What is the solution for 11\31×38\33

The area of the shaded region of the circle is 89.75 mi².

The area of a sector of a circle, you can use the formula:

A = (θ/360) × π × r²

Where A is the area of the sector, θ is the central angle of the sector, r is the radius of the circle, and π is a constant approximately equal to 3.14.

From the diagram, angle of the unshaded sector equals 150 degree.

Angle of the shaded region = 360 - 150 = 210 degree

Radius r = 7 miles.

We can substitute these values into the formula and solve for the area A.

A = (θ/360) × π × r²

A = ( 210/360 ) × 3.14 × 7²

A = ( 210/360 ) × 3.14 × 49

A = 89.75 mi²

Therefore, the area of the sector is approximately 89.75 mi².

Learn more about area of sector here: https://brainly.com/question/16367606

#SPJ1

A. The joint probability distribution is:
- P(X=2, Y=0) = 6/1332
- P(X=1, Y=1) = 36/1332
- P(X=0, Y=2) = 30/1332

B. The expected value of playing this game is approximately $0.19 each time you play.

A. To find the joint probability distribution, we need to determine the probabilities of all possible outcomes for X and Y when selecting two marbles from the bag.

There are a total of 37 marbles in the bag (3 gold, 6 silver, and 28 black).

1. Probability of selecting 2 gold marbles (X=2, Y=0):
(3/37) * (2/36) = 6/1332

2. Probability of selecting 1 gold and 1 silver marble (X=1, Y=1):
(3/37) * (6/36) + (6/37) * (3/36) = 36/1332

3. Probability of selecting 2 silver marbles (X=0, Y=2):
(6/37) * (5/36) = 30/1332

So, the joint probability distribution is:

- P(X=2, Y=0) = 6/1332
- P(X=1, Y=1) = 36/1332
- P(X=0, Y=2) = 30/1332

B. To find the expected value of playing the game, we need to calculate the probability of selecting each type of marble and multiply it by its corresponding value.

1. Probability of selecting a gold marble: 3/37
Winning amount: $3

2. Probability of selecting a silver marble: 6/37
Winning amount: $2

3. Probability of selecting a black marble: 28/37
Losing amount: -$1

Expected value = (3/37 * $3) + (6/37 * $2) + (28/37 * -$1)
= 9/37 + 12/37 - 28/37
= -7/37

So, the expected value of playing this game is -$7/37, which means you can expect to lose approximately $0.19 each time you play.

To know more about Probability click here:

https://brainly.com/question/30034780

#SPJ11

The amount of Pure alcohol must a pharamacist add to 10cm cubed of a 8% alcohol solution to strengthen it to a 80% solution is 36 cm³.

Alcohol, also known as ethanol is a clear, colorless liquid that is produced by the fermentation of sugars and carbohydrates by yeasts.

Let's start by writing down the equation that relates the amount of alcohol in the original 8% solution to the amount of alcohol in the final 80% solution:

0.08x(10 +x)

Here, x represents the amount of pure alcohol that we need to add to the 10 cm³ of 8% solution to obtain the desired 80% solution.

The left-hand side of the equation represents the amount of alcohol in the original solution (which is 8% alcohol), while the right-hand side represents the amount of alcohol in the final solution (which is 80% alcohol).

Now we can solve for x:

0.08 x (10 + x) = 0.08x(10+x)

0.2x = 7.2

x = 36 cm³.

Therefore, the pharmacist must add  of pure alcohol to the  of 8% alcohol solution to obtain an 80% alcohol solution.

Learn more about Pure alcohol:

https://brainly.com/question/26347330

#SPJ4

Answer:

Step-by-step explanation:

The coordinates of point B are (4.25, 7.5), which is closest to option D (4.25, 8.25).

