When an electrical pulse on one wire is accidentally detected on another nearby wire, this phenomenon is known as "crosstalk."
This can happen in various scenarios, such as in a network cable where multiple wires run parallel to each other or in a phone line where a conversation on one line is heard on another.
Crosstalk can cause interference and noise in communication signals, which can result in errors and reduce the quality of the signal. To minimize the impact of crosstalk, various techniques are used, such as shielding, twisting the wires, and using filters.
Duplex communication, on the other hand, refers to a mode of communication where data can be transmitted and received simultaneously, such as in a phone call where both parties can speak and hear at the same time.
A preamble is a signal used to synchronize communication between devices and prepare them for data transmission. It typically contains a set of bits that indicate the start of a communication session.
Multicast is a method of communication where a single message is sent to multiple recipients simultaneously. This is commonly used in streaming media and video conferencing applications.
In summary, the correct term for the accidental detection of electrical pulses on nearby wires is "crosstalk."
Learn more about duplex communication here:
https://brainly.com/question/29998337
#SPJ11
Explain the main concepts of a Distributed Computing system.
The main concepts of a distributed computing system include nodes, networks, communication protocols, distributed data storage, load balancing, fault tolerance, and parallel computing.
Nodes are the individual computers or devices that participate in the distributed computing system; they are called nodes. The nodes in a distributed computing system are connected through a network, which allows them to communicate and exchange data with each other. To communicate with each other, nodes in a distributed computing system must follow a set of communication protocols, and data is often stored across multiple nodes rather than on a single centralized server.
Learn more about the computing system here.
https://brainly.com/question/30146762
#SPJ4
When you opt to use the wipe-and-load migration strategy
The wipe-and-load migration strategy is a popular choice for organizations looking to upgrade their systems, as it provides a clean slate to work with, potentially improving system performance and reducing the risk of transferring old issues or unwanted data.
Wipe-and-load migration strategy
When you opt to use the wipe-and-load migration strategy, you are choosing a method of transferring data and applications from an old system to a new one. This process involves the following steps:
1. Back up all important data and settings from the old system, as everything will be erased during the process.
2. Completely erase or "wipe" the old system, removing all existing data, applications, and settings.
3. Install a new operating system on the wiped device, creating a fresh environment for the data and applications to be transferred to.
4. Migrate the backed-up data and settings to the new system, ensuring all necessary applications are reinstalled and properly configured.
5. Verify that all data and applications have been successfully migrated and are functioning correctly on the new system.
To know more about operating system visit:
https://brainly.com/question/31551584
#SPJ11
Supervised mobile devices can be managed by Jamf Pro.
a) True
b) False
Supervised mobile devices can be managed by Jamf Pro. The statement is True. The answer is a).
Supervised mobile devices
Supervised mobile devices can indeed be managed by Jamf Pro. Jamf Pro is a comprehensive management solution for Apple devices, including mobile devices like iPhones and iPads. Supervising these devices allows for advanced management capabilities and control over the device's settings and configurations.
What is configuration?
The configuration in computer networks and computers refers to the software and specific hardware. The details in terms of devices capacity, attached, or capability. In networking terms, the configuration is related to the network topology. In the field of software and hardware, configuration denotes the process that defines the options to install the application.
To know more about mobile devices visit:
https://brainly.com/question/31608002
#SPJ11
Describe why direct memory access (DMA) is considered an efficient mechanism for performing I/O.
Direct memory access (DMA) is considered an efficient mechanism for performing I/O because it allows data to be transferred between peripherals and memory without involving the CPU. This means that the CPU can continue to perform other tasks while the data transfer is taking place, improving overall system performance.
What is Direct memory access (DMA)?
Direct Memory Access (DMA) is a technique used in computer systems to transfer data between the main memory and peripheral devices without involving the CPU. DMA enables faster and more efficient data transfer by allowing devices to read from or write to the memory directly, bypassing the CPU and freeing it for other tasks.
To know more about Direct memory access (DMA) visit:
https://brainly.com/question/30641399
#SPJ11
Given a table in Databricks: Using sql, access the field street in the struct type column named address.
Assuming you have a table named my_table in Databricks with a column named address that contains a struct type with a field named street, you can navigate through the fields of the struct using SQL and the dot notation.
Here's an example SQL query to select the street field from the address column of my_table:
SELECT address.street
FROM my_table
Address.street is used in this query to access the street field within the address struct. For each row in my_table, the SELECT statement returns only the street field.
