Answer:
Collision can be classified as either elastic or inelastic. The main difference between elastic and inelastic collisions is that, in elastic collisions, the total kinetic energy of the colliding objects before the collision is equal to the their total kinetic energy after the collision. In inelastic collisions, the total kinetic energy of the objects after the collision is less than the total kinetic energy of the objects before the collision.
GIVE. BRAINLIEST
PLEASE
What is the highest order dark fringe, , that is found in the diffraction pattern for light that has a wavelength of 575 nm and is incident on a single slit that is 1410 nm wide?
Answer:
The highest order dark fringe is 2
Explanation:
From the question we are told that
The wavelength is [tex]\lambda = 575 \ nm = 575 *10^{-9} \ m[/tex]
The width is of the slit is [tex]d = 1410 nm = 1410 *10^{-9} \ m[/tex]
Generally the highest order dark fringe is mathematically represented as
[tex]m = \frac{w}{\lambda }[/tex]
=> [tex]m = \frac{ 1410 *10^{-9}}{ 575 *10^{-9} }[/tex]
=> [tex]m =2[/tex]
A 14000 kg tank moving at 9 m/s is brought to a halt in 2.5 s by a reinforced-steel tank barrier. What magnitude of the impulse was imparted to the tank
Answer
The value is [tex]I = 126000 \ kg \cdot m/s[/tex]
Explanation
From the question we are told that
The mass of the tank is [tex]m = 14000 \ kg[/tex]
The speed is [tex]u = 9 \ m/s[/tex]
The duration taken to bring it to a stop is [tex]\Delta t = 2.5 \ s[/tex]
Generally the impulse that was imparted on the tank is mathematically represented as
[tex]I = m (u - v )[/tex]
Generally the v is the final velocity of the tank which is v = 0 m/s , given that it was brought to rest
So
[tex]I = 14000 (9 - 0 )[/tex]
=> [tex]I = 126000 \ kg \cdot m/s[/tex]
Impulse is defined as the mass and change of velocity. The magnitude of the impulse was imparted to the tank 126000 Kg m/sec.
What is impulse?
The force which acts on the body for a short interval of time is known as the impulsive force. The impulsive force is defined as the product of force and the duration for the force is applied.
It is denoted by I. Its unit is kgm/sec.
m is the mass of the tank = 14000 kg
v is the final speed = 9 m/s
u is the initial speed =0
t is the time interval = 2.5 sec.
The formula for impulse is given as ;
[tex]\rm I=\frac{m(v-u)}{t} \times t \\\\ \rm I=m(v-u) \\\\ \rm I=14000(9-0)\\\\\rm I= 126000 \;kgm/sec[/tex]
Hence the magnitude of the impulse was imparted to the tank 126000 Kg m/sec.
To learn more about the impulse refer to the link;
https://brainly.com/question/904448
A boat can travel 2.30 m/s in still water. If the boat points its prow directly across a stream whose current is 1.80 m/s , what is the magnitude of the velocity of the boat relative to the shore?
Answer:
A boat can travel 2.30 m/s in still water. (a) If the boat points its prow directly across a stream whose current is. ... (a) What is the velocity (magnitude and direction) of the boat relative to the shore? ... The boat's velocity with respect to the shore, , is the sum of its velocity with respect to the water
Explanation:
A block, whose mass is 0.500 kg, is attached to a spring with a force constant of 126 N/m. The block rests upon a frictionless, horizontal surface. A block labeled m is attached to the right end of a horizontal spring, and the left end of the spring is attached to a wall. The spring is stretched horizontally such that the block is displaced by a distance A to the right of its equilibrium position. The block is pulled to the right a distance A = 0.120 m from its equilibrium position (the vertical dashed line) and held motionless. The block is then released from rest. (a) At the instant of release, what is the magnitude of the spring force (in N) acting upon the block? N (b) At that very instant, what is the magnitude of the block's acceleration (in m/s2)? m/s2 (c) In what direction does the acceleration vector point at the instant of release?
