Which of the following is an even function? g(x) = (x – 1)2 1 g(x) = 2x2 1 g(x) = 4x 2 g(x) = 2x

The missing dimension of the triangle is the height, which is 19 cm.

To find the missing dimension of the triangle, we can use the formula for the area of a triangle:

Area = (1/2) x base x height

We know that the area is 256.5 cm^2 and the base is 27 cm. Therefore, we can plug in these values into the formula and solve for the height:

256.5 = (1/2) x 27 x height

256.5 = 13.5 x height

height = 256.5 / 13.5

height = 19

Therefore, the missing dimension of the triangle is the height, which is 19 cm.

To know more about triangle refer here:

https://brainly.com/question/2773823

#SPJ11

The minimum sample size required is approximately 2507 individuals to accurately poll the proportion of Americans favoring a government-run, single-payer healthcare system within a 2% margin of error and with 99% confidence.

To determine the minimum sample size required for your poll on the proportion of Americans favoring a government-run, single-payer healthcare system, you need to consider the desired margin of error (2%), the confidence level (99%), and the estimated proportion from a previous poll (21%).

Step 1: Identify the critical value (Z-score) for a 99% confidence level. You can use a Z-score table or calculator for this. The critical value is approximately 2.576.

Step 2: Determine the margin of error (E). In this case, the margin of error is 2%, or 0.02.

Step 3: Use the estimated proportion (p) from the previous poll, which is 21%, or 0.21. Calculate the estimated proportion for not favoring the single-payer system (q), which is 1 - p, or 0.79.

Step 4: Apply the formula for the minimum sample size (n):

n = (Z^2 * p * q) / E^2

n = (2.576^2 * 0.21 * 0.79) / 0.02^2

n ≈ 2506.73

Since you cannot have a fraction of a person, round up to the nearest whole number. The minimum sample size required is approximately 2507 individuals to accurately poll the proportion of Americans favoring a government-run, single-payer healthcare system within a 2% margin of error and with 99% confidence.

To know more about poll, visit:

https://brainly.com/question/28844387#

#SPJ11

To calculate the cost for Design A and Design B, we need to know the size of each design in square inches. Once we have that information, we can multiply the size of each design by the cost per square inch of wood to determine the total cost.

Let's say Design A is 10 inches by 10 inches, which is a total of 100 square inches. To calculate the cost for Design A, we would multiply 100 by 0.15, which gives us a total cost of $15.

Similarly, let's say Design B is 8 inches by 12 inches, which is a total of 96 square inches. To calculate the cost for Design B, we would multiply 96 by 0.15, which gives us a total cost of $14.40.

Therefore, the cost for Design A is $15 and the cost for Design B is $14.40.

In summary, the cost of a wooden design can be calculated by multiplying the size of the design in square inches by the cost per square inch of wood. In this case, we used a cost of 0.15 per square inch and calculated the cost for Design A and Design B. It is important to know the size of the design before calculating the cost.

To know more about cost refer here

https://brainly.in/question/32001772#

#SPJ11

The scale factor used in the dilation of the triangles is 1/2

From the question, we have the following parameters that can be used in our computation:

The scale factor is calculated as

Scale factor  = X'/X

Substitute the known values in the above equation, so, we have the following representation

Scale factor  = (4, 1)/(8, 2)

Evaluate

Scale factor = 1/2

Hence, the scale factor is 1/2

Read more about scale factor at

brainly.com/question/29229124

#SPJ1

In the given equation, -7 + 4c = 7c + 6, the solution is c = -13/3

From the question, we are to solve the one-variable linear equation

From the given information,

The given equation is

-7 + 4c = 7c + 6

To solve the equation, we will determine the value of c

Solving the equation

-7 + 4c = 7c + 6

Subtract 4c from both sides of the equation

-7 + 4c - 4c = 7c - 4c + 6

-7 = = 3c + 6

Subtract 6 from both sides of the equation

-7 - 6 = 3c + 6 - 6

-13 = 3c

This can be wroitten as

3c = -13

Divide both sides by 3

3c/3 = -13/3

c = -13/3

Hence, the value of c is -13/3

Learn more on Solving linear equations here: https://brainly.com/question/27882730

#SPJ1

(a) When the input is (-7,-3), the rule (x,y) → (x-3,y+8) moves the point 3 units to the left and 8 units up.

