Alpha and Beta-D-glucopyranose are Anomers of each other.
What are Anomers?The relationship between alpha and beta-D-glucopyranose is that they are anomers of each other. Both alpha and beta-D-glucopyranose are cyclic forms of D-glucose, and they differ in the configuration of the hydroxyl group (OH) at the anomeric carbon (C1). In alpha-D-glucopyranose, the hydroxyl group is positioned below the plane of the ring, while in beta-D-glucopyranose, the hydroxyl group is positioned above the plane of the ring. The two forms can interconvert through a process called mutarotation.
To know more about Anomers:
https://brainly.com/question/31609773
#SPJ11
reducing sugars contain a free aldehyde or ketone group that will -- solutions of mild oxidizing agents (Cu) in benedict's solution
Resulting in a color change of the solution, which can be used as a test for the presence of reducing sugars.
How we can find oxidizing agents (Cu) in benedict's solution?Reducing sugars contain a free aldehyde or ketone group that can undergo oxidation in the presence of mild oxidizing agents, such as copper ions in Benedict's solution.
Benedict's solution is a commonly used chemical test for the presence of reducing sugars, such as glucose and fructose, in a solution.
The test is based on the ability of the aldehyde or ketone group in a reducing sugar to donate electrons to an oxidizing agent, such as copper ions [tex](Cu2+)[/tex], which are reduced to copper(I) oxide [tex](Cu2O)[/tex] in the process.
When a solution containing a reducing sugar is mixed with Benedict's solution and heated, the solution changes color from blue to green, yellow, orange, or red, depending on the concentration of the reducing sugar present.
The color change occurs because the copper ions in Benedict's solution are reduced to copper(I) oxide, which is a red-brown precipitate.
The reaction between the reducing sugar and Benedict's solution is dependent on the presence of a free aldehyde or ketone group in the sugar molecule.
Non-reducing sugars, such as sucrose and lactose, which do not have a free aldehyde or ketone group, do not react with Benedict's solution.
In summary, reducing sugars contain a free aldehyde or ketone group that can react with mild oxidizing agents, such as copper ions in Benedict's solution
Learn more about reducing sugars
brainly.com/question/30022610
#SPJ11
the following structure is best represented as a. furanose with an alpha hydroxy group. b. pyranose with an alpha hydroxy group. c. furanose with a beta hydroxy group. d. pyranose with a beta hydroxy group.
The best representation of the given structure is a furanose with an alpha hydroxy group.
Furanose is a type of carbohydrate ring structure and consists of four carbon atoms with one oxygen atom in the center. The alpha hydroxy group is a functional group that consists of a carbon atom with two hydroxyl groups on either side. The presence of this group in the furanose ring structure changes the properties of the molecule, such as its reactivity and solubility.
The orientation of the hydroxy group is also important, and in this case, it is positioned at the alpha position, which means it is directly attached to one of the four carbon atoms of the ring. This configuration makes the molecule more reactive, and it can undergo various chemical reactions more easily than if it had a beta hydroxy group.
Pyranose is another type of carbohydrate ring structure, but it is made up of six carbon atoms instead of four and the orientation of the hydroxy group is different, so it is not the best representation of the given structure.
Know more about Furanose here
https://brainly.com/question/30642167#
#SPJ11
which ion forms a tetrahydroxy complex with excess hydroxide ions (ph > 9) rather than a precipitate?
The ion that forms a tetrahydroxy complex with excess hydroxide ions (pH > 9) rather than a precipitate is aluminum ion (Al³⁺).
The formation of the tetrahydroxy complex, also known as the Al(OH)4- complex, occurs when excess hydroxide ions react with the Al3+ ion, causing the formation of a stable, soluble complex instead of a solid precipitate. This phenomenon is commonly observed in the treatment of wastewater, where aluminum salts are added to help remove phosphates and other contaminants from the water.
#SPJ11
Learn more on: https://brainly.com/question/2437279
methyl or 1Ë™ ether + HX (2 mol equivalent)
When methyl or 1˚ ether reacts with 2 equivalents of HX (hydrogen halide), the ether undergoes acid-catalyzed cleavage to form two products: an alkyl halide and an alcohol.
The reaction mechanism involves the protonation of the ether oxygen by HX, followed by nucleophilic attack by the halide ion on the carbon bearing the alkyl or aryl group. The overall reaction can be represented as follows:
R-O-R' + 2HX → R-X + R'-OH + HX
where R and R' represent alkyl or aryl groups.