To find the coordinates of point B, we need to use the concept of section formula which states that if a line segment with endpoints A(x1, y1) and C(x3, y3) is partitioned by a point B(x2, y2) such that AB:BC = m:n, then the coordinates of B are given by:

x2 = (mx3 + nx1)/(m + n)
y2 = (my3 + ny1)/(m + n)

Here, A has coordinates (2, 6) and C has coordinates (5, 9). Let the ratio AB:BC be 3:1, which means that m = 3 and n = 1. Substituting these values in the formula, we get:

x2 = (3*5 + 1*2)/(3 + 1) = 17/4 = 4.25
y2 = (3*9 + 1*6)/(3 + 1) = 30/4 = 7.5

Therefore, the coordinates of point B are (4.25, 7.5), which is closest to option D (4.25, 8.25).

To learn more about coordinates, refer below:

https://brainly.com/question/16634867

#SPJ11

Two sides of a plot measure 32 m and 24 m and the angle between them is a perfect right angle. The other two sides measure 25 m each and the other three angles are not right angles. The area of the plot is 384 sq meters.

The Pythagorean theorem is a fundamental geometric idea that deals with the connections between the sides of right triangles. The square of the length of the hypotenuse (c) of a right triangle is equal to the sum of the squares of the lengths of the other two sides, according to the theorem (a and b). This may be stated mathematically as follows:

c² = a² + b²

Pythagoras, the ancient Greek mathematician who is credited with inventing the theorem, is named for him. It is employed in domains like physics, astronomy, and surveying and has extensive applications in mathematics, science, and engineering.

To learn about Pythagoras' theorem :

https://brainly.com/question/343682

Answer:

Step-by-step explanation:

The plot is in the shape of a trapezium with two sides measuring 32 m and 24 m, and two other sides measuring 25 m each.

To find the area of the plot, we need to first find the height of the trapezium. We can use the Pythagorean theorem to do this.

The side opposite to the right angle is the hypotenuse of the right-angled triangle formed by the two sides measuring 25 m each. So,

h² = 25² - 24²

h² = 625 - 576

h² = 49

h = 7

Therefore, the height of the trapezium is 7 m.

The area of a trapezium is given by the formula:

Area = (sum of parallel sides) x (height) / 2

In this case, the sum of the parallel sides is:

32 + 24 = 56

So, the area of the plot is:

Area = 56 x 7 / 2

Area = 196 m²

Therefore, the area of the plot is 196 square meters.

We can start by using the formula for the volume of a cylinder, which is:

V = πr^2h

where V is the volume, r is the radius (half of the diameter), and h is the height.

In this problem, we are given the height and volume of the can, but we need to find the diameter (which is twice the radius). We can rearrange the formula above to solve for the radius:

r = √(V/πh)

Substituting the given values, we get:

r = √(144/π x 11.4) ≈ 1.5 cm

Finally, we can find the diameter by doubling the radius:

d = 2r ≈ 3 cm

Therefore, the can's diameter is approximately 3 centimeters.

Answer is: Probability of a student getting a lunch that does not include chips is 6/12 or 0.5.

1. To find the probability of a student getting a lunch that includes chips and apple juice, we need to first find the total number of possible lunch combinations. There are 3 options for sandwiches, 2 options for sides, and 2 options for drinks, so there are a total of 3 x 2 x 2 = 12 possible lunch combinations.

Out of those 12 combinations, there is only 1 combination that includes chips and apple juice: ham and cheese sandwich, chips, and apple juice.

Therefore, the probability of a student getting a lunch that includes chips and apple juice is 1/12 or approximately 0.083.

2. To find the probability of a student getting a lunch that does not include chips, we can count the number of possible lunch combinations that do not include chips and divide by the total number of lunch combinations.

There are 3 sandwich options and 2 drink options, so there are a total of 3 x 2 = 6 possible lunch combinations without chips.

Out of the total of 12 possible lunch combinations, 6 do not include chips, so the probability of a student getting a lunch that does not include chips is 6/12 or 0.5.

To know more about probability:

https://brainly.com/question/24756209

The approximate length of the crust when x = 1.2 is 17.28 centimeters. The correct option is D.

