using a programming language can help you with which aspects of data analysis? select all that apply. 1 point transform your data ask the right questions about your data visualize your data clean your data

The domain name server (DNS) is performing a recursive lookup. This means that the DNS server is not only attempting to resolve the requested domain name, but it is also querying other DNS servers in order to find the correct IP address associated with that domain name.

For such more question on querying

https://brainly.com/question/30622425

#SPJ11

In a crossbar switch, two time slots are the absolute minimum needed for packet transfers, but four slots are needed in a bus. This is so because a bus can only transfer one packet at a time, whereas a crossbar can transfer numerous packets concurrently.

Switching through memory, switching through a bus, and switching through a network of connections are the three methods of switching.

Switch Fabric Capacity: This term often refers to the fastest rate at which hardware can transfer data between cards or ports. Since the vendors count full duplex, the Switch Fabric Capacity is typically double what it actually is and is expressed in bits per second (bps).

To know more about time slots visit:

https://brainly.com/question/30000870

#SPJ1

In this scenario, since you have corrected the IP address in the A resource record, the DNS configuration may not have propagated to the secondary server (dns2) yet.

To ensure that the correct DNS information is available, you should follow these steps:

After completing these steps, try connecting to the web server again from your workstation. The correct DNS information should be available now, and you should be able to connect to the web server.

For more question on DNS click on

https://brainly.com/question/27960126

#SPJ11

The first step to organizing frequently used commands in groups on a new tab on the ribbon is to add a new tab to the ribbon. This can be done by right-clicking on the ribbon and selecting "Customize the Ribbon" from the drop-down menu. In the dialog box that appears, click on the "New Tab" button to create a new tab.

1)Once the new tab has been created, the next step is to create a group on the tab. This can be done by selecting the new tab and clicking on the "New Group" button in the same dialog box. Give the group a name that reflects the commands that will be added to it.

2)After the group has been created, the next step is to add commands to it. This can be done by selecting the group and clicking on the "Add" button in the same dialog box. Select the command that you want to add from the list of available commands and click on "OK".

3)Repeat the process of adding commands to the group until all of the frequently used commands have been added. Once all of the commands have been added, click on "OK" to close the dialog box and save the changes.

4)In conclusion, the first step to organizing frequently used commands in groups on a new tab on the ribbon is to add a new tab to the ribbon. From there, a group can be created on the new tab, commands can be added to the group, and the group can be customized to suit your needs.

For such more question on frequently

https://brainly.com/question/28776010

#SPJ11

Mr. and Mrs. Jones plan on retiring with 70% of their pre-retirement earnings, which means their retirement income will be $32,900.

To calculate their retirement income, we can use the following formula: Retirement income = Pre-retirement earnings x Retirement percentage. In this case, the pre-retirement earnings are $47,000, and the retirement percentage is 70% or 0.7 as a decimal.

Using the formula, we can calculate Jones' retirement income as, Retirement income = $47,000 x 0.7 = $32,900. Therefore, Mr. and Mrs. Jones plan on having a retirement income of $32,900 based on their pre-retirement earnings and their chosen retirement percentage.

It is worth noting that the amount of retirement income needed can vary depending on individual circumstances such as lifestyle, location, and healthcare costs. While using a percentage of pre-retirement earnings as a retirement income target can be a useful starting point, it is important to consider individual factors and adjust the retirement income target accordingly. Additionally, it is important to plan and start saving for retirement early to ensure a comfortable and financially secure retirement.

To learn more about pre-retirement earnings, visit:

https://brainly.com/question/1408876

#SPJ11

The most common redundant storage configuration for hosting the operating system and applications on a server is RAID 1 or mirroring.

Explanation:
RAID 1 or mirroring is the most common redundant storage configuration used for hosting the operating system and applications on a server. In this configuration, two identical hard drives are used, and all data is written to both drives simultaneously. This provides redundancy as if one drive fails, the other drive can be used to continue operations without any data loss. RAID 1 is a cost-effective solution for small to medium-sized businesses that require data redundancy without the need for high-speed data access.

