The height at x = 2 seconds is greater (25 meters), the balloons collided at the highest point at 2 seconds. We can use quadratic functions to solve this.
To find the time in seconds that the balloons collided at the highest point, we will first find the points where the balloons have the same height (y) by setting the two quadratic functions equal to each other:
-7x² + 26x + 3 = -6x² + 23x + 5
Next, we will solve for x:
x² - 3x - 2 = 0
Now, factor the quadratic equation:
(x - 2)(x - 1) = 0
The solutions for x are 1 and 2 seconds. To find the highest point of collision, we need to determine which of these times results in a greater height. Plug each value of x into one of the original equations and compare the y values:
For x = 1:
y = -7(1)² + 26(1) + 3 = 22
For x = 2:
y = -7(2)² + 26(2) + 3 = 25
The balloons collided at the highest point at 2 seconds.
To know more about quadratic function click here
brainly.com/question/29775037
#SPJ11
In circle P with m \angle NPQ= 104m∠NPQ=104 and NP=9NP=9 units find area of sector NPQ. Round to the nearest hundredth
Area of sector NPQ ≈ 127.23 square units
To find the area of the sector NPQ, we first need to find the measure of the central angle that defines the sector. We know that the measure of the angle NPQ is 104 degrees, but we need to find the measure of the central angle that includes this arc.
Since NP is a radius of the circle, we know that triangle NQP is an isosceles triangle, with angles NQP and PNQ each measuring (180 - 104)/2 = 38 degrees. Therefore, the measure of the central angle that includes arc NPQ is 2 * 38 + 104 = 180 degrees.
The area of the sector NPQ is then a fraction of the total area of the circle, where the fraction is equal to the ratio of the central angle to the total angle around the circle. Since the total angle around a circle is 360 degrees, the fraction of the circle's area covered by the sector is:
180 degrees / 360 degrees = 1/2
Therefore, the area of the sector NPQ is equal to half the area of the circle with radius 9 units:
Area of sector NPQ = (1/2) * π * 9^2 = 40.5π
Rounding to the nearest hundredth, the area of the sector NPQ is approximately:
Area of sector NPQ ≈ 127.23 square units
To know more about area refer to
https://brainly.com/question/25292087
#SPJ11
can yall awnser this asap pls I NEED TO PASS!!
Answer: 36 inches
Step-by-step explanation:
The lateral surface area of a cube with sides of length 3 inches is given by the sum of the areas of all four side faces. Each side face is a square with an area equal to the product of the length and width, which in this case is 3 inches by 3 inches. Therefore, the lateral surface area of the cube is:
LSA = 4 x (3 inches x 3 inches) = 36 square inches
So the lateral surface area of the cube is 36 square inches
8. javier's deli packs lunches for a school field trip by randomly selecting sandwich, side, and drink
options. each lunch includes a sandwich (pb&j, turkey or ham and cheese), a side (cheese stick or
chips), and a drink (water or apple juice).
what is the probability that student gets a lunch that includes chips and apple juice?
what is the probability that a student gets a lunch that does not include chips?
The probability that a student gets a lunch with chips and apple juice is 1/12, and the probability that a student gets a lunch without chips is 1/2.
There are 3 choices of sandwiches, 2 choices of sides, and 2 choices of drinks, so there are a total of 3x2x2 = 12 possible lunch combinations. To find the probability that a student gets a lunch that includes chips and apple juice, we need to count the number of lunch combinations that include chips and apple juice, and then divide by the total number of possible lunch combinations.
Number of lunch combinations that include chips and apple juice = 1 (chips and apple juice is only one combination)
Total number of possible lunch combinations = 12
Probability of getting a lunch that includes chips and apple juice = 1/12
To find the probability that a student gets a lunch that does not include chips, we need to count the number of lunch combinations that do not include chips, and then divide by the total number of possible lunch combinations,
Number of lunch combinations that do not include chips = 6 (3 choices of sandwiches x 2 choices of drinks) Total number of possible lunch combinations = 12, probability of getting a lunch that does not include chips = 6/12 = 1/2
To know more about probability, visit,
https://brainly.com/question/13604758
#SPJ4
The floors and walls of gerald's attic form an equilateral triangle what is the approximate height h of the attic?
if one side of triangle is approximately 10 feet, the height of the attic is approximately 8.66 feet.
To find the height h of an equilateral triangle, we need to know the length of one of its sides. However, this information is not given in the question.
We can use the Pythagorean theorem to find an approximate value of h. Let's assume that the length of one side of the equilateral triangle is 10 feet (this is just an arbitrary value for illustration purposes).
Then, the height h can be found using the formula:
h = √(10² - (10/2)²)
h = √(100 - 25)
h = √75
h ≈ 8.66 feet
So, if one side of the equilateral triangle is approximately 10 feet, the height of the attic is approximately 8.66 feet. However, if the length of the side is different, the height will also be different.
Know more about triangle here:
https://brainly.com/question/2773823
#SPJ11
I’m confused about how to solve this by following the guide
The solution of the system of equations is
x = 4, y = 1 and z = 5What is a system of equations?A system of equations is a set of two or three equations.
