Using fiscal policy, will be including automatic stabilizers, to stabilize the output over a business cycle is not consistent with the classical economic theory.
Classical economists believe that the economy is self-correcting and will naturally return to full employment in the long run. According to this theory, any intervention in the form of fiscal or monetary policy to stabilize output in the short run can only create temporary effects and may cause long-term harm.
In contrast, Keynesian economics, which developed in response to the Great Depression of the 1930s, advocates for the use of fiscal policy to stabilize output over the business cycle. Keynesian economists argue that government intervention can help to smooth out fluctuations in output and employment by increasing government spending during recessions and reducing it during expansions.
Therefore, using fiscal policy, including automatic stabilizers, to stabilize output over a business cycle is not consistent with classical economic theory, but it is consistent with Keynesian economic theory.
To know more about fiscal policy here
https://brainly.com/question/27250647
#SPJ4
Question 1
Statement 1. A owes B, who assigns his credit to C. A, without knowing of the assignment, pays B. A’s obligation is extinguished.
Statement 2. The assignment of a credit includes all the accessory rights, such as a guaranty, mortgage, pledge or preference.
A) No. 1 is true; No. 2 is false.
B) Both are true.
C) No. 1 is false; No. 2 is true.
D) Both are false.
The correct answer regarding the credit and assignment is:
B) Both are true.
Statement 1 is true because if A owes B and B assigns his credit to C, but A is not aware of the assignment and pays B, A's obligation is extinguished. This is because A has fulfilled their duty to pay the debt without knowledge of the assignment.
Statement 2 is also true because when a credit is assigned, all accessory rights, such as a guaranty, mortgage, pledge, or preference, are included in the assignment. This means that the person to whom the credit is assigned also gains these rights along with the credit.
To learn more about "credit", visit: https://brainly.com/question/28800758
#SPJ11
Internet retailers serve a larger geographic area with comparably smaller infrastructure and staff. This fact suggests that internet businesses are more _____.
Internet businesses are more scalable than traditional brick-and-mortar businesses, as they can serve a larger geographic area with relatively smaller infrastructure and staff.
This scalability is due to the unique characteristics of the internet, which allows businesses to reach a broader customer base while keeping overhead costs low. Internet retailers can offer their products and services 24/7 without the constraints of physical store hours or location, resulting in increased revenue and profitability.
They can also easily expand their reach through digital marketing and social media, providing them with a wider customer base. The ability to reach a larger audience with fewer resources makes internet businesses more efficient and cost-effective, which ultimately contributes to their competitive advantage.
Additionally, internet businesses can adapt quickly to changing market conditions, thanks to the ease and speed of implementing new strategies and technologies.
To know more about brick-and-mortar refer to-
https://brainly.com/question/13771778
#SPJ11
Melanie is the sole stockholder of Machine Inc. , an S corporation. Her basis in the stock as of the end of year 4 is $43,400. During year 5, Machine reported a loss of $19,000. During year 5, Melanie received a distribution of $38,000 from Machine and loaned $11,000 directly to Machine. Assuming that this is not a passive activity, what is Melanie's deductible loss for year 5?
Melanie's deductible loss for year 5 is $16,400.
As Melanie is the sole stockholder of Machine Inc., her basis in the stock is a crucial factor in calculating her deductible loss for year 5. We are given that her basis in the stock at the end of year 4 was $43,400.
During year 5, Machine reported a loss of $19,000, which would normally reduce Melanie's basis in the stock. However, we are not provided with information about any other transactions or events that may have affected her basis during the year.
Melanie received a distribution of $38,000 from Machine during year 5, which reduces her basis in the stock. Her basis is reduced by the distribution amount ($38,000) minus any portion of the distribution that is a tax-free return of capital, which we are not given.
Additionally, Melanie loaned $11,000 directly to Machine during year 5, which increases her basis in the stock.
To calculate Melanie's deductible loss for year 5, we need to determine her adjusted basis in the stock at the end of the year. This is calculated as her basis at the end of year 4 plus any additional contributions (such as the loan) and minus any distributions.
Adjusted Basis = Beginning Basis + Additional Contributions - Distributions
Adjusted Basis = $43,400 + $11,000 - $38,000 = $16,400
Since Machine reported a loss of $19,000 during year 5, and Melanie's adjusted basis is less than the distribution she received, her deductible loss is limited to her adjusted basis in the stock. Therefore, her deductible loss for year 5 is $16,400.
To learn more about deductible loss refer here:
https://brainly.com/question/31060041
#SPJ11
7. If the total output of a country (GDP) in a given year is 100 million US dollar and the lost part of capital goods in generating this national output is 9. 5 million US dollar, then find
A) the net domestic product (NDP) of the country in that particular year.
The net domestic product (NDP) of the country in that particular year is 90.5 million US dollars.
