What force is responsible for the orbit of satellites?
- energy
- friction
- magnetism
- gravity

Answers

Answer 1

Gravity is the force responsible for the orbit of satellites. Gravity is an attractive force that acts between two objects with mass.

What is satellites?

Satellites are man-made objects that are sent into space to orbit around a planet or other celestial body. They are used for a variety of purposes, including communication, navigation, scientific research, weather forecasting, and more. Satellites are equipped with advanced technology that allow them to transmit signals and data back to Earth, helping to make our lives easier in many ways. They are powered by solar panels and come in a variety of shapes and sizes. They can be stationary, meaning they stay in the same position as they orbit, or they can be geostationary, meaning they stay in the same point relative to the Earth's surface. They are also capable of providing real-time data and images to Earth-based observers. By using satellite technology, we can gain a better understanding of our planet, its climate, and its inhabitants.

This force is what causes satellites to orbit around a planet or star, as the gravitational pull of the planet or star causes them to move in a curved path.

To learn more about satellites
https://brainly.com/question/28103637
#SPJ1


Related Questions

1. solve this!!! pls help

Answers

The angle of arc m RNW is 60°, given that M is the center and RE and AN are diameters.

How to calculate arc angle?

Since RE and AN are diameters, we know that ∠REO and ∠ANO are right angles, where O is the center of the circle. Since M is also the center of the circle:

m∠RMO = 180° - m∠RMN = 80°

m∠EMO = 180° - m∠EMW = 140°

Since ∠RMO and ∠EMO share a common vertex and their non-common sides are radii of the circle, they are congruent. Therefore:

m∠RMO = m∠EMO

80° = 140° - m∠RNW

m∠RNW = 60°

So m RNW = 60°.

Find out more on circles here: https://brainly.com/question/27825139

#SPJ1

Image transcribed:

10.5.5 Your Turn! HOMEWORK

1. In Circle M, m∠RMN = 100° and m∠EMW = 40°. Calculate m RNW given that M is the center and RE and AN are diameters.

A solution of ethanol is pumped to a vessel 25 m above a reference level through a 25-mm-inside-diameter steel pipe at a rate of 10 m3 /h. The length of pipe is 30 m and contains two elbows with friction equivalent to 20 diameters each. Compute the power requirements of the pump. Solution properties include density of 975 kg/m3 and viscosity of 4 3 1024 Pa s

Answers

Answer:

To compute the power requirements of the pump, we need to determine the head loss and the pump's efficiency. The head loss in the pipeline is given by the Darcy-Weisbach equation:

hL = f (L / D) (V^2 / 2g)

where hL is the head loss, f is the friction factor, L is the length of the pipe, D is the inside diameter of the pipe, V is the average fluid velocity, and g is the acceleration due to gravity.

First, we need to calculate the fluid velocity:

Q = A * V

where Q is the flow rate, A is the cross-sectional area of the pipe, and V is the fluid velocity.

The cross-sectional area of the pipe is:

A = π/4 * D^2

A = π/4 * (0.025 m)^2

A = 4.91 x 10^-4 m^2

So, the fluid velocity is:

V = Q / A

V = 10 m^3/h / (3600 s/h) / (4.91 x 10^-4 m^2)

V = 5.04 m/s

Next, we need to calculate the Reynolds number to determine the friction factor:

Re = (ρVD) / μ

where ρ is the fluid density and μ is the fluid viscosity.

Re = (975 kg/m^3)(5.04 m/s)(0.025 m) / (4.3 x 10^-4 Pa s)

Re = 5.73 x 10^5

Using the Moody chart or a Colebrook equation solver, we can determine the friction factor for the given Reynolds number and roughness of the steel pipe. For simplicity, we will assume a friction factor of 0.02.

