Two of the computers at work suddenly can’t go online or print over the network. The computers may be trying to share the same IP address.

Which strategy is most likely to solve the problem?
rebooting the network server
reconfiguring the network hubs
installing network gateway hardware
logging off one of the computers, and then logging back o

Answer:

d. relational Select, Project, and Join operations individually or in combination

Explanation:

SQL is short for structured query language. The SQL Select command allows the user to obtain data from a database. After the data is computed, the output is in a tabular form which is known as the result set.

All the queries begin with the Select command. The column and the table names are clearly noted in the instructions. This command can also execute projects and join several operations in combination or individually.

Answer:

14

Explanation:

Answer:

IT is ACTIVE

Explanation: I took the quiz

Answer:

not sure sorry

Explanation:

Answer:

the information sent to a function is the 'input'.

or maybe not hehe

Answer:

Avoid dirt and sand. Use care when cleaning dirt particles and sand from your digital camera. Do not use canned or pressurized air to clean the sand, as you might just drive the particles into the camera case. Budget-priced camera cases might not be sealed perfectly, making it easier for grit and sand to penetrate the case and cause damage. Gently blow out the grit and sand to avoid this problem. Use care when shooting photos on a windy day at the beach, too, where sand can blow with excessive force. Avoid opening the battery compartment on such days.

Avoid liquids. Keep all liquids away from the camera unless you own a model with a waterproof case.

Avoid touching the lens and LCD. Oils from your skin smudge the lens and LCD, eventually causing permanent damage. Clean the lens and LCD with a microfiber cloth when you see a smudge from your fingertips.

The lens and sun don't mix. Do not point your camera's lens directly at the sun for any length of time, especially with a DSLR camera. Sunlight focused through the lens of the camera could damage the image sensor or even start a fire inside the camera.

Use cleaning liquids with care. Avoid using an excessive amount of cleaning liquid with your camera. In fact, other than stubborn smudges, you should be able to clean the camera with a dry microfiber cloth. If a liquid is needed, place a few drops of the liquid on the cloth, rather than directly on the camera.

Vacuum the bag. Dirt and sand inside your camera bag could damage your camera, so vacuum the bag regularly to keep it clean and protect your camera.

Watch the temperature. Although some cameras are designed to survive harsh temperatures, most cameras are not. Do not leave your camera in a sunny vehicle, where temperatures quickly can exceed 100 degrees Fahrenheit. Avoid leaving the camera in direct sunlight, which can damage the plastic. Finally, avoid extreme cold, too, which could damage the LCD.

Use neck straps and wrist loops. Use neck straps and wrist loops with your camera. If you slip while hiking, or if you lose the grip on your camera near the pool, the straps can save your camera from a potentially disastrous fall.

Store camera properly. If you're not going to use your camera for a couple of months, store it in a low humidity area and out of direct sunlight. Additionally, store the camera without the battery inserted to reduce the risk of corrosion.

Explanation:

:)

In python:

fat = int(input("Enter the # of fat grams: "))

carbs = int(input("Enter the # of carbohydrate grams: "))

print("The calories from fat are {} and the calories from carbs is {}".format(fat * 9, carbs * 4))

Answer:

Replace

while ( /* Your solution goes here */ );

with

while (printVal <=countLimit );

Explanation:

while (printVal <=countLimit );

This checks if the printVal is less than or equal to countLimit.

While this statement is true, the program will continue printing the required output

See attachment for complete program

The .cpp code is avaiable bellow

Code:

#include <stdio.h>

#include <string.h>

int main()

{

    char **kW;

    char *fN;

    int nW = 0;

    kW = malloc(5000 * sizeof(char*));

    for (int i = 0; i<5000; i++)

    {

         kW[i] = (char *)malloc(15);

    }

    fN = (char*)malloc(25);

    int choice;

    while (1)

    {

         printf("1) File text to use as cipher\n");

         printf("2) Make a cipher with the input text file and save result as output file\n");

         printf("3) Decode existing cipher\n");

         printf("4) Exit.\n");

         printf("Enter choice: ");

         scanf("%d", &choice);

         if (choice == 1)