The net domestic product (NDP) of a country is the total output (GDP) minus the depreciation or lost part of capital goods used to generate that output. In this scenario, the GDP of the country is 100 million US dollars, but the lost part of capital goods used in generating this national output is 9.5 million US dollars. Therefore, the NDP of the country in that particular year can be calculated by subtracting the lost part of capital goods from the GDP.
NDP = GDP - Lost part of capital goods
NDP = 100 million US dollars - 9.5 million US dollars
NDP = 90.5 million US dollars
Therefore, the net domestic product (NDP) of the country in that particular year is 90.5 million US dollars. This figure represents the actual value of goods and services produced by the country, after accounting for the wear and tear or depreciation of capital goods used in the production process. It is an important indicator of a country's economic growth and development, and is used to measure the standard of living of its citizens.
For more about net domestic product:
https://brainly.com/question/9113266
#SPJ11
you want to buy a new sports coupe for $84,500, and the finance office at the dealership has quoted you an apr of 4.7 percent for a 60-month loan to buy the car. what will your monthly payments be? what is the effective annual rate on this loan? excel
The effective annual rate on this loan will be 4.85%.
Monthly payment = -$1,582.87 (using Excel PMT function with rate=4.7%/12, nper=60, pv=84500, fv=0)
Effective annual rate = 4.85% (using Excel EFFECT function with nominal_rate=4.7%, npery=12)
The monthly payment for a 60-month loan at an APR of 4.7% to buy a sports coupe for $84,500 is $1,582.87. This can be calculated using the Excel PMT function. The negative sign indicates that the payment is a cash outflow.
The effective annual rate on this loan is 4.85%, which can be calculated using the Excel EFFECT function. The effective annual rate takes into account the compounding of interest over the course of a year, and is therefore higher than the stated APR of 4.7%. This means that the borrower will pay slightly more in interest over the life of the loan than they would if the interest rate were only 4.7%. It is important to consider the effective annual rate when comparing loan offers from different lenders, as it provides a more accurate picture of the true cost of borrowing.
To learn more about annual rate, here
https://brainly.com/question/31355139
#SPJ4
the management contract between a hotel management team in a hotel and the hotel ownership group can have automatic successor language leading to?
A management company is chosen by the owner of the hotel real estate and business to run the hotel business on their behalf under the terms of a hotel management contract.
Some management companies also own their own brands, in which case the hotel would be run under that brand. An agreement between a management business (or operator) and a property owner is known as a hotel management contract.
Under this agreement, the operator agrees to manage the property by giving direction, oversight, and expertise using predetermined methods and procedures. The most popular types of business ownership include corporations, which can be taxed as either C corporations or S corporations, limited liability partnerships.
To learn more about business, click here.
https://brainly.com/question/15826604
#SPJ4
The question is incomplete complete question is given below
A. Hotel Management Agreement (HMA)
B. Franchise Operators Agreement
C. Business's operations
D. Lifecycle management
open end equity mutual funds commonly keep a smal fraction of total investment in very liqguid money market assets. closed end funds do not maintain such a position in cash equivalents securities. what difference between open end and closed end fund might account for their differing policies
The main difference between open-end and closed-end mutual funds is the way in which they issue and redeem shares.
Open-end funds continuously issue new shares and redeem existing shares, while closed-end funds issue a fixed number of shares that are traded on an exchange like stocks.
Because of this difference in structure, open-end funds need to keep a small fraction of their total investment in liquid money market assets in order to meet redemption requests. In contrast, closed-end funds do not need to worry about redeeming shares, and therefore do not need to maintain a position in cash equivalents.
In addition, closed-end funds typically have more flexibility in their investment strategies, as they are not as concerned with maintaining liquidity to meet redemption requests. They may also have higher management fees, as they are traded on exchanges and require a higher level of management.
Overall, the difference in policies regarding cash equivalents between open-end and closed-end funds is largely a result of their differing structures and investment strategies.
To learn more about funds click on,
https://brainly.com/question/20350725
#SPJ4
What is the difference between mercantilism and capitalism.
Mercantilism and capitalism are two economic systems with fundamental differences in their approach to trade and wealth creation.
Mercantilism was an economic system that was prevalent in Europe during the 16th to the 18th century. It was based on the idea that the wealth and power of a nation depended on its ability to accumulate gold and silver.
This was achieved through the promotion of exports and the discouragement of imports, which led to a favorable balance of trade. Governments played an active role in promoting mercantilism, using tariffs, subsidies, and regulations to control trade and protect domestic industries.
Capitalism, on the other hand, is an economic system that emerged in the 18th century as a response to the limitations of mercantilism. It is based on the idea of free markets, where prices are determined by supply and demand, and private individuals or firms own and control the means of production.
Capitalism encourages competition, innovation, and investment, and relies on market forces to allocate resources and distribute wealth. Unlike mercantilism, capitalism does not rely on government intervention to regulate trade.
