The force exerted by student A with his scooter is 306 N and that of student B is 204 N.
Force applied by each studentThe force exerted by each student is calculated from Newton's second law of motion.
F = ma
where;
m is mass a is accelerationF(A) = 127.5 x 2.4
F(A) = 306 N
F(B) = 120 x 1.7
F(B) = 204 N
Thus, the force exerted by student A with his scooter is 306 N and that of student B is 204 N.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
A railroad cart with a mass of m1 = 11.6 t is at rest at the top of an h = 10.9 m high hump yard hill.
After it is pushed very slowly over the edge, it starts to roll down. At the bottom it hits another cart originally at rest with a mass of m2 = 23.2 t. The bumper mechanism locks the two carts together. What is the final common speed of the two carts? (Neglect losses due to rolling friction of the carts. The letter t stands for metric ton in the SI system.)
The final common speed of the two carts will be 69.3 m/sec.The momentum conservation principle is applied.
What is the law of conservation of momentum?According to the law of conservation of momentum, the momentum of the body before the collision is always equal to the momentum of the body after the collision.
Unit conversion:
1 metric tons = 1000 kg
Given data;
m₁= 11.6 metric ton =11600 kg
m₂ = 23.2 metric ton = 23200 kg
Let v represent the combined velocity of the two carts once they are connected, and let u represent the starting velocity of cart 1 when it reaches the bottom.
Considering energy conservation;
[tex]\rm m_1 g h = \frac{1}{2} m_1 \times u^2 \\\\ u^2 = 2gh\\\\ u^2 = 2 \times 9.8 \times 10.6 \\\\ u = 207.972 \ m/s[/tex]
From the conservation of momentum principle;
[tex]\rm m_1 \times u = (m_1 + m_2) v\\\\ 11600 \times 207.972 = (11600 + 23200) \times v \\\\ v = 69.3 \ m/s[/tex]
Hence, the final common speed of the two carts will be 69.3 m/sec.
To learn more about the law of conservation of momentum refer;
https://brainly.com/question/1113396
#SPJ1
A truck accelerating at 0.0083 meters/second2 covers a distance of 5.8 × 104 meters. If the truck's mass is 7,000 kilograms, what is the work done to reach this distance?
Answer:
Explanation:
Force:
⇒ Mass × Acceleration
Work Done:
⇒ Force × Distance
Calculations:
⇒ Force = 0.0083 × 7000 N
⇒ Work done = 0.0083 × 7000 × 5.8 × 10^4 Joules
when energy is transferred from one part of a system to another, some of the energy is lost during the transfer and cannot be used as it was intended. Which two sentences describes examples of this?
Sentences A and D describe examples of energy transformation.Heat is produced when a car's tires rub against the pavement and as electricity passes across power wires, they become hotter.
What is the law of conservation of energy?According to the law of conservation of energy, the energy of an isolated system stays unchanged throughout time.it is said to be conserved.
Energy cannot be created nor destroyed and can be transferred from one form to the other form.
The complete question is
"When energy is moved from one component of a system to another, some of the energy is lost and cannot be used as planned.
Which two statements provide examples?
A. Friction between a car's tires and the road produces heat.
B. Sunlight strikes a solar panel, generating electricity.
c. Stereo speakers emit a sound when powered by electrical energy,
D. Wind moves a turbine, generating electricity.
I E. Power lines heat up as electricity flows through them."
Some of the energy wasted during the movement of energy from one section of a system to another is heat is produced by friction between a car's tires and the road and as electricity passes via power lines, they heat up.
Hence, sentences A and D describe examples of energy transformation.
To learn more about the law of conservation of energy refer to the link;
https://brainly.com/question/2137260
#SPJ1
Particles q1, q2, and q3 are in a straight line.
Particles q1 = -5.00 x 10-6 C,q2 = +2.50 x 10-6 C,
and q3 = -2.50 x 10-6 C. Particles q₁ and q2 are
separated by 0.500 m. Particles q2 and q3 are
separated by 0.250 m. What is the net force on q2?
The net force on q2 will be 1.35 N
A force in physics is an effect that has the power to alter an object's motion. A mass-containing object's velocity can vary, or accelerate, as a result of a force. Intuitively, a push or a pull can also be used to describe force. Being a vector quantity, a force has both magnitude and direction.