Thus, as needed, you can modify this SQL query to include additional columns or filtering conditions.
For more details regarding SQL, visit:
https://brainly.com/question/20264930
#SPJ4
most programs austomatically assume you want to save and open files in the documents folder, true or false
The statement "most programs automatically assume you want to save and open files in the Documents folder" is true because the Documents folder is a default location in many operating systems, such as Windows and macOS, which is designed for storing and organizing user files.
The primary purpose of the Documents folder is to provide a convenient, centralized location for users to save and access their files. As a result, software developers often configure their applications to use this folder by default when saving or opening files, making it easier for users to locate their files without navigating through complex directory structures.
Additionally, using the Documents folder as the default location helps maintain a consistent user experience across different applications and platforms. Users can expect to find their files in the Documents folder, whether they are working with a word processor, spreadsheet, or other types of software.
However, it is essential to note that most applications also provide the option to choose a different folder or directory for saving and opening files, allowing users to customize their file organization based on personal preferences or project requirements.
In summary, the statement is true, as the majority of programs automatically assume users want to save and open files in the Documents folder, streamlining the user experience and promoting organized file management.
Learn more about Documents folder here: https://brainly.com/question/29857041
#SPJ11
Which of the following scenarios is invalid for execution by unit tests?
A Executing methods for negative test scenarios
B Loading the standard Pricebook ID using a system method
C Loading test data in place of user input for Flows
D Executing methods as different users
The invalid scenario for the execution of unit tests is executing methods for negative test scenarios
Given data ,
Unit tests are designed to test the functionality and behavior of individual units of code in isolation, typically at the method level. Negative test scenarios, such as intentionally providing invalid input or triggering error conditions, may not be suitable for unit tests as they can introduce unpredictable behavior and dependencies on external factors, making the test results unreliable and difficult to interpret.
Unit tests should focus on positive test scenarios, where the code is tested with valid input and expected outputs. Negative test scenarios can be tested using other types of tests, such as integration tests or system tests, where the overall system behavior and interactions can be evaluated. It's important to follow best practices for unit testing and ensure that unit tests are designed to provide meaningful and reliable results for validating the correctness of individual units of code.
To learn more about types of software testing click :
https://brainly.com/question/22710306
#SPJ4
The text that says "mySprite" is a(n).
manipulated.
on start
set mySprite to sprite
O A. input
OB. parameter
OC. variable
OD. output
because it can be changed and
of kind Player ▾
its c
Answer :
Correct, the text "mySprite" is a variable. It is C.
Problem With the RDT 3.0 Model Protocol
When the maximum delay from sender to receiver and return is unknown, the RDT 3.0 protocol is used to safely transmit data over a channel that can corrupt or lose packets in either way.
Thus, The transitions for the sender and receiver's FSMs are denoted below with the letters SX and RY, respectively.
RDM series of sender and receiver changes that would take place in the event that one or more of the problems listed below take place: a packet (data or ACK) is lost, a timer expires or a message is malformed.
RDM series of transitions below was created by one or more of these occurrences. One transition has been removed and replaced with an in the sequence below.
Thus, When the maximum delay from sender to receiver and return is unknown, the RDT 3.0 protocol is used to safely transmit data over a channel that can corrupt or lose packets in either way.
Learn more about RDT, refer to the link:
https://brainly.com/question/31378318
#SPJ4
What type of legal agreement typically covers sensitive data and information that a penetration tester may encounter while performing an assessment?
A. A noncompete
B. An NDA
C. A data security agreement
D. A DSA
B. An NDA (Non-Disclosure Agreement) is the legal agreement typically used to cover sensitive data and information encountered by a penetration tester during an assessment.
The agreement specifies that the tester will not disclose any confidential information they obtain during the engagement. An NDA is a legally binding contract between two parties that outlines the confidential information that will be shared between them and the restrictions on its use and disclosure. Penetration testing engagements typically involve access to sensitive information, such as login credentials and system configurations. Therefore, an NDA is essential to protect the client's sensitive data from unauthorized disclosure. The NDA must be signed before the penetration testing engagement begins and should include provisions for the return or destruction of any data obtained during the engagement.
learn more about data here:
https://brainly.com/question/27211396
#SPJ11
*When highlighting duplicate values with a conditional format, do the duplicate values have to be adjacent to each other?