         {

             nW = readFile(kW, fN);

         }

         else if (choice == 2)

         {

             encode(kW, fN, nW);

         }

         else

         {

             Exit();

         }

         printf("\n");

    }

    return 0;

}

int readFile(char** words, char *fN)

{

    FILE *read;

    printf("Enter the name of a cipher text file:");

    scanf("%s", fN);

    read = fopen(fN, "r");

    if (read == NULL)

    {

         puts("Error: Couldn't open file");

         fN = NULL;

         return;

    }

    char line[1000];

    int word = 0;

    while (fgets(line, sizeof line, read) != NULL)

    {

         int i = 0;

         int j = 0;

         while (line[i] != '\0')

         {

             if (line[i] != ' ')

             {

                  if (line[i] >= 65 && line[i] <= 90)

                  {

                       words[word][j] = line[i]; +32;

                  }

                  else

                  {

                       words[word][j] = line[i];

                  }

                  j++;

             }

             else

             {

                  words[word][j] = '\n';

                  j = 0;

                  word++;

             }

             i++;

         }

         words[word][j] = '\n';

         word++;

    }

    return word;

}

void encode(char** words, char *fN, int nwords)

{

    char line[50];

    char result[100];

    if (strcmp(fN, "") == 0)

    {

         nwords = readFile(words, fN);

    }

    getchar();

    printf("Enter a secret message(and press enter): ");

    gets(line);    

    int i = 0, j = 0;

    int w = 0, k = 0;

    while (line[i] != '\0')

    {        

         if (line[i] >= 65 && line[i] <= 90)

         {

             line[i] = line[i] + 32;

         }

         w = 0;

         int found = 0;

         while (w<nwords)

         {

             j = 0;

             while (words[w][j] != '\0')

             {

                  if (line[i] == words[w][j])

                  {

                       printf("%c -> %d,%d \n", line[i], w, j);

                       found = 1;

                       break;

                  }

                  j++;

             }

             if (found == 1)

                  break;

             w++;

         }

         i++;

    }

    result[k] = '\n';

}

void Exit()

{

    exit(0);

}

Answer:

Your answer is option C, or the third option.

They do not let the user type in letters, numbers, and words.

Explanation:

Strings are defined as a sequence of characters literal, constant, or variable. These sequences are like an array of data or list of code that represents a structure. Formally in a language, this includes a finite(limited) set of symbols derived from an alphabet. These characters are generallu given a maximum of one byte of data each character. In longer languages like japanese, chinese, or korean, they exceed the 256 character limit of an 8 bit byte per character encoding because of the complexity of the logogram(character representing a morpheme((which is the simpliest morphological(form or structure) unit of language with meaning)) character with 8 bit (1 byte, these are units of data) refers to cpu(central processing unit) which is the main part of a computer that processes instructions, and sends signals.

Answer: F

Explanation: Have a Great Day!

Answer:

MATERWELON

Explanation:

Answer:

1 Select a message

2 Locate the delete group on the ribbon

3 Click the junk button

4 Select junk email options

5 Choose one of the protection levels

Explanation:  

Correct on Edg 2021

Answer:

In this Order:

Select Message, Locate delete group, click the junk, choose one of the...

Explanation:

Edg 2021 just took test

In python:

number = input("Enter your number ")

i = 0

while i < len(number):

   print(number[i])

   i += 1

Answer:

The answer is "Option c".

Explanation:

It is an internal page reference which, whilst also completely new pages, allow navigating around the current page. They are largely used only for bypassing and 'skipping' across redundant web page content by voice command users, that's why the CJ would use a skip link to enable those users to bypass specific navigation, and he also wants to put this link on the right, but first, he needs to use the left property.

In python:

kilos = int(input("Enter the number of kilometers: "))

print(f"The number of nautical miles is {round(kilos/1.852,2)}")

I hope this helps!

For an input of 100 kilometers, the program displays "The number of nautical miles is 54.00."

