What is the volume at STP of 3.44 x 1023 molecules of CO2
gas?
a 25.1L
b 39.2 L
С
12.8 L
d 15.7 L

Answers

Answer 1

Answer:

C. 12.8 liters.

Explanation:

The Standard Temperature and Pressure (STP) of a gas are 273.15 K and 100 kilopascals. From Avogadro's Law, a mole of carbon dioxide contains [tex]6.022 \times 10^{23}[/tex] molecules. If we suppose that carbon dioxide behaves ideally, then the equation of state for ideal gas is:

[tex]P\cdot V = n\cdot R_{u}\cdot T[/tex] (1)

[tex]P\cdot V = \frac{r\cdot R_{u}\cdot T}{N_{A}}[/tex] (1b)

Where:

[tex]P[/tex] - Pressure, measured in pascals.

[tex]V[/tex] - Volume, measured in liters.

[tex]r[/tex] - Amount of molecules, no unit.

[tex]N_{A}[/tex] - Avogadro's number, no unit.

[tex]R_{u}[/tex] - Ideal gas constant, measured in pascal-liters per mole-Kelvin.

[tex]T[/tex] - Temperature, measured in Kelvin.

If we know that [tex]P = 100000\,Pa[/tex], [tex]r = 3.44\times 10^{23}[/tex], [tex]N_{A} = 6.022\times 10^{23}[/tex], [tex]T = 273.15\,K[/tex] and [tex]R_{u} = 8.314\times 10^{3}\,\frac{L\cdot Pa}{mol\cdot K}[/tex], then the volume of carbon dioxide at STP is:

[tex]V = \frac{r\cdot R_{u}\cdot T}{N_{A}\cdot P}[/tex]

[tex]V = \frac{(3.44\times 10^{23})\cdot \left(8.314\times 10^{3}\,\frac{L\cdot Pa}{mol\cdot K} \right)\cdot (273.15\,K)}{(6.022\times 10^{23})\cdot (100000\,Pa)}[/tex]

[tex]V = 12.972\,L[/tex]

Therefore, the correct answer is C.


Related Questions

Im gonna ride it do it just how you like it and after that let's do it?
what is the answer of this.

Answers

Answer:

the hell?

Explanation:

dababy............................

If 3.68 grams of zinc were allowed to react with excess hydrochloric acid to produce zinc chloride and hydrogen gas, how much zinc chloride should be produced?

Suppose that 7.12 grams of zinc chloride is actually recovered, what is the per cent yield?

Answers

Answer:

Here... Since there is excess HCl, you know the Zinc will be the limiting reagent.  I was able to create the reaction equation based on the info you gave: Z + 2HCl ----> ZCl2 +2H.  Now, in order to find the theoretical yield of ZCl, you need to convert Zinc from grams to moles.  Do this by dividing by its molar mass (65.38), thus: 3.68 (g) / 65.38 (g/mol) = 0.056286... moles.  

Now, using the balanced equation we made earlier, we see that 1 mole of Zinc creates 1 mole of ZCl2.  Thus our ratio is 1:1.  This makes the next step easy.  Since it is 1:1, we multiply the number of moles we have of Zinc (0.056286...) by the number of moles it will create of ZCl (1).  (0.056286)(1) = 0.056286 moles ZCl.  Now convert this to grams by multiplying by its molar mass (136.28) and you get 7.67 grams.  This is your theoretical yield.  The percent yield is found by dividing the actual amount obtained (7.12 g.) by the theoretical yield (7.67 g.) then multiply that by 100%.   When this is done, your Percent Yield is about 92.8%

meantion the two groups of mineralsalts and their two examples (each)​

Answers

Answer:

sodium example salt and soy sauce

potassium example meat milk fresh fruits

how did the periodic table get its name?
a. the periodic table got its name from the way the elements are arranged in periods called groups.
b. the periodic table got its name from the way the elements are arranged in rows which are called periods.
c. the periodic table got its name from the way the elements are arranged in rows which are called periodic groups.
d. the periodic table got its name from the way the elements are arranged in rows which are called groups.

