Answer:
A
Explanation:
I'm pretty sure that this answer is correct please let me know!
The density of an object can be found using
(A) Pascal's Law
(B)Hooke's Law
(C)Archimedes' Principle
(D)Principle of floatation
convex mirror is used as a rear view mirror in vehicles why give reasons
Answer: We prefer a convex mirror as a rear-view mirror in vehicles because it gives a wider field of view, which allows the driver to see most of the traffic behind him. Convex mirrors always form a virtual, erect, and diminished image of the objects placed in front of it.
An airplane is flying at 80 kilometers per hour when a strong tail wind, traveling in the same direction at 5 kilometers per hour, hits the airplane. How can the net force acting on the airplane be calculated?
A. add the forces
B. subtract the forces
C. multiply the forces
D. divide the forces
Answer:
A.add the forces
Explanation:
since they're both going in the same direction then they should be added to get the total net force.
pls mark me brainliest
The net force acting on the airplane if, An airplane is flying at 80 kilometers per hour when a strong tailwind, traveling in the same direction at 5 kilometers per hour is 85 km/hr so, option A is correct.
What is force?Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces.
For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.
Given:
An airplane is flying at 80 kilometers per hour when a strong tailwind, traveling in the same direction at 5 kilometers per hour,
Calculate the net force acting on the airplane as shown below,
The net force acting on the airplane = The velocity of the airplane + velocity of the wind (As they both are in the same direction)
The net force acting on the airplane = 80 km / hr + 5 km / hr
The net force acting on the airplane = 85 km / hr
Thus, the net force acting on the airplane is added.
To know more about Force:
https://brainly.com/question/13191643
#SPJ2
What does the force between electric charges depend on
Answer:
Electric force and the inverse square law
Both forces act along the line joining the objects (masses or charges). Both forces are inversely proportional to the square of the distance between the objects, this is known as the inverse-square law.
Theo and Kelly are fighting over a remote control. Theo is pulling with a force of 32 N to the left and Kelly is pulling with a force of 38 N to the right. What is the final net force and direction of movement of the remote?
Answer:
6N to the right
......
.....
An object moving in the air at a constant speed is considered to be in a balanced state. Explain Why
Answer:
and there is no friction
Explanation:
An object at rest has zero velocity - and (in the absence of an unbalanced force) will remain with a zero velocity. Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force. An object in motion with a velocity of 2 m/s, East will (in the absence of an unbalanced force) remain in motion with a velocity of 2 m/s, East. Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force. Objects resist changes in their velocity.
how do I write an essay on how I feel about online school
Answer:
Some students appreciated the social aspect of Zoom classrooms, while others felt online education worked best for them when they were working on their own. ... Students said they appreciated having a well-planned work week and didn't appreciate “surprise” assignments online any more than they appreciate them in class
Explanation:
What's I know I said
What do you u write it
What is the major source of energy on Earth? Group of answer choices a.photosynthesis b.fossil fuels c.EM waves from the sun d.
plants that are used for food.
Answer:
Em waves from the sun d
Explanation:
Answer:
The answer is photosynthesis
Explanation:
What does it mean when the
compressions of a longitudinal
wave are far apart?
A. the amplitude is higher
B. the wavelength is longer
C. the wavelength is shorter
D. the amplitude is shorter
Answer:
it will option B,hope it helps
C. The wavelength is longer.
What is longitudinal wave?
A sound wave is called a longitudinal wave because compressions and rarefactions in the air produce it.
The air particles vibrate parallel to the direction of propagation.
A longitudinal wave consists of a repeating pattern of compressions and rarefactions.
Thus, the wavelength is commonly measured as the distance from one compression to the next adjacent compression or the distance from one rarefaction to the next adjacent rarefaction.
Longitudinal waves move through a medium from the point of the disturbance in the form of compressions (where particles of the medium are bunched together) followed by rarefactions (where particles of the medium are farther apart).
In longitudinal waves, the distance from one compression to the next is the wavelength.
Therefore,
In longitudinal wave the wavelength is longer.
Learn more about Longitudinal wave here:
https://brainly.com/question/2463407
#SPJ2
Storm water picks up pollutants off of these types of surfaces because they are not able to absorb rainfall
Answer:
True.
Explanation:
Rainwater cannot be absorbed by some surfaces. This prevents these water from infiltrating and traveling through this area, taking with it the potential pollutants that it may present, such as sediment, remains of fertilizers, bacteria, animal waste, pesticides, metals, among others. This causes a process that we can call Diffuse Pollution and can cover large areas and even bodies of water.
A 6000 kg African elephant walks 13 meter
around the park. Determine the acceleration of
an African elephant in m/s2 if it has a work
done of 500J.
20 POINTS! PLZ HELP ME. :-)
Answer:
A
Explanation:
Because both the elements are non-metals
(V) What are the objectives of the space mission?
Explanation:
I hope this helps, I got this from another person
5. Identify the reactants in this chemical equation:
2H3PO4 → HAP20, +H2O
Answer:
H=Hydrogen, PO4=Phosphate
Explanation:
Reactions are on the left side of arrow and products are on the right side of arrow.
6. Suppose the resistance of your body between your right and left hands is 500,000 N. What
would be the current flowing through your body if you touched the plus and minus terminals of
a 120 V battery? The threshold of sensation for electric current through your body is about
300 PA. Would you feel the current?
HELP PLS
The unit of power of a lens is.
(a) Metre
(b) Dyne
(c) Dioptre
Answer:
c. dioptre that's the answer.
An 6 kg object accelerating from 17 m/s to 10 m/s. What is the change in momentum of the object?