To know more about the   RAID 1 click here:

https://brainly.com/question/30186405

#SPJ11

Here is the completed Fibonacci method:
public int fibonacci(int n) {
  if (n < 0) {
     return -1; // return -1 for negative index values
  }
  int first = 0;
  int second = 1;
  for (int i = 0; i < n; i++) {
     int temp = second;
     second = first + second;
     first = temp;
  }
  return first; // return the nth value in the sequence
}

In this method, we first check if the index value is negative. If it is, we return -1 as specified in the prompt. Otherwise, we initialize the first and second values of the sequence to 0 and 1 respectively. Then, we use a for loop to iterate through the sequence up to the nth value specified by the index. In each iteration, we calculate the next value in the sequence by adding the previous two values together. Finally, we return the nth value in the sequence, which is the value of the "first" variable at the end of the loop.

Learn more about Fibonacci; https://brainly.com/question/18369914

#SPJ11

Answer:

105

Explanation:

Let the unknown number be " x ".

75 + x = 180

Subtract 75 on both sides,

x = 180 - 75

x = 105

Insertion sort is a simple and intuitive sorting algorithm that works by building a sorted sequence one element at a time. It is an in-place comparison-based algorithm that sorts an array by shifting elements one at a time to their correct position.

For such more question on algorithm

https://brainly.com/question/29927475

#SPJ11

To design a circuit that satisfies the given specifications, we can use a shift register and a combinational logic circuit. The shift register will store the last three bits read, and the combinational logic circuit will check if the bits match the pattern 001.

The circuit will have two inputs: clk and X. The clk input is a clock signal that triggers the circuit to sample the X input at every rising edge. The X input is the binary input that may change every clock cycle, and the change happens at the falling edge. To detect the falling edge of the clock signal, we can use a flip-flop.

At every rising edge of the clock, the circuit will sample the X input and store the bit in a shift register. The shift register will have three stages, and it will shift the bits to the right at every clock cycle. The most recent bit will be stored in the first stage, and the oldest bit will be stored in the third stage.

The combinational logic circuit will check if the three bits stored in the shift register match the pattern 001. If the bits match the pattern, the output O will be set to 1 for one clock cycle, from positive edge to positive edge. Otherwise, the output will be set to 0.

To implement the combinational logic circuit, we can use a series of AND gates and inverters. We can connect the output of the shift register to the inputs of the AND gates, and use the outputs of the gates to check if the bits match the pattern. If the three bits match the pattern, the output of the last AND gate will be 1, and we can use an inverter to generate the output O.

To learn more about Circuit designing, visit:

https://brainly.com/question/2969220

#SPJ11

The functions of AI systems should be aligned with the functions expected from ethical principles.

In order to implement ethics in AI systems, it is essential to align their functions with ethical principles such as fairness, accountability, transparency, and privacy.

AI systems must be designed to ensure that they do not cause harm to individuals or groups and promote the well-being of society as a whole. The functions of AI systems should be aligned with ethical principles to ensure that they are consistent with human values and social norms.

This can be achieved through the development of ethical frameworks and guidelines that govern the design, development, and deployment of AI systems.

Overall, aligning the functions of AI systems with ethical principles is crucial to ensuring their responsible and beneficial use in society.

For more questions like Society click the link below:

https://brainly.com/question/9321341

#SPJ11

Jeff Sutherland is a software engineer and the co-creator of Scrum, an agile framework for software development. He was frustrated with the traditional, linear approach to software development, which often resulted in delays, missed deadlines, and unsatisfactory products.

Sutherland also applied the principles of Scrum to other aspects of life, beyond software development. For instance, he wrote a book called "Scrum: The Art of Doing Twice the Work in Half the Time," which explains how the framework can be applied to a wide range of projects, from planning a wedding to running a political campaign.

The key principles of Scrum, including transparency, inspection, and adaptation, can be used to improve productivity, increase teamwork, and achieve better outcomes in any type of project.

Learn more about Jeff Sutherland here:

https://brainly.com/question/30092291

#SPJ1

Answer:

Select Start > Settings > Apps > Apps & features.

Under Installing apps, select one of the available options. To stop seeing app recommendations, select either Allow apps from anywhere or Turn off app recommendations (options vary by Windows version).

Explanation:

To change the app recommendation settings in Windows 11, you can customize the app recommendations by clicking on "Customize your app list" and selecting which apps you want to see on the Start menu.

You may also follow these simple steps: 1. Click on the Start button and select Settings (gear icon) from the menu. 2. In the Settings window, click on the Personalization tab on the left side.