Answer:
(a) F = 15.12 N
(b) a = 30.24 m/s²
(c) To Left
Explanation:
(a)
The magnitude of the spring force is given by Hooke's Law as follows:
F = kx
where,
F = Spring Force = ?
k = Spring Constant = 126 N/m
x = Displacement = A = 0.12 m
Therefore,
F = (126 N/m)(0.12 m)
F = 15.12 N
(b)
The magnitude of acceleration can be found by comparing the spring force with the unbalanced force formula of Newton's Second Law:
F = ma
where,
F = Spring Force = 15.12 N
m = mass of block = 0.5 kg
a = magnitude of acceleration = ?
15.12 N = 0.5 kg (a)
a = 15.12 N/0.5 kg
a = 30.24 m/s²
(c)
Since, the acceleration is always directed towards mean (equilibrium) position in periodic motion. Therefore, the direction of the acceleration at the time of release will be to left.
insulator allows the electric current to pass through it true or false please anyone please please please
2 examples of where ground water comes from
Answer: Example of ground water
Explanation: Groundwater is part of the hydrologic cycle, originating when part of the precipitation that falls on the Earth's surface sinks (infiltrates) through the soil and percolates (seeps) downward to become groundwater.
Bru challenge with the physics.
Answer:
WHATATATATTAT
Explanation:
Jaeda designs two electromagnets of different strengths. The first electromagnet has an insulated copper wire wrapped around an iron nail many times before it is connected to a battery. The second electromagnet has its insulated copper wire wrapped around a similar nail a fewer number of times before it is connected to two smaller batteries as shown in the image. Jaeda tries to determine which electromagnet is stronger by bringing each near a bowl containing eight metal paper clips. She observes that both electromagnets attract all eight of the paper clips.
How can Jaeda demonstrate that each electromagnet has a different strength
A. Place a metal paper clip on a table and slowly bring each electromagnet closer to the paper clip to see which can attract the paper clip from a greater distance.
B. Determine which electromagnet has its copper wire wrapped around its iron nail a greater number of times.
C. Add plastic paper clips to the bowl and check which electromagnet can attract both kinds of paper clips.
D. Reduce the number of paper clips in the bowl and find which electromagnet attracts more paper clips.
Answer:A
Explanation:
Place a metal paper clip
Please help! ASAP. I'm going to have a panic attack.
Answer:
dont die bro
Explanation:
how can we show the magnetic force of a magnet illustrate with an example
Answer:
take some sharp mixture of iron spread it from up the magnet you will see the magnetic field of magnet
The CERN particle accelerator is circular with a circumference of 7.0 km.
Required:
a. What is the acceleration of the protons (m=1.67×10^−27kg) that move around the accelerator at of the speed of light? (The speed of light is v=3.00×10^8m/s.)
b. What is the force on the protons?
Answer:
Explanation:
a) centripetal acceleration is the acceleration of a body in a circular path. It is expressed as;
a = mv²/r
m is the mass of proton = 1.67×10^−27kg
v is the velocity = 3.00×10^8m/s
r is the radius
Since C = 2πr
7000m = 2πr
r = 7000/2π
r = 1114.08m
Substitute
a = 1.67×10^−27 (3.00×10^8)²/1114.08
a = 1.67×10^−27 * 9×10^16/1114.08
a = 15.03*10^-11/1114.08
a = 0.001346*10^-11
a = 1.346*10^-14m/s²
b) Force on the proton = mass * acceleration
Force = 1.67×10^−27kg * 1.346*10^-14
Force = 2.246*10^-41N
hence the force on the proton is 2.246*10^-41N
Suppose an electric eel develops a potential difference of 450 V driving 0.80 A during a 1.0 ms pulse. What is the power output of the eel during this pulse
Answer:
The power output is [tex]P = 360 \ W[/tex]
Explanation:
From the question we are told that
The potential difference developed is [tex]V = 450 V[/tex]
The current is [tex]I = 0.80 \ A[/tex]
The duration of the pulse is [tex]\Delta t = 1.0 ms = 1,0 *10^{-3} \ s[/tex]
Generally the power output of the eel during the pulse is mathematically represented as
[tex]P = V * I[/tex]
=> [tex]P = 450 * 0.80[/tex]
=> [tex]P = 360 \ W[/tex]
You are working out on a rowing machine. Each time you pull the rowing bar (which simulates the oars) toward you, it moves a distance of 1.1 m in a time of 1.3 s. The readout on the display indicates that the average power you are producing is 92 W. What is the magnitude of the force that you exert on the handle?
