Two students in a chemistry lab start a particular lab with 1. 23 g of aluminum. They react it with excess sulfuric acid to produce aluminum sulfate. If they produce 3. 00 g of aluminum sulfate what is their percent yield

Answers

Answer 1

The percent yield for the reaction of 1.23 g of aluminum with excess sulfuric acid to produce 3.00 g of aluminum sulfate is 38.46%.

To find the percent yield for the reaction of aluminum with sulfuric acid to produce aluminum sulfate, you need to follow these steps:

1. Write the balanced chemical equation for the reaction:
2 Al + 3 H₂SO₄ → Al₂(SO₄)₃ + 3 H₂

2. Calculate the molar mass of aluminum (Al) and aluminum sulfate (Al₂(SO₄)₃):
Al: 26.98 g/mol
Al₂(SO₄)₃: (2 × 26.98) + (3 × [4 × 16.00 + 32.07]) = 53.96 + 342.15 = 342.15 g/mol

3. Determine the moles of aluminum used in the reaction:
moles of Al = mass of Al / molar mass of Al = 1.23 g / 26.98 g/mol = 0.0456 mol

4. Calculate the theoretical yield of aluminum sulfate based on the moles of aluminum:
moles of Al₂(SO₄)₃ = 0.0456 mol Al × (1 mol Al₂(SO₄)₃ / 2 mol Al) = 0.0228 mol Al₂(SO₄)₃
mass of Al₂(SO₄)₃ = moles of Al₂(SO₄)₃ × molar mass of Al₂(SO₄)₃ = 0.0228 mol × 342.15 g/mol = 7.80 g (theoretical yield)

5. Calculate the percent yield:
percent yield = (actual yield / theoretical yield) × 100% = (3.00 g / 7.80 g) × 100% = 38.46%

So, the percent yield for the reaction of 1.23 g of aluminum with excess sulfuric acid to produce 3.00 g of aluminum sulfate is 38.46%.

To know more about molar mass :

https://brainly.com/question/20552052

#SPJ11


Related Questions

Calculate the mass of iron that releases 2432 J of energy as its temperture rises from 25. 0 degrees * C to 87. 0 degrees * C. (The specific heat of iron is 0. 448 J/g^ C)

Answers

To solve this problem, we can use the formula:

q = m * c * ΔT

where q is the heat energy absorbed or released, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

We know that the heat energy released by the iron is 2432 J, the specific heat capacity of iron is 0.448 J/g°C, the initial temperature of the iron is 25.0°C, and the final temperature of the iron is 87.0°C.

The mass of iron that releases 2432 J of energy as its temperature rises from 25.0°C to 87.0°C is 96.2 g.

Substituting the values in the formula, we get:

2432 J = m * 0.448 J/g°C * (87.0°C - 25.0°C)

Simplifying the equation, we get:

m = 2432 J / (0.448 J/g°C * 62.0°C)

m = 96.2 g

Therefore, the mass of iron that releases 2432 J of energy as its temperature rises from 25.0°C to 87.0°C is 96.2 g.

To know more about temperature rise refer here:

https://brainly.com/question/2006890

#SPJ11

A spiderweb and a kevlar jacket have some obvious differences. Which property is similar between the web and the jacket?.

Answers

One property that is similar between a spiderweb and a Kevlar jacket is their tensile strength.

Tensile strength is the ability of a material to resist breaking under tension or stretching.

Spider silk is known to be one of the strongest natural fibers, with a tensile strength comparable to steel. Kevlar is a synthetic polymer that is widely used in body armor, ropes, and other products that require high strength-to-weight ratios.

Kevlar has a tensile strength five times stronger than steel, making it an ideal material for applications where high strength and durability are required.

Both spider silk and Kevlar are known for their remarkable strength, and their ability to withstand tensile forces, making them highly desirable for use in a variety of applications where strength and durability are essential.

To know more about spiderweb refer to-

https://brainly.com/question/18880314

#SPJ11

What happens in a decomposition reaction? A. Two ions trade places. B. Two substances combine to form one substance. C. The charges of the atoms change. D. Compounds break down into smaller compounds.​

Answers

A single compound decomposes into two or more smaller compounds or components during a decomposition reaction. Option D

A number of mechanisms, such as heat, light, or the addition of another molecule, can cause this. A significant quantity of potential energy is often held in the chemical bonds of the reactant component, and this energy is released during the reaction.

For instance, hydrogen peroxide's typical breakdown reaction involves the molecule dissolving into water and oxygen gas:

[tex]2H_2O_2 \rightarrow 2 H_2O + O_2[/tex]

The heat breakdown of calcium carbonate to produce calcium oxide and carbon dioxide gas is another illustration:

[tex]CaO + CO_2 = CaCO_3[/tex]

Decomposition reactions are crucial components of several chemical processes in both nature and industry. They are characterised by the dissolution of bigger molecules into smaller ones. Option D

For more such questions on Decomposition reactions

https://brainly.com/question/14608831

A compound is made up of 94. 5 g of aluminum and 199. 5 g or fluorine. Determine the empirical formula of the compound.



HELPPPP

Answers

The empirical formula of a compound made up of 94.5 g of aluminum and 199.5 g of fluorine is AlF₃.

To determine the empirical formula of the compound, we need to first calculate the moles of each element present in the sample.

Moles of aluminum = 94.5 g / 26.98 g/mol = 3.50 mol

Moles of fluorine = 199.5 g / 18.99 g/mol = 10.51 mol

Next, we need to determine the smallest whole number ratio between these two values.

