Answer:
B
Explanation:
provide two ways that objects can become charged
Answer:
friction, conduction and induction
Explanation:
Had it in class I had it correct hope this helps.
Dr. Evil stands on a 150 m high cliff and drops the kittens straight down. Fill out the following table that shows how the velocity and acceleration of the kittens change with time during their fall.
PLEASE help!!
"A gas has an initial pressure of 296 atm, is now at 1246 atm (final pressure) and a final volume of 72 L, what is the initial volume of this gas?"
Answer:
in which standard you are, i am typing your answer till please reply.
Tyler is driving home from school and finds that there is road construction being done on his favorite route so he has to take a detour. Tyler travels 4 km North, 8 km East, 3 Km South, 4 Km West and 6 Km South. What is Tyler's displacement ?
Answer:
6.4kmExplanation:
First we must know that the direction along the vertical are towards North and south while along the horizontal are towards east and west.
Sum of distances along the vertical
4km due north = +4km
3 Km South = -3km (south is along the negative y direction)
6 Km South = -6km
total distance along the vertical = 4-3-6 = -5km
Sum of distances along the horizontal;
8km due East = +8km
4 Km west = -4m (west is along the negative x direction)
total distance along the horizontal = 8-4 = 4km
Displacement is gotten by using Pythagoras theorem
d² = x²+y²
d² = (4)²+(-5)²
d² = 16+25
d² = 41
d = √41
d = 6.4km
Hence Tyler's displacement is 6.4km
Answer:
same as other person
Explanation:
10. A boat traveling at 9.5 m/s reduces its acceleration at a rate of 2.5 m/s2. What is the final speed of the boat
after it travels 12 meters?
Answer:
6.75m/s
Explanation:
using the second equation of motion, the time is calculated.
and with the formula a= (v - u)/t
where a is acceleration but in this case it's deceleration (and should be negated as you solve it ) .
v is final velocity
u is initial velocity
t is time taken
The carrot hangs from the ceiling by two ropes (1 and 2).
What is the correct free body diagram for the carrot?
Answer:
The Answer is D!
Explanation:
I checked it on Khan Academy.
The correct free body diagram of the hanging carrot is option B, where, the forces from two ropes and the net force acting upward and the gravitational force acting downwards.
What is free body diagram?A free body diagram is a representation of a body with different kinds of forces acting upon it with respect to its position and direction.
There are different kinds of forces namely magnetic force, tension force, nuclear force, gravitational force and the normal force etc. The force acting on a massive moving body will be the product of its mass and acceleration.
The direction of each force acting upon a body will be different and the displacement also. Here, the carrot hanged by the two ropes will experience forces from both ropes which hangs it down but the force acting is upwards and thus the net force is upward.
The gravitational force Fg acting on a body is always downward and thus the correct diagram depicting the free body of the carrot with forces is option B.
To find more about forces, refer the link below;
https://brainly.com/question/13191643
#SPJ5
15. Calculate The coefficient of kinetic friction be-
tween a large box and the floor is 0.21. A person pushes
horizontally on the box with a force of 160 N for a
distance of 2.3 m. If the mass of the box is 72 kg, what is
the total work done on the box?
Answer:
Wt = 26.84 [N]
Explanation:
In order to solve this problem we must use the definition of work in physics. Which tells us that this is equal to the product of force by distance.
In this case, we must sum the works of the force applied by the box and the friction force that also acts on the box.
The friction force is defined as the product of the normal force by the coefficient of friction.
f = N*μ
where:
N = normal force = m*g [N] (units of Newtons)
m = mass = 72 [kg]
g = gravity acceleration = 9.81 [m/s²]
f = friction force [N]
μ = friction coefficient = 0.21
f = 72*9.81*0.21
f = 148.32 [N]
Now the total work:
Wt = WF - Wf
where:
Wt = total work [J] (units of Joules)
WF = work by the pushing force [J]
Wf = work done by the friction force [J]
Wt = (160*2.3) - (148.32*2.3)
Wt = 26.84 [N]
Note: The friction force exerts a negative work, because this force is acting in opposite direction to the movement, therefore the negative sign.
Which skateboarder has greater momentum?
Skateboarder A: mass = 60 kg; velocity = 1.5 m/s
Skateboarder B: mass = 50 kg; velocity = 2.0 m/s
Answer:
b
Explanation:
1. What is weight? What is mass? How are mass and weight different?
2. How does mass affect weight
Importance of measurement
Answer:
Without the ability to measure, it would be difficult for scientists to conduct experiments or form theories. Not only is measurement important in science and the chemical industry, but it is also essential in farming, engineering, construction, manufacturing, commerce, and numerous other occupations and activities.
Explanation:
Make sure to edit so you're not copy-writed and if this was helpful could I please get brain-list
10. A golf ball is propelled with an initial velocity of 60
meters per second at 37° above the horizontal. The
horizontal component of the golf ball's initial veloc-
ity is
the horizontal component of the golf ball's initial velocity is 47.92 m/s.