Given the system of equations
x + y = 5 (1)
y + z = 6 (2)
z + x = 9 (3)
Givent he guide (1) - (2) x - z = - 1 (4), we proceed to solve the system of equations
Now, taking equations (3) and (4), we have that
z + x = 9 (3)
x - z = - 1 (4)
Adding them we have that
z + x = 9 (3)
+
x - z = - 1 (4)
2x = 9 - 1
2x = 8
x = 8/2
x = 4
From equation (3)
z = 9 - x
So, substituting the value of x into the equation, we have that
z = 9 - x
z = 9 - 4
z = 5
From equation (2)
y = 6 - z
So, substituting z into the equation, we have that
y = 6 - z
= 6 - 5
= 1
So,
x = 4, y = 1 and z = 5Learn more about system of equations here:
https://brainly.com/question/28405823
#SPJ1
The mean of the data set below is 11. What is the value of x? Explain.
12, 9, 12.5, 13, x, 10, 11, 11, 7, 9
From the given data 11 is the mean of the data set.
What is Mean ?
In statistics, the mean (also called the average) is a measure of central tendency that represents the typical value in a data set. It is calculated by adding up all the values in the data set and dividing by the number of values.
To find the value of x in the data set, we can use the formula for the mean (also called the average). The mean is calculated by adding up all the values in the data set and dividing by the number of values. In other words:
mean = (sum of all values) : (number of values)
We are given that the mean of the data set is 11, so we can write:
11 = (12 + 9 + 12.5 + 13 + x + 10 + 11 + 11 + 7 + 9) : 10
Here, we have 10 values in the data set (including the unknown value x), so we divide the sum of all the values by 10 to find the mean.
To solve for x, we can start by simplifying the right-hand side of the equation:
110 = 75.5 + x
Next, we can isolate x by subtracting 75.5 from both sides:
x = 34.5
Therefore, the value of x that makes the mean of the data set equal to 11 is x = 34.5.
In other words, if we replace the unknown value x with 34.5, the resulting data set will have a mean of 11. This means that the sum of all the values in the data set will be 110, since:
12 + 9 + 12.5 + 13 + 34.5 + 10 + 11 + 11 + 7 + 9 = 110
And when we divide this sum by 10, we get:
110 : 10 = 11
Therefore, From the given data 11 is the mean of the data set.
To learn more about Mean from given link.
https://brainly.com/question/21533310
#SPJ1
Every 12 minutes, Bus A completes a trip from P to X
to S to X to P. Every 20 minutes. Bus B completes a
trip from Q to X to T to x to Q. Every 28 minutes,
Bus C completes a trip from R to X to U to X to R. At
1:00 p. M. , Buses A, B and C depart from P. Q and R.
respectively, each driving at a constant speed, and each
turning around instantly at the endpoint of its route.
Each bus runs until 11:00 p. M. At how many times
between 5:00 p. M. And 10:00 p. M. Will two or more buses
arrive at X at the same time?
Answer:
To solve this problem, we need to find the times when two or more buses arrive at X at the same time between 5:00 p.m. and 10:00 p.m. We can start by finding the arrival times of each bus at X.
Bus A arrives at X every 32 minutes (12 minutes to S + 20 minutes to X).
Bus B arrives at X every 48 minutes (20 minutes to T + 28 minutes to X).
Bus C arrives at X every 56 minutes (28 minutes to U + 28 minutes to X).
We can create a timeline for each bus showing its arrival times at X between 1:00 p.m. and 11:00 p.m.:
Bus A: X _ _ X _ _ X _ _ X _ _ X _ _ X _ _ X
Bus B: _ _ _ _ _ X _ _ _ _ _ X _ _ _ _ _ X
Bus C: _ _ _ _ _ _ _ X _ _ _ _ _ _ _ X _ _ _
The underscores represent the times when the bus is not at X.
Now we can look at the timeline between 5:00 p.m. and 10:00 p.m. (from the 8th to the 18th arrival of Bus A at X) and count the times when two or more buses arrive at X at the same time:
5:44 p.m. - Bus A and Bus B arrive at X at the same time.
6:24 p.m. - Bus A and Bus C arrive at X at the same time.
6:56 p.m. - Bus B and Bus C arrive at X at the same time.
7:36 p.m. - Bus A and Bus B arrive at X at the same time.
8:16 p.m. - Bus A and Bus C arrive at X at the same time.
8:48 p.m. - Bus B and Bus C arrive at X at the same time.
9:28 p.m. - Bus A and Bus B arrive at X at the same time.
10:08 p.m. - Bus A and Bus C arrive at X at the same time.
Therefore, there are 8 times between 5:00 p.m. and 10:00 p.m. when two or more buses arrive at X at the same time.
To know more about arrival refer here
https://brainly.com/question/14971744#
#SPJ11
4. Lana has a bag of marbles. The probability of picking a striped marble is 8%. If Lana picks a marble and then replaces it 320 times, predict about how many times she would pick a marble that is not striped.
Lana would pick a non-striped marble about 294 times.