Given Particles q1, q2, and q3 are in a straight line. Particles q1 = -5.00 x 10-6 C,q2 = +2.50 x 10-6 C, and q3 = -2.50 x 10-6 C. Particles q₁ and q2 are separated by 0.500 m. Particles q2 and q3 are separated by 0.250 m.
We have to find the net force on q2
At first we will find Force due to q1
F = 9 × 10⁹ × 5 × 10⁻⁶ × 2.5 × 10⁻⁶ / 0.5²
F = 450 × 10⁻³
F₁ = 0.45 N (+)
Now we will find Force due to q2
F = 9 × 10⁹ × 5 × 10⁻⁶ × 2.5 × 10⁻⁶ / 0.25²
F = 1800 × 10⁻³
F₂ = 1.8 N (-)
So net force (F) will be
F = F₂ - F₁
F = 1.8 - 0.45
F = 1.35 N
Hence the net force on q2 will be 1.35 N
Learn more about force here:
https://brainly.com/question/25573309
#SPJ10
A circular wheel of mass 50 kg and radius 200 mm is rotating at 300 r.p.m. Find its kinetic energy.
A rocket is fired with an initial VELOCITY OF 100m/s at an angle of 55° above the horizontal, It explodes On the mountain Side 12s after its Firing What is X - and y-coordinates of the rocket relative to its Firing Point?
Answer
688.32m and 277.44m
Explanation :
⠀
[tex] \large{\maltese{\textsf{\underline{To find :-}}}} [/tex]
The X and Y coordinates of the rocket relative of firing
⠀
⠀
[tex] \large{\maltese{\textsf{\underline{Given :-}}}} \\ \\ \sf velocity (v_i) = 100m{s}^{-1} \\ \sf angle ({\theta}_{1}) = 55.0{\degree} \\ \sf time (t) = 12s [/tex]
⠀
⠀
[tex] \Large{\maltese{\textsf{\underline{\underline{Step by Step Solution:-}}}}} [/tex]
⠀
⠀
The horizontal range of projectile at x.
⠀
[tex] \sf \large{x = v_{xi}} \times t \\ \\ \sf \large{x = v_i \times \cos {\theta}_{i} \times t} [/tex]
⠀
⠀
[tex] \large\textsf{\underline{Now substituting the required values}} [/tex]
⠀
⠀
[tex] \sf x = 300 \times \cos 55{\degree} \times 12 \\ \\ \sf x = 100 \times 0.5756 \times 12 \\ \\ {\underline{\boxed{\bold{ x = 688.32m}}}} [/tex]
⠀
⠀
The vertical position of projectile at y.
⠀
⠀
[tex]\sf \large y = v_{yi} \times t - (\frac{1}{2} \times g \times {t}^{2}) \\ \\ \sf \large y = v_i \times \cos \theta \times t - \frac{1}{2} g {t}^{2} [/tex]
⠀
⠀
[tex]\textsf{ \large {\underline{Now substituting the required values}} } [/tex]
⠀
⠀
[tex] \sf y = 100 \times \cos55{ \degree} \times 12 - \frac{1}{2} \times 9.80 \times {12}^{2} \\ \\ \sf y = 100 \times 0.8192 \times 12 - 0.5 \times 9.8 \times 144 \\ \\ \sf y = 983.04 - 705.6 \\ \\ \underline{ \boxed{ \bold{y = 277.44m}}} [/tex]
⠀
⠀
⠀
Henceforth, the distance at horizon is 688.32m and at vertical is 277.44m.Consider an imaginary cylinder with a radius of r = 0.185 m and a length of l = 0.440 m that has an infinite line of positive charge running along its axis. The charge per unit length on the line is λ = 4.50 μC/m.
1.What is the electric flux through the cylinder due to this infinite line of charge?
2.What is the flux through the cylinder if its radius is increased to r= 0.600 m ?
3.What is the flux through the cylinder if its length is increased to l= 0.990 m ?