Answer:
The magnitude of force exerted on the handle is 108.73 N
Explanation:
To determine the magnitude of force exerted, we will use the formula relating Power and Force.
Power is the rate at which work is done. Power can be calculated from the formula
Power = Work / Time
But, Work = Force × Distance
Hence,
Power is given by the formula
[tex]P = \frac{F \times s}{t}[/tex]
Where P is the Power
F is the force
s is the distance
and t is the time
From [tex]P = \frac{F \times s}{t}[/tex],
Then we can write that
[tex]F = \frac{P \times t}{s}[/tex]
From the question,
Distance, s = 1.1 m
Time, t = 1.3 s
Power, P = 92 W
Putting these values into the formula, we get
[tex]F = \frac{92 \times 1.3}{1.1}[/tex]
[tex]F = \frac{119.6}{1.1}[/tex]
[tex]F = 108.73N[/tex]
Hence, the magnitude of force exerted on the handle is 108.73 N.
You are a world-famous physicist-lawyer defending a client who has been charged with murder. It is alleged
that your client, Mr. Lawton, shot the victim, Mr. Cray. The detective who investigated the scene of the
crime, Mr. Dibny, found a second bullet, from a shot that missed Mr. Cray, that had embedded itself into a
chair. You arise to cross-examine the detective.
You: In what type of chair did you find the bullet?
Dinby: A wooden chair.
You: How massive was this chair?
Dinby: It had a mass of 20 kg.
You: How did the chair respond to being struck with a bullet?
Dinby: It slid across the floor.
You: How far?
Dinby: Three centimeters. The slide marks on the dusty floor are quite distinct.
You: What kind of floor was it?
Dinby: A wood floor.
You: What was the mass of the bullet you retrieved from the chair?
Dinby: Its mass was 10 g.
You: Have you tested the gun you found in Mr. Lawton's possession?
Dinby: I have.
You: What is the muzzle velocity of bullets fired from that gun?
Dinby: The muzzle velocity is 450 m/s.
With only slight hesitation, you turn confidently to the jury and proclaim, "My client's gun did not fire those
shots!"
(a) How are you going to convince the jury and judge?
(b) Choose one part of your solution and perform a sense-making analysis. Clearly state which sensemaking analysis you’ve chosen and why.
Answer:
It was not fired from the client's gun because the chair slid only 3 centimeters . If it had been fired from the client's gun the chair would slid 25.82 centimeters.
Explanation:
According to the law of conservation of momentum the momentum of the system before collision must be equal to the momentum of the system after the collision.
M1u1= m2u2
Let M1 = mass of the chair = 20kg
m2= mass of the bullet= 10g= 0.001kg
u1= velocity of the chair before collision = zero m/s
u2 = velocity of the bullet before collision = zero m/s
v1= velocity of the chair after collision = ? m/s
v2 = velocity of the bullet after collision = 450 m/s
After collision their velocities change from u1 to v1 and u2 to v2 so
M1v1= m2v2
v1= m2v2/M1
v1= 0.01 *450/ 20= 0.225 m/s
Now according to the law of conservation of energy the energy of the system before collision must be equal to the energy of the system after the collision.