The head loss due to friction in the pipe is:

hL = f (L / D) (V^2 / 2g)

hL = 0.02 (30 m / 0.025 m) (5.04 m/s)^2 / (2 x 9.81 m/s^2)

hL = 24.4 m

The head loss due to the two elbows is:

hL = K (V^2 / 2g)

where K is the equivalent length of the elbow in diameters and is equal to 20 diameters each. From a piping handbook, K for a long radius 90° elbow is approximately 30 diameters.

hL = 30 (5.04 m/s)^2 / (2 x 9.81 m/s^2)

hL = 7.82 m

The total head loss is:

hL_total = hL_friction + hL_elbows

hL_total = 24.4 m + 7.82 m

hL_total = 32.2 m

The power required by the pump is:

P = ρQhL_total / η

where η is the pump efficiency.

We will assume a pump efficiency of 75%.

P = (975 kg/m^3)(10 m^3/h)(3600 s/h)(32.2 m)/(0.75)

P = 1.13 x 10^6 W or 1.13 MW

Therefore, the power requirements of the pump are 1.13 MW.

What is the acceleration of a 650 kg racing camel that has a Ford net force of 897N

Answers

The acceleration of the racing camel is 1.38 m/s².

What is the acceleration of the racing camel?

From Newton's second law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration

Given that:

Mass of the camel m = 650 kg Net force f = 897NAcceleration of the camel a = ?

To determine the acceleration of the camel, pug the given values into the abovr formula and solve for a.

F = m × a

897N = 650 kg × a

Note that: Newton N is the same as kg·m/s²

Hence;

897kg·m/s² = 650 kg × a

Divide both sides by 650 kg

a = (897kg·m/s²) / (650 kg)

a = 1.38 m/s²

Therefore, the acceleration is 1.38 meters per second sqaure.

Learn more about force here: https://brainly.com/question/11737731

#SPJ1

1.
A megaphone amplifies sound by
all the above
increasing the range of frequencies that can be produced.
focusing sound energy into one specific direction.
spreading out the sound waves over a large area.

Answers

The correct statement explaining how a megaphone amplifies sound is: "A megaphone amplifies sound by focusing sound energy into one specific direction."

How does a loudhailer increase sound volume?

By increasing the acoustic impedance perceived by the vocal chords and bringing them into closer proximity to the air, the loudhailer amplifies the sound and increases the amount of sound power that is emitted.

What kind of sound does a loudhailer produce?

Many people are familiar with the distinctively distorted sound of a human voice amplified by a loudhailer thanks to its use in train and bus stations and sporting venues. It produces the sound of a vintage acoustic phonograph record player when used with music.

To know more about sound visit:-

https://brainly.com/question/29707602

#SPJ1

The graph shows how the speed of a car travelling in a straight line changes with time. Which section shows the largest acceleration? speed A B C D time​

Answers

The section that shows the largest acceleration on the graph would be section B, as it has the steepest slope.

This indicates that the car is increasing in speed at a faster rate during this section compared to the other sections.

For more such question on acceleration

https://brainly.com/question/460763

#SPJ11

complete question not found in search engine.

6.
Sonography uses infrasonic waves to create images of objects found inside other objects.
True
False

Answers

Sonography uses infrasonic waves to create images of objects found inside other objects.-False

Sonography, commonly known as ultrasound imaging, creates pictures of structures and organs inside the body using high-frequency sound waves (rather than infrared rays). These sound waves are emitted by a transducer, a portable device put on the skin and deliver sound waves through the body. The waves reverberate off internal organs and structures and are picked up by the transducer, which generates a visual representation on a computer screen. Ultrasonic imaging is widely used in obstetrics to monitor fetal development and in other medical specialties to diagnose and treat various disorders.

To learn about Sonography

https://brainly.com/question/30225909

You decide to go skiing but fall over. As you are attempting to get back up, you see a child start to head down the hill straight for you. If the coefficient of friction between the child and the snow is assumed to be 0, and the child appears to be 20 m above you when they start down the mountain, and the incline of the mountain is 31 degrees, how long do you have to get up and out of the way before you and the child collide?

