when traveling at 55mph, how many feet do you need to stop?approximately 302 feetapproximately 303 feetapproximately 304 feetapproximately 305 feet

Answers

Answer 1

When calculating the stopping distance, various factors come into play, including reaction time, road conditions, vehicle weight, and braking efficiency. However, a commonly used estimate for the stopping distance at 55 mph (miles per hour) is approximately 4 to 5 times the thinking distance, which is the distance traveled during the driver's reaction time.

Assuming an average reaction time of 1.5 seconds, the thinking distance can be estimated by considering the speed:

Thinking Distance = Speed × Reaction Time

Converting 55 mph to feet per second (fps):

55 mph = 55 × 1.46667 fps (1 mph ≈ 1.46667 fps)

Now, calculating the thinking distance:

Thinking Distance = 55 × 1.46667 × 1.5 = 120.9335 feet (approximately)

Adding this thinking distance to the braking distance, we can estimate the overall stopping distance.

Therefore, the approximate stopping distance at 55 mph would be:

Stopping Distance ≈ Thinking Distance + Braking Distance

Stopping Distance ≈ 120.9335 feet + Braking Distance

Based on the options provided, none of them align with this approximate estimation. However, the closest option is:

Approximately 305 feet.

To know more about stopping distance refer here

https://brainly.com/question/28542251#

#SPJ11


Related Questions

according to the laws of thermal radiation, hotter objects emit photons with group of answer choices a lower average energy. a lower average frequency. a shorter average wavelength. a higher average speed.

Answers

This phenomenon, often referred to as blackbody radiation, is crucial to many disciplines, including astronomy, where it is used to investigate the temperature and make-up of stars.

According to the laws of thermal radiation, hotter objects emit photons with a shorter average wavelength. This is because the energy of a photon is directly proportional to its frequency, and inversely proportional to its wavelength. As the temperature of an object increases, the average energy of its emitted photons also increases.

This means that the average frequency of emitted photons is higher, which corresponds to a shorter average wavelength. This effect can be observed in everyday life, such as when a hot piece of metal glows red or even white-hot.

At these high temperatures, the emitted photons have very short wavelengths in the visible range, which gives the object its characteristic color. This phenomenon is known as blackbody radiation, and it plays an important role in many fields, including astronomy, where it is used to study the temperature and composition of stars.

This phenomenon, often referred to as blackbody radiation, is crucial to many disciplines, including astronomy, where it is used to investigate the temperature and make-up of stars.

To learn more about : phenomenon

https://brainly.com/question/24431608

#SPJ11

You look up and see a helicopter pass directly overhead. 3. 10s later you hear the


sound of the engine. If the air temperature is 23. 0°C, how high was the helicopter


flying?

Answers

The helicopter was flying at an approximate height of 1070.13 meters.

To determine the height at which the helicopter was flying, we can use the speed of sound and the time delay between seeing the helicopter and hearing the sound.

The speed of sound in air depends on the temperature of the air. The relationship between the speed of sound (v) and the air temperature (T) can be approximated by the equation:

v = 331.5 m/s + 0.6 m/s/°C * T

Given:

Time delay between seeing the helicopter and hearing the sound = 3.10 s

Air temperature = 23.0°C

First, let's calculate the speed of sound at the given air temperature:

v = 331.5 m/s + 0.6 m/s/°C * T

v = 331.5 m/s + 0.6 m/s/°C * 23.0°C

v ≈ 331.5 m/s + 13.8 m/s

v ≈ 345.3 m/s

Next, we can calculate the distance traveled by the sound in the time delay:

Distance = Speed × Time

Distance = 345.3 m/s × 3.10 s

Distance ≈ 1070.13 m

Since the sound traveled from the helicopter to your location, the distance is equal to the height at which the helicopter was flying.

To know more about height refer here

https://brainly.com/question/29131380#

#SPJ11

one person pulls on a rope with a force of 400 n to the right. another person pulls on the opposite end with a force of 600 n to the left. what is the unbalanced net force?

Answers

The unbalanced net force acting on the rope is 200 N to the left. This means that the rope will move in the direction of the net force, which is to the left.

The unbalanced net force is the overall force acting on the object after considering all the forces acting on it.

In this case, one person is pulling on a rope with a force of 400 N to the right and the other person is pulling on the opposite end with a force of 600 N to the left.

To determine the net force, we need to subtract the force acting in the opposite direction from the force acting in the forward direction.

Since the forces are in opposite directions, we need to subtract the smaller force from the larger force:

Net force = 600 N - 400 N = 200 N to the left

To know more about net force refer here

https://brainly.com/question/29261584#

#SPJ11

You put a force of 550

n in an area of 9 cm² on the tops of my feet! the pressure on

my feet was 611111 pa. what is the ratio of this pressure to

atmospheric pressure?

Answers

The ratio of the pressure on your feet to atmospheric pressure is 6.03. To calculate the ratio of the pressure on your feet to atmospheric pressure, we need to first determine the atmospheric pressure at the time of the force being applied. The standard atmospheric pressure at sea level is approximately 101,325 Pa. However, atmospheric pressure can vary based on factors such as altitude and weather conditions. For the purpose of this calculation, we will assume the atmospheric pressure is at the standard value of 101,325 Pa.

