Answers
This question is incomplete, the complete question is;
The enthalpy change for the reaction between two molecules of carbon oxysulfide (COS) to form one molecule of CO₂ and one molecule of CS₂, as shown below, is -3.2 x 10⁻²⁴ kJ per molecule of COS.
The bond energy for the C-S bond in C=S has been determined to be 552 kJ/mol.
What is the apparent bond energy of a carbon-sulfur bond in COS?
NOTE: A C=O bond adjacent to another double bond is not the same as a C=O bond that is not adjacent to another double bond.
Answer:
The apparent bond energy of a carbon–sulfur bond is 550.1 kJ/mole
Explanation:
Given the data in the question and the figure 8.122 in the image below;
the given reaction can be written as follows;
2COS -----→ CO₂ + CS₂
Δ[tex]H_{rxn}[/tex] = ∑ Bond Energy ( reactants) - ∑ Bond Energy (products)
= [ (2 × C=O) + (2 × C=S) ] - [ (2 × C=O) + ( 2 × C=S) ]
we know that;
Δ[tex]H_{rxn}[/tex] = -3.2 x 10⁻²⁴ kJ per molecule
= -3.2 x 10⁻²⁴ kJ × 2 × 6.023 × 10²³ kJ/mole
= -3.85 kJ/mole
Hence;
-3.85 kJ/mole = (2 × C=S)[tex]_{reactant}[/tex] - ( 2 × C=S)[tex]_{product}[/tex]
-3.85 kJ/mole = (2 × C=S)[tex]_{reactant}[/tex] - ( 2 × 552 kJ/mole)
(2 × C=S)[tex]_{reactant}[/tex] = -3.85 kJ/mole + 1104 kJ /mole
(2 × C=S)[tex]_{reactant}[/tex] = 1100.15 kJ/mole
2 × ( C=S)[tex]_{reactant}[/tex] = 1100.15 kJ/mole
( C=S)[tex]_{reactant}[/tex] = 1100.15 kJ/mole / 2
( C=S)[tex]_{reactant}[/tex] = 550.1 kJ/mole
Therefore, the apparent bond energy of a carbon–sulfur bond is 550.1 kJ/mole
The apparent bond energy of a carbon-sulfur bond in COS is equal to 550.08 kJ/mol.
Given the following data:
Enthalpy change of reaction = [tex]-3.2 \times 10^{-24}\;kJ/mol.[/tex]Bond energy of C=S = 552 kJ/mol.Scientific data:
Avogadro's number = [tex]6.02 \times 10^{23}[/tex]To determine the apparent bond energy of a carbon-sulfur bond in COS:
First of all, we would write a balanced chemical equation for the chemical reaction as follows:
[tex]2COS \rightarrow CO_2 + CS_2[/tex]
The enthalpy change of two (2) moles of COS is:
[tex]\Delta H_{rxn} = -3.2 \times 10^{-24}\times 2 \times 6.02 \times 10^{23}\\\\\Delta H_{rxn} =-3.85\;kJ/mol.[/tex]
Mathematically, the enthalpy change of a chemical reaction is given by this equation:
[tex]\Delta H_{rxn} = \sum Bond\;Energy_{(reactansts)} - \sum Bond\;Energy_{(products)}\\\\\Delta H_{rxn} = [(2\times C=O)+ (2\times C=S)]- [(2\times C=O)+ (2\times C=S)][/tex]
Substituting the parameters into the equation, we have;
[tex]-3.85 = (2\times C=S)- [2\times 552]\\\\(2\times C=S)=1104-3.85\\\\(2\times C=S)=1100.15\\\\(C=S)=\frac{1100.15}{2} \\\\(C=S)=550.08\;kJ/mol[/tex]
Therefore, the apparent bond energy of a carbon-sulfur bond in COS is equal to 550.08 kJ/mol.
Read more: https://brainly.com/question/13197037
Complete Question:
The enthalpy change for the reaction between two molecules of carbon oxysulfide (COS) to form one molecule of [tex]CO_2[/tex] and one molecule of [tex]CS_2[/tex], as shown below, is [tex]-3.2 \times 10^{-24}[/tex] kJ per molecule of COS. The bond energy for the C-S bond in C=S has been determined to be 552 kJ/mol. What is the apparent bond energy of a carbon-sulfur bond in COS?