So we can apply this rule to the input (-7,-3) as follows:

(-7,-3) → (-7-3,-3+8)

(-7,-3) → (-10,5)

Therefore, the output is (-10,5).

(b) When the input is (10,-5), the rule (x,y) → (x-3,y+8) moves the point 3 units to the left and 8 units up. So we can apply this rule to the input (10,-5) as follows:

(10,-5) → (10-3,-5+8)

(10,-5) → (7,3)

Therefore, the output is (7,3).

To know more about moves the point refer here

https://brainly.com/question/29988507#

#SPJ11

Step-by-step explanation:

we only need to calculate directly the work hours needed for 10 child bikes and 12 adult bikes.

as a child bikes needs 4 hours to build and 4 hours to test, for 10 child bikes that means 10×4 = 40 hours to build and 40 hours to test

an adult bike needs 6 hours to build and 4 his to test.

so, for 12 bikes that are 12×6 = 72 hours to build and 12×4 = 48 hours to test.

together that means we need

40 + 72 = 112 hours to build

40 + 48 = 88 hours to test

the limits of the company are 120 build hours and 100 test hours per week.

as 112 < 120 and 88 < 100, yes, the company can build 10 child bikes and 12 adult bikes in one week.

in fact, with that they still have 8 work hours (120 - 112) and 12 test hours (100 - 88) left and could therefore build either 2 additional child bikes (8 build hours, 8 test hours) or one additional adult bike (6 build hours, 4 test hours).

To solve this differential equation using separation of variables, we can rearrange it as:

dx/(x^2 + 36) = (t^2 + 4)/dt

Now we can integrate both sides:

∫ dx/(x^2 + 36) = ∫ (t^2 + 4)/dt

To integrate the left side, we can use the substitution u = x/6, du/dx = 1/6 dx, and dx = 6 du:

∫ dx/(x^2 + 36) = ∫ du/u^2 + 1

= arctan(x/6) + C1

To integrate the right side, we can use the power rule:

∫ (t^2 + 4)/dt = (1/3)t^3 + 4t + C2

Putting these together, we have:

arctan(x/6) = (1/3)t^3 + 4t + C

Where C = C2 - C1 is the constant of integration.

Now we can solve for x:

x/6 = 6 tan((1/3)t^3 + 4t + C)

x = 36 tan((1/3)t^3 + 4t + C)

Using the initial condition 2(0) = 6, we have:

x(0) = 36 tan(C) = 6

tan(C) = 1/6

C = arctan(1/6)

Therefore, the solution to the differential equation with the given initial condition is:

x = 36 tan((1/3)t^3 + 4t + arctan(1/6))

First, let's rewrite the equation using the given terms and separating the variables:

(t^2 + 4) dx/dt = (x^2 + 36)

Now, separate the variables:

dx/x^2 + 36 = dt/t^2 + 4

Next, we'll integrate both sides:

∫(1/(x^2 + 36)) dx = ∫(1/(t^2 + 4)) dt

Using the substitution method, we find:

(1/6) arctan(x/6) = (1/2) arctan(t/2) + C

Now, we'll use the initial condition 2(0) = 6 to find the value of C. Since 2(0) = 0, we have:

(1/6) arctan(6/6) = (1/2) arctan(0/2) + C

This simplifies to:

(1/6) arctan(1) = C

Therefore, the solution to the differential equation is:

(1/6) arctan(x/6) = (1/2) arctan(t/2) + (1/6) arctan(1)

Learn more about differential equation here: brainly.com/question/14620493

#SPJ11

The new diet was not effective, the researchers may need to continue searching for other solutions.

In the trial to determine whether a new diet reduces cholesterol, a group of twenty volunteers with high cholesterol were selected. The trial likely involved splitting the volunteers randomly into two groups - a treatment group and a control group.

The treatment group would be given the new diet to follow, while the control group would continue with their normal diet. The participants' cholesterol levels would be measured at the beginning of the trial, and then again at regular intervals throughout the trial to track any changes.

After the trial has ended, the researchers would analyze the results to see if there was a significant difference in cholesterol levels between the treatment and control groups. If the new diet was effective in reducing cholesterol, the researchers may recommend it as a potential treatment option for people with high cholesterol. However, if the new diet was not effective, the researchers may need to continue searching for other solutions.