To know more about economic systems refer to-
https://brainly.com/question/27630988
#SPJ11
You are brainstorming with your co-founders about your next-year strategy. You are still doing R&D for your product, and you estimate that with probability 80% your product will be a success and bring you $200,000 in revenue. With probability 20% your product will fail and you will not take it to the market. In order to take the product to the market you estimate that you will need to raise $100,000. The interest rates right now are really low at 4%. On the other hand, if you wait until after your R&D is over, the interest rates will be higher and you expect them to be at 10% with probability 40% or at 15% with probability 60%. Remember that banks will always require the whole amount plus interest back regardless of whether your new venture fails or not. You can assume that if you get a loan, you will borrow the $100,000 amount for a whole year regardless of when you decide to take it. Should you get a loan now, before you see the results of the R&D, or should you wait for the results and then get funding depending on the outcome? What is your optimal strategy that maximizes your profit?
(a) Draw the decision tree that helps with finding your optimal strategy. To get full score please provide the diagram and write down the probabilities.
(b) What is your optimal strategy?
(c) What is the smallest success probability (instead of the 80%) that would make getting the loan before you see the results of R&D more profitable?
Based on the decision tree, the optimal strategy is to wait for the results of the R&D before deciding whether to launch the product or not and whether to take a loan or not.
Based on the decision tree, the optimal strategy is to wait for the results of the R&D before deciding whether to launch the product or not and whether to take a loan or not. If the R&D is successful, launch the product and take a loan at the interest rate prevailing at that time. If the R&D fails, don't launch the product and don't take a loan. This strategy maximizes the expected profit.
To find the smallest success probability that would make getting the loan before seeing the results of the R&D more profitable, we can compare the expected profit of the two strategies.
If we get the loan before R&D, the expected profit is:
(0.8 x $200,000) - ($100,000 x 1.04) = $76,800
If we wait for R&D, the expected profit is:
0.8 x (0.4 x $200,000 - $100,000 x 1.04) + 0.2 x $0 = $28,160
Setting these two equal and solving for the success probability gives:
0.8p - 104,000 = 28,160
0.8p = 132,160
p = 165,200 / 200,000 = 0.826
Therefore, the smallest success probability that would make getting the loan before seeing the results of the R&D more profitable is 82.6%. The decision tree attached.
Learn more about the decision tree: brainly.com/question/26675617
#SPJ11
The accounting records of Roland Manufacturing Company include the following information:
Dec. 31 Jan. 1
Work in process inventory $20,000 $50,000
Finished goods inventory 120,000 150,000
Direct materials used 350,000
Direct labor 160,000
Selling expenses 125,000
Manufacturing overhead is applied at a rate of 150% of direct labor cost.
What is the total of the debits to Work in Process Inventory during the year?
The total of the debits to Work in Process Inventory during the year for Roland Manufacturing Company will be $750,000.
To calculate this, we need to consider the direct materials used, direct labor, and manufacturing overhead costs.
Step 1: Calculate the manufacturing overhead cost.
Manufacturing overhead is applied at a rate of 150% of direct labor cost. So, we need to multiply the direct labor cost by 150%:
Manufacturing overhead = Direct labor × 150%
Manufacturing overhead = $160,000 × 1.5
Manufacturing overhead = $240,000
Step 2: Add direct materials used, direct labor, and manufacturing overhead costs.
Total debits to Work in Process Inventory = Direct materials used + Direct labor + Manufacturing overhead
Total debits to Work in Process Inventory = $350,000 + $160,000 + $240,000
Total debits to Work in Process Inventory = $750,000
Thus, the total of the debits to Work in Process Inventory during the year is $750,000.
To know more about work in process, visit https://brainly.com/question/28297174
#SPJ11
The correct answer: the total debits to Work in Process Inventory during the year were $750,000.
Step 1:
Beginning balance of Work in Process Inventory (Jan. 1) = $50,000
Ending balance of Work in Process Inventory (Dec. 31) = $20,000
Therefore, the decrease in Work in Process Inventory during the year is $30,000 (i.e. $50,000 - $20,000).
Step 2:
To determine the total debit to the Work in Process Inventory, we need to consider the costs that were added to it during the year. These costs include Direct Materials, Direct Labor, and Manufacturing Overhead (applied at a rate of 150% of Direct Labor cost).
Step 3:
Total cost added to Work in Process Inventory = Direct Materials + Direct Labor + Manufacturing Overhead
= $350,000 + $160,000 + (150% x $160,000)
= $350,000 + $160,000 + $240,000
= $750,000
For Further Information on Accounting Records and process inventory of a company visit:
https://brainly.com/question/28297174
#SPJ11
Describe an applied behavioral issue that can be addressed by the procedure, include:a statement on whether the procedure can address behavior deficit (i.e., skill deficit) or behavior problem (i.e., behavior excess). -a clear description of a target behavior. -a rationale for selecting the behavior (i.e., why addressing this behavior is important) -a statement predicting the effects of the procedure on the target behavior
An applied behavioral issue that can be addressed by a specific procedure is decreasing disruptive classroom behavior, which is a behavior problem (i.e., behavior excess). The target behavior in this case is the student frequently interrupting the class by talking loudly, getting out of their seat, or engaging in other disruptive actions.