Dividing both values by 3.50, we get:

Moles of aluminum = 1

Moles of fluorine = 3

Therefore, the empirical formula of the compound is AlF₃.

To know more about the empirical formula refer here :

https://brainly.com/question/14425592#

#SPJ11

What volume of nitrogen reacts with 33. 6 litres of oxygen to produce nitrogen

dioxide

Answers

The balanced chemical equation for the reaction of nitrogen and oxygen to produce nitrogen dioxide is:

2NO + O2 → 2NO2

According to the equation, 1 mole of nitrogen reacts with 0.5 moles of oxygen to produce 1 mole of nitrogen dioxide.

To determine the volume of nitrogen required to react with 33.6 L of oxygen, we need to convert the volume of oxygen to moles, and then use the mole ratio to find the moles of nitrogen required, and finally convert to volume of nitrogen.

Using the ideal gas law, we can convert the given volume of oxygen to moles:

n(O2) = PV/RT

where P is the pressure, V is the volume, R is the gas constant, and T is the temperature in Kelvin.

Assuming standard temperature and pressure (STP) conditions of 1 atm and 273 K, we get:

n(O2) = (1 atm) × (33.6 L) / [(0.0821 L·atm/mol·K) × (273 K)] = 1.37 moles of O2

Using the mole ratio from the balanced chemical equation, we know that 2 moles of NO react with 1 mole of O2. So the number of moles of NO required to react with 1.37 moles of O2 is:

n(NO) = 2 × (1.37 moles of O2) = 2.74 moles of NO

Finally, we can convert the moles of NO to volume using the ideal gas law:

V(NO) = n(NO)RT/P

Assuming STP conditions again, we get:

V(NO) = (2.74 mol) × (0.0821 L·atm/mol·K) × (273 K) / (1 atm) ≈ 60.4 L

Therefore, approximately 60.4 L of nitrogen would be required to react with 33.6 L of oxygen to produce nitrogen dioxide, under the given conditions.

To know more about chemical refer here

https://brainly.com/question/29240183#

#SPJ11

how does backbone help?​

Answers

Answer:

Backbone help us to be straight ,walk ,sleep etc

Explanation:

Backbone is the part of human body which is located back of our body.

It effort helps us to be straight do various work

The spine or the backbone is the central structure of the vertebrate body and it serves a few imperative capacities:

Bolster: The spine gives bolster for the body and makes a difference keep up its shape.Security: The spine encases and ensures the spinal rope, which is mindful for transmitting signals between the brain and the rest of the body.Connection: Muscles, tendons, and ligaments join to the spine, permitting for development and giving steadiness.Blood cell generation: The springy tissue interior a few of the bones of the spine produces ruddy and white blood cells.Mineral capacity: The bones of the spine store minerals such as calcium and phosphorus, which are imperative for bone quality and other substantial capacities. 

To know more about backbone,

https://brainly.com/question/30052045

flew by Mercury in 1974; took photographs, temperature readings, and gathered atmosphere information; sent the information back to earth through radio waves

Answers

In 1974, the 1973-launched Mariner 10 spacecraft made history by flying by Mercury for the first time.

What is spacecraft?

A vehicle made specifically for space travel is a spaceship. It can encompass both spacecraft made for study, observation, and the deployment of satellites and other payloads as well as those made for human exploration, communication, and transportation. They typically consist of a propulsion system, navigation system, communications system, and numerous payloads, among other things. Typically, a spacecraft needs a launch vehicle to get off the ground and a re-entry mechanism to land safely.

It recorded temperature readings, snapped pictures, and gathered data on the planet's atmosphere during its flyby. Then, radio waves were used to transmit all of this data back to Earth. The mission was a great success and revealed a tonne of fresh Mercury-related data.

To learn more about spacecraft, visit:

brainly.com/question/29383012

#SPJ1

The complete question is,

passed past Mercury in 1974, taking pictures, measuring temperatures, and gathering data on the atmosphere before radio-transmitting the data back to Earth.

PLEASE HELP
Andrea plans to go fishing in the morning, so she checks the weather forecast. The forecast shows a high-pressure area forming near her fishing spot. Using the weather data below, predict the possible weather conditions for Andrea’s trip.

Time (a.m.) Temperature (°C) Pressure (mb)
7.00 14 995
8.00 14 1001
9.00 14 1113
10.00 15 1120
A.
cloudy skies with minimal precipitation
B.
clear skies with minimal precipitation
C.
cloudy skies with moderate precipitation
D.
clear skies with heavy precipitation

Answers

B Answer:

Explanation:

Higher, 1020 mb +, rising pressure and temp are associated with clear skies and low precipitation

Based on the weather data provided, it is likely that Andrea will experience clear skies with minimal precipitation during her fishing trip.

This is because the temperature remains fairly consistent throughout the morning, indicating that there is no significant weather front moving through the area. Additionally, the pressure readings show a high-pressure area forming, which typically indicates stable weather conditions with clear skies and little chance of precipitation.

Therefore, the answer is option B: clear skies with minimal precipitation.

Would you expect a C8 molecule to boil at a higher or lower temperature than a C24 molecule?​

Answers

I would expect a C24 molecule to boil at a higher temperature than a C8 molecule.

What is the temperature  about?

