Which kind of wave interaction is shown?

Answers

Answer 1

Answer:

where?

Explanation:

ill edit my answer when see it


Related Questions

This is my question​

Answers

All of the above hope this could
Help!

Answer:

baby yoda

Explanation:

A rock climber is scaling rock wall at 10 m above the ground, and is moving downward at a speed of 0.25 m/s. If their phone falls out of their back pocket, how long before it shatters onto the ground?

Answers

Answer:

The time taken before the phone hits the ground is 1.4 s.

Explanation:

Given;

height of the rock wall, h = 10 m

speed of the climber, v = 0.25 m/s

The time taken before the phone hits the ground is given;

h = ut + ¹/₂gt²

10 = 0.25t + ¹/₂(9.8)t²

20 = 0.5t + 9.8t²

9.8t² + 0.5t - 20 = 0

solving this quadratic equation;

t = 1.4 s

Therefore, the time taken before the phone hits the ground is 1.4 s.

Assume you are in the car and the car is moving at a certain speed to
school. Are you at rest or in motion with respect to the school? With
respect to the car?​

Answers

You are at rest with respect to the car.
You are in motion with respect to the School.

If you can answer my last post ill give you 75 points pls its very important and please make sure it correct!!!!!!!

Answers

Answer:

I can't see the post :/

Explanation:

Answer:

ok

Explanation:

ok how many points is this?????

Taking your hands off the wheel is an example of what type of driver distraction?
manual
visual
cognitive
adaptation ​

Answers

Answer:

manual

Explanation:

A manual distraction is when a driver takes their hand(s) off the wheel for any reason, for any amount of time. Without both hands on the wheel, your reaction time suffers, and so does your ability to steer.

The above photo shows Plates A and B at an mid ocean ridge. If you were to draw arrows on the plates showing plate movement, which way would you draw arrows?
A . The arrows on plates A and B would show the plates moving in the same direction
B . The arrows on plates A and B would show the plates moving towards eachother
C . The arrows on plates A and B would show the plates moving in random directions
D . The arrows on plates A and B would show the plated moving away from each other

Answers

Answer:

D . The arrows on plates A and B would show the plated moving away from each other

Explanation:

The correct arrow in this instance will show that the plates A and B would be moving away from each other.

At the mid-ocean ridge, two plates are moving apart and pulling away from one another.

In short, at the mid-oceanic ridge, we have a divergent margin. At a divergent margin, the plates are spreading or moving apart.

What famous equation describes the energy of stars?

Answers

Answer:

E=mc2

Explanation:

It explains that in their interiors, atoms fuse together, creating energy.

To solve this we must be knowing each and every concept related to energy and its different types. Therefore, the famous equation that describes the energy of stars is E=mc².

What is energy?

In physics, energy is the capacity to accomplish work. It can be potential, kinetic, thermal, electric, chemical, radioactive, or in other forms.

There is also heat and work—energy inside the process of being transferred by one body to the other. Energy is always classified according to its type once it has been transmitted. As a result, heat transported could become thermal energy, whereas labor done may emerge as mechanical energy. The famous equation that describes the energy of stars is E=mc²

Therefore, the famous equation that describes the energy of stars is E=mc².

To know more about energy, here:

https://brainly.com/question/29763772

#SPJ2

A 600 kg rocket sled can be accelerated at a constant rate from rest to 1400 km/h in 2.1 s. What is the magnitude of the required net force

Answers

Answer:

7.2 × 10^5 N

Explanation:

The first step is to convert 1400 km/hr to m/s

= 1,400×1000/3600

= 1,400,000/3600

= 388.88 m/s

The acceleration can be calculated as follows

a= v-u/t

= 388.88/2.1

= 185.18

Therefore the required net force can be calculated as follow

= 388.88 × 185.18

= 7.2 × 10^5 N

A piston has an external pressure of 15.0 atmatm. How much work has been done in joules if the cylinder goes from a volume of 0.120 liters to 0.450 liters