To find the total perimeter of Sydney's sandwich, we need to add up the lengths of all four sides. From the given dimensions, we can see that the top and bottom sides each have a length of 2x²8, and the right and left sides each have a length of 2x²9. Therefore, the total perimeter can be expressed as:

2(2x²8) + 2(2x²9)

Simplifying this expression gives:

4x²8 + 4x²9

And further simplifying by factoring out 4x² gives:

4x²(8 + 9)

Which equals:

4x²17

Now, to find the approximate length of the crust when x = 1.2, we simply plug in this value for x into the expression we just found:

4(1.2)²17

Simplifying this expression gives:

4(1.44)17

Which equals:

5.76 + 11.52 = 17.28

Therefore, the approximate length of the crust when x = 1.2 is 17.28 centimeters. The answer is option D, which is 4x²17; 22.76 centimeters.

To know more about approximate length, refer to the link below:

https://brainly.com/question/30431347#

#SPJ11

Reactions at points A, C, and F are as follows: RA = -RC, RAy = RCy, and RF = 10 kN.

To determine reactions at points A, C, and F for the assembly consisting of two 10mm diameter rods (A-B and C-D), a 20mm diameter rod (E-F), and a rigid bar (H), with point G located midway between points E and F, and a force of 10 kN applied:

First, calculate the cross-sectional areas of the rods:
A1 = π(10mm)² / 4 = 78.54 mm² (for rods A-B and C-D)
A2 = π(20mm)² / 4 = 314.16 mm² (for rod E-F)

Next, calculate the effective modulus of elasticity for each rod:
E1 = E2 = 101 GPa

Now, use equilibrium equations to determine reactions at points A, C, and F:
ΣFx = 0: RAx + RCx = 0
ΣFy = 0: RAy + RCy + RF = -10 kN
ΣMG = 0: (RAy)(L/2) - (RCy)(L/2) = 0

Solving the equilibrium equations, we get:
RAx = -RCx
RAy = RCy
RF = 10 kN

To know more about modulus of elasticity click on below link:

https://brainly.com/question/30756002#

#SPJ11

The quadratic function that models the number of cases of flu each year, where y is years since 2012 is y = -0.02x^2 + 0.5x + 10. The coefficient of x is 0.5.

Suppose the number of cases of flu each year initially increases rapidly, but then starts to level off and eventually decline. We can model this behavior with a quadratic function of the form:

y = ax^2 + bx + c

where y is the number of cases of flu, and x is the number of years since 2012. Estimate the coefficients a, b, and c.

Assume the number of cases of flu was initially very low in 2012, so the y-intercept c is small value, say 10.

Next, assume that the number of cases of flu initially increased rapidly, but then started to level off around 2018.

y = ax^2 + bx + 10

where a is negative and b is positive.

Suppose the coefficient of the linear term is small, since we expect the trend to level off rather than continue to increase at a constant rate.

So, a possible quadratic function that models the number of cases of flu each year is:

y = -0.02x^2 + 0.5x + 10

The coefficient of x in this function is 0.5, which represents the rate of change of the number of cases of flu each year after 2012.

Know more about quadratic here:

https://brainly.com/question/1214333

#SPJ11

Based on the data, we can infer that Kallie needs 6 teaspoons of water conditioner for the 12 fish tanks.

To calculate how many teaspoons of water conditioner we must take into account the information on the capacity of each tank:

In accordance with the above, we do the following logical procedure.

We multiply the capacity of each tank by the number of tanks.

So we need 60 gallons of water to fill the tanks, and we divide by 10 to find how many teaspoons we need to fill all 12 tanks.

Based on the above, we need 6 teaspoons to condition the water in the 12 tanks.

Learn more about teaspoons in: https://brainly.com/question/25928464

#SPJ1

Answer:they cannot conclude the mean price

Step-by-step explanation:

khan

At the α=0.01 significance level, there is not enough evidence to conclude that the mean price of gasoline in your state is more than $3 per gallon on that day.

Here you collected a random sample of 40 gas stations and calculated the sample mean (bar x) and the sample standard deviation (sₓ).

In this case, you found that the test statistic t was approximately 0.65, and the P-value was approximately 0.260. The P-value is the probability of observing a test statistic as extreme as the one you calculated, assuming that the null hypothesis is true.