For example, when methyl ether (CH3-O-CH3) reacts with two equivalents of HCl, it forms methyl chloride (CH3-Cl) and methanol (CH3-OH) according to the following reaction:
CH3-O-CH3 + 2HCl → CH3-Cl + CH3-OH + HCl
Similarly, when 1˚-butyl ether (C4H9-O-C4H9) reacts with two equivalents of HBr, it forms 1-bromobutane (C4H9-Br) and butanol (C4H9-OH) according to the following reaction:
C4H9-O-C4H9 + 2HBr → C4H9-Br + C4H9-OH + HBr
learn more about protonation here:
https://brainly.com/question/29680320
#SPJ11
How were clouds made?
Answer: Clouds form when the invisible water vapor in the air condenses into visible water droplets or ice crystals.
Explanation:
1.25 moles of zinc pellets are placed in a solution of copper two nitrate. assume copper 2 nitrate is in ecvess, how many moles of solid copper would be produced
1.25 moles of solid copper would be produced.
The balanced chemical equation for this reaction is:
Zn + Cu(NO3)2 -> Cu + Zn(NO3)2
From the equation, we can see that one mole of zinc reacts with one mole of copper (Cu). Therefore, if we have 1.25 moles of zinc, we can expect to produce 1.25 moles of copper. This is because the stoichiometric ratio between zinc and copper in the reaction is 1:1, meaning that for every mole of zinc reacted, one mole of copper is produced.
So the answer is 1.25 moles of solid copper would be produced.
To know more about solid copper click here:
https://brainly.com/question/28679893
#SPJ11
What is the conjugate base of H2PO4− ?A) HPO42-B) PO43- C) H3PO4D) H3O+ E) OH−
The conjugate base of H2PO4− is HPO42-. The answer is option A)
The conjugate base of an acid is the species formed after the acid donates a proton (H+). In other words, the conjugate base is the particle that remains after the acid has lost a proton.
In this case, H2PO4- is acid and it can donate one proton to form its conjugate base. When H2PO4- loses one proton, it becomes HPO42- which is its conjugate base.
Therefore, HPO42- is the answer.
To know more about conjugate base click here:
https://brainly.com/question/30225100
#SPJ11
what is the role of ca 2 ion during macrocapsule formation? how are the properties changed after addition of ca 2?
The role of [tex]Ca^{2+}[/tex] ions during macrocapsule formation is to facilitate the cross-linking of polyanionic molecules, such as polysaccharides, within the macrocapsule structure.
[tex]Ca^{2+}[/tex]ions form strong electrostatic interactions with the negatively charged groups present in the polymer chains, thereby promoting intermolecular binding and stability. This leads to the formation of a rigid and stable macrocapsule structure. This cross-linking process strengthens the macrocapsule and provides stability. After the addition of [tex]Ca^{2+}[/tex]the properties of the macrocapsule change, resulting in increased rigidity, improved mechanical strength, and enhanced stability against external factors. After the addition of [tex]Ca^{2+}[/tex] the properties of the macrocapsule are significantly changed. The macrocapsule becomes more rigid and stable, with improved mechanical strength and resistance to degradation. The [tex]Ca^{2+}[/tex] ions also improve the permeability of the macrocapsule membrane, making it more selective towards the transport of certain molecules. Overall, the addition of [tex]Ca^{2+}[/tex] plays a crucial role in enhancing the properties of macrocapsules for various applications in drug delivery and tissue engineering.
Learn more about macrocapsule here: https://brainly.com/question/31449740
#SPJ11
What practice bomb is used to simulate the B61?
The practice bomb is used to simulate the B61 is the thermonuclear gravity bomb.
The B61 nuclear bomb is the bomb that is primary the thermonuclear gravity bomb in the United States that is enduring the stockpile the end of the Cold War. The B61 nuclear bomb is the low to the intermediate-yield strategic or the tactical nuclear weapon that is featuring the two-stage radiation that implosion in the design.
The B61 nuclear bomb is detonate the beneath of the Earth's surface, that will increasing the destructiveness in against the underground targets and to the equivalent of the surface that burst the weapon and yield of the 1,250 kilotons.
To learn more about bomb here
https://brainly.com/question/30288409
#SPJ4
Draw a diagram for CuCl2 to show how to make the solution. Information to include…
- Mass solute = 33.6
- Moles of solute = 0.249907
- Molarity = 0.08330233
Make sure to have 3 ACCURATE steps drawn. Your drawing should only be 1 picture but include 3 steps.