Answers

Answer: Work done is  - 501.56 J

Explanation:

Given that;

External pressure P = 15.0 atm

Volume V1 = 0.120 liters

Volume V2 = 0.450 liters

Work done = ?

we know that; Work = -Pdv

where P is pressure and dv is change in volume

so we substitute our values into the equation

Work = -15.0 × ( 0.450 - 0.120)

= -15 × 0.33

= - 4.95 atm/L

we know that;

1 atm.L = 101.325 J

so

- 4.95 atm/L = 101.325 J × -4.95 atm/L ÷

= - 501.56 J

Therefore Work done is  - 501.56 J

A heavy storm leaves 1 cm of rain on a city 5 km wide and 8 km long on a 2 hour period. How many cm3 of water fell on the city?

Answers

Answer: wow that’s hard

Explanation:

An amateur golfer swings a golf club, striking a golf ball that has a mass of 55.0 g. The club is in contact with the ball for only 0.00360 s. After the collision, the ball leaves the club at a speed of 34.0 m/s. What is the magnitude of the average force (in N) exerted on the ball by the club?

Answers

Answer:

The average force ≅ 519.44 N.

Explanation:

Impulse = change in momentum of a body

i.e Ft = m(v - u)

where F is the force, t is the time, m is the mass of the body, v is the final velocity and u is the initial velocity.

m = 55.0 g (0.055 Kg), t = 0.00360 s, v = 34.0 m/s, since the ball was initially at rest; u = 0 m/s

So that,

F x 0.00360 = 0.055(34 - 0)

F x 0.00360 = 0.055 x 34

                    = 1.87

F = [tex]\frac{1.87}{0.0036}[/tex]

 = 519.4444

The average force exerted on the ball by the club is approximately 519.44 N.

What property of a wave remains unchanged when a wave enters a different medium? 5 points amplitude frequency wavelength velocity

Answers

Answer:

frequency

Explanation:

When a wave enters a different medium, the property that remains unchanged is the frequency of the wave.

The frequency of a wave is defined as the number of wave cycles passing a given point per unit time. It represents the rate at which the wave oscillates or repeats its pattern.

The frequency of a wave remains constant when it enters a different medium, regardless of any changes in other properties such as amplitude, wavelength, or velocity.

Therefore, When a wave enters a different medium, the property that remains unchanged is the frequency of the wave.

To know more about the frequency:

https://brainly.com/question/29739263

#SPJ6

Please help me with this question guys.

Answers

Answer:

The average speed is 22.2 km/h

Explanation:

Average Speed

Given an object travels a total distance d and took a total time t, then the average speed is:

[tex]\displaystyle \bar v=\frac{d}{t}[/tex]

The mailman first drives d1=7 km at v1=15 km/h. The time taken to drive is:

[tex]\displaystyle t1=\frac{d1}{v1}=\frac{7}{15}=0.467\ h[/tex]

Then he drives d2=7 km at v2=43 km/h taking a time of:

[tex]\displaystyle t2=\frac{d2}{v2}=\frac{7}{43}=0.163\ h[/tex]

The total time is

t=0.467 h + 0.163 h = 0.63 h

The total distance is

d = 7 km + 7 km = 14 km

The average speed is:

[tex]\displaystyle \bar v=\frac{14}{0.63}=22.2\ km/h[/tex]

The average speed is 22.2 km/h

Objects are lighter on the moon than they are on earth. if an object A weighs 25lbs on the Moon and another object B weighs 25 Newtons on earth, which has more mass?

a. Object a
b. Object b
c. Same mass
d. Other

Answers

Answer:

a. Object A

Explanation:

The mass of an object implies the quantity of matter in it, while the weight is the amount of gravitational force applied on an object.

The object A has a mass of 25 lbs, but object B on the earth has a weight, W, of 25 N.

