Answer:
The volume of 9.0 M copper (II) sulfate stock solution needed to prepare 3.0 L of a 5.0 M solution is 1.667 L
Explanation:
Dilution is a process by which the concentration of a solute in solution is reduced by adding more solvent.
In other words, dilution is the procedure followed to prepare a less concentrated solution from a more concentrated one, and it simply consists of adding more solvent.
In a dilution the amount of solute does not vary. What varies in a dilution is the volume of the solvent: as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
The equation used in this case is:
Ci * Vi = Cf * Vf
where
Ci: initial concentration
Vi: initial volume
Cf: final concentration
Vf: final volume
In this case:
Ci: 9 M
Vi: ?
Cf: 5 M
Vf: 3 L
Outline the best method for preparing the following aldehyde from an appropriate alcohol in one step. Draw the starting alcohol and select the best reagent.
The structure is a 6 carbon ring where carbon 1 is bonded to an aldehyde
To prepare the desired aldehyde with a 6-carbon ring and an aldehyde group on carbon 1, starting with cyclohexanol is a suitable approach.
Cyclohexanol is a 6-carbon ring compound with an alcohol group (OH) attached to carbon 1. To convert the alcohol group into an aldehyde group, the oxidation of the primary alcohol is required.
In this case, the best reagent to use for the oxidation of cyclohexanol to the corresponding aldehyde is PCC (pyridinium chlorochromate).
PCC is a mild oxidizing agent that selectively oxidizes primary alcohols to aldehydes without further oxidation to carboxylic acids. It allows for a controlled oxidation, preventing overoxidation of the aldehyde to a carboxylic acid.
The reaction using PCC as the oxidizing agent can be carried out in one step. The PCC reagent is typically dissolved in a suitable solvent, and the cyclohexanol is added to the reaction mixture.
The reaction proceeds, converting the alcohol group to an aldehyde group while maintaining the 6-carbon ring structure.
By using cyclohexanol as the starting alcohol and PCC as the reagent, you can achieve the desired aldehyde product with a 6-carbon ring and an aldehyde group on carbon 1 in a single step.
This method provides a reliable and efficient way to selectively oxidize the primary alcohol to the corresponding aldehyde without the risk of overoxidation.
To learn more about oxidation, refer below:
https://brainly.com/question/16976470
#SPJ11
YALL HELP ASAP
1) If big molecules can't get absorbed in the small intestine, why aren't there other big molecules besides fiber, like complex carbohydrates, coming out in the poop of healthy people?
2) What's happening to the other big molecules like complex carbohydrates? How can we explain why the amount of complex carbohydrates could be decreasing as food travels through the digestive system?
WHATS THE ANSWER TO THESE PLS HELPME
1) The reason why other big molecules, such as complex carbohydrates, don't usually come out in the feces of healthy people is because they are broken down into smaller, absorbable units during the digestive process.
If big molecules can't get absorbed in the small intestine, why aren't there other big molecules besides fiber, like complex carbohydrates, coming out in the poop of healthy people:
Complex carbohydrates are broken down into simple sugars like glucose through the action of enzymes such as amylase, which is present in saliva and pancreatic secretions. These simple sugars can then be absorbed by the small intestine and used by the body for energy. In contrast, fiber cannot be broken down by human digestive enzymes, so it remains undigested and is eliminated in the feces.
2) What's happening to the other big molecules like complex carbohydrates? How can we explain why the amount of complex carbohydrates could be decreasing as food travels through the digestive system?
As food travels through the digestive system, complex carbohydrates are gradually broken down into smaller, absorbable units. This process begins in the mouth with the action of salivary amylase, which starts breaking down the complex carbohydrates into smaller units. As the food continues to the stomach and then to the small intestine, more enzymes, like pancreatic amylase, are secreted to further break down the complex carbohydrates into simple sugars. These simple sugars are then absorbed by the small intestine and enter the bloodstream, where they can be used for energy or stored for later use. This is why the amount of complex carbohydrates decreases as food travels through the digestive system.
To know more about digestive system:
https://brainly.com/question/29694477
#SPJ11
Research the history of DNA analysis in forensic science and create a timeline to show its evolution over the years
DNA analysis has revolutionized forensic science in the past few decades. It has become an indispensable tool for crime scene investigations, identifying suspects, and exonerating the innocent.
The history of DNA analysis dates back to 1984, when British geneticist Alec Jeffreys developed the technique of DNA fingerprinting. He used variable number tandem repeats (VNTRs) to create a unique DNA profile for each individual.
In 1986, DNA analysis was first used in a cri-minal case, where it was used to exonerate a man who had been wrongly convicted of ra-pe and mu-rder. Since then, DNA analysis has been used in several high-profile cases, such as the OJ Simpson trial in 1995 and the identification of 9/11 victims in 2001.