The boiling point of a molecule depends on the strength of intermolecular forces between the individual molecules. Intermolecular forces are forces that exist between molecules and they include dipole-dipole forces, hydrogen bonding, London dispersion forces, and ion-dipole forces.

This is because the boiling point of a molecule is directly related to its size and the strength of its intermolecular forces. A larger molecule such as C24 has more electrons and a larger surface area, which results in stronger intermolecular forces such as London dispersion forces.

These stronger forces require more energy to be overcome and thus result in a higher boiling point. In contrast, a smaller molecule such as C8 has weaker intermolecular forces and requires less energy to overcome them, resulting in a lower boiling point.

Read more about temperature  here:

https://brainly.com/question/25677592

#SPJ1

A gas occupies 37. 5 mL at 102. 3 kPa. At 27. 5 mL, what will the pressure be?

Answers

A gas has an initial volume of 37.5 mL at a pressure of 102.3 kPa. When the volume decreases to 27.5 mL, the pressure increases to 139.8 kPa.

This question can be solved using Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature. Therefore, we can use the equation P1V1 = P2V2, where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume.

Substituting the given values into the equation, we get:

P1V1 = P2V2

(102.3 kPa)(37.5 mL) = P2(27.5 mL)

Solving for P2, we get:

P2 = (102.3 kPa)(37.5 mL) / 27.5 mL

P2 = 139.32 kPa

Therefore, the pressure of the gas when its volume is 27.5 mL will be 139.32 kPa.

To know more about the Boyle's Law refer here :

https://brainly.com/question/30367067#

#SPJ11

Counting Atoms and Elements in a Chemical Formula (8. 5D)

Answers

For example, the chemical formula for water is H₂O. This tells us that there are two hydrogen atoms (H) and one oxygen atom (O) in each molecule of water. To count the number of atoms in a chemical formula, we can use the subscripts (the numbers that come after each element symbol) to determine how many atoms of each element are present. For example, in the chemical formula NaCl (which represents salt), there is one sodium (Na) atom and one chlorine (Cl) atom in each molecule.

Let us discuss this in detail. To count atoms and elements in a chemical formula, you need to understand the following terms:

- Atoms: The basic unit of a chemical element, consisting of protons, neutrons, and electrons.
- Elements: A substance that cannot be broken down into simpler substances, consisting of only one type of atom.
- Chemical Formula: A representation of a substance using symbols for its constituent elements and numbers to indicate the ratio of atoms in the compound.

Now, let's count the atoms and elements in a given chemical formula, for example, H₂O (water):

1. Identify the elements in the formula: In this case, we have two elements - Hydrogen (H) and Oxygen (O).
2. Count the atoms of each element: The subscript number next to each element symbol indicates the number of atoms of that element in the compound. For Hydrogen (H), the subscript is 2, meaning there are 2 Hydrogen atoms. For Oxygen (O), there is no subscript, which means there is only 1 Oxygen atom (when no subscript is present, it is understood to be 1).

So, in the chemical formula H₂O, there are 2 Hydrogen atoms and 1 Oxygen atom, for a total of 3 atoms.

Learn more about chemical formulas at https://brainly.com/question/11574373

#SPJ11

7. 50 mL of an acetic acid (CH3CO2H, 60. 05 g/mole) stock solution was added to an analyte flask, along with 15 mL of water. 14. 36 mL of 0. 0915 M NaOH titrant was required to titrate the analyte solution to the endpoint. Calculate the concentration of the stock solution. Watch significant figures

Answers

The concentration of the acetic acid stock solution is 0.026259 M, considering significant figures.

To solve this problem, we first need to write out the balanced chemical equation for the reaction between acetic acid (CH₃CO₂H) and sodium hydroxide (NaOH):

CH₃CO₂H + NaOH → CH₃CO₂Na + H₂O

We can see from this equation that the stoichiometry of the reaction is 1:1 - that is, one mole of acetic acid reacts with one mole of NaOH. We also know that the volume of the analyte solution is 50 mL + 15 mL = 65 mL.

Next, we need to use the volume and concentration of the NaOH titrant to calculate the number of moles of NaOH that were added to the analyte solution:

V1 = 14.36 mL = 0.01436 L (convert mL to L)
C1 = 0.0915 M

n(NaOH) = V1 x C1 = 0.01436 L x 0.0915 mol/L = 0.00131294 mol

Since the stoichiometry of the reaction is 1:1, we know that this is also the number of moles of acetic acid that were present in the analyte solution. We can use this information to calculate the concentration of the stock solution:

n(CH₃CO₂H) = n(NaOH) = 0.00131294 mol
V2 = 50 mL = 0.05 L (convert mL to L)

M = n/V = 0.00131294 mol / 0.05 L = 0.026259 M

So the concentration of the acetic acid stock solution is 0.026259 M.

Learn more about stock solutions at https://brainly.com/question/3942978

#SPJ11

The Si unit of hurtz equals one wave passing a fixed point in one _____

Answers

The Si unit of Hertz (Hz) represents the frequency of a wave, which is defined as the number of complete cycles of a wave passing a fixed point per second.

In other words, one Hertz equals one wave passing a fixed point in one second. This unit is commonly used to measure the frequency of various types of waves, including sound waves, electromagnetic waves, and radio waves.

For example, if a sound wave has a frequency of 440 Hz, it means that the sound wave completes 440 cycles of compression and rarefaction (the peaks and troughs of the wave) per second. Similarly, if a radio wave has a frequency of 100 MHz (megahertz), it means that the wave completes 100 million cycles per second.