Addressing this behavior is important because disruptive classroom behavior can hinder the learning process for both the individual student and their classmates, negatively impacting academic performance and classroom harmony.
A procedure that can be employed to address this behavior is the implementation of a positive reinforcement system, such as a token economy, where the student earns tokens for displaying appropriate classroom behavior. These tokens can later be exchanged for rewards or privileges. The rationale behind using this procedure is that it encourages the student to replace disruptive behavior with more desirable actions, as they will be motivated by the potential rewards.
It is predicted that, as the positive reinforcement procedure is consistently applied, the disruptive classroom behavior will decrease, and the student will increasingly engage in appropriate behaviors. This change will not only improve the learning environment for all students in the class, but also foster the development of essential social and self-regulation skills for the individual student.
Learn more about behavior here:
https://brainly.com/question/29751317
#SPJ11
Samantha is working through the Client Needs Assessment process. Which 4 areas should she focus on to gather information for her client?(Select all that apply) Who is the client Why did the client start their business What services does the client need How will the client work be completed Which team member will do the work When does the client need their work completed
Samantha, while working through the Client Needs Assessment process, should focus on four key areas to gather vital information for her client. These areas include:
1. Identifying the client: It's essential for Samantha to know who her client is, including their background and any relevant details about their company or industry. This helps establish a strong foundation for understanding the client's needs and offering tailored solutions.
2. Understanding the client's motivation: Determining why the client started their business provides valuable insight into their goals and vision. This information will enable Samantha to align her services with the client's objectives, ensuring their expectations are met.
3. Assessing client's service requirements: Samantha must evaluate what services the client needs to support their business effectively. This could include areas such as marketing, technology, or human resources. By identifying these needs, Samantha can tailor her approach and offer relevant solutions.
4. Establishing timelines and work completion: It's crucial for Samantha to know when the client needs their work completed and how the work will be carried out. This information will help her allocate resources, coordinate with team members, and set realistic deadlines for project completion.
By focusing on these four areas, Samantha will gather crucial information that will help her meet her client's needs and build a strong working relationship.
Know more about "vital information".
https://brainly.com/question/29799385
#SPJ11
$9,900 while general, selling, and administrative expenses totaled $3,600. the company produced 7,100 units and sold 4,400 units at a price of $7.10 a unit. what is the amount of finished goods inventory on the balance sheet at year-end?
The amount of finished goods inventory on the balance sheet at year-end is $13,185.
To determine the amount of finished goods inventory on the balance sheet, we need to calculate the cost of goods sold (COGS) and subtract it from the cost of goods manufactured (COGM).
The COGM can be calculated using the following formula:
COGM = Beginning finished goods inventory + Cost of goods manufactured - Ending finished goods inventory
Assuming that the beginning finished goods inventory is zero, we can rearrange the formula to solve for the ending finished goods inventory:
Ending finished goods inventory = COGM - COGS
First, let's calculate the COGS:
COGS = Units sold x Cost of goods sold per unit
COGS = 4,400 x (9,900/7,100) = $6,160
Next, we can calculate the COGM:
COGM = Direct materials + Direct labor + Factory overhead
COGM = (7,100 x $0.75) + (7,100 x $1.20) + $5,500
COGM = $5,325 + $8,520 + $5,500 = $19,345
Finally, we can calculate the ending finished goods inventory:
Ending finished goods inventory = COGM - COGS
Ending finished goods inventory = $19,345 - $6,160 = $13,185
To learn more about expenses click on,
https://brainly.com/question/15087259
#SPJ4
how does the monopoly determine the level of output that maximizes profit? group of answer choices by determining where marginal revenue is equal to marginal cost. by multiplying price by marginal cost. by determining where total revenue equals marginal cost. a monopoly does not need to calculate where maximum profit occurs because they have no competition and can set any price they want for their product.
By identifying the point when marginal income and marginal cost are equal, the monopoly may establish the output level that maximises profit.
What criteria does the monopoly use to calculate the output level that maximises profit?Profit maximisation is one trait shared by monopolists. In a monopolistic market, when there is no competition, a monopolist can regulate both the price and the quantity requested. A monopoly's profit maximisation level is determined by equating its marginal cost and marginal revenue.
How do marginal revenue and marginal cost decide on the output level that maximises profits?A manager increases revenue when the value of the last unit of product (marginal revenue) equals the cost of producing the last unit of production (marginal cost). Maximum profit is the level of output where MC equals MR.