The probability of picking a marble that is not striped is 100% - 8% = 92% = 0.92. This means that for each pick, the probability of getting a non-striped marble is 0.92.
If Lana picks a marble and replaces it 320 times, the number of times she would pick a non-striped marble can be predicted by multiplying the probability of getting a non-striped marble by the number of picks.
So, the number of times she would pick a non-striped marble is:
0.92 x 320 = 294.4
Rounding to the nearest whole number = 294.
To learn more about marble here:
https://brainly.com/question/16918319
#SPJ1
Consider the differential equation dy dx = 23 48 (A) Re-write the equation in terms of differentials: dy= dx LHS: RHS: (B) Now integrate each side of the equation: + C1 = = + C2 LHS: RHS: (C) Solve the equation for y, given that that y(0) = 4. Y=
The solution for the differential equation is y = (23/48) x + 4.
How to determined the ordinary differential equation?(A) Re-writing the differential equation in terms of differentials, we get:
dy = (23/48) dx
Here, dy and dx represent infinitesimal changes in the variables y and x, respectively.
(B) Integrating both sides of the equation with respect to their respective variables, we get:
∫dy = ∫(23/48)dx
On the left-hand side, the integral of dy is simply y (plus a constant of integration), while on the right-hand side, we can pull the constant factor (23/48) outside the integral:
y + C1 = (23/48) ∫dx
Integrating the right-hand side with respect to x, we get:
y + C1 = (23/48) x + C2
where C1 and C2 are constants of integration.
(C) To solve for y, we can isolate it on one side of the equation by subtracting C1 from both sides:
y = (23/48) x + (C2 - C1)
Next, we can use the initial condition y(0) = 4 to solve for the constant C2 - C1:
y(0) = (23/48) (0) + (C2 - C1) = C2 - C1
Since y(0) = 4, we have:
4 = C2 - C1
Therefore, C2 - C1 = 4, and we can substitute this back into the expression for y to get the final solution:
y = (23/48) x + 4
So the solution for the differential equation with initial condition y(0) = 4 is y = (23/48) x + 4.
Learn more about differential equation
brainly.com/question/14620493
#SPJ11
Suppose 45% of all students at aiden's school brought a can of food to contribute to a canned food drive. aiden picks a representative sample of 25 students and determines the samples percentage he expects the percentage for this sample will be 45% do you agree? explain your reasoning
A z-score of 0 means that the sample proportion is equal to the population proportion. Therefore, after using sampling distribution we can conclude that we agree with Aiden's expectation that the percentage for this sample will be 45%.
Based on the given information, we can assume that the population proportion of students who brought a can of food to contribute to the canned food drive is 0.45. Aiden picks a representative sample of 25 students, and he expects the percentage for this sample will be 45%.
We can use the sampling distribution formula to calculate the expected sample proportion:
SE = sqrt[p(1-p) / n]
where p is the population proportion, n is the sample size, and SE is the standard error.
Plugging in the values, we get:
SE = sqrt[0.45(1-0.45) / 25] = 0.0984
Next, we can use the normal distribution to find the z-score corresponding to a sample proportion of 0.45:
z = (0.45 - 0.45) / 0.0984 = 0
A z-score of 0 means that the sample proportion is equal to the population proportion. Therefore, we can conclude that we agree with Aiden's expectation that the percentage for this sample will be 45%.
To know more about sampling distribution, visit:
https://brainly.com/question/29375938#
#SPJ11
). Brooklane Ltd. Has recently appointed a new CEO of the company. The CEO has several new ideas for the organisation. One idea, which he wants to explore is the elimination of annual budgets. You are working as a management team member in this company and CEO has asked you to write a report which investigates this idea.
Question
a) Write a report for the CEO setting out the advantages and limitations of an annual budgeting system. Use academic sources to support your answer.
Part (two). The following information relates to the wards in the cardiology department of Good Health Hospital for one accounting period
Wards 1 ,2 ,3
Number of Beds 12 ,10,20
Total number of Patients 48,32, 108
Total ward staff (excluding consultants) 8, 8 ,12
Ward staff – full-time equivalent 5 ,4 ,6
Variable operating costs for period £58,000, £66,000, £98,000
Operating fixed costs £85,000 ,£67,000, £88,000
General overhead costs £40,000, £40,000, £40,000
General overhead costs are made up of recharges from support services. The total cost of £120,000 is split equally between the three wards. The hospital manager is concerned about the high costs of running the three heart-care wards. She has asked you to investigate their performance.
Question
b) Write a report which investigates the costs of operating the three hospital wards. Your report should include appropriate measures of performance for each ward and you should draw conclusions from the costs. Calculate necessary calculations to support your conclusions.
[Hint: Calculations include: Patient (turnover) per bed, FTE Staff per bed & per patients, Variable Cost per bed & per patient and Fixed cost per bed & per patient. ]
a The purpose of this report is to investigate the advantages and limitations of the annual budgeting system to determine whether the elimination of the system is a good idea.
b Report on the Advantages and Limitations of an Annual Budgeting System This report investigates the advantages and limitations of an annual budgeting system. The purpose is to assess the feasibility of eliminating the annual budgeting system at Brooklane Ltd. By analyzing academic sources, we can gain insights into the potential benefits and drawbacks of such a decision.