So that,

For object A on the moon, mass = 25 lbs

For object B on the earth, W = 25 N,

W = m x g

25 = m x 10                (g = 10 m/[tex]s^{2}[/tex])

m = [tex]\frac{25}{10}[/tex]

   = 2.5 lbs

Mass of object B is 2.5 lbs.

Therefore, the mass of the object A is more than that of B.

The rotational inertia of a thin rod about one end is 1/3 ML2. What is the rotational inertia of the same rod about a point located 0.40 L from the end

Answers

Answer:

The value is  [tex]I = 0.0932 ML ^2[/tex]  

Explanation:

From the question we are told that

  The rotational inertia about one end is [tex]I_R = \frac{1}{3} ML^2[/tex]

   The location of the axis of rotation considered is [tex]d = 0.4 L[/tex]

Generally the mass of the portion of the rod from the axis of rotation considered to the end of the rod is  [tex]0.4 M[/tex]

Generally the length of the rod from the its beginning to the axis of rotation consider is

      [tex]k = 1 - 0.4 L = 0.6L[/tex]

Generally the mass of the portion  of the rod from the its beginning to the axis of rotation consider is

    [tex]m = 1- 0.4 M = 0.6 M[/tex]

Generally the rotational inertia about the axis of rotation consider for the first portion of the rod is

     [tex]I_{R1} = \frac{1}{3} (0.6 M )(0.6L)^2[/tex]

    [tex]I_{R1} = \frac{1}{3} (0.6 M )L^2 0.6^2[/tex]

Generally the rotational inertia about the axis of rotation consider for the second  portion of the rod is

     [tex]I_{R2} = \frac{1}{3} (0.6 M )(0.6L)^2[/tex]

=> [tex]I_{R2} = \frac{1}{3} (0.4 M )(0.4L)^2[/tex]

=>  [tex]I_{R2} = \frac{1}{3} (0.4 M )L^2 0.4^2[/tex]

Generally by the principle of superposition that rotational inertia of the rod at the considered axis of rotation is

  [tex]I = \frac{1}{3} (0.6 M )L^2 0.6^2 + \frac{1}{3} (0.4 M )L^2 0.4^2[/tex]

=>   [tex]I = \frac{1}{3} ML ^2 [0.6 * (0.6)^2 + 0.4 * (0.4)^2 ][/tex]

=>   [tex]I = 0.0932 ML ^2[/tex]  

C4. A 50.0 kg boy runs at 10.0 m/s, jumps on a cart and rolls off at 2.50 m/s. What is the mass of the cart

Answers

Answer:

The mass of the cart is 150 kg.

Explanation:

Given that,

Mass of a boy, m₁ = 50 kg

Initial speed of boy, u₁ = 10 m/s

Initial speed of car, u₂ = 0 (at rest)

The speed of the cart with the boy on it is 2.50 m/s, V = 2.5 m/s

Let m₂ is the mass of the cart. Using the conservation of momentum as follows :

[tex]m_1u_1+m_2u_2=(m_1+m_2)V\\\\50(10)+m_2(0)=(50+m_2)(2.5)\\\\500=125+2.5m_2\\\\375=2.5m_2\\\\m_2=150\ kg[/tex]

So, the mass of the cart is 150 kg.

Ancient peoples both feared and revered Solar and Lunar Eclipses as they happened so rarely. Explain the following about eclipses:

1. Why are SOLAR eclipses more rare then lunar eclipses.

2. Explain what must occur for a SOLAR eclipse to occur.

3. Explain what must occur for a LUNAR eclipse to occur.

Answers

Answer:

Lunar and solar eclipses occur with about equal frequency. Lunar eclipses are more widely visible because Earth casts a much larger shadow on the Moon during a lunar eclipse than the Moon casts on Earth during a solar eclipse. As a result, you are more likely to see a lunar eclipse than a solar eclipse.

For a total eclipse to take place, the sun, moon and Earth must be in a direct line. The second type of solar eclipse is a partial solar eclipse. This happens when the sun, moon and Earth are not exactly lined up. The sun appears to have a dark shadow on only a small part of its surface.

For a lunar eclipse to occur, the Sun, Earth, and Moon must be roughly aligned in a line

A physicist's left eye is myopic (i.e., nearsighted). This eye can see clearly only out to a distance of 35 cm.Find the focal length and the power of a lens that will correct this myopia when worn 2.0 cm in front of the eye.

Answers

Answer:

Explanation:

To get the focal length, we will use the lens formula;

1/f = 1/u + 1/v

f is the focal length

u is the object distance

v is the image distance

Given

since the physicist's left eye is myopic, it will be corrected using concave lens and the image distance is negative.

u = 35cm

v = -2.0

1/f = 1/35-1/2

1/f = 2-35/70

1/f = -33/70

f = -70/33

f = -2.12 cm

f = -0.0212m

Power of a lend is the reciprocal of its focal length

Power of the lens = 1/f

P = 1/-0.0212

P = -47.17dioptres

The power of the lens is -47.17D

1.) There was an earthquake in Salt Lake City, Utah, on March 18, 2020, in the morning at  9 hours, 9 minutes, and 45 seconds Mountain Standard Time (9:9:45 MST).  If the velocity of the p-wave is 7.3 km/sec and the velocity of the s-wave is 5.1 km/sec and the s-p time lag is 16 seconds, what is the distance in kilometers from Salt Lake City to the focus of the earthquake?  Explain how you calculated the answer.


Answers

Answer:

7 because salt lake and Southis weat

Running with an initial velocity of 13 m/s , a horse has an average acceleration of -1.88 m/s2 . How long does it take for the horse to decrease its velocity to 6.3 m/s

pls :/

Answers

Answer:

3.56s

Explanation:

Ya that's the right answer.

what are the 3 main states of matter in water?/

Answers

Answer:

ice (solid), water (liquid) and vapor (gas)

Explanation:

Solid, liquid, and gas

which statement is true of the particles that make up a substance? a. particles in a liquid have more energy than particles in a gas. b. particles in a liquid and particles in a solid have the same amount of energy. c. particles in a gas have more energy than particles in liquid. d. particles in a solid have moe energy than particles in a gas.

Answers

Explanation:

so sorry

don't know but please mark me as brainliest please

A ball has a diameter of 3.77 cm and average density of 0.0839 g/cm3. What force is required to hold it completely submerged under water?

magnitude _________ N

Answers

The force required to hold it completely submerged under water is 0.252 N

As a result of the low density (ρ1 = 0.0839 g/cm3 = 83.9 kg/m3)of the ball compared to that of water (ρ2 =1000 kg/m3), the buoyant force that is acting on the ball is greater than its weight.

Therefore, the minimum force required to hold the ball submerged under water can be calculated using the relation

F = Buoyant force - weight of sphere

 

Radius = 3.77/2 cm = 0.0377/2 m = 0.01885 m

Volume of sphere = 4/3 π r³ = 4/3 * 3.142 * 0.01885³ = 2.805 e-5 m³

Mass of sphere = 4/3 π r³ ρ1 = 4/3 * 3.142 * 0.01885³ * 83.9 = 0.0023 kg

Weight of sphere = 4/3 π r³ ρ1 g = 4/3 * 3.142 * 0.01885³ * 83.9 * 9.8 = 0.023 N

 

Volume of water displaced = 4/3 π r³ = 2.805 e-5

Buoyant force = weight of water displaced = 4/3 π r³ ρ2 g = 4/3 π r³ = 4/3 * 3.142 * 0.01885³ * 1000 * 9.8 = 0.275 N