The electric flux through the cylinder due to this infinte line is 1 355 x 10' N m²/C, The electric flux through the cylinder is independent of the radius of the cylinder. So, the electric flux through the cylinder is the same as in part (a) which is equal to is 1.355 10 Nm C and The electric flux through the cylinder due to this infinte line is 2.711 x 10' N m² C
Given an imaginary cylinder with a radius of r = 0.185 m and a length of l = 0.440 m that has an infinite line of positive charge running along its axis. The charge per unit length on the line is λ = 4.50 μC/m.
Solve for the electric flux through the cylinder due to this infinte line:
As below equation mentions, the electric flux for a uniform electric filed is given by:
Фₓ = EA cosΦ
Φₓ = λLcosΦ)/ε
Φₓ = (3 x 10^(-6) x 0.4 x cos0)/(8.854 x 10^(-12))
Φₓ = 1.355 x 10^(5) Nm²/C
Hence the electric flux through the cylinder due to this infinte line is 1 355 x 10' N m²/C, The electric flux through the cylinder is independent of the radius of the cylinder. So, the electric flux through the cylinder is the same as in part (a) which is equal to is 1.355 10 Nm C and The electric flux through the cylinder due to this infinte line is 2.711 x 10' N m² C
Learn more about electric flux here:
https://brainly.com/question/26289097
#SPJ10
In which device is chemical energy transformed into electrical energy?
Answer:
A Rechargeable Battery
Explanation:
That is roughly what happens when a secondary cell is recharged (rechargeable battery.) Electric current transforms one chemical species with a lower energy level into another with a higher energy level. When the battery is loaded, this energy can be released. Strictly speaking, no conversion occurs: chemical energy is electrical energy! The energy of electrons in any particular substance, such as metal, are due to electron interactions with the nuclei in the substance and with each other. Electrons, in particular, occupy certain energy levels in metals. Because each metal has a distinct highest occupied energy level, electrons can alter their energies by traveling from one metal to another. An electrical current is made up of this movement!
Tennis balls experience a large drag force. A tennis ball is hit so that it goes up and then comes back straight down.
A tennis ball is hit by a large force so that it goes up into the air and then it comes back straight down because of gravity.
How object move upward and downward?We know that objects move upward due to application of force on it while on the other hand, object comes to the ground because of the attraction of earth which we called gravity.
So we can conclude that a tennis ball is hit by a large force so that it goes up into the air and then it comes back straight down because of gravity.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
a. The potential energy stored in the compressed spring of a dart gun, with a spring constant of 62.00 N/m, is 0.940 J. Find by how much is the spring is compressed.
b. A 0.010 kg dart is fired straight up. Find the vertical distance the dart travels from its position when the spring is compressed to its highest position.
c. The same dart is now fired horizontally from a height of 4.70 m. The dart remains in contact until the spring reaches its equilibrium position. Find the horizontal velocity of the dart at that time.
d. Find the horizontal distance from the equilibrium position at which the dart hits the ground.
a. The spring is compressed by 0.174 m.
b. The vertical distance the dart travels from its position when the spring is compressed to its highest position is 9.6 m.
c. The horizontal velocity of the dart at that time is 13.74 m/s.
d. The horizontal distance from the equilibrium position at which the dart hits the ground is 19.236 m.
What is potential energy?The energy by virtue of its position is called the potential energy.
a. Given is the potential energy stored in the compressed spring of a dart gun, with a spring constant of 62.00 N/m, is 0.940 J.
PE of spring = 1/2 kx²
Put the values, we get
P.E = 0.940 = 1/2 x 62 x²
x = 0.174 m
Thus, the spring is compressed by 0.174 m.
b. Given is a 0.010 kg dart is fired straight up.
The vertical height is find out by
0.940 J = (0.010 kg) (9.8 m/s²) h
h = 9.6 m
Thus, the vertical distance the dart travels from its position is 9.6 m
c. From the conservation of energy principle, total mechanical energy is conserved.
1/2 mv² =mgh
v = √2gh
Plug the values, we get
v = √2 x 9.8x 9.6
v = 13.74 m/s
Thus, the horizontal velocity is 13.74 m/s.
d. Time that dart spends in air, t = √2h/g
t = √(2x9.6)/9.81
t = 1.4 s
The horizontal distance from the equilibrium position at which the dart hits the ground.
