The conclusion that is consistent with the ionic equation would be that COS (s) is a precipitate.
What is a precipitation reaction?It is a reaction in which 2 soluble salts in aqueous forms react to produce an insoluble salt as one of the reaction's products.
Precipitate products are usually insoluble and can be filtered off using suitable filter paper. In other words, they are solids that are suspended in solution.
Following the ionic reaction, the two reacting ions are in aqueous forms while the product formed is solid.
More on precipitation reactions can be found here: https://brainly.com/question/24158764
#SPJ1
A container with a volume 2.0 L is filled with a gas at a pressure of 1.5 atm. By decreasing the volume of the container to 1.0 L, what is the resulting pressure? Type in your answer using the correct number of significant figures. Remember to use the formula for Boyle's law: P1V1 = P2V2
After reducing the starting volume, the gas has a resultant pressure of 3 atm.
Describe Boyle's Law.
Boyle's Law states that a gas's pressure is inversely proportionate to its volume at constant temperature:
P ∝ 1/V
The necessary equation for the posed question is:
P1V1 = P2V2, and
Initial pressure is P1 and is 1.5 atm.
Initial volume = 2 L for V1.
final pressure = P2 =?
Final volume = 1 L, or V2.
Using the aforementioned equation and all of these data, we obtain
P₂ = [tex]\frac{(1.5x2)}{1}[/tex]= 3atm
Therefore, 3 atm of pressure is needed.
Learn more about Boyle's law here https://brainly.com/question/19491032
#SPJ10
what is chica's email
how are we (brainly users) supposed to know. unless its just me that doesn't know.
sorry that this isn't really much help. :/
Select the correct answer from each drop-down menu. Complete the sentences to explain what’s happening at different portions of the heating curve. Particles of the substance have the most kinetic energy when the substance is . The part of the graph that represents where the substance has the least amount of potential energy is labeled
In the given heating curve, Particles of the substance have the most kinetic energy when the substance is (a) 1. A gas. The part of the graph that represents where the substance has the least amount of potential energy is labeled (b) 1. Solid.
What is Heating curve ?The heating curve is the relationship between the heating system supply temperature and the outside air temperature.
Gas molecules have the highest average velocities among the three states of matter so gas has the highest kinetic energy.
During freezing, a substance loses a lot of potential energy so solid has the least potential energy.
Hence, In the given heating curve, Particles of the substance have the most kinetic energy when the substance is (a) 1. A gas.
The part of the graph that represents where the substance has the least amount of potential energy is labeled (b) 1. Solid.
Learn more about Kinetic energy here ;
https://brainly.com/question/12669551
#SPJ1
Which of the following questions would be answered by performing a scientific experiment?
A.
What type of food is the most enjoyable?
B.
What type of food is the most nutritious?
C.
What type of food looks the best?
How many liters of a 0.80 M
solution can be made with 2.0 mol
KNO3?
{?} L
Answer:
Explanation:
Solution
Verified by Toppr
2 molL
−1
Explanation :
Concentration =
Volume of solution
Moles of solute
We assume that potassium nitrate dissolves in the given volume of solvent without gross change in volume.
Concentration =
101.10gmol
−1
404g
10.5 mL of an unknown solution are diluted to 80.0 mL. The concentration of the
new solution was determined to be 0.172 M. What was the molarity of the
unknown solution? (Report your answer to two places past the decimal point.
Moodle is looking for a number only, no units.)
The molarity of the unknown solution will be 1.310 M.It is denoted by M₂.
What is molarity?Molarity is defined as the ratio of the moles to the volume of the solution.
Given data;
Volume of unknown solution,V₁ = 10.5 mL
The volume of diluted solution,V₂ = 80.0 mL
Molarity of new solution,M₁ = 0.172 M
Molarity of unknown solution, M₂=?
For dilution we use the formula as;
M₁V₁=M₂V₂
M₂=M₂V₂/V₁
M₂ = ( 80 × 0.172 ) / 10.5
M₂= 1.310 M
Hence the molarity of the unknown solution will be 1.310 M.
To learn more about molarity refer;
https://brainly.com/question/2817451
#SPJ1
When you have added as much solute as can dissolve in solvent the solution is called
Solubility limit. that's the answer
What is a quantum of light energy called?
O A. A photon
OB. A frequency
O C. A proton
O D. An electron
Answer:
A) photon
Explanation:
hope it helps and give brainliest if its correct
Answer:
PhotonExplanation:
please mark brainliest pleaseThe empirical formula for a compound shows the symbols of the elements with subscripts indicating the
Select one:
A) actual numbers of atoms in a molecule.
B)numbers of moles of the compound in 100 grams.
C)smallest whole-number ratio of atoms.