To convert kilometers to nautical miles based on the given approximations.

Here are the simple steps to write the code:

1. Define a function called km_to_nautical_miles that takes the number of kilometers as input.

2. Multiply the number of kilometers by the conversion factor [tex](90 / (10000 \times 60))[/tex] to get the equivalent number of nautical miles.

3. Return the calculated value of nautical miles from the function.

4. Prompt the user to enter the number of kilometers they want to convert.

5. Read the user's input and store it in a variable called kilometers.

6. Call the km_to_nautical_miles function, passing the kilometers variable as an argument, to perform the conversion.

7. Store the calculated value of nautical miles in a variable called nautical_miles.

8. Display the result to the user using the print function, formatting the output string as desired.

Now the codes are:

def km_to_nautical_miles(km):

   nautical_miles = (km * 90) / (10000 * 60)

   return nautical_miles

kilometers = float(input("Enter the number of kilometers: "))

nautical_miles = km_to_nautical_miles(kilometers)

print(f"The number of nautical miles is {nautical_miles:.2f}.")

The output of this program is:

The result is displayed to the user as "The number of nautical miles is 54.00."

To learn more about programming visit:

https://brainly.com/question/14368396

#SPJ4

Answer:

A. a type of software that is open to the public and can be modified.

Explanation:

Open-source refers to anything that is released under a license in which the original owner grants others the right to change, use, and distribute the material for any purpose.

Open-source code software is described as a type of software that is open to the public and can be modified. The correct option is A.

Open-source software is computer software that is distributed under a licence that allows users to use, study, change, and distribute the software and its source code to anyone and for any purpose.

Open-source software can be created collaboratively and publicly. Open-source refers to anything that is released under a licence that allows others to change, use, and distribute the material for any purpose.

Therefore, open-source code software is defined as software that is freely available to the public and can be modified. A is the correct answer.

To know more about open-source code follow

https://brainly.com/question/15039221

#SPJ6

Solution:

def add_spaces(s):

   result = ""

   for i in range(len(s)-1):

       result += (s[i]+" ")

   result += s[-1]

   return result

# Testing  

print(add_spaces('hello'))

print(add_spaces('hangman'))

print(add_spaces('x'))

And the output will be

hello

hangman

x

Process finished with exit code 0

Answer:

8 Questions You Should Absolutely Ask An Interviewer

QUESTION #1: What do the day-to-day responsibilities of the role look like? ...

QUESTION #2: What are the company's values? ...

QUESTION #3: What's your favorite part about working at the company? ...

QUESTION #4: What does success look like in this position, and how do you measure it?

Explanation:

I hope this answer is Wright ,So please mark as brainlist answers

Answer:

For large type, such as a title

Explanation:

i tried all of the answer's til i got the right one

The best scenario to use a display font is that it makes the requirement to type large, such as a title. Thus, the correct option is D.

A display font may be defined as the arrangement of words with respect to the requirement that makes the writing more attractive, effective, and understandable.

Display font is utilized in order to determine how a font face is represented based on whether and when it is downloaded and ready to use.

Display fonts generally include large types of texts which are used to frame a title. This makes the title more attractive, effective, and ready to read from a long distance as well.

A title is the main characteristic that influences the readers about the writing.

Therefore, the best scenario to use a display font is that it makes the requirement to type large, such as a title. Thus, the correct option is D.

To learn more about fonts, refer to the link:

https://brainly.com/question/14052507

#SPJ2

Answer:

A computer is a digital device that you can do things on such as play games, research something, do homework.

Explanation:

Answer:

A computer can be best described as an electronic device that works under the control of information stored in it's memory.

There are also types of computers which are;

Answer:

It is called Borders..can also be drawn around paragraphs and pages..

Answer:

A) project system

Explanation:

The SAP ERP is a planning software that incorporates the business function of an organization. The business function are Operations, Financials,  Human Capital Management and Corporate Services.

SAP Project System is a tool (functional module) that is integrated with the SAP Enterprise Resource Planning (SAP ERP) system allowing users to direct funds and resources as well as controlling each stage of the project. It also allow users to define start and end date of the project.