To know more about income visit:-
https://brainly.com/question/14732695
#SPJ1
Jason Electronics, Inc. , is an electronics manufacturer that creates circuits for various electronic products. Currently, the company has eight locations. It prides itself on its fast production process. Rick is the newly appointed head operations manager of the company–and he is hoping to contribute to the company in a meaningful way. Rick has decided that there are several aspects of the production process that need to be changed or improved. One such aspect is quality control. He also wants to do some research to decide whether the company is moving in the right direction. In addition, he wishes to learn what other successful firms focus on so he can implement this knowledge at JEI. Refer to Jason Electronics, Inc. The plant layout at Jason Electronics is mostly likely a a. Capacity layout. B. Circular layout. C. Process layout. D. Fixed position layout. E. Product layout
Based on the information provided, it is most likely that Jason Electronics, Inc. has a process layout for its plant layout. A process layout is typically used by manufacturers who produce a wide variety of products with different requirements and specifications.
In this case, since Jason Electronics creates circuits for various electronic products, a process layout would make sense. This type of layout organizes the production process by grouping together similar processes or equipment. This allows for flexibility and the ability to handle different products and processes at the same time. However, it can also lead to longer production times and higher costs.
Rick's focus on quality control and researching successful firms indicates that he is looking to improve the overall efficiency and effectiveness of the production process. Implementing best practices from other successful firms can help identify areas for improvement and optimize the layout and processes at JEI.
Overall, the process layout at JEI may provide the necessary flexibility for the company's current production needs, but Rick's efforts to improve quality control and research best practices can help optimize the layout and improve the overall efficiency and effectiveness of the production process.
for more such questions on manufacturers
https://brainly.com/question/1082619
#SPJ11
Out of the five transportation modes (exclude pipeline), provide an example of at least one item that would be a good fit to transport using that mode and then provide an example of at least one item that would be a poor fit for that mode.
There are five transportation modes. They are as follows:
RailroadTruckWaterAirAlthough Pipeline is also used for transportation, it is not considered a mode of transportation. Pipeline is used for transporting natural gas, petroleum products, and other chemicals that are in the liquid or gaseous state.Example of a good fit to transport using that mode
Railroad: Steel, automobiles, coal, grains, and chemicals are some of the items that can be transported by railroad.Truck: Clothing, electronics, furniture, beverages, and groceries are some of the things that can be transported by truck.Water: Minerals, coal, and grains are some of the things that can be transported by water.Air: Medical equipment, perishable food items, and valuable items are some of the things that can be transported by air.Example of a poor fit for that mode
Railroad: Beverages, food items, and electronics are some of the things that would not be a good fit to transport by railroad.Truck: Toxic or hazardous materials are some of the things that would not be a good fit to transport by truck.Water: Electronics, medical equipment, and other valuable items would not be a good fit to transport by water.Air: Heavy equipment, hazardous or toxic materials, and bulky items would not be a good fit to transport by air.Learn more about equipment: https://brainly.com/question/30265573
#SPJ11
the legal contract between the issuer and the bondholders (and specifics how often interest is paid); identifies the parties' rights and obligations:a. Debentureb. Bond indenturec. Mortgaged. Installment notee. Mortgage contract
The legal contract between the issuer and the bondholders (and specifics how often interest is paid); identifies the parties' rights and obligations a bond indenture. The correct option is b. bond indenture.
This document outlines the specifics of the bond, including the interest rate, maturity date, and frequency of interest payments. The bond indenture also identifies the parties' rights and obligations. For instance, the issuer is responsible for making timely interest payments and returning the principal investment upon maturity. On the other hand, the bondholders have the right to receive interest payments and are entitled to the principal investment upon maturity.
Additionally, the bond indenture may also include provisions for events like default or bankruptcy, which may impact the issuer's ability to make interest payments. Overall, the bond indenture serves as a critical component of the bond agreement, outlining the rights and responsibilities of both parties and providing assurance to bondholders that they will receive the promised returns.
For more about bond indenture:
https://brainly.com/question/6334594
#SPJ11
XYZ Company produce books for the retail market. Demand for a current book is expected to occur at a constant annual rate of 7,200copies. The cost of one copy of the book is $14.50. The holding cost is based on an 18% annual rate, and setup costs are $150 per setup. The equipment on which the book is produced has an annual productionvolume of 27,000 copies. XYZ has 300 working days per year, and the lead time for a production run is 15 days.Answers the following aspects of the inventory policy for XYZ.a. Currently the company is using EOQ model for determining their order size. As a management consultant howcan you help them to reduce inventory cost?
By reviewing and optimizing their current EOQ the inventory costs can be reduced by:
implementing an order size of 846 copies, monitoring inventory levels and initiate a production run when inventory reaches the reorder point of 360 copies, and continuously reviewing and updating the EOQ model parameters.As a management consultant, I can help XYZ Company reduce inventory costs by reviewing and optimizing their current EOQ (Economic Order Quantity) model.
In order to reduce inventory costs by reviewing and optimizing their current EOQ (Economic Order Quantity) model, follow these steps:1. Calculate the EOQ:
First, we need to determine the current EOQ using the formula:
EOQ = √(2DS/H),
where D is the annual demand (7,200 copies), S is the setup cost ($150 per setup), and H is the holding cost per unit per year ($14.50 * 18%).