The Hertz unit was named after Heinrich Hertz, a German physicist who was the first to demonstrate the existence of electromagnetic waves. Hertz's experiments in the late 19th century paved the way for the development of modern radio, television, and other forms of wireless communication.

In summary, the Si unit of Hertz equals one wave passing a fixed point in one second, and it is a fundamental unit of measurement for the frequency of various types of waves.

To know more about frequency, visit:

https://brainly.com/question/5102661#

#SPJ11

What volume (in litres) of 0. 200 M NaOH is required to neutralize 22. 3 mL of 0. 152 M HCl?

Answers

To solve this problem, we can use the following equation:

Moles of acid = Moles of base

where "acid" refers to the HCl and "base" refers to the NaOH.

First, let's calculate the moles of HCl:

moles of HCl = concentration of HCl × volume of HCl

            = 0.152 mol/L × 0.0223 L

            = 0.0033856 mol

Next, let's calculate the volume of NaOH required to neutralize the HCl:

moles of NaOH = moles of HCl

volume of NaOH = moles of NaOH / concentration of NaOH

We know the concentration of NaOH (0.200 M), so let's substitute in the values:

moles of NaOH = 0.0033856 mol

volume of NaOH = 0.0033856 mol / 0.200 mol/L

              = 0.016928 L

              = 16.928 mL (rounded to three decimal places)

Therefore, 16.928 mL of 0.200 M NaOH is required to neutralize 22.3 mL of 0.152 M HCl.

To know more about problem refer here

https://brainly.com/question/31611375#

#SPJ11

Help plssssssssss

what are the condensed formula of the following alkyl

no.of alkyles condensed formula
carbons
1 methyl
2 ethyl
3 propyl
4 butyl
5 pentyl
6 hexyl
7 heptyl
8 oktyl
9 nonyl
10 dekyl
11 undekyl
12. dodekyl​

Answers

Here are the condensed formulas for each alkyl group, with the number of number of carbons:

1. Methyl (1 carbon): CH3-
2. Ethyl (2 carbons): CH3CH2-
3. Propyl (3 carbons): CH3CH2CH2-
4. Butyl (4 carbons): CH3(CH2)3-
5. Pentyl (5 carbons): CH3(CH2)4-
6. Hexyl (6 carbons): CH3(CH2)5-
7. Heptyl (7 carbons): CH3(CH2)6-
8. Octyl (8 carbons): CH3(CH2)7-
9. Nonyl (9 carbons): CH3(CH2)8-
10. Decyl (10 carbons): CH3(CH2)9-
11. Undecyl (11 carbons): CH3(CH2)10-
12. Dodecyl (12 carbons): CH3(CH2)11-

These formulas represent alkyl groups, which are fragments of alkane molecules with one hydrogen atom removed. They can attach to other molecules and form various organic compounds.

Know more about Alkyl Group here:

https://brainly.com/question/30896901

#SPJ11

1. Hydrogen + oxygen yields water

Label what type of reaction (synthesis, decomposition, single replacement, double replacement or combustion)

Write the balanced chemical equation

How much water could you get if you started with 250. 0 grams of hydrogen?

How much water could you get if you started with 250. 0 grams of oxygen?

Which is the limiting reactant?

Answers

Labeling the type of reaction:

This is a synthesis reaction because two elements (hydrogen and oxygen) are combining to form a compound (water).

Writing the balanced chemical equation:

2H2 + O2 → 2H2O

Determining how much water can be produced from 250.0 grams of hydrogen:

We need to use stoichiometry to calculate the amount of water produced from a given amount of hydrogen. The balanced chemical equation tells us that 2 moles of hydrogen reacts with 1 mole of oxygen to produce 2 moles of water.

First, let's convert 250.0 grams of hydrogen to moles:

moles of H2 = mass of H2 / molar mass of H2

           = 250.0 g / 2.016 g/mol

           = 124.01 mol

Using the mole ratio from the balanced chemical equation, we can calculate the moles of water produced:

moles of H2O = (2 moles of H2 / 2) × (1 mole of H2O / 2 moles of H2) × 124.01 moles of H2

            = 62.005 moles of H2O

Finally, we can convert moles of water to grams:

mass of H2O = moles of H2O × molar mass of H2O

           = 62.005 mol × 18.015 g/mol

           = 1115.9 g

Therefore, 250.0 grams of hydrogen can produce 1115.9 grams of water.

Determining how much water can be produced from 250.0 grams of oxygen:

We need to use stoichiometry again, but this time we'll start with the mass of oxygen.

From the balanced chemical equation, we know that 1 mole of oxygen reacts with 2 moles of hydrogen to produce 2 moles of water.

First, let's convert 250.0 grams of oxygen to moles:

moles of O2 = mass of O2 / molar mass of O2

           = 250.0 g / 31.999 g/mol

           = 7.813 moles

Using the mole ratio from the balanced chemical equation, we can calculate the moles of water produced:

moles of H2O = (1 mole of O2 / 2) × (2 moles of H2O / 1 mole of O2) × 7.813 moles of O2

            = 7.813 moles of H2O

Finally, we can convert moles of water to grams:

mass of H2O = moles of H2O × molar mass of H2O

           = 7.813 mol × 18.015 g/mol

           = 140.65 g

Therefore, 250.0 grams of oxygen can produce 140.65 grams of water.