Answers

Answer:

no te engiendo mi panahellow

Answer:

b

Explanation:

b. the periodic table got its name from the way the elements are arranged in rows which are called periods.

Why is systems thinking important?
Systems thinking ignores the details of a system and just looks at its overall function.
Systems thinking ranks the parts of a system in terms of most important to least.
Systems thinking allows us to understand all the parts that make up the whole system.
Systems thinking examines how a system affects human life.

Answers

Answer:

Systems thinking allows us to understand all the parts that make up the whole system.

Explanation:

Just took the test

The systems thinking important because, Systems thinking allows us to understand all the parts that make up the whole system. Therefore, option C is correct.

What system thinking ?

By considering the world's complexity in terms of links and entire rather than breaking it down into its component components, systems thinking helps us make sense of how complicated the world is. It has been applied as a method for investigating and producing efficient action in challenging situations.

By using a deeper grasp of the surrounding structure and its constituent parts rather than relying just on previous events, systems thinking gives a technique to more accurately forecast future outcomes.

Systems thinking is a discipline in management that focuses on understanding a system by looking at the connections and interactions between the different parts that make up the entire of that defined system. The concept of the "entire system" is a way of looking at an entire organization in relation to its surroundings.

Thus, option C is correct.

To learn more about system thinking, follow the link;

https://brainly.com/question/17174999

#SPJ2

What is the difference between an empirical formula and a molecular formula?

Answers

Answer:

The empirical formula simply states the ratios of the elements that make up the molecule, while molecular formulas specify the amounts of each element exactly, not just giving the ratio. Let's take ethane (C2H6) as an example.

Is it okay if you help me? I'm kind of in a tight spot here. Tysmmmmmmmmmmmmm o(❁´◡`❁)o!!

Answers

Answer:

the answer is true

Explanation:

it's just true

How many eggs are in 1 mole of eggs?

Answers

Answer:

I believe it is Avogadro's number: 6.022 × 10²³

Explanation:

One mole of a substance is equal to 6.022 × 10²³ units of that substance

Anyone know how to do this?

Answers

Answer:I can’t see the question

Explanation:

Which layer of the ocean is the least dense?

Question 4 options:

they are all the same


middle layer


closest to the ocean floor


closest to the surface

Answers

Answer:

the deep ocean

Explanation:

goog   le

The layer which is closest to the surface is least dense.

What are the layers of ocean?

The ocean can be divided into three main layers:

The surface layer (also known as the epipelagic zone), which extends from the surface to about 200 meters deep and is the warmest and lightest layer.

The mesopelagic zone (or twilight zone), which extends from 200 to 1000 meters deep and is characterized by limited light and declining temperatures.

The bathypelagic zone (or midnight zone), which extends from 1000 to 4000 meters deep and is the coldest, darkest, and most pressure-filled layer.

Below the bathypelagic zone lies the abyssopelagic zone, which extends from 4000 to the ocean floor and is characterized by near-constant darkness and extremely cold temperatures.

Learn more about ocean layers, here:

https://brainly.com/question/12676666

#SPJ6

____Na3PO4+____CaCI2 --->____NaCI+ ____Ca(PO4)2

Answers

Answer:

3CaCi2 + 2Na3PO4 → Ca3(PO4)2 + 6NaCi

Explanation:

What happens to potential energy as kinetic energy increases during a roller coaster ride?

Answers

Answer:

On a roller coaster, energy changes from potential to kinetic energy and back again many times over the course of a ride. Kinetic energy is energy that an object has as a result of its motion. Potential energy is the energy an object has as a result of its position

Explanation:

which element has a smaller atomic radius than strontium (Sr)?

Answers

it is tecnically magnesium,

Answer:

barium is the answer

How many liters are there in 28g of B?

Answers

Hi
The volume is 58.1
The moler mass is 10.8
Molar mass details
10.81B (1*10.81)

Hope this helps

Explain why a halogen bulb has a longer bulb life than a traditional incandescent bulb filled with argon.

Answers

Answer:

The halogen bulb lasts longer because the filament lasts longer. It can have twice the life of an incandescent and use the same amount or slightly less (10%) electricity.

Explanation:

If I react 4.2mol N2 with H2, how many moles of NH3 would I produce?

Answers

Answer:

first balance the reaction

n2 + 3h2 --> 2NH3

then you have your ratios

so for every mole of N2 you get 2 NH3

so 8.4mol is your answer

Explanation:

what is light energy​

Answers

Answer:

Light energy is a form of electromagnetic radiation. Light consists of photons, which are produced when an object's atoms heat up.

Explanation:

Answer:

Light energy is a kind of kinetic energy with the ability to make types of light visible to human eyes. Light is defined as a form of electromagnetic radiation emitted by hot objects like lasers, bulbs, and the sun. Light contains photons which are minute packets of energy.

Explanation:

hope it's helpful for you.

Do you think personality
traits are primarily inherited
from your parents or
influenced by the
environment? What is your
evidence you researched?

Answers

influenced by the environment

Personality traits are influenced by a combination of genetic and environmental factors. Research suggests that both genetics and the environment play significant roles in shaping an individual's personality.

Studies on twins and adoption give proof that genetics affect personality. When opposed to fraternal twins, who only share 50% of their genetic makeup, identical twins, who share 100% of their genetic material, frequently show stronger similarities in personality traits. This shows that certain personality traits are influenced by hereditary factors.

Yet, environmental influences also have a considerable impact on personality. Despite having comparable DNA, studies on non-twin siblings reared in the same home have found that they frequently display personality differences.

This shows that the environment, including parental practices, cultural influences, and life events, has a significant impact on personality development.

To know more about Personality traits:

https://brainly.com/question/28139450?referrer=searchResult

#SPJ2

should we learn chemical kinetic derivation

Answers

Answer:

Yes

Explanation:

It is important to learn about in science

Answer : Yes

Explanation:

One reason for the importance of kinetics is that it provides evidence for the mechanisms of chemical processes. Besides being of intrinsic scientific interest, knowledge of reaction mechanisms is of practical use in deciding what is the most effective way of causing a reaction to occur.

How many atoms of Mg are present in 97.22 grams of Mg?

Answers

Answer:

2.439 x 10E24 atoms

Explanation:

from

N=n x NA where

N- number of atoms

n-number of moles and NA is the avogadro's number

If an element is very reactive, is it more likely to be found in elemental state or in a compound?

Answers

Answer:

Compound state

Explanation:

Because reactive elements mostly react immediately with other elements

very urgent
1. Describe an experiment to show the chemical effect of electric current.
2. State three conditions necessary for combustion
3. Describe all that you observe when a piece of iron is placed in copper sulphate solution for a
few minutes.​

Answers

Explanation:

STEP 1- Take two iron nails.

STEP 2- Clean it with sand paper.

STEP 3- Wrap copper wire around both the nails. And connect the other end to the battery terminal.

STEP 4- Take water in beaker and little amount of salt in it or a few drpos of sulphuric acid in it.

STEP 5- Immerse the nails in the solution.

STEP 6- Observe the nails carefully. You can see bubbles of gases coming out from water near nails.

When, electeric current is passed through water gases like hydrogen and oxygen are evolved.

2.Three things are required in proper combination before ignition and combustion can take place---Heat, Oxygen and Fuel. There must be Fuel to burn. There must be Air to supply oxygen. There must be Heat (ignition temperature) to start and continue the combustion process.

When iron is placed in Copper sulphate solution, the iron is coated with a brown coloured substance "copper" and CuSo4 solution changes from blue to light green. This is due to iron displaces copper as it is more reactive than copper.

PLS HELP ME THIS IS DUE TODAY BRO ILL BRAINLIST U JUST DO THE ONES U KNOW WAJDHWNDIGB!

Answers

Answer: Helium: atomic number 2. EC 2

Neon: atomic number 10. EC 2,8

hydrogen: atomic number 1. EC 1

magnesium: atomic number 12. EC 2,8,2

chlorine: atomic number 17. EC 2,8,7

Aluminum: atomic number 13. EC 2,8,3

Explanation: hope this helped

How many atoms of aluminum (Al) are in 6.98 mol of aluminum?​

Answers

Answer:

[tex]\boxed {\boxed {\sf 4.20 *10^{24} \ atoms \ Al }}[/tex]

Explanation:

To convert from moles to atoms, we must us Avogadro's number: 6.022*10²³. This tells us the number of particles (atoms, molecules, etc.) in 1 mole of a substance. In this case, it is atoms of aluminum.

