Answer:
Increase/decrease indentation
Explanation:
Answer:
(Cellpadding) is actually the correct answer.
Explanation:
Cellpadding and cellspacing are two important features of an HTML table. Cellpadding sets the space around the data in each cell. Cellspacing sets the space around each cell in the table.
Overview
In this program, you will use incremental development to manipulate a list. Objectives Be able to:
Get a list of numbers Display the individual numbers of a list
Find the average and maximum of the numbers in a list Perform calculations on a number in a list Sort a list Description
Prompt the user for how many weights should be added to a list and get the weights (in pounds) from the user, one at a time.
Display the weights back to the user, along with the average and maximum weight.
Next, ask the user for a list location and convert the weight at that location to kilogra ms.
Next, display the sorted list. And finally, display the list of weights again, along with what the weights would be on Mars. One run of the full program is as follows:
Enter the number of weights: 4
Enter weight 1: 236.0
Enter weight 2: 89.5
Enter weight 3: 176.0
Enter weight 4: 166.3
Weights: [236.0, 89.5, 176.0, 166.3]
Average weight: 166.95
Max weight: 236.00
Enter a list location (1 - 4): 3
Weight in pounds: 176.00
Weight in kilograms: 80.00
Sorted list: [89.5, 166.3, 176.0, 236.0]
Weight on Earth: [89.5, 166.3, 176.0, 236.0]
Weight on Mars: [33.9, 62.9, 66.6, 89.3]
Think about how you would do this before you continue reading.
Come up with a very rough draft of how you would create this program.
Then see if it follows the same logic presented here.
If you do not know where to start, read the first step below and then try to construct the rest of the program on your own. Commonly, the hardest part of writing a program is knowing where to start. Try to begin without using the guide below. If you need more information on how to convert pounds to kilograms or how to convert the weight on earth to the weight on Mars, look at steps 4 and 6 below.
(1) Prompt the user for the number of weights and then prompt the user to enter the numbers, each corresponding to a person's weight in pounds. Store all weights in a list. Output the list. Ex: Enter the number of weights: 4 Enter weight 1: 236.0 Enter weight 2: 89.5 Enter weight 3: 176.0 Enter weight 4: 166.3 Weights: [236.0, 89.5, 176.0, 166.3]
(2) Output the average of the list's elements with two digits after the decimal point. Hint: Use a conversion specifier to output with a certain number of digits after the decimal point.
(3) Output the max list element with two digits after the decimal point. Ex: Enter the number of weights:
4 Enter weight 1: 236.0 Enter weight 2: 89.5 Enter weight 3: 176.0 Enter weight 4: 166.3 Weights: [236.0, 89.5, 176.0, 166.3] Average weight: 166.95 Max weight: 236.00
(4) Prompt the user for a number between 1 and the number of weights in the list. Output the weight at the user specified location and the corresponding value in kilograms. 1 kilogram is equal to 2.2 pounds. Ex: Enter a list location (1 - 4): 3 Weight in pounds: 176.00 Weight in kilograms: 80.00
(5) Sort the list's elements from least heavy to heaviest weight. Ex: Sorted list: [89.5, 166.3, 176.0, 236.0]
(6) Create another list for the weights on Mars. To compute weight on Mars, take the weight on Earth and divide by Earth's gravitational force, which is 9.81. Then multiply by the Mars gravitational force, which is 3.711. Use the built in Python function round() to round the Mars weights to 1 decimal point. Print out each set of weights as follows: Ex: If the sorted list of weights is [89.5, 166.3, 176.0, 236.0] Weight on Earth: [89.5, 166.3, 176.0, 236.0] Weight on Mars: [33.9, 62.9, 66.6, 89.3]
(7) Congratulate yourself on a job well done!