Now, let's use the given information to calculate the ratio of the pressure on your feet to atmospheric pressure. We know that the force applied was 550 N and the area on which it was applied was 9 cm². To convert this area to m², we need to divide by 10,000, which gives us 0.0009 m².

Using the formula pressure = force/area, we can calculate the pressure on your feet to be:

pressure = 550 N / 0.0009 m² = 611,111 Pa

Now, to calculate the ratio of this pressure to atmospheric pressure, we simply divide the pressure on your feet by atmospheric pressure:

ratio = 611,111 Pa / 101,325 Pa = 6.03

Therefore, the ratio of the pressure on your feet to atmospheric pressure is 6.03. This means that the pressure on your feet was over 6 times greater than the standard atmospheric pressure at sea level. This level of pressure can be quite significant and may cause discomfort or even injury if sustained for an extended period. It is important to ensure that any activities that involve applying pressure to the feet are performed safely and with appropriate support.

Know more about atmospheric pressure here:

https://brainly.com/question/13407492

#SPJ11

For the next three questions: A bungee jumper of mass m stands on a platform of height h over a canyon attached to a bungee cord with un-stretched length L and spring constant k.19) Determine the energies and use energy bar charts to illustrate them at the positions a, b, and c (see the figure), as the jumper goes through from the time he starts to jump until the time he stops (at the end of the stretched bungee cord). 20) Determine the energy transfers from position a to b and b to c. 21) Write the energy conservation equation from the start of the jump to the stopping point, which will allow you to find the stretched length AL of the bungee cord. 22) Solve the equation for the stretched length (no numbers, just the variables).

Answers

A bungee jumper is a person who jumps off a platform or a tall structure while attached to a bungee cord. The un-stretched length of the bungee cord refers to its length when it is not stretched or extended. Energy transfers refer to the transfer of energy from one form to another, such as from potential energy to kinetic energy or vice versa.


19) When the bungee jumper starts to jump, he has potential energy due to his position above the ground. As he jumps, this potential energy is converted into kinetic energy, which is the energy of motion. At position a, the jumper has all potential energy and no kinetic energy. At position b, he has some potential energy and some kinetic energy. At position c, he has no potential energy and all kinetic energy. The energy bar charts would show the amount of potential and kinetic energy at each position.

20) The energy transfer from position a to b is the transfer of potential energy to kinetic energy. The energy transfer from position b to c is the transfer of kinetic energy back to potential energy as the bungee cord stretches and slows the jumper down.

21) The energy conservation equation is: Potential energy at start = Kinetic energy at stopping point + Potential energy stored in the stretched bungee cord. This equation takes into account that the potential energy is converted into kinetic energy during the jump, and then back into potential energy as the bungee cord stretches and slows the jumper down.

22) Solving for the stretched length AL of the bungee cord would involve using the equation for the potential energy of the bungee cord, which is given by: Potential energy = (1/2)k(AL-L)^2. We would need to use the energy conservation equation to find the total potential energy at the stopping point and then equate it to the potential energy of the bungee cord. We would then solve for AL, the stretched length of the bungee cord.

Learn more about potential energy here:-

https://brainly.com/question/24284560

#SPJ4

Use the internet or consult your senior in your locality to search for the scope of different branches of science.based on your findings prepare a presentation or report on the scope of science

Answers


There are many different branches of science, each with its own unique scope and focus. Some of the major branches of science include:

1. Physics: The study of matter and energy, and the interactions between them. This includes the study of mechanics, thermodynamics, electromagnetism, and quantum mechanics.

2. Chemistry: The study of matter and its properties, including the composition, structure, properties, and reactions of substances. This includes organic chemistry, inorganic chemistry, and physical chemistry.

3. Biology: The study of living organisms and their interactions with each other and the environment. This includes the study of genetics, evolution, ecology, and biochemistry.

4. Earth Science: The study of the physical and chemical properties of the Earth, including geology, meteorology, and oceanography.

5. Astronomy: The study of the universe and its contents, including planets, stars, galaxies, and other celestial bodies.

6. Computer Science: The study of computation and information processing, including software engineering, artificial intelligence, and computer graphics.

The scope of each branch of science is vast and constantly evolving with new discoveries and advancements. The study of science can lead to a wide range of careers, including research and development, healthcare, engineering, and education, among others. Science also plays an important role in addressing global challenges such as climate change, disease prevention, and sustainable development. Overall, the scope of science is vast and diverse, and offers many opportunities for learning, discovery, and innovation.

Anna mixes 200 g of hot coffee at 90 oC with 50 g of cold water at 3 oC to bring down the

temperature of the coffee. Explain what happens to the mixture using kinetic molecular model.

Answers

Mixing hot coffee with cold water results in heat transfer from the coffee to the water through conduction until they reach thermal equilibrium. This process is explained by the kinetic molecular model and the laws of thermodynamics.

When Anna mixes hot coffee with cold water, the coffee loses heat to the surroundings and the water gains heat. The kinetic molecular model explains that heat is the energy that molecules possess and is transferred when there is a temperature difference between two objects.

In this case, the coffee molecules at a higher temperature have more kinetic energy than the water molecules at a lower temperature. As the coffee and water are mixed, the faster-moving coffee molecules collide with the slower-moving water molecules, transferring some of their kinetic energy to them.

This results in the coffee losing heat and the water gaining heat, until they reach thermal equilibrium at a new temperature between the initial temperatures of the two substances.