The given parameters;
initial velocity of the golf, v = 60 m/s
angle of projection of the golf, Ф = 37°
The horizontal component of the golf ball's initial velocity is calculated as follows;
[tex]v_0_x = v\times cos(\theta)\\\\[/tex]
[tex]v_0_x[/tex] = 60 m/s x cos (37)
[tex]v_0_x[/tex] = 60 m/s x 0.7986
[tex]v_0_x[/tex] = 47.92 m/s
Thus, the horizontal component of the golf ball's initial velocity is 47.92 m/s.
Learn more here: https://brainly.com/question/14304606
Which type of image can be projected on a screen?
real
plane
imaginary
virtual
This Is My Last Question PLZ Help
Answer:
A real image.
Explanation:
A real image is formed by real interaction of rays, hence it is possible to project it on a screen. And where a virtual image is drawn via back tracing the path of reflected rays, hence they don't meet in reality.
Where would you find information about an organization's guidelines for moral behavior?
a table is pushed 15m across a room with a force of 50n.
a) what is the work don?
b) if it takes 20 seconds to push the table across the room.what is the power?
Answer:
The work is 750 J
The power is 37.5 watt
Explanation:
Mechanical Work and Power
Mechanical work is the amount of energy transferred by a force. It's a scalar quantity, with SI units of joules.
Being [tex]\vec F[/tex] the force vector and [tex]\vec s[/tex] the displacement vector, the work is calculated as:
[tex]W=\vec F\cdot \vec s[/tex]
If both the force and displacement are parallel, then we can use the equivalent scalar formula:
W=F.s
Power is the amount of energy transferred or converted per unit of time. In the SI, the unit of power is the watt, equal to one joule per second.
The power can be calculated as:
[tex]\displaystyle P=\frac {W}{t}[/tex]
Where W is the work and t is the time.
a)
The table is pushed d=15 m across a room with a force F=50 N, thus the work is:
W=50 * 15 = 750 J
The work is 750 J
b)
The time needed to push the table is t=20 seconds, thus:
[tex]\displaystyle P=\frac {750}{20}=37.5[/tex]
The power is 37.5 watt
Find the minimum diameter the larger cylinder of a hydraulic press can have if it is to lift a 1.1 x 10^4 N car with an applied liquid pressure of 420 N/cm^2 in the smaller cylinder, having a diameter of 1.5 cm.
Answer:
diameter = 5.78 cm .
Explanation:
According to Pascal's law, pressure will be equally transferred from smaller to larger cylinder.
Let the radius of larger cylinder be r cm
cross sectional area = π r²
pressure created on larger cylinder = 1.1 x 10⁴ / π r²
This pressure must be equal to 420 N / cm²
1.1 x 10⁴ / π r² = 420
r² = 8.34
r = 2.89 cm
diameter = 5.78 cm .
this will give brainliest
Answer:
It is likely to be option B: 50 degrees and 50 degrees
Hope it helps.......... pls mark as brainliest.
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli's statement?
Answer:
c. It is incorrect because sodium phosphate is a compound that has a single composition.
Explanation:
As we know that the sodium phosphate i.e. chemical compounds comprise of atoms that are interconnected with the bonds of the chemicals
Also the pure substance that is made by only and only one atom or element or only one type of molecule i.e. compound that contains definite and constant composition with different properties of chemicals
the pure substances could be distinct in chemical way but not in the physical manner that represents the difference between the mixture and the pure substance
Hence, the correct option is c.
Answer:
C) - It is incorrect because sodium phosphate is a compound that has a single composition.
Explanation:
Just did the test, good luck :)
Question 2
Radioactive dating involves determining which of the following?
Half-life decay
Index fossils
Depth of layers
Geologic time
Question 3
What process uses rock layers and index fossils to determine an object's estimated age?
Radioactive dating
Law of superposition
Relative dating
Geologic time
a match is being is an example of
A match is being is an example of multiple energy transformations
A passenger on a jet airplane claims to be able to walk at a speed in excess of 500 mph. Can this be true?
Explain!
Answer:noo
Explanation:impossible
my third time trying asxhcgxvbsxnsxfsgxscn gOsSHsHSHSHh look at the picture :))
suppose you want to model girlfriend of a baby orangutan which type of model would you choose
Answer:
That model grilfriend would probably only want me for the cash and would talk to a million other guys...but the baby orangutan would love me and I would be able to take care of a cute baby!!:)
Explanation:
How do you increase the amount of electrical energy produced from running water?
Answer:
To increase the volume of moving water, impoundments or dams are used to collect the water. An opening in the dam uses gravity to drop water down a pipe called a penstock. The moving water causes the turbine to spin, which causes magnets inside a generator to rotate and create electricity.
Explanation:
Hope this helped, Have a Great Day!!
A chemical change can be represented by ____________ changing into _____________ in a ________________.
A. Products, reactants, chemical reaction
B. Chemical reaction, reactants, products.
C. Chemical reaction, products, reactants
D. Reactants, products, chemical reaction
Answer:
D
Explanation:
A runner is training and runs past meter mark 65 and starts a stopwatch. After the runner passes meter mark 15 the stopwatch stops at 8 seconds. What was the runners velocity?
