A solenoid is configured to produce a magnetic field of 0.027T at its center. it has radius 1.4 cm and length 40cm and the wire can carry a maximum length of 12.0A. What is the total length required
The total length of the wire required is 63 m.
What is current?The current is the stream of charges which flow inside the conductors when connected across the end of voltage.
Given is a solenoid is configured to produce a magnetic field of 0.027T at its center. it has radius 1.4 cm and length 40cm and the wire can carry a maximum current of 12.0 A.
Radius, r = 1.4cm = 0.014 m
Length l = 40 cm = 0.4 m
If the current is I, then the magnetic field in solenoid is given by
B = μ₀ n I
By substituting the values, we get
0.027 = 4π x 10⁻⁷ x n x 0.4
n = 1792 turns/unit length
Total length of wire = circumference x Turns
L = 2πr x N
where N = nl
Plug the values, we get
L = 2π x 0.014 x1792 x 0.4
L = 63 m
Thus, the total length of the wire is 63 m.
Learn more about current.
brainly.com/question/10677063
#SPJ1
An astronomer wants to observe a cloud of dust in a relatively close part of the Galaxy. Unfortunately, this dust cloud is not located in the direction of a crowded region of stars. What instrument would be the most help in finding this cloud. Group of answer choices a visible-light telescope (like the Keck) with a camera or CCD detector a spectroscope that can search for the line radiation from highly ionized atoms an x-ray telescope in orbit around the Earth a sensitive infra-red telescope in orbit around the Earth
The instrument that would be the most help in finding this cloud is D. a sensitive infra-red telescope in orbit around the Earth.
What is an astronomer?It should be noted that an astronomer is a scientist who focuses on the study of the Earth.
In this case, the instrument that would be the most help in finding this cloud is a sensitive infra-red telescope in orbit around the Earth.
Learn more about astronomy on:
brainly.com/question/1141458
#SPJ12
(a) that the acceleration (A) will have no components that are identically zero. (B) may have some components that are identically zero. (C) will have only a z component that is identically zero. (D) will have an identically zero z component, and maybe an identically zero component in the x or y directio
Answer:
D.
Explanation:
acceleration in the z component = velocity in z component / time. The question states velocity in z component is zero. Therefore, acceleration in z component = 0/time = 0.
Now the question does not specify whether the other velocity vectors (x or y) is zero or not. So its D.
What words experiences in Niels Bohrs life That led to his interest in science and the study of the atom
The words experiences in Niels Bohr's life that led to his interest in science and the study of the atom is he disliked writing essays and talented in mathematics.
What is atom?Atom is the smallest unit of the element. Different elements have different size atoms and same element have same size atoms.
Neil Bohr loved talking, he had a disliking of writing essays. He was talented in mathematics. He then attracted to the sciences. Physics interested Neil and when he was a teenager, he started correcting the mistakes in his school's textbooks.
The contributions are present in the modern atomic model. They are: All matter consists of atoms. Atoms of the same element are the same in size and atoms of different elements are different. Atoms combine in whole-number ratios to form compounds.
Thus, Physics interested him to further study for atom.
Learn more about atoms.
https://brainly.com/question/1566330
#SPJ1
B
Which actions most likely cause the domains within a material to lose their alignment and become more
randomized? Check all that apply.
heating the material
Orubbing the material against a magnet
O passing electricity around the material
O placing the material in a magnetic field of opposite polarity
O placing the material near a strong magnet
O hitting the material
Mark this and return
Next
Submit
Answer: 2, 3, and 5
Explanation:
What is the main difference between a longitudinal wave and a transverse wave? a longitudinal wave always travels faster than a transverse wave. a longitudinal wave does not need a medium to travel through. a transverse wave is made of particles that move perpendicular to the motion of the wave. a transverse wave always carries more energy so that it can travel through empty space.
In a longitudinal wave, the propagation of energy is in the direction of the motion, while in a transverse wave the propagation of energy is perpendicular to the direction of motion.