The energy of the chair after the bullet is hit is
KE of the chair + KE of the bullet= 1/2 (M)(v1)²+ 1/2 m(v2)²=
1/2 ( 20) (0.225 )² + 1/2 (0.01) (450)²
= 0.50625 + 1012.5= 1013.00625 Joules
Frictional force = Coefficient of kinetic force of wood on wood ( M+m) g
= 0.2* ( 20.01) 9.8= 39.2196 N
Work done by friction = frictional force * distance
If law of conservation of energy is applied the KE must be equal to the work done
KE = W
W= f*d
KE= F*d
d = KE/f= 1013.00625/ 39.2196= 25.82 cm
The chair did not move 25.82 cm .
It only moved 3 centimeter.
Hence the bullet fired was not from the client's gun.
An inventor claims to have invented a heat engine that receives 750kJ of heat from a source at 400K and produces 250kJ of net work while rejecting the waste heat to a sink at 300K. Is this a reasonable claim
Answer:
the claim is not valid or reasonable.
Explanation:
In order to test the claim we will find the maximum and actual efficiencies. maximum efficiency of a heat engine can be found as:
η(max) = 1 - T₁/T₂
where,
η(max) = maximum efficiency = ?
T₁ = Sink Temperature = 300 K
T₂ = Source Temperature = 400 K
Therefore,
η(max) = 1 - 300 K/400 K
η(max) = 0.25 = 25%
Now, we calculate the actual frequency of the engine:
η = W/Q
where,
W = Net Work = 250 KJ
Q = Heat Received = 750 KJ
Therefore,
η = 250 KJ/750 KJ
η = 0.333 = 33.3 %
η > η(max)
The actual efficiency of a heat engine can never be greater than its Carnot efficiency or the maximum efficiency.
Therefore, the claim is not valid or reasonable.
.
An oatmeal cookie is dropped on the floor. Is this an inelastic collision?
Answer:
It is not inelastic because the cookie and floor do not move away together as a unit.
Explanation:
I'll give brainliest if you give me a good awnser. :)
A football player kicks a ball with a force of 50 N. Find the impulse on the ball if his foot stays in contact with the football for 0.01 second.
Answer:
0.5
Explanation:
a steel is 40cm long at 20c.the coefficient of linear expansivity for steel is 0.000012.find the increase in length at 70C
Answer:
janakajnakanabjjiaj yav good day for you to everyone else to do with my family is it just doesn't want me and I am
A 10.0 kg mass is attached to the end of a 2.00 m long brass rod, which has a diameter of 1.00 mm and negligible mass. The mass at the end is pulled, stretching the rod slightly, and then released. If the elastic modulus of brass is 9.10 × 1010 N/m2, then the period of the resulting oscillations is
A. 0.175 sec.
B. 0.105 sec.
C. 0.133 sec.
D. 0.145 sec.
E. 0.167 sec.
Answer:
The appropriate alternative is Option B (0.105 sec.).
Explanation:
The given values are:
Elastic modulus,
Y = 9.10 × 10¹⁰ N/m²
Mass,
m = 10.0 kg
Length of rod,
l = 2.00 m
Diameter,
d = 1.00 mm
Now,
⇒ [tex]Keq=\frac{AY}{l}= \frac{\pi D^2 Y}{4l}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{\pi \times 10^{-6}\times 9.1\times 10^{10}}{4\times 2}[/tex]
⇒ [tex]=3.574\times 10^4[/tex]
The time period will be:
⇒ [tex]T=2\pi \sqrt{\frac{m}{Keq} }[/tex]
On substituting the above values, we get
⇒ [tex]=2\pi \sqrt{\frac{10}{3.574\times 10^4}}[/tex]
⇒ [tex]=0.105 \ seconds[/tex]
The time period resulting oscillations will be 0.1005 seconds.
What is the time period of oscillation?The period is the amount of time it takes for a particle to perform one full oscillation. T is the symbol for it. Taking the reciprocal of the frequency yields the frequency of the oscillation.