Answers

The time taken to get up and out of the way before you and the child collide is 2.82 s.

What is the time taken to get up?

The time taken to get up and out of the way before you and the child collide is calculated as follows;

s = v + ¹/₂at²

s = v + ¹/₂(g sin (31)t²

where;

v is the initial velocitys is the displacementt is the time of motion

The time taken to get up is calculated as;

20 = 0 +  ¹/₂(9.8 sin (31)t²

20 = 2.524t²

t² = 20/2.524

t² = 7.925

t = 2.82 s

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

The pressure difference between two locations is 0.005 Torr .Which one of the following barometers is preferred to measure the small pressures accurately? (knowing that: Density of mercury = 13600 kg/m³, density water = 1000 kg/m³, density of oil = 800 kg/m³
A-Mercuric barometer
B-Oil-water barometer
C-Water barometer
D-Oil barometer

Answers

Due to its high density, the mercury barometer is the greatest option for precisely measuring minor changes in pressure. The correct option is A.

A barometer is an instrument used to measure atmospheric pressure. It typically consists of a long glass tube filled with a liquid, usually mercury, and inverted in a container of the same liquid.

The preferred barometer to measure small pressures accurately would be the mercury barometer (option A), because it has a higher density compared to the other options and hence it can detect smaller changes in pressure.

To see why the other options are not as good for measuring small pressures accurately, we can compare their densities:

Oil-water barometer: The density of oil is lower than the density of mercury, so it would not be as accurate for measuring small changes in pressure.

Water barometer: The density of water is much lower than the density of mercury, so it would not be as accurate for measuring small changes in pressure.

Oil barometer: The density of oil is lower than the density of mercury, so it would not be as accurate for measuring small changes in pressure.

Therefore, option A, the mercury barometer, is the best choice for measuring small changes in pressure accurately due to its high density.

To learn more about the manometer click:

https://brainly.com/question/31073562

#SPJ1

What pressure does a 500N - pound girl produce while standing on the floor if the area of ​​the sole of one of her shoes is 60 cm²?​. pleaaasee guysss help meee

Answers

The pressure exerted by the girl is approximately 833,333.33 Pa (Pascals).

What is the inertia of motion? ​

Answers

THE INABILITY OF A BODY TO CHANGE ITS STATE OF MOTION BY ITSELF

._Its_Ńämüđà_.

The tendency of matter to resist changes in its velocity or direction of motion is known as the inertia of motion. One of the cornerstones of traditional mechanics, it is also known as the law of inertia.

What is the inertia of motion? ​

This principle states that, without an external force, an object at rest tends to remain at rest and an object in motion tends to maintain its current speed and direction. This means that until a force acts on the moving item to cause it to modify its motion, it will continue to proceed in a straight path and at a constant speed due to inertia of motion.

An object's mass affects how much inertia of motion it possesses. An object's inertia of motion increases with bulk, making it more challenging to alter its speed or direction of motion. This feature of matter has a wide range of practical uses, including predicting how moving objects will behave and creating and building systems that need to precisely regulate motion and forces.

To know more about Motion :

https://brainly.com/question/22810476

#SPJ5.

What is the force of gravity between two 70.0kg masses that are separated by 2.50m?

Answers

Answer:

F = 5.2324 x 10⁻⁸ N

Explanation:

F = G(m₁ · m₂) / r²

where F is the gravitational force, G is the gravitational constant (6.674 x 10⁻¹¹ N·m²/kg²), m1 and m2 are the masses of the two objects, and r is the distance between them.

Plugging in the given values m1 = m2 = 70.0 kg, r = 2.5 m:

F = (6.674 x 10⁻¹¹)(70.0 kg)² / (2.50 m)²

F = 5.2324 x 10⁻⁸ N

Therefore, the gravitational force between the two 70.0 kg masses separated by 2.50 m is approximately 5.2324 x 10⁻⁸ N.

What is the S-P difference (sec)?
What is the amplitude (mm)?
What is the distance (km)?
What is the magnitude (M)?