Answer: Cant draw a diagram right now but I'll show what it should look like
Plugging in the values, we get:
Volume of solvent = 33.6 g / (0.08330233 mol/L x 134.45 g/mol)
Volume of solvent = 249.907 mL
Therefore, you would need 249.907 mL of water to dissolve 33.6 g of CuCl2.
What are the 2 important functions of neutralization?
The two important functions of neutralization are to create a neutral solution and to produce a salt and water.
Neutralization is a chemical reaction between an acid and a base that results in the formation of a neutral solution. This reaction involves the transfer of protons from the acid to the base, which leads to the formation of water and a salt. The salt produced depends on the acid and base used in the reaction.
The first important function of neutralization is to create a neutral solution. When an acid and a base react, they neutralize each other's acidic and basic properties, resulting in a solution that is neither acidic nor basic, but instead is neutral. This is important in many applications, such as in the production of pharmaceuticals or in the treatment of acid rain.
The second important function of neutralization is to produce a salt and water. The salt produced depends on the acid and base used in the reaction.
For example, if hydrochloric acid (HCl) reacts with sodium hydroxide (NaOH), sodium chloride (NaCl) and water (H2O) are produced. The salt produced can have a variety of uses, such as in the production of fertilizer or in food preservation.
To know more about neutralization, refer here:
https://brainly.com/question/28970253#
#SPJ11
asymmetrical alkyne + Hâ‚‚ (2 mol equivalent) + Pd/C
The reaction of an asymmetrical alkyne with hydrogen gas (H2) in the presence of a palladium catalyst (Pd/C) typically results in the reduction of the alkyne to an alkene.
The reaction mechanism involves the formation of a π-complex between the alkyne and Pd/C, followed by syn-addition of two hydrogen atoms across the triple bond to give a cis-alkene intermediate.
This intermediate can undergo isomerization to form a trans-alkene, or it can undergo further hydrogenation to give a saturated alkane.
If the alkyne is asymmetrical, meaning that the two substituents on the triple bond are different, then the product will be a mixture of cis- and trans-alkenes.
The ratio of these two isomers will depend on the steric and electronic effects of the substituents and the reaction conditions.
Overall, the reaction of an asymmetrical alkyne with H2 and Pd/C is a useful method for the selective reduction of alkynes to alkenes, which are versatile building blocks in organic synthesis.
learn more about isomers here:
https://brainly.com/question/12796779?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
how many grams of aluminum metal will be deposited from a solution that contains al3 ions if a current of 1.10 a is applied for 50.0 minutes.
165g is the mass of aluminum metal will be deposited from a solution that contains Al³⁺ ions if a current of 1.10 a is applied for 50.0 minutes.
A body's mass is an inherent quality. Prior to the discoveries of the atom and the theory of particles, it was widely considered to be tied to the amount of substance in a physical body.
It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses. There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent.
m= z×Q
Q = I×t
= 1.10×50
m= 3×1.10×50
=165g
To learn more about mass, here:
brainly.com/question/19694949
#SPJ4
What installed on a CBU-87 to convert it to a CBU-103?
To convert a CBU-87 to a CBU-103, a Wind Corrected Munitions Dispenser (WCMD) tail kit is installed on the bomb. The WCMD is a guidance system designed to improve the accuracy of cluster bombs by compensating for wind and other environmental factors.
The CBU-87 is a cluster bomb unit, which is an unguided air-dropped weapon that releases multiple submunitions over a target area.
The WCMD tail kit consists of an Inertial Navigation System (INS), Global Positioning System (GPS), and control fins. The INS uses accelerometers and gyroscopes to track the bomb's position, while the GPS ensures precise location information. The control fins allow the bomb to adjust its course during free-fall, counteracting wind effects and delivering the submunitions more accurately to the target area.
This conversion from CBU-87 to CBU-103 enhances the effectiveness of the weapon by reducing collateral damage and ensuring greater precision in targeting. The addition of the WCMD tail kit improves the accuracy and reliability of the cluster bomb, making it a more valuable asset in military operations.
In summary, installing a WCMD tail kit on a CBU-87 converts it to a CBU-103, resulting in a more accurate and effective cluster bomb unit. The tail kit includes an INS, GPS, and control fins that work together to compensate for wind and other environmental factors, ensuring precise delivery of submunitions to the target area.