A P-value of 0.260 means that if the null hypothesis were true, there is a 26% chance of observing a sample mean as extreme or more extreme than the one you calculated.

To make a decision about the hypothesis, you need to compare the P-value to the significance level (α), which represents the maximum probability of rejecting the null hypothesis when it is actually true. In this case, the significance level is set to α=0.01, which means that you want to be 99% confident in your decision.

If the P-value is less than the significance level, you reject the null hypothesis in favor of the alternative hypothesis.

If the P-value is greater than the significance level, you fail to reject the null hypothesis.

In this case, the P-value is greater than the significance level, which means that you fail to reject the null hypothesis.

To know more about standard deviation here

https://brainly.com/question/16555520

#SPJ4

Complete Question:

An economist studying fuel costs suspected that the mean price of gasoline in her state was more than $3 per gallon on a certain day. On that day, she sampled 40 gas stations to test H0:μ=$3

Ha​:μ>$3

where μ is the mean price of gasoline per gallon that day in her state.

The sample data had a mean of bar x=$3.04 and a standard deviation of sₓ=$0.39

These results produced a test statistic of t≈0.65 and a P-value of approximately 0.260

Assuming the conditions for inference were met, what is an appropriate conclusion at the α=0.01  significance level?

The value of x and y for the angles are 4 and 9 respectively.

An exponential equation is an expression that shows how numbers and variables using mathematical operators.

10x - 4 = 6(x + 2)     (opposite angles are equal to each other)

10x - 4 = 6x + 12

4x = 16

x = 4

Also:

18y - 18 = 16y

2y = 18

y = 9

The value of x and y are 4 and 9 respectively.

Find out more on equation at: https://brainly.com/question/22688504

#SPJ1

Step-by-step explanation:

Finding the square root of a number is simply jist dividing the given number by 2 till you get to the last number which should be 1 then you pair up the number of two's and multiply. For example you have 6 two's when you pair them in two's you get 3 two's left then you multiply the remaining two's which would then be 2×2×2 which is 6

Answer:

Step-by-step explanation:

so basically, a square root is just the number that is multipled together to equal that, so sq rt of 64 is 8. This is because 8x8= 64. If you were to take a weird number like sq rt of 112, it would be a little bit more difficult, however its pretty easy to do this through thinking of your multiplication charts. if you think about it 11x10 but thats 110, it would have to be a number around there. 11x11 is too high but 10x10 is too low. SO it would have to be a number around there. if you did 10.5x10.5 it would give 110.25. so if you try to do 10.6x10.6 it would equal 112.36. (The actual answer is 10.58300524425836)  So that is how you determine how close you can get. It is very tedious to do this process and very time consuming. However, i would just advise you try to use a calculator (??)

this may be helpful if the videos aren't working for you :))

The velocity of the truck after the collision would be 24 m/s east.

The law of conservation of momentum states that the momentum of a closed system remains constant if no external forces act on it. In this case, we can assume that the car and the truck form a closed system.

The momentum of an object is given by its mass multiplied by its velocity, p = mv. Initially, the momentum of the system is:

p_initial = m_car * v_car + m_truck * v_truck

where m_car and v_car are the mass and velocity of the car, and m_truck and v_truck are the mass and velocity of the truck.

After the collision, the car is stopped, so its velocity is 0. The momentum of the system after the collision is:

p_final = m_car * 0 + m_truck * v'_truck

where v'_truck is the velocity of the truck after the collision.

Since momentum is conserved, we can set p_initial equal to p_final:

m_car * v_car + m_truck * v_truck = m_truck * v'_truck

Solving for v'_truck, we get:

v'_truck = (m_car * v_car + m_truck * v_truck) / m_truck

Substituting the given values, we have:

v'_truck = (1200 kg * 40 m/s + 2000 kg * 0 m/s) / 2000 kg

v'_truck = 24 m/s east

Therefore, the velocity of the truck after the collision would be 24 m/s east.

To know more about  law of conservation of momentum  refer here:

https://brainly.com/question/24131537

#SPJ11

Answer:

D. lines A and D are perpendicular

The length of the shadow cast on level ground by a radio mast 90m high when the elevation of the sun is 40 degrees is approximately 85.3 meters.