Advantages of an Annual Budgeting SystemThe annual budgeting system has several advantages. Firstly, it allows organizations to set financial goals and targets for the coming year. This helps organizations to allocate resources and prioritize their spending to achieve their goals.
Limitations of an Annual Budgeting System is that despite its advantages, the annual budgeting system also has limitations. Firstly, it can be time-consuming and costly to prepare, especially for larger organizations. This can divert resources from other important areas of the organization.
In conclusion, the annual budgeting system has both advantages and limitations.
Learn more about budget on
https://brainly.com/question/6663636
#SPJ4
For y=f(x) = 3x^2, find Δx, Δy, and Δy/Δx' given x1 = 1 and x2 = 5
For the function y = f(x) = 3x² the Δx is 4, Δy is 72, and Δy/Δx is 18 between x1 = 1 and x2 = 5.
To find the values of Δx, Δy, and Δy/Δx for the function y = f(x) = 3x² between x1 = 1 and x2 = 5.
Δx represents the change in x between x1 and x2,
It can be calculated as Δx = x2 - x1 = 5 - 1 = 4.
Δy represents the change in y (or the output of the function f(x)) between x1 and x2, and can be calculated as Δy = f(x2) - f(x1).
We can find the value of f(x) by substituting x = 1 and x = 5 into the equation f(x) = 3x²:
f(1) = 3(1)² = 3
f(5) = 3(5)² = 75
Therefore, Δy = f(x2) - f(x1) = 75 - 3 = 72.
Δy/Δx represents the average rate of change of y with respect to x between x1 and x2,
It can be calculated as Δy/Δx' = [f(x2) - f(x1)] / [x2 - x1].
We can substitute the values of Δy and Δx into this equation to get:
Δy/Δx' = [f(x2) - f(x1)] / [x2 - x1] = [75 - 3] / (5 - 1) = 72 / 4 = 18.
Therefore, the values of Δx, Δy, and Δy/Δx are 4, 72, and 18, respectively.
To practice more questions on derivatives:
https://brainly.com/question/23819325
#SPJ11
The length of one diagonal in a rhombus is 26. 4 cm and the area of the rhombus is 204. 6 cm squared. How long is the second diagonal?
A rhombus with a diagonal of 26.4 cm and an area of 204.6 square cm has another diagonal of length 15.5 cm
Rhombus is a 2-Dimensional shape. It is a quadrilateral. It is a specialized form of a parallelogram. All sides of a rhombus are equal in length.
Similar to a parallelogram, it has opposite sides parallel to each other and opposite angles of equal magnitude.
The area of a rhombus is expressed as half of the product of diagonals.
A = 0.5pq
A is the area
p is the length of one diagonal
q is the length of another diagonal
A = 204.6 square cm
p = 26.4 cm
204.6 = 0.5 * 26.4 * q
q = 15.5 cm
Learn more about Rhombus:
https://brainly.com/question/29629002
#SPJ4
the dimensions of a rectangular prism are shown on the map below. which of the following is closest to the total surface area of the figure?
How do you solve and set up?
The total surface area of the figure shown as a rectangular prism is 208. 6 cm
How to determine the total surface areaThe formula for calculating the total surface area of a rectangular prism is expressed as;
TSA = 2 (lh +wh + lw )
Such that the parameters are;
l is the lengthw is the widthh is the heightNow, substitute the values, we have;
TSA = 2(2(9) + 7.9(9) + 2(7.6)
expand the bracket, we have;
TSA = 2(18 + 71.1 + 15.2)
add the values
TSA = 2(104. 3)
TSA = 208. 6
Learn about rectangular prism at: https://brainly.com/question/24284033
#SPJ1
A triangular roof is built so that its height is half its base. If the base of the roof is 32 feet long, what is the area of the roof?
If the base of the roof is 32 feet long, then the area of the triangular roof is 256 square feet.
In the given scenario, we are provided with information about a triangular roof. It is mentioned that the base of the roof is 32 feet long, and we need to determine the area of the triangular roof.
To calculate the area of a triangle, we need to know the length of the base and the height. In this case, we are given that the height is half the length of the base, which can be expressed as h = (1/2) * b.
Since we are given that the base length, b, is 32 feet, we can substitute this value into the height equation to find the height of the triangle: h = (1/2) * 32 feet = 16 feet.
Now that we have the base length (b = 32 feet) and the height (h = 16 feet), we can use the formula for the area of a triangle: A = (1/2) * b * h.
Substituting the values, we have A = (1/2) * 32 feet * 16 feet = 256 square feet.
Therefore, the area of the triangular roof is determined to be 256 square feet. This represents the amount of surface area covered by the triangular section of the roof.
Let the base of the triangular roof be denoted by b, and its height be denoted by h. We are given that
h = (1/2) * b, and that
b = 32 feet.
We can use this information to find the area A of the roof as follows:
A = (1/2) * b * h
= (1/2) * 32 feet * (1/2) * 32 feet
= 256 square feet
Therefore, the area of the triangular roof is 256 square feet.