To answer your question, when highlighting duplicate values with a conditional format, the duplicate values do not have to be adjacent to each other.
Here's a step-by-step explanation of how to use conditional formatting to highlight duplicate values in a dataset:
1. Select the range of cells where you want to identify duplicates. This range can include adjacent or non-adjacent cells.
2. Go to the "Home" tab in the Excel toolbar.
3. In the "Styles" group, click on "Conditional Formatting."
4. From the dropdown menu, choose "Highlight Cells Rules."
5. In the submenu that appears, select "Duplicate Values."
6. A dialog box will open, allowing you to customize the formatting for the duplicate values. Choose the desired format from the available options.
7. Click "OK" to apply the conditional formatting.
Now, Excel will highlight all the duplicate values in the selected range, regardless of whether they are adjacent or not. This feature allows you to quickly identify and manage duplicate data in your dataset, helping you maintain accuracy and consistency in your work.
In summary, conditional formatting for duplicate values in Excel does not require the values to be adjacent to each other. By following the steps mentioned above, you can easily highlight duplicates in any range of cells.
Learn more about Conditional Format here:
https://brainly.com/question/30166920
#SPJ11
StayWell provides maintenance services across the properties they manage. The SERVICE_CATEGORY table in their database contains a _____.a. property IDb. location numberc. description of the categoryd. location name
The SERVICE_CATEGORY table contains a description of the category. In the StayWell database, the SERVICE_CATEGORY table likely contains information about the various types or categories of maintenance services that the organization provides to the properties they manage.
Each row in the table represents a single service category, and the table likely contains columns for various attributes of each category, such as the category's description and any associated costs or fees.
To differentiate between the different types of maintenance services offered, a description of the category is used. This description is a text-based description of the type of service that is provided, such as "Plumbing Repair" or "Electrical Maintenance". The description serves as the primary identifier for each service category in the table.
The use of a service category description is important for various database operations, such as querying and reporting on the types of services provided. It allows the database system to group similar services together and provide information about the frequency and costs of each service category across different properties.
Learn more about attributes here:
https://brainly.com/question/28163865
#SPJ11
You are configuring access for a shared folder on Windows Server 2012 R2. There is a global group called Appusers who need read-only access. However, ther is a member of Appusers, jsmith, who should not have any access at all.
Configuring access for a shared folder on Windows Server 2012 R2 for the global group Appusers with read-only access while preventing a member, jsmith, from having any access.
How to configure access for the shared folder?
1. First, right-click the shared folder and select "Properties."
2. Navigate to the "Security" tab.
3. Click "Edit" to modify the permissions.
4. Click "Add" to add the Appusers group.
5. In the "Enter the object names to select" field, type "Appusers" and click "Check Names" to validate the group name. Click "OK" when it is confirmed.
6. With the Appusers group selected, in the "Permissions for Appusers" section, check the box next to "Read" under "Allow." Ensure that all other boxes are unchecked. Click "Apply" and then "OK."
7. Now, click "Add" again to deny access to jsmith.
8. In the "Enter the object names to select" field, type "jsmith" and click "Check Names" to validate the username. Click "OK" when it is confirmed.
9. With jsmith selected, in the "Permissions for jsmith" section, check the box next to "Deny" under "Full control." This will deny all permissions for jsmith. Click "Apply" and then "OK."
10. Click "OK" to close the Properties window and save the changes.
The Appusers group should have read-only access to the shared folder on Windows Server 2012 R2, while jsmith should not have any access at all.
To know more about Windows Server 2012 R2 visit:
https://brainly.com/question/30511367
#SPJ11
Write the code to call a function named send_object and that expects one parameter, of type Customer.
Suppose there is an object of type Customer, referred to by John_Doe. Use this object as an argument to the function.
the code to call a function named send_object and that expects one parameter, of type Customer : send_object(John_Doe)
This code calls the function send_object and passes an object of type Customer named John_Doe as its argument. The send_object function is expected to accept this argument and perform some action on it.
In object-oriented programming, a function can be defined to accept an object of a specific class as its parameter. In this case, the send_object function expects an object of type Customer. By passing the John_Doe object as an argument, we are effectively sending the Customer object to the function, which can then access its properties and perform some operation on it.
learn more about code here:
https://brainly.com/question/17204194
#SPJ11
for loop general structurefor (a,b,c)
The general structure of a for loop in programming typically follows this format:
for (a; b; c) {
// code to be executed
}
In this structure, "a" is the initialization statement, where you declare and/or assign values to any variables that you'll be using in the loop. "b" is the condition statement, which evaluates to a boolean value (either true or false) and determines whether the loop will continue to execute or not. And "c" is the increment or decrement statement, which updates the value of any variables used in the loop after each iteration.