To calculate the length of the shadow, we need to use trigonometry. We can imagine a right-angled triangle, where the height of the mast is the opposite side, the length of the shadow is the adjacent side, and the angle of elevation is 40 degrees.

Using the trigonometric function tangent (tan), we can find the length of the shadow, which is equal to the opposite side (90m) divided by the tangent of the angle of elevation (40 degrees). Therefore, the length of the shadow is approximately 85.3 meters.

For more questions like Triangle click the link below:

https://brainly.com/question/2773823

#SPJ11

Stella drove 150 miles this week to and from school in the van.

To determine how many miles Stella drove this week, we can use the given information about the van's gas mileage.

First, we know that the van can drive 60 miles using 10 gallons of gasoline. We can calculate the miles per gallon (mpg) by dividing the miles driven by the gallons of gasoline used:
[tex]Miles per gallon (mpg) = \frac{60 miles}{10 gallons}  = 6 mpg[/tex]

Now, we know that Stella used 25 gallons of gas driving to and from school this week in the van. To find out how many miles she drove, we can multiply the gallons of gas she used by the van's mpg:
Miles driven = 25 gallons x 6 mpg = 150 miles

So, Stella drove 150 miles this week to and from school in the van. We know this by calculating the van's gas mileage (6 mpg) and multiplying it by the gallons of gas Stella used (25 gallons).

To know more about "miles per gallon" refer here:

https://brainly.com/question/926748#

#SPJ11

The ratios are: surface area 9:121, volume 27:1331, width 3:11.

(a) The ratio of the surface area of the model to the surface area of the original can be found by using the scale factor to find the ratio of the corresponding side lengths. Since surface area is proportional to the square of the side length, we can use this ratio squared to find the ratio of the surface areas.
The ratio of the corresponding side lengths is 3:11, so the ratio of the surface areas is (3/11)^2, which simplifies to 9/121.
Therefore, the ratio of the surface area of the model to the surface area of the original is 9:121.
(b) The ratio of the volume of the model to the volume of the original can be found using the same method as above, but with volume instead of surface area. Since volume is proportional to the cube of the side length, we can use this ratio cubed to find the ratio of the volumes.
The ratio of the corresponding side lengths is 3:11, so the ratio of the volumes is (3/11)^3, which simplifies to 27/1331.
Therefore, the ratio of the volume of the model to the volume of the original is 27:1331.
(c) The ratio of the width of the model to the width of the original can be found directly from the scale factor, since width is one of the corresponding side lengths.
The ratio of the corresponding side lengths is 3:11, so the ratio of the widths is 3:11.
Therefore, the ratio of the width of the model to the width of the original is 3:11.
Overall, the ratios are: surface area  9:121, volume  27:1331, width 3:11.

Learn more about surface area here, https://brainly.com/question/76387

#SPJ11

Answer:

For 10 sections you would need 60 rails

The rule for posts is to multiply the section by 3

the rule for rails is to multiply the post by 2

Answer:

A regular n-gon with one interior angle of 150° has 12 sides.

Step-by-step explanation:

The formula for the measure of each interior angle of a regular n-gon is:

where:

We are given that one interior angle measures 150°, so we can set up the equation:

Multiplying both sides by n, we get:

Distributing, we get:

Subtracting 150n from both sides, we get:

Adding 360 to both sides, we get:

Dividing both sides by 30, we get:

Therefore, a regular n-gon with one interior angle of 150° has 12 sides.

a) Approximately 79.38% of the phones have a battery life of at least 4 hours and 45 minutes.

b) Approximately 34.13% of the phones have a battery life between 4.5 hours and 5.25 hours.

c) Approximately 50% of the phones have a battery life less than 5 hours or greater than 5.5 hours.

a) What percentage battery life of 4 hours and 45 minutes?