[Note: A C=O bond adjacent to another double bond is not the same as a C=O bond that is not adjacent to another double bond.]
Related Questions
Steam is collected and observed to condense into liquid water. Which of the following would you expect to observe if a thermometer recorded the temperature of the substance?
SELECT AN ANSWER
The temperature would decrease.
The temperature would remain the same.
It would depend on the amount of steam.
The temperature would increase.
Answers
the water will be increased
Write the word equation for
the reaction between sodium
hydrogen carbonate and
sulfuric acid.
Answers
Answer:
NaHCo3+Na2So4---Nna2So4+H2O+CO2
Answer:
sodium two sulphate+Carbondioxed gas +water
Kinematics equations are used only by physicists and people who work in
space.
A. True
B. False
Answers
Answer:
FALSE
Explanation:
false. kinematics equations are used for many purposes.it is used to drive equations and to find the motion of an object. but it is used more in physics rather than maths.
What is the functional groups of CH3CH2CH(OH)CH2C(CH3)2Br?
Answers
Answer:
What is the functional groups of CH3CH2CH(OH)CH2C(CH3)2Br?
Look at sample problem 19.10 in the 8th ed Silberberg book. Write the Ksp expression. Find the concentrations of the ions you need (in this case Ca2 and F-). Put those concentrations into the Ksp expression to calculate Q. Compare Q to K A common laboratory method for preparing a precipitate is to mix solutions containing the component ions. Does a precipitate form when 10. ml of 0.0010 M Ca(NO3)2 is mixed with 10. ml of 0.00010 M NaF
Answers
Answer:
Explanation:
From the information given:
[tex]CaF_2 \to Ca^{2+} + 2F^-[/tex]
[tex]Ksp = 3.2 \times 10^{-11}[/tex]
no of moles of [tex]Ca^{2+}[/tex] = 0.01 L × 0.0010 mol/L
no of moles of [tex]Ca^{2+}[/tex] = [tex]1 \times 10^{-5} \ mol[/tex]
no of moles of [tex]F^-[/tex] = 0.01 L × 0.00010 mol/L
no of moles of [tex]F^-[/tex] = [tex]1 \times 10^{-6}\ mol[/tex]
Total volume = 0.02 L
[tex][Ca^{2+}}] = \dfrac{1\times10^{-5} \ mol}{0.02 \ L} \\ \\ \\ \[[Ca^{2+}}] = 0.0005 \ mol/L[/tex]
[tex][F^{-}] = \dfrac{(1\times 10^{-6} \ mol)}{0.02 \ L}[/tex]
[tex][F^{-}] = 5 \times 10^{-5} \ mol/L[/tex]
[tex]Q = [Ca^{2+}][F^-]^2 \\ \\ Q = 0.0005 \times (5\times 10^{-5})^2 \\ \\ Q = 1.25 \times 10^{-12}[/tex]
Since Q<ksp, then there will no be any precipitation of CaF2
Which word best describes the relationship between polyps and algae
exoskeletal
Bleached
Photosynthetic
Symbiotic
Answers
Answer:
symbiotic
Explanation:
There like a close friendship
Which of the following are true about an atom? Choose all that apply.
Answers
Answer:
Explanation:
Atoms are the building blocks of matter.
They are the smallest particles of an element that still have the element's properties.
All atoms are very small, but atoms of different elements vary in size.
Three main types of particles that make up all atoms are protons, neutrons, and electrons.
Please answer ASAP! thanks
Answers
WILL MARK BRAINLIST
If a car travels 60 miles for two hours, what is the average speed?
15 mi/hr
30 mi/hr
45 mi/hr
60 mi/hr
Answers
Answer:
The average speed must be 30mph so this means the car traveled for 2hrs 60/30
What happens to algae when the temperature in the ocean becomes too hot?
O The algae are susceptible to infection.
O The algae become pale.
O The algae photosynthesize faster.
O The algae lose their ability to photosynthesize
Answers
Answer:
The algae lose their ability to photosynthesize.