3. Then click on the Start option under the Personalization tab.
4. Scroll down to the "Show app recommendations" option and toggle it off to disable app recommendations on the Start menu.
5. Alternatively, you can customize the app recommendations by clicking on "Customize your app list" and selecting which apps you want to see on the Start menu.

That's it! With these steps, you can easily customize the app recommendations in Windows 11 to your liking. This will help you avoid clutter on your Start menu and ensure that you only see the apps that you use the most.

You can learn more about Windows 11 at: brainly.com/question/31264202

#SPJ11

it will display a menu with the current values for expenses and income. You can choose to modify any of these values or quit the program. If you modify a value,

Sure, I can help you with that! Here's a Python script that should do what you're asking for:

```python

def calculate_profit_loss(expenses, income, servings):

   """

   Calculates the profit or loss based on the given expenses, income, and number of servings sold.

   """

   revenue = income * servings

   cost_of_goods_sold = expenses['raw_ingredient_cost'] * servings

   labor_cost = expenses['hourly_labor_rate'] * 8 * 6 * 4

   total_expenses = cost_of_goods_sold + labor_cost + expenses['rental_cost'] + expenses['utilities_cost'] + expenses['advertising_budget']

   profit_loss = revenue - total_expenses

   return profit_loss

def perform_what_if_analysis(expenses, income, servings):

   """

   Performs a what-if analysis on the given expenses, income, and number of servings sold.

   """

   print("What-if analysis:")

   print("=================")

   for i in range(1, 6):

       new_expenses = expenses.copy()

       new_expenses[list(expenses.keys())[i-1]] *= 1.1  # Increase the selected expense by 10%

       new_profit_loss = calculate_profit_loss(new_expenses, income, servings)

       print(f"If {list(expenses.keys())[i-1]} increases by 10%, profit/loss will be: {new_profit_loss:.2f}")

   print()

def main():

   # Set default values for expenses and income

   expenses = {

       'raw_ingredient_cost': 1.0,

       'hourly_labor_rate': 7.5,

       'rental_cost': 800,

       'utilities_cost': 150,

       'advertising_budget': 100

   }

   income = 4.0

   servings = 500

   # Loop for the menu

   while True:

       # Print the menu

       print("Ice Cream Shop Profit Calculator\n")

       print("Expenses:")

       for i, expense in enumerate(expenses.items()):

           print(f"{i+1}. {expense[0].replace('_', ' ').title()}: {expense[1]:.2f}")

       print("\nIncome:")

       print(f"6. Selling price per serving: {income:.2f}")

       print(f"7. Number of servings sold per month: {servings}\n")

       # Ask the user to choose an option

       choice = input("Enter an option (1-7), or 'q' to quit: ")

       if choice == 'q':

           break

       elif choice == '6':

           income = float(input("Enter the new selling price: "))

       elif choice == '7':

           servings = int(input("Enter the new number of servings sold per month: "))

       elif choice in ['1', '2', '3', '4', '5']:

           expense_name = list(expenses.keys())[int(choice)-1]

           new_expense = float(input(f"Enter the new {expense_name.replace('_', ' ').title()}: "))

           expenses[expense_name] = new_expense

       # Calculate and print the profit/loss

       profit_loss = calculate_profit_loss(expenses, income, servings)

       print(f"\nProfit/Loss: {profit_loss:.2f}\n")

       # Perform a what-if analysis

       perform_what_if_analysis(expenses, income, servings)

if __name__ == '__main__':

   main()

```

When you run the script, it will display a menu with the current values for expenses and income. You can choose to modify any of these values or quit the program. If you modify a value,

Learn more about Current values

brainly.com/question/30880193

#SPJ11

Social and cultural issues around scientific development can include concerns about the ethics of research, the potential impacts of new technologies on society, and the accessibility of scientific knowledge to different communities.

One of the most significant social issues around scientific development is the question of ethics. As new technologies and scientific advances emerge, there is often debate around the ethical implications of these developments, particularly in cases where research involves human subjects or has the potential to impact the environment or other species. Questions of ethics can also arise around the funding and sponsorship of scientific research, with concerns about conflicts of interest or biases influencing the outcomes of studies.

Cultural issues can also arise around scientific development, particularly in cases where new technologies or innovations have the potential to impact traditional practices or beliefs. For example, the introduction of genetically modified crops or new medical treatments may be met with resistance from communities who have cultural or religious objections to these practices. Similarly, concerns around cultural appropriation or the exploitation of indigenous knowledge may arise in cases where scientific research involves the study of traditional or indigenous practices.