Learn more about cholesterol

brainly.com/question/28330373

#SPJ11

Jhon bought a rectangular door mat that was 1/2 meter long and 3/10 meter wide. The area of the rectangular door mat is 3/20 square meters.

Find the area of John's rectangular door mat that is 1/2 meter long and 3/10 meter wide, you'll need to multiply the length by the width.
Identify the length and width.
Length = 1/2 meter
Width = 3/10 meter
Multiply the length and width to find the area.
Area = Length × Width
Area = (1/2) × (3/10)
Calculate the multiplication.
Area = 3/20 square meters
The area of the rectangular door mat is 3/20 square meters.

Read more about  rectangular.

https://brainly.com/question/21308574

#SPJ11

The domain of function is the set of all possible values of x for which the function is defined. In this case, the function G(x) = 5 - 2x is defined for all real numbers of x.

The collection of all feasible input values (x-values) for which a function may be defined is known as the domain of function. In other words, it is the collection of all x values that may be passed into the function and provide a legitimate result (a y-value).

The function G(x) = 5 - 2x in this instance is a linear function, meaning it is defined for all real values of x. This is so that we may plug in any real value for x, and the function will output a real number for G(x) that corresponds. As an illustration, when we enter x = 0, we obtain G(0) = 5 - 2(0) = 5, and when we enter x = 2, we obtain G(2) = 5 - 2(2) = 1.

To learn more about domain of function, refer to:
https://brainly.com/question/28934802

#SPJ4

Answer:

9th term is

[tex]a_9 = \dfrac{1280}{2187}\\[/tex]

Step-by-step explanation:

This sequence is clearly a geometric progression where the ratio of any term to the previous term is constant and known as common ratio

The 3 terms given are:
15, 10 and 20/3

10 ÷ 15 = 2/3

20/3 ÷ 10 = 2/3

So the common ratio is 2/3

For a geometric sequence with common ratio r and first term a₁, the nth term is given by the equation

aₙ = a₁ · rⁿ⁻¹

Here a₁  = first term = 15

r = 2/3

So the general equation for the nth term of this equation is
aₙ = 15 · (2/3)ⁿ⁻¹

The 9th term would be

[tex]a_9 = 15 \cdot \left(\dfrac{2}{3}\right)^{9-1}\\\\a_9 = 15 \cdot \left(\dfrac{2}{3}\right)^{8}\\\\a_9 = 15 \cdot \left(\dfrac{256}{6561}\right)\\\\a_9 = 15 \cdot \left(\dfrac{256}{6561}\right)\\[/tex]
15 is divisible by 3 giving 5
6561 is divisible by 3 giving 2187

So the above expression simplifies to
[tex]a_9 = 5 \cdot \dfrac{256}{2187}\\\\a_9 = \dfrac{1280}{2187}\\[/tex]

The P-value is less than the significance level of 0.01, we reject the null hypothesis.

Null Hypothesis: The proportion of adults who prefer window seats when they fly is 0.5 or less.

Alternative Hypothesis: The proportion of adults who prefer window seats when they fly is greater than 0.5.

Let p be the true proportion of adults who prefer window seats when they fly.

The sample proportion of adults who prefer window seats is:

= 520/813 = 0.639

The standard error of the sample proportion is:

SE = sqrt((1-)/n) = sqrt(0.639(1-0.639)/813) = 0.022

The test statistic is:

z = ( - 0.5)/SE = (0.639 - 0.5)/0.022 = 6.32

Using a normal distribution, the P-value is P(Z > 6.32) < 0.0001.

Since the P-value is less than the significance level of 0.01, we reject the null hypothesis.

Therefore, we conclude that there is sufficient evidence to support the claim that the majority of adults prefer window seats when they fly.

To learn more about window visit:

https://brainly.com/question/276025

#SPJ11

The type of bankruptcy that typically affects a person's credit score for seven years is Chapter 7 bankruptcy.

Chapter 7 bankruptcy involves the liquidation of assets to pay off debts, and it remains on a person's credit report for up to seven years from the filing date. This can have a significant negative impact on a person's credit score and their ability to obtain credit in the future.

Chapter 9 bankruptcy is specifically designed for municipalities such as cities, towns, and counties, and it does not apply to individuals or affect personal credit scores.