What is longitudinal wave and Transverse wave?Longitudinal wave is a wave which moves in the direction from where it was started. It has a compression (increased intensity) of the medium particles and a rarefaction ( reduced intensity).
Transverse wave is wave that travels perpendicular or at right angles to the direction from where it was started.
The main differences between longitudinal wave and Transverse wave are:
Transverse wave, the medium moves vertically up and down while in the longitudinal wave, the medium moves left to right.Transverse wave has a crest and a trough while the longitudinal waves have a compression and rarefaction.Transverse waves don't have a pressure variation , longitudinal waves have a pressure variation.Transverse waves can only be propagated in solids and on the surfaces of liquids, Longitudinal waves can be propagated in solids, liquids and gases.Transverse waves don't change in density throughout the medium, longitudinal waves have a change in density throughout the medium.Therefore,
The propagation of energy is in the direction of the motion, while in a transverse wave the propagation of energy is perpendicular to the direction of motion.
Learn more about longitudinal wave and Transverse wave here:
https://brainly.com/question/3513157
#SPJ1
The diagram shows changes of state between solid, liquid, and gas. The atoms of a substance lose energy during a change of state. Before the change, the atoms are close together but are able to slide past one another.
A diagram has a triangle at center with gas on top, liquid on bottom right, solid on bottom left. An arrow from gas to liquid is labeled O, and an arrow from liquid to gas is labeled N. An arrow from solid to liquid is labeled P, and an arrow from liquid to solid is labeled Q. An arrow from solid to gas is labeled L, and an arrow from gas to solid is labeled M.
Which arrow represents the change of state described above?
M N P Q
Answer:
its Q
Explanation:
When you see a quantity like 20 m/s N, how do you know that it's a vector quantity and not a scalar quantity?
We know that 20 m/s N is a vector quantity because N in the expression signifies the direction
What is a vector quantity?This is a which have both magnitude and direction. Example include:
VelocityDisplacementForceAccelerationMomentWeightHow to determine whether 20 m/s N is a vector quantity20 m/s indicates just the speed i.e magnitude20 m/s N indicates the speed i.e magnitude why the N indicates the direction.Thus, we can conclude that 20 m/s N is a vector quantity because it has both magnitude and direction.
Learn more about scalar and vector quantity:
brainly.com/question/774036
#SPJ12
A projectile is launched at an angle of 29 degrees above the horizontal with an initial velocity of 36.6 at an unknown height.
The magnitude of the vertical velocity upon returning to its original, unknown height is _____ m/s.
The magnitude of the unknown height of the projectile is determined as 16.1 m.
Magnitude of the height
The magnitude of the height of the projectile is calculated as follows;
H = u²sin²θ/2g
H = (36.6² x (sin 29)²)/(2 x 9.8)
H = 16.1 m
Thus, the magnitude of the unknown height of the projectile is determined as 16.1 m.
Learn more about height here: https://brainly.com/question/1739912
#SPJ1
Examples of kinetic theory of convection
Answer:
example of kinetic theory include brownian motion the random movement of the particles because the consolation with the air molecules and how gas is behave boiling and j l also this cyclone explain how temperature affects the
Which would most likely cause a decrease in the rate of energy production in a fusion nuclear reactor? a drop in the temperature in the reactor an increase in the number of neutrons in the reactor an increase in the amount of nuclear fuel used in the reactor a drop in the number of reactions that involve the splitting of nuclei
A drop in temperature would most likely result in a decline in the rate of energy production in a fusion nuclear reactor.
What is nuclear power?The utilization of nuclear reactions to generate energy is known as nuclear power.
Nuclear power facilities produce the great bulk of the electricity generated by nuclear fission of uranium and plutonium.
The environment should be hot enough for the deuterium and tritium ions' kinetic energies to be sufficient to break through the Coulomb barrier and fuse together.
Therefore, a decrease in temperature would most likely cause a decrease in the rate of energy production in a fusion nuclear reactor.
