Answer:
The correct option is d. banner
Explanation:
According to the given situation, Tramon develops the website and wants to involve the striking graphic so the website could be identified.
This represents the banner as the banner shows the advertisement i.e. image based rather than text based where the company information is displayed and its a way to promote the brand of the company so that it creates an awareness among the audience this results in increase in the sales of the company that directly rise the profits.
hence, the correct option is d. banner
Your manager has tasked you with implementing security controls to mitigate IP spoofing attacks against your network. IP spoofing is a method of attack that involves sending packets to a target network while hiding the attacker's address using a false source address.
What method outlined would achieve anti-spoofing, to mitigate private IP spoofing attacks against your network?
Answer:
You can setup firewall rules with for example iptables on Linux. The rules should block source addresses of private IP ranges such as 192.168.*.* and 10.*. *. * etc. Check private IP ranges for full list.
It will however not guarantee prevention of IP spoofing in general as its not possible to prevent such attacks. Its the responsibility of ISPs. But the question asked for private IP spoofing and then the above works.
The concept of the value chain focus on
Answer:
The overarching goal of a value chain is to deliver the most value for the least cost in order to create a competitive advantage.
Your Welcome:)
HELP URGENTLY!!!!!
Elly supervises an eye doctors office. The office recently received new equipment. To keep that equipment working accurately and dependably, she should:
(Select all that apply.)
Copy the users manual and distribute to all the employees
Identify individuals to complete the tasks
Create a log to document maintenance
Set up auto reminders
Read the manual
List the maintenance tasks
Establish the frequency of the maintenance tasks
Update the software in the office
Note that where Elly supervises an eye doctor's office, and the office recently received new equipment, to keep that equipment working accurately and dependably, she should:
Copy the users manual and distribute to all the employeesCreate a log to document maintenanceSet up auto remindersRead the manualList the maintenance tasksEstablish the frequency of the maintenance tasksUpdate the software in the office.What is the rationale for the above response?In order to ensure that the equipment is working properly and optimally, Elly should distribute the user manual to all employees.
In addition, she should identify individuals to complete maintenance tasks, create a log to document maintenance, set up auto reminders, read the manual, list the maintenance tasks, establish the frequency of the maintenance tasks, and update the software in the office to keep new equipment working accurately and dependably. This will ensure optimal equipment maintenance and lifetime.
Learn more about equipment maintenance:
https://brainly.com/question/21853224
#SPJ1
Building-block elements are available in the Building Blocks grouping include which of the following? Page Parts Calendars Advertisements Business Information
Answer: Page parts , calendar and advertisements
Explanation:
(I jus Finish the assignment)
server.
10. The Domain Name refers to the
a) Mail
b) Google
c) Internet
d) Local
Answer:
C.
Explanation:
The coding system that has just two characters is called:
a
binary
b
dual.
c
basic.
d
double.
Answer:
A. Binary
Definition:
Pertaining to a number system that has just two unique digits 0 and 1. - binary code
Q Basic program write a program in Q Basic to find the cost of 10 pens when the cost of 15 pens is 75 use unitary method to find calculate the cost of one pen calculate the print of cost of 10 pen computer answer
give the function of cpu
HELP !!!
Which of the following statements best represents the difference in printing text and images in the era of moveable type?
Text was harder to print than images because it involved moving letters around for each line of print.
Text was created by arranging letter blocks, while images were created through an engraving process.
Text was created by engraving letter blocks on metal, while images were created by burning imprints onto wood.
Text was easier to print than images because it involved the same 26 letters used over and over.
Answer:
I think the answer is: Text was created by arranging letter blocks, while images were created through an engraving process.
Explanation:
in the article it explains these were the ways text and images were printed
Answer:
e
Explanation:
The router can deliver packets directly over interfaces 0 and 1 or it can forward packets to Routers R2, R3, or R4. Describe what the router does with a packet addressed to each of the following destinations:
a. 128.96.39.10
b. 128.96.40.12
c. 128.96.40.151
d. 192.4.153.17
e. 192.4.153.90
Answer:
Following are the solution to this question:
Explanation:
In point A:
It applies the AND operation with the subnet-mask that is
[tex]=128.96.39.00001010 \ \ AND \ \ 255.255.255.10000000 \\\\= 128.96.39.0000000 \\\\= 128.96.39.0 \\\[/tex]
This corresponds to a 128.96.39.0 subnet. This is why the router sent the packet to 0.
In point B:
It applies the AND operation with the subnet-mask that is [tex]255.255.255.128[/tex]
[tex]= 128.96.40.00001100\ AND \ 255.255.255.10000000 \\\\ = 128.96.40.0000000\\\\= 128.96.40.0[/tex]
This suits the 128.96.40.0 subnet. The router then sent R2 to the packet. The packet.