F = 0.275 - 0.023 = 0.252 N

read more here https://brainly.com/question/18103369

The force required to hold it completely submerged under water is 0.25 N

The density of the ball ([tex]\rho_b[/tex]) = 0.0839 g/cm³ = 83.9 kg/m³

The density of water [tex]\rho_w[/tex] = 1000 kg/m³

Diameter = 3.77 cm = 0.0377 m

radius of ball = 0.0377/2 = 0.01885 m

The volume (V) = [tex]\frac{4}{3} \pi r^3=\frac{4}{3}*\pi*0.01885^3=2.8*10^{-5}\ m^3[/tex]

Let us assume the acceleration due to gravity (g) = 9.8 m/s², Hence:

The force is required to hold it completely submerged under water (F) is:

[tex]F=\rho_w Vg-\rho_b Vg=1000*(2.8*10^{-5})*9.81-83.9*(2.8*10^{-5})*9.81\\\\[/tex]

F = 0.25 N

Find out more at: https://brainly.com/question/19054414

Two identical bowling balls are moving down a bowling alley so that their centers of mass have the same velocity, but one just slides down the alley, while the other rolls down the alley. Which ball has more energy?

a. Sliding ball
b. Rolling ball
c. They both have the same energy

Answers

Answer:

Rolling Ball

Explanation

Two identical bowling balls are moving down a bowling alley so that their centers of mass have the same velocity, but one just slides down the alley, while the other rolls down the alley, rolling ball has more energy.

what is velocity ?

Velocity can be referred to the rate of change of the position of the object with respect to time which is basically speeding the object in a specific direction.

Velocity is vector quantity, as it is present both magnitude  and direction  and The SI unit is meter per second (ms-1). The change in magnitude or the direction of velocity of a body, the object will accelerate.

the final velocity of the object is simple but few calculations and basic conceptual knowledge are needed.

For more details regarding velocity, visit

brainly.com/question/12109673

#SPJ2

How do you calculate the net force when there are multiple forces in different directions?​

Answers

To find [tex]F_{net}[/tex] we need to use vector addition and use the x and y components. First we subtract vector 2 from vector 5 which results in a vector with a  length of 3 pointing directly east, then we use the distance formula to find the length of the net force [tex]F_{net} = \sqrt{(3)^2+(4)^2} \\[/tex]  which gives [tex]F_{net} = 5[/tex]. We now have a magnitude but we also need a direction, since vector 4 and vector 5 are perpendicular. Using [tex]\theta = \tan^{-1} (\frac{4}{3})[/tex]   where tan^-1(y/x) we get an angle of 53 degrees. The resultant force vector is 5 distance with an angle of 53 degrees north east.

How many seconds did it take (after starting his descent) for the worker to hit the ground? Answer in units of s.

Answers

Answer:

This question is incomplete

Explanation:

The question is incomplete. However, to determine the time (in seconds) it took a worker to hit the ground from an elevated point. The speed the worker was coming with to the ground and the distance between the elevated point and the ground will have to be considered. Thus the formula to be used here will be

Speed (in meter per second) = distance (in meters) ÷ time (in seconds)

time (in seconds) = distance (in meters) ÷ speed (in meter per seconds)

A force F = (2xî + 4yĵ), where F is in newtons and x and y are in meters, acts on an object as the object moves in the x-direction from the origin to x = 4.99 m. Find the work W = ∫ F · dr done by the force on the object (in J).

Answers

Answer:

Work done, W = 24.9001 J

Explanation:

Given that,

Force, F = (2xî + 4yĵ) Where x and y are in meters

This force acts on an object as the object moves in the x-direction from the origin to x = 4.99 m.

We need to find the work done by the force on the object. It is given by :

[tex]W=\int\limits^a_b {F dr} \\\\W=\int\limits^{4.99}_0 {(2xi+4yj)dx} \\\\W=\int\limits^{4.99}_0 {2xi\ dx} \\\\W=x^2|_0^{4.99}\\\\\text{Applying limits}\\\\W=(4.99)^2-0^2\\\\W=24.9001\ J[/tex]

So, the work done is 24.9001 J.