To learn more about Technology development, visit:

https://brainly.com/question/13044551

#SPJ11

The task for this assignment involves using a simplified version of an algorithm that utilizes 2D Cartesian points and Euclidean distance measurement to calculate closeness.

Algorithm using 2D Cartesian points and Euclidean distance measurement to calculate closeness:

1. Read input values n and k, and the n pre-classified points with their coordinates (x, y) and labels (R or B).
2. Read the unknown point's coordinates (x, y).
3. Calculate the Euclidean distance between the unknown point and each of the pre-classified points.
4. Sort the pre-classified points based on their calculated distances from the unknown point in ascending order.
5. Select the first k points from the sorted list.
6. Count the occurrences of labels R and B among the selected k points.
7. Classify the unknown point as R or B based on which label occurred more frequently among the k points.

For the given example:

Input:
10 3
3.57 -3.18 R
84.91 27.69 B
93.40 4.62 B
-67.87 9.71 B
75.77 82.35 B
-74.31 -69.48 R
39.22 31.71 R
-65.55 95.02 B
17.12 3.44 B
70.60 -43.87 R
25.60 -10.15

Output:
R

In this case, the unknown point (25.60, -10.15) is classified as R, since there are more R labels among the 3 nearest neighbors.

To  know more about  Euclidean distance visit:

https://brainly.com/question/31538311

#SPJ11

The rise of artificial intelligence (AI) raises important social and ethical concerns including potential job loss, bias in algorithms, military applications, privacy, accountability, and impact on society.

One of the most significant developments in computing technology in recent years is the rise of artificial intelligence (AI).

AI has the potential to revolutionize many fields, from healthcare to transportation, One of the most pressing issues facing the computing technology industry today is the growing problem of electronic waste, or e-waste.

E-waste refers to any electronic device that is no longer useful or functional and is discarded, often ending up in landfills or being exported to developing countries.

This issue has significant social and ethical implications, as well as environmental consequences.

Background:

Issues:

Solutions:

Conclusion:

In conclusion, e-waste is a significant issue facing the computing technology industry, with serious social, ethical, and environmental implications.

Learn more about artificial intelligence

brainly.com/question/23824028

#SPJ11

A digital certificate consists of a public key plus a user ID of the key owner, with the whole block signed by a trusted third party, which is typically a Certificate Authority (CA) that is trusted by the user community.

Digital certificates are essential for secure online communication, as they help authenticate the identity of a user or server.

The public key is a crucial component of a digital certificate, as it enables users to encrypt messages and verify digital signatures. The user ID, on the other hand, identifies the key owner and provides information such as the owner's name, email address, and organization.

A trusted third party, or Certificate Authority (CA), plays a vital role in the process by signing the digital certificate. The CA verifies the authenticity of the user's identity and ensures that the public key truly belongs to the specified user. This signature from the CA creates a level of trust among users, as it guarantees that the certificate is genuine and has not been tampered with.

In summary, a digital certificate consists of a public key and a user ID, both of which are essential for secure communication over the internet. The Certificate Authority, acting as a trusted third party, verifies the authenticity of the user's identity and signs the certificate to establish trust within the user community. This ensures that online transactions and communications are secure and reliable.

Learn more about Digital certificates here: https://brainly.com/question/24931496

#SPJ11

The concept that limits access to systems from outside users while protecting users and systems inside the LAN is called network segmentation and a firewall.

What is network segmentation?

This design approach involves dividing a larger network into smaller subnetworks or segments, each with its own set of security controls and policies. By implementing network segmentation, organizations can isolate sensitive data and critical systems, limit access to them only to authorized users, and protect against external threats such as cyber-attacks. This helps to safeguard both the users and the systems by providing an added layer of protection against potential security breaches. The design concept that limits access to systems from outside users while protecting users and systems inside the LAN is called a "firewall." A firewall is a network security system that monitors and controls incoming and outgoing network traffic based on predetermined security rules. It helps to protect users and internal systems by filtering out unauthorized access from external sources. This design ensures the security and integrity of the systems and data within the LAN.

To  know more about network segmentation visit:

https://brainly.com/question/27748721

#SPJ11

Yes, Mr. Leon is giving enough instruction to Mr. Andrew for the task mentioned and it is assumed that Mr. Andrew is ready to start testing.