The technique of DNA fingerprinting evolved over the years, with the development of polymerase chain reaction (PCR) and short tandem repeats (STRs) in the 1990s. PCR enabled amplification of DNA samples, while STRs provided greater discrimination power in creating unique DNA profiles.
The first DNA database was established in the UK in 1995, followed by the US in 1998. Today, DNA databases are used worldwide for identifying suspects and matching DNA samples to cri-me scenes.
The latest advancements in DNA analysis include next-generation sequencing (NGS), which can analyze entire genomes, and mitochondrial DNA analysis, which can identify maternal lineage.
In conclusion, DNA analysis has come a long way since its inception in the 1980s. It has become an essential tool for forensic investigations and has contributed significantly to the justice system. The technique continues to evolve, and future advancements in DNA analysis will undoubtedly improve its effectiveness and accuracy.
To know more about DNA analysis, visit:
https://brainly.com/question/19340987#
#SPJ11
In air, nitric oxide gas reacts with oxygen to produce nitrogen dioxide,
which appears brown in color:
2 no(g) + o2(g) = 2no,(9)
what mass in grams of nitrogen dioxide would be produced by the
complete reaction of 0.551 grams of nitric oxide gas?
The complete reaction of 0.551 grams of nitric oxide gas would produce 0.846 grams of nitrogen dioxide.
The given chemical equation shows that 2 moles of nitric oxide (NO) gas reacts with 1 mole of oxygen (O2) gas to produce 2 moles of nitrogen dioxide (NO2). Therefore, the stoichiometric ratio of NO to NO2 is 2:2 or 1:1. This means that for every 1 mole of NO gas, 1 mole of NO2 gas is produced.
To determine the mass of NO2 produced from 0.551 grams of NO gas, we need to first convert the mass of NO into moles using its molar mass. The molar mass of NO is 30.01 g/mol (14.01 g/mol for N and 16.00 g/mol for O).
0.551 g of NO is equivalent to 0.551 g / 30.01 g/mol = 0.0184 moles of NO.
Since the stoichiometric ratio of NO to NO2 is 1:1, the number of moles of NO2 produced will also be 0.0184 moles.
The molar mass of NO2 is 46.01 g/mol (14.01 g/mol for N and 2 x 16.00 g/mol for 2 O atoms).
Therefore, the mass of NO2 produced will be:
0.0184 moles x 46.01 g/mol = 0.846 grams.
Hence, the complete reaction of 0.551 grams of nitric oxide gas would produce 0.846 grams of nitrogen dioxide.
To know more about nitric oxide, visit:
https://brainly.com/question/31737620#
#SPJ11
10 ml graduated cylinder (mL stands for milliliter)
• gram scale
• Water
• 6 metal paper clips of the same size and material
Part A
Use the gram scale to measure the mass of the empty graduated cylinder, and record the value
A graduated cylinder is a piece of laboratory equipment used for measuring the volume of liquids, and in this case, it has a capacity of 10 ml.
The gram scale, on the other hand, is a device used for measuring the mass of objects and materials. To begin the experiment, you will need to first measure the mass of the empty graduated cylinder using the gram scale. This will give you a baseline measurement for the weight of the cylinder without any additional substances. You should record this value for future reference.
Next, you will need to fill the graduated cylinder with water up to the 10 ml mark. This can be done by slowly pouring the water into the cylinder until the level reaches the desired volume.
After filling the cylinder with water, you will need to measure the mass of the cylinder and the water together using the gram scale. Subtract the mass of the empty cylinder from the total mass to find the mass of the water.
Finally, you will need to add the six metal paper clips of the same size and material to the cylinder and measure the mass again. This will allow you to determine the difference in mass between the water and the paper clips.
Overall, this experiment demonstrates the use of laboratory equipment to measure the volume and mass of substances, and highlights the importance of accurate measurements in scientific research.
For more about graduated cylinder:
https://brainly.com/question/26173436
#SPJ11
What is the molarity of a solution if 1. 75 moles of KOH are dissolved in 2. 5 liters of water а 39 М с 0. 70 М b. 1А М d 4. 4M А В ОООО
To calculate the molarity of a solution, we need to know the number of moles of solute and the volume of the solution in liters.
a. 39 M solution with 0.70 M KOH:
Number of moles of KOH = 0.70 moles/Liter x 2.5 Liters = 1.75 moles
Volume of solution = 2.5 Liters
Molarity of solution = Number of moles of solute / Volume of solution = 1.75 moles / 2.5 Liters = 0.70 M
b. 1 A solution:
This question is incomplete, as it is not specified what solute is dissolved in the solution. Therefore, it is not possible to calculate the molarity of the solution without this information.
c. 4.4 M solution of ABOOOO:
It is not possible to calculate the molarity of this solution without more information about the solute dissolved in the solution. The chemical formula or name of the solute is needed to determine the number of moles present in the solution.
To know more about Molarity refer to-
https://brainly.com/question/16587536
#SPJ11
A) Why weight of water is converted to true volume. What are the three corrections that are considered?
