What is the temperature of 5. 16g of helium gas at a pressure of 785 mmHg that occupies a 1. 00 L container?

The temperature of the gas at 100 kPa is approximately 149.575 K.

The temperature of a gas at 100 kPa, when it initially had a temperature of 26°C at 200 kPa, can be determined using the combined gas law. The combined gas law relates the initial and final pressures, volumes, and temperatures of a gas, and can be written as:

(P1 * V1) / T1 = (P2 * V2) / T2

where P1 and P2 are the initial and final pressures, V1 and V2 are the initial and final volumes, and T1 and T2 are the initial and final temperatures.

In this case, we are given the initial pressure (P1 = 200 kPa), initial temperature (T1 = 26°C), and final pressure (P2 = 100 kPa). We can convert the initial temperature to Kelvin by adding 273.15, so T1 = 26°C + 273.15 = 299.15 K.

Since the problem does not specify any changes in volume, we can assume that the volume remains constant (V1 = V2). This simplifies the equation to:

(P1 * V) / T1 = (P2 * V) / T2

Canceling out the volume terms (V) on both sides:

P1 / T1 = P2 / T2

Now, we can solve for the final temperature, T2:

T2 = (P2 * T1) / P1
T2 = (100 kPa * 299.15 K) / 200 kPa
T2 ≈ 149.575 K

Therefore, the temperature of the gas at 100 kPa is approximately 149.575 K.

To know more about temperature, visit:

https://brainly.com/question/29133754#

#SPJ11

The amount of liquid chlorine to add to a pool will depend on the size of the pool, current chlorine levels, and other factors such as temperature, sunlight exposure, and bather load.

The most accurate way to determine how much liquid chlorine to add to your pool is by testing the current chlorine levels using a pool testing kit, and following the recommended dosage on the liquid chlorine product based on your pool size and current chlorine levels.

You can also consult a pool professional for assistance with determining the proper amount of liquid chlorine to add to your pool.

To know more about chlorine refer to-

https://brainly.com/question/31560014

#SPJ11

Water is a clear liquid at room temperature, composed of hydrogen and oxygen. It is essential for life, has different properties from its constituent elements, and forms through chemical bonding of hydrogen and oxygen atoms in covalent bonds.

Answers to given questions are as follows :

1. I have chosen water.

2. Water is a clear, odorless, and tasteless liquid that occurs in the liquid phase at room temperature and pressure. It is not poisonous and is essential for life. Water is used for various purposes such as drinking, cooking, and cleaning. It can also be used as a solvent, coolant, and as a reactant in many chemical reactions.

3. The elements that make up water are hydrogen and oxygen.

4. Hydrogen is a colorless, odorless, and tasteless gas at room temperature and pressure. It is highly flammable and can form explosive mixtures with air. Oxygen is a colorless, odorless, and tasteless gas at room temperature and pressure. It is essential for life and is used in the production of steel, chemicals, and medical applications.

5. Water has very different properties from the properties of its individual elements. For example, while hydrogen is highly flammable, water is not flammable at all. Oxygen is necessary for combustion, but water is used to extinguish fires. Water is a liquid at room temperature and pressure, while both hydrogen and oxygen are gases.

6. The difference in properties between the elements and the compound can be explained by the formation of chemical bonds between the atoms of the elements. In the case of water, hydrogen and oxygen atoms combine to form water molecules through the sharing of electrons in covalent bonds. This results in a new substance with different properties than the individual elements.

To know more about the Water refer here :

https://brainly.com/question/16630851#

#SPJ11

The mass of dissolved solids in 1 m³ of the water sample is 16 g.

To convert from cm³ to m³, we divide by 1,000,000 (10^6) since there are 1,000,000 cm³ in 1 m³.

First, we need to find the mass of dissolved solids in 1 cm³ of the water sample:

Next, we can find the mass of dissolved solids in 1 m³ of the water sample:

However, the answer should be given in standard form, so we convert 640 to scientific notation:

To learn more about mass of dissolved solids, here

https://brainly.com/question/14906002

#SPJ4

Milk is commonly packaged in different types of containers, such as cartons, plastic bottles, and glass bottles. Each packaging type has its physical and chemical properties, which can affect the quality, shelf-life, and safety of the product.

Cartons are commonly used for shelf-stable milk products, such as UHT (ultra-high temperature) milk, and are made of paperboard, plastic, and aluminum layers. These materials provide a barrier against light, oxygen, and moisture, which helps to preserve the milk's freshness and flavor. Moreover, cartons are lightweight and stackable, which makes them easy to store and transport.