Chapter 11 bankruptcy is primarily used by businesses to reorganize their debts and continue operating. While it can affect a business owner's personal credit if they have personal liability for the business debts, it does not have a specific time frame for how long it remains on a credit report. The impact on an individual's credit score can vary depending on the circumstances and how the bankruptcy is structured.

Hence the answer is Chapter 7.

Learn more about bankruptcy click;

https://brainly.com/question/30628707

#SPJ12

Answer:

Chapter 13

Step-by-step explanation:

it’s not on there but that’s the answer

Let's start by finding the volume of the cistern at any given time t. Since the cistern is in the form of an inverted circular cone, its volume can be expressed as:

V = (1/3)πr^2h

where r is the radius of the circular opening, h is the height of the cone (which is also the depth of the cistern), and π is the constant pi.

We are given that the cistern is 5 meters deep, and the radius of its opening is 2 meters. Therefore, we can plug these values into the equation above to get:

V = (1/3)π(2^2)(5)

V = 20/3 π

Now, we need to find the rate at which the water level is rising in the cistern after 30 minutes. Let's call this rate dh/dt (the change in height with respect to time).

We know that the water is being added to the cistern at a rate of 65 liters per minute. Since 1 liter is equal to 0.001 cubic meters, the volume of water being added per minute is:

(65 liters/minute) × (0.001 m^3/liter) = 0.065 m^3/minute

Therefore, the rate at which the height of the water in the cistern is changing is:

dh/dt = (0.065 m^3/minute) / (20/3 π m^3) = 3.87/π meters/minute

After 30 minutes, the height of the water in the cistern will have risen by:

h = (65 liters/minute) × (0.001 m^3/liter) × (30 minutes) / (20/3 π m^3) = 0.2925 meters

Therefore, the rate at which the water level is rising in the cistern 30 minutes after the filling process began is:

dh/dt = 3.87/π meters/minute

To know more about cistern refer here

https://brainly.com/question/19698275#

#SPJ11

The 3rd Maclaurin polynomial for f(x) = tan x is P(x) = x + (1/3)x^3.

Recall that the Maclaurin series expansion for tan x is given by:

tan x = x + (1/3)x^3 + (2/15)x^5 + ...

To find the 3rd Maclaurin polynomial, we only need to take the first three terms of the series expansion, since n = 3.

Thus, the 3rd Maclaurin polynomial for f(x) = tan x is given by:

P(x) = x + (1/3)x^3.

Note that the first two terms of the polynomial, x and (1/3)x^3, correspond to the first two terms of the Maclaurin series expansion for tan x.

The third term of the polynomial would correspond to the next term in the series expansion, which is (2/15)x^5. However, since we are only finding the 3rd Maclaurin polynomial, we do not need to include this term.

For more questions like Polynomial click the link below:

https://brainly.com/question/11536910

#SPJ11

The height of the cone is 30 cm

The first step is to write out the parameters given in the question

Volume of the cone= 2560π cm³

Diameter of the circular base is 32 cm

radius= diameter/2

= 32/2

= 16

The formula for calculating the height of the cone is

Height= volume ÷ 1/3 πr²

height= 2560 πcm³ ÷ 1/3 πr²

height= 2560 ÷ 0.333(16²)

height= 2560 ÷ 0.333(256)

height= 2560÷ 85.248

height= 30

Hence the height of the cone is 30 cm

Read more on height here

https://brainly.com/question/16547340

#SPJ1

Answer:

height = 9.54cm

Step-by-step explanation:

Volume of a cone = 2560cm³

Radius = diameter/ 2 = 32/2 = 16

height = ?

volume of a cone =

[tex]volume \: of \: a \: cone = \frac{1}{3} \pi {r}^{2} h \\ 2560 = \frac{1}{3} \times \frac{22}{7} \times 16 \times 16 \times h \\ 2560 = \frac{22}{21} \times 256 \times h \\ 2560 = \frac{5,632h}{21} \\ 21 \times 2560 = 21 \times \frac{5632h}{21} \\ 53,760 = 5632h \\ \frac{53760}{5632} = \frac{5632h}{5632} \\ 9.54cm = h[/tex]

height = 9.54cm

The number of horizontal rails for 10 sections is

The rule for the post is to multiply the number of section by 3

The rule for the rail is to multiply the post by 2

The rules is calculated using the unit value and comparing with other values

the rule for the number of post

1 section requires 3 posts hence multiplication by 3, comparing shows that multiplying by 3 gives the number of post

the rule for the number of rails

1 section requires 6 rails hence multiplication by 6, comparing shows that multiplying each section by 6 gives the correponding number of rails