Explanation:
Because the algae turn the energy from the sunlight into chemicals.
Hoped this helped!
The following table lists molecular weight data for a polypropylene material. Molecular Weight Range (g/mol) xi wi
8,000 - 16,000 0.07 0.03 16,000 - 24,000 0.15 0.09 24,000 - 32,000 0.26 0.21 32,000 - 40,000 0.27 0.27 40,000 - 48,000 0.18 0.28 48,000 - 56,000 0.07 0.12
Click here to access Table 14.3. Atomic weights for several elements are included in the following table: Carbon 12.01 g/mol Chlorine 35.45 g/mol Fluorine 19.00 g/mol Hydrogen 1.008 g/mol Oxygen 16.00 g/mol Nitrogen 14.01 g/mol Compute the following:
(a) the number-average molecular weight, Enter your answer for part (a) in accordance to the question statement g/mol
(b) the weight-average molecular weight, Enter your answer for part (b) in accordance to the question statement g/mol
(c) the degree of polymerization.
Answers
Answer:
a) the number-average molecular weight is 32,400 g/mol
b) the weight-average molecular weight is 36,320 g/mol
c) the degree of polymerization is 770
Explanation:
Given the data in the question;
Molecular Mean Number Weight Number Weight
weight average average
(g/mol) Mi(g/mol) xi wi xiMi wiMi
8,000-16,000 12,000 0.07 0.03 840 360
16,000-24,000 20,000 0.15 0.09 3000 1800
24,000-32,000 28,000 0.26 0.21 7280 5880
32,000-40,000 36,000 0.27 0.27 9720 9720
40,000-48,000 44,000 0.18 0.28 7920 12320
48,000-56,000 52,000 0.07 0.12 3640 6240
∑ Mn=32,400 Mw=36,320
so;
a) the number-average molecular weight
Mn = ∑Mixi
so from the table above; summation of Row Mixi
Mn = ∑Mixi = 32,400
Therefore, the number-average molecular weight is 32,400 g/mol
b) the weight-average molecular weight
Mw = ∑Miwi
so from the table above; summation of Row Miwi
Mw = ∑Miwi = 36,320
Therefore, the weight-average molecular weight is 36,320 g/mol
c) the degree of polymerization
the degree of polymerization of polypropylene can be determined using number-average molecular and repeat unit molecular weight.
now, for polypropylene { CH₂ = CH - CH₃ }
the repeat unit consist of 3 carbon atoms and 6 hydrogen atoms
given that;
Atomic weight of Carbon mC = 12.01 g/mol and
Atomic weight of Hydrogen mH = 1.008 g/mol
now we find the repeat unit molecular weight of polypropylene
m = nCmC + nHmH
where n is the number of repeat of atoms
so we substitute
m = ( 3 × 12.01) + ( 6 × 1.008)
m = 36.03 + 6.048
m = 42.078 g/mol
now we calculate the degree of polymerization;
DP = Mn / m
so we substitute
DP = 32,400 / 42.078
DP = 769.9985 ≈ 770
Therefore, the degree of polymerization is 770
What are bacteria? Are they good or bad?
Answers
Answer:
Bacteria are a type of biological cell. They constitute a large domain of prokaryotic microorganisms
some are good some are bad
Explanation:
If 0.64 mol PCl5 is placed in a 1.0 L flask and allowed to reach equilibrium at a given temperature, what is the final concentration of Cl2 in the flask?
PCl5 (g)→ PCl3 (aq) + Cl2 (g) Kc= 0.47
Answers
Answer: The final concentration of [tex]Cl_2[/tex] at equilibrium is 0.36 M
Explanation:
Moles of [tex]PCl_5[/tex] = 0.64 mole
Volume of solution = 1.0 L
Initial concentration of [tex]PCl_5[/tex] = [tex]\frac{moles}{Volume}=\frac{0.64mol}{1.0L}=0.64 M[/tex]
The given balanced equilibrium reaction is,
[tex]PCl_5(g)\rightleftharpoons PCl_3(g)+Cl_2(g)[/tex]
Initial conc. 0.64 M 0M 0M
At eqm. conc. (0.64-x) M (x) M (x) M
The expression for equilibrium constant for this reaction will be,
[tex]K_c=\frac{[Cl_2]\times [PCl_3]}{[PCl_5]}[/tex]
Now put all the given values in this expression, we get
[tex]0.47=\frac{(x)\times (x)}{(0.64-x)}[/tex]
By solving the term 'x', we get :
x = 0.36
Thus, the final concentration of [tex]Cl_2[/tex] at equilibrium is x = 0.36 M
The concentration of Cl2 is 0.36M.
