What happens to the particles of a gad when the gas is compressed

Answer: H2O + CO2 --> H2CO3

Explanation:

Water and Carbon Dioxide react to form Carbonic Acid

H2O + CO2 --> H2CO3

The theoretical yield of sodium sulfate, Na₂SO₄, formed from the reaction of 4.9 g of sulfuric acid, H₂SO₄ and 5.0 g of sodium hydroxide, NaOH is 7.1 g

First, we shall determine the limiting reactant. This is shown below:

H₂SO₄ + 2NaOH -> Na₂SO₄ + 2H₂O

From the balanced equation above,

98 g of H₂SO₄ reacted with 80 g of NaOH

Therefore,

4.9 g of H₂SO₄ will react with = (4.9 × 80) / 98 = 4 g of NaOH

From the above calculation, we can see that only 4 g of NaOH out of 5 g is needed to react with 4.9 g H₂SO₄.

Thus, the limiting reactant is H₂SO₄

Finally, we shall determine theoretical yield of sodium sulfate, Na₂SO₄ formed. Details below:

H₂SO₄ + 2NaOH -> Na₂SO₄ + 2H₂O

From the balanced equation above,

98 g of H₂SO₄ reacted to produce 142 g of Na₂SO₄

Therefore,

4.9 g of H₂SO₄ will react to produce = (4.9 × 142) / 98 = 7.1 g of Na₂SO₄

Thus, the theoretical yield of sodium sulfate, Na₂SO₄ formed is 7.1 g

Learn more about theoretical yield:

https://brainly.com/question/30945491

#SPJ1

Answer:

B

self explanatory

Explanation:

The wavelength of the radiation emitted by the argon ion laser is [tex]4.854 * 10^-7 m[/tex].

Wavelength is a property of any type of wave that refers to the distance between two adjacent points on the wave that is in phase, i.e., at the same point in their respective cycles. It is usually denoted by the Greek letter lambda (λ) and is measured in units of length, such as meters or nanometers.

The energy carried by the photon (E) is related to the wavelength ([tex]\lambda[/tex]) through the following equation:

[tex]E=hc/\lambda[/tex]; where 'h' is the Plank's Constant and 'c' is the speed of light which is [tex]3* 10^{-7} m/s[/tex].

We can say that

[tex]\lambda - hc/E[/tex]

Now after substituting the given values, we get:

[tex]\lambda = (6.626 * 10^{-34} J.s * 3.00 * 10^8 m/s) / (4.071 * 10^{-19} J)\\\lambda = 4.854 * 10^-7 m[/tex]

Therefore the wavelength of the radiation emitted by the argon ion laser is [tex]4.854 * 10^-7 m[/tex].

Learn more about the Plank's Constant at:

https://brainly.com/question/28060145

#SPJ4

To find the solution concentration, you need to know the amount of solute and the volume of the solution.

The solution concentration is typically expressed in terms of molarity (moles of solute per liter of solution). To calculate the molarity of a solution, divide the moles of solute by the volume of the solution in liters.

Another way to express solution concentration is in terms of percent by mass or volume, which is calculated by dividing the mass or volume of the solute by the mass or volume of the solution and multiplying by 100.

To find the solution concentration, you'll need to calculate the ratio of solute (substance being dissolved) to solvent (substance doing the dissolving) in the mixture.

Concentration is commonly expressed in units like molarity (M), mass/volume percent, or parts per million (ppm).

To calculate molarity (M), divide the moles of solute by the volume of the solvent (in liters). The formula is:

Molarity (M) = moles of solute / volume of solvent (L)

For mass/volume percent, divide the mass of the solute by the total volume of the solution and multiply by 100. The formula is:

Mass/volume percent = (mass of solute / total volume of solution) x 100

For parts per million (ppm), divide the mass of the solute by the total mass of the solution and multiply by 1,000,000.

The formula is:
ppm = (mass of solute / total mass of solution) x 1,000,000
Choose the appropriate formula based on the units required for your specific problem.

For more question on solution concentration

https://brainly.com/question/26255204

#SPJ11

Answer:

Vestigial

Explanation:

The retention of genetically determined traits or structures that have partially or completely lost their ancestral purpose in a specific species is known as vestigiality. In most cases, evaluating the vestigality requires comparison with comparable traits in closely related species.

Oil soap and water are  sustainable because they are both natural and biodegradable.