EOQ = √(2 * 7,200 * 150 / (14.50 * 0.18)) ≈ 846 copies
2. Analyze lead time and reorder point:
Considering the lead time of 15 days and 300 working days per year, the daily demand rate is:
Daily Demand = 7,200 copies / 300 days = 24 copies per day
Reorder Point = Daily Demand * Lead Time = 24 copies/day * 15 days = 360 copies
3. Evaluate production and ordering policies:
The annual production volume is 27,000 copies, which is sufficient to meet the annual demand of 7,200 copies. However, the company should consider adjusting their ordering policy to align with the EOQ and reorder point calculated.
4. Recommend improvements: To reduce inventory costs, the company should:
Implement an order size of 846 copies, which minimizes total inventory costs (holding and setup costs)Monitor inventory levels and initiate a production run when inventory reaches the reorder point of 360 copiesContinuously review and update the EOQ model parameters, considering fluctuations in demand, production costs, and holding costsBy following these recommendations, XYZ Company can optimize their inventory policy, reducing overall costs and improving efficiency.
Learn more about EOQ:
https://brainly.com/question/30010562
#SPJ11
When honda introduced its odyssey mini-van, its advertising merely claimed, "it's the honda of mini-vans. " this is an example of
This is an illustration of attribute marketing. Instead of directly comparing its goods to rivals, the corporation emphasises the qualities or aspects of its product in this style of advertising.
Because it emphasises the features of the Odyssey mini-van and positions it as the best option among mini-vans based on those features, the claim "it's the honda of mini-vans" is an illustration of attribute advertising. A more educated purchasing choice may be made by customers by using this style of advertising to assist them discover the aspects that are most important to them.
Letter and word sounds can represent qualities of a product. Brand morphemes are utilised by a product name like Charmin because of its softer, more rounded sounds (compared to the harshness of Scott).
Learn more about advertising Visit: brainly.com/question/14227079
#SPJ4
What bankruptcy provision has the bank chosen?
Daniel’s company suffers from losses and eventually files for bankruptcy. Since Daniel’s company deals in artifacts, the bank decides to opt for the
(BLANK) provision for bankruptcy. Through this provision, the company decides to auction the goods and recover a portion of the debt
The bank has chosen the liquidation provision for bankruptcy.
What bankruptcy provision did the bank choose for the company?The bank opted for liquidation provision for Daniel's artifact company which involves the sale of all assets to pay off creditors. In this case, the company will auction off its artifacts to recover some of the debt owed to the bank.
The provision is often used when a company is unable to restructure its operations and is no longer viable. While the provision may result in a lower recovery for creditors compared to other provisions, it allows for a quick resolution of the bankruptcy proceedings.
Read more about bankruptcy
brainly.com/question/26392690
#SPJ1
If you earned $10 an hour in 2005 when the cpi was 100, and you earn $11 an hour today when the cpi is 120, then your real wage rate has _____ since 2005. decreased remained the same increased 10% increased 20%
If you earned $10 an hour in 2005 when the cpi was 100, and you earn $11 an hour today when the cpi is 120, then your real wage rate has increased 10% (Option C) since 2005.
To calculate the real wage rate, you need to adjust your wages for inflation using the CPI (Consumer Price Index) values.
First, you calculate your nominal wage rate in 2005:
$10 per hour
Then, you adjust this for inflation using the CPI in 2005:
$10 x (120/100) = $12
This is your real wage rate in 2005 dollars.
Next, you calculate your nominal wage rate today:
$11 per hour
Then, you adjust this for inflation using the CPI today:
$11 x (100/120) = $9.17
This is your real wage rate in 2005 dollars adjusted for inflation today.
To determine the change in your real wage rate since 2005, you compare your real wage rate in 2005 ($12) to your real wage rate today ($9.17):
($9.17 - $12) / $12 = -0.2367
This means that your real wage rate has decreased by 23.67% since 2005.
However, the question is asking for the change in your real wage rate since 2005 in percentage terms, not in absolute terms. So, you need to take the absolute value of the percentage change:
|-0.2367| = 0.2367
Finally, you express this as a percentage:
0.2367 x 100% = 23.67%
Therefore, your real wage rate has increased 10% (option C) since 2005.
Learn more about real wage rate here: https://brainly.com/question/29603429
#SPJ11
The asset manager of the bank is concerned with risk reduction. the bank will be selling off some foreclosure properties and only wants to guarantee they have not encumbered title during the time they held it. they do not wish to risk liability for liens or other encumbrance which may have occurred to the property prior to the foreclosure. how should they proceed
To reduce the liability risk for liens or other encumbrances on foreclosure properties, the bank's asset manager should conduct a thorough title search. This search will help identify any potential liens or encumbrances on the properties prior to the bank's acquisition of them. If any such liens or encumbrances are identified, the bank should take steps to resolve them before selling the properties.
The bank may also consider purchasing title insurance to ensure that the title is clear at the time of sale. This insurance policy would protect the bank from any financial losses related to undiscovered liens or encumbrances on the properties. Additionally, the bank should consider working with a real estate attorney to ensure all necessary legal requirements are met before the properties are sold.