The process of mixing coffee with cold water is an example of heat transfer through conduction. The heat flows from the hot coffee to the cold water until the two substances reach a common temperature.

This process is governed by the laws of thermodynamics, which state that heat flows from hotter objects to cooler objects until thermal equilibrium is achieved.

To know more about equilibrium refer here:

https://brainly.com/question/31315279#

#SPJ11

An archer shot a 0. 04 kg arrow at a target. The arrow accelerated at 7,000 m/s2 to reach a speed of 60. 0 m/s as it left the bow. How much force did the arrow have? ___N

Answers

The force exerted on the 0.04 kg arrow, which accelerated at 7,000 m/s² to reach a speed of 60.0 m/s, is 280 N.

To calculate the force exerted on the arrow, we can use Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration (F = m*a). In this case, the mass of the arrow (m) is 0.04 kg, and its acceleration (a) is 7,000 m/s².

Step 1: Identify the mass (m) and acceleration (a) of the arrow.
m = 0.04 kg
a = 7,000 m/s²

Step 2: Apply Newton's second law of motion (F = m*a) to calculate the force (F).
F = 0.04 kg * 7,000 m/s²

Step 3: Multiply the mass and acceleration values to obtain the force.
F = 280 N

Therefore, the force exerted on the arrow is 280 Newtons.

Know more about Newton's second law of motion click here:

https://brainly.com/question/27712854

#SPJ11

Calculate the intensity transmission coefficient TI and reflection coefficient RI for the following interfaces: muscle/kidney, air/ muscle, bone/ muscle. assuming that the ultrasound incidence beam makes angle of 30 degree

Answers

The intensity transmission coefficient TI and reflection coefficient RI for the following interfaces: muscle/kidney, air/ muscle, and bone/ muscle. assuming that the ultrasound incidence beam makes an angle of 30 degree, θ' = 9.9 degrees, TI = 0.00061, RI = 0.99939.

To calculate the intensity transmission coefficient (TI) and reflection coefficient (RI) for each interface, we need to use the following equations:

TI = (2Z1cosθ)/(Z1cosθ + Z2cosθ')
RI = (Z2cosθ - Z1cosθ')/(Z2cosθ + Z1cosθ')
where Z1 and Z2 are the acoustic impedance of the two materials at the interface, θ is the angle of incidence (which is given as 30 degrees in this case), and θ' is the angle of transmission.
We can find the acoustic impedance for each material using the equation:
Z = ρc
where ρ is the density of the material and c is the speed of sound in that material. The values for ρ and c are typically given in tables or can be looked up online.
Using these equations, we can calculate the TI and RI for each interface:


Muscle/kidney interface:

- Z1 (muscle) = 1.64 x 10^6 kg/m²s
- Z2 (kidney) = 1.48 x 10^6 kg/m²s
- θ = 30 degrees

Using the equations above, we can find:

- θ' = 19.6 degrees
- TI = 0.71
- RI = 0.29

Air/muscle interface:

- Z1 (air) = 4 x 10^2 kg/m^2s
- Z2 (muscle) = 1.64 x 10^6 kg/m^2s
- θ = 30 degrees

Using the equations above, we can find:

- θ' = 1.9 degrees
- TI = 0.99999
- RI = 0.00001

Bone/muscle interface:

- Z1 (bone) = 7.8 x 10^6 kg/m^2s
- Z2 (muscle) = 1.64 x 10^6 kg/m^2s
- θ = 30 degrees

Using the equations above, we can find:

- θ' = 9.9 degrees
- TI = 0.00061
- RI = 0.99939

Learn more about intensity transmission coefficient here:-

https://brainly.com/question/17136252

#SPJ11

A. 149 kg baseball moving at 17. 7 m/s is caught by a 57 kg catcher at rest on an ice skating rink,


wearing frictionless skates. With what speed does the catcher slide on the ice?


Do NOT put in units or it will be marked wrong! The answer's value only! Please round each


answer to 3 places.


Mava + MbVb = (Ma+b)(Va+b)

Answers

The catcher slides on the ice at a speed of 3.09 m/s after catching the baseball. Friction occurs whenever two surfaces come into contact with each other and tends to resist their relative motion.

What is Friction?

Friction is the force that opposes motion or attempted motion between two surfaces in contact with each other. It is a fundamental force of nature that arises due to the interaction between the molecules of the two surfaces in contact.

Using the principle of conservation of momentum:

Initial momentum of the baseball = final momentum of the baseball and the catcher

Therefore, m1v1 = m1v1' + m2v2'

where,

Solving for v2', we get:

v2' = (m1v1 - m1v1') / m2

Substituting the values, we get:

v2' = (149 kg x 17.7 m/s) / (57 kg) = 46.25 m/s

Since the catcher was initially at rest, his initial velocity (v2) is zero.

Therefore, his change in velocity (v2') is equal to his final velocity (v2).

Thus, v2 = 46.25 m/s.

However, since the ice is frictionless, the catcher would continue sliding on the ice at this speed indefinitely. Therefore, the final answer is:

v2 = 3.09 m/s.

Learn more about Friction from the given link

https://brainly.com/question/24338873

#SPJ4

A mechanical system is used to pull a tarp over a grass tennis
court. On a clear, sunny day, the efficiency of the system is
55%. After a rainstorm, the efficiency is measured to be 65%.
Explain why there is a difference in the efficiencies.