Answer:
- 42
Explanation:
m = 6kg
vi = 17 m/s
vf = 10 m/s
delta mv = ?
Formula
delta mv = m*(vf) - m(vi)
delta mv = 6(10 - 17)
delta mv = 6(-7)
delta mv = - 42 kg m/s
Gizmos Warm Up Energy constantly changes from one form to another, but in a closed system, the total amount of energy always remains the same. This concept is known formally as the law of conservation of energy The Energy Conversion in a System Gizmo allows you to observe the law of conservation of energy in action. In the Gizmo, a suspended cylinder has gravitational potential energy. When the cylinder is released, the gravitational potential energy is converted into kinetic energy, which causes the stirrer in the water to spin. 1. What is the initial temperature (T) of the water?
Answer:
25 Celsius
Explanation:
Can somebody plz help me with this one the question is in the screen shot.
this is in order.
LANDFILL
GROUNDWATER
PESTICIDE
FERTILIZER
HAZARDOUS WASTE
SEPTIC SYSTEM
SEEPAGE
Describe each part of the scentific method explain why it is important to follwo this structure when conducting a scietifc investigation
Answer:
Asking a question
Research existing sources
Define an hypothesis
Design and conduct a study
Draw conclusion
Report result.
Explanation:
Scientific study simply means establishing the existence or proving the veracity of an hypothesis, hence making it a fact. A scientific study follows an orders set of procedure;
Asking a question is the first step as this is what prompts the research, question usually stems after making an observation.
The a observation made and question asked will lead to making research on the observed phenomenon, this is to check if such question has been asked in the past and maybe any scientific study as been carried out in the past.
To make research further, an hypothesis is defined in a bid to find more evidence to support one's observation through experiment.
Study design and implementation is next as the type of study to be embarked upon will determine which type of design preparation and study pattern to deploy.
Conclusion a d report of observations made are the last part of a scientific study which is key as all outcomes of the study should be adequately detailed in an understandable format while also ensuring reproducibility.
Difference between crest and trough
Answer:
The highest surface part of a wave is called the crest, and the lowest part is the trough. The vertical distance between the crest and the trough is the wave height. The horizontal distance between two adjacent crests or troughs is known as the wavelength.
I hope it's helpful!
File Is Attached To The Question
Look at the diagram provided. What would be the mechanical energy at Point #4?
Answer:
18000 J
Explanation:
From the question given above, the following data were obtained:
At point 4:
Mass of cart = 600 Kg
Velocity of cart (v) = 7.745 m/s
Kinetic energy (KE) =?
KE = ½mv²
KE = ½ × 600 × 7.745²
KE = 300 × 7.745²
KE ≈ 18000 J
Therefore, the mechanical energy of the cart at point 4 is 18000 J
13-1 LIVE
2, A rectangulv Container of base socmby 30cm is filled
with water to be depth of 5cm. how much is the pressure exerted
at the base? (take pw= 1000kg /m3 and g=10m/s)
Correct question is;
2, A rectangular Container of base 50 cm by 30cm is filled with water to be depth of 5cm. how much is the pressure exerted at the base? (take pw= 1000kg /m3 and g=10m/s)
Answer:
P = 500 N/m²
Explanation:
Pressure exerted at the base is the hydrostatic pressure and it is given by the formula;
P = ρgh
Where;
ρ is density = 1000 kg/m³
g = 10 m/s²
h is depth = 5 cm = 0.05 m
Thus;
P = 1000 × 10 × 0.05
P = 500 N/m²
what is the unit scientist use to measure energy?
answer:
scientists use a measurement called BTU to measure energy
If the voltage of a circuit is 6V, and the power is 4W, what is its resistance?
Answer:
9 ohms
Explanation:
P = V²/R
R = v²/p = 6²/4 = 36/4 = 9 ohms.
The resistance is 9 Ohm.
To find the resistance, we need to know about the power in term of resistance and voltage.
What is the value of power in terms of resistance and voltage?We know that power=work/timeElectrostatics work is given as voltage ×charge. So, power=(Voltage×charge)/timeAgain, charge/time is given as current. So, power = Voltage×currentFrom Ohm's law, we know that current=voltage/resistance. So, power= voltage ²/resistance. What is the resistance, if power is 4W and voltage is 6V?Resistance in term of power and voltage is given as Resistance= voltage ²/powerSo, resistance=6²/4=36/4= 9 OhmThus, we can conclude that the resistance is 9 Ohm.
Learn more about the electrical power here:
brainly.com/question/16054310
#SPJ2
A vehicle of mass 3200kg moving with a velocity of 10m/s increases it's velocity to 20m/s in 5 sec. calculate the magnitude of the force exerted on the engine
Answer:
xitxutdtidtiittieitetdtdt
Answer:
Please find the attached file
Explanation:
Light described as what two things?
Answer:modeled as an electromagnetic wave. In this model, a changing electric field creates a changing magnetic field.
Explanation:
Which situation involves kinetic energy being transformed into sound energy?
Answer:
c
Explanation:
this is because you move ( kinetic energy) your hands and clap the other person's hand, you will definitely hear sound right.
Answer:
c
Explanation:
When they move their hands together their energy transforms to sound energy.
Two examples of energy transformations are shown. At left, a floor lamp plugged into a wall electrical outlet. At right, a wood fire. The energy transformations are similar because they both involve transformations that begin with chemical energy. begin with electrical energy. result in radiant energy. result in mechanical energy.
Answer: C, result in radiant energy
Explanation:
Answer:
The answer is C; result in radiant energy.
Explanation:
Just took the test and got it right ;)