Oil soap is a cleaning product that is made from natural materials, such as vegetable oils and potassium hydroxide.

One of the main ways in which oil soap and water can be considered sustainable is that they are both natural and biodegradable.

In addition, using oil soap and water to clean wooden surfaces can help to prolong their lifespan, reducing the need for frequent replacements and minimizing waste.

Regular maintenance with oil soap can help to prevent dirt and grime buildup that can cause damage to wooden surfaces.

Learn more about oil soap here: https://brainly.com/question/16375181

#SPJ1

The amount of heat evolved when 25 moles of Sulfur is burned in excess oxygen is -74000 kJ.

The balanced reaction is given that is:

[tex]S_8(s) + 8 O_2(g) \rightarrow 8 SO_2(g)[/tex]

We can see that 1 mole of [tex]S_8[/tex] reacts with 8 moles of [tex]O_2[/tex] to produce 8 moles of [tex]So_2[/tex].

If 25.0 moles of [tex]S_8[/tex] reacts with excess Oxygen, then the amount of [tex]O_2[/tex] which is required in the reaction will be:

8 moles [tex]O_2[/tex] / 1 mole S8 × 25.0 moles S8 = 200 moles [tex]O_2[/tex]

We can use the enthalpy change and calculate the amount of heat evolved:

[tex]\Delta H[/tex] = -2368 kJ/ 8 moles [tex]SO_2[/tex]

The heat evolved = [tex]\Delta H[/tex] × moles of [tex]SO_2[/tex] produced

Moles of [tex]SO_2[/tex] produced =  8 moles [tex]SO_2[/tex] / 1 mole [tex]S_8[/tex] × 25.0 moles [tex]S_8[/tex]

= 200 moles [tex]SO_2[/tex].

Therefore, Heat evolved= -2368 kJ/ 8 moles [tex]SO_2[/tex] × 200 moles [tex]SO_2[/tex]

= -74000 kJ

The amount of heat evolved when 25 moles of Sulfur is burned in excess oxygen is -74000 kJ, the negative sign here indicates that the reaction is exothermic.

Learn more about the enthalpy change at:

https://brainly.com/question/28873088

#SPJ1

Answer: 285.63g of MgCl2.

Explanation:

Very easy stiochemistry question. Use the dimensional analysis. For example 1 m x 100 cm / 1m and meters get canceled out and 1 m is 100 cm.

For the question, start with the given things. You know that it was started with 72.8 grams of magnesium. Convert it to molar mass (to use moles for comparison), and then find the mass of mg.

Answer:

the pH of the solution is approximately 5.857.

Explanation:

The pH of a solution can be calculated using the formula:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in moles per liter (M).

In this case, [H+] = 1.39x10^-6 M, so:

pH = -log(1.39x10^-6)

= 5.857

Therefore, the pH of the solution is approximately 5.857.

The enthalpy of the reaction is -94.1308 kJ/mol of the metal.

First, we need to calculate the amount of heat absorbed by the water in the calorimeter. We can use the formula:

q = m × C × ΔT

where q is the amount of heat absorbed by the water, m is the mass of the water, C is the specific heat capacity of water, and ΔT is the temperature change of the water.

q = 100 g × 4.184 J/g-°C × 3.81°C = 1601.304 J

Next, we need to calculate the amount of heat released by the reaction. We can use the formula:

q = n × ΔH

where q is the amount of heat released, n is the number of moles of the metal, and ΔH is the enthalpy change of the reaction.

We know that 0.017 moles of metal reacted, and we can assume that all the heat released by the reaction was absorbed by the water in the calorimeter.

Therefore:

q = n × ΔH

1601.304 J = 0.017 mol × ΔH

ΔH = 1601.304 J / 0.017 mol = 94130.8235 J/mol

Finally, we need to convert the answer from joules to kilojoules:

ΔH = 94130.8235 J/mol / 1000 J/kJ = -94.1308 kJ/mol

Learn more about enthalpy, here:

https://brainly.com/question/16720480

#SPJ1

All of the equation-related claims are not entirely true. The appropriate chemical formula should be:

Fe(OH)3 + 3NH4Cl = FeCl3 + 3NH4OH

Because the total mass of the reactants and products are equal, as well as the number of each type of atom in each of the reactants and products, mass is conserved in this balanced equation. Depending on the stoichiometric coefficients in the balanced equation, there may or may not be an equal amount of molecules in the reactants and products.