For more such questions on Munitions.
https://brainly.com/question/28906374#
#SPJ11
46) What is the excess reactant for the following reaction given we have 2.6 moles of HCl and 1.4 moles of Ca(OH)2?
Reaction: 2HCl + Ca(OH)2 → 2H2O + CaCl2
A) Ca(OH)2
B) HCl
C) H2O
D) CaCl2
E) not enough information
Since we have 1.4 moles of Ca(OH)2, which is greater than the calculated amount needed, Ca(OH)2 is in excess and the answer is A) Ca(OH)2.
How to determine the excess reagent?To determine the excess reactant for the given reaction, we will use the balanced chemical equation and the provided moles of reactants. The balanced equation is:
2HCl + Ca(OH)2 → 2H2O + CaCl2
We have 2.6 moles of HCl and 1.4 moles of Ca(OH)2. To find the limiting reactant, we'll compare the mole ratios of the reactants:
Mole ratio of HCl to Ca(OH)2 = 2:1
Now, divide the given moles by the coefficients in the balanced equation:
HCl: 2.6 moles / 2 = 1.3
Ca(OH)2: 1.4 moles / 1 = 1.4
Since 1.3 is smaller than 1.4, HCl is the limiting reactant. Therefore, Ca(OH)2 is the excess reactant.
To know more about Limiting Reagent:
https://brainly.com/question/11848702
#SPJ11
asymmetrical alkene + X₂ + H₂O →
The reaction you're describing is a halogenation reaction where an unsymmetrical alkene reacts with a halogen (X2) and water (H2O) to form a halohydrin. The general reaction can be represented as follows:
Asymmetrical alkene + X2 + H2O → Halohydrin
For example, let's consider the reaction between propene (an asymmetrical alkene) and chlorine gas (Cl2) in the presence of water (H2O):
CH3CH=CH2 + Cl2 + H2O → CH3CH(Cl)CH2OH
In this reaction, the double bond of propene is broken and a chlorine atom is added to one carbon atom, while a hydroxyl group (-OH) is added to the other carbon atom.
This forms a halohydrin, which in this case is 2-chloropropanol. The reaction mechanism involves the formation of a cyclic intermediate called a halonium ion, which is then attacked by water to form the halohydrin.
Note that the halogenation of an unsymmetrical alkene can lead to the formation of different products, depending on the regioselectivity of the reaction. In the example above, the reaction is regioselective because the chlorine atom is added to the less-substituted carbon atom of the alkene.
learn more about halogenation here:
https://brainly.com/question/31033378?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
an acid and a base will neutralize each other to form a salt and water. in these neutralization reactions, the acid and base are called
In chemistry, when an acid and a base react with each other, they neutralize to form a salt and water. This neutralization reaction occurs when the hydrogen ions (H+) in the acid react with the hydroxide ions (OH-) in the base.
During the reaction, the hydrogen and hydroxide ions combine to form water, while the remaining ions combine to form a salt. The acid and base are referred to as reactants in this reaction, as they are the starting materials that react with each other to produce the salt and water.
The products of the reaction are the salt and water that are formed. This neutralization reaction is an example of an ionic reaction, as it involves the transfer of electrons between the two reactants. The reaction is also exothermic, meaning that it releases energy in the form of heat.
Know more about neutralization reaction here
https://brainly.com/question/28970253#
#SPJ11
Use rule 2 to explain H2O position in spectrochem series
The H₂O position in the spectrochemical series is explain by the molecular orbital energy diagram.
In the molecular orbital diagram in the water are very close to the energy level of the oxygen 2p energy level and the electronegativity of the oxygen is the main reason for the typical transition metal are the more electropositive than the hydrogen.
In the terms of the energy level the lowest energy of MO of the H₂O is not likely to have the significant overloop with the metal. The spectrochemical series is the list of the ligands that are ordered by the ligand strength.
To learn more about spectrochemical series here
https://brainly.com/question/28196968
#SPJ4
45) What is the chemical formula for magnesium hydroxide?A) MgH2B) MgOHC) MgOH2D) Mg(OH)2
The chemical formula for magnesium hydroxide is (D) Mg(OH)₂.
One magnesium ion (Mg2+) and two hydroxide ions (OH-), each of which has a -1 charge, combine to form the inorganic compound known as magnesium hydroxide. One magnesium ion and two hydroxide ions are present in the molecule, which is represented by the chemical formula Mg(OH)₂.