Horizontal distance = (Velocity on x direction) x time
Horizontal distance = 13.74 m/s x 1.4s
Horizontal distance = 19.236 m
Thus, the horizontal distance is 19.236 m.
Learn more about potential energy.
https://brainly.com/question/24284560
#SPJ1
Which is not an example of static electricity?
A. Clothes sticking together in the dryer
B. Getting shocked when you touch a door knob
C. plugging in a lamp
Answer asap
Plugging in a lamp is not an example of Static electricity. Thus, the correct option is C.
What is Static electricity?Static electricity may be defined as the consequence of an imbalance between negative and positive charges in an object. It does not involve the direct flow of electrons throughout a wire.
Clothes sticking together in the dryer and getting shocked when you touch a doorknob are examples of static electricity while plugging in a lamp is an example of mobile electricity that mediates the direct flow of electrons to generate an electric current and as a result, the lamp glows.
Therefore, the correct option for this question is C.
To learn more about Static electricity, refer to the link:
https://brainly.com/question/4918499
#SPJ1
Put the steps of the scientific method in order.
A. Question -> Research -> Hypothesis -> Experiment -> Analysis -> Conclusion
B. Research -> Hypothesis -> Experiment ->Question -> Conclusion -> Analysis
C. Research -> Question -> Hypothesis -> Experiment -> Analysis -> Conclusion
D. Hypothesis -> Experiment -> Conclusion -> Question -> Research -> Analysis
Answer:
c
Explanation:
Answer:
c
Explanation:
im smart
The frequency of a waveform is found by determining the...
Select one:
a. number of crests passing a point in a given time.
b. distance from a wave's midpoint to its crest.
c. distance between two moving low points of the wave.
d. distance between a crest and a trough.
By counting the number of crests that pass a point in a specific amount of time, one may determine the frequency of a waveform. Option a is correct.
What is the frequency of the sound?A sound pressure wave's frequency, also known as pitch, is the number of times it repeats itself every second.
The frequency of the sound is the inverse of the period. If the wavelength of a wave is short. The wave will indeed have a lower frequency. A longer wavelength denotes a lower frequency.
The frequency of a waveform is found by determining the number of crests passing a point in a given time.
Hence option a is correct.
To learn more about the frequency of the sound, refer to the link https://brainly.com/question/1435829.
#SPJ1
What are some words that have changed meaning due to technological advances in the last 20 years?
Some words that have changed meaning due to technological advances are dial, type, tweet, drone, and spam.
Why is a valve placed before the rotameter?
a.To measure the flow of liquid entering the extraction bed
b.To regulate the flow of fluid leaving the extraction bed
c.To regulate the flow of liquid entering the extraction bed
d.None of the above.
A valve placed is before the rotameter to regulate the flow of liquid entering the extraction bed. The correct option is c.
What is control valve?Control valves are generally used to maintain a flow as close as possible to the desired value.
Valves positioned before the rotameter for throttling purposes. A control valve will regulates the rate of fluid flow. Control valves control typically flow rate, pressure, and temperature.
Thus, the correct option is c.
Learn more about control valve.
https://brainly.com/question/20347260
#SPJ1
Answer asap for brainlist
They use less wire, A
what’s better csp or pv ?
Answer:
CSP
Explanation:
CSP systems store energy through Thermal Energy Storage technologies (TES), so power can be used when there isn't enough sunlight. PV systems, however, can't store thermal energy because they use direct sunlight, rather than heat. For this reason, CSP systems are better for energy storage and efficiency.
Calculate the frequency of the wave shown below.