Iron(III) hydroxide (Fe(OH)3) and ammonium chloride (NH4Cl) are the products of the chemical reaction between iron(III) chloride (FeCl3) and ammonium hydroxide (NH4OH).

The coefficients (the numbers in front of the chemical formulae) must be changed to make sure that the number of each type of atom is the same on both sides of the equation in order to ensure that the equation is balanced. The coefficients in this instance are:

Fe(OH)3 + 3NH4Cl = FeCl3 + 3NH4OH

Learn more about coefficients  at :

https://brainly.com/question/29993529

#SPJ1

After writing the correct formulas for the reactants and products, the equation is balanced by adjusting coefficients to the smallest whole-number ratio. The correct answer is option b.

Adjusting the coefficients to the smallest whole-number ratio is the process of balancing a chemical equation. Balancing the equation means that the number of atoms of each element on the reactant side must equal the number of atoms of each element on the product side.

The coefficients in front of the formulas of the reactants and products are used to balance the equation. By adjusting the coefficients, you can make sure that the number of atoms of each element is balanced on both sides of the equation. Therefore option b is correct

For more such questions on reactants, click on:

https://brainly.com/question/26283409

#SPJ11

The density of the gas is  0.0340 g/L, moles of gas in the bulb is 0.00124 mol and apparent molar mass is 111.3 g/mol.

To determine the density of the gas, use the ideal gas law:

PV = nRT

where P = pressure, V = volume, n = number of moles, R = gas constant, and T = temperature.

Since the volume and temperature are constant:

(P/n) = constant

Therefore, the density (ρ) of the gas is given by:

ρ = (m-m₀)/V = (Δm)/V

where m = mass of the bulb filled with the gas, m₀ = mass of the evacuated bulb, and Δm = m - m₀ is the mass of the gas.

Substituting the given values:

Δm = 22.651 g - 22.513 g = 0.138 g

V = 4.050 L

ρ = 0.138 g / 4.050 L = 0.0340 g/L

To find the number of moles of gas in the bulb, use the equation:

n = PV/RT

Substituting the given values:

n = (0.0250 atm)(4.050 L) / (0.0821 L·atm/mol·K)(289.2 K) = 0.00124 mol

Finally, to find the apparent molar mass of the gas, use the equation:

M = m/n

where M = molar mass of the gas and m = mass of the gas.

Substituting the given values:

M = 0.138 g / 0.00124 mol = 111.3 g/mol

Therefore, the density of the gas is 0.0340 g/L, there are 0.00124 mol of gas in the bulb, and the apparent molar mass of the gas is 111.3 g/mol.

Find out more on molar mass here: https://brainly.com/question/31600958

#SPJ1

Answer:

There are 1000 milliliters (ml) in one liter. Therefore, the teacher has a total of 6 x 1000 = 6000 ml of sodium nitrate solution.

Explanation:

To divide the solution evenly among the 24 students, we need to divide the total volume of the solution by the number of students:

6000 ml ÷ 24 students = 250 ml per student

Therefore, each student will receive 250 milliliters of sodium nitrate solution.

Answer:

Answer- 0.25ml

Explanation:

So there are 24 students and 6 liters of Solution.So to evenly distribute

Just divide 6 by 24(6÷24/)... So the answer will be 0.25

The order of the energy levels for the Li2 molecule is:

1s < σ2s < 2s < σ*2s

The 1s orbital is the lowest in energy because it is closest to the nucleus and has the highest electron density. The σ2s orbital is next in energy because it is a bonding orbital that is formed by the overlap of two atomic 2s orbitals. The 2s orbital is higher in energy than the σ2s orbital because it is an atomic orbital that has not participated in bonding. The σ*2s orbital is the highest in energy because it is an antibonding orbital that weakens the bond between the two Li atoms.

To  know more about energy levels, here

brainly.com/question/29736874

#SPJ1

Answer:

we need to know the definitions of the two types of mutations:

Looking at the definitions, we can see that a chromosomal mutation can affect many genes at once, while a gene mutation can affect only one or a few nucleotides. Therefore, a chromosomal mutation could have the most drastic effect on a gene, because it could alter or delete an entire gene or multiple genes, resulting in major changes in the phenotype or function of an organism. A gene mutation could also have significant effects on a gene, but it could also be silent or minor depending on the location and type of the mutation. Therefore, the answer is a chromosomal mutation. One possible way to back up this choice is to give an example of a chromosomal mutation that causes a genetic disorder, such as Down syndrome or Turner syndrome.