Magnesium hydroxide is a solid substance that is white, odorless, and insoluble in water. It can be made by combining sodium hydroxide or potassium hydroxide with a soluble magnesium salt, such as magnesium chloride or magnesium sulfate.
In summary, the chemical formula for magnesium hydroxide is Mg(OH)₂, indicating the presence of one magnesium ion and two hydroxide ions in the compound.
To know more about the magnesium hydroxide refer here :
https://brainly.com/question/21904397#
#SPJ11
To get salt out of a solution (separating salt from water) we could try
Select one:
a. evaporating the water so the salt is left behind
b. drinking the water
c. melting it
d. using the solute to redissolve it
e. using a magnet
To get salt out of a solution (separating salt from water), you could try:
a. evaporating the water so the salt is left behind
This is the correct method because as the water evaporates, the salt, which does not evaporate, will be left behind as solid crystals. The other options (b, c, d, and e) are not effective methods for separating salt from water.
In order to turn seawater into freshwater you have to remove the dissolved salt in seawater. That may seem as easy as just boiling some seawater in a pan, capturing the steam and condensing it back into water (distillation).
To know more about salt out of a solution :
https://brainly.com/question/28693614
#SPJ11
Which component of the electron transport chain is defective in cells from an SDH-linked paraganglioma tumor?A.Complex IB.Complex IIC.Complex IIID.Complex IVResearchers identified a mutation (L79R) in the human succinate dehydrogenase (SDH) gene that results in loss of function of SDH
Complex II, also known as succinate dehydrogenase, is the part of the electron transport chain (ETC) that is damaged in cells from an SDH-linked paraganglioma tumor.
SDH, an enzyme involved in the electron transport chain at Complex II, is rendered inactive as a result of the SDH gene mutation (L79R). Because of the inefficient transport of electrons from succinate to ubiquinone, succinate builds up and the regular cellular signaling pathways are interfered with. Tumors like paragangliomas and pheochromocytomas can grow in certain organs as a result of this disturbance.
As it catalyzes the conversion of succinate to fumarate and transfers electrons to ubiquinone (coenzyme Q), succinate dehydrogenase is a crucial enzyme in Complex II of the ETC. This electron transport is necessary to create a proton gradient across the mitochondrial inner membrane, which powers Complex V's (ATP synthase) ability to synthesize ATP.
To know more about ETC, refer:
https://brainly.com/question/17111336
#SPJ4
at stp, what is the volume of 4.50 moles of nitrogen gas? at stp, what is the volume of 4.50 moles of nitrogen gas? 101 l 3420 l 1230 l 167 l 60.7 l
The volume of 4.50 moles of nitrogen gas at STP is 100.8 L. The closest answer among the options given is 101 L.
How to determine the volume of a gas at STP?To find the volume of 4.50 moles of nitrogen gas at STP (Standard Temperature and Pressure), you can use the Ideal Gas Law and the molar volume of an ideal gas at STP.
At STP, the molar volume of an ideal gas is 22.4 L/mol.
Step 1: Determine the number of moles (n) given, which is 4.50 moles of nitrogen gas.
Step 2: Multiply the number of moles (n) by the molar volume of an ideal gas at STP:
Volume (V) = n × molar volume at STP
Volume (V) = 4.50 moles × 22.4 L/mol
Step 3: Calculate the volume:
Volume (V) = 100.8 L
To know more about Volume:
https://brainly.com/question/31011323
#SPJ11
What are two types of secondary structures that occur frequently in proteins?
The two types of secondary structures that occur frequently in proteins are alpha helices and beta sheets.
Alpha helices are tightly coiled structures, where the polypeptide backbone forms a spiral shape. Beta sheets, on the other hand, are made up of extended strands of polypeptide chains that are folded back and forth to create a flat, sheet-like structure. Both of these secondary structures play important roles in determining a protein's overall shape and function.
To know more about structures refer here:
https://brainly.com/question/30560943#
#SPJ11
How many moles of Neon gas are there if 25.0 Liters of the gas are at 278K and pressure of 89.9 KPa (R= 8.314)
a
6.50 mol
b
0.97 mol
c
5.60 mol
d
0.85 mol
Why are glycine and proline less commonly found in α helices than other amino acids?
Answer:
All the amino acids are found in α-helices, but glycine and proline are uncommon, as they destabilize the α-helix.
https://brainly.com/question/31589451?answeringSource=feedPublic%2FhomePage%2F4
29) Calculate the mass percent composition of sulfur in Al2(SO4)3.A) 28.12%B) 9.372%C) 42.73%D) 21.38%E) 35.97%
The mass percent composition of sulfur in Al2(SO4)3 is approximately 28.12% (Option A).