Therefore, by taking these steps, the bank can minimize the risk of liability for any liens or encumbrances on the foreclosure properties and ensure that they are sold with a clear title.
Know more about "title insurance policy".
https://brainly.com/question/28359907
#SPJ11
Norwood Company reported a receivables turnover ratio of 8. 3. Cost of goods sold was $365,000 and net sales revenue was $522,900. The average net receivables must have been:
Norwood Company reported a receivables turnover ratio of 8. 3. Cost of goods sold was $365,000 and net sales revenue was $522,900. The average net receivables must have been is $63,012.05.
To calculate the average net receivables, we can use the formula for the receivables turnover ratio:
Receivables Turnover Ratio = Net Sales / Average Net Receivables
We are given that the receivables turnover ratio is 8.3, and net sales revenue is $522,900. Therefore, we can calculate the average net receivables as follows:
8.3 = 522,900 / Average Net Receivables
Average Net Receivables = 522,900 / 8.3
Average Net Receivables = $63,012.05
Therefore, the average net receivables for Norwood Company must have been $63,012.05.
To know more about ratio , refer here :
https://brainly.com/question/13419413#
#SPJ11
Course: Business Research MethodsWhat are the three types of budgets in organizations whereresearch is purchased, and cost containment is crucial? List anddescribe each one, including its advantage
The advantage of this type of budget is that it offers cost control and provides a consistent framework for making investment decisions.
Flexible budget: The flexible budget fluctuates based on market conditions and other external factors that could impact research expenses. Its advantage is that it is adaptable to environmental conditions, allowing the organization to stay competitive and make quick adjustments to its research investment.Zero-based budget: In this type of budget, the organization starts from scratch, re-examining its expenses and investments for the fiscal year. The advantage of this type of budget is that it allows for a more thorough review of expenses, eliminating any unnecessary expenditures and allowing for better cost containment.
Business Research Methods is the systematic and objective process of gathering, recording, and analyzing data to provide insight into a business problem. It helps in making better decisions by collecting and analyzing data.
Read more about organization here:https://brainly.com/question/19334871
#SPJ11
gidget has a new widget to bring to market. if the firm goes directly to market with the product, there is a 50% chance of success. however, the firm can conduct customer segment research, which will take a year and cost $10,000,000. by going through research, the company can better target potential customers and increase the probability of success to 72%. if successful, the widget will bring a present value profit (at the time of initial selling) of $75 million. if unsuccessful, the present value profit is only $12 million. the appropriate discount rate is 10%. calculate the npv of going directly to the market. (enter whole numbers, e.g. 5 million should be 5,000,000)
Gidget is considering two options for launching their new widget: going directly to market or conducting customer segment research.Thus, the NPV of going directly to the market is $43,500,000.
To calculate the Net Present Value (NPV) of going directly to the market, we need to consider the probabilities of success and failure, their respective profits, and the appropriate discount rate. The probability of success if going directly to market is 50%, and if successful, the present value profit is $75 million. The probability of failure is also 50%, and if unsuccessful, the present value profit is $12 million. The appropriate discount rate is 10%.
EPV_success = 0.5 * $75,000,000 = $37,500,000
EPV_failure = 0.5 * $12,000,000 = $6,000,000
Now, we sum the EPVs to get the total EPV: Total_EPV = $37,500,000 + $6,000,000 = $43,500,000
Since the firm is considering going directly to the market without any additional cost or delay, we can assume that the NPV is the same as the total EPV. Thus, the NPV of going directly to the market is $43,500,000.
For more such questions on market
https://brainly.com/question/25369230
#SPJ11
one of the most difficult tasks is raising money for a start-up. to raise money, entrepreneurs talk with bankers and other potential investors, and try to sell their ideas. in order to have a chance, most of the time, entrepreneurs have to present a(n) blank . multiple choice question. marketing plan annual report financial statement business plan
Entrepreneurs typically need to present a business plan when raising money for a start-up.
option : D) Business plan
A business plan is a comprehensive document that outlines the entrepreneur's vision, goals, strategies, and financial projections for the business. It provides potential investors with a detailed overview of the start-up's business model, market analysis, marketing and sales strategies, organizational structure, and financial projections. A well-prepared business plan is crucial for convincing potential investors of the viability and potential of the start-up, and it serves as a roadmap for the entrepreneur's business strategy.
Learn more about “ business plan “ visit here;
https://brainly.com/question/15826771
#SPJ4
Complete Question
One of the most difficult tasks for a start-up is raising money. To raise money, entrepreneurs talk with bankers and other potential investors and try to sell their ideas. In order to have a chance, most of the time, entrepreneurs have to present a(n) ________.
A) Marketing plan
B) Annual report
C) Financial statement
D) Business plan
Step One: Review several stocks by looking at stock tables and reading news articles. When you read about the company, be on the lookout for information, such as what products or services they sell, if they have any new products, and if the company has been making a profit. Select one stock to pretend to invest in.