Answers

(a) The S-P difference (sec) is 40 sec.

(b) The amplitude (mm) is 10 mm

(c) The distance (km) is 380 km

(d) The magnitude (M) is 4.5

What is the S-P wave difference (sec)?

The S-P wave difference (sec) is a measure used in seismology to determine the distance between a seismic station and an earthquake source.

From the graph, the S-P difference, that is between S and P = 40 s - 0 s

= 40 s

The distance (km) corresponding to 40 sec is 380 km.

The amplitude of the wave is the maximum displacement of the wave and it is equal to 10 mm.

The corresponding magnitude of the wave is 4.5.

Learn more about S-P wave difference here: brainly.com/question/15225142

#SPJ1

A rifle with a weight of 30 N fires a 5.0-g bullet with a speed of 300 m/s. (a) Find
the recoil speed of the rifle. (b) If a 700-N man holds the rifle firmly against his
shoulder, find the recoil speed of man and rifle.

Answers

The recoil speed of the rifle is 0.5 m/s.

Weight of the rifle, W = 30 N

Mass of the rifle, M = W/g = 30/10 = 3 kg

Mass of the bullet, m = 5 g = 5 x 10⁻³kg

Speed of the bullet, v = 300 m/s

a) The expression for the recoil speed of the rifle is given by,

v(r) = mv/M

v(r) = 5 x 10⁻³ x 300/3

v(r) = 0.5 m/s

b) Weight of the man, W' = 700 N

Mass of the man, M' = W'/g = 700/10 = 70 kg

So, the combined mass of the man and the rifle,

M₁ = M + M'

M₁ = 3 + 70

M₁ = 73 kg

Therefore, the recoil speed of man and rifle,

v(r)' = mv/M₁

v(r)' = 5 x 10⁻³ x 300/73

v(r)' = 0.0205 m/s

To learn more about recoil speed, click:

https://brainly.com/question/19284095

#SPJ1

HELP ASAP

The specific heat capacity of solid copper metal is 0.385 J/g-K. How many joules of heat are needed to raise the temperature of a 1.55-kg block of copper from 33.0 °C to 99.9 °C?

3.71 × 10^−6J

39.9 J

3.99 × 10^4J

0.00371 J

2.69 × 10^5 J
IT IS A CHEMISTRY QUESTION BUT WAS PUT WITH PHYSICS BY MISTAKE SORRY

Answers

Answer: 3.99•10⁴ J

Explanation:

The Heat Formula is: Q = m • C • ΔT

Your given C, m, T₀, and T

C = 0.385 J/g•K

m = 1.55 kg or 1,550 g

T₀ = 33.0 °C

T = 99.9 °C

(ΔT = T - T₀)

Your only remaining variable is Q, heat, so you can now plug in your values to solve.

Q = (1550)(0.385)(99.9 - 33.0)

(ΔT(°C) = ΔT(K) because the conversion is linear)

Q = 39,922.575 J

or

3.99•10⁴ J

Ritalin and the pain medication Demerol have a high risk of dependence but may be used for medicinal purposes under a doctor's supervision. These substances are _____ of the CSA list.

Answers

Ritalin and Demerol are both controlled substances that have a high risk of abuse and dependence.

What is the list?

Schedule II drugs are believed to have a high abuse potential that could lead to severe psychological or physical dependence. They do, however, occasionally have other known medical applications and can be prescribed by a licensed healthcare provider.

Ritalin is an example of a stimulant, whereas Demerol is an example of an opioid. Thus the drugs that have been mentioned here are drugs that are strictly controlled.