The weight of water is converted to true volume because the volume of water can be affected by temperature, pressure, and dissolved impurities. The three corrections that are considered are thermal expansion correction, atmospheric pressure correction, and dissolved impurities correction.
The thermal expansion correction takes into account the fact that water expands or contracts with temperature changes. As the temperature of water increases, its volume increases, and vice versa. The correction factor is calculated based on the temperature of the water and the coefficient of thermal expansion of water.
The barometric or atmospheric pressure correction is applied because the pressure of the surrounding air can affect the volume of water. The correction factor is calculated based on the atmospheric pressure and the vapor pressure of water at the given temperature.
The dissolved impurities correction is applied because dissolved substances, such as salts or gases, can also affect the volume of water. The correction factor is calculated based on the concentration of dissolved substances in the water.
To know more about thermal expansion, refer here:
https://brainly.com/question/14092908#
#SPJ11
In a different method of obtaining nickel, the process produces a mixture of the liquids nickel tetracarbonyl and iron pentacarbronyl.
The boiling point of nickel tetracarbonyl is 43°
the boiling point of iron pentacarbonyl is 103°
these two liquids mix together completely.
Describe the process used to separate these two liquids. (3 marks)
One possible process to separate nickel tetracarbonyl and iron pentacarbonyl is fractional distillation. Since the boiling points of the two liquids are different, the process can take advantage of this difference to separate the components.
Fractional distillation works by heating the mixture in a distillation apparatus, which causes the liquids to vaporize. The vapor is then condensed back into a liquid and collected. However, the composition of the vapor is not uniform, with more volatile components having a higher concentration.
By using a fractionating column, which contains many plates or packing material, the vapor is forced to condense and evaporate multiple times.
As the vapor travels up the column, the components with lower boiling points will vaporize and travel up more easily, while the components with higher boiling points will condense and fall back down more frequently. This process effectively separates the components based on their boiling points.
In the case of nickel tetracarbonyl and iron pentacarbonyl, the fractional distillation apparatus would be set up, and the mixture would be heated. As the vapor rises up the column, the nickel tetracarbonyl, with its lower boiling point, would vaporize and travel up the column more easily, while the iron pentacarbonyl would condense and fall back down more frequently.
The components can then be collected separately at the end of the apparatus, resulting in the separation of the two liquids.
To know more about fractional distillation refer to-
https://brainly.com/question/29037176
#SPJ11
Which has more particles a teaspoon of salt or teaspoon of sugar
A teaspoon of salt has more particles (approximately 6.20 x 10^22) than a teaspoon of sugar (approximately 7.41 x 10^21).
To compare the number of particles in a teaspoon of salt and a teaspoon of sugar, we need to understand the concept of moles.
A mole is a unit of measurement used to express the amount of a substance, and it corresponds to approximately 6.022 x 10^23 particles.
The number of moles in a given mass of a substance can be calculated using the formula:
moles = mass / molar mass.
The molar mass of common table salt (NaCl) is 58.44 g/mol, while the molar mass of table sugar (C12H22O11) is 342.3 g/mol.
Considering that a teaspoon of salt typically weighs about 6 grams and a teaspoon of sugar weighs about 4.2 grams, we can calculate the moles of each substance:
Moles of salt = 6 g / 58.44 g/mol ≈ 0.103 moles
Moles of sugar = 4.2 g / 342.3 g/mol ≈ 0.0123 moles
Now, to find the number of particles in each substance, we multiply the moles by Avogadro's number (6.022 x 10^23 particles/mol):
Particles of salt = 0.103 moles x 6.022 x 10^23 particles/mol ≈ 6.20 x 10^22 particles
Particles of sugar = 0.0123 moles x 6.022 x 10^23 particles/mol ≈ 7.41 x 10^21 particles
to know more about Avogadro's number refer here:
https://brainly.com/question/28812626#
#SPJ11
3. 70 mol CO2 has a volume of 25. 12 L at a pressure of 968 mmHg.
What is the temperature of the CO2 in °C?
70 mol CO2 has a volume of 25. 12 L at a pressure of 968 mmHg The temperature of the CO2 in °C is 4.231.1.
What is Temperature?A thermometer is a device that quantitatively measures a system's temperature. The word "temperature" refers to the average kinetic energy of an object, which is a type of energy associated with motion and used to define how hot or cold an object is.
Volume = 25.12 L. Pressure= 968 mm Hg.
Number of moles = 70 moles.
P = nRT/V
968 = 70 * T * 0.0821 / 25.12 L
968* 25.12/ 70 * 0.0821 = T
24316.16/ 5.747 = T
4.231.1 = T
Therefore, 70 mol CO2 has a volume of 25. 12 L at a pressure of 968 mmHg The temperature of the CO2 in °C is 4.231.1. The temperature of the CO2 in °C is 4.231.1
To Learn more about Temperature, refer to the link:
https://brainly.com/question/7510619
#SPJ6
A 983. 6 g sample of antimony undergoes a temperature change of +31. 51 °C. The specific heat capacity of antimony is 0. 049 cal/(g·°C). How many calories of heat were transferred by the sample?