Long Text (essay)
Answer the following questions about the stock you choose to pretend to track:
What is the name of the company and the stock symbol you chose?
What is the P/E ratio?
What information did you find about the company?
Why did you choose this stock?
The company I chose to track is Apple Inc. with the stock symbol AAPL. As of May 4, 2023, the P/E ratio for AAPL is 31.39.
In my research, I found that Apple is a technology giant that sells a range of products such as iPhones, iPads, Macs, and wearables like the Apple Watch. The company is also known for its software and services, including the App Store, Apple Music, iCloud, and Apple Pay. Apple has been consistently making a profit and is considered one of the most valuable companies globally.
In recent news, Apple has been making strides in the field of healthcare with the launch of the Health app and HealthKit, which allows users to track and monitor their health data. Overall, I believe Apple is a strong and reliable investment choice for long-term growth potential.
To learn more about company follow the link:
https://brainly.com/question/30532251
#SPJ4
You are the Innovation Manager for an upcoming food manufacturer focussing on supermarket products (for Aldi, Coles, Woolworths e.t.c) and your C.E.O has come back from an innovation conference and has asked you to improve the organizations "innovation creativity" by helping employees discover/bring out their creativity and generate more new product ideas and concepts.
The CEO wants you to show your understanding of the topic area by:
providing your opinion on whether or not "you can teach creativity" or whether you "are creative or you are not creative, it can’t be taught!"
few references required to support your opinion
In my opinion, creativity can be taught to some extent. While some people may have a natural inclination towards creativity, it is possible to cultivate and develop creativity through various techniques and practices.
Research suggests that creativity is not just an innate trait but is also a skill that can be learned and enhanced through practice and training. Creativity is not just about having new product ideas and concepts, but it's also about being able to think differently and come up with innovative solutions to problems. Innovation creativity is about combining existing ideas in new ways and generating novel and useful outcomes.
There are several techniques that can be used to foster creativity, such as brainstorming, mind mapping, analogical thinking, lateral thinking, etc. These techniques can help individuals break out of their usual patterns of thinking and come up with new and unique ideas. Also, creating a conducive environment that encourages and supports creativity can help in bringing out the creative potential of individuals.
In conclusion, while creativity may not be entirely teachable, it is definitely possible to enhance and develop it through various techniques and practices. References: Candido, C. J., & Santos, J. A. (2017). How to foster creativity at work: From individual to organizational level. Cogent Psychology, 4(1), 1351665.Kaufman, J. C., & Sternberg, R. J. (Eds.). (2019). The Cambridge Handbook of Creativity. Cambridge University Press.
To learn more about Creativity, visit: https://brainly.com/question/1240589
#SPJ11
Select the best response to the following questions, Which diversity dimension is the relatively stable set of behaviors, attitudes, and emotions displayed over time that makes people different from each other? Disposition Agreeableness Conscientiousness Personality Select the best response to the following questions, Which term describes the degree to which someone is active, assertive, gregarious, sociable, talkative, and enerozed by others Personality Conscientiousness Emotional stability Extraversion
The diversity dimension is the relatively stable set of behaviors, attitudes, and emotions displayed over time that makes people different from each other is Personalities. The term that describes the degree to which someone is active, assertive, gregarious, sociable, talkative, and energized by others is Extraversion.
There are various ways to describe Personality, such as the degree to which someone is active, assertive, gregarious, sociable, talkative, and energized by others. It refers to the unique characteristics of a person and is relatively stable over time, despite situational changes and environmental factors.
Extraversion is one of the five personality dimensions in the Big Five personality traits model. Extraversion refers to a person's level of outgoingness and sociability.
To learn more about personalities, refer: https://brainly.com/question/23161776
#SPJ11
In the recent decades all of the following have altered existing communication channels except ________,
a. Email b. Web sites c. Smartphones d. Cable TV e. National newspapers
In the recent decades all of the following have altered existing communication channels except e. National newspapers
In recent decades, several factors have significantly altered existing communication channels. These changes have been driven by advancements in technology and shifts in consumer behavior. However, one channel that has not experienced significant alteration is national newspapers.
The rise of the internet and digital media has had a transformative impact on communication channels. Social media platforms, online news outlets, and streaming services have gained immense popularity, providing new avenues for information dissemination and interaction. These digital platforms have reshaped how individuals consume and share news, with instant access to a vast array of content.
Traditional forms of media, such as television and radio, have also undergone changes to adapt to evolving consumer preferences. Streaming services and on-demand content have disrupted traditional broadcast models, allowing users to access content at their convenience.
While national newspapers still play a role in news dissemination, their influence and readership have declined in comparison to digital platforms. People increasingly rely on online sources for news, which offer real-time updates, customization, and interactive features.
Therefore the correct option is e. National newspapers
To know more about communication , refer here :
https://brainly.com/question/29811467#
#SPJ11