Here's an example of a for loop in action, using the general structure above:
for (var i = 0; i < 10; i++) {
console.log(i);
}
In this example, "i" is initialized to 0, and the loop will continue to execute as long as "i" is less than 10 (the condition statement). After each iteration of the loop, "i" is incremented by 1 (the increment statement). The code inside the loop simply logs the current value of "i" to the console, so this loop would output the numbers 0 through 9.
Read more about for loop : https://brainly.com/question/31579612
#SPJ11
in network communication, what address is used to deliver a frame to the correct computer on the network? (choose two.)
In network communication, the MAC address is used to deliver a frame to the correct computer on the network. Additionally, the IP address is also used to route packets to the correct destination.
In network communication, the two addresses used to deliver a frame to the correct computer on the network are the "IP address" and the "MAC address". The IP address (Internet Protocol address) is a logical address that helps route packets across the network, while the MAC address (Media Access Control address) is a physical address that identifies a specific network interface on a device. These two addresses work together to ensure that the frame reaches the correct destination within the network.
More on network : https://brainly.com/question/8118353
#SPJ11
geometricTerms=a*rRowArray ; sumTerms=sum(geometricTerms)
It appears that you are trying to compute the product of a scalar value a with a row array rRowArray in MATLAB, and then compute the sum of the resulting array geometricTerms using the sum function.
Here is the corrected code with appropriate variable names and syntax:
matlab
Copy code
a = 3; % Example value for scalar 'a'
rRowArray = [2, 4, 6, 8]; % Example row array 'rRowArray'
geometricTerms = a * rRowArray; % Compute the product of 'a' and 'rRowArray'
sumTerms = sum(geometricTerms); % Compute the sum of 'geometricTerms'
In this code, a is a scalar value, rRowArray is a row array of values, and geometricTerms is the result of multiplying a with rRowArray element-wise. The sum function is then used to compute the sum of the resulting array geometricTerms, and the result is stored in the variable sumTerms. Please note that the actual values of a and rRowArray should be replaced with your desired values for the specific calculation you are trying to perform.
learn more about rRowArray here:
https://brainly.com/question/30907879
#SPJ11
The QuickLook Pane is an area on the right side of a window that shows you what a selected file looks like without opening it. true or false
The statement "The QuickLook Pane is an area on the right side of a window that shows you what a selected file looks like without opening it" is True because it provides a preview of the selected file in the window without the need to open it, allowing for faster and more efficient file browsing.
The QuickLook Pane typically appears on the right side of a window, and when a file is selected, its contents, such as text, images, or videos, are displayed in the pane, providing a visual preview of the file's contents. This allows users to quickly assess the content and appearance of a file without having to open it in its associated application, saving time and enabling more efficient file browsing. The QuickLook Pane is a convenient feature that enhances productivity and user experience in navigating and managing files on a computer.
To learn more about QuickLook Pane; https://brainly.com/question/29223106
#SPJ11
Create a formula using the COUNTA function. -->In cell F19, use the COUNTA function that counts the # of cells that aren't empty in the range F5:F18.
To create a formula using the COUNTA function that counts the # of cells that aren't empty in the range F5:F18, you can simply enter the following formula in cell F19:
=COUNTA(F5:F18)
This formula will count the number of cells in the range F5:F18 that contain a value and are not empty. The COUNTA function returns the count of all non-blank cells in a range, so it's perfect for this scenario.
Hi! To create a formula using the COUNTA function in cell F19 to count the number of non-empty cells in the range F5:F18, enter the following formula in cell F19:The COUNTA function in Excel is used to count the number of non-empty cells in a given range. To use this function to count the number of non-empty cells in the range F5:F18 and display the result in cell F19, the following formula can be used:=COUNTA(F5:F18)This formula simply specifies the range of cells to be counted, in this case, F5:F18, as the argument for the COUNTA function. The function then returns the total number of non-empty cells in that range and displays it in cell F19.
It is important to note that the COUNTA function counts any non-empty cell, regardless of whether it contains a numeric or non-numeric value. This means that cells containing text, formulas, or other non-numeric data will also be included in the count.The COUNTA function can be useful for a variety of purposes, such as counting the number of entries in a list or checking the completeness of data in a spreadsheet.
`=COUNTA(F5:F18)`
To learn more about cell F19: click on the link below:
brainly.com/question/30043937
#SPJ11
As you're setting up your Display campaign, your colleague asks you how you'll ensure your ads are seen by the right people. How do you respond?
To ensure that our ads are seen by the right people in our Display campaign, we can utilize several targeting options available in the advertising platform. These options may include:
Audience targeting: We can select specific audiences based on factors such as demographics (e.g., age, gender, location), interests, behaviors, and online activities. This allows us to narrow down our ads to those who are more likely to be interested in our outdoor gear products.
Contextual targeting: We can target our ads to websites, apps, or videos that are relevant to our products, services, or target audience. This allows our ads to be displayed in relevant online environments, increasing the likelihood of reaching the right people.
Placement targeting: We can manually select specific websites, apps, or placements where we want our ads to appear. This gives us more control over ad placements and ensures that our ads are displayed on websites or apps that are relevant to our target audience.
Remarketing or retargeting: We can target individuals who have previously visited our website or engaged with our ads, but have not completed a desired action, such as making a purchase. This allows us to re-engage with these users and remind them about our products or services.
learn more about Display here:
https://brainly.com/question/13532395
#SPJ11
what do we call the principles that have allowed the internet to become a robust, global, flexible system?
Is it mandatory to implement SDLC methods while developing any type of software project?
Yes, it is mandatory to implement SDLC (Software Development Life Cycle) methods while developing any type of software project. Implementing SDLC methods ensures a systematic and organized approach to software development, which results in a higher quality product and better project management. By following the various stages of SDLC, such as planning, analysis, design, implementation, testing, and maintenance, you can effectively manage the development process and achieve a successful software project.
Following a well-defined SDLC process helps ensure that the software is developed in a systematic, organized, and predictable manner. It also helps to identify and mitigate risks early in the development cycle, improves the quality of the software, and ensures that the project is completed on time and within budget.
While it is not strictly mandatory to follow SDLC methods, failing to do so can lead to various issues, such as poor quality software, missed deadlines, and cost overruns. Therefore, it is highly recommended to follow a well-defined SDLC process for any software development project.
To know more about SDLC (Software Development Life Cycle) visit:
https://brainly.com/question/30089251
#SPJ11
Microsoft Access uses the same pure N:M relationships that occur in data modeling. True or false
The answer is False, in Microsoft Access there is no N: M relationships.
What is N: M relationship?It basically stands for Many-to-Many relationship, N:M connection is a relationship between two entities that may have multiple relationships with each other.
A good example is a book authored by several authors. An Author may have written multiple books at the same time.
In a database, there are three sorts of relationships: one-to-one, two-to-
one, and three to three.one-to-many.many-to-many.Learn more about N: M relationship here:
https://brainly.com/question/15055104
#SPJ1
Preceding a condition with which SQL operator reverses the truth of the original condition?
The SQL operator that reverses the truth of a preceding condition is "NOT".
The NOT operator is a logical operator that negates the truth value of a Boolean expression. When used in a WHERE clause, it reverses the condition that follows it. For example, the following SQL statement retrieves all the rows from the customers table where the city column is not equal to "New York":
SELECT * FROM customers WHERE NOT city = 'New York';
This query will return all the rows from the customers table where the city column is not equal to "New York". Without the NOT operator, the query would return all the rows where the city column is equal to "New York".
What is a logical operator ?
hese operators are used to combine or negate Boolean values or expressions. The following are some examples of logical operators in SQL:
AND (logical AND)
OR (logical OR)
NOT (logical NOT)
To know more about logical operator visit:
https://brainly.com/question/13092292
#SPJ11
The DESCRIBE TABLE command defines a SQL table's structure by listing its columns, data types, and column lengths. true or false
True, the DESCRIBE TABLE command in SQL defines a table's structure by listing its columns, data types, and column lengths.
The DESCRIBE or DESC command in SQL is used to display the structure of a table. When you run the DESCRIBE command on a table, it will list the columns of the table along with their data types, column lengths, and any constraints that have been defined on the columns. This information can be helpful in understanding the structure of the table and the types of data it contains.
For example, to describe the structure of a table named employees, you would use the following command:
DESCRIBE employees;
This command will display the column names, data types, and lengths of the columns in the employees table. The output of the command will vary depending on the database management system being used.
To know more about database management system (DBMS) visit:
https://brainly.com/question/13266483
#SPJ11
_____ can be used to manually update the inventory record of a mobile device.
a) A Policy
b) A remote command
c) A configuration profile
d) An extension attribute
b) A remote command. A remote command can be used to manually update the inventory record of a mobile device.
A remote command can be used to manually update the inventory record of a mobile device. This involves sending a command from a remote device to the mobile device instructing it to update its inventory record. This can be useful in situations where there is a discrepancy between the actual inventory and the recorded inventory on the mobile device. By manually updating the inventory record, the mobile device will have an accurate representation of the current inventory. Remote commands can be sent using mobile device management (MDM) software or a similar solution. These commands can be used to perform a variety of functions, such as updating software, configuring settings, or performing security scans.
learn more about mobile device here:
https://brainly.com/question/4673326
#SPJ11
Convert a BST to a Binary Tree such that sum of all greater keys is added to every key
In order to convert a BST to a Binary Tree such that the sum of all greater keys is added to every key, we need to perform a reverse in-order traversal of the tree.
During the traversal, we keep track of a running sum of all the keys we've seen so far. At each node, we add the running sum to the current node's key, and update the running sum to be the sum of the current node's key and all the keys greater than it in the BST.
In other words, for each node, we first visit its right subtree, then update the node's key with the running sum, and finally visit its left subtree.
By doing this for every node in the tree, we end up with a Binary Tree where the sum of all greater keys has been added to every key. This is because during the traversal, we've essentially visited all the nodes in descending order of key values, and added the sum of all greater keys to each node's key as we went along.
To know more about Binary Tree: https://brainly.com/question/16644287
#SPJ11
When the technology became available why did computer encryptions replace manual ones
Computer encryptions replaced manual ones when the technology became available because they offer a higher level of security and efficiency.
Manual encryptions were vulnerable to human error and were time-consuming. With the development of technology, computers became capable of performing complex calculations and algorithms that allowed for stronger and more sophisticated encryption methods.
Additionally, computer encryptions can be easily updated and changed, whereas manual encryptions required significant effort and resources to modify. Overall, the use of computer encryptions offers improved security and convenience in protecting sensitive information.
1. Speed: Computer encryptions are much faster than manual methods, allowing for real-time communication and data exchange.
2. Complexity: Technology allows for more complex and advanced encryption algorithms, making it harder for unauthorized individuals to access or decipher the encrypted information.
3. Automation: With technology, encryption processes can be automated, reducing the chances of human error and increasing the overall security of the system.
4. Scalability: Computer encryptions can be applied to large amounts of data with ease, making it suitable for securing information in a digital age where data volumes are constantly growing.
5. Adaptability: Technological advancements enable the development and implementation of new encryption methods, ensuring that encryption remains up-to-date and effective against potential threats.
To know more about Computer encryptions: https://brainly.com/question/20709892
#SPJ11
What is the process of assessing a target to collect preliminary knowledge about systems, software, networks, or people without directly engaging the target or its assets?
A. Reconnaissance
B. Passive information gathering
C. Web searching
D. Active information gathering
The process of assessing a target to collect preliminary knowledge about systems, software, networks, or people without directly engaging the target or its assets is known as passive information gathering. The answer is B.
Passive information gathering
This can involve various techniques such as monitoring publicly available information, analyzing network traffic, and social engineering. It is an important step in the reconnaissance phase of a security assessment, which also includes active information gathering and vulnerability scanning. Reconnaissance is an initial step in the process of gathering information, and it typically involves both passive information gathering (such as web searching) and active information gathering. This stage aims to collect as much data as possible without alerting the target or engaging with its assets directly.
To know more about Passive information gathering visit:
https://brainly.com/question/15169666
#SPJ11
Something that requests data from a server is known as a ____.switchrouterserverclient
Something that requests data from a server is known as a client.
What is a client?
The client sends requests to the server, which then responds with the requested data. In this context, the client sends requests for data to the server, which then processes the requests and sends the appropriate data back to the client. This communication often takes place through networks that may involve switches and routers to direct the data flow between the server and the client. Switches and routers are devices used for managing network traffic, but they do not directly request data from a server.
To know more about routers visit:
https://brainly.com/question/28273580
#SPJ11