The sample transferred 1,518.7 calories of heat.
First, we need to calculate the heat absorbed or released by the sample using the formula:
q = m * c * ∆T
where q is the heat transferred, m is the mass of the sample, c is the specific heat capacity of antimony, and ∆T is the temperature change.
Plugging in the values, we get:
q = 983.6 g * 0.049 cal/(g·°C) * 31.51 °C
q = 1,518.7 cal
Therefore, the sample transferred 1,518.7 calories of heat.
To know more about heat transfer refer here:
https://brainly.com/question/31065010
#SPJ11
In a boiling pot of water are a metal spoon and a wooden spoon of equal masses/size. Which spoon would likely be more painful (higher in temperature) to grab? Assume that both spoons have been in the same pot of boiling water for the same amount of time. Explain this phenomena using the following terms: Heat, Mass, Temperature, Specific Heat Capacity, Heat Flow. Consider all possible factors in your explanation
The metal spoon is hotter than the wooden spoon due to its higher mass,
Heat is the energy transferred from one body to another due to a temperature difference. The amount of heat transferred is proportional to the mass of the object and its specific heat capacity. Specific heat capacity is the amount of heat required to raise the temperature of one unit mass of the substance by one degree Celsius.
In this scenario, the two spoons are of equal size, but the metal spoon has a higher mass and specific heat capacity compared to the wooden spoon. When both spoons are placed in the boiling water, heat flows from the water to the spoons until they reach the same temperature as the water.
However, due to the higher mass and specific heat capacity of the metal spoon, it requires more heat energy to raise its temperature compared to the wooden spoon. As a result, the metal spoon takes a longer time to reach the same temperature as the wooden spoon.
Additionally, metals are better conductors of heat compared to wood. Therefore, the metal spoon conducts the heat more efficiently from the boiling water to the handle, making it hotter than the wooden spoon.
Overall, the metal spoon is hotter than the wooden spoon due to its higher mass, higher specific heat capacity, and better heat conduction properties. This is why it would be more painful to grab.
.
calculate the osmolarity of the following solutions, are these solutions hypotonic solution, isotonic solution, or hypertonic solution?
(a) osmolarity of 0.069 m na2co3 is ___, this solution is a ___ solution (hypotonic
hypertonic, or isotonic)
(b) osmolarity of 0.62 m ai(no3)3 is ___, this solution is a ___ solution
this solution is a
(c) osmolarity of a 0.30 m glucose (c6h1206) aqueous solution is ___, this solution is a ___ solution
(a) Osmolarity of 0.069 m na2co3 is 0.138 m, (b) osmolarity of 0.62 m ai(no3)3 is 1.86 m, (c) osmolarity of a 0.30 m glucose (c6h1206) aqueous solution is 0.30 m.
What is Osmolarity ?Osmolarity is a measure of the concentration of solutes in a solution. It is expressed as the number of osmoles (molecules or particles) of solutes per litre of solution. Osmolarity is an important factor in the body's ability to regulate the balance of water and electrolytes in the blood and other bodily fluids. It is also important for the absorption of nutrients from the intestines, and the maintenance of blood pressure. Osmolarity is measured using a special instrument called an osmometer.
To learn more about Osmolarity
https://brainly.com/question/14814464
#SPJ4
____SO2 + ____O2 →____SO3.
How many grams of oxygen are needed to produce 16.7 g of sulfur trioxide, SO3?
The mass (in grams) of oxygen are needed to produce 16.7 g of sulfur trioxide, SO₃ is 3.34 grams
How do i determine the mass of oxygen needed?First, we shall determine the mole of sulfur trioxide, SO₃ produced. Details below:
Mass of sulfur trioxide, SO₃ = 16.7 grams Molar mass of sulfur trioxide, SO₃ = 80 g/mol Mole of sulfur trioxide, SO₃ =?Mole = mass / molar mass
Mole of sulfur trioxide, SO₃ = 16.7 / 80
Mole of sulfur trioxide, SO₃ = 0.209 mole
Next, we shall determine the mole of oxygen needed. Details below:
2SO₂ + O₂ -> 2SO₃
From the balanced equation above,
2 mole of SO₃ was produced from 1 moles of O₂
Therefore,
0.209 mole of SO₃ will be produce from = 0.209 / 2 = 0.1045 mole of O₂
Finally, we shall detemine the mass of oxygen, O₂ needed. Details below:
Molar mass of O₂ = 32 g/mol Mole of O₂ = 0.1045 moleMass of O₂ = ?Mole = mass / molar mass
0.1045 = Mass of O₂ / 32
Cross multiply
Mass of O₂ = 0.0888 × 32
Mass of O₂ = 0.178 grams
Thus, that the mass of oxygen, O₂ needed is 3.34 grams
Learn more about mass:
https://brainly.com/question/21940152
#SPJ1
What is the molarity of a NaOH solution if 25. 0 mi is required to completely neutralize
40. 0 ml of a 1. 5 M solution of H2SO4?