Determining the limiting reactant:

To determine the limiting reactant, we need to compare the amount of product that can be produced from each reactant. The reactant that produces the smaller amount of product is the limiting reactant.

From our calculations above, we found that 250.0 grams of hydrogen can produce 1115.9 grams of water, and 250.0 grams of oxygen can produce 140.65 grams of water. Therefore, the limiting reactant is oxygen because it produces less water than hydrogen.

To know more about synthesis refer here

https://brainly.com/question/30514814?#

#SPJ11

`Name:
Date:
Properties of Matter - Crunch time Review
1. If two objects balance like the ones shown below, what must be true?
A. Object A has more mass than object B.
Both objects have the same mass.
C. Object A has more volume than object B.
D. Both objects have the same volume.

Answers

Answer:

d

Explanation:

because i did it

Methane (CH4) is a common fuel to heat homes in the winter. What is the molar enthalpy of combustion of methane? Assume this combustion occurs entirely in the gas phase. Bond Enthalpies(in kJ molâ1):CâC: 347 CâH: 413 HâH:432 OâH: 467 C=C: 614C=O: 745O=O: 498


A)â710kJ molâ1


B)â297 kJmolâ1


C)â1843 kJmolâ


1D)+792 kJmolâ1


E)+567 kJmol

Answers

The molar enthalpy of combustion of methane in the gas phase is approximately -1360 kJ/mol, which is closest to -297 kJ/mol. The correct option is B.

To determine the molar enthalpy of combustion of methane, we need to use the bond enthalpies provided to calculate the energy released when the bonds in methane are broken and new bonds are formed in the combustion reaction.

The balanced chemical equation for the combustion of methane is:

CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)

Breaking the bonds in methane requires energy while forming the new bonds in carbon dioxide and water releases energy. The molar enthalpy of combustion is the net energy released per mole of methane combusted.

Using the bond enthalpies given, we can calculate the energy required to break the bonds in methane:

4C-H bonds x 413 kJ/mol = 1652 kJ/mol
1C-C bond x 347 kJ/mol = 347 kJ/mol

Total energy required to break bonds in methane = 1652 kJ/mol + 347 kJ/mol = 1999 kJ/mol

Next, we can calculate the energy released by forming the new bonds in carbon dioxide and water:

2C=O bonds x 745 kJ/mol = 1490 kJ/mol
4O-H bonds x 467 kJ/mol = 1868 kJ/mol

Total energy released by forming new bonds = 1490 kJ/mol + 1868 kJ/mol = 3358 kJ/mol

The net energy released in the combustion of methane is the energy released by forming new bonds minus the energy required to break the old bonds:

Net energy released = 3358 kJ/mol - 1999 kJ/mol = 1359 kJ/mol

to know more about combustion reaction refer here:

https://brainly.com/question/30566775#

#SPJ11

What is the strongest type of intermolecular forces present between the hydrocarbon chains of neighboring stearic acid molecules?

Answers

The strongest type of intermolecular forces present between the hydrocarbon chains of neighboring stearic acid molecules is van der Waals forces, specifically London dispersion forces.

These forces arise due to temporary fluctuations in electron distribution, causing momentary dipoles that attract adjacent molecules.

Stearic acid is a long-chain fatty acid consisting of a hydrocarbon chain (nonpolar) and a carboxylic acid functional group (polar). The hydrocarbon chains in stearic acid are composed of carbon and hydrogen atoms, resulting in a relatively nonpolar nature.

London dispersion forces, also known as instantaneous dipole-induced dipole interactions, are intermolecular forces that occur between all molecules, including nonpolar molecules like stearic acid.

These forces arise due to temporary fluctuations in the electron distribution around atoms or molecules, leading to the formation of temporary dipoles.

In the case of stearic acid, the temporary dipole moment that arises in one molecule induces a corresponding dipole in the neighboring molecule, creating an attractive force between them.

These temporary dipoles result from the uneven distribution of electrons at any given moment, leading to the establishment of temporary positive and negative charges.

The strength of London dispersion forces depends on factors such as the size of the molecules involved and the ease of electron movement within them.

In the hydrocarbon chains of stearic acid, the presence of a large number of carbon atoms increases the surface area available for intermolecular interactions, making the London dispersion forces relatively stronger.

To learn more about hydrocarbon, refer below:

https://brainly.com/question/31643106

#SPJ11

If the pressure of a 7. 2 liter sample of gas changes from 735 mmHg to 800 mmHg and the temperature remains constant, what is the new volume of


gas?


06. 62 L


оооо


0 5. 9 L


0 7. 2L

Answers

The new volume of gas is 6.62 L when the pressure changes from 735 mmHg to 800 mmHg at a constant temperature.

According to Boyle's Law, at a constant temperature, the pressure and volume of a gas are inversely proportional. This means that as the pressure of the gas increases, its volume decreases, and vice versa. Therefore, we can use this law to find the new volume of gas when the pressure changes from 735 mmHg to 800 mmHg.

Using the formula P1V1 = P2V2, where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume, we can solve for V2.

Plugging in the values given in the question, we get:

735 mmHg x 7.2 L = 800 mmHg x V2

Solving for V2, we get:

V2 = (735 mmHg x 7.2 L) / 800 mmHg

V2 = 6.62 L

Therefore, the new volume of gas is 6.62 L when the pressure changes from 735 mmHg to 800 mmHg at a constant temperature.

