask contains a 0.25 moles of O2 which exerts a pressure of
0.50 atm. If 0.75 moles of CO, is added to the container what is the
total pressure in the flask?
Answer:
\large \boxed{\text{2.0 atm}}
Explanation:
We can use Dalton's Law of Partial Pressures:
Each gas in a mixture of gases exerts its pressure separately from the other gases.
0.25 mol of O₂ exerts 0.50 atm.
If you add 0.75 mol of CO, the total amount of gas is
0.25 mol + 0.75 mol = 1.00 mol
[tex]p_{\text{total}} = \text{1.00 mol} \times \dfrac{\text{0.50 atm}}{\text{0.25 mol}}= \textbf{2.0 atm}\\\\\text{The total pressure in the flask is $\large \boxed{\textbf{2.0 atm}}$}[/tex]
The pressure of the closed flask after the addition of 0.75 moles of CO has been 2 atm.
Partial pressure can be defined as the pressure exerted by each gas in a given solution.
The total moles of gas in the container by the addition of CO has been:
Total moles = moles of oxygen + moles of CO
Total moles = 0.25 + 0.75
Total moles = 1 mol.
By using Dalton's law of partial pressure:
Total pressure = total moles [tex]\rm \times\;\dfrac{pressure\;of\;oxygen}{moles\;of\;oxygen}[/tex]
Total pressure = 1 [tex]\rm \times\;\dfrac{0.50}{0.25}[/tex]
Total pressure = 2 atm.
The pressure of the closed flask after the addition of 0.75 moles of CO has been 2 atm.
For more information about partial pressure, refer to the link:
https://brainly.com/question/14281129
Pyruvate is the end product of glycolysis. Its further metabolism depends on the organism and on the presence or absence of oxygen. Draw the structure of the product from each reaction as it would exist at pH 7. Include the appropriate hydrogen atoms. Reaction A: aerobic conditions in humans or yeast
The given question is incomplete. The image present in the question for Reaction A is attached below along with the answer.
Explanation:
Pyruvate molecule reacts with Coenzyme A in the presence of oxygen and it results in the formation of acetyl Coenzyme A and carbon dioxide.
The enzyme pyruvae dehydrogenase helps in catalyzing this reaction. As in this biochemical reaction [tex]NAD^{+}[/tex] gets converted into NADH.
This reaction is shown in the image attached below.
A chemistry student weighs out of an unknown solid compound and adds it to of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.
Required:
a. Using the information above, can you calculate the solubility of X?
b. If so, calculate it. Remember to use the correct significant digits and units. .
Complete Question
A chemistry student weighs out 0.950 kg of an unknown solid compound and adds it to 2.00 L of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.
Required:
a. Using the information above, can you calculate the solubility of X?
b. If so, calculate it. Remember to use the correct significant digits and units. .
Answer:
a
Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate 1 unit volume of the solvent solution at that given temperature.
And from our question we see that substance X saturated the solvent and there is still remained undissolved substance X
b
The solubility of X is [tex]S = 190 g /L[/tex]
Explanation:
From the question we are told that
The initial mass of the unknown solid is [tex]m_i =0. 950 \ kg[/tex]
The mass of the undissolved substance is [tex]m_u = 0.570 \ kg[/tex]
The volume of the solution is [tex]V =2.00\ L[/tex]
Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate 1 unit volume of the solvent solution at that given temperature.
And from our question we see that substance X saturated the solvent and there is still remained undissolved substance X
The mass of the substance that dissolved ([tex]m_d[/tex] ) is mathematically represented as
[tex]m_d = m_i - m_u[/tex]
[tex]m_d = 0.95 - 0.570[/tex]
[tex]m_d = 0.38 \ kg = 0.38 *1000 = 380 g[/tex]
The solubility of this substance (X) is mathematically represented as
[tex]S = \frac{m_d}{V}[/tex]
substituting values
[tex]S = \frac{ 380}{2}[/tex]
[tex]S = 190 g /L[/tex]
Based on VSEPR theory and your observations from the Molecular Geometry lab consider the following questions What is the predicted hybridization at an atom which is surrounded by a double bond and two single bonds?
a) Sp
b) sp^2
c) sp^3
Answer:
b) sp^2
Explanation:
Hybridization refers to the concept that atomic orbitals fuse to form newly hybridized orbitals, which in turn, influences molecular geometry and bonding properties. In chemistry, orbital hybridisation (or hybridization) is the implies the mixing of atomic orbitals to form hybrid orbitals (with different energies, shapes, etc., different from that of the component atomic orbitals) suitable for the pairing of electrons to form chemical bonds according to the principles of the valence bond theory.
