What capital letter that has more than two right angles.​

Answer:

There are three methods used to solve systems of equations: graphing, substitution, and elimination.

Step-by-step explanation:

The mover is communicating that the weight of the table and 4 chairs combined, represented as t+4C, is greater than or equal to 100 pounds.

The expression t+4C represents the total weight of the table and 4 chairs. The mover's invoice states that this total weight is greater than or equal to 100 pounds, which means that the combined weight of the table and chairs is at least 100 pounds. Therefore, the correct answer is D, "The table and 4 chairs weigh at least 100 pounds."

To solve this mathematically, we can use algebraic inequalities. The inequality t+4C >_ 100 can be rearranged as t >_ 100-4C. This means that the weight of the table t must be greater than or equal to 100 minus four times the weight of a single chair C.

If each chair weighs less than 25 pounds, then the total weight of the table and 4 chairs combined will be at least 100 pounds. So D is correct answer.

For more questions like Expression click the link below:

https://brainly.com/question/29583350

#SPJ11

Chelsey is correct.

The equation of the tangent line is y = 8

Perimeter of BCDE is 28.28

Chelsey is correct. The tangent line at a point on a circle is perpendicular to the radius at that point.

Therefore, it has the same slope as the radius at the point of tangency.

To find the equation of the tangent line at point B(7,8), find the slope of the radius at B.

The radius at B passes through the center of the circle (7,3) and B(7,8), so its slope is:

m = (8 - 3) / (7 - 7) = undefined

This is because the radius is a vertical line. The slope of the tangent line at B is the negative reciprocal of the slope of the radius at B, which is 0.

The equation of the tangent line is:

y - 8 = 0(x - 7)

y = 8

Part B: To find the perimeter of BCDE, we need to find the length of one of its sides and then multiply by 4. Since the square is inscribed in the circle, its diagonal is equal to the diameter of the circle, which is 10 (twice the radius).

Therefore, the length of one side of the square is:

s = 10/√(2) ≈ 7.07

The perimeter of BCDE is:

4s = 4(7.07) ≈ 28.28

Find out more on tangent line here: https://brainly.com/question/31133853

#SPJ1

The perimeter of triangle MKN is 34 units.

Based on the information provided, we have a circle with three points of tangency: A, B, and C. Let's consider the triangle formed by these points: MKN.

We are given that the length of AM is 6 and the length of BK is 4. We need to find the perimeter of triangle MKN.

To find the perimeter, we need to know the lengths of all three sides. However, the length of side AC is not provided.

Without additional information, we cannot determine the lengths of sides MN and KN or calculate the perimeter of triangle MKN.

Therefore, with the given information, we cannot find the perimeter of triangle MKN or provide a numerical answer

Learn more about tangency

brainly.com/question/12035817

#SPJ11

The width of the rectangle is approximately 5.39 meters.

Let's denote the width of the rectangle by x. According to the problem, the length of the rectangle is 4 meters more than the width, which means that the length can be represented as x+4.

The formula for the area of a rectangle is A = length x width. In this case, we know that the area of the rectangle is 77 square meters, so we can set up the following equation:

77 = (x+4)x

Expanding the brackets, we get:

77 = x² + 4x

Rearranging this equation into standard quadratic form, we get:

x² + 4x - 77 = 0

To solve for x, we can use the quadratic formula:

[tex]x = \frac{(-b ± sqrt(b^2 - 4ac))}{ 2a}[/tex]

Plugging in the values for a, b, and c, we get:

[tex]x = \frac{(-4 ± sqrt(4^2 - 4(1)(-77)))}{ 2(1)}[/tex]

Simplifying this expression, we get:

[tex]x = \frac{(-4 ± sqrt(336)} { 2}[/tex]

[tex]x = \frac{(-4 ± 4sqrt(21))}{ 2}[/tex]

x = -2 ± 2[tex]\sqrt{(21)}[/tex]

Since the width of a rectangle cannot be negative, we discard the negative solution and get:

x = -2 ± 2[tex]\sqrt{(21)}[/tex]

Therefore, the width of the rectangle is approximately 5.39 meters (rounded to two decimal places).

To learn more about rectangle refer here:

https://brainly.com/question/29123947

#SPJ11

If each locker is identified by one letter and one digit, the total number of lockers built in the school is 229.

There are 26 letters in the alphabet (A to Z), and if each locker is identified by one letter and one digit, then there are a total of 26 × 10 = 260 possible locker identifications using the letters A to Y and digits 0 to 9.

Out of these, there are 4 digits used to identify the lockers with the letter Z. So, there are 10 − 1 = 9 digits left to use for the remaining lockers, as we cannot use the digit already used for the lockers with the letter Z.

Similarly, there are 25 letters left to use for the remaining lockers, as we cannot use the letter Z.