To calculate the mass percent composition of sulfur in Al2(SO4)3, follow these steps:
1. Determine the molar mass of the compound Al2(SO4)3:
- 2 moles of Al (26.98 g/mol) = 2 * 26.98 = 53.96 g/mol
- 3 moles of SO4 (1 S: 32.07 g/mol, 4 O: 4 * 16.00 g/mol = 64.00 g/mol) = 3 * (32.07 + 64.00) = 3 * 96.07 = 288.21 g/mol
Total molar mass of Al2(SO4)3 = 53.96 + 288.21 = 342.17 g/mol
2. Calculate the mass percent composition of sulfur (S):
Mass percent of S = (total mass of S in the compound / total molar mass of the compound) * 100
Mass percent of S = (3 * 32.07 g/mol) / 342.17 g/mol * 100 ≈ 28.12%
Therefore, the mass percent composition of sulfur in Al2(SO4)3 is approximately 28.12% (Option A).
To learn more about molar mass, refer below:
https://brainly.com/question/22997914
#SPJ11
Part A Indicate whether ΔG increases, decreases, or does not change when the partial pressure of H2 is increased in each of the following reactions. Drag the appropriate items to their respective bins
The value for Gibbs free energy will a) decrease b) increase and c) decrease.
The Gibbs free energy equation is dependent on pressure. When a system changes from an initial state to a final state, the Gibbs free energy (ΔG) equals the work exchanged by the system with its surroundings, minus the work of the pressure force. The Gibbs free energy is expressed as. where P is pressure, T is the temperature, U is the internal energy, V is volume, H is the enthalpy, and S is the entropy. The value for Gibbs free energy will a) decrease b) increase and c) decrease.
To learn more about Gibbs free energy check the link below-
brainly.com/question/9179942
#SPJ4
Complete question-
Indicate whether ?G increases, decreases, or does not change when the partial pressure of H2 is increased in each of the following reactions:
a. N2(g)+3H2(g)=>2NH3(g)
b. 2HBr(g)=> H2(g)+Br2(g)
c. 2H2(g)+C2H2(g)=> C2H6(g)
Give two differences between the physical properties of the elements in Group 1 and those of the transition elements. [2 marks
Due to their stronger metallic bonding and more compact atomic structure, the transition elements have higher melting and boiling temperatures and are often denser than the alkali metals.
What are group one metals' two physical characteristics?Elements from Group 1 have similar properties. All of them are supple silver metals. These metals are extremely reactive and have low melting temperatures due to their low ionisation energy. As you descend the chart, this family becomes more reactive.
What are the transitional elements?The d orbitals of transitional elements are only partially filled. A transition element is defined by IUPAC as an element that may form stable cations and has an electron d subshell that is only partly filled.
To know more about transition elements visit:-
https://brainly.com/question/1948991
#SPJ1
a mixture of gases consists of 26 percent hydrogen, 36 percent helium, and 38 percent nitrogen by volume. calculate the mass fractions of the individual components of the mixture and apparent molecular weight of this mixture. use the table containing the molar mass, gas constant, and critical-point properties.
The mass fractions of the individual elements of the mixture are 26 g, 18 g and 5.42 g respectively and apparent molecular weight of this mixture is 49.42 g.
It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. They have a mass of one atom.Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
Mass fraction of hydrogen=26/1=26,mass fraction of helium= 36/2=18 , mass fraction of nitrogen=38/7=5.42 and apparent molecular weight of this mixture is 26+18+5.42=49.42 grams.
Learn more about element,here:
https://brainly.com/question/14347616
#SPJ4
why does a hydrophobic residue on the exterior of a protein require decreased entropy?
A hydrophobic residue on the exterior of a protein require decreased entropy so as to enable diffusion.
Diffusion is defined as the process of movement of molecules such as proteins which takes place under concentration gradient. It helps in movement of substances in and out from the cell.The molecules move from lower concentration region to a higher concentration region till the concentration becomes equal.
There are 2 main types of diffusion:
1) simple diffusion-process in which substances move through a semi-permeable membrane without the aid of transport proteins.
2) facilitated diffusion- It is a passive movement of molecules across cell membrane from higher concentration region to lower concentration.
Learn more about diffusion,here:
https://brainly.com/question/24746577
#SPJ4