D) atomic masses of each element
Answer:
smallest whole number ratios of atoms
6.0 mol NaOH reacts with
9.0 mol H3PO4 according to
the equation below:
3NaOH + H3PO4 → 3H₂O + Na3PO4
How many moles of Na3PO4 form from
6.0 mol NaOH?
[?] mol Na3PO4
Round your answer to the tenths place.
2 moles of Na3PO4 form from 6.0 mol NaOH. Details about stoichiometry can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated stoichiometrically as follows:
3NaOH + H3PO4 → 3H₂O + Na3PO4
According to this equation,
3 moles of NaOH produces 1 mole of Na3PO4
This means that 6 moles of NaOH will produce 6/3 = 2 moles of Na3PO4
Therefore, 2 moles of Na3PO4 form from 6.0 mol NaOH.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
How many grams of water are
produced from the complete
reaction of 12.25 moles
hydrogen, H2?
CO + 3H₂ → H₂O + CH4
[?] g H₂O
The weight of water produced from the complete reaction of 12.25 moles of Hydrogen is 73.5 g water
What is hydrogen gas used for?Hydrogen can be used in fuel cells to generate electricity, or power and heat.
Today, hydrogen is most commonly used in petroleum refining and fertilizer production, while transportation and utilities are emerging markets.
As according to given chemical equation,
3 moles of H₂ produces 1 mole (18 g) of water
Therefore,
The weight of water produced by 12.25 mole of hyrdogen will be ;
= 18 / 3 x 12.25 = 73.5 g water
Hence , The weight of water produced from the complete reaction of 12.25 moles of Hydrogen is 73.5 g water
Learn more about Hydrogen gas here ;
https://brainly.com/question/12494649
#SPJ1
Oxygen forms a number of compounds with sulfur, many of which are quite reactive. One such compound is 57.20 % by mass S . Calculate the number of grams of oxygen present in a sample of this compound that contains 40.00 grams of S . g O
The number of grams of oxygen present in a sample of this compound that contains 40.00 grams of S = 29.9g of oxygen
Calculation of quantity of OxygenThe compound contains the following:
sulphur = 57.20%
Oxygen= 100 - 57.20 = 42.80%
If 57.20% of the sample contains 40g of sulphur then 42.80% of the sample will contain X.
Make X the subject of formula,
X = 42.8 × 40/57.20
X= 1712/57.20
X= 29.9g of oxygen
Learn more about chemical compound here:
https://brainly.com/question/26487468
#SPJ1
How many liters of a 4M solution can be made using 100 grams of LiBr?
Answer:
volume = 0.288 L
Explanation:
To find the volume, you need to (1) convert grams LiBr to moles LiBr (via molar mass) and then (2) calculate volume (via molarity equation). It is important to arrange the ratios in a way tat allows for the cancellation of units (desired units in the numerator).
(Step 1)
Molar Mass (LiBr): 6.9410 g/mol + 79.904 g/mol
Molar Mass (LiBr): 86.845 g/mol
100 grams LiBr 1 mole
----------------------- x ------------------ = 1.15 moles LiBr
86.845 g
(Step 2)
Molarity (M) = moles / volume (L)
4 M = 1.15 moles / volume
(4 M) x volume = 1.15 moles
volume = 1.15 moles / 4 M
volume = 0.288 L
Lucite contains 59.9 g C, 8.06 g H,
and 32.0 g O. You want to
determine the empirical formula.
How many moles of H are in the
sample?
{?} mol H
Answer:
8.00
Explanation:
I hope the spurs get wembanyama so bad
You might also want to challenge other commonly accepted green ideas or the impact of the various green activities . For example , what is the relative impact of these green measures ? What mass of carbon do these various common activities use up ?
1. Washing clothes at 300 degrees instead of 400 .
2. Shutting your computer down every night .
3. Using low - energy light bulbs instead of regular light bulbs ..
4. Switching off television instead of leaving it on standby .
5. Boiling only 1 cup of water at a time , instead of a whole kettle .
2)A complete desktop uses an average of 200 Watt hours (Wh). This is the sum of the average consumption per hour of the computer itself (171 W), the internet modem (10 W), the printer (5 W) and the loudspeakers (20 W). Assuming that a computer is on for eight hours a day, the annual consumption comes to 600 kWh. That corresponds to CO2 emissions of about 175 kg per year, i.e. 1.75 % of the average annual emission of a Belgian.
Substances are classified as acidic, basic, or neutral. The pH scale can be used to classify a substance. Which feature suggests that a substance is basic?
a. The pH is greater than 7.
b. The pH is 0.
c. The pH is 7.
d. The pH is less than 7.