Learn more about CSA list:https://brainly.com/question/31699275

#SPJ1

1.5 Find the center of gravity of a 100 mm x 150 mm x 30 mm T-section. H 150 mm -100 mm- G D BI 30 mm E -30 mm Figure 1.5 1.​

Answers

Answer:

Explanation:

que ricos puntitos

What force produces an extension of 2.5 cm? ​

Answers

Answer:

F = 2.5 N

Explanation:

The force that produces an extension of 2.5 cm in a spring depends on the spring constant, which is a measure of the stiffness of the spring. The force required to extend or compress a spring by a certain amount is given by Hooke's law, which states that the force is proportional to the displacement:

F = k*x

where F is the force, x is the displacement or extension of the spring, and k is the spring constant.

If we know the spring constant, we can calculate the force required to produce an extension of 2.5 cm using the equation above.

For example, if the spring constant is 100 N/m, then the force required to produce an extension of 2.5 cm would be:

F = k*x

F = (100 N/m)*(0.025 m)

F = 2.5 N

Therefore, a force of 2.5 N would produce an extension of 2.5 cm in a spring with a spring constant of 100 N/m

The mass of a density bottle is 20g when empty 70g when full of water and 695g when full of another liquid. Calculate the density of the other liquid (take density of water as 1g/cm³ (2mk) Mass of 20cm³ of the liquid ()​

Answers

Answer:

The answer is 13.5g/cm³

Explanation:

m1=20g

m3=70g

m2=695g

v=20cm³

m2-m1/m3-m1

R.d=695-20/70-20

R.d=675/50

R.d=13.5

R.d=density of liquid/density of water

density of liquid =R.d×density of water

D=13.5×1

D=13.5g/cm³

what is screw guage how does it work

Answers

Answer:

A screw gauge, also known as a micrometer screw gauge, is a precision measuring instrument used to measure small distances with high accuracy. It consists of a calibrated screw and a calibrated thimble with a spindle and an anvil face. The spindle is attached to the screw, and the anvil face is fixed to the body of the instrument.

To use a screw gauge, the object being measured is placed between the spindle and the anvil face, and the screw is turned until the spindle makes contact with the object. The thimble is then turned, which moves the spindle and the screw, until the spindle is firmly in contact with the object. The reading on the scale of the thimble is then taken, which gives the distance between the spindle and the anvil face, with a high degree of precision.

Screw gauges are commonly used in a variety of fields, including engineering, machining, and scientific research, where accurate measurements are required.

Screw gauge measures diameter with high accuracy using a screw and nut mechanism. It has a pitch and graduated thimble.

A screw check is an estimating instrument used to gauge the width of items, particularly wires and chambers, with high exactness. It deals with the rule of a screw and nut component.The screw measure comprises of a U-molded outline with a screw toward one side and a thimble at the other.

The screw has a pitch, which is the distance gone by the screw in one complete turn. The pitch is as a rule of the request for 0.5 mm. The thimble is graduated into 50 or 100 equivalent parts. The roundabout scale on the thimble must be changed to such an extent that the zero of the scale matches with the zero of the pitch scale.

To utilize the screw check, the item whose width is to be estimated is set between the iron block and the shaft. The screw is turned until the shaft simply contacts the item. The pitch scale perusing is noted.

The thimble is then turned until the zero of the thimble scale concurs with the middle line of the pitch scale. The thimble scale perusing is then noted. The breadth of the item is then determined by adding the pitch scale perusing and the thimble scale perusing.

Along these lines, a screw check can gauge widths to an exactness of 0.01 mm or better. It is broadly utilized in designing, fabricating, and logical applications.

To know more about screw guage, refer:

https://brainly.com/question/11428408

You are an astronomer and are making observations about a
visible but faraway galaxy. In 2-3 sentences, describe what evidence you could gather to gain more information about (1) the galaxy's elemental
composition and (2) its motion relative to the Milky Way Galaxy.

Answers

To determine the elemental composition of the faraway galaxy, would use spectroscopy to analyze the light that is emitted or absorbed by the galaxy. This technique enables me to determine the types of atoms and molecules that are present in the galaxy, providing insights into its elemental composition.

To determine the galaxy's motion relative to the Milky Way, would use the Doppler effect to measure the galaxy's redshift or blueshift. This would enable me to determine whether the galaxy is moving away from or towards us, and at what speed, providing information about its motion relative to our galaxy.