Answer:

Follows are the code to this question:

#include<iostream>//defining header file

#include<string>//defining header file

using namespace std;

const double Pi =3.141592653589793238463;//defining double constant variable

class Planet  

{

private:

string planet_name;//defining string variable

double radius;//defining double variable

public:

Planet()//defining default constructor

{

this->planet_name="";//use this keyword to hold value

this->radius=0.0;//use this keyword to hold value

}

Planet(string name, double radius)//defining parameterized constructor  

{

this->planet_name = name;//use this keyword to hold value

this->radius=radius;//use this keyword to hold value

}

string getName() const//defining getName method  

{

return this->planet_name;//use return keyword for return string value

}

double getRadius() const//defining getRadius method  

{

return this->radius;//use return keyword for return radius value

}

double getVolume() const //defining getVolume method

{

return 4*radius*radius*radius*Pi/3;////use return keyword for return volume value

}

};

int maxRadius(Planet* planets, int s)//defining a method maxRadius that accept two parameter

{

double maxRadius=0;//defining double variable

int index_of_max_radius=-1;//defining integer variable

for(int index=0; index<s; index++)//defining for loop for calculate index of radius  

{

if(planets[index].getRadius()>maxRadius)//defining if block to check radius

{

maxRadius = planets[index].getRadius();//use maxRadius to hold value

index_of_max_radius=index;//hold index value

}

}

return index_of_max_radius;//return index value

}

int main()//defining main method

{

Planet planets[5];//defining array as class name

planets[0] = Planet("On A Cob Planet",1234);//use array to assign value  

planets[1] = Planet("Bird World",4321);//use array to assign value

int idx = maxRadius(planets,2);//defining integer variable call method maxRadius

cout<<planets[idx].getName()<<endl;//print value by calling getName method

cout<<planets[idx].getRadius()<<endl;//print value by calling getRadius method

cout<<planets[idx].getVolume()<<endl;//print value by calling getVolume method

}

Output:

Bird World

4321

3.37941e+11

Explanation:

please find the complete question in the attached file:

In the above-program code, a double constant variable "Pi" is defined that holds a value, in the next step, a class "Planet" is defined, in the class a default and parameter constructor that is defined that hold values.

In the next step, a get method is used that return value, that is "planet_name, radius, and volume".

In the next step, a method "maxRadius" is defined that accepts two-parameter and calculate the index value, in the main method class type array is defined, and use an array to hold value and defined "idx" to call "maxRadius" method and use print method to call get method.  

Answer:

You can combine several images to

create one image.   -------Layers

You can make selections of irregular

shapes.  ----------- Lasso

You can draw rectangles, circles,

and other geometric shapes.-- Drawing

You can select areas based on

color.------Magic Wand

Explanation:

Graphic design software is used to create, edit, and view graphic art. Graphic design software comes in a wide variety of forms, each with a unique set of tools and features.

These software programs allow graphic designers to produce, edit, store, and manage their creative output, including pictures, images, videos, presentations, brochures, and other visual forms.

They can be installed to run from a desktop computer or provided as a cloud-based service. Users can format layouts, generate multimedia, stylize or edit photos, and create graphics, depending on the software.

Therefore, You can combine several images to create one image.   -------Layers. You can choose from a variety of strange shapes. —- Lasso. You can draw rectangles, circles, and other geometric shapes.-- Drawing. Furthermore, you can select areas based on color.------Magic Wand.