Answers

The difference in efficiencies of the mechanical system can be attributed to several factors such as increase in frictional force between the tarp and the system, an increase in tarp weight owing to water absorption, and an overall increase in resistance on the grass court due to wetness.

Firstly, the frictional force between the tarp and the mechanical system may have increased due to water on the tarp, leading to a decrease in efficiency.

Secondly, the weight of the tarp may have increased due to water absorption, leading to a greater load on the mechanical system, which in turn reduces efficiency.

Thirdly, the presence of water on the grass court may have increased the overall resistance to the movement of the tarp, leading to a decrease in efficiency.

These factors combined may explain the observed difference in efficiencies between the clear, sunny day and after a rainstorm.

For more such questions on mechanical system, click on:

https://brainly.com/question/13189455

#SPJ11

The figure shows a 25-cm-long metal rod pulled along two frictionless, conducting rails at a constant speed of 3. 5 m/s. The rails have negligible resistance, but the rod has a resistance of 0. 65 Ω

Answers

The magnitude of the force required to keep the rod moving at a constant speed is 0.9065 N.

First, let's find the induced electromotive force (EMF) using Faraday's law of electromagnetic induction: EMF = B * L * v, where L is the length of the rod, and v is its velocity. Converting the length to meters: L = 0.25 m.

EMF = 1.4 T * 0.25 m * 3.7 m/s = 1.295 V

Next, let's find the induced current using Ohm's law: I = EMF / R, where R is the resistance of the rod.

I = 1.295 V / 0.50 Ω = 2.59 A

The current induced in the rod is 2.59 A.

Now, let's calculate the magnitude of the force required to keep the rod moving at a constant speed. The force needed to maintain constant speed is equal to the magnetic force acting on the rod, which is given by F = I * L * B.

F = 2.59 A * 0.25 m * 1.4 T = 0.9065 N

The magnitude of the force required to keep the rod moving at a constant speed is 0.9065 N.

To know more about force, refer here:

https://brainly.com/question/12457580#

#SPJ11

Complete question:

The figure shows a 25 cm -long metal rod pulled along two frictionless, conducting rails at a constant speed of 3.7 m/s . The rails have negligible resistance, but the rod has a resistance of 0.50 Ω .

B=1.4T

What is the current induced in the rod?

What is the magnitude of the force is required to keep the rod moving at a constant speed?

A diver makes 1.0 revolutions on the way from a 9.5-m-high platform to the water. assuming zero initial vertical velocity, find the diver's average angular velocity during a dive.

Answers

The average angular velocity (ω) of the diver during the dive can be found using the formula:

1. ω = Δθ / Δt

where Δθ is the change in angle (in radians) and Δt is the time interval over which the change occurred.

In this case, the diver makes one complete revolution (i.e., a change in angle of 2π radians) during the dive, and we are not given the time interval directly.

However, we can use other information to find the time it takes for the diver to complete one revolution.

The diver falls from a height of 9.5 m, which means that the time it takes for the diver to hit the water can be found using the formula:

Δy = [tex]1/2 gt^2[/tex]

where Δy is the displacement (9.5 m), g is the acceleration due to gravity and t is the time interval. Solving for t, we get:

t = √(2Δy/g)

t = √(2 x 9.5 m / 9.8 m/s^2)

t = 1.43 seconds

Therefore, the time it takes for the diver to complete one revolution is twice this time (since the diver completes one revolution on the way down and another on the way up), or:

Δt = 2t = 2 x 1.43 s

Δt = 2.86 seconds

2. we can use this value to find the average angular velocity of the diver:

ω = Δθ / Δt

ω = 2π rad / 2.86 s

ω = 2.19 rad/s (rounded to two decimal places)

Therefore, the diver's average angular velocity during the dive was 2.19 rad/s.

To know more about angular velocity refer here

https://brainly.com/question/29557272#

#SPJ11

What is the idea of manifest destiny, and how might it apply to space exploration?

Answers

The idea of manifest destiny refers to the 19th-century belief that it was the inevitable and divinely ordained destiny of the United States to expand its territory across North America.

This concept was used to justify the westward expansion of the nation and the acquisition of new territories.

Applying the idea of manifest destiny to space exploration suggests that it might be humanity's destiny to expand our presence beyond Earth and explore the universe.

In this context, manifest destiny would involve colonizing other planets, moons, and celestial bodies, ultimately extending human influence throughout the cosmos.

In space exploration, manifest destiny could be seen as a driving force behind the desire to discover new worlds, resources, and potential habitats for humanity.

This might involve missions to Mars, the Moon, or even more distant celestial bodies.

The concept could also promote international collaboration in space exploration, as humanity's collective destiny could be at stake.

To summarize, the idea of manifest destiny is the belief that a nation or people are destined to expand and conquer new territories. In the context of space exploration,

This concept could inspire the pursuit of discovering and colonizing new celestial bodies, ultimately extending humanity's reach throughout the universe.

To know more about North America refer here

https://brainly.com/question/19339803#

#SPJ11

In a vacuum, electromagnetic radiation of short wavelengths.

Answers

In a vacuum, electromagnetic radiation of short wavelengths refers to high-energy radiation. According to the electromagnetic spectrum, shorter wavelengths correspond to higher frequencies and higher energies.

At the short wavelength end of the spectrum, you have gamma rays, which have the shortest wavelengths and highest energy among all forms of electromagnetic radiation. Gamma rays have wavelengths less than 10 picometers (pm) or frequencies greater than 10 exahertz (EHz).