Number of moles of PCl5 = 0.64 mol
Volume = 1.0 L
Concentration of PCl5 = 0.64 mol/1.0 L = 0.64 M
The equation of the reaction is;
PCl5 (g)→ PCl3 (aq) + Cl2 (g)
I 0.64 0 0
C -x +x +x
E 0.64 - x x x
Kc = [PCl3] [Cl2]/[PCl5]
0.47 = x^2/0.64 - x
0.47(0.64 - x) = x^2
0.3 - 0.47x =x^2
x^2 + 0.47x - 0.3 = 0
x = 0.36 M
The concentration of Cl2 is 0.36M.
Learn more about concentration:https://brainly.com/question/1195122
I need help explaining what are the differences between Solids, Liquids, and Gases.
Answers
Explanation: solids are frozen like if you freeze tea it becomes a solid , liquids is like tea and gases is like when you boil water and it becomes a gas
Fred is about to order a stack of four pancakes with butter and syrup, but he wonders how much he would need to exercise to burn off the Calories from it. He pulls out his cell phone and finds the nutritional information for the stack of pancakes. He notes that a serving has 181g of carbohydrates, 27g of fat, and 16g of protein. Now, he has to convert these values into Calories.
Running at a pace of 8 minutes per mile burns 14 Calories/minute. How many minutes would he have to run at an 8 minutes per mile pace to bum off the Calories from the stack of pancakes?
Answers
Answer:
The correct answer is - 73.64 minutes.
Explanation:
We know that each gram of protein and carbohydrate produces 4 calories of energy whereas fat produces 9 cal energy per gram.
So, the Calories from carbohydrates
= 181 ×4
= 724 Cal
and, 27 g fat produces = 27 × 9 = 243 Cal
and, 16 g protien = 16 × 4 = 64 Cal
so the total energy will be - 243+ 724+ 64 = 1031 Cal
Thus, the time Fred need to run = 1031/14 =73.64 min
Name the compound AgF
Answers
Answer: Silver (I) fluoride molecule · AgF
Classification: Inorganic compound (Could be salt)
Ionic compound (Silver is a metal)
Valence of F (F must form an octet): 7
Valence of Ag: 11
Total valence electrons: 18
Molar mass: 126.87 g/mol
Explanation:
An aqueous solution of nitric acid is standardized by titration with a 0.174 M solution of barium hydroxide. If 13.9 mL of base are required to neutralize 28.7 mL of the acid, what is the molarity of the nitric acid solution?
Answers
Answer:
Explanation:
2HNO₃ + Ba( OH)₂ = Ba( NO₃ )₂ + 2H₂O .
2 mole 1 mole
13.9 mL of .174M barium hydroxide contains .0139 x .174 moles
= 2.42 x 10⁻³ moles .
1 mole of barium hydroxide reacts with 2 moles of nitric acid
2.42 x 10⁻³ moles of barium hydroxide will react with 2 x 2.42 x 10⁻³ moles of nitric acid
= 4.84 x 10⁻³ moles
4.84 x 10⁻³ moles of nitric acid is contained in 28.7 mL
molarity of nitric acid = 4.84 x 10⁻³ / 28.7 x 10⁻³
= .169 M .
How can we solve food insecurity while reducing food waste?
o inventory food supplies to avoid overbuying
O donate unused food to food banks
O purchase only as much food as you need
O don't throw scraps in the landfill
Answers
Answer:
donate unused food to food banks
Explanation:
Becuse food banks processes food to make very fine particles which is mixed with soil and can be given to the plants
This is the chemical formula for Chormium (III) nitrate Cr(NO3)3Calculate the mass percent of nitrogen in chromium(III) nitrate.