The molarity of the NaOH solution is 1.2 M.
To calculate the molarity of the NaOH solution, first determine the moles of H₂SO₄, then determine the moles of NaOH needed for neutralization, and finally, calculate the molarity of NaOH. Here's a step-by-step explanation:
1. Calculate moles of H₂SO₄: Moles = Molarity × Volume = 1.5 M × 0.040 L = 0.060 moles H₂SO₄
2. Determine moles of NaOH needed for neutralization:
The balanced equation for the reaction is H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O. Based on the stoichiometry, 1 mole of H₂SO₄ reacts with 2 moles of NaOH, so 0.060 moles H₂SO₄ × 2 = 0.120 moles NaOH needed.
3. Calculate molarity of NaOH: Molarity = Moles / Volume = 0.120 moles NaOH / 0.025 L = 1.2 M NaOH solution.
To know more about balanced equation click on below link:
https://brainly.com/question/7181548#
#SPJ11
A man heats a balloon in the oven. If the balloon initially has a pressure of 860. 0 torr and
a temperature of 20. 0 °C, what will the temperature (in Kelvin) of the balloon be after he
increases the pressure to 3. 00 atm? (Hint: Convert to atmospheres). Do not include
units in your answer.
The temperature of the balloon after increasing the pressure to 3.00 atm is 608 K.
First, we need to convert the initial pressure from torr to atm, which is 860.0 torr/760 torr/atm = 1.13 atm.
Using the combined gas law, we can solve for the new temperature:
(P₁x V₁)/T₁ = (P₂x V₂)/T₂
Where P₁ = 1.13 atm, V₁ is constant, T₁ = 20.0 + 273.15 K (convert from Celsius to Kelvin), P₂ = 3.00 atm, and we want to solve for T₂.
Substituting the values and solving for T₂:
T₂ = (P₂ x V₁ x T₁)/(P₁ x V₂) = (3.00 atm x V1 x 293.15 K)/(1.13 atm x V₂)Since V₁ and V₂ are equal (since it is the same balloon), we can simplify to:
T₂ = (3.00 atm x 293.15 K)/1.13 atm = 608 KTherefore, the temperature of the balloon after increasing the pressure to 3.00 atm is 608 K.
To learn more about temperature, here
https://brainly.com/question/11464844
#SPJ4
How much nitrogen is needed to form 1. 4 mol of ammonia
To form 1.4 mol of ammonia, you need 0.7 mol of nitrogen.
Ammonia is formed by combining nitrogenand hydrogenin a 1:3 ratio, as shown in the balanced chemical equation:
N₂ + 3H₂ → 2NH₃
To determine the amount of nitrogen needed to form 1.4 mol of ammonia, follow these steps:
1. Identify the stoichiometry of the reaction: 1 mol N2 reacts with 3 mol H2 to produce 2 mol NH3.
2. Divide the desired amount of ammonia (1.4 mol) by the stoichiometric coefficient of ammonia (2 mol): 1.4 mol / 2 mol = 0.7.
3. Multiply the result (0.7) by the stoichiometric coefficient of nitrogen (1 mol): 0.7 x 1 mol = 0.7 mol.
Therefore, you need 0.7 mol of nitrogen to form 1.4 mol of ammonia.
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
Given that the specific heat capacities of ice and b. boiling point and vapor pressure
steam are 2.06 j/g °c and 2.03 j/g °c, respec- tively, and considering the information about
water given in exercise 22, calculate the total quantity of heat evolved when 10.0 g of steam at
200. °c is condensed, cooled, and frozen to ice at 50. °c.
The total quantity of heat evolved when 10.0 g of steam at 200°C is condensed, cooled, and frozen to ice at 50°C is 410.56 kJ.
To calculate the total quantity of heat evolved, we need to break down the process into different steps:
Step 1: Condensation of 10.0 g of steam at 200°C
The heat evolved during condensation can be calculated using the formula:
q = m × ΔHvap
where q is the heat evolved, m is the mass of steam, and ΔHvap is the molar heat of vaporization of water, which is 40.7 kJ/mol.
First, we need to calculate the moles of steam:
n = m/M
where M is the molar mass of water, which is 18.02 g/mol.
n = 10.0 g / 18.02 g/mol = 0.555 mol
Now we can calculate the heat evolved during condensation:
q1 = n × ΔHvap = 0.555 mol × 40.7 kJ/mol = 22.5 kJ
Step 2: Cooling of liquid water from 100°C to 0°C
The heat evolved during cooling can be calculated using the formula:
q = m × c × ΔT
where q is the heat evolved, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.