To learn more about nuclear power here;
brainly.com/question/9859575
#SPJ1
A firework with a mass of 1.5 kg shoots up into the air with a velocity of 25 m/s. It then explodes. Use this information to work out the total momentum of all the pieces after the firework explodes
Answer:
37.5 kg⋅m/s
Explanation:
p = mv
p = (1.5)(25) = 37.5 kg⋅m/s
Momentum is conserved in all collisions and explosions!
Propane (c3h8), a common fuel, reacts with oxygen to form carbon dioxide and water according to the equation below. c3h8 5o2 → 3co2 4h2o how many grams of oxygen are required to produce 37.15 g co2? 37.15 g co2 = g o2
The amount of oxygen will be 22.29 gm required to produce 37.15 g co₂.
What is a chemical reaction?One or more compounds, known as reactants, are transformed into one or more distinct substances, known as products. Such a process is known as a chemical reaction.
Given reaction;
[tex]\rm C_3h_8 +5O_2 }\rightarrow 3CO_2 +4H_2O[/tex]
The quantity of oxygen is x and the quantity of carbon dioxide is y then the ratio of their composition is found as;
5x=3y
5x=37.15
x=3×37.15/5
x=22.29 gm
Hence the amount of oxygen will be 22.29 gm
To learn more about the chemical reaction refer to the link;
https://brainly.com/question/22817140
#SPJ1
Answer: 45.02 (g O2)
Explanation: The person above me is wrong...but this is the right answer on edge! Ik cuz i just did this assignment and got 100% Hope this helps :D
2) A skier stands at rest and begins to ski downhill with an acceleration of 3.0 m/s² {downhill). What is
her displacement after 15.0 seconds?
Answer:
her displacement s=337.5m
Explanation:
check out the above attachment ☝️
Displacement after 15.0 seconds s= 337.5 m
What is acceleration?
The rate of change of velocity is called acceleration.
Acceleration. speed is the charge of the exchange of displacement. Acceleration is the charge of the exchange of speed. velocity is a vector quantity because it consists of each significance and direction. Acceleration is also a vector quantity as it's far just the fee of alternate of pace.
Acceleration of 3.0 m/s²
Time= 15.0 seconds
S= ut + 1/2 at²
S = 0+0.5*3*15*15
=337.5 m
Learn more about acceleration here:-https://brainly.com/question/460763
#SPJ2
when a boy jumps into a pool
Answer:
energy only
Explanation:
Water waves transfer energy via oscillations of the water molecules, but the the water molecules themselves do not move along the wave.
This is why when the boy jumps into the water, his kinetic energy is transferred by the water molecules across the pool, but neither the boy nor the water particles move along with the wave.
Which planet in our solar system, discovered in 1781, was named after the greek god of the sky?.
Answer:
i think the planet is Uranus
Select the definition that best describes the term “ultimate tensile strength.”
Ultimate tensile strength is the maximum stress that a material can withstand just before fracture.
What is stress?
Stress is defined as the force acting per unit area. It is denoted by Sigma(σ)
When a body is undergoing stretch by applying a pull force, it stretches more and more until it reaches its elastic limit. A point comes when the body no more stretches and breaks or fractures at bottle neck formation. This strength of any material is known as Ultimate breaking Stress or Ultimate tensile strength.
Thus, Ultimate tensile strength is the maximum stress that a material can withstand just before fracture.
Learn more about Stress.
https://brainly.com/question/12871096
#SPJ1
If a volume of air is warmed, it expands and tends to
if a volume of air is warmed it expands due to increased translational kinetic energy as it expands it will start to cool.
When does temperature increase volume?We can then conclude that at constant pressure, temperature and volume are directly proportional: temperature increases, volume increases; decrease temperature, decrease volume.
In this case, the higher the temperature, the greater the kinetic energy that acts on the molecules of this gas, so when the gas expands, these molecules find more space and collide less, which will cause the gas to cool.
See more about volume at brainly.com/question/1578538
#SPJ12
The pendulum below swings in periodic motion between point A and point B. At which point does the pendulum have the least potential energy?