To know more about pressure, visit:

https://brainly.com/question/18431008#

#SPJ11

If 2. 40 mol of carbon are exposed to 3. 10 mol of steam identify the limiting reactant? How many moles of each product are formed? SHOW WORK OR NO CREDIT!!

Answers

Limiting reactant in the given condition is Carbon, Moles of CO formed is 2.40 mol and moles of H2 formed is 2.40 mol

To determine the limiting reactant, we need to compare the amount of each reactant to their stoichiometric coefficients in the balanced chemical equation. The balanced equation for the reaction between carbon and steam is:

C (s) + H2O (g) → CO (g) + H2 (g)

The stoichiometric coefficients tell us that 1 mole of carbon reacts with 1 mole of steam to produce 1 mole of carbon monoxide and 1 mole of hydrogen gas.

So, for 2.40 moles of carbon, we need 2.40 moles of steam to react completely. However, we only have 3.10 moles of steam available, which means that steam is in excess and carbon is the limiting reactant.

To find the number of moles of products formed, we use the stoichiometric coefficients. Since carbon is the limiting reactant, we can use its amount to determine the theoretical yield of products.

From the balanced equation, 1 mole of carbon produces 1 mole of CO and 1 mole of H2. Therefore, 2.40 moles of carbon will produce 2.40 moles of CO and 2.40 moles of H2.

So, the answer to the question is:
Limiting reactant: Carbon
Moles of CO formed: 2.40 mol
Moles of H2 formed: 2.40 mol

Know more about Limiting Reactant here:

https://brainly.com/question/14225536

#SPJ11

you need to make an aqueous solution of 0.172 m iron(ii) nitrate for an experiment in lab, using a 250 ml volumetric flask. how much solid iron(ii) nitrate should you add?

Answers

We need to add 7.7 g of solid iron(II) nitrate to make a 0.172 M solution in 250 mL volumetric flask.

First, we can use molarity and volume of solution to find the number of moles of iron(II) nitrate needed:

moles of [tex]Fe(NO_3)_2[/tex]= Molarity × Volume in liters

moles of [tex]Fe(NO_3)_2[/tex] = 0.172 mol/L × 0.250 L = 0.043 mol

Next, we can use the molar mass of iron(II) nitrate to find the mass of the solid that needs to be added:

mass of [tex]Fe(NO_3)_2[/tex] = moles of [tex]Fe(NO_3)_2[/tex] × molar mass of [tex]Fe(NO_3)_2[/tex]

mass of [tex]Fe(NO_3)_2[/tex]= 0.043 mol × (55.85 g/mol + 2 × 14.01 g/mol + 6 × 16.00 g/mol)

mass of [tex]Fe(NO_3)_2[/tex]= 0.043 mol × 179.86 g/mol = 7.7 g

To know more about volumetric flask, here

brainly.com/question/19517011

#SPJ1

A soft lump of clay has water run on top of it. Most of the water and clay runs off the table. After a long while, the water is turned off and allowed to dry. There is no clay left; instead, there are small pebbles and other types of components left on the table.



Which natural process is this modeling?

Answers

The natural process being modeled is weathering, specifically physical weathering.

Physical weathering is the process by which rocks and minerals are broken down into smaller pieces without changing their chemical composition. Water is one of the most significant agents of physical weathering.

The scenario described in the question illustrates how water can cause physical weathering by soaking into a lump of clay, then drying out, leaving behind small pebbles and other components. The water expands as it freezes, causing the clay to crack, and as it dries, it evaporates, leaving behind the broken pieces.

Over time, this process can break down larger rocks and minerals into smaller particles, creating sediment that can be transported by wind, water, or ice, and deposited elsewhere. The result of physical weathering is often a mix of angular fragments that have the same composition as the original rock or mineral.

To know more about physical weathering, refer here:

https://brainly.com/question/29616084#

#SPJ11

A 4.1 g sample of gold (specific heat capacity = 0.130 J/g °C) is heated using 52.2 J of energy. If the original temperature of the gold is 25.0°C, what is its final temperature?

Answers

To solve this problem, we can use the formula:

q = m*c*ΔT, where q is the amount of heat energy absorbed by the gold, m is the mass of the gold, c is the specific heat capacity of gold, and ΔT is the change in temperature of the gold.

We are given the mass of gold (m = 4.1 g), the specific heat capacity of gold (c = 0.130 J/g °C), and the amount of energy used to heat the gold (q = 52.2 J). We are asked to find the final temperature of the gold (ΔT).

Rearranging the formula, we get:
ΔT = q/(m*c)
Substituting the values we know, we get:
ΔT = 52.2 J / (4.1 g * 0.130 J/g °C)
ΔT = 98.92 °C
This is the change in temperature of the gold. To find the final temperature, we add this to the original temperature of 25.0°C:
Final temperature = 25.0°C + 98.92°C
Final temperature = 123.92°C
Therefore, the final temperature of the gold is 123.1°C.

For more questions on: absorbed

https://brainly.com/question/29598149

#SPJ11

A gas sample having an initial temperature of 80℃ and an initial volume of 135 l is cooled to a final temperature of 12℃ and a final volume of 103 l. if the final pressure of the gas is 1.50 atm, what was the initial pressure?

Answers

If the final pressure of the gas is 1.50 atm, the initial pressure would be 2.16 atm.

In order to solve this problem, we need to use the combined gas law equation, which relates the pressure, volume, and temperature of a gas. The combined gas law states that PV/T = constant, where P is pressure, V is volume, and T is temperature.