We need to calculate the mass of water formed from the condensation of 10.0 g of steam. Since the density of water is 1 g/mL, we know that:
m_water = m_ice = V × ρ = 10.0 g/mL × 0.92 g/mL = 9.2 g
Now we can calculate the heat evolved during cooling:
q2 = 9.2 g × 4.18 J/g°C × (100 - 0)°C = 385 kJ
Step 3: Freezing of liquid water from 0°C to -50°C
The heat evolved during freezing can be calculated using the formula:
q = m × ΔHfus
where q is the heat evolved, m is the mass of water, and ΔHfus is the molar heat of fusion of water, which is 6.01 kJ/mol.
We need to calculate the moles of water:
n = m/M = 9.2 g / 18.02 g/mol = 0.510 mol
Now we can calculate the heat evolved during freezing:
q3 = n × ΔHfus = 0.510 mol × 6.01 kJ/mol = 3.06 kJ
Total heat evolved = q1 + q2 + q3 = 22.5 kJ + 385 kJ + 3.06 kJ = 410.56 kJ
To know more about heat evolved refer to-
https://brainly.com/question/31321782
#SPJ11
What is the in a 12. 2 L vessel that contains 1. 13 mol of Co2 at a temperature of 42 degrees C?
The pressure of the [tex]Co_{2}[/tex] gas in the 12.2 L vessel at a temperature of 42°C with 1.13 mol of CO2 is 2.12 atm.
The volume of the vessel = 12.2 L
Number of moles of [tex]Co_{2}[/tex] = 1. 13 mol
Temperature = 42 degrees
To calculate the pressure of the gas we need to use the ideal gas law equation.
PV = nRT
P = nRT/V
Assuming that the Universal gas constant R = 0.0821 L·atm/(mol·K).
Converting the temperature degrees into Kelvin scale
T = 42°C + 273.15 = 315.15 K
Substituting the above values into the equation:
P = [(1.13 mol) * (0.0821 L·atm/mol·K)* (315.15 K)] / (12.2 L) = 2.12 atm
Therefore, we can conclude that the pressure of the gas is 2.12 atm.
To learn more about Pressure
https://brainly.com/question/25764275
#SPJ4
The complete question is:
What is the pressure required in a 12. 2 L vessel that contains 1. 13 mol of Co2 at a temperature of 42 degrees C?
27. Identify the particles that facilitate the electric conductivity of the following substances (1) Sodiun metal (ii) Sodium Chloride solution (iii) Molten Lead Bromide
The particles that facilitate the electric conductivity of the following substances. The current is able to flow through the molten lead bromide.
(i) Sodium metal: Sodium is a metal and conducts electricity due to the presence of mobile electrons in it. These electrons are free to move around and allow electric current to flow through the metal.
(ii) Sodium Chloride solution: Sodium chloride solution is a conductive solution because it contains the ions of both sodium and chloride, which are capable of carrying electric current. The positive sodium ions move towards the negative end of the electric field, while the negative chloride ions move towards the positive end of the field.
(iii) Molten Lead Bromide: Molten lead bromide is also a conductor of electricity because it contains the ions of both lead and bromide. The positively charged lead ions are attracted to the negative end of the electric field, while the negatively charged bromide ions are attracted to the positive end of the electric field. As a result, the current is able to flow through the molten lead bromide.
Know more about electric current here
https://brainly.com/question/2264542#
#SPJ11
Which two pioneer species help break up
rock to create a substrate rich in organic
material. starts the process of creating
soil in a newly created environment.
There are many pioneer species that can help break down and establish new ecosystems, but two common ones are lichens and mosses. These simple organisms are often the first to colonize barren or disturbed areas, paving the way for other, more complex species to follow.
Lichens are unique in that they are actually a symbiotic combination of two different organisms – a fungus and an algae or cyanobacterium. This partnership allows them to survive in a wide range of environments, including those with little or no soil. Lichens secrete acids that can dissolve rocks and other substrates, creating a thin layer of soil that other plants can use to establish themselves. Additionally, lichens can fix nitrogen from the air, providing a crucial nutrient for plant growth.
Mosses are another common pioneer species that can help break down and prepare new environments for other plants. Like lichens, they can grow in harsh conditions with little soil or nutrients. Mosses are able to absorb moisture and nutrients directly from the air, and can also trap sediment and organic matter, building up a layer of soil over time.
Additionally, mosses can store large amounts of water, which can be important for establishing other plants during dry periods.In summary, lichens and mosses are two pioneer species that can help break down and prepare new ecosystems for other plants. Through their unique adaptations and abilities, these simple organisms play a crucial role in establishing life in harsh or barren environments.