Learn more about function rule at;

https://brainly.com/question/30139621

#SPJ1

Ranking of the events below in the correct order from least likely to most likely are:

Event B

Event A

Event C

The probability of an event is defined as a number that describes the chance that the event will eventually happen. An event that is sure to happen has a probability of 1. An event that can never possibly happen has a probability of zero. Finally, If there is a chance that an event will happen, then it will have a probability that is between zero and 1.

i) Arrow lands on a section labeled with an odd number: The odd numbers here are 1 and 3.

There are a total of four 1's, and two 3's. This tells us that there are 6 odd numbers on the spinner.

There are 8 numbers in total on the spinner. Thus, 6 out of the 8 numbers are seen as odd numbers. Therefore, the probability that the arrow lands on an odd number would be:

P(odd number) = 6/8 =  75%

ii) Arrow lands on a section labeled with the number 1: There are four 1's on the spinner, and there are seen to be 8 numbers in total on the spinner. Thus, the probability of the arrow landing on a 1 is:

P(Number 1) = 4/8 = 50%.

iii) Arrow lands on a section labeled with a number less than 4:

The numbers that are less than 4 are 3, 2, and 1.

There are two 3's.

There is one 2.

There are four 1's.

2 + 1 + 4 = 7.

The probability of the arrow landing on a number less than 4 is 7/8, which is 88.5%.

Read more about Probability of Occurrence at: https://brainly.com/question/28151602

#SPJ1

The probability that a customer has to wait for one of the consultants (Pw) is 0.9516.

To find the probability that a customer will have to wait for one of the consultants, we need to analyze the current system and compare it to the proposed system with two consultants. Here's a step-by-step explanation:

1. Identify the given parameters:
- Arrival rate (λ) = 7 calls per hour
- Service rate (µ) = 1 call per 8.5 minutes = 60 minutes / 8.5 minutes = 7.06 calls per hour (approximately)

2. Calculate the traffic intensity (ρ):
- ρ = λ / µ = 7 / 7.06 = 0.9915 (approximately)

3. Find the probability of 0 customers in the system (P0) for a 2-consultant system:
- P0 = 1 / (1 + (2 * ρ) + (ρ^2 / (1 - ρ))) = 1 / (1 + (2 * 0.9915) + (0.9915^2 / (1 - 0.9915))) ≈ 0.0086

4. Calculate the probability that a customer has to wait for one of the consultants (Pw):
- Pw = (ρ^2 / (2 * (1 - ρ))) * P0 = (0.9915^2 / (2 * (1 - 0.9915))) * 0.0086 ≈ 0.9516

So, there is approximately a 95.16% chance that a customer will have to wait for one of the consultants at Ocala Software Systems' technical support center when two consultants are employed.

Learn more about probability,

https://brainly.com/question/24756209

#SPJ11

The algebraic expression for the weigh of both baskets where each one contains pumpkins and carrots in kilos is equals to the 7x + 2, in kilos.

We have two baskets where each one contains pumpkins and carrots. We have to determine the both baskets weigh together in kilos. Let's assume that

The number of pumpkins in second basket = x kilos

Now, according to first scenario, first basket contains the pumpkins twice as many kilos of pumpkin as in the second basket. That is the number of pumpkins in first basket = 2x kilos

In second case, the second basket there are three more kilos of carrots than there are kilos of pumpkin in the first. So, the number of carrots in second basket

= (3 + 2x ) kilos

In third case, the first basket has 4 kilos less carrot than the second, that is x

=( ( 3 + 2x) - 4 ) kg

Now, weigh of first basket = carrots + pumpkins = (2x + 2x - 1) kilos

= (4x - 1 ) kilos

Weigh of second basket = carrots + pumpkins = (3 + 2x) kilos + x kilos

= (3 + 3x) kilos

So, weigh of both baskets together

= (4x - 1 ) kilos + (3 + 3x) kilos

=( 7x + 2 ) kilos.

Hence, required expression is 7x + 2.