It could also look for any gravitational lensing effects, which could indicate the presence of massive objects that are influencing the galaxy's motion.

To know more about galaxy

https://brainly.com/question/24921394

#SPJ1

A woman weighs 100 kg and wants to know the force that the heels of her different shoes put on the new carpet by standing on one foot. The different shoes, A, B, C, D have heels of area 1cm, 4cm, 8cm and 64cm.
Which heel applies greater force to the carpet?


Answer: ALL EQUAL
^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^
Answer: ALL EQUAL

Answers

Shoe D.

The heel of shoe D applies the greatest force to the carpet because it has the largest surface area in contact with it, and thus the largest force is distributed over that larger area.

What is the acceleration of a 650 kg racing camel that has a forward net force of 897N

Answers

Answer:

a = 0.724 m/s2

Explanation:

Known:

m = 650 kg

F = 897 N

a = ?

Use this formula:

F = ma

a = F/m

a = 650/897

a = 0.724 m/s2

Two cars are moving with velocities 70 km/hr and west direction respectively.Find their relative velocity.​

Answers

Answer:

Explanation:

To find the relative velocity of two cars moving in different directions, we need to subtract their velocities. In this case, one car is moving with a velocity of 70 km/hr and the other car is moving with a velocity in the west direction.

Let's assume that the velocity of the second car is also 70 km/hr. Since the car is moving in the west direction, we can represent its velocity as -70 km/hr (negative sign indicates motion in the opposite direction).

Now, we can find the relative velocity of the second car with respect to the first car by subtracting the velocity of the first car from the velocity of the second car:

Relative velocity = Velocity of the second car - Velocity of the first car

= (-70 km/hr) - (70 km/hr)

= -140 km/hr

Therefore, the relative velocity of the second car with respect to the first car is -140 km/hr, which means that the two cars are moving away from each other at a speed of 140 km/hr.

PLS MARK ME BRAINLIEST

Identify how each machine changes the way work is done so as to be useful.

Answers

The machine changes how work is done, by making the process easier and increasing output with less effort.

What is a machine?

Any device that uses energy to carry out a task is a machine. Machines can be simple, like a lever or pulley, or complex, like a computer or a car engine. The purpose of a machine is to make work easier, faster, or more efficient than it would be without the machine. Different types of energy, including human power, electricity, and fuel, can be used to power machines.

Bicycle: A bicycle is a human-powered machine that allows people to move faster and with less effort than walking or running. A person can travel farther distances faster and with less physical effort by turning the wheels and shifting gears with their pedaling motion.

Ax blade: An ax blade is a cutting tool used for chopping wood. It facilitates the process of splitting wood by utilizing a sharp metal blade to cut through the wood fibers, rather than depending exclusively on physical power to break the wood apart.

Car jack: A car jack is a mechanical device used to lift a car off the ground. A person can raise the car to access the underside for repairs or maintenance by pulling a lever and applying hydraulic pressure. Compared to attempting to lift the car manually, this makes maintenance and repairs easier and safer.

Learn more on machines here https://brainly.com/question/388851

#SPJ1

What is the natural period of oscillation of your leg when you march? Compute your velocity? Explain your answer; make comments. (Please use formula and explain with your words clearly)

Electric Electronics Engineering course - Vibrations and Titrations

Answers

The natural period of oscillation of a leg when marching is the time it takes for one complete cycle of oscillation. It can be calculated using the formula:

T = 2π √(L/g)

What is the oscillation  about?

Where T is the natural period of oscillation, L is the length of the leg, and g is the acceleration due to gravity (9.81 m/s^2).

Assuming an average leg length of 1 meter, the natural period of oscillation of a leg is:

T = 2π √(1/9.81) ≈ 0.64 seconds

To compute the velocity of the leg during the march, we can use the formula:

v = 2πL/T

where v is the velocity, L is the length of the leg, and T is the natural period of oscillation.