Answer:
The program in Python is as follows:
num_weight = int(input("Weights: "))
Weights = []
totalweight = 0
for i in range(num_weight):
w = float(input("Weight "+str(i+1)+": "))
Weights.append(w)
totalweight+=w
print("Weights: ",Weights)
print('Average Weight: %.2f' % (totalweight/num_weight))
print('Maximum Weight: %.2f' % max(Weights))
num = int(input("Enter a number between 1 and "+str(num_weight)+": "))
print('Weight in kg: %.2f' % Weights[i-1])
print('Weight in lb: %.2f' % (Weights[i-1]/2.205))
Weights.sort()
print("Sorted weights: ",Weights)
weight_on_mars = []
for i in range(num_weight):
weight_on_mars.append(round((Weights[i]/9.81 * 3.711),1))
print("Weights on mars: ",weight_on_mars)
print("Congratulations")
Explanation:
This gets the number of weights
num_weight = int(input("Weights: "))
This initializes the weights
Weights = []
This initializes the total weight to 0
totalweight = 0
The iterates through the number of weights
for i in range(num_weight):
This gets each weight
w = float(input("Weight "+str(i+1)+": "))
This appends the weight to the list
Weights.append(w)
This calculates the total weights
totalweight+=w
This prints all weights
print("Weights: ",Weights)
Calculate and print average weights to 2 decimal places
print('Average Weight: %.2f' % (totalweight/num_weight))
Calculate and print maximum weights to 2 decimal places
print('Maximum Weight: %.2f' % max(Weights))
Prompt the user for input between 1 and the number of weights
num = int(input("Enter a number between 1 and "+str(num_weight)+": "))
Print the weight at that location in kg and lb
print('Weight in kg: %.2f' % Weights[i-1])
print('Weight in lb: %.2f' % (Weights[i-1]/2.205))
Sort weights and print the sorted weights
Weights.sort()
print("Sorted weights: ",Weights)
Create a new list for weights on mars
weight_on_mars = []
The following populates the list for weights on mars
for i in range(num_weight):
weight_on_mars.append(round((Weights[i]/9.81 * 3.711),1))
Print the populated list
print("Weights on mars: ",weight_on_mars)
print("Congratulations")
A candle shop is having its annual sale. votive candles cost $10 each. Any additional candles he purchased were 25% off. if dahir purchased 7 candles, how much money in dollars , did he spend.
Answer:
55 dollars
Explanation:
25 % of 10 is 2.50 $10-2.50=7.50 7.50 X 6= 45.
45 + 10 = 55.
Hope this helps and everything is well,
Azumayay
What is an interface in android? a) Interface acts as a bridge between class and the outside world.
b) Interface is a class. c) Interface is a layout file. d) None of the above
Answer:
Explanation:
Im thinking C hope this helps :))
The interface in an android serves as a layout file.
What is an User interface?An User interface also called a UI, is an in-built system that serves as a hierarchy of layouts and widgets.
Thus, the interface in an android serves as a layout file.
Therefore, the Option C is correct
Read more about interface
brainly.com/question/5080206
5. A restore program generally is included with what type of utility?
O A. Screen saver
O B. Antivirus
O C. Uninstaller
D. Backup
6. The interface that allows interaction with menus, and visual images such as
buttons:
A. Touchscreen user interface
O B. Menu driven Interface
O C. Graphical user interface
O D. Command line interface
Please help i’ll give you brainliest Please please
Hey
when we use quotation marks in a search it means we are looking for a phrase so lets say we want to find cats jumping off a bed we can either look up cats jumping off a bed with no quotation marks and the algorithm will try to look for keywords in the search so cat bed and jumping (it ignores words like a and off) but the way it doses all this we will most likely find an image of a cat on a bed or jumping on a bed but we may not find one of the cat jumping off a bed. so this is where quotation marks come in they will make the algorithm look just for images and links tagged with "cat jumping off a bed"
the plus sign is when we want to add things to the search so we would use the plus sign if we wanted to find a cat that was on a bed and jumping it would be like this cat+bed+jumping
the pipe symbol is used when we are looking for two things that are basically the same but with one key difference so lets say we wanted cats jumping on a bed or dogs jumping on a bed we would use it then
and the words or and not can not be used in a search engine as the algorithm can not tell if they are being used as a tag.
-scav
Type the correct answer in the box. Spell all words correctly.
What type of network has cache servers that are connected to the original server?
A(n) ________ delivery network consists of cache servers that are connected to the original server.
Answer:
A Content Delivery Network (CDN) consists of cache servers that are connected to the original server.
Which of the following items are both an input and output device?
Answer:
Printer (output) Camera (input), and others
Explanation:
Question 20
When looking to create video content for your marketing strategy, what three best practices
should you look to include?
Answer:
Short, technical, include a call to action.
Relevant, short, entertaining.
Short, entertaining, include a call to action.
Explanation:
Which options are available when using a combo box rather than a list box? Check all that apply. A user can type in the values. A user can search for a record. The combo box can sort through records. A user can get values from another query. The combo box includes drop-down menus. A user can retrieve values from another table.
Answer:
A, B, D, F
Explanation:
Apply the Blue, Accent 1 fill color to the selected shape, is the filth option in the first row under Theme Cross, in power point
Treat others the way
a
Like they are your enemy
b
That is all the same
c
You want to be treated
d
The same as you treat your friend
Answer:
C.
Explanation:
But shi.it i dont treat ppl good when they disrespecting me or my friends i be putting them in hush mode.
C++
Is there any difference between Class and Structure? Prove with the help of example.
Answer:
5555
Explanation:
