Answer:
212N/m
Explanation:
First of all, what is spring constant
As per Hooke's law, The restoring force applied by the spring is proportional to the change in length, and restoring force is directed towards the equilibrium position. The proportionality constant is called the spring constant and it is a measure of the stiffness of the spring. So as Hooke's law
F = -Kx
Where
F -> Restoring force
K-> Spring constant
x -> change in length
the negative sign indicates it is acting toward the center
Rearranging this for the Spring constant, Spring constant formula is given by
k = Fx
Unit of Spring Constant is Newton/meter
Water flows through a pipe of diameter 8.0 cm with a speed of 10.0 m/s. It then enters a smaller pipe of diameter 3.0 cm. What is the speed of the water as it flows through the smaller pipe? (4) Water flows through a pipe of diameter 8.0 cm with a speed of 10.0 m / s . It then enters a smaller pipe of diameter 3.0 cm . What is the speed of the water as it flows through the smaller pipe ? ( 4 )
Answer:
71m/s
Explanation:
when you convert it you get 158.822 miles per hour
Honey bees beat their wings, making a buzzing sound at a frequency of 2.3 × 102 hertz. What is the period of a bee's wing beat?
It just so happens that regardless of the material, when objects are heated up they will start to glow and change colors at near identical temperatures. The plot that you see is called a blackbody spectrum. This plot tells us the intensity or the “amount” of light that an object will emit at different wavelengths (or “colors”). The visible wavelengths are marked by their colors on the plot. To the right of the visible band is lower energy infrared light. To the left of this band is higher energy ultraviolet (UV) light.
Click the + button that is to the left of the intensity scale (far left side of the screen) such that the top of the scale is at 1x10-3 (in the picture above, the top of the scale says 100).
Now use the temperature slider to the right, and take the temperature all the way down to 300 Kelvin (80 Fahrenheit).
Now slowly begin to raise the temperature. At approximately what temperature would a heated material (metal, wood, etc.) begin to give off visible light at a deep red color?
Answer: the plot that you see is called a blackbody spectrum. This plot tells us the intensity or the amount of light that an object will emit at different wavelenths.
Explanation: i hope that this helps
A 2.0-V battery is connected in a circuit with an ammeter and an unknown resistor, P. The current is observed to be 0.70 A. What would be the current in the circuit if a 12-V battery replaces the 2.0-V battery?
Answer:
4.2 A
Explanation:
V=IR
V= voltage
I= Current
R= resistance
so you will find the resistance in the circuit so
R= V/I
R=2V/0.70A
R=2.857 ohms ( TO THE NEAREST THOUSANDTH)
then you will find the current of the 12V battery using the resistance in the circuit
I=V/R
I=12/2.857
I=4.2A (TO THE NEAREST TENTH)
Places rich in limestone and gypsum have hard water . why ??
Answer:
Hard water is formed when water percolates through deposits of limestone, chalk or gypsum which are largely made up of calcium and magnesium carbonates, bicarbonates and sulfates.
Explanation:
Hard water is formed when water percolates through deposits of limestone, chalk or gypsum which are largely made up of calcium and magnesium carbonates, bicarbonates and sulfates.
Answer:
Hard water indicates a high amount of minerals.
Explanation:
This most often occurs when natural water sources pass through mineral deposits such as limestone or chalk. The process leads to a relatively high level of calcium, iron, and magnesium.
Waves can carry either ____ or __________ energy?
Answer:
ways can carry either __machanical___ or electromagnetic energy
You turn on a cars radio, what energy transformation is taking place?
Answer:
C probably
Explanation:
think c because when you first start the car the first thing you hear electrical sound.
velocity and distance of free falling object dropped from rest
The diagram shows the speed and distance of a free-falling item dropped from rest. In the attachment, there is a graph.
What is velocity?The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.
The velocity and the time at the different points are;
A(0 sec ,0 m/sec)
B(1,9.8)
C(2,19.6)
D(3,29.4)
E(4,39.2)
F(5,49.0)
The point is plotted on the graph and get the graph.
The graph is attached in the attachment.
The complete question is;
Velocity and distance of free-falling object dropped from rest are given in the digrame. Draw the velocity-time graph for the given conditions.
To learn more about the velocity, refer to the link: https://brainly.com/question/862972.
#SPJ1
On Earth, a scale shows that you weigh 490 N. What is your mass?
A 50 kg
B 100 kg
c) 75 kg
D 22 kg
Answer:
a
Explanation:
the primary coil of a transformer has 480 turns, and the secondary has 112 turns. when an ac voltage of 28.0 v is applied to the primary, what is the output voltage in the secondary?
The voltage of the secondary will be 36 V.From the given conditions primary transformer has 3 times as many turns in the secondary coil.
What is induced voltage?Electromagnetic induction is what causes the induced voltage. Electromagnetic induction is the process of generating emf (induced voltage) by subjecting a conductor to a magnetic field.
Given data;
No turns in the primary coil,[tex]\rm N_p = 480 turns[/tex]
No turns in the secondary coil,[tex]\rm N_s = 112 turns[/tex]
The voltage of the primary coil,[tex]\rm V_p = 28 v[/tex]
The voltage of the secondary coil,[tex]\rm V_s = ?[/tex]
For a transformer,
[tex]\rm \frac{V_p}{V_s}= \frac{N_p}{N_s} \\\\ \rm \frac{28}{V_s}= \frac{480}{112} \\\\ V_s = 6.53 \ v[/tex]
Hence the voltage of the secondary will be 36 V.
To learn more about the induced voltage refer to the link;
https://brainly.com/question/19482771
#SPJ1
Answer: 6.53
Explanation: I had the same question and here's what I got:
Values:
Vp (Primary Voltage) = 28.0
Ns (Secondary Number of Turns) = 112
Np (Primary Number of Turns) = 480
Vs = Vp Ns/Np
= (28)(112)/(480)
Vs = 6.53 (FINAL ANSWER)
What’s the allowable ampacity of a No. 12 copper wire with type THHN insulation installed in a raceway with 35 wires? Question 3 options: A) 10 A B) 15 A C) 8 A D) 12 A
The allowable ampacity of a No. 12 copper wire with type THHN insulation installed in a raceway with 35 wires is approximately 12 amperes. This is best represented by option D.
According to the National Electrical Code Table (NEC), a derating factor must be applied for any raceway with more than three current-carrying conductors (in our case, copper wires). In a raceway with 31-40 current-carrying conductors, the derating factor is 50%. Because the ampacity of a No. 12 copper wire usually is 25 amperes (A), we can multiply this by our derating factor to find that:
25 • 0.50 = 12.5
The exact allowable ampacity of this copper wire is 12.5 amperes; however, we can round down to find that the closest answer is 12 A.
Hence, option D represents the best answer.
Answer:
D) 12 A
Explanation:
You want to know the allowable ampacity of AWG 12 type THHN copper wire in a raceway with 35 wires.
Nominal ampacityTable 310.15(B)(16) of the 2017 National Electrical Code gives the nominal rating of AWG 12 type THHN copper wire as 30 A when installed in an environment with a temperature of 30 °C or less.
DeratingTable 310.15(B)(3)(a) gives the adjustment factor when there are more than three conductors in a raceway or cable. For 31–40 conductors, the ampacity must be derated to 40% of its nominal value.
In a raceway with 35 wires, the allowable ampacity of THHN AWG 12 wire is ...
(30 A)(0.40) = 12 A
__
Additional comment
For environmental temperatures above 30 °C, Table 310.15(B)(2)(a) gives additional derating factors. The adjustment factor for temperatures up to 50 °C (122 °F) is 0.82, which would bring the allowable ampacity down to about 9.8 A.
Select the correct answer.
What is the average velocity of the particle from rest to 9 seconds?
The average velocity of the particle from rest to 9 seconds would be 2 meters/sec.
How to find the average velocity?This average velocity can be calculated with the following equation:
v = dx / dt
where:
dx = displacement = 18 meters
dt = interval of time = 9 seconds
Substitute;
v = dx / dt
v = 18 / 9
v = 2 meters/sec
Hence, the average velocity of the particle from rest to 9 seconds would be 2 meters/sec.
Learn more about velocity here;
https://brainly.com/question/14434909
#SPJ1
A rocket is fired with an initial VELOCITY OF 100m/s at an angle of 55° above the horizontal, It explodes On the mountain Side 12s after its Firing What is X - and y-coordinates of the rocket relative to its Firing Point?
Answer
688.32m and 277.44m
Explanation :
⠀
[tex] \large{\maltese{\textsf{\underline{To find :-}}}} [/tex]
The X and Y coordinates of the rocket relative of firing
⠀
⠀
[tex] \large{\maltese{\textsf{\underline{Given :-}}}} \\ \\ \sf velocity (v_i) = 100m{s}^{-1} \\ \sf angle ({\theta}_{1}) = 55.0{\degree} \\ \sf time (t) = 12s [/tex]
⠀
⠀
[tex] \Large{\maltese{\textsf{\underline{\underline{Step by Step Solution:-}}}}} [/tex]
⠀
⠀
The horizontal range of projectile at x.
⠀
[tex] \sf \large{x = v_{xi}} \times t \\ \\ \sf \large{x = v_i \times \cos {\theta}_{i} \times t} [/tex]
⠀
⠀
[tex] \large\textsf{\underline{Now substituting the required values}} [/tex]
⠀
⠀
[tex] \sf x = 300 \times \cos 55{\degree} \times 12 \\ \\ \sf x = 100 \times 0.5756 \times 12 \\ \\ {\underline{\boxed{\bold{ x = 688.32m}}}} [/tex]
⠀
⠀
The vertical position of projectile at y.
⠀
⠀
[tex]\sf \large y = v_{yi} \times t - (\frac{1}{2} \times g \times {t}^{2}) \\ \\ \sf \large y = v_i \times \cos \theta \times t - \frac{1}{2} g {t}^{2} [/tex]
⠀
⠀
[tex]\textsf{ \large {\underline{Now substituting the required values}} } [/tex]
⠀
⠀
[tex] \sf y = 100 \times \cos55{ \degree} \times 12 - \frac{1}{2} \times 9.80 \times {12}^{2} \\ \\ \sf y = 100 \times 0.8192 \times 12 - 0.5 \times 9.8 \times 144 \\ \\ \sf y = 983.04 - 705.6 \\ \\ \underline{ \boxed{ \bold{y = 277.44m}}} [/tex]
⠀
⠀
⠀
Henceforth, the distance at horizon is 688.32m and at vertical is 277.44m.Two charged particles are near each other – the charge magnitudes are +3 uC and +7 uC, respectively. The electrostatic force between these charges is 25 N. A charged particle of -1 uC is added to both of the original two charges. What is the electrostatic force between the two charged particles after the -1 uC charge is added?
Answer:
Approximately [tex]14\; {\rm N}[/tex].
Explanation:
By Coulomb's Law, the magnitude of the electrostatic force between two charges is proportional to the product of the magnitudes of the two charges.
For example, consider charges of magnitude [tex]q_{1}[/tex] and [tex]q_{2}[/tex] that are apart from one another by a distance of [tex]r[/tex] in between. Let [tex]k[/tex] denote Coulomb's constant. By Coulomb's Law, the magnitude of electrostatic force between the two charges would be:
[tex]\displaystyle F = \frac{k\, q_{1}\, q_{2}}{r^{2}}[/tex].
In this question, the product of the magnitude of the two charges was originally [tex]3\; {\rm \mu C} \times 7\; {\rm \mu C} = 21\; {\rm (\mu C)^{2}}[/tex]. After [tex](-1\; {\rm \mu C})[/tex] is added to each charge, product of the magnitude of the two charges would become [tex](3 - 1)\; {\rm \mu C} \times (7 - 1)\; {\rm \mu C} = 12\; {\rm (\mu C)^{2}}[/tex].
Thus, the product of the magnitude of the two charges has been scaled to [tex]12\; {\rm \mu C}[/tex] from [tex]21\; {\rm \mu C}[/tex] . The magnitude of the electrostatic force between the two charges would be scaled from [tex]25\; {\rm N}[/tex] to [tex]25\; {\rm N} \times (12 / 21) \approx 14\; {\rm N}[/tex].
Bianca is helping the theatre director at her school with lighting, sound, and set design for a school play. She will be choosing the materials that will be used on stage and on the walls of the theatre. After she reads the script and makes observations inside the theatre, she makes the following list of the factors to consider in her design.
The echoes throughout the theatre need to be reduced.
The set should not reflect too much light into the audience’s eyes.
The only lights available are white, purple, and yellow. The filters available are red and blue.
The blue sky on the set should appear black for Act 2.
Bianca draws a detailed illustration of her plan to show the theatre director. She labels it with the materials she plans to use.
Design Solutions: Based on Bianca’s criteria and model, which materials would you change on stage? Explain your reasoning
Bianca is helping the theatre director at her school with lighting, sound, and set design for a school play. She will be choosing the materials that will be used on stage and on the walls of the theatre the materilas neee to be changes is The only lights available are white, purple, and yellow.
What is echo ?A proper echo is a single mirrored image of the sound source. The phrase echo derives from the Greek ἠχώ (ēchō), itself from ἦχος (ēchos), "sound". Echo withinside the Greek peoples tale is a mountain nymph whose cappotential to talk changed into cursed, leaving her capin a position handiest to copy the ultimate phrases spoken to her.
Bianca draws a detailed illustration of her plan to show the theatre director. She labels it with the materials she plans to use the only lights available are white, purple, and yellow should be removed as to avoid the light refraction.
Read more about the echo:
https://brainly.com/question/27272110
#SPJ1
What type of power plant burns material to make electricity?
O A. Geothermal
OB. Hydroelectric
OC. Fossil fuel
OD. Radiant
The type of power plant burns material to make electricity is Fossil fuel. The correct option is C.
What is energy?Energy is the ability to do work.
There are different kind of energies like kinetic energy, potential energy, gravitational energy and heat energy.
The energy obtained from burning different type of materials like Coal, gas and oil and produces heat.
Fossil fuel power plants burn coal or oil to create heat and generate steam to run turbines which generate electricity.
Thus, the correct option is C.
Learn more about energy.
brainly.com/question/1932868
#SPJ1
PLEASE ANSWER THIS FAST
The electric field lines show the way (blank) charges would move if they were in the field brainly.
Answer:
Explanation:
If a positive charge is moving in the direction of electric field vector, its velocity will increase, whereas positive charge moving opposite to the direction of the electric of electric field will decelerate.
The case with a negative charge is just reversed verse, it will decelerate when moving along the field direction and accelerate when moving opposite to it.
An object has a displacement of 45
degrees. Convert this displacement
to minutes.
[?] minutes
Answer:
45° to min.
1° ----> 60 min
45° ----> ?.
45 * 60
2700 min
2700 minSet up the Applied Force (force exerted) on both crates with the current Friction setting at 350 N. On Part 2, draw a force diagram that includes all external forces acting on the two crates
The acceleration will be constantly equal to 1 m/s².Option c is correct.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
Force is defined as the product of mass and acceleration. Its unit is Newton.
Given data;
Force,F = 350 N
Friction force,f=350 N
F=f
Because the frictional and applied forces on the two boxes are of equal strength, both move at the same pace. As a result, the acceleration will be constantly equal to 1 m/s².
Hence option c is correct.
To learn more about the force refer to the link;
https://brainly.com/question/26115859#SPJ1
#SPJ1
A car headed north at 15.0 m/s experiences an acceleration of 2.50 m/s2 for 3.00 s. What is the final velocity of the car?
Answer:
i dond no can you put another question
One mole of a substance contains 6.02 × 1023 protons and an equal number of electrons. If the protons could somehow be separated from the electrons and placed in very small, individual containers separated by a million meters, what would be the magnitude of the electrostatic force exerted by one box on the other?
Explanation:
it is almost zero .this is because the distance and the electrostatic force are inversely proportional
an object is held 33.5 cm from a convex mirror. it creates a virtual image of magnification 0.253. what is the focal length of the mirror?
Answer:
Magnification= -image distance/object distance
.253=image distance/33.5
image distance= 8.48 cm
Which picture shows a boat riding on a trough?
Select one:
a. A
b. B
c. C
d. D
Answer:
B
Explanation:
What is the acceleration of the object?
m/s²
Answer:
-2.5m/s^2
Explanation:
10-40/12-0=-2.5
Q3, A ball of mass 5.0 kg moving with a Velocity of 10.0 ms collides
with a 15.0 kg ball moves with a Velocity of 4 ms! If both balls
Stick together after Collision, Calculate their Common Velocity after Impact if they initially moves in The Same direction, and Opposite direction.
Answer:
Their common velocity after the collision will be 5.5m/s
Explanation:
look at the attachment above ☝️
Question 4 of 20
If the distance between two objects is doubled, what happens to the
gravitational force between them?
A. It decreases to 1/2 its original magnitude.
B. It increases to 2 times its original magnitude.
C. It increases to 4 times its original magnitude.
D. It decreases to 1/4 its original magnitude.
Answer:
D
Explanation:
F = G m1 m2 / r^2 now double r
F = G m1m1/ (2r)^2
F = 1/4 G m1m2/r^2 <===== this is 1/4 of the original
How is volume flow related to cross sectional area? How is it related to fluid pressure?
Answer:
A venturi meter is used to measure the flow speed of a fluid in a pipe. The meter is connected between two sections of the pipe (the figure); the cross-sectional area A of the entrance and exit of the meter matches the pipe's cross-sectional area. Between the entrance and exit, the fluid flows from the pipe with speed V and then through a narrow ''throat'' of cross-sectional area a with speed v. A manometer connects the wider portion of the meter to the narrower portion. The change in the fluid's speed is accompanied by a change Δp in the fluid's pressure, which causes a height difference h of the liquid in the two arms of the manometer. (Here Δp means pressure in the throat minus pressure in the pipe.) Let A equal 5·a. Suppose the pressure p1 at A is 2.1 atm.
Compute the values of (a) the speed V at A and (b) the speed v at a that make the pressure p2 at a equal to zero.
(c) Compute the corresponding volume flow rate if the diameter at A is 4.0 cm.The phenomenon that occurs at a when p2 falls to nearly zero is known as cavitation. Please assume that the fluid is water. The water vaporizes into small bubbles.
identity the sentence that uses quotas and interviews.
A. let us all learn from the history of our country.
B. the guests arrived on time.
C. "My dream is to build my own mansion, "Adrian answered.
D. Teacher Cellyn Kyre ensures that her classroom is always ready for the face to face classes
Teacher Cellyn Kyre ensures that her classroom is always ready for the face to face classes is the sentence used in quotas and interviews.
What is interview?Interview is the examination of the candidate from which a person identifies the candidate is fit for the organization o r not. Maximum interview happened between the interviewer and the candidate. or sometime more people can also be present.
Thus, option D is correct.
For more details about Interview, click here:
https://brainly.com/question/15128068
#SPJ1
Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in Figure 1, the pressure is and the pipe diameter is 6.0 cm. At another point higher, the pressure is and the pipe diameter is 3.0 cm. Find the speed of flow (a) in the lower section and (b) in the upper section. (c) Find the volume flow rate through the pipe
Answer:
full explanation and answer is on the picture
A hollow conducting sphere has an inside radius of r1 = 0.17 m and an outside radius of r2 = 0.28 m. The sphere has a net charge of Q = 4.8E-06 C. What is the magnitude of the field, in newtons per coulomb, at a distance of 0.05 m from the center of the sphere?
Explanation:
JOIN MY MEETING
ID - 9384026088
PASSWORD - 1234