The pendulum have the least potential energy at the point C between point A and B because it is lower in height as compared to other points.
What is potential energy?Potential energy is the energy held by an object because of its position. If the object is present at a certain height, it has more potential energy as compared to object which is lower in height.
So we can conclude that the pendulum have the least potential energy at C point that is between point A and B.
Learn more about energy here: https://brainly.com/question/13881533
#SPJ1
What is the purpose of the scapula to move during arm elevation?
The purpose of the scapula to move during arm elevation is increase the range of elevation of the arm.
What is the importance of movement of the scapula during arm elevation?The scapula is an important bone which is found in the shoulder and back region of the body.
The scapula enables and increases the range of motion of the arm with its motions.
During arm elevation, the scapula undergoes an upward rotational motion.
Therefore, the purpose of the scapula to move during arm elevation is increase the range of elevation of the arm.
Learn more about scapula motion at: https://brainly.com/question/5133017
#SPJ12
If you push a 200 kg box with a horizontal force of 1,172 N and kinetic friction resists the motion with a force of 962 N, what is the resultant acceleration in m/s2
Answer:
a = 1.05m.s²
Explanation:
Fnet = m×a
Fapplied - friction = m×a
1172 - 962 = 200 × a
210 = 200a
a = 1.05
Which observations most likely led to Jenna’s conclusion?
a change of odor
a decrease in temperature
a change in moisture content
a decrease in mass
The findings that most likely contributed to Jenna's conclusion were a change in smell. Option A is correct.
What is odor?A fragrance, usually an unpleasant one: The smell of sweaty feet was palpable throughout the space. Our body odor has a big impact on the kinds of scents we enjoy.
The complete question is;
"Jenna pulled out an open bowl of leftover mashed potatoes from the fridge and smelled something different. She discovered that since the potatoes were initially placed there, chemical changes had taken place. Which facts most likely supported Jenna's judgment?
a change of odor
a decrease in temperature
a change in moisture content
a decrease in mass"
The observation that most likely inspired Jenna to draw her conclusion was a change in odor.
Hence, option A is correct.
To learn more about the odor refer;
https://brainly.com/question/5396055
#SPJ1
Answer:
A change in odor
Explanation:
When the sun runs out of hydrogen in its core, it will become larger and more luminous because:.
Answer:
Because the size of the star has expanded, the surface cools down and goes from white-hot to red-hot. Because the star is brighter, redder and physically larger than before, we dub these stars "red giants"
How to add two on/off switches that can change the brightness of the light in circuit a without turning it off
Answer:
ressistor
Explanation:
Gerry is looking at salt under a powerful microscope and notices a crystalline structure. What can be known about the salt sample that Gerry is looking at?
The atoms have spread out from each other.
The atoms are sliding past each other.
The atoms have no particular pattern.
The atoms are vibrating in place.
i know it is c
here is the answer
Because of wave refraction, erosion along an irregular coastline is:
Because of wave refraction, erosion along an irregular coastline is greatest in headlands.
What is Refraction?This is referred to as the bending of light as it passes from one medium to another with its speed being changed.
Refraction causes erosion along an irregular coastline to be greatest in headlands which is the area of land projected out toward the sea.
Read more about Refraction here https://brainly.com/question/1360744
#SPJ12
how does radiation differ from conduction and convection for the transference of heat
?
Answer:
look below! :)
Explanation:
Radiation transfers heat through electromagnetic waves
conduction transfers heat through direct contact of things
convection transfers heat through movement of air or water
Assuming a current is flowing, what increases the strength of the magnetic field of a coiled electrical wire?.
Answer:The amount of current flowing
Explanation:this derives from amperes law of maxwell’s equations. It’s easiest to see in differential form. The curl of the magnetic field is proportional to the current plus the change (time derivative) in electric field
If the current in each wire is the same, which wire produces the strongest magnetic field?.
any three methods to increase efficiency of a simple machine?
Answer:
lubricant (decrease friction).
control production speed.
use only when required.