Terell lives in Washington, D.C., where he can see the Potomac River from his bedroom window. When he sees this river, Terell thinks of swimming, boating, fun, and friends. What type of mental image is this?
A. analogical
B. symbolic
C. both analogical and symbolic
D. representative

Answers

Answer:

B. symbolic

Explanation:

The mental image formed in Terell's mind is a symbolic mental image.

A symbolic mental image helps to bring perception to imagery formed on the mind.

This process is symbolic because Terell can see that river ahead. If he cannot see the river then it is more of an analogical fantasy. The thoughts are predicated on the image of the River seen. Therefore, it is right to conclude that this is a symbolic mental image.

Answer:

Terell lives in Washington, D.C., where he can see the Potomac River from his bedroom window. When he sees this river, Terell thinks of swimming, boating, fun, and friends. What type of mental image is this?

symbolic

Explanation:

A 5-newton force directed east and a 5-newton force directed
north act concurrently on a point. Calculate the resultant of the two forces.

Answers

Answer:

[tex]5\sqrt{2} \ N[/tex]

Explanation:

It is given that,

A 5-newton force directed east and a 5-newton force directed  north.

We need to find the resultant of the two forces.

As the two forces are acting in perpendicular to each other. The resultant of two such forces is given by :

[tex]F=\sqrt{5^2+5^2} \\\\=5\sqrt{2} \ N[/tex]

So, the resulatnt force is [tex]5\sqrt{2} \ N[/tex]

А)
An automobile traveling along a straight road
increases its speed from 48 ft/s to 66 ft/s in
180 ft.
If the acceleration is constant, how much
time elapses while the auto moves the 180 ft?
Answer in units of s.

Answers

Answer:

4.5s

Explanation:

u=30m/s

v=50m/s

s=180m

a=constant(given)

By third equation of motion,    v  

2

=u  

2

+2as

(50)  

2

=(30)  

2

+2a(180)

a=  

3

40

​  

m/s  

2

 

By first equation of motion,    v=u+at

50=30+(  

9

40

​  

)t

t=  

2

9

​  

=4.5sec

Other Questions
A graduated cylinder has a radius of 1.0 45 cm and a height of 30.48 CM what is the volume of a cylinder in centimeters to the power of 3 PLEASE HELP ALGEBRA 2!!! The media include all forms of mass communication, including television, newspapers, magazines, and the Internet.Please select the best answer from the choices provided What is the slope of the line? which organization determines the legal requirements for a pharmacy technician to practice in the state of Virginia? Sam takes out a $167,000 mortgage for 20 years. He makes monthly payments and at the end calculates that he has paid $240,141 towards the mortgage. What is the approximate APR?3%4%6%7% I'm just here to say hi haha Jacob mixes cup of yellow paint for every cup of blue paint to make green paint. How many cups of yellow paint are needed for 1 cup of blue paint? The mountainous area was ______, which made the rescue teams exhausted.Which fits better, vast or tedious? Pls help! Im hesitating between c or d :The Protestant Reformation was made possible by: a) political conditions b) technological innovation c) theological teachings d) all of the above Find the zeros of the function.Enter the solutions from least to greatest.f(x) = (x - 5)(5x + 2)lesser x =greater x = help me solve this please! which statement best describes the role of the plasma membrane in osmosis?please help me Which of the following features was not necessary for adaptation by reptiles for life on land 14. el cociente de un nmero y noventa y cinco Kim got fired from her job; therefore, it is possible she will go through the stages of grief.A. TrueB. False PLEASE HELP MARKING BRAINLIEST ANSWER!!What is the rate of change of the line? 3x - 3y = 336x - 3y = 57help me please!!!:)) which of these is important part of any personal health plan for physcal fitness Help me!!! Please!!