a) For phones with a mean battery life of 5 hours and a standard deviation of 15 minutes, we can calculate the percentage of phones with a battery life of at least 4 hours and 45 minutes. By converting 4 hours and 45 minutes to minutes (4*60 + 45 = 285 minutes) and using the z-score formula, we find that the z-score is (285 - 300) / 15 = -1. Hence, the percentage is approximately 1 - 0.8359 = 0.1641, which is about 16.41%.

b) What percentage battery life between 4.5 hours and 5.25 hours?

b) To determine the percentage of phones with a battery life between 4.5 hours and 5.25 hours, we need to calculate the z-scores for both values. Converting the hours to minutes, we have 4.5 hours = 270 minutes and 5.25 hours = 315 minutes. The z-scores are (270 - 300) / 15 = -2 and (315 - 300) / 15 = 1. By referring to the standard normal distribution table, we find that the area between -2 and 1 is approximately 0.6141. Thus, the percentage is 0.6141 * 100 = 61.41%.

c) For the percentage of phones with a battery life less than 5 hours or greater than 5.5 hours, we need to calculate the z-score for both cases. The z-score for 5 hours is (300 - 300) / 15 = 0, and the z-score for 5.5 hours is (330 - 300) / 15 = 2. By referring to the standard normal distribution table, we find that the area to the left of 0 is 0.5 and the area to the right of 2 is 1 - 0.9772 = 0.0228. Adding these percentages, we get 0.5 + 0.0228 = 0.5228, which is approximately 52.28%.

Learn more about  battery life

brainly.com/question/10355447

#SPJ11

La probabilidad de que no haya demoras en un viaje de ida y vuelta es 0.64 (64%).

La probabilidad de que no haya demoras en un viaje de ida y vuelta se puede calcular utilizando la probabilidad complementaria. Si la probabilidad de que un vuelo se retrase es 0.2 (20%), entonces la probabilidad de que no haya retrasos en un vuelo individual es 1 - 0.2 = 0.8 (80%).

Para un viaje de ida y vuelta, la probabilidad de que no haya retrasos en ambos vuelos se calcula multiplicando las probabilidades de no retraso de cada vuelo.

Entonces, la probabilidad de que no haya demoras en un viaje de ida y vuelta sería 0.8 * 0.8 = 0.64 (64%), o 64 de cada 100 viajes de ida y vuelta no experimentarían retrasos.

Learn more about calcular

brainly.com/question/14286676

#SPJ11

About $786 billion will be spent at restaurants in 2017 if the trend continues.

We can use the formula for compound interest:

A = P(1 + r)^n

where:

A is the final amount

P is the initial amount

r is the annual interest rate

n is the number of years

In this instance, we're looking to determine how much will be spent at restaurants in 2017, which is 12 years from now, in 2005. The initial amount was $410 billion in 2005, and the yearly interest rate is 6%. We thus have:

A = 410(1 + 0.06)^12

A ≈ 786.34

Therefore, about $786 billion will be spent at restaurants in 2017 if the trend continues.

Learn more about compound interest here : brainly.com/question/2455673

#SPJ1

1 x 10⁻⁹ expresses a very small number i.e. nanosecond using a negative power of 10. The correct answer is option b).

Computer calculation speeds are incredibly fast, and they are usually measured in very small units of time. One of these units is a nanosecond, which is equal to one billionth of a second, or 0.000000001 seconds. This unit is used to measure the time it takes for a computer to perform basic operations such as adding two numbers or accessing data from memory.

To express 0.000000001 in scientific notation using a negative power of 10, we need to determine the number of decimal places to the right of the decimal point until we reach the first non-zero digit. In this case, we count nine decimal places to the right of the decimal point before we reach the first non-zero digit, which is 1. This means that 0.000000001 can be written as 1 x 10⁻⁹.

In scientific notation, any number can be expressed as the product of a number between 1 and 10, and a power of 10. The power of 10 tells us how many places we need to move the decimal point to the left or right to express the number in standard form. In the case of 0.000000001, we need to move the decimal point nine places to the right to express the number in standard form.

By writing this number in scientific notation as 1 x 10⁻⁹, we can easily perform calculations with it and compare it to other values measured in nanoseconds. Hence option b) is the correct option.