In 1931 Linus Pauling proposed the idea of “mixing” the orbitals or “hybridizing” them to account for certain observed bonding patterns. Pauling proposed a sort of a combination of the orbitals giving you an orbital that has partial characters.
Hybridization is merely a mathematical construct. It is never an actual “process” that occurs within orbitals . Hybridization is a mathematical model that describes how the atomic orbitals would’ve looked like based on the observable molecular orbitals.
sp2 hybridization leads to the formation of a double bond. sigma bonds may also be formed depending on the valency of the central atom. In alkenes, an sp2 hybridized carbon atom forms a double bond in addition to two sigma bonds to other atoms.
The predicted hybridization is:
b) [tex]sp^2[/tex]
What does Hybridization tell us?It is the integration of atomic orbitals to shape new orbitals with exclusive energies and shapes than the unique orbitals.
Given: An atom that's surrounded with the aid of using a double bond and unmarried bonds.
[tex]sp^2[/tex] hybridization ends in the formation of a double bond. sigma bonds can also be shaped relying at the valency alkenes, an [tex]sp^2[/tex]sigma bonds to different atoms.
Thus, correct option is b.
Find more information about Hybridization here:
brainly.com/question/26079947
A sample of helium has a volume of 325 mL and a pressure of 655 mmHg. What will be the pressure, in mmHg, if the sample of helium is compressed to 125 mL (T, n constant)? (Show calculations.)
Answer:
1703 mmHg
Explanation:
Volume and pressure are presumed to be inversely proportional. Hence a change in volume by a factor of 125/325 = 5/13 is expected to change the pressure by a factor of 13/5:
(13/5)(655 mmHg) = 1703 mmHg
What is the predicted order of first ionization energies from highest to lowest for lithium (Li), sodium (Na), potassium (K), and rubidium (Rb)?
Rb > K > Na > Li
K > Rb > Na > Li
Li > Na > K > Rb
Rb > K > Li > Na
Answer:
Li>Na>K>Rb
Explanation:
Answer:
c. Li > Na > K > Rb
Explanation:
edge 2021
(:
The solubility of N2 in water at a particular temperature and at a N2 pressure of 1 atm is 6.8 × 10–4 mol L–1. Calculate the concentration of dissolved N2 in water under normal atmospheric conditions where the partial pressure of N2 is 0.78 atm.
Answer:
The correct answer is 5.30 * 10^-4 mol per L.
Explanation:
Based on Henry's law, in a solution solubility of the gas is directly proportional to the pressure, that is, C is directly proportional to P. Here P is the pressure and C is the concentration of the dissolved gases.
Therefore, it can be written as,
C2/C1 = P2/P1
Here, C1 is 6.8 * 10^-4 mol/L, P1 is 1 atm and P2 is 0.78 atm, then the value of C2 obtained by putting the values in the equation,
C2/(6.8*10^-4) = 0.78/1
C2 = 0.78 * 6.8*10^-4
C2 = 5.30 * 10^-4 mol per L.
Hence, the concentration of dissolved nitrogen at 0.78 atm is 5.30*10^-4 mol/L.
The solubility of cadmium oxalate, , in 0.150 M ammonia is mol/L. What is the oxalate ion concentration in the saturated solution? If the solubility product constant for cadmium oxalate is , what must be the cadmium ion concentration in the solution? Now, calculate the formation constant for the complex ion
Answer:
[Cd²⁺] = 2.459x10⁻⁶M
Kf = 9.96x10⁶
Explanation:
Solubility of CdC₂O₄ is 6.1x10⁻³M and ksp is 1.5x10⁻⁸
The ksp of CdC₂O₄ is:
CdC₂O₄(s) ⇄ Cd²⁺(aq) + C₂O₄²⁻(aq)
ksp = [Cd²⁺] [C₂O₄²⁻] = 1.5x10⁻⁸
As solubility is 6.1x10⁻³M, concentration of C₂O₄²⁻ ions is 6.1x10⁻³M. Replacing:
[Cd²⁺] = 1.5x10⁻⁸ / [6.1x10⁻³M]
[Cd²⁺] = 2.459x10⁻⁶MAll Cd²⁺ in solution is 6.1x10⁻³M and exist as Cd²⁺ and as Cd(NH₃)₄²⁺. That means concentration of Cd(NH₃)₄²⁺ is:
[Cd(NH₃)₄²⁺] + [Cd²⁺] = 6.1x10⁻³M
[Cd(NH₃)₄²⁺] = 6.1x10⁻³M - 2.459x10⁻⁶M = 6.098x10⁻³M
[Cd(NH₃)₄²⁺] = 6.098x10⁻³MIn the same way, the whole concentration of NH₃ in solution is 0.150M, as you have 4ₓ6.098x10⁻³M = 0.024M of NH₃ producing the complex, the concentration of the free NH₃ is:
[0.150M] = [NH₃] + 0.024M
0.1256M = [NH₃]The equilibrium of the complex formation is:
Cd²⁺ + 4 NH₃ → Cd(NH₃)₄²⁺
The kf, formation constant, is defined as:
Kf = [Cd(NH₃)₄²⁺] / [Cd²⁺] [NH₃]⁴
Replacing:
Kf = [6.098x10⁻³M] / [2.459x10⁻⁶M] [0.1256M]⁴
Kf = 9.96x10⁶2. In a paper chromatography analysis, three pigments, A, B, and C, were dissolved in a polar solvent. A is slightly polar, B is highly polar, and C is moderately polar. List in order how these will appear on the surface of the chromatography
A teacher has asked some groups of students to investigate the relationship between the organ systems of the human body. One group of students made the argument that many of the systems are related to each other. How can the illustration be used to support this argument?