Frequency = Speed/Wavelength (λ)
Select one:
a. 4 hertz
b. 3 hertz
c. 2 hertz
d. 1 hertz
[tex] \color{skyblue}{ \underline{ \frak { \: option \: ( \: c \: ) = 2 \: hertz ✓}}}[/tex]
[tex] \: \: [/tex]
Given :
Wavelength ( λ ) = 2 m[tex] \: \: [/tex]
Speed = 4 m/s[tex] \: \: [/tex]
We, have to find frequency :
[tex] \: [/tex]
[tex] \large \tt \: Frequency = \frac{Speed}{Wavelength ( \: λ \: )} [/tex][tex] \: \: [/tex]
[tex]\large \tt \: Frequency = \frac{4}{2} [/tex][tex] \: \: [/tex]
[tex]\large \tt \: Frequency = \cancel \frac{4}{2} [/tex][tex] \: \: [/tex]
[tex] \pink{ \boxed{\large \tt \: Frequency =2 \: Hertz ✓}}[/tex][tex] \: \: [/tex]
Hope Helps!
One mole of a substance contains 6.02 × 1023 protons and an equal number of electrons. If the protons could somehow be separated from the electrons and placed in very small, individual containers separated by a million meters, what would be the magnitude of the electrostatic force exerted by one box on the other?
Explanation:
it is almost zero .this is because the distance and the electrostatic force are inversely proportional
Where is the body or mass in the water when the buoyant force is equal to the weight of the mass? Does it float up, or down or in the middle?
Answer:
it will float
Explanation:
according to Archimedes' principle, if the buoyant force is equal to the weight of the mass of the object, the object will float
Which statement describes how upwelling occurs
The statement best describes how upwelling occurs is Upwelling causes nutrients, minerals, and tiny organisms to rise. The correct option is C.
What is upwelling?Upwelling occurs when winds push surface water away from the shore and deeper water rises to fill the gap.
The upwelling is a cycle that shows up in the water bodies all over the planet. This cycle is basically addressing the ascending of the virus waters towards the surface where there's hotter environment, subsequently hotter water also.
With the ascent of the virus waters towards the surface, everything with it ascend also. The virus waters are plentiful in supplements and minerals, as well as minuscule creatures, like the Phyto-microscopic fishes.
This is a cycle that is vital for the presence of the environments in the bigger water bodies.
Thus, the correct option is C.
Learn more about upwelling.
https://brainly.com/question/14785047
#SPJ1
A 50 N force is applied to the free end of a spiral spring of force constant, 100 Nm
Calculate the work done by the force to stretch the spring.
The work done by the force to stretch the spring is determined as 12.5 J.
Work done by the forceThe work done by the force to stretch the spring is calculated as follows;
W = ¹/₂Fx
F = kx
W = ¹/₂F(F/k)
W = ¹/₂F²/k
W = ¹/₂ x (50²)/100
W = 12.5 J
Thus, the work done by the force to stretch the spring is determined as 12.5 J.
Learn more about work done here: https://brainly.com/question/25573309
#SPJ1
A car moves with the speed of 40km/hr for the first half distance and 60km/hr for second half distance.find average speed of car?
Answer:
50km/h
Explanation:
average = (a + b) / 2
average = (60 + 40) / 2
average = 50
how do I calculate equilibrant and fx and fy. I don't understand what they are asking
(a) The equilibrant C for force of vector A and B is 3.43 N.
(b) The equilibrant C for fx of vector A and B is 2.1 N.
(c) The equilibrant C, for fy of vector A and B is 2.12 N.
What is equilibrant force?An equilibrant force is a single force that will bring other bodies into equilibrium.
From configuration 1:Vector A: mass = 0.2 kg, θ = 20⁰
Vector B: mass = 0.15 kg, θ = 80⁰
Fx = mg cosθ
Fy = mg sinθ
where;
m is mass g is acceleration due to gravityVector AForce of A due to its weight
F(A) = mg
F(A) = 0.2 x 9.8 = 1.96 N
Fx = (0.2 x 9.8) cos(20) = 1.84 N
Fy = (0.2 x 9.8) sin(20) = 0.67 N
Resultant forceR = √(0.67² + 1.84²)
R = 1.96 N
Vector BForce of B due to its weight
F(B) = mg
F(B) = 0.15 x 9.8
F(B) = 1.47 N
Fx = (0.15 x 9.8) cos(80) = 0.26 N
Fy = (0.15 x 9.8) sin(80) = 1.45 N
Resultant forceR = √(0.26² + 1.45²)
R= 1.47 N
Equilibrant C of vector A and BEquilibrant force:
Force, C = 1.96 N + 1.47 N
Force, C = 3.43 N
Equilibrant FX:
Fx, C = Fx(A) + Fx(B)
Fx, C = 1.84 N + 0.26 N = 2.1 N
Equilibrant FY:
Fy, C = Fy(A) + Fy(B)
Fy, C =0.67 N + 1.45 N = 2.12 N
Learn more about equilibrant force here: https://brainly.com/question/8045102
#SPJ1
If the mass of the falling object is 60kg. Calculate force. [Take g=10m/s2]
A car traveling at 120km/h towards west makes a right turn and travel north without changing its speed .120km/h120km/h.Using a vector diagram.Finding the magnitude and direction of the resultant velocity of the car
The magnitude and direction of the resultant velocity of the car will be 169.70 km/h and 45°.