We know the initial temperature, initial volume, final temperature, final volume, and final pressure of the gas. We can use this information to solve for the initial pressure.

First, we can use the combined gas law to find the constant in the equation:

(Pinitial)(Vinitial)/(Tinitial) = (Pfinal)(Vfinal)/(Tfinal)

Substituting in the values we know, we get:

(Pinitial)(135 L)/(353 K) = (1.50 atm)(103 L)/(285 K)

Solving for Pinitial, we get:

Pinitial = (1.50 atm)(103 L)(353 K)/(285 K)(135 L)

Pinitial = 2.16 atm

Therefore, the initial pressure of the gas was 2.16 atm.

In summary, we used the combined gas law equation to solve for the initial pressure of a gas sample with an initial temperature of 80℃ and an initial volume of 135 l that was cooled to a final temperature of 12℃ and a final volume of 103 l with a final pressure of 1.50 atm. We found that the initial pressure of the gas was 2.16 atm.

To know more about initial pressure, visit:

https://brainly.com/question/23710615#

#SPJ11

The volume of a sample of hydrogen gas at 0. 997 atm is 5. 00 L. What will be the new volume if the pressure is decreased to 0. 977 atm?

Answers

The new volume of the hydrogen gas is 5.12 L when the pressure is decreased to 0.977 atm.

The relationship between pressure and volume is described by Boyle's Law, which states that when the pressure of a gas decreases, its volume increases proportionally, and vice versa. In other words, the pressure and volume of a gas are inversely proportional, assuming temperature and amount of gas remain constant.

In this case, the initial pressure of the hydrogen gas is 0.997 atm, and its initial volume is 5.00 L. If the pressure is decreased to 0.977 atm, we can use Boyle's Law to calculate the new volume:

P1V1 = P2V2

Where P1 and V1 are the initial pressure and volume, and P2 and V2 are the new pressure and volume.

Substituting the given values, we get:

(0.997 atm)(5.00 L) = (0.977 atm)(V2)

Solving for V2, we get:

V2 = (0.997 atm)(5.00 L) / (0.977 atm)

V2 = 5.12 L

Therefore, the new volume of the hydrogen gas is 5.12 L when the pressure is decreased to 0.977 atm.

To know more about hydrogen gas, visit:

https://brainly.com/question/12494649#

#SPJ11

Write the following chemical reactions and balance:



Potassium reacts with sodium oxide to produce potassium oxide and sodium

Answers

The chemical reaction between potassium and sodium oxide results in the formation of potassium oxide and sodium. The balanced equation for this reaction is:
2K + Na₂O -> K₂O + 2Na


This reaction is an example of a displacement reaction, where a more reactive element (potassium) displaces a less reactive element (sodium) from its compound (sodium oxide). The displacement occurs because potassium has a greater tendency to lose electrons and form cations compared to sodium.

Potassium oxide is an important chemical compound with many industrial applications, including in the production of glass, ceramics, and fertilizers. It is also used as a drying agent and catalyst in organic reactions.

Sodium, on the other hand, is a highly reactive metal that is commonly found in compounds such as sodium chloride (table salt) and sodium hydroxide (lye). It is an essential element for many biological processes, including nerve and muscle function.

Overall, this chemical reaction between potassium and sodium oxide is important because it highlights the reactivity of these elements and the formation of useful compounds such as potassium oxide. It also emphasizes the importance of balancing chemical equations to ensure that the reactants and products are in the correct proportions.

To learn more about displacement reaction visit:

https://brainly.com/question/20690229

#SPJ11

What is the pH of a solution where [OH⁻]=0. 00030M

Answers

The pH of the solution where [tex][OH⁻][/tex]=0.00030 M is 11.48. This indicates that the solution is basic, or alkaline, since the pH is greater than 7.

To determine the pH of a solution where[tex][OH⁻][/tex]=0.00030 M, we can use the relationship between the concentrations of hydrogen ions and hydroxide ions in water, which is defined by the equation[tex]Kw = [H⁺][OH⁻].[/tex]At 25°C, the value of Kw is [tex]1.0 x 10^-14[/tex].

If we substitute the concentration of hydroxide ions given in the question ([tex][OH⁻][/tex]=0.00030 M) into this equation, we can solve for the concentration of hydrogen ions:

[tex]Kw = [H⁺][OH⁻]\\1.0 x 10^-14 = H⁺\\[H⁺] = 3.3 x 10^-12 M[/tex]

Now that we know the concentration of hydrogen ions, we can use the formula for pH, which is defined as [tex]pH = -log[H⁺][/tex], to find the pH of the solution:

[tex]pH = -log(3.3 x 10^-12)[/tex]

pH = 11.48

To know more about pH refer to-

https://brainly.com/question/2288405

#SPJ11

How many liters of a 0. 26 M solution of K2(MnO4) would contain 75 g of K2(MnO4)?​

Answers

1.35 liters of a 0.26 M solution of K2(MnO4) would contain 75 g of K2(MnO4).

To determine the volume of a 0.26 M solution of K2(MnO4) needed to contain 75 g of K2(MnO4), we need to use the formula:

Molarity (M) = moles of solute / volume of solution (L)

First, convert the mass of K2(MnO4) to moles using its molar mass:

Molar mass of K2(MnO4) = 2 * (39.1 g/mol for K) + (54.9 g/mol for Mn) + 4 * (16 g/mol for O) = 214.2 g/mol

Moles of K2(MnO4) = 75 g / 214.2 g/mol ≈ 0.35 moles

Now use the molarity formula to find the volume:

0.26 M = 0.35 moles / volume (L)

Volume (L) = 0.35 moles / 0.26 M ≈ 1.35 L

So, approximately 1.35 liters of a 0.26 M solution of K2(MnO4) would contain 75 g of K2(MnO4).