For more information about algebraic expression,

https://brainly.com/question/4344214

#SPJ4

Complete question:

You have two baskets. Each contains pumpkins and carrots. In the first basket there are twice as many kilos of pumpkin as in the second, and in the second there are three more kilos of carrots than there are kilos of pumpkin in the first. The first basket has 4 kilos less carrot than the second. How many kilos do both baskets weigh together? Represent it algebraically

To produce an A note on a C string (5 notes higher) that is 70 cm long we should place a fret at a distance of 74.92cm from bridge.

To find where to place the fret, we use the formula:

distance from bridge = (string length) x [tex]2^{(n/12)[/tex]

In this case, the string length is 70 cm and we want to produce an A note on a C string, which is 5 notes higher.         So n = 5.

distance from bridge = [tex]70 * 2^{(5/12)[/tex]

Using a calculator, we get:

distance from bridge ≈ 74.92 cm

Therefore, the answer is d. 74.92 cm, rounded to the nearest hundredth.

To know more about fret refer here:

https://brainly.com/question/11667033

#SPJ11

a. The slope and intercept of the least-squares line are -0.752 and 88.761, respectively.

b. The linear model may be useful for predicting ozone levels from relative humidity, but only to a limited extent. The R-squared value of 0.22 indicates that only 22% of the variation in ozone levels can be explained by relative humidity.

Additionally, the 95% prediction interval for a new observation (20.86, 66.37) is relatively wide, which suggests that the model may not be very precise in its predictions.

c. To predict the ozone level for a day when the relative humidity is 50%, we plug in x = 50 into the regression equation: Ozone = 88.8 - 0.752(50) = 53.8 ppb.

d. The correlation between relative humidity and ozone level can be found by taking the square root of the R-squared value, which gives us a correlation coefficient of 0.47.

This indicates a moderate positive correlation between relative humidity and ozone levels.

e. To find a 90% confidence interval for the mean ozone level for days where the relative humidity is 60%, we use the formula:

Mean ozone level ± (t-value)*(SE Fit)/sqrt(n), where the t-value is obtained from a t-distribution with n-2 degrees of freedom and a 90% confidence level.

For n = 120 and a 90% confidence level, the t-value is approximately 1.66. Plugging in the values, we get: 43.62 ± 1.66*(1.2)/sqrt(120), which simplifies to (42.39, 44.85).

f. To determine if a predicted ozone level of 80 ppb is reasonable when the relative humidity is 60%, we can calculate the 95% prediction interval for a new observation with x = 60: 43.62 ± 2.064*(11.43) = (21.18, 66.06).

Since the predicted value of 80 ppb falls outside of this range, it is not a reasonable prediction.

A more reasonable range of predicted values would be the 95% prediction interval, which gives us a range of (21.18, 66.06).

To know more about intercept refer here

https://brainly.com/question/14180189#

#SPJ11

volume =πr^2h

=π(9)^2*12

=π81*12

=972πcm^3

To solve this problem, we can use the multiplication rule of probability, which states that the probability of two or more independent events occurring together is the product of their individual probabilities.

Let L, R, and S be the events that a vehicle turns left, turns right, and goes straight on, respectively. We want to find the probability of the following event:

E: One vehicle goes straight on and the other two either both turn left or both turn right.

We can break down event E into two sub-events: one vehicle goes straight on and the other two vehicles both turn left or both turn right. Let's calculate the probabilities of these sub-events separately:

- Probability that one vehicle goes straight on: P(S) = 0.3

- Probability that the other two vehicles both turn left or both turn right: P((LL) or (RR)) = P(LL) + P(RR)

To find P(LL) and P(RR), we can use the multiplication rule again. Since the events are independent, we can multiply their individual probabilities:

- Probability that two vehicles both turn left: P(LL) = P(L) × P(L) = 0.55 × 0.55 = 0.3025

- Probability that two vehicles both turn right: P(RR) = P(R) × P(R) = 0.15 × 0.15 = 0.0225

Therefore, the probability of event E is:

P(E) = P(S) × P((LL) or (RR))

    = 0.3 × (P(LL) + P(RR))

    = 0.3 × (0.3025 + 0.0225)

    = 0.0975

So the probability that, of the next three vehicles approaching the junction from town A, one goes straight on and the other two either both turn left or both turn right is 0.0975 or approximately 0.1 (rounded to one decimal place).