Plastic bottles are widely used for packaging fresh milk, and the choice of plastic depends on the application. For example, high-density polyethylene (HDPE) is commonly used for milk jugs due to its high strength and stiffness, while low-density polyethylene (LDPE) is used for milk bags due to its flexibility and durability.

Plastic bottles are lightweight, shatter-resistant, and provide a good barrier against oxygen and water vapor.

Glass bottles are another popular choice for milk packaging, and they provide an airtight and inert container for milk. Glass is impermeable to gases and does not interact chemically with the milk, which helps to maintain the milk's freshness and flavor.

However, glass is relatively heavy, fragile, and requires more energy to manufacture and transport compared to other packaging materials.

The choice of packaging material depends on various factors, such as the product's properties, manufacturing cost, consumer preference, and environmental impact. The reactivity of a material depends on its position in the periodic table, with metals being more reactive than nonmetals.

Aluminum is a highly reactive metal, but it forms a protective oxide layer that prevents further reaction with the environment. Therefore, it is commonly used for making cooking utensils as it is lightweight, durable, and has good thermal conductivity.

The packaging plays an essential role in protecting the product from contamination, physical damage, and deterioration. The use of improper packaging materials or techniques can lead to the growth of microorganisms, loss of nutrients, off-flavors, and potential health hazards.

For example, the migration of harmful chemicals from plastic packaging into food can cause health problems such as endocrine disruption, cancer, and reproductive disorders.

To know more about chemical properties refer to-

https://brainly.com/question/1935242

#SPJ11

The amplitude of the wave is 1.5 meters.

The amplitude of a wave is defined as the maximum displacement of a particle from its equilibrium position as a wave passes through it. In this case, the given information tells us that the height of the wave is 3 meters. Since the amplitude is half of the height, we can calculate it by dividing 3 meters by 2, which gives us an amplitude of 1.5 meters.

It is important to note that the amplitude of a wave affects its energy and intensity. Waves with higher amplitudes have greater energy and produce louder sounds or brighter light, while waves with lower amplitudes have less energy and produce softer sounds or dimmer light. The amplitude of a wave can also be affected by factors such as the distance traveled, the medium through which the wave is traveling, and the frequency of the wave.

To learn more about amplitude here

https://brainly.com/question/9525052

#SPJ4

The wave’s amplitude is equal to half of this height. The amplitude is 10.

Amplitude is a measure of the magnitude of a waveform or the strength of a signal. It is usually expressed as the peak value of a waveform or signal. It is also commonly referred to as the height of the waveform or signal. Amplitude is measured in decibels (dB) which is a logarithmic unit of measure. Amplitude is an important factor when determining the intensity of a signal or waveform. Higher amplitude signals usually result in louder sounds or higher voltages in electronic circuits. Lower amplitude signals usually result in quieter sounds or lower voltages in electronic circuits.

To learn more about amplitude

https://brainly.com/question/31014522

#SPJ4

The molarity of the solution containing 15.0 g of NaOH in 115.0 mL of H₂O is 3.26 M.

To calculate the molarity of the solution, we first need to convert the mass of NaOH and the volume of water to moles and liters, respectively.

First, we need to find the number of moles of NaOH in 15.0 g. The molar mass of NaOH is 40.00 g/mol, so:

15.0 g NaOH x (1 mol NaOH/40.00 g NaOH) = 0.375 mol NaOH

Next, we need to convert the volume of water from milliliters to liters:

115.0 mL H₂O x (1 L/1000 mL) = 0.115 L H₂O

Now we can calculate the molarity of the solution:

Molarity = moles of solute/liters of solution

Molarity = 0.375 mol NaOH / 0.115 L H₂O

Molarity = 3.26 M

Therefore, the molarity of the solution is 3.26 M.

Learn more about molarity at https://brainly.com/question/30404105

#SPJ11

The element you are looking for is sulfur (s).

To determine the element, we first identify the position of oxygen and selenium in the periodic table. Oxygen is in Group 16 (also known as the chalcogens), and so is selenium.

Elements in the same group typically have similar chemical properties due to having the same number of valence electrons. Next, we examine the atomic numbers. Oxygen has an atomic number of 8, and argon has an atomic number of 18.

The element in question must have an atomic number between 9 and 17. Since it shares similar chemical properties with oxygen and selenium, it must also be in Group 16. The only element in Group 16 with an atomic number between 9 and 17 is sulfur, with an atomic number of 16.

To know more about periodic table click on below link:

https://brainly.com/question/11155928#

#SPJ11

In the reaction H─H ⟶ H + H, with an average energy change of 436 kJ/mol (H2 + 436 kJ/mol → 2 H), the correct description is:
a. The energy will be required as bonds are being broken.

When a chemical reaction involves breaking bonds, energy is typically required to overcome the attractive forces holding the atoms together in the molecule. Breaking a covalent bond requires an input of energy, as the atoms involved need to move apart and overcome their mutual attraction.

In the case of the reaction H─H ⟶ H + H, the hydrogen molecule (H2) is composed of two hydrogen atoms held together by a covalent bond. In order to separate the two hydrogen atoms and form two individual hydrogen atoms, the covalent bond must be broken.

This requires an input of energy to overcome the bond's strength and break the attractive forces between the atoms.

The given average energy change of 436 kJ/mol indicates the amount of energy required to break one mole of hydrogen molecules into individual hydrogen atoms. This energy is needed to disrupt the H─H bond and separate the atoms.

Therefore, the correct description for this reaction is that energy will be required as bonds are being broken.

To learn more about hydrogen, refer below:

https://brainly.com/question/28937951

#SPJ11

Answer: 770 mL

Explanation:

Charles' law states that [tex]\frac{V_{1} }{T_{1} } =\frac{V_{2} }{T_{2} }[/tex], so as temperature increases, volume does as well. We can plug in our values for V₁,T₁,and T₂ to this equation and solve for V₂, using L for volume and, importantly, kelvin for temperature. (kelvin is 273 + celsius).

[tex]\frac{0.675}{305} =\frac{V_{2} }{348} \\V_{2}=0.770 L[/tex]

Two important techniques used in titration that provide accurate results are the use of standardized solutions and the proper use of indicators and ignoring these techniques can lead to inaccurate conclusions, wasted resources, and potentially hazardous outcomes.

The use of standardized solutions is important because it ensures that the concentration of the solution being used is known with a high degree of accuracy. Standardization involves carefully preparing a solution of known concentration and then using it to determine the concentration of another solution.

The proper use of indicators is also crucial in titration because it helps to detect the endpoint of the reaction. Indicators are substances that undergo a color change when the reaction reaches a certain point. The choice of indicator depends on the reaction being studied, and the wrong indicator can result in an inaccurate endpoint determination.

To learn more about titration follow the link:

https://brainly.com/question/31271061

#SPJ4

The complete question is:

There are many aspects to the technique known as titration that are extremely important if results are to be accurate. In traditional or authentic laboratory setting, these techniques are important and sometimes delicate. List two techniques used in this lab that provided you with the most accurate possible results. Describe why these techniques are important and how ignoring the techniques would affect the lab.

Technique #1: Why technique is important?

Technique #2: Why is technique #2 important?

An unknown solution can be tested to see if it contains magnesium nitrate or strontium nitrate by combining it with potassium carbonate and potassium sulphate. For each reaction, the balanced molecular equations are given.

A "chemical process occurring in an aqueous solution when two or more ionic bonds combine, producing an insoluble salt," is what is referred to as a "precipitation reaction." precipitation is the insoluble salts that result from the precipitation processes.

Precipitation reactions, acid-base reactions, and oxidation-reduction (or redox) reactions are the three primary categories of aqueous reactions.

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

We can distinguish 4-hydroxy-4-methyl-2-pentanone (side product) from the major product.

To distinguish 4-hydroxy-4-methyl-2-pentanone (side product) from the major product using physical properties, you should consider the following factors:

1. Molecular weight: Calculate the molecular weight of both the side product and the major product. Different molecular weights result in different physical properties.

2. Boiling point: The boiling point of each compound may vary, so compare their boiling points to distinguish between them.

3. Melting point: Like the boiling point, the melting point of each compound may be different, allowing you to differentiate them.

4. Solubility: Check the solubility of both compounds in different solvents. Their solubility may differ in various solvents, helping you identify each compound.

5. Polarity: Determine the polarity of each compound by looking at their molecular structures. Different polarities can affect various physical properties, such as solubility and boiling points.

6. Spectroscopy: Analyze the compounds using spectroscopic techniques like infrared (IR), nuclear magnetic resonance (NMR), or mass spectrometry (MS). Each compound will have unique spectroscopic properties, which can be used for identification.

By comparing and analyzing these physical properties, you can distinguish 4-hydroxy-4-methyl-2-pentanone (side product) from the major product.

To know more about Spectroscopy :

https://brainly.com/question/31594990

#SPJ11

The pH of the solution after the addition of 60 mL of titrant (HCl) is 8.5. This is because when the titrant is added, the reaction between NH3 and HCl takes place, forming NH4Cl, which is an acidic species.

pH is a measure of the acidity or alkalinity of a solution. It is measured on a scale from 0-14, with 7 being neutral. A pH below 7 is considered acidic, while a pH above 7 is considered basic or alkaline. Solutions with a pH less than 7 are said to be acidic, and solutions with a pH greater than 7 are said to be basic. pH is an important parameter in many chemical and biological processes, as it can affect the solubility, reactivity, and stability of the molecules in a solution.

The pH of the solution after the of 90 mL of titrant (HCl) is 6.5. This is because the reaction between NH3 and HCl continues until all of the NH3 is consumed, and the pH of the solution continues to decrease as the amount of HCl increases.

To learn more about pH

https://brainly.com/question/172153

#SPJ4

The transformation of energy from one form to another is the process by which energy changes from one type to another. This process can happen in many different ways, such as through chemical reactions, physical changes, or electromagnetic radiation.

One common example of energy transformation is the conversion of electrical energy to light energy in a light bulb. When an electric current flows through the filament of a light bulb, it causes the filament to heat up and emit light. In this process, the electrical energy is transformed into thermal energy, which in turn is transformed into light energy.

Another example of energy transformation is the conversion of potential energy to kinetic energy in a roller coaster. When the coaster is at the top of a hill, it has potential energy due to its height above the ground. As it moves down the hill, this potential energy is transformed into kinetic energy, which is the energy of motion.

The coaster continues to convert between these two forms of energy as it moves through the track, with potential energy increasing at the top of each hill and kinetic energy increasing as it accelerates down each slope.

Overall, energy transformation is an important concept in understanding how energy is used and conserved in various systems, from the natural world to modern technology.

To know more about electromagnetic radiation, visit:

https://brainly.com/question/10759891#

#SPJ11

i. The frequency of this transition is 3.18 × 10¹⁵ Hz.

i. Use the relationship E = hf to find the frequency (f) of the photon:

E = hf

f = E/h

f = (2.11 × 10–18 J) / (6.626 × 10⁻³⁴ J s)

f ≈ 3.18 × 10¹⁵ Hz

ii. This transition shows that the energy of a photon is quantized because the electron in a hydrogen atom can only exist in certain energy levels (quantum states). When an electron moves from a higher energy level to a lower energy level, it must release energy in the form of a photon with a specific frequency and energy.

C. According to the Pauli exclusion principle, no two electrons in an atom can have the same set of four quantum numbers. The quantum numbers are:

n: the principal quantum number (positive integer values)

l: the azimuthal quantum number (integer values from 0 to n-1)

ml: the magnetic quantum number (integer values from -l to l)

ms: the spin quantum number (+1/2 or -1/2)

Since there can only be one electron in an atom with the specified quantum numbers, and since the Pauli exclusion principle forbids two electrons from having the same set of quantum numbers, it follows that an electron cannot have the quantum numbers n = 3, l = 0, ml = 1, or ms = +.

Find out more on transition here: https://brainly.com/question/790953

#SPJ1

The gas must be decreased to a volume of 4.4 L to be under STP. The answer is option (a).

Using the ideal gas law, PV=nRT, we can solve for the number of moles of gas:

n = PV/RT

where P is pressure, V is volume, R is the gas constant (0.0821 L·atm/mol·K), and T is temperature in Kelvin.

First, we need to convert the temperature to Kelvin:

52.0°C + 273.15 = 325.15 K

Then we can calculate the number of moles of gas:

n = (89.9 kPa)(15 L)/(0.0821 L·atm/mol·K)(325.15 K) = 0.703 mol

To find the volume at standard temperature and pressure (STP), we can use the fact that at STP, the pressure is 1 atm and the temperature is 273.15 K. So we can set up a ratio:

(P1)(V1)/(n1)(T1) = (P2)(V2)/(n2)(T2)

where P1 = 89.9 kPa, V1 = 15 L, n1 = 0.703 mol, T1 = 325.15 K, P2 = 1 atm, T2 = 273.15 K, and we want to solve for V2:

(89.9 kPa)(15 L)/(0.703 mol)(325.15 K) = (1 atm)(V2)/(0.703 mol)(273.15 K)

V2 = (1 atm)(15 L)(0.703 mol)(273.15 K)/(89.9 kPa)(325.15 K) = 4.4 L

Therefore, the gas must be decreased to a volume of 4.4 L to be under STP. The answer is option (a).

To know more about ideal gas law refer to-

https://brainly.com/question/30458409

#SPJ11

Complete question

A quantity of gas has a volume of 15 liters at 52. 0°C and 89. 9 kPa of pressure. To what volume must the gas be decreased for the gas to be under standard temperature and pressure conditions?

a. 4. 4L

b. 8. 7L

c. 0. 39 L

d. 11L

75% of the calves will be black, 25% will be red. The correct answer is C.

This is because the black bull is heterozygous for the black coat color gene (Bb), meaning it carries both a dominant black allele (B) and a recessive red allele (b).

The red cow is homozygous recessive for the red coat color gene (bb), meaning she carries two copies of the recessive red allele (b).

When these two parents are crossed, their offspring will inherit one allele from each parent to determine their coat color.

Since black is dominant over red, any calf that inherits a black allele (B) from the bull will have a black coat color.

Therefore, the possible offspring genotypes are BB (black), Bb (black), and bb (red).

BB: black (because it inherits a dominant black allele from the bull and a dominant black allele from the cow)

Bb: black (because it inherits a dominant black allele from the bull, but a recessive red allele from the cow)

bb: red (because it inherits a recessive red allele from each parent)

The probability of each genotype is 25% BB, 50% Bb, and 25% bb.

Since BB and Bb both result in black coat color, the predicted proportion of black calves is 75%. The predicted proportion of red calves is 25%.

to know more about genotypes refer here:

https://brainly.com/question/29156144#

#SPJ11

The probability of a random sample of n=9 sections of PVC pipe having a mean diameter between 1.009 inches and 1.012 inches is approximately 0.8185 or 81.85%.

The mean diameter of PVC pipe is 1.01 inches, and the standard deviation is 0.003 inches. We are asked to find the probability that a random sample of n=9 sections of the pipe will have a sample mean diameter greater than 1.009 inches and less than 1.012 inches.

First, we need to find the standard error of the mean, which is the standard deviation divided by the square root of the sample size. In this case, the standard error is 0.003/√9 = 0.001.

Next, we can use the central limit theorem to approximate the distribution of the sample mean as a normal distribution with a mean of 1.01 inches and a standard deviation of 0.001 inches (the standard error we just calculated).

We can then calculate the z-scores for the lower and upper limits of the sample mean:

z1 = (1.009 - 1.01)/0.001 = -1

z2 = (1.012 - 1.01)/0.001 = 2

Using a z-table or calculator, we can find the probability of the sample mean falling within this range:

P(-1 < Z < 2) = P(Z < 2) - P(Z < -1) = 0.9772 - 0.1587 = 0.8185

Therefore, the probability of a random sample of n=9 sections of PVC pipe having a mean diameter between 1.009 inches and 1.012 inches is approximately 0.8185 or 81.85%.

To know more about probability, visit:

https://brainly.com/question/30034780#

#SPJ11

Answer: Friction causes kinetic energy (rubbing your hands together) to convert to heat energy.

Explanation:

The expression that describes the heat evolved in a chemical reaction when carried out at constant pressure is ΔH = ΔE - w. Here, ΔH represents the enthalpy change, ΔE represents the internal energy change (also symbolized as ΔU), and w represents the work done.

Enthalpy is the sum of the internal energy of a system and the product of its pressure and volume. At constant pressure, the change in enthalpy is equal to the heat evolved or absorbed in the reaction. This is because any work done during the reaction is accounted for in the change in volume term of enthalpy, and at constant pressure, this term is constant. Therefore, the heat evolved or absorbed in the reaction is solely responsible for the change in enthalpy.

When a chemical reaction is carried out at constant pressure, the heat evolved in the reaction can be described using the symbol q, which represents heat. This is because, at constant pressure, the change in internal energy (symbolized by ΔE or ΔU) is equal to the heat absorbed or released in the reaction (represented by q) minus any work done (represented by w). Therefore, to explain the heat evolved in a chemical reaction at constant pressure, we would use the symbol q.

Learn more about internal energy at https://brainly.com/question/25737117

#SPJ11

33,163.52 grams of oxygen were involved in the phase change.

To find the number of grams of oxygen involved in this phase change, we will use the enthalpy of fusion (ΔHfus) since it's a change from solid to liquid. The formula we'll use is:

q = n × ΔHfus

Where q is the heat absorbed (456 kJ), n is the number of moles, and ΔHfus is the enthalpy of fusion (0.44 kJ/mol). First, we'll find the number of moles (n):

456 kJ = n × 0.44 kJ/mol

n = 456 kJ / 0.44 kJ/mol
n ≈ 1036.36 moles

Now that we have the number of moles, we can find the grams of oxygen using the molar mass of oxygen (O2), which is 32 g/mol:

mass = n × molar mass

mass ≈ 1036.36 moles × 32 g/mol
mass ≈ 33163.52 grams

Therefore, approximately 33,163.52 grams of oxygen were involved in the phase change.

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

In the discussion section of a recrystallization of organic compounds lab report, it is important to address the key aspects of the experiment, including the choice of solvent, the process of recrystallization, and the purity of the final product.

The choice of solvent plays a crucial role in the success of the recrystallization process. An ideal solvent should dissolve the organic compound when heated but allow the compound to recrystallize upon cooling. Additionally, impurities should either remain soluble in the cooled solvent or be insoluble in the hot solvent to ensure effective separation.

During the recrystallization process, the organic compound is dissolved in a hot solvent and allowed to cool slowly. As the solution cools, the solubility of the compound decreases, leading to the formation of crystals. The crystals are then collected by filtration, leaving the impurities behind in the solvent.

To assess the purity of the recrystallized product, techniques such as melting point determination or spectroscopic methods (e.g., infrared spectroscopy, NMR) can be employed. A narrow melting point range or consistent spectroscopic data with the reference compound indicate a high degree of purity.

In summary, recrystallization is a critical technique for purifying organic compounds, and the choice of solvent, proper execution of the recrystallization process, and purity analysis are all essential components of a successful lab report discussion.

Know more about Recrystallization here:

https://brainly.com/question/29215760

#SPJ11

The theoretical yield of silver chloride is 5.05 grams.

The percentage yield of silver chloride is 72.1%.

The balanced chemical equation for the reaction between silver nitrate and sodium chloride is:

AgNO3 + NaCl → AgCl + NaNO3

a. To determine the theoretical yield of silver chloride, we need to calculate the amount of silver chloride that would be produced if all of the silver nitrate reacted. We can use stoichiometry to do this.

From the balanced equation, we see that 1 mole of silver nitrate reacts with 1 mole of sodium chloride to produce 1 mole of silver chloride. The molar mass of silver nitrate is 169.87 g/mol, and the molar mass of silver chloride is 143.32 g/mol.

First, we need to convert the mass of silver nitrate given to moles:

moles of AgNO3 = 5.98 g / 169.87 g/mol = 0.0352 mol AgNO3

Since the reaction is with excess NaCl, we know that all the silver nitrate will react, so the theoretical yield of AgCl is:

theoretical yield = 0.0352 mol AgCl x 143.32 g/mol = 5.05 g AgCl

Therefore, the theoretical yield of silver chloride is 5.05 grams.

b. To determine the percentage yield of silver chloride, we need to compare the actual yield (3.64 g) to the theoretical yield (5.05 g), and calculate the ratio as a percentage:

percentage yield = (actual yield / theoretical yield) x 100%

percentage yield = (3.64 g / 5.05 g) x 100% = 72.1%

Therefore, the percentage yield of silver chloride is 72.1%.

Learn more on theoretical yield here https://brainly.com/question/31082729

#SPJ1

The reactions that will occur for each activity series include:

Reactive metals are metals that easily undergo chemical reactions with other substances, particularly with acids and water, to form new compounds. These metals are usually found in the lower part of the activity series, which means they have a high tendency to lose electrons and form cations.

Examples of reactive metals include alkali metals (such as lithium, sodium, and potassium) and alkaline earth metals (such as calcium and magnesium).

Find out more on reactive metals here: https://brainly.com/question/25103661

#SPJ1

Image trancribed:

Based on the activity series, which of the reactions will occur?

Least Reactive

Most Reactive Li Na K Mg Al Zn Fe Ni Sn Pb H Cu Ag Pt F₂ Cl₂ Br₂ I₂

Hint: Is the metal element more reactive than the metal ion in the compound?