Choose the correct answer.
The nervous system produces signals that control all of the body’s muscle movements.
The skeletal system provides the physical support for the respiratory system.
The digestive system breaks down food into nutrients that are transported by the circulatory system.
The endocrine system sends hormones to target organs in response to signals from the reproductive system.
Answer: The digestive system breaks down food into nutrients that are transported by the circulatory system.
Explanation:
An organ system includes the organs which are linked to one another to perform a physiological function in the body of the organism. The digestion is a complex process in which the food is being broken down into sub-components so that it can be assimilated in the body. The digestive system involves the multiple organs like mouth, esophagus, stomach, intestines and others. The food being digested is absorbed in the bloodstream, which circulate in the vital organs of the body like lungs, heart, vascular system hence, the blood becomes the part of the circulatory system.
Thus it can be said that the argument of children that the two systems are related is justified by the digestive and circulatory system of the body.
Gold can be separated from sand by panning or by a sluice-box. In panning, water is mixed with the sand and the resulting slurry is swirled in a shallow, saucer-shaped metal pan. In the sluice-box technique, running water is passed over an agitated sand- gold mixture. What physical property and what technique make this separation possible?
Answer:
Decantation by means of difference in relative densities.
Explanation:
The specific gravity (relative density) of the gold to the soil/sand is the physical property exploited in panning gold. The particles with lower density would float whilst the heavier gold sinks lower to the bottom of the pan by gravity and is decanted off.
I hope this explanation is easy to comprehend.
molar mass of A1C1 3
Answer:
Gold(III) chloride
An attempt at synthesizing a certain optically active compound resulted in a mixture of its enantiomers. The mixture had an observed specific rotation of 14.1°. If it is known that the specific rotation of the R enantiomer is –28.4°, determine the percentage of each isomer in the mixture. g
Answer:
The percentage of the R-enantiomer is 26.18% while the percentage of the S-enantiomer is 73.82%
Explanation:
If the specific rotation of R enantiomer = -28.4, then the specific rotation of S = +28.4
Now, let us have x = % R, thus
% S = 100-x =y
Hence;
{- 28.4x + 28.4( 100 -x)}/100= 14.1
Thus;
-28.4x + 2840 -28.4x = 1410
-56.8x + 2840 = 1410
-56.8x = 1410-2840
-56.8x = -1430
x = 1430/56.8
x = 26.18%
y = 100-26.18% = 73.82%
2. Points
Which of the following is not a characteristic of a transverse mechanical
wave?
A. It travels at less than the speed of light.
B. It involves displacing the medium perpendicular to the motion of
the wave
C. It looks a little bit like a snake.
D. It is also known as a compression wave.
Answer:
D
Explanation:
Logitudinal waves also known as compression waves.
It involves displacing the medium perpendicular to the motion of the wave is not a characteristic of a transverse mechanical wave. Option B is correct.
What are transverse mechanical waves?A transverse mechanical wave is a disturbance created by it to transfer energy from one point to another. while the proposition happens the particle present within the medium get vibrates.
in a transverse wave, the particle present will vibrate up and down and are perpendicular to the wave's propagation direction. The particles shake in a directional wave in the longitudinal wave propagation.
Therefore, is not a characteristic of a transverse mechanical wave. Option B is correct. It involves displacing the medium perpendicular to the motion of the wave.
Learn more about transverse mechanical waves, here:
https://brainly.com/question/23374194
#SPJ6
Ammonia will decompose into nitrogen and hydrogen at high temperature. An industrial chemist studying this reaction fills a tank with of ammonia gas, and when the mixture has come to equilibrium measures the amount of nitrogen gas to be 13. mol. Calculate the concentration equilibrium constant for the decomposition of ammonia at the final temperature of the mixture.