Know more about nanosecond here:

https://brainly.com/question/31475975

#SPJ11

The perimeter of the bedroom is 116ft

A rectangle is a type of quadrilateral, whose opposite sides are equal and parallel.

The perimeter of a rectangle is expressed as;

P = 2(l+w)

where l is the length and w is the width of the rectangle.

length = √ 21-21)²+ 18-(-7)²

= √25²

l = 25 ft

width = √ 21-(-12)²+18-18)²

= √ 33²

= 33

Perimeter = 2(33+25)

= 2 × 58

= 116ft

therefore the perimeter of the bedroom is 116ft.

learn more about perimeter of rectangle from

https://brainly.com/question/24571594

#SPJ1

The approximate length of the base of the triangle is 5 units.

Given that, the area of a hexagon is about 65 square units. You decompose the figure into 6 triangles.

A regular hexagon can be decomposed into 6 equal triangles,

So, the area of each triangle is 65/6 = 10.8 square units

The height of one triangle is about 4.3 units.

We know that, the area of a triangle is 1/2 ×Base×Hieght

Now, 10.8=1/2 ×Base×4.3

21.6=Base×4.3

Base=21.6/4.3

Base=5.02

Therefore, the approximate length of the base of the triangle is 5 units.

Learn more about the area here:

https://brainly.com/question/27683633.

#SPJ1

The final values is (fog)(x) = f(g(x)) = f(0) = -8.

In the given problem, we are given two functions, f(x) and g(x). The function f(x) is a polynomial function, and g(x) is a constant function equal to 0. We are asked to find the composition of these two functions, that is, (fog)(x) and (gof)(x).

The composition of two functions f(x) and g(x) is denoted by (fog)(x) and is defined as follows:

(fog)(x) = f(g(x))

This means that we first evaluate g(x) and then use the output of g(x) as the input of f(x) to get the final output of (fog)(x).

In this case, since g(x) = 0, we have:

(fog)(x) = f(g(x)) = f(0)

To evaluate f(0), we substitute x = 0 in the expression for f(x):

[tex]f(x) = 2x^2 - 6x^2 + 4x - 8[/tex]

[tex]f(0) = 2(0)^2 - 6(0)^2 + 4(0) - 8[/tex]

f(0) = -8

Therefore, (fog)(x) = f(g(x)) = f(0) = -8.

Now, to find (gof)(x), we need to evaluate g(f(x)). Since f(x) is a polynomial function, we can find its value for any value of x. However, since g(x) is a constant function equal to 0, its output is always 0 for any input x. Therefore, g(f(x)) = 0 for all values of f(x).

This means that (gof)(x) = g(f(x)) = 0 for all x.

In summary, we found that (fog)(x) = -8 and (gof)(x) = 0.

To learn more about functions visit: https://brainly.com/question/12431044

#SPJ11

The average price of a gallon of milk in the following years, using the exponential growth function, are:

a) 2018 = $2.90

  2021 = $3.55

b) Based on the exponential growth function, the cost of milk is inflating at 7% per year.

c) Based on the percentage of inflation, the predicted price of a gallon of milk in 2025 is $4.66.

An exponential growth function is a mathematical equation that describes the relationship between two variables (dependent and independent).

Under the function, there is a constant ratio of growth with the number of years between the initial value and the desired value as the exponent.

The given function for the price of average gallon of milk from 2008 to 2021 is 3.55 = 2.90 (1 + x)³.

Average price of milk in 2018 = $2.90

Average price of milk in 2021 = $3.55

Change in the average price of milk = $0.65 ($3.55 - $2.90)

The percentage change from 2018 to 2021 = 22.41% ($0.65 ÷ $2.90 x 100)

The cost of milk is inflating annually at (1 + x)^3

x = 7%

Cost of milk in 2025 = y

Number of years from 2018 to 2025 = 7 years

y = 2.90 (1 + 0.07)⁷

y = 2.90 (1.07)⁷

y = $4.66

Learn more about exponential growth functions at https://brainly.com/question/13223520.

#SPJ1