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

The evaporation heat of mercury is 296 kJ/ kg. Calculate how much heat needs to be provided to change 50 g of this substance into vapour at its boiling point

Answers

To calculate the amount of heat required to change 50 g of mercury into vapor at its boiling point, we need to use the following formula:

Q = m * H_vap

where Q is the amount of heat required, m is the mass of the substance, and H_vap is the heat of vaporization.

We are given that the heat of vaporization of mercury is 296 kJ/kg. To use this value, we need to convert the mass of mercury to kilograms:

m = 50 g = 0.05 kg

Now we can use the formula to calculate the amount of heat required:

Q = 0.05 kg * 296 kJ/kg = 14.8 kJ

Therefore, 14.8 kJ of heat needs to be provided to change 50 g of mercury into vapor at its boiling point.

To know more about required refer here

https://brainly.com/question/2929431#

#SPJ11

Other Questions
a florida citrus grower estimates that if 60 orange trees are planted, the average yield per tree will be 400 oranges. The average yield will decrease by 4 oranges per tree for each additional tree planted on the same acreage. Express the grower's total yield as a function of the number of additional trees planted, draw the graph and estimate the total number of trees the grower should plant to maximize yield. Henry earned $850 over the summer working odd jobs. he wants to put his money into a savings account for when he is ready to buy a car. his bank offers a simple interest account at 5%, how much interest will henry have earned after 4 years? Neon leaks out of a container in 15. 0 minutes. The same amount of an unknown gas will leak out in 21. 2 minutes under identical conditions. What is this unknown gas? * Determine the intervals on which the given function is concave up or concave down and find the points of inflection. S(x) = (x - 10)(1 - x) (Use symbolic notation and fractions where needed. Give your answer in three decimal numbers Part A: Sydney made $18. 50 selling lemonade, by the cup, at her yard sale. She sold each cup for $0. 50 and received a $3 tip from a neighbor. Write an equation to represent this situation. (4 points) Part B: Daria made a profit of $21. 00 selling lemonade. She sold her lemonade for $0. 75 per cup, received a tip of $3 from a neighbor, but also had to buy each plastic cup she used for $0. 10 per cup. Write an equation to represent this situation. (4 points) Part C: Explain how the equations from Part A and Part B differ. (2 points Two skaters are standing in the middle of an ice skating rink. Skater 1 has a mass of 50kg and Skater 2 has a mass of 45kg. When they push off from one another, Skater 1 has a speed of 2 m/s. What must be the speed of Skater 2? Calculate the heat energy transferred to 2. 3g of copper, which has a specific heat of 0. 385 J/gC, that is heated from 23. 0C to 174. 0C. (Enter the answer rounded to two decimal places with a space between the number and unit, ex. : 145. 23 J) According to the author, what is true of alchemists that succeed? (ELA.9.R.1.2)Question 6 options:To achieve your dream, you must accept that you must grow.Your dream will only become reality if you work for it.You must change things around you in order to preserve your goal.You have to be prepared to accept success so that you can realize your dream. An immediate effect of the lend-lease program was that. Fred hampton says in the film, "they want to get rid of me because im saying something that might wake some other exploited people." what is your response to the brutal treatment of hampton and other organizers mentioned in the film? What are the points of comparison used to compare online shopping and shopping in a store in this passage?enjoyment, quality, convenience, energy savingspersonal experiences, generalizations, ease of usehistory, current experiences, futureprice, advertisements, customer service A wheel has a diameter of 40 cm, to the nearest 10 cm.Write an inequality to showa the lower and upper bounds for the diameter d of the wheelb the lower and upper bounds for the circumference C of the wheel. Find the coordinates of the absolute extrema for f(x) on the closed interval [-4, 4]x^3 - 3x^2 - 9x + 20 A lab technician is filling vitamin C capsules. He has 2.87 ounces of vitamin C and is putting 0.014 ounces of vitamin C into each capsule. How many capsules will the lab technician be able to fill with vitamin C? A. 3 B. 25 C. 402 D. 205 Can someone help me make a conclusion ???My thesis was: Schools should provide more counseling for the sake of students mental health. A quantity of gas is at a temperature of 20C, a pressure of 760 torr and occupies a volume of 2. 00 L. If the pressure is changed to 730 torr, what will be the new volume? Assume that there is no temperature change The firefighters in several cities in the area have been working long hours, and they feel they are underpaid. they have been picketing for increased wages, additional staff, and fewer hours. however, they are considered essential to the security of the country. what can be done to force them back to work?a. file a complaint based on the occupational safety and health act.b. file a claim with the department of labor.c. enforce the national labor relations act.d. enforce executive order 11246.e. enforce the national emergency strike provision. Find the exact location of all the relative and absolute extrema of the function (Order your answers from smallest to largest x.) (x)=2x-x+ with domain (0,3) Stilley Resources bonds have 20 years left to maturity. Interest is paid annually, and the bonds have a $1,000 par value and a coupon rate of 18.5 percent. Why did rich families, or even cities, would choose to become patrons and sponsor various artists and inventors?