The given data in the problem is;
[tex]\rm \gamma[/tex] is the elastic modulus=9.10 × 10¹⁰ N/m²
m is the mass= 10.0 kg
l is the length of brass rod= 2.00 m
d is the diameter of 1.00 mm
The value of the equivalent stiffness will be;
[tex]\rm K_{eq}= \frac{AY}{l}\\\\ \rm K_{eq}= = \frac{\pi d^2 Y}{4l} \\\\ \rm K_{eq}=\frac{3.14 \times 10^{-6}\times 9.1 \times 10^{10} }{4\times 2 } \\\\ \rm K_{eq}= 3.574 \times 10^4[/tex]
The time period of the oscillation is given by;
[tex]\rm T = 2 \pi \sqrt{\frac{m}{k_{eq}} } \\\\ \rm T = 2 \times 3.14 \sqrt{\frac{10}{3.574 \times 10^4}[/tex]
[tex]\rm T = 0.105 \ sec[/tex]
Hence the time period resulting oscillations will be 0.1005 seconds.
To learn more about the time period of oscillation refer to the link;
https://brainly.com/question/20070798
a (n) net is the overall force on a object
Answer:
net force
Explanation:
The net force is the vector sum of all the forces acting on an object.
what is the mass of an object that is accelerating at 15 m/s when a force of 2000N is exerted
Answer:
133.33 kgExplanation:
The mass of an object can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question we have
[tex]m = \frac{2000}{15} = \frac{400}{3} \\ = 133.3333[/tex]
We have the final answer as
133.33 kgHope this helps you
Select all that apply. The spectrum of Star Y is compared to a reference hydrogen spectrum. What can be concluded about Star Y? Reference (normal) Hydrogen Spectrum Star Y I 500 550 600 650 700 750 400 450 9200 OdyssepWare, Ing. Star Y is showing radial motion Star Y is moving away from the Earth Star Y is moving toward the Earth Star Y is showing transverse motion
Answer:
Star Y is showing radial motion
Star Y is moving toward the Earth
Explanation:
Just answered this question on a quiz and got it right.
Star Y is showing radial motion
Star Y is moving towards earth.
What is a spectrum ?Spectrum is defined as the arrangement of radiations emitted by atoms or molecules based on their characteristic wavelength and frequency.
Here,
The spectrum of the star Y is given and is compared to a reference hydrogen spectrum. The range of wavelengths of the star is given. The spectrum of the star shows that the wavelengths are shifted such that from longer wavelengths to shorter wavelength. This phenomenon of shift in wavelengths from higher to lower is known as blue shift. The star shows blue shift that means shifted to shorter wavelength or it can be said as shifted from lower frequency to higher frequency. As a result, it can be concluded that the star Y is moving towards the earth which implies Star Y is showing radial motion.
Hence,
The star Y is showing radial motion.
Star Y is moving towards the earth.
To learn more about spectrum, click:
https://brainly.com/question/6562844
#SPJ7
An arrow in a bow has 357 J of elastic potential energy How much Winette enere
Will the arrow have after it has been shot assuming there is no sir restoran
Answer:
357 J
Explanation:
The elastic potential energy of arrow in the stretched bow is 357 J.
The kinetic energy of the arrow after it has been shot is given by half of the product of the arrow's mass and velocity of the arrow.
Here there are no other forms of energy at play here. Only potential and kinetic energy.
As we know that in any system the energy is conserved accordingly the elastic potential energy of the arrow will be equal to the kinetic energy of the bow after it is released i.e., 357 J.
PLS HURRY!!!! 15 PTS!!! The pictures represent three different states of matter.
Which order of pictures places molecules with the most
amount of motion to the least amount of motion?