A. Mg + NaNO3 →

B. AI+NISO4→

C. Zn + NaNO3 -

D. Sn+ Zn(NO3)2 →

Answer:A. Mg + NaNO₃ →

Explanation:

will occur since Mg is more reactive than Na.

The equilibrium concentrations for [OH-], hydroxylamine [HONH2], and the hydroxylammonium ion [CH3NH3+] in a 0. 025 M solution of hydroxylamine is 8.34 x 10^-5 M, 0.0249 M,  and 8.34 x 10^-5 M.

To calculate the equilibrium concentrations for [OH-], hydroxylamine [HONH2], and the hydroxylammonium ion [CH3NH3+] in a 0.025 M solution of hydroxylamine, we first need to write out the balanced chemical equation for the reaction:

HONH2 + H2O ⇌ HONH3+ + OH-

Next, we can set up an ICE table to help us solve for the equilibrium concentrations:

Initial:    HONH2 = 0.025 M    H2O = 0 M    HONH3+ = 0 M    OH- = 0 M
Change:   -x                +x           +x           +x
Equilibrium:  0.025 - x      x            x            x

We can then use the Kb expression for hydroxylamine to solve for x, which represents the concentration of OH-:

Kb = [HONH3+][OH-] / [HONH2]

1.1 x 10^-8 = x^2 / (0.025 - x)

Solving for x using the quadratic formula, we get:

x = 8.34 x 10^-5 M

Therefore, the equilibrium concentrations are:

[OH-] = 8.34 x 10^-5 M
[HONH2] = 0.025 - x = 0.025 - 8.34 x 10^-5 = 0.0249 M
[HONH3+] = x = 8.34 x 10^-5 M
[CH3NH3+] = 0 M (since it is not involved in the reaction)

Know more about Kb expression here:

https://brainly.com/question/16271750

#SPJ11

To solve this problem, we need to use the law of conservation of mass which states that the total mass of reactants equals the total mass of products in a chemical reaction. In this case, we know the mass of the element m and the mass of the compound m3n2 that is produced.

(i) To find the molar mass of the element, we need to first determine the number of moles of the compound produced. We can do this by dividing the mass of the compound by its molar mass.

molar mass of m3n2 = (molar mass of m x 3) + (molar mass of n x 2)
We can find the molar mass of the compound m3n2 by adding the molar mass of three atoms of element m and two atoms of nitrogen. The molar mass of nitrogen is 14 g/mol, and we can use the mass of the compound (43.5 g) to find its molar mass:

molar mass of m3n2 = (molar mass of m x 3) + (molar mass of n x 2)
43.5 g/mol = (3x molar mass of m) + (2x 14 g/mol)
43.5 g/mol - (2x14 g/mol) = 3x molar mass of m
15.5 g/mol = 3x molar mass of m
molar mass of m = 15.5 g/mol / 3 = 5.17 g/mol

So, the molar mass of element m is 5.17 g/mol.

(ii) To find the name of the element, we need to look at the periodic table and find an element with a molar mass close to 5.17 g/mol. From the periodic table, we see that the closest element is boron (B), which has a molar mass of 10.81 g/mol.

Therefore, the element m in this reaction is boron (B).

In summary, we can use the law of conservation of mass and the molar mass of the compound produced to determine the molar mass and name of the element reacted with nitrogen. In this case, we found that the element is boron with a molar mass of 5.17 g/mol.

To know more about  conservation refer here

https://brainly.com/question/29220242#

#SPJ11

In a reaction mechanism, the rate-determining step is the slowest step with the highest activation energy. The correct answer is option c.

This is because the rate of the overall reaction is determined by the speed of the slowest step, as it limits the rate at which the reaction can occur. The activation energy is the minimum energy required for a reaction to occur, and the higher the activation energy, the slower the reaction rate will be.

Identifying the rate-determining step is important for understanding and controlling the rate of a chemical reaction.

By knowing which step is the slowest, chemists can focus on optimizing conditions for that step to increase the overall reaction rate. This can involve adjusting the temperature, pressure, and concentrations of reactants, as well as adding catalysts to lower the activation energy of the rate-determining step.

Overall, understanding the rate-determining step is critical for designing and optimizing chemical reactions in fields ranging from industrial chemistry to drug discovery.

The correct answer is option c.

To know more about activation energy refer to-

https://brainly.com/question/28384644

#SPJ11

The pair of elements that have the most similar Lewis structures are F and Ne.