Answers
Answer:
The percent composition for nitrogen in chromium(III) nitrate is 6%.
Explanation:
The mass percent of nitrogen in chromium(III) nitrate is 17.655%.
Calculation,
Molar mass of one oxygen = 16 g
molar mass of nine oxygen = 9 × 16 g = 144 g
molar mass of one nitrogen atom = 14 g
molar mass of three nitrogen atom = 3 × 14 g = 42 g
molar mass of one chromium atom = 51.99 g
molar mass of chromium (III) nitrate molecule = 144 g + 42 g + 51.99 g = 237.99 g
Mass percent of nitrogen = mass of three nitrogen atom× 100 /mass of chromium(III)nitrate
Mass percent of nitrogen = 42 g/237.99 g × 100 = 17.655%
What is mass percentage?The percentage of the mass of the element or solute divided by the mass of the compound or solute is called mass percentage
learn about mass percentage,
https://brainly.com/question/16885872
#SPJ2
Which factors play a role in creating ocean waves?
Choose all answers that are correct.
wind duration
wind speed
wind change
wind elevation
wind direction
wind fetch
Answers
Answer:
1. Wind speed
2. Wind change
3. Wind elevation
4. Wind direction
Answer:
For k12 its::
Explanation:
wind direction
wind speed
wind fetch
wind duration
Yw guys! ^^
Explain how the Octet Rule would say that the elements of potassium and chlorine would react.
Answers
Answer:
The octet rule is only applicable to the main group elements. The molecules of the halogens, oxygen, nitrogen, and carbon are known to obey the octet rule. In general, the elements that obey this rule include the s-block elements and the p-block elements (except hydrogen, helium, and lithium).
Explanation:
I hope this helps and pls mark me brainliest :)
A car changes its velocity from 0 m/s to 14 m/s in 2 seconds.
What is the acceleration
Answers
Answer:
7
Explanation:
You divide the 14m/s by 2 and get the answer of the acceleration of 7
If the mercury in a manometer raises 30.0 millimeters due to a change in pressure, what is the corresponding change in pressure in atm?
Answers
Answer:
0.03947 atm
Explanation:
The relationship between mmHg and atm is given as;
1 atm = 760 mmHg
x atm = 30 mmHg
Upon solving for x;
x * 760 = 30 * 1
x = 30 / 760 = 0.03947 atm
Question 6 of 25
When nonionizing radiation is absorbed by matter, it usually becomes which
type of energy?
A. Thermal
B. Mechanical
C. Electromagnetic
O D. Chemical
Answers
Answer:
thermal
Explanation:
a p e x
Calculate the mass, in grams, of 912 atoms of iron, Fe (1 mol of Fe
has a mass of 55.85 g).
Answers
Answer:
8.45 × 10⁻²⁰ g
Explanation:
Step 1: Given data
Number of atoms of Fe (N): 912 atomsMolar mass of Fe (M): 55.85 g/molStep 2: Calculate the mass, in grams, of 1 atom of Fe
We will use Avogadro's number: there are 6.02 × 10²³ atoms of Fe in 1 mole of Fe.
55.85 g/mol × 1 mol/6.02 × 10²³ atom = 9.27 × 10⁻²³ g/atom
Step 3: Calculate the mass corresponding to 912 atoms
9.27 × 10⁻²³ g/atom × 912 atom = 8.45 × 10⁻²⁰ g
Explain why NO is more soluble in water than either N2 or O2. Fill in the following blanks.
a. Compared to nitrogen, the ____________of ethylene makes it more soluble in water.
b. The high solubility of sulfur dioxide can be explained by its ______________
c. Nitric oxide is more soluble than nitrogen and oxygen because of its ______________
d. Compared to oxygen, nitrogen's _____________ makes it more difficult for water molecules to surround the nitrogen molecules.
1. Polarity
2. Ability to react with water
3. Shorter bond length
4. Larger molecular size
Answers
Answer:
a. Larger molecular size
b. Ability to react with water
c. Polarity
d. Shorter bond length
Explanation:
Ethene is a larger molecule than oxygen and nitrogen hence it is more soluble than the both other gases .