What is a vector?The quantity which has magnitude, direction and follows the law of vector addition is called a vector.
A car traveling at 120 km/h towards west makes a right turn and travel north without changing its speed.
Then the magnitude (R) will be
R² = 120² + 120²
R² = 28800
R = 169.70 km / h
Then the direction of the resultant velocity will be
tan θ = 120 / 120
tan θ = 1
tan θ = tan 45°
θ = 45°
More about the vector link is given below.
https://brainly.com/question/13188123
#SPJ1
Two very large charged parallel metal plates are 13.0 cm c m apart and produce a uniform electric field of 3.40×106 N/C N / C between them. A proton is fired perpendicular to these plates with an initial speed 5.20 km/s k m / s , starting at the middle of the negative plate and going toward the positive plate.
The work done by the electric field on the proton when it reaches the positive plate willl be 9.1 ×10⁻¹⁵ J.
What is an electric field?A physical field that surrounds electrically charged particles and exerts a force on all other charged particles in the field, either attracting or repelling them, is referred to as an electric field,
The electric field formula is as follows:
E = F /Q
Where,
The electric field is denoted by the letter E.
F is a powerful letter.
The charge is Q.
The potential difference between the plate;
[tex]\rm V = E d \\\\ V = 3.40 \times 10^6 \times 0.13 \ m \\\\ V= 442000 \\\\ V = 4.42 \times 10^5 \ v[/tex]
Force on the charged particle ;
[tex]\rm F = qV \\\\ F= 1.6 \times 10^{-19} \times 4.42 \times 10^ 5 \\\\\ F = 7.0 \times 10^{-14} \ N[/tex]
Work done in order to move the charge;
[tex]\rm W = F \times d \\\\ W= 7.0 \times 10^{-14} \ N \times 0.13 m \\\\ W=9.1 \times 10^{-15} \ J[/tex]
Hence, the work done by the electric field on the proton when it reaches the positive plate willl be 9.1 ×10⁻¹⁵ J.
The complete question is attached in attachments.
To learn more about the electric field refer to the link;
https://brainly.com/question/26690770
#SPJ1
PLEASE HELP!! 50 points. The answer is not 2.6 m/s.
Answer:
A
Explanation:
5.2mm/s
hope this helps
A squirrel sitting on the ground starts to run with an acceleration of 5.1 m/s².
How fast is the squirrel going after 0.25 seconds?
O A. 20.4m/s
OB. 0.49 m/s
OC. 3.1 m/s
OD. 1.28 m/s
Answer:
0.159
Explanation:
the formula to find its is 1÷2*gt^2
Answer:
D
Explanation:
v= a t
= 5.1 * .25 = 1.275 m/s
What is the estimated density of the golf ball? Record your answer to the nearest hundreth.
g/cm3
The estimated density of the golf ball is 170 kg/m³
What is density?
Density is the ratio as Mass per unit Volume.
In displacement method,
First , we measuring the volume of water displaced by an object which tell us the volume of the object then we will use the physical balance to determine its mass.
Then calculate the density by dividing the mass by the volume.
Here, D = m/V
By displacement method , the estimated volume of golf ball is 100 cm³ and estimated mass is 600 g
Then ,
Density = 100 cm³ / 600 g = 0. 17 g/ cm³ = 170 kg/m³
So the estimated density of golf ball is 170 kg/m³
For more content related to Density visit here;
https://brainly.com/question/12006917
#SPJ1