To know more about ecosystems refer here
https://brainly.com/question/13979184#
#SPJ11
A radiation of 2530 amstrong incidents on HI results in decomposition of 1. 85 × 10^-2 mole per 1000 cal of radiant energy. Calculate the quantum efficiency
The quantum efficiency (QE) of the radiation of 2530 amstrong incidents is approximately 3.47 x [tex]10^8[/tex].
We have,
Quantum efficiency (QE) is a measure of the number of molecules undergoing a specified reaction per photon absorbed.
In this case, you want to calculate the quantum efficiency based on the given data.
Quantum Efficiency (QE) is given by the formula:
QE = (Number of molecules decomposed) / (Number of photons absorbed)
Given:
Number of molecules decomposed = 1.85 × 10^-2 moles
Number of photons absorbed = Energy absorbed / Energy per photon
The energy of a photon (E) is given by Planck's equation:
E = hc / λ
Where:
h = Planck's constant = 6.626 × 10^-34 J·s
c = Speed of light = 3 × 10^8 m/s
λ = Wavelength of radiation = 2530 Å = 2530 × 10^-10 m
Calculate the energy per photon using the wavelength:
E = (6.626 × [tex]10^{-34}[/tex] J·s * 3 × [tex]10^8[/tex] m/s) / (2530 × [tex]10^{-10}[/tex] m)
= 0.007856 x [tex]10^{-34 + 8 + 10[/tex]
= 0.007856 x [tex]10^{-16}[/tex] J
Now, calculate the energy absorbed:
Energy absorbed = 1000 cal = 1000 * 4.184 J (since 1 cal = 4.184 J)
Number of photons absorbed = Energy absorbed / Energy per photon
Calculate the quantum efficiency using the given formula:
QE = (Number of molecules decomposed) / (Number of photons absorbed)
QE = (1.85 × [tex]10^{-2}[/tex] moles) / (Number of photons absorbed)
Substitute the value of the Number of photons absorbed:
QE = (1.85 × [tex]10^{-2}[/tex] moles) / [(1000 * 4.184 J) / (0.007856 x [tex]10^{-16}[/tex] J)]
QE = (1.85 × [tex]10^{-2}[/tex] moles) / (532586.56 x [tex]10^{16}[/tex] J)
QE = 0.000003474 x [tex]10^{14}[/tex]
QE ≈ 3474 × [tex]10^5[/tex]
QE = 3.47 x [tex]10^8[/tex]
Therefore,
The quantum efficiency (QE) is approximately 3.47 x [tex]10^8[/tex].
Learn more about quantum efficiency here:
https://brainly.com/question/2187279
#SPJ12
A tractor collides with a car while driving down the road. The car travels at a speed of 25m/s and weighs 1,300 kg. What is the momentum of the car? If the tractor weighs 1,500 kg and traveled at 5 m/s what was the total momentum of the collision?
The momentum of the car is 32,500 kg m/s, and the total momentum of the collision is 40,000 kg m/s.
The momentum of an object is calculated by multiplying its mass by its velocity. In the case of the car, its mass is 1,300 kg, and it travels at a speed of 25 m/s. To find the car's momentum, we can use the formula:
momentum = mass × velocity
Car's momentum = 1,300 kg × 25 m/s = 32,500 kg m/s
Now, let's find the momentum of the tractor. The tractor weighs 1,500 kg and travels at 5 m/s. Using the same formula:
Tractor's momentum = 1,500 kg × 5 m/s = 7,500 kg m/s
To find the total momentum of the collision, we simply add the momentum of the car and the tractor:
Total momentum = Car's momentum + Tractor's momentum
Total momentum = 32,500 kg m/s + 7,500 kg m/s = 40,000 kg m/s
In conclusion, the momentum of the car is 32,500 kg m/s, and the total momentum of the collision is 40,000 kg m/s.
To know more about momentum, visit:
https://brainly.com/question/30677308#
#SPJ11
What volume (mL) of concentrated H3PO4 (14. 7 M) should be used to prepare 125 mL of a 3. 00 M H3PO4 solution?
You should use about 25.51 mL of concentrated H3PO4 to prepare 125 mL of a 3.00 M H3PO4 solution.
To prepare 125 mL of a 3.00 M H3PO4 solution using concentrated H3PO4 (14.7 M), you can use the dilution formula:
M1 × V1 = M2 × V2
Where M1 is the initial molarity (14.7 M), V1 is the volume of the concentrated solution needed, M2 is the final molarity (3.00 M), and V2 is the final volume (125 mL).
Rearrange the formula to solve for V1:
V1 = (M2 × V2) / M1
V1 = (3.00 M × 125 mL) / 14.7 M
V1 ≈ 25.51 mL
Therefore, you should use approximately 25.51 mL of concentrated H3PO4 to prepare 125 mL of a 3.00 M H3PO4 solution.