The volume of the carbon dioxide is produced at the 31.0 °C and the 0.995 atm is 119,786 L.

The number of moles of octane = 538 mol

The moles of carbon dioxide = 4888 mol

The temperature of the gas = 31.0 °C

The pressure of the gas = 0.995 atm

The volume of the gas = ?

The ideal gas equation is :

P V = n R T

Where,

The p is the pressure = 0.995 atm

The V is the volume = ?

The n is moles of gas = 4888 mol

The R is gas constant = 0.823 atm L / mol K

The T is temperature = 31 + 273 = 304 K

V = n R T / P

V = ( 4888 mol × 0.0823 × 304 ) / 0.995

V = 119,786 L

The volume is 119,786 L.

To learn more about volume here

https://brainly.com/question/29813393

#SPJ1

Jeremiah can arrange the materials in the following way to create a model that shows the processes by which water is cycled from a lake into the atmosphere and back to the lake

The following can be a representation of the water cycle;

Fill the glass jar with water to resemble the lake.

Put the lamp next to the jar to symbolize the sun.

Wrap the jar in plastic sheet to imitate the atmosphere.

Turn on the bulb to represent the sun warming the water.

When the water in the jar warms up and evaporates into water vapor, moisture will condense on the plastic wrap.

The water vapor will ascend and collect on the plastic wrap to represent the water vapor rising into the atmosphere.

Water vapor cools as it rises and condenses back into liquid form, as shown by the water droplets gathering on the plastic wrap.

Learn more about the water cycle:https://brainly.com/question/31195929

#SPJ1

Before the chairs touch, the temperature of the bottom chair is lower than the temperature of the top chair, this is because the molecules in the bottom chair are in contact with a cooler surface.

After the chairs have been touching for a while, the heat will begin to transfer from the top chair to the bottom chair through a process called conduction. This will continue until the temperature of the two chairs equalizes, at which point there will be no more net heat transfer between them.

The final temperature of both chairs will be somewhere between the initial temperatures of the two chairs, and will depend on factors such as the thermal conductivity of the material, the size of the chairs, and the duration of the contact.

To know more about the Molecules, here

https://brainly.com/question/2114821

#SPJ1

The mass of silver oxide needed to decompose in order to produce 120.6 grams of silver is 494.5 grams.

The balanced chemical equation for silver oxide breakdown is:

[tex]Ag_2O[/tex] → [tex]2 Ag[/tex] + [tex]1/2 O_2[/tex]

The equation shows that for every mole of silver oxide that decomposes, two moles of silver are created, and the molar mass of [tex]Ag_2O[/tex] is 231.74 g/mol.

Hence, using stoichiometry, we can calculate the quantity of silver oxide necessary to generate 120.6 grams of silver:

120.6 g Ag × (1 mol Ag / 107.87 g Ag) × (1 mol [tex]Ag_2O[/tex]/ 2 mol Ag) × (231.74 g [tex]Ag_2O[/tex] / 1 mol [tex]Ag_2O[/tex] )

= 494.5 g [tex]Ag_2O[/tex]

As a result, 494.5 grams of silver oxide is needed to decompose in order to produce 120.6 grams of silver.

For more such questions on silver oxide, click on:

https://brainly.com/question/27241605

#SPJ11

Answer:

Since that means that we have 0.223 moles of PbCl2 in 1000mL of solution.

Also since mole ratio of the ions Pb2+:Cl- is 1:2

Thus, moles of Pb2+ = 0.223moles

concentration of Pb2+= 0.223M

Moles of Cl- = 2x0.223 moles

Concentration of Cl- = 0.446M

Explanation:

The amount of heat absorbed during the reaction is 385.9 cal.

Calorimetry is the science of measuring the heat absorbed or evolved during the course of a chemical reaction or change of state.

The amount of heat in a reaction can be calculated as follows;

Q = mc∆T

Where;

Q = 45.4 × 1 × {31.5 - 23)

Q = 45.4 × 8.5

Q = 385.9 cal

Learn more about calorimetry at: https://brainly.com/question/25384702

#SPJ1

Answer: Moss

Explanation: It's a flowerless plant

The best solution to suppress the dissolution of MgCO3 is option D 0.200 M Na2CO3

We need to add an ion or compound that will react with MgCO3 and form a precipitate, thus removing Mg2+ and CO32- ions from the solution.