Therefore, the number of remaining lockers is 9 × 25 = 225. Adding the 4 lockers with the letter Z, the total number of lockers built in the school is 225 + 4 = 229.

To learn more about digits, click here:

https://brainly.com/question/30142622

#SPJ11

The probability of Henry choosing a Milky Way and then a Snickers is 2/27.

1. First, let's find the total number of candy pieces in Henry's candy jar:
3 Snickers + 1 Reese's + 1 Twix + 2 Milky Ways + 2 Skittles Packs = 9 pieces of candy.

2. Next, we'll calculate the probability of choosing a Milky Way on the first pick:
There are 2 Milky Ways and 9 total pieces of candy, so the probability is 2/9.

3. Since Henry puts the candy back, there are still 9 pieces of candy for the second pick. Now, we'll calculate the probability of choosing a Snickers on the second pick:
There are 3 Snickers and 9 total pieces of candy, so the probability is 3/9 (or 1/3).

4. Finally, we'll multiply the probabilities of each individual event to find the probability of both events occurring together (choosing a Milky Way and then a Snickers):
(2/9) * (1/3) = 2/27

So, the probability of Henry choosing a Milky Way and then a Snickers is 2/27.

Learn more about probability,

https://brainly.com/question/25870256

#SPJ11

Answer: 5

Step-by-step explanation:

10 + 7h = 45

-10         -10

     7h = 35

divide by 7 to both sides

        h = 5

the price of one apple after solving the simultaneous equations is $1.45.

Let's denote the price of one apple by "a" and the price of one banana by "b". We can then set up a system of two equations to represent the given information:

4a + 9b = 12.70 (equation 1)
8a + 11b = 17.70 (equation 2)

To solve for the price of one apple, we want to isolate "a" in one of the equations. One way to do this is to multiply equation 1 by 8 and equation 2 by -4, which will allow us to eliminate "b" when we add the two equations together:

(8)(4a + 9b) = (8)(12.70) --> 32a + 72b = 101.60 (equation 3)
(-4)(8a + 11b) = (-4)(17.70) --> -32a - 44b = -70.80 (equation 4)

Adding equations 3 and 4 gives:

28b = 30.80

Solving for "b" yields:

b = 1.10

Substituting this value of "b" into equation 1 gives:

4a + 9(1.10) = 12.70

Solving for "a" yields:

a = 1.45

Therefore, the price of one apple is $1.45.

To learn more about simultaneous equations go to:

https://brainly.com/question/16763389?referrer=searchResults

#SPJ11

The old coordinates are;

W (3, 14)

Y (12, 14)

X (6, 11)

While the new coordinates for the reflected triangle are:

W'' (3, -14)

X'' (6, -11)

Y'' (12, -14).

See the attached image.

A reflection is referred to as a flip in geometry. A reflection is the shape's mirror image. The line of reflection is formed when an image reflects through a line.

A figure is said to mirror another figure when every point in one figure is equidistant from every point in another figure.

Learn more about Reflection:
https://brainly.com/question/29093485
#SPJ1

The only option left is −5°F, which is colder than −3°F and thus could be the temperature on her thermometer this morning.

The temperature on Skylar's thermometer is measured using a scale that indicates the degree of hotness or coldness of the atmosphere. In this case, we know that the temperature on her thermometer last night was −3°F. The negative sign indicates that the temperature was below the freezing point of water.

We are asked to determine what the temperature could be on her thermometer this morning. Since we are told that the temperature is colder than −3°F, we can eliminate 0°F and 2°F as possible options, as they are warmer than −3°F.

Similarly, −1°F is only slightly colder than −3°F, so it is unlikely to be the temperature on Skylar's thermometer this morning. Therefore, the only option left is −5°F, which is colder than −3°F and thus could be the temperature on her thermometer this morning.

It is important to note that temperature can have a significant impact on our daily lives. Extreme cold temperatures can cause frostbite, hypothermia, and other health hazards, while hot temperatures can lead to dehydration, heat exhaustion, and heat stroke. It is important to dress appropriately and take necessary precautions when the temperature is too low or too high.

To know more about temperature, refer to the link below:

https://brainly.com/question/8823320#

#SPJ11

Event A' has a probability of 50% (25% for freshmen + 25% for seniors).

To determine Event A', we need to first identify what Event A represents. Event A is the probability that a student is a sophomore or junior. Since students have equal probabilities of being freshmen, sophomores, juniors, or seniors, the probability of Event A is 50% (25% for sophomores + 25% for juniors).
Event A' is the complement of Event A, which means it includes the other two grade levels not included in Event A, in this case, freshmen and seniors. Therefore, Event A' is the probability that a student is a freshman or a senior. Since students have equal probabilities of being in each grade level, Event A' also has a probability of 50% (25% for freshmen + 25% for seniors).