We can use the number as a fraction.

[tex]\frac{6.022*10^{23} atoms \ Al}{1 \ mol \ Al}[/tex]

Multiply by the given number of moles: 6.98

[tex]6.98 \ mol \ Al *\frac{6.022*10^{23} atoms \ Al}{1 \ mol \ Al}[/tex]

The moles of aluminum will cancel.

[tex]6.98 *\frac{6.022*10^{23} atoms \ Al}{1 }[/tex]

The denominator of 1 can be ignored.

[tex]6.98 * {6.022*10^{23} atoms \ Al}[/tex]

Multiply.

[tex]4.203356*10^{24} \ atoms \ Al[/tex]

The original measurement of moles has 3 significant figures, so our answer must have the same.

For the number we calculated, that is the hundredth place. The 3 in the thousandth place tells us to leave the 0.

[tex]4.20 *10^{24} \ atoms \ Al[/tex]

There are about 4.20*10²⁴ atoms of aluminum in 6.98 moles.

Look at the image below:
Palet Reyes
Preiste
Las Trances
San Juan Bautista
Panades
NORTH AMERICAN PLATE
und
SACRO PLATE
Carne Plan
ANDREAS PAUL
What type of plate boundary is shown here?
convergent
divergent
O transform

Answers

Answer:

Thats also transform boundary

Bill is experimenting with two simple machines. How will he know which
machine is more efficient?
O It will use less force to do the same amount of work.
O It will use more force to do the same amount of work.
O It will be lighter and stronger than the other simple machine.
It will not be possible to tell which simple machine is more efficient.

Answers

The first one I believe
I think the best answer is A

Which of the following may be a reason why climbing up objects would help the ivy survive?

Answers

I need the answers to help, but it will probably be something along the lines of climbing objects for sunlight.

Look at the image below:
Pain Reyne
Ben Francia
Les Trans
01 Juan Bautista
Pents
SAN
PEAS FAULT
NORTH AMERICAN PLATE
CIRC PLATE
Carina
What type of plate boundary is shown here?
O convergent
divergent
transform

Answers

Answer:

Transform

see image below:

Explain why the metals conduct electricity



write in your own words please, don't copy-paste from internet

Answers

Answer:

Metals conduct electricity because the electrons inside the metal are relatively free to move. So when electricity is pass through metals, electrons carry electricity and spread it all over the metal. The mobility of electrons is the reason why metals conduct electricity.

Calculate the number of molecules in 64.5 grams of Nitrogen monoxide, NO

Answers

N=9.933

Explanation:

no of mole = m÷mr

then ,no of molecules=n×la

Other Questions
Yep here we go again:The x-axis represents the number of hours before or afternoon, and the y-axis represents the temperature in degrees Celsius.At 9 a.m., it was below freezing. In what quadrant would this point be plotted? Use Roman Numerals in your answer: Either I, II, III, or IV At 11 a.m., it was 10 degrees Celsius. In what quadrant would this point be plotted? Here is the image T ^ T ( I will also give brainliest!) hii please help ill give brainliest if you give a correct answer!!! equations with variables on both sides that make the answer x=8 the part of aeroplane is made up of alumunium why? Explica fundamentando porque los indigenas creian que los sucesos catastrficos eran productos de una maldicin. Refirase a cultura, religin y organizacin politica de los INCAS Find x, the angle of depression from the top of a lighthouse that is 153 ft above the water level to the waterline of a ship 1071 ft off shore. Round your answer to the nearest tenth of a degree. Find the length of the third side. If necessary, write in simplest radical form 1. Which statement best identifies the poet's purpose inthe poem?O A to test children on how much they know about PaulRevere's famous rideOB to share the story of how Paul Revere alerted peopleto the approaching British ArmyOC to share the story of how an innkeeper helped PaulRevere stop an approaching British ArmyOD to suggest that it was Paul Revere's friends whoalerted people of the approaching British Army, notRevereSAVE & NEXT Energy Transformation and Conservation Explain how different forms of energy are related. In this lab, you used a dichotomous key to identify organisms. Why would this skill be valuable to you? Check all possible reasons below.A. It helps you classify organisms.B. It helps you identify ecosystems.C. It helps you study and appreciate biodiversity.D. It helps you analyze an organisms traits.E. It helps you understand how organisms interact. Jose wants to find out how many men wear bright colored ties. Whichmarketing research tool should he use?A. SurveyB. Business recordsC. Focus groupD. Census data pease say if i got it right Because most of the parts for its irrigation systems are standard, Waterways handles the majority of its manufacturing as a process cost system. There are multiple process departments. Three of these departments are the Molding, Cutting, and Welding departments. All items eventually end up in the Packaging Department, which prepares items for sale in kits or individually. The following information is available for the Molding department for January. Work in process beginning: Units in process 24,100 Stage of completion for materials 80% Stage of completion for labor and overhead 30% Costs in work in process inventory: Materials $168,470 Labor 68,020 Overhead 17,160 Total costs in beginning work in process $253,650 Units started into production in January 59,800 Units completed and transferred in January 58,300 Costs added to production: Materials $281,593 Labor 311,150 Overhead 60,120 Total costs added into production in January $652,863 Work in process ending: Units in process 25,600 Stage of completion for materials 50% Stage of completion for labor and overhead 10%Required:Prepare a production cost report for Waterways using the weighted-average method. 1. Match the term with the definition from the lesson.Definition: An interpretation of a law that is used in later trials A. precedentB. delinquentC.United States CodeD. lawsuit PLS COME QUICK ASAP!!!!!!IIM TIMED!!!!!If I found a magic lamp and I could have one wish, I would wish that I had a normal face that no one ever noticed at all. I would wish that I could walk down the street without people seeing me and then doing that look-away thing. Here's what I think: the only reason I'm not ordinary is that no one else sees me that way.WonderR.J. PalacioIf you are not sure whether you understand the last sentence, what could you do?A. Move on to the next part of the story.B. Reread the paragraph carefully.C. Make a prediction about what might happen next. Read these paragraphs and answer the question that follows:In 2008, more than one million American students gave nearly 20 million service hours to their communities. They made a difference in people's lives and learned some important life lessons in the process. Organizations, including schools, are actively promoting service for all citizens as a way to be involved, help others, and improve themselves.Service is helping other people and being active in your community. For example, one group of teens planted a community garden with their friends. They grow a variety of vegetables. The garden requires regular care. The teens donate the produce to a local soup kitchen. Workers there use the produce to help feed people in the community. By tending the garden and donating their produce, the teens are actively helping make life a bit better for others in their community.Service is valuable in ways that cannot be measured in dollars. People volunteer or serve others without expecting money or gifts in return. Service is not about earning money. It is not just collecting money to give to a group. It is about action and contributing to the common good. The people who serve as well as those who receive help benefit in many ways that are more important than money or gifts. For example, a soup kitchen provides essential food to people who may otherwise go hungry. The soup kitchen is extremely valuable for those struggling to get enough to eat. Those serving learn about compassion and how helping others can improve life for all.Millions of Americans are making society better for themselves and for others. They are participating citizens in their community, raising up those who are less fortunate. In return, they become better people who can understand the perspectives and needs of others, which are invaluable and important qualities of good citizens.Which sentence begins the introduction of this article excerpt? (5 points)Question 4 options:1) Service is valuable in ways that cannot be measured in dollars.2) Service is helping other people and being active in your community.3) Millions of Americans are making society better for themselves and for others.4) In 2008, more than one million American students gave nearly 20 million service hours to their communities. how it is done technique in writing historical Which of the following options have the same value as 40%, percent of 84? Please Answer ASAP Would you expect a reaction to occur with Hydrogen gas and Copper (II) chloride? What is the simplified form of this expression? (-3x2 + x + 5) (4x2 2x) A. 7x2 + 3x 5 B. -7x2 + 3x + 5 C. X2 x + 5 D. -x2 + 3x 11