Gamma rays are highly energetic and can penetrate matter deeply. They are often produced in nuclear reactions, radioactive decay, and high-energy particle interactions.

It's important to note that in a vacuum, all forms of electromagnetic radiation, including gamma rays, travel at the speed of light. The properties of electromagnetic radiation, such as wavelength and frequency, are intrinsic characteristics that remain constant regardless of the medium through which they propagate.

To know more about electromagnetic  refer here

https://brainly.com/question/5015556#

#SPJ11

ACTIVITY 1: AGREE OR DISAGREE


Write AGREE, if you think the statement is correct and DISAGREE if otherwise


1. An RPE of 10 means that the activity is very light


2. Swimming and playing basketball are vigorous activities


3. Street and hip hip dances are active recreational activities


4. Proper execution of dance steps increases the risk of injuries


5. A normal nutritional status means that weight is proportional to the height


6. Physical inactivity and unhealthy diet are risk factors for heart disease.


7. Risk walking and dancing are activities which are moderate intensity


8. One can help the community by sharing his/her knowledge and skills in dancing


9. Surfing on the internet and playing computer games greatly improve one's fitness


10. A physically active person engages in 5-10 minutes of moderately vigorous physical activity three or more


times a week

Answers

1. DISAGREE: An RPE of 10 means the activity is extremely hard.
2. AGREE: Swimming and playing basketball are vigorous activities.
3. AGREE: Street and hip-hop dances are active recreational activities.
4. DISAGREE: Proper execution of dance steps reduces the risk of injuries.
5. AGREE: A normal nutritional status means that weight is proportional to the height.
6. AGREE: Physical inactivity and unhealthy diet are risk factors for heart disease.
7. AGREE: Risk walking and dancing are activities which are of moderate intensity.
8. AGREE: One can help the community by sharing his/her knowledge and skills in dancing.
9. DISAGREE: Surfing on the internet and playing computer games do not greatly improve one's fitness.
10. DISAGREE: A physically active person engages in at least 150 minutes of moderately vigorous physical activity per week.

Visit https://brainly.com/question/1133404 to know more about activities

#SPJ11

Why are relativistic calculations particularly important for electrons​

Answers

Relativistic calculations are particularly important for electrons because they move at very high speeds, which means they have a significant fraction of the speed of light.

At these speeds, the special theory of relativity developed by Einstein becomes relevant, and classical mechanics can no longer accurately describe the behavior of electrons.

Relativistic calculations take into account the effects of time dilation, length contraction, and mass-energy equivalence, which all play a role in the behavior of electrons at high speeds.

One consequence of relativistic effects on electrons is that their mass increases as they approach the speed of light, which changes their behavior in a number of ways.

For example, the increased mass means that it requires more energy to accelerate an electron to a high speed, and the increased mass also affects the electron's behavior in a magnetic field.

Relativistic calculations are therefore important in a variety of fields where electrons are important, such as particle physics, materials science, and chemistry.

To know more about electrons refer here:

https://brainly.com/question/19448078#

#SPJ11

Two balloons are separated by a distance of 25. 5 cm. One balloon is charged with a charge of + 6. 25 nC = + 6. 25 x 10-9 C and the other balloon is charges with a charge of - 3. 5 nC = - 3. 5 x 10-9 C. Calculate the magnitude of Coulombic Force between them. Explain what kind of coulombic force will exist between them (attractive or repulsive)?

Answers

The magnitude of Coulombic force between the two balloons is [tex]3.17 *10^{-4} N[/tex] and it is an attractive force as the two balloons have opposite charges (+ and - charges).

The Coulombic force between the two charged balloons can be calculated using Coulomb's law:

[tex]F = k * (q1 * q2) / r^2[/tex]

where F is the force, k is the Coulomb constant [tex](9 * 10^9 N*m^2/C^2)[/tex], q1 and q2 are the charges of the two balloons, and r is the distance between them.

Substituting the given values, we get:

F =[tex]9 * 10^9 * [(+6.25 * 10^{-9}) * (-3.5 * 10^{-9})] / (0.255)^2[/tex]

F = [tex]-3.17 *10^{-4} N[/tex] (negative sign indicates an attractive force)

To know more about Coulomb's law refer here

https://brainly.com/question/506926#

#SPJ11


_______ assisted Anton Raphael Mengs with the iconography of his ceiling fresco, Parnasus, in the Villa Albani.

A) Johann Winckelmann
B) Cardinal Albani
C) Jacques Louis David
D) Joshua Reynolds

Answers

Answer:

Explanation:

The correct answer is A) Johann Winckelmann. Johann Winckelmann, a German art historian and archaeologist, assisted Anton Raphael Mengs with the iconography of his ceiling fresco, Parnassus, in the Villa Albani

The force of __________ will be greater if one object has a larger mass than the other

Answers

The force of gravity will be greater if one object has a larger mass than the other.

Gravity is the force of attraction between two objects with mass. According to Newton's law of gravitation, the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.

F = G * (m₁ * m₂) / d²

where:

F = force of gravity

G = gravitational constant (a universal constant)

m₁, m₂ = masses of the two objects

d = distance between the two objects

As we can see from the formula, the force of gravity is directly proportional to the masses of the two objects. Therefore, if one object has a larger mass than the other, the force of gravity between them will be greater.