Learn more about probabilities here, https://brainly.com/question/25870256

#SPJ11

The volume of the given sphere having radius of 4 units is 267.94 units³.

Given the radius of the sphere (r) = 4 units

To find the volume of the given sphere, we have to substitute the radius in the below volume formula of the sphere,

the volume of the sphere = 4/3 * π * r³

the volume of the given sphere = 4/3 * 3.14 * (4)³        

[π  is approximately equal to 3.14]

the volume of the given sphere = 267.94 units³

So from the above analysis, we can conclude that the volume of the sphere having 4 units radius is 267.94 units³.

To know more about volume,

https://brainly.com/question/27710307

#SPJ1

Given question is not having complete information, the complete question is written below:

What is the volume of the sphere having 4 units radius?

The factored form of the equation is 1/2(y - √5)

To factor this expression, we need to look for any common factors that can be pulled out of both terms. We can see that both terms contain a factor of 1/2, so we can factor that out:

1/2(y - 5 1/2)

Now we need to see if there are any further factors that we can find. The term inside the parentheses, y - 5 1/2, cannot be factored any further using real numbers. However, we can write the expression as y - √5, which shows that it involves the square root of 5.

So the final factored form of the expression is:

1/2(y - √5)

This means that if we multiply 1/2 by (y - √5), we get back the original expression 1/2y - 5 1/2.

To know more about equation here

https://brainly.com/question/21835898

#SPJ1

Answer:

18 feet

Step-by-step explanation:

multiply 5 1/3 yards by 3 to find the measurement in feet.

16/3 x 3 = 16

16 + 2 = 18

Helping in the name of Jesus.

The correct option is the first one, and the domain is the set of real numbers except for x = -6.

The inverse will be a function such that when we take the composition we get the identity, then we can write:

[tex]f(g(x)) = \frac{1}{g(x) - 4} - 6 = x[/tex]

We need to solve that for g(x), we will get:

[tex]\frac{1}{g(x) - 4} - 6 = x\\\\\frac{1}{g(x) - 4} = x +6\\\\g(x) - 4 = \frac{1}{x + 6} \\g(x) = \frac{1}{x + 6} + 4[/tex]

That is the inverse function, and notice that if x = -6 the denominator becomes zero, so that value is not in the domain.

Then the correct option is the first one.

Learn more about inverse functions:

https://brainly.com/question/3831584

#SPJ1

a. FA5.6₁₆ = 15x16² + 10x16 + 5 + 6/16 = 4005.375₁₀

b. 725.38₁₀ remains the same in decimal form

c. 3F4.8₁₆ = 3x16² + 15x16 + 4 + 8/16 = 1012.5₁₀

d. 73.25₈ = 7x8 + 3 + 2/8 = 59.3125₁₀

e. FF.F0₁₆ = 15x16 + 15 + 15/16 + 0/256 = 255.9375₁₀

Decimal form is a way of representing numbers using the base 10 number system. In this system, there are 10 digits from 0 to 9 that are used to represent all possible numbers. Each digit in a decimal number has a place value that is determined by its position. The rightmost digit represents units, the next digit to the left represents tens, and so on, with each successive digit representing higher powers of 10.

Learn more about decimal form:

https://brainly.com/question/16361602

#SPJ4

The coordinates of the point on the curve where the tangent line has a slope of 1/2 are (4, 0).

To find the coordinates of the points on the curve x(t) = 3t^2 + 1 and y(t) = t^3 - 1, where the tangent line has a slope of 1/2, follow these steps:

1. Calculate the derivatives of x(t) and y(t) with respect to t:

dx/dt = 6t
dy/dt = 3t^2

2. The slope of the tangent line is given by dy/dx, so calculate dy/dx using the chain rule:

dy/dx = (dy/dt) / (dx/dt) = (3t^2) / (6t) = t/2

3. Set the slope equal to 1/2 and solve for t:

t/2 = 1/2
t = 1

4. Plug the value of t back into the original equations for x(t) and y(t) to find the coordinates of the point:

x(1) = 3(1)^2 + 1 = 4
y(1) = (1)^3 - 1 = 0

The coordinates of the point on the curve where the tangent line has a slope of 1/2 are (4, 0).

To learn more about coordinates, refer below:

https://brainly.com/question/16634867

#SPJ11

Answer:

First Problem:

Transformation: Reflection across the x-axis, shift 2 units rightward

Equation: g(x)=-5^(x-2)

Second Problem:

Transformation: Reflection across the y-axis, shift 4 units upward

Equation: 10^-x+4

Step-by-step explanation:

Imagine folding a piece of paper and using the x or y axis as the crease marks. By folding them and comparing them, we can find out whether it is either the x-axis, y-axis, or both-axis. Then, we move the graph, to match the position in the second picture.