To know more about area refer to
https://brainly.com/question/25292087
#SPJ11
Question number 5. What is the relation called
Answer:
This relation is a function.
Algebraically, this function is written as
y = 5x.
Holly cuts 6 ribbons into fifths for a craft project.
1
how many --size ribbons does she have?
5
holly has
one-fifth-size ribbons.
If Holly cuts 6 ribbons into fifths for her craft project, after cutting, she has a total of 30 one-fifth-size ribbons (6 ribbons x 5 cuts each).
Holly has cut 6 ribbons into fifths for her craft project. This means that she has a total of 30 ribbons, each with a size of one-fifth. To understand this better, we can break it down into fractions. Each ribbon is one-fifth of a whole ribbon, and since Holly has cut 6 ribbons, she has 6 times one-fifth, which equals 30. So, to answer the question, Holly has 30 ribbons, each with a size of one-fifth. These ribbons can be used for various crafts, such as creating bows, wrapping presents, or decorating cards. The possibilities are endless, and with 30 ribbons, Holly can get creative and make a lot of beautiful crafts.
More on ribbons: https://brainly.com/question/30145956
#SPJ11
can someone help? asking for a friend (literally) I’d really appreciate it!
The graphs of the sinusoidal function for the question 1 to 4 created with MS Excel are attached
5. The function is; y = cos(θ) + 2
6. The function is; y = sin(2·θ) - 4
What is a sinusoidal function?A sinusoidal function is a smooth periodic or repetitive function based on the sine or cosine of an angle.
The equations for the graphs in the sinusoidal function indicates that we get;
The period = 2·π/B
The horizontal shift = -C/B
The vertical shift = D
Where;
B = The coefficient of the angle, θ
C = The constant within the parenthesis
D = The constant term outside the sine or cosine function parenthesis
1. y = 2·sin(2·θ + 1)
The function indicates that the amplitude is 2, the period is 2·π/2 = π, the vertical shift is 0, and the horizontal shift is -1/2
Please find attached the graph of the function, created with MS Excel
2. y = -cos(θ) - 2
The amplitude is 1
The period is 2·π
The horizontal shift is 0
The vertical shift is -2
Please find attached the graph of the function y = -cos(θ) - 2, created with ms Excel
3. y = 4·cos(3·θ -2)
The amplitude is 4
The period is 2·π/3
The horizontal shift is 0
The vertical shift is -2
Please find attached the graph of the function y = 4·cos(3·θ -2), created with MS Excel
4. y = 3·sin(6·θ) - 1
The amplitude is 3
The period is π/3
The horizontal shift is 0
The vertical shift is -1
Please find attached the graph of the function y = 3·sin(6·θ) - 1, created with MS Excel
5. The points on the graph are;
Peak; (0, 3)
The next adjacent trough; (180, 1)
The adjacent peak; (360, 3)
Therefore;
The amplitude is 1
The period is 360°
The horizontal shift is 2
The vertical shift is 0
The peak point at θ = 0, indicates;
The function is; y = cos(θ) + 2
6. The points on the graph are;
Peak; (45, -3)
The next adjacent trough; (135, -5)
The adjacent peak; (225, -3)
Therefore;
The amplitude is 1
The period is 180 = π radians
The horizontal shift is 0
The vertical shift is -4
The function is; y = sin(2·θ) - 4
Learn more on sinusoidal functions here: https://brainly.com/question/2410297
#SPJ1
Jack's bill at a restaurant came to $51.31 he wants to leave a 15% tip how much will the new total be including tip
The new total bill including the tip of 15% is $59.01.
Calculating the new bill including the tipTo find the amount of the tip, we can multiply the total bill by the percentage as a decimal:
tip = 0.15 * $51.31 = $7.70
To find the new total including the tip, we can add the tip to the original bill:
new total = $51.31 + $7.70 = $59.01
So the new total, including a 15% tip, will be $59.01.
Read more about sales tax at
https://brainly.com/question/9437038
#SPJ1
The second number is five more than the first number. The sum of three times the first and double the second number is 30. Find the numbers.
Answer:
x = 4 and y = 9
Step-by-step explanation:
Let x and y be the two numbers. Also,
Let the first number be x and the second number be y.
Converting the word expressions to an equation we get:
y = x + 5
3x + 2y = 30
Only thing left is to substitute y = x + 5 into the second equation
3x + 2y = 30
3x + 2(x + 5) = 30 (substituting y as x + 5)
3x + 2x + 10 = 30 (multiplying by both x and 5)
5x = 30 - 10 (collecting like terms to one side)
5x = 20
[tex]\frac{5x}{5} = \frac{20}{5}[/tex] (divide both sides by 5 to get the value of x)
x = 4
Now that we know the value of x, we can find y.
y = x + 5
y = 4 + 5
y = 9
If you want to make sure your answer is correct, substitute x and y into the equation.
3x + 2y = 30
3(4) + 2(9) = 30
12 + 18 = 30
30 = 30
Select all the tables that show quadratic functions.
(select all that apply.)