Substituting the values, we get:

v = 2π(1)/(0.64) ≈ 9.8 m/s

Therefore, This means that during the march, the leg moves back and forth with a velocity of approximately 9.8 meters per second. It's important to note that this calculation assumes a simple harmonic motion, which may not be the case in reality due to the complex motion of various joints and muscles involved in marching.

Learn more about oscillation from

https://brainly.com/question/12622728

#SPJ1

A block is dropped from rest. It takes a time t, to fall the first third of the distance. How long does it take to fall the entire distance? a) √3t₁ b) 3t₁ c) 9t₁ d) None of the above to = 0 ti t₂ TITI Vo = 0 S₂ = X S₁ = x/3 ​

Answers

The time it will take the block to fall the entire distance is (a) √3t₁.

How to determine time in motion?

Use the equations of motion to solve this problem. The equation to use is:

S = (1/2)gt²

where S = distance, g = acceleration due to gravity, and t = time.

First find the time it takes to fall the first third of the distance. The distance fallen is S₁ = x/3, so:

x/3 = (1/2)gt₁²

Solving for t₁:

t₁ = √((2x)/(3g))

Now, find the time it takes to fall the entire distance. The total distance is S₂ = x, so:

x = (1/2)gt₂²

Solving for t₂:

t₂ = √((2x)/g)

Substituting x with 3S₁:

t₂ = √((6S₁)/g)

Substituting t₁:

t₂ = √((4x)/(3g)) = √(4/3)t₁

Therefore, the answer is (a) √3t₁.

Find out more on motion here: https://brainly.com/question/25951773

#SPJ1

what is scientific learning​

Answers

Answer:

the learning which is gained through observation and experimentation

How many centimeters is half of a 87.3 km road?
Your result must be in multiples of 108 cm. That means if, for example, you get a result of a
9.2200x108 just type 9.2200 in the answer box. Include four digit after the decimal point and
maximum of 1% of error is accepted in your answer.

Answers

Half of 87.3 km is 43.65 km.

To convert km to cm, we need to multiply by 100,000 (since there are 100,000 cm in 1 km).

So, 43.65 km = 43.65 x 100,000 = 4,365,000 cm.

To express the answer in multiples of 108 cm, we need to divide by 108 and round to four decimal places.

4,365,000 cm ÷ 108 = 40,416.6667

Rounding to four decimal places gives us 40.4167.

Therefore, half of an 87.3 km road is approximately 40.4167 x 108 cm.

(i) The car starts from rest. From time = 0 to time = 15 s, the car has a constant acceleration to a speed of 28 m/s. From time = 15 s to time = 32 s, the car has a constant speed of 28 m/s. From time = 32 s, the car has a constant deceleration of 2.0 m/s² until it comes to rest. On Fig. 1.1, draw the graph, using the space below for any calculations.​

Answers

The total distance covered during all three phases is approximately 882.375 m.

How to solve

The car undergoes three phases: initial acceleration, constant speed, and deceleration.

In the first phase, it accelerates at 1.8667 m/s² for 15 seconds, covering 210.375 m.

In the second phase, it travels at a constant 28 m/s for 17 seconds, covering 476 m.

In the final phase, it decelerates at 2 m/s² for 14 seconds, covering 196 m.

The total distance covered during all three phases is approximately 882.375 m.

Read more about acceleration here:

https://brainly.com/question/460763

#SPJ1

3.
What is sonography?
using infrasonic waves to communicate long distances
through the ground
using ultrasonic waves to communicate and hunt for prey
MacBook Air
using infrasonic waves to create images of submerged
objects
using ultrasonic waves to create images of objects found
inside other objects

Answers

The correct answer is using ultrasonic waves to create images of objects found inside other objects.

What do the terms "infrasonic" and "ultrasonic" mean?