As for equations, exponential functions have the parent function of y=b^(x+c)+h. By plugging in any points given, let's say (1,5), we can see that 5=b^1 and simplifying shows 5=b. Therefore, the function is y=5^x. Using that first equation, we transform it. If over the x-axis, convert y=b^x to y=-b^x. If over the y-axis, convert y=b^x to y=b^-x. For horizontal shift, if going rightward, it is x-c. If going leftward, it is x+c. For vertical shift, if going up, b^x+h. If going down, b^x-h.

If unsure, plug-in points to see if your answer checks out with the equation :)

To build a ramp with a 15-inch rise for rolling gym equipment into your school, following ADA specifications, we should create a ramp with a run of 180 inches to maintain a 1:12 slope.

For building a ramp with a rise of 15 inches for rolling gym equipment into your school, following ADA specifications. Let's use these terms in our step-by-step explanation:

1. ADA specifications: The Americans with Disabilities Act (ADA) specifies that the slope of a ramp should be no more than 1:12, which means that for every 1 inch of rise, there should be 12 inches of run.

2. Ramp rise: In this case, the rise is 15 inches.

3. Calculate ramp run: To find the ramp run, we can use the ADA specification of 1:12. Multiply the rise (15 inches) by 12.

15 inches x 12 = 180 inches

4. Ramp run: Based on the calculation, the run for the ramp should be 180 inches.

5. Ramp length: To ensure a safe and accessible ramp, follow the ADA specifications and use a ramp length of 180 inches to achieve the 15-inch rise.

To know more about ADA specifications refer to

https://brainly.com/question/30286625

#SPJ11

The function that can be used to find the total area is: (x^2 + 25) sq. ft.

A square is a type of quadrilateral which has an equal length of sides. So then its area can be calculated as;

area of a square = length x length

We have from the question that; a square surface that has a side length of x feet. So that;

area of the square surface = length * length

                                            = x * x

                                            = x^2 square feet

But since the contractor always adds 25 square feet to the area, he buys extra paint, then the function required is:

total area = (x^2 + 25) sq. ft.

The function is (x^2 + 25) sq. ft.

Learn more about the area of a square at https://brainly.com/question/24487155

#SPJ1

Answer:

----------------------

In order to find the total area, we need to consider both the area of the square surface and the extra paint he always adds.

Find the area of the square surface:

Add the extra 25 square feet of paint:

Combining these steps, the function is:

The limit of (sin(9x))/x as x approaches 0 is equal to 9.

To evaluate this limit analytically, we can use L'Hopital's Rule.

Taking the derivative of the numerator and denominator with respect to x, we get:lim (sin(9x))/x = lim (9cos(9x))/1as x approaches 0.

Substituting x = 0, we get:lim (sin(9x))/x = 9cos(0)/1 = 9Therefore, the limit of (sin(9x))/x as x approaches 0 is equal to 9.

We know already how to apply or make the procedures mathematically talking so this short program will eventually help you how to find logic.

For more similar questions on topic limit analytically

brainly.com/question/13641622

#SPJ11

Step-by-step explanation:

there is no explanation about x so wierd

The possible propagated error in computing the area of the square is between 19/32 and 21/32 square inches.

(a) Let A be the area of the square tile. The differential of A with respect to the side length x is dA/dx = 2x.

dA ≈ (dA/dx)dx

At the lower end of the possible range for x, we have:

x = 9 31/32 inches

dx = 1/32 inch

dA = (2x)(dx) = (2(9 31/32))(1/32) = 19/32 square inches

At the upper end of the possible range for x, we have:

x = 10 1/32 inches

dx = 1/32 inch

dA = (2x)(dx) = (2(10 1/32))(1/32) = 21/32 square inches

Therefore, the possible propagated error in computing the area of the square is between 19/32 and 21/32 square inches.

(b) The percent error in computing the area of the square is given by:

(percent error) = (error / actual value) x 100

(percent error) = [(21/32 - 100) / 100] x 100% = -79/1600 x 100% ≈ -4.94%.

Learn more about propagated error

brainly.com/question/30765830

#SPJ11

Answer:

Obese

Step by Step Explanation:

looked it up :)

Ms. Brock can now fill up to 88 spray bottles with her preparation.

It is calculated that:

hence we have that

1 gallon = 128 fluid ounces

1 pint = 16 fluid ounces  

cross multiplying

16 fluid ounces x 1 gallon = 128 fluid ounces x 1 pint

1 gallon = (128 fluid ounces x 1 pint) / 16 fluid ounces

1 gallon = 8 pints

Consequently, there are 8 pints in one full gallon.

Ms. Brock blended 1 gallon of cleaner with 10 gallons of water, thus resulting in 11 gallons.

To figure out the total number of pints Ms. Brock has in her solution, we must multiply 11 gallons by 8 pints/gallon:

11 gallons x 8 pints/gallon = 88 pints

Learn more about word problem at

https://brainly.com/question/21405634

#SPJ1