To select all the tables that show quadratic functions, look for tables with a second-degree polynomial equation in the form of "y = ax² + bx + c".
Which of the following tables display a quadratic function in the form of "y = ax² + bx + c"?Tables that show quadratic functions:
(a).
x y
-2 8
-1 3
0 0
1 1
2 4
This table shows a quadratic function in the form of y = x² - 2x.
(b)
x y
-3 0
-2 1
-1 4
0 9
1 16
2 25
3 36
This table shows a quadratic function in the form of y = x².
A quadratic function is a second-degree polynomial function that can be expressed in the general form of "y = ax² + bx + c", where a, b, and c are constants.
In this form, the variable "x" is squared, and the coefficient "a" determines whether the parabola opens upward or downward.
To identify tables that show quadratic functions, we need to look for tables that display data points that follow a quadratic pattern.
That is, the dependent variable (y) changes in a way that corresponds to a quadratic equation.
In the first table, the values of y correspond to the quadratic equation y = x² - 2x. The second table shows a set of data points that corresponds to the quadratic function y = x².
Therefore, these two tables show quadratic functions.
Learn more about quadratic functions
brainly.com/question/30929439
#SPJ11
Find the mass and center of mass of the lamina that occupies the region D and has the given density function p. D is bounded by y = e, y = 0, x = 0, and x = 1; p(x, y) = 31y
The mass of the lamina that occupies the region D is 31/2 units and the center of mass is located at (1/2, 2/e).
We can find the mass of the lamina by integrating the density function over the region D:
m = ∫∫D p(x,y) dA
where dA is the area element in polar coordinates, which is equal to r dr dθ. The region D can be described as 0 ≤ x ≤ 1 and 0 ≤ y ≤ e, so the integral becomes:
m = ∫0^1 ∫0^e 31y dy dx
Solving the integral, we get:
m = 31/2
To find the center of mass, we need to find the x-coordinate and y-coordinate separately:
x = (1/m) ∫∫D x p(x,y) dA
y = (1/m) ∫∫D y p(x,y) dA
For the x-coordinate, we have:
x = (1/m) ∫0^1 ∫0^e x(31y) dy dx
Simplifying, we get:
x = (1/m) ∫0^1 31/2 x dx
x = 1/2
For the y-coordinate, we have:
y = (1/m) ∫0^1 ∫0^e y(31y) dy dx
Simplifying, we get:
y = (1/m) ∫0^1 31/3 e^3 dx
y = (2/e)
Therefore, the center of mass is located at (1/2, 2/e).
For more questions like Function click the link below:
https://brainly.com/question/16008229
#SPJ11
A 100 g blackbird is flying with a speed of 12 m/s directly toward a 30 g bluebird, who is flying in the opposite direction at a speed of 40 m/s
Answer: 0 g * m/s
Step-by-step explanation:
You first want to multiply 100g, by 12 m/s. This gives you the momentum of the first bird, the answer being 1200 g * m/s
Second, You was to multiply 30g, by 40 m/s. This gives you the momentum of the second bird, The answer also being 1200 g * m/s.
Then, subtract The final answers, and you get 0 g * m/s.
=(100 g)(12 m/s)+(30 g)(−40 m/s)
=1200 g⋅ m/s+(−1200 g⋅ m/s)
=0 g⋅ m/s
I am not an expert, so I may have gotten some things incorrect.
If this doesn't make sense please consult an expert :,)
The relative speed of the birds is 52 m/s.
We are given that;
Number of blackbirds= 100g
Speed= 12m/s
Now,
The relative speed of the blackbird as seen by the bluebird is:
vblackbird relative to bluebird=vblackbird−vbluebird
vblackbird relative to bluebird=−12−40
vblackbird relative to bluebird=−52 m/s
This means that the blackbird is moving to the left at 52 m/s as seen by the bluebird. The relative speed of the bluebird as seen by the blackbird is:
vbluebird relative to blackbird=vbluebird−vblackbird
vbluebird relative to blackbird=40−(−12)
vbluebird relative to blackbird=52 m/s
This means that the bluebird is moving to the right at 52 m/s as seen by the blackbird. The relative speed of either bird is equal to the magnitude (absolute value) of their relative velocity.
Therefore, by the speed the answer will be 52 m/s.
Learn more about speed here;
https://brainly.com/question/7359669
#SPJ1
Gebhardt Electronics produces a wide variety of transformers that it sells directly to manufacturers of electronics equipment. For one component used in several models of its transformers, Gebhardt uses a 3-foot length of. 20 mm diameter solid wire made of pure Oxygen-Free Electronic (OFE) copper. A flaw in the wire reduces its conductivity and increases the likelihood it will break, and this critical component is difficult to reach and repair after a transformer has been constructed. Therefore, Gebhardt wants to use primarily flawless lengths of wire in making this component. The company is willing to accept n more than a l in 20 chance that a 3-foot length taken from a spool will be flawless. Gebhardt also occasionally uses smaller pieces of the same wire in the manufacture of other compo- nents, so the 3-foot segments to be used for this component are essentially taken randomly from a long spool of. 20 mm diameter solid OFE copper wire Gebhardt is now considering a new supplier for copper wire. This supplier claims that its spools of. 20 mm diameter solid OFE copper wire average 50 inches between flaws. Gebhardt now must determine whether the new supply will be satisfactory if the supplier's claim is valid. Managerial Report In making this assessment for Gebhardt Electronics, consider the following three questions:
1. If the new supplier does provide spools of. 20 mm solid OFE copper wire that aver age 50 inches between flaws, how is the length of wire between two consecutive flaws distributed?