Complete Question
The complete question is shown on the first uploaded image
Answer:
The concentration equilibrium constant is [tex]K_c = 14.39[/tex]
Explanation:
The chemical equation for this decomposition of ammonia is
[tex]2 NH_3[/tex] ↔ [tex]N_2 + 3 H_2[/tex]
The initial concentration of ammonia is mathematically represented a
[tex][NH_3] = \frac{n_1}{V_1} = \frac{29}{75}[/tex]
[tex][NH_3] = 0.387 \ M[/tex]
The initial concentration of nitrogen gas is mathematically represented a
[tex][N_2] = \frac{n_2}{V_2}[/tex]
[tex][N_2] = 0.173 \ M[/tex]
So looking at the equation
Initially (Before reaction)
[tex]NH_3 = 0.387 \ M[/tex]
[tex]N_2 = 0 \ M[/tex]
[tex]H_2 = 0 \ M[/tex]
During reaction(this is gotten from the reaction equation )
[tex]NH_3 = -2 x[/tex](this implies that it losses two moles of concentration )
[tex]N_2 = + x[/tex] (this implies that it gains 1 moles)
[tex]H_2 = +3 x[/tex](this implies that it gains 3 moles)
Note : x denotes concentration
At equilibrium
[tex]NH_3 = 0.387 -2x[/tex]
[tex]N_2 = x[/tex]
[tex]H_2 = 3 x[/tex]
Now since
[tex][NH_3] = 0.387 \ M[/tex]
[tex]x= 0.387 \ M[/tex]
[tex]H_2 = 3 * 0.173[/tex]
[tex]H_2 = 0.519 \ M[/tex]
[tex]NH_3 = 0.387 -2(0.173)[/tex]
[tex]NH_3 = 0.041 \ M[/tex]
Now the equilibrium constant is
[tex]K_c = \frac{[N_2][H_2]^3}{[NH_3]^2}[/tex]
substituting values
[tex]K_c = \frac{(0.173) (0.519)^3}{(0.041)^2}[/tex]
[tex]K_c = 14.39[/tex]
The mass of an object with 500 J of kinetic energy moving with a velocity of 5 m/s is kg.
Answer:
[tex]m=20kg[/tex]
Explanation:
Hello,
In this case, we define the kinnetic energy as:
[tex]K=\frac{1}{2} m*v^2[/tex]
Thus, for finding the mass we simply solve for it on the previous equation given the kinetic energy and the velocity:
[tex]m=\frac{2*K}{v^2}=\frac{500kg*\frac{m^2}{s^2} }{(5\frac{m}{s})^2} =\frac{500kg*\frac{m^2}{s^2} }{25\frac{m^2}{s^2}}\\\\m=20kg[/tex]
Best regards.
Answer:
The answer is 40 kg
Explanation:
You will this formula below:
m=[tex]\frac{2*\\KE}{v^{2} }[/tex]
Now we know our formula, now we plug in the given numbers:
m=[tex]\frac{2(500J)}{(5m/s)^2}[/tex]
Simplify and we get:
m=40 kg
I hope this was helpful.
what is the name of the liquid in the clinical thermometer
Answer:I suppose it is mercury...
Explanation:
I don't say u must have to mark my ans as brainliest but if it has really helped u plz don't forget to thnk me...
Which of the following obervations would be classified as a physical change? A) Fireworks releasing light B) Antacid fizzing in water C) Steam condensing on a mirror D) Apple turning brown
Answer:
C) Steam condensing on a mirror
Explanation:
This was just a change in the physical state.
Clues about the history of the earth have been obtained from the study of
fossil fuels
rain forest materials
soll samples
O synthetic plastics
Answer: Fossil fuels
Explanation:
Fossil fuels such as petroleum, oil, and natural gas, are non-renewable energy resources which are formed from the remains of prehistoric ancient plants and animals beneath layers of rock of the earth surface.
By analyzing and studying fossil fuels using Radiocarbon analyses by archaeologists, earth scientists etc, Information about the history of the earth can be obtained from the decomposition of dead organisms present in fossil fuels.
If the sign for delta G is negative (spontaneous process) and the sign for delta S is positive (more disorder) for both dissolving processes, how could one be endothermic (positive delta H) and one be exothermic (negative delta H)
Answer: From your question,
One could be exothermic which means that the final enthalpy will be less than the initial enthalpy. H= Hf-Hi(Hf<Hi).
In Endothermic reaction, the entropy is lowered by absorbing energy in the surronding. By so doing, the surronding losses energy and the reaction is not spontaneous.
H is positive and S (entropy) is positive.
Explanation:
Exothermic reaction is the reaction where heat is released In the surronding which lead to increase in the surronding Temperature.
Endothermic reaction is the reaction that absorb heat from the surronding and decrease the surronding Temperature.