To learn more about molarity, refer below:
https://brainly.com/question/8732513
#SPJ11
Calculate the ph of the resulting solution when 85 mL of 0. 3 M nitric acid is mixed with 75 mL of 0. 2 magnesium hydroxide
whats the volume of dry hydrogen gas at standard astrospheric pressure
The volume of dry hydrogen gas at standard atmospheric pressure (which is typically defined as 1 atm or 101.325 kPa) depends on the number of moles of hydrogen gas present. The ideal gas law, PV = nRT, relates the pressure (P), volume (V), number of moles (n), and temperature (T) of an ideal gas. Assuming standard temperature and pressure (0°C and 1 atm), one mole of any ideal gas occupies a volume of 22.4 L. Therefore, to find the volume of dry hydrogen gas at standard atmospheric pressure, we need to know how many moles of hydrogen gas we have.
For example, if we have 1 mole of dry hydrogen gas at standard atmospheric pressure, the volume would be 22.4 L. If we have 0.5 moles of dry hydrogen gas, the volume would be 11.2 L. And so on.
What are some things you use in your life that uses sound energy? _
Some things that you use in your life that uses sound energy are car horn honking and car door closing.
Sound is the longitudinal (compression or rarefaction) wave-based transfer of energy through materials.
When a force, such as sound or pressure, causes an item or substance to vibrate, the result is sound energy. Waves of that energy pass through the substance. We refer to the sound waves as kinetic mechanical energy.
Everyday Examples of Sound Energy
•An air conditioning fan.
•An airplane taking off.
•A ballerina dancing in toe shoes.
•A balloon popping.
•The bell dinging on a microwave.
•A boom box blaring.
•A broom swishing.
•A buzzing bee.
To know more about sound energy
https://brainly.com/question/3369385
#SPJ4
How many liters of NO2 (at STP) can be produced with 25.0 g of Cu reacting with concentrated nitric acid?
The volume (in liters) of NO₂ at STP that can be produced when 25 g of Cu react with concentrated nitric acid, HNO₃ is 17.6 liters
How do i determine the volume of of NO₂ produced?First, we shall determine the mole in 25 g of Cu. Details below:
Mass of Cu = 25 g Molar mass of Cu = 63.55 g/mol Mole of Cu =?Mole = mass / molar mass
Mole of Cu = 25 / 63.55
Mole of Cu = 0.393 mole
Next, we shall determine the mole of of NO₂ produced from the reaction. Details below:
Cu + 4HNO3 -> Cu(NO₃)₂ + 2NO₂ + 2H₂O
From the balanced equation above,
1 mole of Cu reacted to produced 2 moles of NO₂
Therefore,
0.393 mole of Si will react to produce = 0.393 × 2 = 0.786 mole of NO₂
Finally, we shall obtain the volume of NO₂ produced at STP. Details below
At STP,
1 mole of NO₂ = 22.4 Liters
Therefore,
0.786 moles of NO₂ = 0.786 × 22.4
0.786 moles of NO₂ = 17.6 liters
Thus, we can conclude that the volume of NO₂ produced is 17.6 liters
Learn more about volume:
https://brainly.com/question/225322
#SPJ1
Identify the type of reaction.
HgO --> Hg + O2
Combustion
Decomposition
Synthesis
Double Displacement
Single Replacement
The given reaction HgO → Hg + O₂ is a decomposition reaction.
The balanced chemical reaction is 2HgO → 2Hg + O₂
A decomposition reaction is a type of reaction in which a particular compound or molecule dissociates or decomposes to form smaller constituent particles.
Combustion is the burning of any substance in presence of oxygen to give out carbon dioxide, water and heat.
In Synthesis reaction , new compounds are synthesized from different reactants.
Displacement reactions involve exchange of cations and anions from reactants to form different products.
To know more about decomposition here
https://brainly.com/question/14024847
#SPJ4
Using the formula m1v1=m2v2 , you have a 0.5 m mgso4 stock solution available.
calculate the volume of the stock solution needed to make 2.0 l of 0.20m mgso4.
0.5 l
04.0l
0.9 l
kid 0.8 l
We need 0.4 L of the 0.5 M MgSO₄ stock solution to make 2.0 L of 0.20 M MgSO₄.
To calculate the volume of the 0.5 M MgSO₄ stock solution needed to make 2.0 L of 0.20 M MgSO₄, we will use the formula m₁v₁ = m₂v₂.
1. Identify the given values:
m₁ = 0.5 M (concentration of the stock solution)
m₂ = 0.20 M (concentration of the desired solution)
v₂= 2.0 L (volume of the desired solution)
2. Plug the given values into the formula:
(0.5 M)(v₁) = (0.20 M)(2.0 L)
3. Solve for v1 (volume of the stock solution needed):
v₁= (0.20 M)(2.0 L) / (0.5 M)
v₁= 0.4 L
So, you need 0.4 L of the 0.5 M MgSO₄ stock solution to make 2.0 L of 0.20 M MgSO₄.
To know more about stock solution :
https://brainly.com/question/27304546
#SPJ11