2. Using the probability distribution you identified in (I), what is the probability that Gebhardt's criteria will be met (i. E. , a l in 20 chance that a randomly selected 3-foot segment of wire provided by the new supplier will be flawless)
3. In inches, what is the minimum mean length between consecutive flaws that would result in satisfaction of Gebhardt's criteria
4. In inches, what is the minimum mean length between consecutive flaws that would result in a l in 100 chance that a randomly selected 3-foot segment of wire provided by the new supplier will be flawless?
we need to determine the minimum mean length between consecutive flaws that would result in a 1 in 100 chance that a randomly selected 3-foot segment of wire provided by the new supplier will be flawless.
First, we need to convert the length of the wire provided by the new supplier (50 inches) into feet, which is 4.17 feet (50 inches divided by 12).
Next, we can use the Poisson distribution formula to calculate the probability of getting at least one flaw in a 3-foot segment of wire:
P(X >= 1) = 1 - e^(-λ)
Where X is the number of flaws in a 3-foot segment, and λ is the mean number of flaws per 3-foot segment.
Since the supplier claims that the average length between flaws is 4.17 feet, we can calculate λ as:
λ = 1/4.17 = 0.239
Now, we can plug in the values and solve for the probability:
P(X >= 1) = 1 - e^(-0.239) = 0.208
This means that there is a 20.8% chance of getting at least one flaw in a 3-foot segment of wire provided by the new supplier.
To find the minimum mean length between consecutive flaws that would result in a 1 in 100 (or 0.01) chance of getting a flawless 3-foot segment, we can rearrange the Poisson formula:
P(X = 0) = e^(-λ)
0.01 = e^(-λ)
ln(0.01) = -λ
λ = 4.605
This means that the mean length between consecutive flaws would need to be at least 4.605 feet (55.26 inches) in order to have a 1 in 100 chance of getting a flawless 3-foot segment from the new supplier.
In conclusion, if the new supplier's claim is valid and the mean length between consecutive flaws is at least 55.26 inches, then Gebhardt Electronics can expect to get a flawless 3-foot segment of wire with a 1 in 100 probability.
To know more about Gebhardt refer here
https://brainly.com/question/28445889#
#SPJ11
Brainliest for the one who answers first!
The measure of an angle is 90.4°. What is the measure of its supplementary angle?
Answer:
89.6°
Step-by-step explanation:
180-90.4=89.6°
Answer: 89.6
Step-by-step explanation:
Supplementary means angles adding up to 180
180-90.4 = x
x=89.6 this is your supplemental angle
Select the statement that correctly describes the relationship for angles of an inscribed quadrilateral. (10pts pls help)
The opposite angles in an inscribed quadrilateral are supplementary, meaning their sum is 180 degrees.
What is the relationship between the angles of an inscribed quadrilateral, and how related to each other?An inscribed quadrilateral is a quadrilateral whose vertices all lie on a circle. Let's label the vertices of the quadrilateral as A, B, C, and D, in clockwise order.
Draw the circle that contains all four vertices, and label the center of the circle as O.
Now, draw chords AC and BD that cross at point P. Each chord divides the quadrilateral into two triangles. Notice that angle AOC and angle BOD are both central angles that subtend the same arc, CD.
Therefore, these angles have the same measure, and we can write:
angle AOC = angle BOD = x
Similarly, we can show that angle AOB = angle COD = y.
Now, consider the two triangles APC and BPD. These triangles share the side P D and have the same angle APD, which is equal to angle AOC + angle BOD, or 2x.
Therefore, by the angle-sum property of triangles, the other angles in each triangle must also be equal. We can write:
angle APC = angle BPD = (180 - 2x)/2 = 90 - x
Similarly, consider the two triangles APB and CPD. These triangles share the side P C and have the same angle APC, which we just found to be 90 - x.
Therefore, by the angle-sum property of triangles, the other angles in each triangle must also be equal. We can write:
angle APB = angle CPD = (180 - (90 - x))/2 = 90 + x/2
Finally, notice that angle APB + angle CPD = (90 + x/2) + (90 - x/2) = 180, so the opposite angles in the quadrilateral are indeed supplementary.
Therefore, the main answer is: The opposite angles in an inscribed quadrilateral are supplementary, meaning their sum is 180 degrees.
Learn more about inscribed quadrilateral
brainly.com/question/12165606
#SPJ11
A. name 3 different angles which could have a reference angle of 20 degrees. how did you arrive at this answer?.
b. what are the characteristics of a reference angle?
c. how is it possible that angles can have different measurements, but still have the exact same reference angle?