To know more about force, here

https://brainly.com/question/13191643

#SPJ4

with the switch open, the potential difference across the capacitor in figure p23.44 is 10.0 v. after the switch is closed, how long will it take for the potential difference across the capacitor to decrease to 5.0 v?

Answers

It will take approximately 5.54 ms for the potential difference across the capacitor to decrease from 10.0 V to 5.0 V after the switch is closed.

The time constant of the circuit can be calculated using the formula RC, where R is the resistance in the circuit and C is the capacitance of the capacitor. From the diagram, we can see that the resistance in the circuit is 4.00 kΩ and the capacitance of the capacitor is 2.00 μF. Therefore, the time constant of the circuit is:

RC = 4.00 kΩ × 2.00 μF = 8.00 ms

When the switch is closed, the capacitor will start to discharge through the resistor. The rate at which the potential difference across the capacitor decreases is given by:

V = V0 × e^(-t/RC)

Where V is the potential difference across the capacitor at time t, V0 is the initial potential difference across the capacitor (10.0 V in this case), and e is the base of the natural logarithm.

To find the time it takes for the potential difference across the capacitor to decrease to 5.0 V, we can rearrange the equation to:

t = -RC × ln(V/V0)

Substituting the values given, we get:

t = -8.00 ms × ln(5.0 V/10.0 V) = 5.54 ms

To learn more about : decrease
https://brainly.com/question/2073174
#SPJ11

Two bumper cars collide into each other and each car jolts backwards this is an example of which of newtons laws?

Answers

When two bumper cars collide into each other and each car jolts backwards, this is an example of: Newton's Third Law of Motion also known as the law of action and reaction.

Newton's Third Law states that for every action, there is an equal and opposite reaction. In the case of the bumper cars, when they collide, the force exerted by Car A on Car B (the action) is equal in magnitude and opposite in direction to the force exerted by Car B on Car A (the reaction).

This is why both cars experience a jolt in opposite directions after the collision.

To recap, the situation you described with the two bumper cars colliding and jolting backwards is an example of Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction.

This law helps us understand the behavior of objects during collisions and interactions, and it plays a crucial role in understanding the principles of physics.

To know more about Third Law of Motion, refer here:

https://brainly.com/question/29768600#

#SPJ11

Based on the text how might the surfing "purists" feel about the movement toward incorporating aerial moves into surfing competitions? Use evidence from the text to support your answer

Answers

Surfing purists dislike aerial moves in competitions, preferring traditional surfing. There is controversy over the emphasis on aerial moves, and diversity of opinion within the community.

The surfing "purists" are likely to be critical of the movement towards incorporating aerial moves into surfing competitions, as they are described as valuing "traditional" or "classic" surfing.

The text notes that these purists "feel that aerial moves represent a departure from classic surfing," and quotes a professional surfer who suggests that "real surfing is all about turns and the flow of the wave."

The article also notes that there is some controversy within the surfing community over the emphasis on aerial moves, with some feeling that it has become too dominant in competitions. This further suggests that there are those within the community who are resistant to this trend.

Overall, it seems that the surfing "purists" value a more traditional, flowing style of surfing and may view aerial moves as a departure from this style.

However, it is important to note that there is diversity of opinion within the surfing community, and not all surfers or fans may share this view.

To know more about surfing refer here:

https://brainly.com/question/30407403#

#SPJ11

Hunter pushed a couch across the room. He did 800 J of work in 20 seconds.


The couch weighed 500 N. How much power did he have?


A. 40 W


B. 1. 6 W


C. 16,000 W


D. 800 W


SUBMIT

Answers

Hunter had a power of 40 watts when he pushed the couch across the room.

To solve this problem, we need to use the formula for power, which is P = W/t, where P is power measured in watts, W is work measured in joules, and t is time measured in seconds.

Given that Hunter did 800 J of work in 20 seconds, we can calculate his power as follows:

P = W/t
P = 800 J / 20 s
P = 40 W

Therefore, Hunter had a power of 40 watts when he pushed the couch across the room.

It's important to note that power is a measure of how quickly work is done. In this case, Hunter did 800 J of work in 20 seconds, which means he was doing work at a rate of 40 J/s (or 40 watts). His power would have been greater if he had done the same amount of work in less time. Conversely, his power would have been lower if he had taken longer to do the work.

Know more about Power here:
https://brainly.com/question/24001284

#SPJ11

A crate (60 kg) is in an elevator traveling upward and slowing down at 6 m/s2. find the normal force exerted on the crate by the elevator. assume g

Answers

The normal force exerted on the crate by the elevator is 294 N. The normal force is the force exerted by a surface perpendicular to an object in contact with it.

In this case, the crate is in contact with the floor of the elevator. To solve the problem, we need to find the weight of the crate, which is given by its mass (60 kg) multiplied by the acceleration due to gravity (9.8 m/s2).

So the weight of the crate is 588 N. The force exerted on the crate by the elevator is the normal force.

According to Newton's second law, the sum of the forces acting on the crate is equal to its mass multiplied by its acceleration.

The crate is slowing down at 6 m/s2, so the net force on it is its weight minus the force exerted by the elevator.

Thus, the normal force is equal to the weight of the crate minus the net force acting on it, which is (60 kg)(9.8 m/s2) - (60 kg)(6 m/s2) = 294 N. Therefore, the normal force exerted on the crate by the elevator is 294 N.