Question 5 options:
-6.25 m/s
6.25 m/s
8.13 m/s
-1.88 m/s
Answer:
-6.25 m/s
Explanation:
i took the quiz
Two blocks, with masses m1= 1.5kg and m2= 2.5kg approach each other
with initial velocities; V1= 2.0 m/s and V2i= 3.0 m/s. The two blocks
collide, in a totally inelastic collision, what is their common final velocity
after collision? *
Answer:
2.625 m/s
Explanation:
This is a momentum question. Momentum is conserved which means that all the starting momentum must be accounted for.
1.5 kg * 2 m/s + 2.5 kg * 3 m's = (1.5 + 2.5)kg * x m/s
3 kg m/s + 7.5 kg m/s = 4 kg * x
10.5 kg m/s = 4 kg x
10.5 / 4 = x
x = 2.625 m/s
inelastic means that after the collision, the masses stick together as though they were one.
Sphere A has an excess of 10 ^ 15 electrons and sphere B has an excess of 10 ^ 13 protons. They are separated by 2.0 m. What is the force between them?
A. -0.58 N
B. 0.58 N
C. 2.30 N
D. -2.30 N
A golf ball is hit horizontally off the edge of a 30 m high cliff and lands a distance of 25 m from the edge of the cliff. What was the initial vertical velocity of the golf ball?At what time did the golf ball hit the ground?What was the initial horizontal velocity of the golf ball? What was the final horizontal velocity of the golf ball?
Answer:
V₀y = 0 m/s
t = 2.47 s
V₀ₓ = 61.86 m/s
Vₓ = 61.86 m/s
Explanation:
Since, the ball is hit horizontally, there is no vertical component of velocity at initial point. So, the initial vertical velocity (V₀y) will beL
V₀y = 0 m/s
For the initial vertical velocity of golf ball we consider the vertical motion and apply 2nd equation of motion:
Y = V₀y*t + (0.5)gt²
where,
Y = Height = 30 m
g = 9.8 m/s²
t = time to hit the ground = ?
Therefore,
30 m = (0 m/s)(t) + (0.5)(9.8 m/s²)t²
t² = 30 m/4.9 m/s²
t = √6.122 s²
t = 2.47 s
For initial vertical velocity we analyze the horizontal motion of the ball. We neglect the frictional effects in horizontal motion thus the speed remains uniform. Hence,
V₀ₓ = Xt
where,
V₀ₓ = Initial vertical Velocity = ?
X = Horizontal Distance = 25 m
Therefore,
V₀ₓ = (25 m)(2.47 s)
V₀ₓ = 61.86 m/s
Due, to uniform motion in horizontal direction:
Final Vertical Velocity = Vₓ = V₀ₓ
Vₓ = 61.86 m/s
1. What are valence electrons used for by an element?
Answer:
An element's valence electron tells us about its ability to react and not react. More rules to this, but that's the gist of it. it also helps us form bonds
Explanation:
Valence electrons are used by an element for bonding and ionization, contributing to the element's chemical reactivity and behavior.
Valence electrons also play a vital role in ionization, which refers to the process of gaining or losing electrons to form ions. Elements tend to gain or lose electrons in order to achieve a stable electron configuration, typically by acquiring a full valence shell.
Metals, located on the left side of the periodic table, have fewer valence electrons, often one or two, and tend to lose them to form positive ions (cations). This characteristic makes them good conductors of electricity.
Nonmetals, located on the right side of the periodic table, have a nearly full valence shell and tend to gain electrons to achieve a stable configuration, forming negative ions (anions). Nonmetals generally do not conduct electricity as well as metals.
In summary, valence electrons are used by an element for bonding, where they participate in the formation of covalent and ionic bonds, and for ionization, where they are gained or lost to form ions and achieve a stable electron configuration.
To know more about electrons here
https://brainly.com/question/12001116
#SPJ6
Calcula la fuerza magnética de una carga que se desplaza hacia la derecha con una velocidad de 5 X 10 a la 6 metros sobre segundo. Que forma un campo magnético de 0.8 Teslas. Recuerda que la carga de un electrón es de 1.602 X 10 a la menos 19 [Coulombs]
Answer:
La fuerza magnética del electrón es 6.41x10⁻¹³ N.
Explanation:
Podemos encontrar la fuerza magnética (F) usando la ley de Lorentz:
[tex] F = qv\times B [/tex]
En donde:
q: es la carga del electrón = 1.602x10⁻¹⁹ C
v: es la velocidad del electrón = 5x10⁶ m/s
B: es el campo magnético = 0.8 T
[tex] F = qv\times B = 1.602 \cdot 10^{-19} C*5\cdot 10^{6} m/s*0.8 T = 6.41 \cdot 10^{-13} N [/tex]
Por lo tanto, la fuerza magnética del electrón es 6.41x10⁻¹³ N.
Espero que te sea de utilidad!