Therefore, Option D, 0.200 M Na2CO3, contains CO32- ions that can react with Mg2+ ions to form MgCO3 precipitate. This would effectively suppress the dissolution of MgCO3 by removing Mg2+ and CO32- ions from the solution.

Therefore, option D is the best solution to suppress the dissolution of MgCO3.

Learn more about dissolution here : brainly.in/question/14694236

#SPJ1

At some constant temperature, the equilibrium constant for the reaction below is Kc = .76. An empty 1.00L flask is charged with 2.00 mol carbon tetrachloride and then allowed to reach equilibrium. CCl4(g) ⇌ C (s) + 2 Cl2(g)

a. To find the fraction of the reactant (CCl4) remaining at equilibrium, we can start by determining the initial concentration of CCl4:
Initial concentration of CCl4 = moles/volume = 2.00 mol / 1.00 L = 2.00 M

Let x be the change in concentration of CCl4 at equilibrium. Then, the equilibrium concentrations are:
[CCl4] = 2.00 - x
[Cl2] = 2x
The equilibrium constant expression is given by:
Kc = [Cl2]^2 / [CCl4]
Plugging in the given Kc value (0.76) and the equilibrium concentrations:
0.76 = (2x)^2 / (2.00 - x)

Now, you can solve for x. The fraction of the reactant remaining at equilibrium is (2.00 - x) / 2.00.

b. To find the molarity of chlorine gas (Cl2) at equilibrium, you can use the value of x obtained in part (a). The molarity of Cl2 is equal to 2x.

For more questions on: temperature

https://brainly.com/question/27944554

#SPJ11

The reaction is second order with a rate constant of 0.043 mol/l min.

For CA = 0.1 mol/l, -rA = 0.1 mol/l min

For CA = 0.2 mol/l, -rA = 0.3 mol/l min

For CA = 0.3 mol/l, -rA = 0.5 mol/l min

For CA = 0.4 mol/l, -rA = 0.6 mol/l min

The slope of this line is equal to the order of the reaction (n), and the y-intercept is ln(k).

Slope = (0.6931 - (-2.3026)) / (0.3010 - (-0.9163)) = 1.929

ln(k) = -2.3026 + 1.929 * (-0.3010)

ln(k) = -3.1504

k = e^(-3.1504) = 0.043 mol/l min

The reaction is second order with a rate constant of 0.043 mol/l min.

Learn more about reaction on

https://brainly.com/question/11231920

#SPJ1

We can use the combined gas law to solve this problem:

(P1V1/T1) = (P2V2/T2)

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

We are given that the initial pressure is P1 = 37.8 mm Hg and the initial volume is V1 = 245 mL. The initial temperature is T1 = 23.5°C, which we need to convert to Kelvin by adding 273.15:

T1 = 23.5°C + 273.15 = 296.65 K

We are also given that the final volume is V2 = 54 mL, and the final temperature is the temperature of the ice water, which is 0°C or 273.15 K.

Now we can solve for the final pressure, P2:

(P1V1/T1) = (P2V2/T2)

P2 = (P1V1T2) / (V2T1)

P2 = (37.8 mm Hg * 245 mL * 273.15 K) / (54 mL * 296.65 K)

P2 = 24.4 mm Hg

Therefore, the pressure of the gas in the smaller flask at the new temperature is 24.4 mm Hg.

Answer:

Explanation:

We can use the formula:

q = mcΔT

where q is the heat absorbed, m is the mass, c is the specific heat, and ΔT is the change in temperature.

Given:
specific heat of iron (c) = 0.449 J/g°C
initial temperature (T1) = 24.0°C
final temperature (T2) = 82.1°C
heat absorbed (q) = 948.0 J

Substituting the given values into the formula, we get:

q = mcΔT
948.0 J = m(0.449 J/g°C)(82.1°C - 24.0°C)
948.0 J = m(0.449 J/g°C)(58.1°C)
m = 948.0 J ÷ (0.449 J/g°C × 58.1°C)
m = 33.1 g

Therefore, the mass of the iron piece is 33.1 g (to three significant figures)