A) The acute angles equivalent to 70 degrees, 110 degrees, and 250 degrees are all 20 degrees.
B) The characteristics of a reference angle is acute and positive.
C) Because reference angle only depends on quadrant.
A. Three different angles which could have a reference angle of 20 degrees are 70 degrees, 110 degrees, and 250 degrees. To arrive at this answer, we need to subtract 20 degrees from 90 degrees, which gives us 70 degrees. To find the other two angles, we add 180 degrees to 70 degrees, which gives us 250 degrees, and we subtract 180 degrees from 110 degrees, which gives us 290 degrees. However, since we're looking for angles with a reference angle of 20 degrees, we have to find the acute angle between 0 and 90 degrees that is equivalent to these angles. So, we subtract 90 degrees from 250 degrees, which gives us 160 degrees, and we subtract 90 degrees from 290 degrees, which gives us 200 degrees. The acute angles equivalent to 70 degrees, 110 degrees, and 250 degrees are all 20 degrees.
B. The characteristics of a reference angle are that it is always an acute angle, it is the smallest angle between the terminal side of the given angle and the x-axis, and it is always positive.
C. Angles can have different measurements but still have the exact same reference angle because the reference angle only depends on the quadrant in which the terminal side of the angle lies. For example, an angle of 50 degrees and an angle of 310 degrees are both in the fourth quadrant and therefore have the same reference angle of 40 degrees. Similarly, an angle of 100 degrees and an angle of 260 degrees are both in the third quadrant and therefore have the same reference angle of 10 degrees.
To learn more about reference angle
https://brainly.com/question/15069329
#SPJ11
PLEASE ANSWER ASAPPP!!!!!
Using the following equation, find the center and radius:
x2 − 4x + y2 + 8y = −4
The center is located at (−2, −4), and the radius is 4.
The center is located at (2, −4), and the radius is 4.
The center is located at (−2, −4), and the radius is 16.
The center is located at (2, −4), and the radius is 16
The center is located at (2, −4), and the radius is 4.
To find the center and radius of this equation, we need to complete the square for both the x and y terms.
Starting with the x terms:
x^2 - 4x
To complete the square, we need to add and subtract (4/2)^2 = 4:
x^2 - 4x + 4 - 4
Now we can simplify:
(x - 2)^2 - 4
And for the y terms:
y^2 + 8y
We need to add and subtract (8/2)^2 = 16:
y^2 + 8y + 16 - 16
Simplifying:
(y + 4)^2 - 16
Now we can rewrite the original equation:
(x - 2)^2 - 4 + (y + 4)^2 - 16 = -4
Combining like terms:
(x - 2)^2 + (y + 4)^2 = 4
This is in the form of a circle:
(x - h)^2 + (y - k)^2 = r^2
Where the center is (h, k) and the radius is r.
So the center is located at (2, -4) and the radius is 4.
Learn more about equation,
https://brainly.com/question/2972832
#SPJ11
2 1/7 x 4.3 (repeating the three)
write as a mixed number in simplest form
2 1/7 x 4.3 (repeating the three) as a mixed number in simplest form is 9 2/7.
First, we can simplify the mixed number 4.3 (repeating the three) as follows:
Let x = 4.3 (repeating the three)
Then 10x = 43.33333...
Subtracting x from 10x, we get:
10x - x = 43.33333... - 4.33333...
9x = 39
x = 4.33333... / 9
x = 4 1/3
Now, we can multiply 2 1/7 by 4 1/3:
2 1/7 x 4 1/3 = (15/7) x (13/3)
= (15 x 13) / (7 x 3)
= 195 / 21
To write this as a mixed number in simplest form, we can divide 195 by 21 and write the quotient as a mixed number:
195 ÷ 21 = 9 with a remainder of 6
So, 195 / 21 = 9 6/21, which can be simplified to 9 2/7.
Therefore, 2 1/7 x 4.3 (repeating the three) as a mixed number in simplest form is 9 2/7.
To know more about mixed number refer here:
https://brainly.com/question/24137171
#SPJ11
C. What part of the federal reserve’s congressional mandate does this scenario trigger (price stability and maximum sustainable employment
In the scenario you mentioned, the part of the Federal Reserve's congressional mandate that is triggered is both price stability and maximum sustainable employment.
The Federal Reserve has a dual mandate from Congress which consists of:
1. Price stability: This objective aims to maintain a stable inflation rate, ensuring that the purchasing power of money remains relatively constant over time. Price stability helps households and businesses make informed decisions regarding investments and consumption.
2. Maximum sustainable employment: This objective focuses on maintaining a high level of employment while avoiding unsustainable economic growth that could lead to high inflation. Achieving maximum sustainable employment involves minimizing unemployment while not causing inflation to rise significantly.
In the scenario you mentioned, the Federal Reserve would need to carefully balance its monetary policy to ensure that both objectives, price stability and maximum sustainable employment, are achieved. This might involve adjusting interest rates or using other monetary policy tools to influence economic activity, employment levels, and inflation.
To know more about "Federal Reserve' refer here:
https://brainly.com/question/19273629#
#SPJ11