By providing quality tools and equipment and setting a specific deadline, Mr. Leon is giving Mr. Andrew clear instructions for the task of checking and testing the motherboard.

The provision of quality tools and equipment ensures that Mr. Andrew has everything he needs to complete the task, while the specific deadline provides a clear expectation for when the task should be completed.

Assuming that Mr. Andrew has the necessary skills and knowledge to carry out the testing, he should be ready to start the task.

Overall, it appears that Mr. Leon has given adequate instructions for the task at hand, and Mr. Andrew is ready to start testing the motherboard.

For more questions like Skill click the link below:

https://brainly.com/question/22072038

#SPJ11

You can create a "validation rule" to define what data values are allowed in a cell.  

A validation rule can be created to define what data values are allowed in a cell. This is done by setting specific criteria that the data must meet, such as numerical values within a certain range or text that matches a specific pattern.

Validation rules are a useful tool for ensuring data accuracy and consistency within a spreadsheet. By defining what data values are allowed in a cell, you can prevent users from entering incorrect or inappropriate data. This can help to minimize errors and make it easier to analyze and interpret data.

To know more about validation rule visit:

https://brainly.com/question/14356883

#SPJ11

The Finance Department wants a quick solution without following the SDLC steps, and the Finance Manager suggests bypassing the initial steps; the systems request details are not given.

a. I would explain to the Finance Manager that skipping the initial steps of the systems development life cycle could result in a system that does not meet the needs of the department, and could lead to costly rework in the future.

I would suggest that we work together to prioritize the requirements and identify the most critical aspects of the system, in order to develop a solution that meets the most important needs in a timely manner.

b. I would recommend an agile development approach, which involves breaking the project down into smaller, more manageable components or iterations, with each iteration delivering a working component of the system.

This approach allows for flexibility and the ability to adapt to changing requirements, and promotes collaboration and communication between the development team and the Finance department.

This approach would enable us to deliver a solution quickly while still ensuring that it meets the needs of the department.

c. I would recommend a parallel changeover method, where the new system is implemented alongside the old system for a period of time, in order to ensure that it is working properly and to allow users to become familiar with the new system.

This approach minimizes the risk of disruption to the Finance department's operations, and allows for a smooth transition to the new system.

It also allows for any issues or bugs to be identified and resolved before fully switching over to the new system.

Learn more about Finance Department

brainly.com/question/29418689

#SPJ11

In the code above, It would be wise to ensure that the yearModel parameter in the Car class constructor is not a negative value, as it is illogical for a car to have a negative year.

Checking that the speed does not drop below zero is important while using the accelerate and brake techniques because negative speed is illogical in the case of a car.

The accelerate technique in the code does not require an input specifying the frequency of acceleration. Instead of going through the trouble of multiple steps, simply increase the speed field by 5 every time the method is invoked.

Learn more about Class from

https://brainly.com/question/30804126

#SPJ1

As technology advances, society faces an ongoing debate over the balance between individual privacy and security concerns. Monitoring movements and communications can be an effective tool for law enforcement and national security, but it also poses a risk to individual privacy and civil rights.

Society must make choices about the extent to which individuals' movements and communications can be monitored, and under what circumstances. This involves weighing the benefits of increased security against the potential harm to individual privacy and freedom. It also requires ensuring that monitoring is conducted in a transparent and accountable manner, with appropriate safeguards to prevent abuse.

Ultimately, the choices society makes about monitoring movements and communications will have a significant impact on individual rights and freedoms, and it is important to carefully consider these implications when making policy decisions

Learn more about rights at:

https://brainly.com/question/3444313

#SPJ1

The number of emails that were sent but never reached the intended receiver is known as email bounce.

Email bounces occur when an email message is returned to the sender, either because the recipient's email address is invalid or because the recipient's email server is unable to deliver the message. Bounces can be classified into two types: hard bounces and soft bounces.

Hard bounces occur when the recipient's email address is invalid or does not exist. This can happen when the recipient has changed their email address or when there is a typo in the email address. Hard bounces are permanent and the email message cannot be delivered to the recipient. In this case, the sender may receive a notification that the message was not delivered.