To know more about Newton's second law, refer here:

https://brainly.com/question/13447525#

#SPJ11

Which of these is NOT considered an example of low EM energy?
A. infra-red
B. microwaves
C. ultra-violet
D. radio waves​

Answers

ultra-violet is NOT considered an example of low Electromagnetic energy. Hence option C is correct.

Electromagnetic waves, which are synchronised oscillations of the electric and magnetic fields, are the traditional form of electromagnetic radiation. The electromagnetic spectrum is created at various wavelengths depending on the oscillation frequency. Electromagnetic waves move at the speed of light, typically abbreviated as c, in a vacuum. The oscillations of the two fields create a transverse wave in homogeneous, isotropic media when they are perpendicular to each other, perpendicular to the direction of energy and wave propagation, and perpendicular to each other. Either an electromagnetic wave's oscillation frequency or its wavelength can be used to describe its location within the electromagnetic spectrum. Because they come from different sources and have different effects on matter, electromagnetic waves of different frequencies are known by various names. These are listed in decreasing wavelength and increasing frequency order: sound waves, lower energy have lower frequency.

To know more about Electromagnetic :

https://brainly.com/question/17057080

#SPJ1.

Two charged spheres electron and proton are 10 cm apart attract each other.


The charge of the spheres are 9. 11 x 10-31 C and 1. 67 x 10-27 C. What force results


from each other? What will be the force if the separation is increased to 30 cm?

Answers

Force when The seperation is 10 cm= 1.36 x 10^-45 N and when it is 30 cm= 1.51 x 10^-46 N

To answer your question, we will use Coulomb's Law to calculate the force between the charged spheres (electron and proton). Coulomb's Law states:

F = k * (q1 * q2) / r^2

Where F is the force, k is the electrostatic constant (8.99 x 10^9 Nm^2/C^2), q1 and q2 are the charges of the spheres, and r is the distance between them.

Given the charges q1 = 9.11 x 10^-31 C (electron) and q2 = 1.67 x 10^-27 C (proton), and the initial distance r = 10 cm = 0.1 m, we can calculate the force:

F = (8.99 x 10^9 Nm^2/C^2) * (9.11 x 10^-31 C) * (1.67 x 10^-27 C) / (0.1 m)^2
F ≈ 1.35 x 10^-45 N

Now, let's calculate the force when the separation is increased to 30 cm = 0.3 m:

F_new = (8.99 x 10^9 Nm^2/C^2) * (9.11 x 10^-31 C) * (1.67 x 10^-27 C) / (0.3 m)^2
F_new ≈ 1.50 x 10^-46 N

So, the force between the charged spheres when they are 10 cm apart is approximately 1.35 x 10^-45 N, and when the separation is increased to 30 cm, the force becomes approximately 1.50 x 10^-46 N.

Visit https://brainly.com/question/19886264 to know more about  chargecharge

#SPJ11

How many grams are in 0. 02mol of Mg (25. 3g/mol)​

Answers

There are 0.506 grams in 0.02 moles of Mg

To find the grams of Mg in 0.02 mol, you can use the formula:

grams = moles × molar mass

In this case, moles = 0.02 mol, and the molar mass of Mg = 25.3 g/mol. Plug in the values:

grams = 0.02 mol × 25.3 g/mol

grams = 0.506 g

So, there are 0.506 grams of Mg in 0.02 mol.

Visit https://brainly.com/question/31597231 to learn more about moles

#SPJ11

What's the mass and weight of each of object if there were placed on mass gmars=3. 8n/kg

Answers

The mass of an object is a measure of the amount of matter in the object, while weight is the force exerted on an object due to gravity: the mass of an object will remain the same regardless of its location in the universe, while its weight will vary depending on the gravitational force at that location.

Assuming that the question is referring to the planet Mars, where the gravitational force is approximately 3.8 N/kg, we can calculate the weight of each object based on their mass. For example, if we have an object with a mass of 1 kg, its weight on Mars would be:

Weight = Mass x Gravity

Weight = 1 kg x 3.8 N/kg

Weight = 3.8 N

Therefore, the weight of a 1 kg object on Mars would be 3.8 N. Using the same formula, we can calculate the weight of other objects placed on Mars based on their respective masses.

In conclusion, if an object is placed on Mars, its weight will vary depending on the planet's gravitational force, which is approximately 3.8 N/kg. However, its mass will remain the same regardless of its location in the universe.

To know more about gravitational force, refer here:

https://brainly.com/question/14874038#

#SPJ11

What is the relationship between the value of the coefficient of friction and the mass of an object for the inclined plane experiment? to what extend does the result confirm this?​

Answers

The coefficient of friction and mass of an object both affect its acceleration on an inclined plane, and there is a relationship between the two as seen in the net force equation.

The coefficient of friction is a measure of the amount of friction between two surfaces in contact. For an inclined plane experiment, the coefficient of friction between the surface of the plane and the object sliding down it will affect the acceleration of the object. Specifically, a higher coefficient of friction will lead to a lower acceleration.

The mass of the object also affects its acceleration on the inclined plane. A heavier object will have a greater gravitational force acting on it, which will result in a greater acceleration down the plane.

The relationship between the coefficient of friction and the mass of an object can be seen in the equation for the net force on the object:

[tex]Fnet = mgsin(\theta) - \mu\;mgcos(\theta),[/tex]

where μ is the coefficient of friction, m is the mass of the object, g is the acceleration due to gravity, and θ is the angle of the inclined plane.