O X Y Z
O ZYX
O Y Z
O Y - X - Z
g A 320-g air track cart is traveling at 1.25 m/s and a 270-g cart traveling in the opposite direction at 1.33 m/s. What is the speed of the center of mass of the two carts
Answer:
1.287m/s
Explanation:
Using the law of conservation of mass expressed as;
m1u1+m2u2 = (m1+m2)v
m1 and m2 are the masses of the objects
u1 and u2 are the velocities
v is the speed of the center of mas of the two carts
Given
m1 = 320g = 0.32kg
u1 = 1.25m/s
m2 = 270g = 0.27kg
u2 = 1.33m/s
Substitute this value into the formula and get v;
0.32(1.25)+0.27(1.33) = (0.32+0.27)v
0.4+0.3591 = 0.59v
0.7591 = 0.59v
v = 0.7591/0.59
v = 1.287m/s
hence the speed of the center of mass of the two carts is 1.287m/s
A person who weighs 670 N steps onto a spring scale in the bath- room, and the spring compresses by 0.79 cm. (a) What is the spring con- stant
Answer:
The spring constant is 84,810.13 N/m
Explanation:
Given;
applied force on the spring scale, f = 670 N
extention of the spring, x = 0.79 cm = 0.0079 m
Apply Hook's law to determine the spring constant;
f = kx
where;
f is the applied force
k is the spring constant
x is the is the extension
k = f / x
k = 670 / 0.0079
k = 84,810.13 N/m
Therefore, the spring constant is 84,810.13 N/m
How is mass-energy equivalence demonstrated in the Sun?
Hydrogen nuclei fuse to form a larger nucleus, and a small amount of mass is converted into energy.
Hydrogen nuclei fuse to form a larger nucleus by absorbing a large amount of energy and converting it into a small amount of mass.
Hydrogen nuclei form from smaller nuclei, and a small amount of mass is converted into energy.
Hydrogen nuclei form from smaller nuclei by absorbing a large amount of energy and converting it into a small amount of mass.
Answer:
Explanation:
Hydrogen nuclei fuse to form a larger nucleus, and a small amount of mass is converted into energy.
The mass difference between a helium nucleus and four hydrogen nuclei is 0.7%; this mass difference is transformed into energy during the fusion process. Each mole of He42 created as a result of this reaction generates around 3.6 1011 kJ of energy. Thus, option A is correct.
What Hydrogen nuclei fuse to form a larger nucleus?Hydrogen is exhausted during the fusion of hydrogen nuclei, which creates helium and energy. The process's fuel is hydrogen. The star's core condenses and heats up further as the hydrogen is consumed.
For instance, 0.645% of the mass is lost during the fusion of two hydrogen atoms to create helium in the form of electromagnetic radiation or the kinetic energy of an alpha particle. Even those of the lightest element, hydrogen, require a significant amount of energy to get their nuclei to fuse.
Due to this, heavier and heavier elements are encouraged to fuse together, eventually creating all the elements up to iron.
Therefore, Hydrogen nuclei fuse to form a larger nucleus, and a small amount of mass is converted into energy.
Learn more about Hydrogen nuclei here:
https://brainly.com/question/4185579
#SPJ2
it opens or close the circuit
Answer:
The person above me is right i had a test a couple of days ago and thats kinda what u put and got it right!
Help me with this please !!
Pt 1_It would be harder to do experiments on or near jupiter for many reasons ! One being that jupiters top layers are known to be gas. However if we could hover over Jupiter and test its gravity, describe or sketch the shape of the position vs time graph for a dropped object.
PT2_ The acceleration due to gravity near Jupiter is 25.95m/s. If a hammer were dropped, how fast wouldit be going after falling 20.0 meters. Show your work !
Answer:
he is right he Is
Explanation:
step by step explanation
A wheel accelerates with a constant angular acceleration of 4.5 rad/s2. If the initial angular velocity is 1.0 rad/s, what is the angle the wheel rotates through in 2.0 s?
Answer:
The angle which the wheel rotates through in 2 seconds is [tex]\theta =11 \ radians[/tex]
Explanation:
From the question we are told that
The constant angular acceleration of the wheel is [tex]\alpha = 4.5 rad/s^2[/tex]
The initial angular velocity of the wheel is [tex]w_1 = 1.0 \ rad/s[/tex]
The time duration considered is [tex]t = 2.0 \ s[/tex]
Generally from kinematic equation we have that
[tex]\theta = w_1 t +\frac{1}{2} \alpha t^2[/tex]
=> [tex]\theta = 1.0 * 2 +\frac{1}{2} * 4.5 * 2^2[/tex]
=> [tex]\theta =11 \ radians[/tex]