Answer:
a
Explanation:
from pH of 0-6 is acidic and 7 is neutral above 7 is basic or alkali
14- Which statements about acids and bases are correct? (1 mark) 1- An acid reacts with a metal to give off hydrogen. 2- A base reacts with an ammonium salt to give off ammonia. 3-An acid reacts with a carbonate to give off carbon dioxide. 4- Alkaline solutions are orange in methyl orange.
A) 1, 2 and 3
B) 1, 2 and 4
C) 1, 3 and 4
D) 2, 3 and 4
Answer:
a)
Explanation:
4th is incorrect.
Alkaline solutions are yellow in methyl orange.
Which statements about acids and bases are correct ?
A) 1, 2 and 3<3
what mass of aluminium is required to produce 500g of aluminium chloride?
2Al + 3Cl₂ --> 2AlCl₃
Answer:
101.18 grams
Explanation:
From the equation you can see that the same number of MOLES will be required as MOLES of aluminum chloride produced.
Mole weight of aluminum chloride = 26.981 + 3 * 35.45 = 133.331 gm
500 gms of this is then 500 / 133.331 = 3.75 moles
So you need 3.75 moles of aluminum
3.75 moles * 26.981 g/mole = 101.18 grams of Al
101.07 grams of aluminum (Al) are required to produce 500 grams of aluminum chloride (AlCl₃) according to the given chemical equation.
Mass is a fundamental physical property of matter that represents the amount of substance contained in an object. It is a measure of the total amount of matter or material in an object, and it is typically measured in units such as grams (g) or kilograms (kg).
Molar mass, also known as molecular mass or formula mass, is the mass of one mole of a chemical substance. It is usually expressed in grams per mole (g/mol). Molar mass is a fundamental concept in chemistry that allows scientists to relate the mass of a substance to the number of moles it contains.
The balanced chemical equation is:
2Al + 3Cl₂ → 2AlCl₃
From the balanced equation, 2 moles of aluminum (Al) react with 3 moles of chlorine gas (Cl₂) to produce 2 moles of aluminum chloride (AlCl₃).
Molar mass of Al = 26.98 g/mol
Molar mass of Cl = 35.45 g/mol
Molar mass of AlCl₃ = 2 × (26.98 g/mol) + 3 × (35.45 g/mol)
= 133.34 g/mol
moles of AlCl₃ = mass / molar mass
moles of AlCl₃ = 500 g / 133.34 g/mol
= 3.749 moles
In the reaction, 2 moles of Al react to produce 2 moles of AlCl₃.
Therefore, moles of Al = moles of AlCl₃
moles of Al = 3.749 moles
Step 4: Calculate the mass of Al required:
mass of Al = moles of Al × molar mass of Al
mass of Al = 3.749 moles × 26.98 g/mol
= 101.07 g
Learn more about Mass, here:
https://brainly.com/question/11954533
#SPJ3
Use the following scenario to calculate the carbon flux in the atmosphere. The amount of carbon that enters the atmosphere through natural processes is 211.6 GtC/yr and the amount that leaves the atmosphere through natural processes in 213.8 GtC/yr. The amount of carbon released by burning fossil fuels is 5.5 GtC/yr. What is the carbon flux in the atmosphere
The amount of carbon flux in the atmosphere will be 3.3 GtC/yr
Carbon flux calculationThe carbon flux in the atmosphere can be calculated by:
1. Removing the amount of carbon that leaves the atmosphere from the amount that enters the atmosphere.
2. Adding the amount of carbon released by fossil fuel burning.
Thus,
Carbon flux = 211.6 - 213.8 + 5.5 = 3.3 GtC/yr
More on carbon flux can be found here: https://brainly.com/question/15857288
#SPJ12
calculate mole fraction of benzene (70 g) having 30 gram of mass of carbon tetrahedral
Moles of benzene
70/90=7/9=0.8molmoles of CCl_4
30/1540.2molNow
[tex]\\ \rm\Rrightarrow \chi_{C_6H_6}[/tex]
[tex]\\ \rm\Rrightarrow \dfrac{\chi_{C_6H_6}}{\chi_{sol^n}}[/tex]
[tex]\\ \rm\Rrightarrow \dfrac{0.8}{0.8+0.2}[/tex]
[tex]\\ \rm\Rrightarrow \dfrac{0.8}{1}[/tex]
[tex]\\ \rm\Rrightarrow 0.8[/tex]
How does nuclear fission occur?
A) Protons gather in the nucleus of Uranium atoms and cause the nucleus to explode and release energy in the form of heat.
B) Neutrons smash into the nucleus of Uranium atoms. The neutrons are then split in half and release the energy in the form of heat .
The theoretical yield of NaBr from
2.36 mol FeBr3 is 7.08 mol NaBr.