Learn more about graphic design tool here:

https://brainly.com/question/9105717

#SPJ5

Answer:

Written in Python

names = []

times = []

for i in range(0,3):

     nname = input("Name "+str(i+1)+": ")

     names.append(nname)

     time = input("Time "+str(i+1)+": ")

     times.append(time)

if times[2]>=times[1] and times[2]>=times[0]:

     print(names[2]+" "+times[2])

     if times[1]>=times[0]:

           print(names[1]+" "+times[1])

           print(names[0]+" "+times[0])

   else:

           print(names[0]+" "+times[0])

           print(names[1]+" "+times[1])

elif times[1]>=times[2] and times[1]>=times[0]:

     print(names[1]+" "+times[1])

     if times[2]>times[0]:

           print(names[2]+" "+times[2])

           print(names[0]+" "+times[0])

     else:

           print(names[0]+" "+times[0])

           print(names[2]+" "+times[2])

else:

     print(names[0]+" "+times[0])

     if times[2]>times[0]:

           print(names[2]+" "+times[2])

           print(names[1]+" "+times[1])

     else:

           print(names[1]+" "+times[1])

           print(names[2]+" "+times[2])

Explanation:

I've added the full source code as an attachment where I used comments to explain difficult lines

Answer:

public class Main

{

public static void main(String[] args) {

 System.out.println(min(3, -2, 7));

}

public static int min(int n1, int n2, int n3){

    int smallest = Math.min(Math.min(n1, n2), n3);

    return smallest;

}

}

Explanation:

*The code is in Java.

Create a method named min that takes three parameters, n1, n2, and n3

Inside the method:

Call the method Math.min() to find the smallest among n1 and n2. Then, pass the result of this method to Math.min() again with n3 to find the min among three of them and return it. Note that Math.min() returns the smallest number among two parameters.

In the main:

Call the method with parameters given in the example and print the result

Methods are named program statements that are executed when called/invoked.

The method in Python, where comments are used to explain each line is as follows:

#This defines the method

def mmin(a,b,c):

   #This calculates the smallest of the three values using math.min

   minNum = min(a,b,c)

   #This prints the smallest value

   return minNum

Read more about methods at:

https://brainly.com/question/14284563

Answer:

A variable name misspelling.

Explanation:

A Syntax Error that occurs as the result of a variable name that is misspelled will not be highlighted.

On edg 2020

Answer:

A variable name misspelling.

Ex planation:

A

Answer:

Temporary Internet Files folder

Explanation:

Assuming that your friend is using the Microsoft Windows 10 operating system, then this document would have gotten saved in the Temporary Internet Files folder within the operating system. This folder can be located within the following address in the operating system

C:\Users\[username]\AppData\Local\Microsoft\Windows\INetCache

Navigating to this address would help you find the folder and inside that should be the Microsoft Word document that you have used in your Internet Explorer Browser. This folder is where all browser files get saved when they are not explicitly downloaded to a specific folder but are still used within the browser.

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The versioning information refers to the version of the software that a system is running. Versioning of software is the creation and managing of multiple releases of software that all have the same general functionality but improved, modified, upgraded, and customized.

so the correct answer to this question is version information refers to the version of a software that a system is running.  

Other options are not correct, because the term version mostly used for software, web application, and web, API services.

The best term use for a version of monitor and PC is model number and also noted that virus detecting software can have version number but the virus itself doesn't have any version number.

So all other options of this question are incorrect except the first option that is:- Versioning information refers to the version of the software that a system is running.

Answer:

Written in C Language

#include <stdio.h>

int main() {

   int num1, num2;

   printf("Enter two integers: ");

   scanf("%d", &num1);

   scanf("%d", &num2);

   if(num1 <= num2){

   for(int i = num1; i<= num2; i+=10)

   {

       printf("%d",i);   printf(" ");

   }    

   }

   return 0;

}

Explanation:

This line declares two integer variables

  int num1, num2;

This line prompts user for input of the two numbers

   printf("Enter two integers: ");

The next two lines get integer input from the user

   scanf("%d", &num1);

   scanf("%d", &num2);

The following if statement checks if num1 is less than or equal to num2

   if(num1 <= num2){

The following iteration prints from num1 to num2 at an increment of 10

   for(int i = num1; i<= num2; i+=10)

   {

       printf("%d",i);   printf(" ");

   }    

Answer:

You may see:

The taskbar

The startmenu

Program icons within the taskbar

Shortcuts

Documents

Folders

Media files

Text files

The Recycle Bin

and so on...