SO2 dissolves readily in water to yield an acid solution. It is an acid anhydride.
Nitric oxide is a polar compound. It remains very much polar while nitrogen and oxygen are non polar.
Nitrogen is sp hybrized, this leads to a very short bond and does not easily interact with oxygen and nitrogen
Calculate the volume in mL of 0.100 of CaCl2 needed to produce 1.00 g of CaCO3. there is an excess of Na2CO3
Answers
Answer:
100. mL
Explanation:
The computation of the volume in mL is shown below:
The balance equation of the double displacement reaction is
[tex]CaCl_{2} + Na_{2}CO_{3} \rightarrow 2 NaCl + CaCO_{3}[/tex]
Now determine the moles that corresponding to 1.00 g of CaCO₃
As,
The molar mass of CaCO₃ is 100.09 g/mol.
So,
= 1.00 g × 1 mol/100.09 g
= 0.0100 mol
Now
the moles of CaCl₂ needed to generate 0.0100 moles of CaCO₃
As we know that
The molar ratio of CaCl₂ to CaCO₃ is 1:1.
So, The moles of CaCl₂ needed is
= 1 ÷ 1 × 0.0100 mol
= 0.0100 mol.
Now volume of 0.100 M CaCl₂ that contains 0.0100 mol is
= 0.0100 mol × 1 L/0.100 mol × 1000 mL/1 L
= 100. mL
50 POINTS
Which of the following correctly describes a compound?
A. The atoms are bonded together, and the compound has different physical and chemical properties than the individual elements.
B. The atoms have no set ratio for how the atoms can combine, and they are not chemically bonded together.
C. The atoms can only combine in fixed ratios, and they retain their individual chemical and physical properties.
D. The atoms retain their individual chemical properties, and they can only be separated from each other by a chemical change.
Answers
Answer: A chemical compound can be described as substance composed of atoms from more than one element held together by chemical bonds in a fixed stoichiometric proportion. A compound has different physical and chemical properties from its constituent elements.
For example : compound water is made up of H and O bonded together and it has different properties from O and H.
Thus, among the given options, the one coreectly describing a compound is
a) The atoms are bonded together, and the compound has different physical and chemical properties than the individual elements.
explain why the definition of philosophy as the love of wisdom in insufficient?
Answers
Answer:
The word “philosophy” literally means the “love” (philo in Greek) of “wisdom” (sophia). So, a philosopher is somebody who loves wisdom. This, of course, leaves us with 2 important questions: What is wisdom? And what does it mean to love wisdom?
The idea of philosophy goes all the way back to ancient Greece. It is said that the philosopher Pythagoras in the 6th century BCE was the 1st to call himself a philosopher—a philosophos, or “lover of wisdom.” In calling himself this, he was not claiming to be wise. Instead, he was merely saying that he was somebody who valued or cherished wisdom.
Later, the philosopher Plato, who lived in the 5th century BCE, explored these ideas in more depth. In a text called the Symposium, Plato claimed that a philosopher was somebody who was “between the wise and the ignorant.” In other words, a philosopher cared about wisdom but also knew that they were ignorant (we will see tomorrow how Plato was influenced in this by his teacher, Socrates).
Explanation:
Titanium(IV) chloride decomposes to form titanium and chlorine, like this:
TiCl4(l) → Ti(s)+ 2Cl2(g)
At a certain temperature, a chemist finds that a reaction vessel containing a mixture of titanium(IV) chloride, titanium, and chlorine at equilibrium has the following composition:
Compound Amount
TiCl4 4.18g
Ti 1.32g
Cl2 1.08g
Required:
Calculate the value of the equilibrium constant for this reaction.
Answers
The full question is shown in the image attached to this answer
Answer:
6.2 * 10^-3
Explanation:
The reaction at equilibrium is as follows;
TiCl4(l) → Ti(s)+ 2Cl2(g)
We have to obtain the concentration of chlorine gas as follows;
[Cl2] = 1.08/70.91 g/mol × 5.2 L
[Cl2] = 0.079 M
Kc = [Cl2]^2
Kc = [ 0.079]^2
Kc = 6.2 * 10^-3