The Lewis structure of an atom shows its valence electrons as dots around the symbol representing the nucleus. Atoms with similar Lewis structures have similar numbers of valence electrons and, therefore, similar chemical properties.

N and S have different numbers of valence electrons (5 and 6, respectively), so their Lewis structures are different.

P and F have different numbers of valence electrons (5 and 7, respectively), and the placement of the dots on their Lewis structures is different.

F and Ne both have 7 valence electrons and would have similar Lewis structures, with one dot representing each valence electron. They are both nonmetals and are found in the same period of the periodic table, which also contributes to their similar chemical properties.

To know more about Lewis structures, refer here:

https://brainly.com/question/20300458#

#SPJ11

6) The limiting reactant is benzene.

7) Ni is the limiting reactant.

For the first reaction:

a) To determine the limiting reactant, compare the number of moles of each reactant with their stoichiometric coefficients, benzene:

Molar mass of benzene (C₆H₆) = 78.11 g/mol

Number of moles of benzene = 45.0 g / 78.11 g/mol = 0.5765 mol

Calculate the number of moles of chlorine:

Molar mass of chlorine (Cl₂) = 70.91 g/mol

Number of moles of chlorine = 450 g / 70.91 g/mol = 6.344 mol

The stoichiometric coefficient of benzene is 1 and the stoichiometric coefficient of chlorine is also 1. Therefore, the limiting reactant is benzene, as it produces fewer moles of product than the amount of chlorine available.

b) To calculate the mass of excess reactant, find out how much of the excess reactant is left after the reaction, determine the amount of chlorine that reacts:

From the balanced chemical equation, 1 mole of benzene reacts with 1 mole of chlorine to produce 1 mole of chlorobenzene and 1 mole of hydrogen chloride.

0.5765 mol of benzene reacts with 0.5765 mol of chlorine, according to the equation. Therefore, the amount of excess chlorine is:

6.344 mol - 0.5765 mol = 5.7675 mol

The mass of excess chlorine is:

5.7675 mol x 70.91 g/mol = 409.1 g

c) The molar mass of chlorobenzene (C₆H₅Cl) is 112.56 g/mol. Since 1 mole of benzene produces 1 mole of chlorobenzene, the number of moles of chlorobenzene produced is equal to the number of moles of benzene reacted:

0.5765 mol of chlorobenzene is produced.

The mass of chlorobenzene produced is:

0.5765 mol x 112.56 g/mol = 64.85 g

7. For the second reaction:

a. To determine the limiting reactant, we need to compare the number of moles of each reactant to the stoichiometric coefficients in the balanced chemical equation. The balanced equation is:

Ni + 2HCl → NiCl₂ + H₂

The molar masses of Ni and HCl are 58.69 g/mol and 36.46 g/mol, respectively. Using these values, calculate the number of moles of each reactant:

Number of moles of Ni = 5.00 g / 58.69 g/mol = 0.085 mol

Number of moles of HCl = 2.50 g / 36.46 g/mol = 0.069 mol

Since the stoichiometric coefficient of Ni is 1 and the stoichiometric coefficient of HCl is 2, Ni is the limiting reactant.

b. To calculate the amount of excess reactant, first determine the theoretical amount of HCl needed to react completely with the amount of Ni present. From the balanced equation, 1 mole of Ni reacts with 2 moles of HCl. Therefore, the theoretical amount of HCl needed is:

Theoretical amount of HCl = 0.085 mol Ni × (2 mol HCl/1 mol Ni) = 0.17 mol HCl

The actual amount of HCl present is 0.069 mol, so the amount of excess HCl is:

Excess HCl = 0.17 mol - 0.069 mol = 0.101 mol

Convert this amount to grams using the molar mass of HCl:

Excess HCl mass = 0.101 mol × 36.46 g/mol = 3.69 g HCl

Therefore, 3.69 g of HCl will remain unreacted.

c. From the balanced equation, we can see that 1 mole of Ni produces 1 mole of NiCl₂. Therefore, the amount of NiCl₂ produced is equal to the amount of Ni reacted, which is 0.085 mol. Convert this amount to grams using the molar mass of NiCl₂:

Mass of NiCl₂ produced = 0.085 mol × 129.60 g/mol = 11.02 g NiCl₂

Therefore, 11.02 g of NiCl₂ will be produced.

Find out more on Chlorine and nickel here: https://brainly.com/question/26744380

#SPJ1