What is the percent yield if 6.14 mol
NaBr were collected?
[?]%
the percent yield of the reaction is 100%.
The percent yield is calculated as the experimental yield divided by the theoretical yield x 100%:
% yield = actual yield / theoretical yield * 100%
% yield of a reaction in this case Rate
In this case, the molar mass of NaBr is 102.9 g / mol, as you know:
444 actual yield = 7.08 mol x 102.9 g / mol = 728.532 g
theoretical yield = 7.08 mol x 102.9 g / mol = 728.532 g
, Replaced by the definition of percent yield:
percent yield = 728.532 grams / 728.532 grams * 100%
percent yield = 100%
Finally, the percent yield of the reaction is 100%.
FeBr3 is iron bromide. Also known as iron bromide. Iron bromide is an ionic compound in which iron is in a +3 oxidation state.
Learn more about % yield here:https://brainly.com/question/27979178
#SPJ10
Answer: 87%
Explanation:
How do we investigate translocation using tracers?
Translocation can be investigated by using radioactively labelled tracers, which are absorbed into glucose during photosynthesis.
What is translocation?Translocation can be defined as a biological process which involves the transfer (movement) of water and other soluble nutrients from one part of a plant to another, especially through the xylem and phloem.
Generally, translocation can be investigated by using radioactively labelled tracers, which are absorbed into glucose during photosynthesis. Also, an x-ray turns black when exposed to this biological process in plants.
Read more on translocation here: https://brainly.com/question/14464141
#SPJ12
PLEASE HURRY!! WORTH 50 POINTS!
A mixture of three noble gases has a total pressure of 1.25 atm. The individual pressures exerted by neon and argon are 0.68 atm and 0.35 atm, respectively. What is the partial pressure of the third gas, helium?
0.22 atm
0.33 atm
1.03 atm
2.28 atm
Answer:
P total = 1.25 atm
neon = 0.68 atm
argon= 0.35 atm
helium= x
1.25=0.68+0.35+x
1.25-0.68-0.35=x
x=0.22 atm
Nitrogen monoxide (NO) is a pollutant known to
destroy the ozone layer. Nitrogen monoxide reacts
with ozone molecules (0,) to release oxygen and
a nitrogen-containing compound Q. Given that one
molecule of nitrogen monoxide reacts with one
molecule of ozone to produce one molecule of
of Q.
oxygen and one molecule of Q, identify the formula.
Answer:
See below
Explanation:
NO + O3 ====> NO2 + O2 (ozone is O3)
why can't amylase digest other substances?
Explanation:
saliva contains and amylase which randomly hydrogen all the one is equal to 4 glycosidic bonds of stars except it's out most bones and those next the branches on the hand glycogen being a highly branched molecule it is evident that amylase won't be a good animal eyes to digest it due to physical structure constance
A 25.0 g sample of metal at
16.0 °C is warmed to 22.1 °C
by 259 J of energy.
What is the change in temperature
for the metal?
The answer to this question is change in temperature will be 6.1 and specific specific heat capacity of metal will be 1698.36.
According to the formula of Calorimetry
Q = msΔT
where, Q = Quantity of heat absorbed (in joules)
M = Mass of water sample given (in kilogram)
S = specific heat capacity of metal
ΔT = Change in temperature
We have given,
Mass as 25 gram which is equal to 0.025 Kg.
Change in temperature as 6.1
Quantity of heat absorbed as 259 J
Applying to the formula of Calorimetry
Q = msΔT
259 = 0.025 × s × 6.1
s = 1698.36
So, specific heat capacity of metal came out to be 1698.36 and the change in temperature will be 6.1
Learn more about Calorimetry here:
https://brainly.com/question/1407669
#SPJ10
Answer: specific heat is 1.7
Explanation:
after you answer this question itll then tell you to find the specific heat
Which statement is true for most chemical reactions?
O An energy change occurs during the breaking and forming of bonds.
O The internal energy of the system increases during a reaction.
O Energy is released during the formation of reactants.
O The enthalpy of the products is higher than the enthalpy of the reactants
Answer:
An energy change occurs during the breaking and forming of bonds.
Explanation:
Answer:
An energy change occurs during the breaking and forming of bonds.
Explanation:
Energy changes occur when bonds are broken or formed.
When a bond is formed, energy is released.
When a bond is broken, energy is stored.
Edge 2022
Thermochemical Reactions Quiz answer
n
What is an isotope?
What kind of exercise does not require the use of oxygen to metabolize energy? strength aerobic stretching anaerobic
Answer:
See Below
Explanation:
'an aerobic ' means it does not use oxygen
Answer:
anaerobic
Explanation:
