Answer:
218.3 g/mol
Explanation:
Boiling point elevation occurs when a solute is added to a solvent increasing the boiling point of the solution with regard to the pure solvent.
The law is:
ΔT = Kb×m×i
Where ΔT is change in temperature (3.67°C), Kb is the boiling point constant of the solvent (4.95°C/m), m is molality of the solution and i is Van't Hoff factor (1 for a non-electrolyte).
3.67°C = 4.95°C/m×m×i
0.7414m = molality of the solution (Moles solute / kg solvent).
As the mass of the solvent is 50.0g = 0.0500kg:
0.7414m = Moles solute / 0.0500kg
0.0371 = moles of solute
As the mass of the solute is 8.1g, molar mass of the solute (Ratio between mass in g and moles) is:
8.1g / 0.0371mol =
218.3 g/molhow many grams of NH3 can be produced from 2.51 mil of N2 and excess H2 ?
please help! due in a bit
Answer:
85.34g of NH3
Explanation:
Step 1:
The balanced equation for the reaction. This is given below:
N2 + 3H2 —> 2NH3
Step 2:
Determination of the number of moles of NH3 produced by the reaction of 2.51 moles of N2. This is illustrated below:
From the balanced equation above,
1 mole of N2 reacted to produce 2 moles of NH3.
Therefore, 2.51 moles of N2 will react to produce = (2.51 x 2)/1 = 5.02 moles of NH3.
Therefore, 5.02 moles of NH3 is produced from the reaction.
Step 3:
Conversion of 5.02 moles of NH3 to grams. This is illustrated below:
Molar mass of NH3 = 14 + (3x1) = 17g/mol
Number of mole of NH3 = 5.02 moles
Mass of NH3 =..?
Mass = mole x molar Mass
Mass of NH3 = 5.02 x 17
Mass of NH3 = 85.34g
Therefore, 85.34g of NH3 is produced.
What is the molar mass of P2O5?
Answer:
142 grams
Explanation:
To find the molar mass of a molecule or compound, you simply need to add together the molar masses of all of the atoms that comprise it. Phosphorus has a molar mass of about 31, while oxygen has one of about 16, meaning that the molar mass of this molecule is:
2(31)+5(16)=62+80=142
Hope this helps!
At 25 °C, what is the hydroxide ion concentration, [OH−] , in an aqueous solution with a hydrogen ion concentration of [H+]=1.9×10−9 M?
Answer:
The correct answer will be "5.26 × 10⁻⁶".
Explanation:
The given values is:
[tex][H^{+}]=1.9\times 10^{-9} M[/tex]
As we know,
⇒ [tex]pH+pOH=14[/tex]
On taking log, we get
⇒ [tex]-log[H^{+}] + -log[OH^{-}] = 14[/tex]
Now,
Taking "log" as common, we get
⇒ [tex]log[H^{+}][OH^{-}]= -14[/tex]
⇒ [tex][H^{+}][OH^{-}]= 10^{-14}[/tex]
⇒ [tex][OH^{-}]=\frac{10^{-14}}{[H^{+}]}[/tex]
On putting the estimated value of "[tex][H^{+}][/tex]", we get
⇒ [tex]=\frac{10^{-14}}{1.9\times 10^{-9}}[/tex]
⇒ [tex]=5.26\times 10^{-6}[/tex]
The functional groups in an organic compound can frequently be deduced from its infrared absorption spectrum. A compound containing C, H, and O exhibits intense absorption at 1720 cm-1. No additional information is available. List possible classes for which there is positive evidence.
Relative absorption intensity: (s)=strong, (m)=medium, (w)=weak.
What functional class(es) does the compound belong to?
List only classes for which evidence is given here. Attach no significance to evidence not cited explicitly.
Do not over-interpret exact absorption band positions. None of your inferences should depend on small differences like 10 to 20 cm-1.
a. alkane (List only if no other functional class applies.)
b. alkene h. amine
c. terminal alkyne i. aldehyde or ketone
d. internal alkyne j. carboxylic acid
e. arene k. ester
f. alcohol l. nitrile
g. ether
Answer:
The class of this compound is aldehyde or ketone (i).
Explanation:
Absorption peak at 1720 cm-1 shows the presence of a carbonyl group, possibly an aldehyde or ketone with C=O bond.
Further information on molecular formula would be required for structural elucidation.
Water was poured over a large oil fire to extinguish it. What would happen and why?
Answer:
I think that the fire will continue burning, because the oil and water don't mix and the water is heavier (denser) than oil, so the oil will go up and the fire with it. That's why because the gas station have sand instead of water
Water is heavier than oil. Because oil is lighter and immiscible with water, it will form a separate layer above the surface of the water and continue to burn when water is poured on a large oil fire. As a result, the fire won't be put out.
What happens when you pour water on an oil fire?A small amount of water will instantly sink to the bottom of a pan or deep fryer filled with hot, burning oil and explode there. The Scientific American claims that the characteristics of oils explain why they do not mix with water.
Oil or petroleum-related fires cannot be put out with water. Water sinks below the oil because it is heavier than oil and does not float, allowing the fire to continue to burn. Oil and petroleum fires can be put out with fire extinguishers or sand.
The temperature of the burning substance is lowered by water. The fire goes out when the temperature drops below the burning substance's ignition temperature. Here, the water serves as an acclimatizer.
Thus, it will form a separate layer above the surface of the water and continue to burn when water is poured on a large oil fire.
To learn more about the oil fire, follow the link;
https://brainly.com/question/15173100
#SPJ6
When 25ml of sulphuric acid, was titrated with 0.0820 mol/L sodium hydroxide solution the end point was detected (with phenolphthalein) at 22.5ml . Calculate the concentration of sulphuric
acid in mol/L.
Answer:
the concentration of sulphuric acid is 14mol/l
1. ______The force that keeps the nucleons bound inside the nucleus of an atom
A. Strong electrostatic force
B. Strong nuclear force
C. Strong centripetal force
D. Gravitational attraction
2._____The amount of energy needed to split the nucleus into individual protons and neutrons
A. Nuclide transfer energy
B. Nuclear binding energy
C. Mass energy equivalence
D. Nuclear energy
3._______ The difference between the mass of the nucleons and the mass of an Atom
A. Mass of nucleus
B. Mass defect
C. Atomic mass
D. Isotopic mass
Answer:
1). strong nuclear force 2). nuclear binding energy 3), mass defect
Explanation:
Right on Edge
1. Strong nuclear force the force that keeps the nucleons bound inside the nucleus of an atom.
2. Nuclear binding energy the amount of energy needed to split the nucleus into individual protons and neutrons.
3. Mass defect the difference between the mass of the nucleons and the mass of an Atom.
What is strong nuclear force ?The term strong nuclear force is defined as the force that binds protons and neutrons together. It also binds them all together in a nucleus and is responsible for the energy released in nuclear reactions.
The examples of strong nuclear force are the force that hold protons and neutrons in nuclei of atoms. The elements' greater than the hydrogen atom. The fusion of hydrogen into helium in the sun's core.
Thus, 1. option B, 2. option B and 3. option B is correct.
To learn more about the strong nuclear force, follow the link;
https://brainly.com/question/19271485
#SPJ2
Calculate the pH of a 0.020 M H2CO3 solution. At 25 °C, Ka1 = 4.3 × 10-7. H2CO3(aq) + H2O(l) ↔ H3O+(aq) + HCO3-(aq)
Answer:
Explanation:
H₂CO₃(aq) + H₂O(l) ↔ H₃O⁺(aq) + HCO₃⁻(aq)
Let d be the degree of dissociation
.02( 1-d ) .02d .02d
Dissociation constant Ka₁ is given
4.3 x 10⁻⁷ = .02d x .02d / .02( 1-d )
= .004 d² / .02 ( neglecting d in denominator )
= .02 d²
d² = 215 x 10⁻⁷
d = 4.636 x 10⁻³
= .004636
concentration of H₃O⁺
= d x .02
= .004636 x .02
= 9.272 x 10⁻⁵
pH = - log [ H₃O⁺ ]
= - log ( 9.272 x 10⁻⁵ )
5 - log 9.272
= 5 - .967
= 4.033 .
The functional groups in an organic compound can frequently be deduced from its infrared absorption spectrum. A compound containing C, H, and O exhibits broad absorption at 3450 cm^-1 (m) and an intense band at 1725, plus a band at 1100 cm^-1 (m). Relative absorption intensity: (s) = strong, (m) = medium, (w) = weak.
What functional class(es) does the compound belong to?
List only classes for which evidence is given here. Attach no significance to evidence not cited explicitly. Do not over-interpret exact absorption band positions. None of your inferences should depend on small differences like 10 to 20 cm^-1.
The functional class(es) of this compound is(are)________. (Enter letters from the table below, in any order, with no spaces or commas.)
a. alkane (List only if no other functional class applies.)
b. alkene h. amine
c. terminal alkyne i. aldehyde or ketone
d. internal alkyne j. carboxylic acid
e. arene k. ester
f. alcohol l. nitrile
g. ether
Answer:
The functional class(es) of this compound is(are):
alcoholcarboxylic acidesterExplanation:
3450 cm-1 is indicative of OH stretching
1725 cm-1 is indicative of carbonyl group C=O
1100cm-1 shows carbon is bonded to electronegative element e.g C-O
Further information on molecular formula is required for proper structural elucidation
Empirical formula for compound of 2.17 mol N and 4.35 mol O
Answer:
Explanation:
ratio of moles of N and O in molecule =
N / O = 2.17 / 4.35
1/2
empirical formula = NO₂
A gas company in Massachusetts charges $2.80 for 15.0 ft3 of natural gas (CH4) measured at 20.0°C and 1.00 atm. Calculate the cost of heating 2.00 × 102 mL of water (enough to make a cup of coffee or tea) from 20.0°C to 100.0°C. Assume that only 50.0% of the heat generated by the combustion is used to heat the water; the rest of the heat is lost to the surroundings. Assume that the products of the combustion of methane are CO2(g) and H2O(l).
Answer:
$0.0238
Explanation:
The energy you need to increase the temperature of water from 20°C to 100°C is obtained from:
Q = C×m×ΔT
Where Q is the energy, C is specific heat of water (4.184J/g°C), m is mass of water (2.00x10²g - Density of water 1g/mL), ΔT is change in temperature (100.0°C - 20.0°C)
Replacing:
Q = 4.184J/g°C × 2.00x10²g × 80.0°C
Q = 66944J = 66.944kJ
As you are assuming the energy of combustion will be just 50.0% to heat the water the energy you need is 66.944kJ × 2 = 133.888kJ
The combustion of methane is:
CH4(g) + 2O2(g) ⟶ CO2(g) + 2H2O(l) ΔH = −890.8kJ
That means 1 mole of methane produce 890.8kJ. As you need 133.888kJ, moles of methane are:
133.888kJ × (1 mol CH₄ / 890.8kJ) = 0.150 moles of CH₄.
Using PV = nRT, moles of 15.0ft³ (424.8L) at 20.0°C (293.15K) and 1.00atm:
1.00atmₓ424.8L = moles CH₄ₓ0.082atmL/molKₓ293.15K
17.67 = moles CH₄
As 17.67 moles of CH₄ cost $2.80, the cost of 0.150 moles of CH₄ is:
0.150 moles CH₄ ₓ ($2.80 / 17.67 moles) =
$0.0238What is the mass of 3.75 moles of NaCI? ( Na= 22.99g/mol, CI= 35.45 g/mol)
Answer:
219.15 grams
Explanation:
What is the mass of 3.75 moles of NaCI? ( Na= 22.99g/mol, CI= 35.45 g/mol)
Mole of Na = 22.99g
Mole of Cl = 35.45g
For NaCl we have ratio of 1:1, so we have 1 Na for every Cl
So we just add the two together to get the molar mass of NaCl which is
22.99 + 35.45 = 58.44g/mol
And we know we have 3.75 moles of NaCl so we multiply that by the molar mass of NaCl to get our answer
3.75 x 58.44 = 219.15grams
How many protons are in an ion with 36 electrons and a -1 charge
Answer:
Explanation:
There are 35 protons.
The number of electrons = 36 electrons gives a -1 charge.
Where did all the other minus charges go?
They must be balanced by 35 protons.
An ideal gas sealed in a rigid 4.86-L cylinder, initially at pressure Pi=10.90 atm, is cooled until the pressure in the cylinder is Pf=1.24 atm. What is the enthalpy change for this process? ΔH =
Answer:
[tex]\Delta H=-11897J[/tex]
Explanation:
Hello,
In this case, it is widely known that for isochoric processes, the change in the enthalpy is computed by:
[tex]\Delta H=\Delta U+V\Delta P[/tex]
Whereas the change in the internal energy is computed by:
[tex]\Delta U=nCv\Delta T[/tex]
So we compute the initial and final temperatures for one mole of the ideal gas:
[tex]T_1= \frac{P_1V}{nR}=\frac{10.90atm*4.86L}{0.082*n}=\frac{646.02K }{n} \\\\T_2= \frac{P_2V}{nR}=\frac{1.24atm*4.86L}{0.082*n}=\frac{73.49K }{n}[/tex]
Next, the change in the internal energy, since the volume-constant specific heat could be assumed as ³/₂R:
[tex]\Delta U=1mol*\frac{3}{2} (8.314\frac{J}{mol*K} )*(73.49K-646.02K )=-7140J[/tex]
Then, the volume-pressure product in Joules:
[tex]V\Delta P=4.86L*\frac{1m^3}{1000L} *(1.24atm-10.90atm)*\frac{101325Pa}{1atm} \\\\V\Delta P=-4756.96J[/tex]
Finally, the change in the enthalpy for the process:
[tex]\Delta H=-7140J-4757J\\\\\Delta H=-11897J[/tex]
Best regards.
The change in enthalpy is 70.42J
Data;
Volume of the gas = 4.86LInitial Pressure = 10.90 atmFinal Pressure = 1.24 atmChange in Enthalpy = ?Change in EnthalpyThe change of enthalpy is calculated as
[tex]\delta H = \delta V + \delta nRT\\\delta n = 0\\\delta H = \delta U \\[/tex]
The volume change is negligible
The change in enthalpy here is equal to change in internal energy over ΔE
[tex]\delta H = \delta U = nCv\delta T\\\delta H = \frac{3}{2}(nR\delta T)\\\delta H = \frac{3}{2}\{\delta PV)\\ \delta H = \frac{3}{2}[(10.90-1.24)*4.86] \\\delta H = 70.42J[/tex]
The change in enthalpy is 70.42J
Learn more on change in enthalpy here;
https://brainly.com/question/14047927
In general,for a gas at a constant volume?
Answer:
The pressure of a gas is directly proportional to its Kelvin temperature if the volume is kept constant. At constant volume and temperature, the total pressure exerted by a mixture of gases is equal to the sum of the partial pressures of the component gases.
Explanation:
A student sets up the following equation to solve a problem in solution stoichiometry. (The ? stands for a number the student is going to calculate.) Enter the units of the student's answer
(1.26mol)1mL10^−3L / (7.9mol/L)= ?
Answer:
mL * L²
Explanation:
The question in t his problem is to calculate the units of the final answer.
The units in the numerator is mol, ml and L.
The unit in the denominator is mol/L
This leads us to;
Numerator / Denominator = mol * mL * L / (mol / L )
The final units is mL * L²
A student sets up the following equation to convert a measurement. (The ? stands for a number the student is going to calculate.) Fill in the missing part of this equation. Note: your answer should be in the form of one or more fractions multiplied together. (23. Pa cm^3)____?kPa . m^3
Answer:
The correct answer will be "-6.7 × 10¹⁰ kg.m/s".
Explanation:
The required conversions are:
⇒ [tex]1 \ kg=1000 \ g[/tex]
⇒ [tex]1 \ m=100 \ cm[/tex]
Now,
The complete conversion will be:
= [tex][-6.7\times 10^5 \ \frac{kg \ m}{s} ]\times [\frac{10^3 \ g}{kg}\times \frac{10^2 \ cm}{1 \ m}][/tex]
On cancelling the terms, we get
= [tex]-6.7\times 10^{10} \frac{kg \ m}{s}[/tex]
So that the missing terms will be [tex][\frac{10^3 \ g}{kg}\times \frac{10^2 \ cm}{1 \ m}][/tex] and [tex][-6.7\times 10^{10}\frac{kg \ m}{s}][/tex]
How many moles of h2 can be formed if a 3.25g sample of Mg reacts with excess HCl
Answer:
0.134 moles of H₂ can be formed if a 3.25g sample of Mg reacts with excess HCl
Explanation:
The balanced reaction is:
Mg + 2 HCl → MgCl₂ + H₂
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles react:
Mg: 1 moleHCl: 2 molesMgCl₂: 1 moleH₂: 1 moleBeing:
Mg: 24. 31 g/moleH: 1 g/moleCl: 35.45 g/molethe molar mass of the compounds participating in the reaction is:
Mg: 24.31 g/moleHCl: 1 g/mole + 35.45 g/mole= 36.45 g/moleMgCl₂: 24.31 g/mole + 2*35.45 g/mole= 95.21 g/moleH₂: 2*1 g/mole= 2 g/moleThen, by stoichiometry of the reaction, the following quantities of mass participate in the reaction:
Mg: 1 mole* 24.31 g/mole= 24.31 gHCl: 2 moles* 36.45 g/mole= 72.9 gMgCl₂: 1 mole* 95.21 g/mole= 95.21 gH₂: 1 mole* 2 g/mole= 2 gThen you can apply the following rule of three: if by stoichiometry 24.31 grams of Mg form 1 mole of H₂, 3.25 grams of Mg how many moles of H₂ will they form?
[tex]moles of H_{2} =\frac{3.25 grams of Mg*1 mole of H_{2} }{24.31 grams of Mg}[/tex]
moles of H₂= 0.134
0.134 moles of H₂ can be formed if a 3.25g sample of Mg reacts with excess HCl
0.134 moles of H₂ are formed by the reaction of 3.25 g of Mg with excess HCl.
Let's consider the balanced equation between Mg and HCl.
Mg + 2 HCl ⇒ MgCl₂ + H₂
The molar mass of Mg is 24.3 g/mol. The moles corresponding to 3.25 g of Mg are:
[tex]3.25 g \times \frac{1mol}{24.3g} = 0.134 mol[/tex]
The molar ratio of Mg to H₂ is 1:1. The moles of H₂ formed by 0.134 moles of Mg are:
[tex]0.134 mol Mg \times \frac{1molH_2}{1molMg} = 0.134molH_2[/tex]
0.134 moles of H₂ are formed by the reaction of 3.25 g of Mg with excess HCl.
Learn more: https://brainly.com/question/9743981
A sample of chemical X is found to contain 5.0 grams of oxygen, 10.0 grams of carbon, and 20.0 grams of nitrogen. The law of definite proportion would predict that a 75 gram sample of chemical X should contain how many grams of carbon
Answer: 75 grams sample of chemical X should contain 21.43 grams of carbon
Explanation: The law of definite proportion states that a given chemical compound always contains its component elements in fixed ratio.
From the question, chemical X contains 5.0 grams of oxygen, 10.0 grams of carbon, and 20.0 grams of nitrogen.
Sum up the masses
5.0g + 10.0g + 20.0g = 35.0g
This means, 10.0 grams of carbon are present in 35.0 grams of chemical X.
Now, to the determine the mass of carbon that 75 gram sample of chemical X should contain,
According to the law of definite proportion, the component elements of a given chemical compound are in fixed ratio. Therefore,
If 35.0g of chemical X contains 10.0g of carbon
Then, 75 g of chemical X will contain
(75 × 10) / 35 g
= 21.43 grams
Hence, 75 grams sample of chemical X should contain 21.43 grams of carbon.
Answer:
According to the law of definite proportion, a 75 gram sample of chemical X should contain 21.249 grams of carbon.
Explanation:
The total mass of the sample is equal to the sum of masses of oxygen, carbon and nitrogen. That is:
[tex]m_{tot} = m_{O} + m_{C} + m_{N}[/tex]
If [tex]m_{O} = 5\,g[/tex], [tex]m_{C} = 10\,g[/tex] and [tex]m_{N} = 20\,g[/tex], then:
[tex]m_{tot} = 35\,g[/tex]
According to the law of definite proportion, the following simple rule of three is used:
[tex]m_{C'} = m_{C} \times \frac{m_{tot'}}{m_{tot}}[/tex]
If [tex]m_{C} = 10\,g[/tex], [tex]m_{tot} = 35\,g[/tex] and [tex]m_{tot'} = 75\,g[/tex], then:
[tex]m_{C'} = 10\,g\times \frac{75\,g}{35\,g}[/tex]
[tex]m_{C'} = 21.429\,g[/tex]
According to the law of definite proportion, a 75 gram sample of chemical X should contain 21.249 grams of carbon.
symbol for carboxylic acid
What are the number of protons, neutrons, and electrons in 19 F
9?
Answer:
This isotope of fluorine has 9 protons, 9 electrons and 10 neutrons.
Explanation:
Explain, in terms of charge distribution, why a molecule of carbon tetrachloride is a nonpolar molecule.
Answer:
Explanation:
The covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas.
The covalent bond between two atoms can be polar or nonpolar. If the atoms are equal, the bond will be nonpolar (since no atom attracts electrons more strongly). But, if the atoms are different, the bond will be polarized towards the most electronegative atom, because it will be the atom that attracts the electron pair with more force. Then it will be polar.
It can occur in a molecule that the bonds are polar and the molecule is nonpolar. This occurs because of the geometry of the molecule, which causes them to cancel the different equal polar bonds of the molecule.
In carbon tetrachloride the bonds are polar, but the tetrahedral geometry of the molecule causes all four dipoles to cancel out and the molecule to be apolar.
The carbon tetrachloride s CCL4 is a carbon molecule and four chloride molecule's. The carbon tetrachloride is a nonpolar, as the dipole movement of the molecules ae evenly spaced around the central carbon atom.
As polarity is a result of the geometric sum of the bond dipoles. The bond has separate charges. It's nonpolar because the charge is symmetrically distributed.Hence the carbon tetrachloride happens to be a nonpolar molecular.
Learn more about the in terms of charge distribution, why a molecule.
brainly.com/question/11858200.
In the activity, click on the Keq and ΔG∘ quantities to observe how they are related. Calculate ΔG∘using this relationship and the equilibrium constant (Keq) obtained in Part A at T=298K:Keq=1.24×1020Express the Gibbs free energy (ΔG∘) in joules to three significant figures.
Answer: The Gibbs free energy of the reaction is -114629.4 J
Explanation:
To calculate the Gibbs free energy of the reaction, we use the equation:
[tex]\Delta G^o=-RT\ln K_{eq}[/tex]
where,
[tex]\Delta G^o[/tex] = Gibbs free energy of the reaction = ?
R = Gas constant = [tex]8.314 J/K.mol[/tex]
T = temperature of the reaction = 298 K
[tex]K_{eq}[/tex] = equilibrium constant of the reaction = [tex]1.24\times 10^{20}[/tex]
Putting values in above equation, we get:
[tex]\Delta G^o=-(8.314J/mol.K\times 298K\times \ln (1.24\times 10^{20}))\\\\\Delta G^o=-114629.4J[/tex]
Hence, the Gibbs free energy of the reaction is -114629.4 J
How is the mass of the atom calculated?
by adding the number of protons and electrons
by adding the number of protons and neutrons
by subtracting the number of electrons from the number of protons
by adding the number of neutrons and electrons
The mass of the atom is calculated by adding the number of protons and neutrons .
What do you mean by atomic mass of an element ?The total mass of one atom of an element is defined as its atomic mass. The atomic mass is taken as the mass of protons and neutrons in an atom.
1 a m u = 1.66 ×10⁻²⁴g
To calculate the atomic mass of an element -:
The atomic mass of the single atom can be calculated by adding the total number of protons and the total number of neutrons of that particular atom.
Atomic mass Number = Number of protons + number of neutrons
Hence ,in this way the atomic mass is calculated of an atom .
Learn more about atomic mass ,here:
https://brainly.com/question/17067547
#SPJ5
Which of the following is a property of matter?
The major properties of matter are volume, mass, and shape.
All matter however too is made up of tiny particles known as atoms.
Other characteristics properties of matter which can be measured include object's density, color, length, malleability, melting point, hardness, odor, temperature, and others
Learn more about matter:
https://brainly.com/question/11987405
The property of matter should be volume, mass, and shape.
The following information should be considered:
The matter should be made up of small & tiny particles that we called as the atoms. It involved the density of an object, length, temperature, melting point, etc.Learn more: https://brainly.com/question/1979431?referrer=searchResults
How has human action affected the
population?
Answer:
Human action has affected the population in quite a negative way. Technological innovations and urbanization gave rise to a high degree of pollution on the land, air and water.
Emission of hydrocarbons from automobiles and factories are known to pollute and cause sicknesses related to the respiratory system thereby shortening the lifespan of humans. Pollution of water bodies also cause death of sea animals and thereby reducing food availability of humans.
complite the following reactions. NaOH(aq)+FeBr3(aq)→
Answer:
3NaOH+FeBr3>3NaBr+
Fe(OH)3
Explanation:
After writing the equation it has to be balanced
Is chemical engineering suits for a person who gets bored fast and needed to learn new things?
Answer:
yes
Explanation:
because it will keep them entertained and will learn new things
Of the following three atoms, one tends to lose three electrons, another tends to lose two electrons, and another tends to lose one electron. Rank these atoms in order of the number of electrons they tend to lose, from most to fewest: potassium, K; calcium, Ca; gallium, Ga. Rank from most to fewest.
Answer: Ga > Ca > K
Explanation:
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom.
The electrons are filled according to Afbau's rule in order of increasing energies. The metals tend to get stable by losing electrons to attain noble gas configuration.
[tex]K:19:1s^22s^22p^63s^23p^64s^1[/tex]
[tex]K^+:18:1s^22s^22p^63s^23p^6[/tex]
[tex]Ca:20:1s^22s^22p^63s^23p^64s^2[/tex]
[tex]Ca^{2+}:18:1s^22s^22p^63s^23p^6[/tex]
[tex]Ga:31:1s^22s^22p^63s^23p^64s^23d^{10}4s^24p^1[/tex]
[tex]Ga^{3+}:28:1s^22s^22p^63s^23p^64s^23d^{10}[/tex]
Thus gallium (Ga) loses three electrons, Calcium (Ca) loses 2 electrons and Potassium (K) loses one electron.
What is Keq for the reaction 2HCl(9) = H2(g) + Cl2(g)?
Answer:
Keq= [(Cl2) (H2)] / (HCl)^2
Explanation:
Equilibrium Constant, Keq, is written as products/reactants.
So it's going to be Keq= [(Cl2) (H2)] / (HCl)^2