To know more about probability  refer here

https://brainly.com/question/30034780#

#SPJ11

Answer:

423.9

Step-by-step explanation:

To solve this problem you need to use the formula for surface area. This formula can either be used with the radius or the diameter. I prefer using diameter because it is easier to remember and it is easier to calculate. The formula writes as follows: [tex]SA=d\pi h+d\pi ^{2}\\\\[/tex]. To use this formula all we have to do is insert the values into the formula and solve.

[tex]SA=d\pi h+d\pi ^{2}\\\\SA=(9)\pi(6)+\pi(9) ^{2}\\\\SA=54\pi+81\pi\\\\SA=54\pi+81\pi\\\\SA=135\pi\\\\SA=423.9[/tex]

423.9 is our answer.

Answer:

1+3x

Step-by-step explanation:

[tex] \sqrt{1 } = 1 \\ 1 + 3x = 1 + 3x[/tex]

The sum of the series is 1/16. The given series is: ∑ [infinity] 5(−1)nπ2n + 1 / 32n + 1(2n + 1)!

To find the sum of the series, we can use the ratio test to check the convergence of the series. First, let's take the ratio of the (n+1)th term to the nth term: | a(n+1) / a(n) | = 5π2 / 32(2n + 3)(2n + 2)(2n + 1)

As n approaches infinity, the denominator of the ratio tends to infinity, making the ratio go to zero. Therefore, by the ratio test, the series converges.

Now, we need to find the sum of the series. To do this, we can use the formula for the sum of an infinite series: S = lim [n → ∞] Sn, where Sn is the nth partial sum of the series.

Using partial fractions, we can write the series as: 5π2 / 32n + 1 (2n + 1)! = 1 / 64 [ 1 / (n!) - 1 / (2n + 1)! ] - 5π2 / 32(2n + 3)(2n + 2)(2n + 1)

Substituting this expression into Sn and simplifying, we get: Sn = (1 - cos(π/4n+1)) / 32

Taking the limit as n approaches infinity, we get: S = lim [n → ∞] Sn = 1 / 16 Therefore, the sum of the series is 1/16.

To know more about ratio test, refer here:

https://brainly.com/question/15586862#

#SPJ11

Jerry pays $279.40 this year in property taxes.

To calculate Jerry's property taxes for the year, we need to first decide how many of his month-to-month maintenance fee is going toward property taxes.

The problem states that 20% of the price is for Jerry's assets taxes, which means we will calculate the amount of his belongings taxes with the aid of finding 20% of his monthly charge.

To do this, we multiply the price through 0.20 such as this:

20% of $1,397 = 0.20 x $1,397 = $279.40

Therefore, Jerry pays $279.40 this year in property taxes.

Learn more about property taxes:-

https://brainly.com/question/13887483

#SPJ4

The linear function rule that models the cost y of a package containing any number x of comic books is y = $6.50 + $1.00x and for 10 comic books, the second store has the better deal.

A linear function is a mathematical function where the graph of the function is a straight line. It can be written in the form y = mx + b, where x and y are the variables, m is the slope of the line, and b is the y-intercept (the point where the line intersects the y-axis). The slope represents the rate of change of the function, while the y-intercept is the value of the function when x is equal to zero.

To write a linear function rule that models the cost y of a package containing any number x of comic books, we can use the given information to set up a system of equations:

Poster + 2 Comics = $7.50

Poster + 11 Comics = $16.50

We can solve for the cost of the poster and the cost of one comic book by subtracting the first equation from the second:

9 Comics = $9.00

1 Comic = $1.00

Then, we can use the cost of one comic to set up a linear function rule:

y = cost of poster + cost of x comics

y = $6.50 + $1.00x

Therefore, the linear function rule that models the cost y of a package containing any number x of comic books is y = $6.50 + $1.00x.

For the second store, the linear function rule is given as y = $5.75 + $1.00x.

To determine which store has the better deal, we can compare the cost of each package for a specific number of comic books. For example, if we want to buy 10 comic books, the cost at the first store would be:

y = $6.50 + $1.00(10) = $16.50

The cost at the second store would be:

y = $5.75 + $1.00(10) = $15.75

Therefore, for 10 comic books, the second store has the better deal. However, for a different number of comic books, the better deal may be at a different store. We can use the linear function rules to compare the costs for any number of comic books

Learn more about Linear function here:

brainly.com/question/20286983

#SPJ1