To confirm this relationship, experiments can be conducted with different masses and coefficients of friction, and the resulting accelerations can be measured. The data can then be analyzed to see if there is a correlation between the mass and coefficient of friction and the resulting acceleration.

In summary, the coefficient of friction and mass of an object both affect its acceleration on an inclined plane, and there is a relationship between the two as seen in the net force equation. Experiments can be conducted to confirm this relationship.

To know more about mass refer here:

https://brainly.com/question/18064917#

#SPJ11

Other Questions
Question about midsummer night's dream: bottom interacts with all the characters on the stage, both humans and fairies. what character traits allow him to be comfortable in both worlds? What percent of the customers at the book sale spent less than 20 dollars? Show or explain how you got your answer Prove that U(1, 1), Q(4,4), and A(6, 2) are the vertices of a right triangle. Use the following as a guide. Find the slopes of sides UQ, QA, and UA. Which segments are perpendicular? How do you know the segments are perpendicular? What are the lengths of each side? Use the Pythagorean Theorem to show that it is a right triangle. Indonesia and the philippines are both challenged by? College Level Trig Question Any help will do!! Waterways Corporation is preparing its budget for the coming year, 2020. The first step is to plan for the first quarter of that coming year. The company has gathered information from its managers in preparation of the budgeting process. Sales Unit sales for November 2019 112,000Unit sales for December 2019 102,000Expected unit sales for January 2020 114,000Expected unit sales for February 2020 114,000Expected unit sales for March 2020 116,000Expected unit sales for April 2020 126,000Expected unit sales for May 2020 136,000Unit selling price $12Waterways likes to keep 10% of the next months unit sales in ending inventory. All sales are on account. 85% of the Accounts Receivable are collected in the month of sale, and 15% of the Accounts Receivable are collected in the month after sale. Accounts receivable on December 31, 2019, totaled $183,600. Direct MaterialsDirect materials cost 80 cents per pound. Two pounds of direct materials are required to produce each unit. Waterways likes to keep 5% of the materials needed for the next month in its ending inventory. Raw Materials on December 31, 2019, totaled 11,400 pounds. Payment for materials is made within 15 days. 50% is paid in the month of purchase, and 50% is paid in the month after purchase. Accounts Payable on December 31, 2019, totaled $103,740. Direct LaborLabor requires 12 minutes per unit for completion and is paid at a rate of $6 per hour. Manufacturing OverheadIndirect materials 30 per labor hourIndirect labor 50 per labor hourUtilities 40 per labor hourMaintenance 30 per labor hourSalaries $41,000 per monthDepreciation $18,500 per monthProperty taxes $2,900 per monthInsurance $1,200 per monthMaintenance $1,400 per monthSelling and AdministrativeVariable selling and administrative cost per unit is $1. 60. Advertising $16,000 a monthInsurance $1,600 a monthSalaries $73,000 a monthDepreciation $2,400 a monthOther fixed costs $3,100 a monthOther InformationThe Cash balance on December 31, 2019, totaled $103,000, but management has decided it would like to maintain a cash balance of at least $800,000 beginning on January 31, 2020. Dividends are paid each month at the rate of $2. 30 per share for 4,800 shares outstanding. The company has an open line of credit with Romneys Bank. The terms of the agreement requires borrowing to be in $1,000 increments at 6% interest. Waterways borrows on the first day of the month and repays on the last day of the month. A $520,000 equipment purchase is planned for February. For the first quarter of 2020, prepare a cash budget. (Round answers to 0 decimal places, e. G. 2,520. ) When energy leaves the suns core, it travels through the radiative zone in the form of ___.a. liquidsb. coronas c. electromagnetic wavesd. convection currents Which of the following is not a responsibility of local government What is the equation of a circle with center (2,3) that passes through the point (5, 3)? 22. The expression 3(-4b) - 2(a - b - c) is equal to which of the following expressions?(1) -2a - 10b - 2c (2) -2a - 10b + 2c (3) -2a -5b + 2c (4) -2a -4b - 2c (5) 2a-4b - 2c If 450.5 calories of heat energy are added to a 89.6 gram sample of aluminium (specific heat of 0.215 calories per gram degree celsius) and the initial temperature of the sample is 25.7 degrees celsius then what is the final temperature in degrees celsius? Which type of sentence error occurs when a sentence is missing a subject or predicate? No error Fragment Subject -verb agreement Run-on Please help me out its a new topic and I dont know how to do it Texto argumentativo sobre la donacin de rganos Lulu has 10 feet of ribbon she uses 1 1/3 feet ribbon for a project she uses the rest of the ribbon to make bows she uses 8 inches of ribbon for each bowl how many does lulu make? 50 Points! Multiple choice algebra question. Which function represents exponential growth? Photo attached. Thank you! How do I do number 3? Add a subordinate clause1. the rain was pouring Imagine you are a trader in a Berber caravan describe the preparations you must make and thoughts about your journey Computers (part 2) Review and Quiz Test: Vocabulary and Grammar 2.17So this isn't a question it's just me trying to help others on this test. so the answers are: a,b,c,d,d,a,b,d,d,a,d,c,b,a,b,b,a,b,b,b,a,a,a,b,aNot all these are right but it should get you 88%.