Soft bounces, on the other hand, are temporary and occur when the recipient's email server is unable to deliver the message at the time it was sent. This can happen when the recipient's mailbox is full, when the recipient's email server is down, or when the message is too large. In this case, the sender may receive a notification that the message was delayed or not delivered, and the email server may try to deliver the message again later.

To learn more about Soft bounces, visit:

https://brainly.com/question/30000159

#SPJ11

The purpose of the C++ program is to compute the dot product of two arrays of arbitrary size entered by the user, using a function called "dot". The expected output is the result of the dot product calculation, which is displayed using cout.

The given problem requires the implementation of a C++ program that reads in two arrays of arbitrary size and calculates their dot product using a separate function called 'dot'.

The main function takes input from the user for the length of the arrays and their values.

The dot function then takes the two arrays as input and returns the dot product value.

The main function finally prints the dot product value to the console using cout.

The program is designed to provide flexibility in the size of the arrays and allows for easy modification if needed.

Learn more about C++ program

brainly.com/question/30905580

#SPJ11

In a CSMA/CA protocol with RTS/CTS enabled, the sender can start transmitting an RTS message after a propagation delay of a one-time slot, the transmission delay of the RTS message, and the DIFS, multiplied by two. The earliest potential periods for the receiver to begin transmitting a CTS message and an acknowledgment packet may be found by taking into consideration the propagation delay, transmission delay, SIFS, and time necessary to receive the RTS message and data packet, respectively.

A. The earliest possible time for the sender to start sending an RTS message would be after a propagation delay of a one-time slot (since it has already waited for two slots), plus the transmission delay of the RTS message, plus the DIFS. Therefore, the earliest time for the sender to start sending the RTS message would be (1 * time slot) + (transmission delay of RTS) + DIFS.

B. The earliest time for the receiver to start sending a CTS message would be the time at which it receives the RTS message, plus the propagation delay of the packet from the sender to the receiver, plus the transmission delay of the CTS message, plus the SIFS. Therefore, the earliest time for the receiver to start sending the CTS message would be (propagation delay) + (transmission delay of CTS) + (time to receive RTS message) + SIFS.

C. The earliest time for the receiver to start sending an acknowledgment packet would be the time at which it receives the data packet, plus the propagation delay of the packet from the sender to the receiver, plus the transmission delay of the acknowledgment packet, plus the SIFS. Therefore, the earliest time for the receiver to start sending the acknowledgment packet would be (propagation delay) + (transmission delay of acknowledgment packet) + (time to receive data packet) + SIFS.

To learn more about Data transmission, visit:

https://brainly.com/question/24373056

#SPJ11

Netiquette refers to the set of rules and guidelines for appropriate online behavior. It includes the manners, etiquette, and social conventions that guide online communication. Netiquette helps to promote respectful and courteous communication on the internet and ensures that online interactions remain positive and productive.

Four essential netiquettes that one must follow are:

1. Be respectful - It is crucial to be respectful to others online, just as you would be in person. Avoid using offensive language or making derogatory comments about others.

2. Be mindful of tone and context - Online communication can often be misinterpreted, so it is important to consider the tone and context of your message. Use appropriate emoticons or emojis to help convey your tone.

3. Use proper grammar and spelling - Ensure that your messages are clear, concise, and free from grammatical errors. This will help to avoid misunderstandings and misinterpretations.

4. Respect people's privacy - Do not share personal information about others without their permission, and be careful about the information you share online.

In summary, following netiquette is essential to ensure that online communication is respectful, positive, and productive. It helps to promote good manners, etiquette, and social conventions on the internet.

You can learn more about Netiquette at: brainly.com/question/942794

#SPJ11

The recursive function in Python that computes the sum of the digits of a positive integer is

digit_sum(n):

if n < 10:

return n

else:

last_digit = n % 10

remaining_digits = n // 10

return last_digit + digit_sum(remaining_digits)

First, it checks if the input number `n` is less than 10. If it is, then the function returns the number itself, as the sum of the digits of a one-digit number is the number itself.

If `n` has more than one digit, the function uses the modulus operator `%` to get the last digit of `n`, and the integer division operator `//` to get the remaining digits.

The function then recursively calls itself on the remaining digits and adds the last digit to the sum. This process continues until `n` has been reduced to a single digit, at which point the function returns the sum of all the digits.

For example, usage of the function:

>>> digit_sum(12345)

15

learn more about sum digit: https://brainly.com/question/29573634

#SPJ4