Infrasonic Wave: An infrasonic wave is a longitudinal elastic wave whose frequency is lower than that of sound, or 20Hz. For instance: It typically occurs during an earthquake. Ultrasonic Wave: An ultrasonic wave is a longitudinal wave with a frequency greater than the threshold of human hearing, or 20 kHz.

What do ultrasonic and infrasonic waves consist of?

The audible range of frequencies below 20 Hz is known as infrasonic. Volcanoes, earthquakes, and thunder all emit sound in the infrasonic range. Human ears cannot hear this sound, but elephants and whales can. Ultrasonic frequencies are those that are above 20,000 Hz.

To know more about waves visit:-

https://brainly.com/question/25954805

#SPJ1

Other Questions
What is the main difference between goal seek and variable data tables?. One support of the behavioral perspective is how b. f. skinners ideas have brought to light how the __________ and __________ influence personality. a. subconscious . . . conscious b. environment . . . learning c. environment . . . subconscious d. subconscious . . . learning please select the best answer from the choices provided a b c d Structures that result from the emplacement of magma into preexisting rocks are called ________. plutons host rock country rocks extrusions A 192 gram piece of copper was heated to 100.C in a boiling water bath, then it was dropped into a beaker containing 850. mL of water at 4.00C. What is the final temperature of the copper and water after they come to thermal equilibrium? Note: The specific heat of copper is 0.385 J/g C. Do not round your answer in the middle of the problem. Round at the very end.Round your answer to the correct number of sig figs. Your units should be degrees Celsius. A local flooring company is retiling your kitchen. Your kitchen is a rectangle with dimensions of 7 ft by 15 ft. You are going to use square tiles that measure 6 by 6 inches. Assuming the tiles lay completely flush with one another on the floor (no space in between) How many tiles will the flooring company need to buy? In complex numbers what is the multiplicative inverse of 2i The ratio of three numbers is 6 : 1 : 5. The sum of the numbers is 36. What are the three numbers? SOS HELPPPPP Please help these 3 are Biology questions i need a hand withFor three answers i will give 30 points no trolls What is the name of Winston's mother? About 1984 the Senators won 18 more games than they lost. they played 78 games. how many games did they win? The table shows transactions from a bank account. fill in the missing number for box a.transaction amount account balancetransaction 1 150 150transaction 2 50 100 transaction 390 atransaction 4-200 btransaction 5 c 0btw this is integers 2. Although Kevin has money, he is not spending it.Complex or compound -complex The goal of reforming correctional populations and preparing them to reenter society prior to release has mostly been abandoned since 1975, largely due to...Question 7 options:the publication of Robert Martinson's report on the effectiveness of rehabilitative programs concluding "Nothing Works". the declining popularity of disco music. the resignation of Richard Nixon and Gerald Ford's assumption of the presidency.the recession between 1973 and 1975 which strained government budgets. Determine whether Rohe Theorem can be applied to on the dood inter - 2x-) -1.31 WSA. Yes, Rolle's Theorem can be applied B. No, because is not continuous on the closed intervals Lead(II) nitrate and ammonium iodide react to form lead(II) iodide and ammonium nitrate according to the reactionPb(NO3)2(aq)+2NH4I(aq)PbI2(s)+2NH4NO3(aq)What volume of a 0.350 M NH4I solution is required to react with 415 mL of a 0.120 M Pb(NO3)2 solution?How many moles of PbI2 are formed from this reaction? Please help I am giving a lot of pointsA circle has been dissected into 16 congruent sectors. The base of one sector is 1. 56 units, and its height is 3. 92 units. Using the area of a triangle formula, what is the approximate area of the circle?circle A is dissected into 16 congruent sectors, one sector is highlighted27. 52 units248. 25 units248. 92 units276. 44 units2 What kingdom/s bordered the Red Sea? rewrite the expression 4^-2 x 8^0 x 5^6 A sequence can be generated by using gn = 2(gn-1), where g1 = 1/3 and n is a whole number greater than 1.What are the first 5 terms of the sequence? Please help I need it ASAP