In point C:
It applies the AND operation with the subnet-mask that is [tex]255.255.255.128[/tex]
[tex]=128.96.40.10010111 \ AND \ 255.255.255.10000000 \\\\= 128.96.40.1000000\\\\= 128.96.40.128[/tex]
It applies the AND operation with the subnet-mask that is [tex]255.255.255.192[/tex]
[tex]= 128.96.40.10010111 \ AND \ 255.255.255.11000000 \\\\= 128.96.40.1000000 \\\\= 128.96.40.128\\[/tex]
All of the matches of its sublinks above.
Its default R4 router was therefore sent to the router by router.
In point D:
It applies the AND operation with the subnet-mask that is [tex]255.255.255.192[/tex]
[tex]= 192.4.153.00010001 \ AND \ 255.255.255.11000000\\\\ = 192.4.153.0000000 \\\\= 192.4.153.0 \\\\[/tex]
It matches the 192.4.153.0 subnet. It router has sent packet to R3 then.
In point E:
It applies the AND operation with the subnet-mask that is [tex]255.255.255.128[/tex]
[tex]= 192.4.153.01011010\ AND \ 255.255.255.10000000 \\\\= 192.4.153.0000000 \\\\= 192.4.153.0[/tex]
There, neither of the subnet inputs correlate with the ip address with the same subnet mask.
It applies the AND operation with the subnet-mask that is [tex]255.255.255.192[/tex]
[tex]=192.4.153.01011010\ AND \ 255.255.255.11000000 \\\\ = 192.4.153.0100000 \\\\= 192.4.153.64[/tex]
It does not correlate to the subnet entries for same subnet mask, and therefore neither of the entries matches their corresponding ip address entries.
Mask of the subnet. That packet would therefore be sent to the default R4 router by the router.
You are adding more features to a linear regression model and hope they will improve your model. If you add an important feature, the model may result in.
1. Increase in R-square
2. Decrease in R-square
A) Only 1 is correct
B) Only 2 is correct
C) Either 1 or 2
D) None of these
Answer:
The answer is "Option A".
Explanation:
Add extra functionality, otherwise, it increases the R-square value, which is defined in the following points:
To incorporate essential elements, R-square is explicitly promoted. It Increases the R-square value, which is an additional feature. It removes the features, which provide the value of the reduce R-square. After incorporating the additional features is used as the model, which is R-square, which is never reduced.I need help with my homework:
Greetings, secret agent 00111! Your mission, should you choose to accept it, is to help Agent M plan a pizza party. Unfortunately, M has no idea how much pizza to order for his 83 guests. Luck for him, party planning is your specialty! Estimate the number of pizzas he’ll need on scratch paper, and then convert that number to binary and write it here.
Answer:
You need to order 11100 pizzas.
Explanation:
A couple of assumptions here.
Each pizza has 12 slices. Each guest will eat 4 slices (1/3 of a pizza).
83 * 1/3 = 28 pizzas
28 = 11100
Which class members should be declared as public?
a
Data attributes and constructor methods
b
Data attributes only
c
Methods and occasionally final attributes
d
Predominantly data attributes and some helper methods
Answer:
B. Methods and occasionally final attributes
Explanation:
In Computer programming, class members can be defined as the members of a class that typically represents or indicates the behavior and data contained in a class.
Basically, the members of a class are declared in a class, as well as all classes in its inheritance hierarchy except for destructors and constructors.
In a class, member variables are mainly known as its attributes while its member function are seldomly referred to as its methods or behaviors.
One of the main benefits and importance of using classes is that classes helps to protect and safely guard their member variables and methods by controlling access from other objects.
Therefore, the class members which should be declared as public are methods and occasionally final attributes because a public access modifier can be accessed from anywhere such as within the current or external assembly, as there are no restrictions on its access.
Write a function named minMax() that accepts three integers arguments from the keyboard and finds the smallest and largest integers. Include the function minMax() in a working program. Make sure your function is called from main().Test the function by passing various combinations of three integers to it.
Answer:
public class Main
{
public static void main(String[] args) {
minMax(1, 2, 3);
minMax(100, 25, 33);
minMax(11, 222, 37);
}
public static void minMax(int n1, int n2, int n3){
int max, min;
if(n1 >= n2 && n1 >= n3){
max = n1;
}
else if(n2 >= n1 && n2 >= n3){
max = n2;
}
else{
max = n3;
}
if(n1 <= n2 && n1 <= n3){
min = n1;
}
else if(n2 <= n1 && n2 <= n3){
min = n2;
}
else{
min = n3;
}
System.out.println("The max is " + max + "\nThe min is " + min);
}
}
Explanation:
*The code is in Java.
Create a function named minMax() that takes three integers, n1, n2 and n3
Inside the function:
Declare the min and max
Check if n1 is greater than or equal to n2 and n3. If it is set it as max. If not, check if n2 is greater than or equal to n1 and n3. If it is set it as max. Otherwise, set n3 as max
Check if n1 is smaller than or equal to n2 and n3. If it is set it as min. If not, check if n2 is smaller than or equal to n1 and n3. If it is set it as min. Otherwise, set n3 as min
Print the max and min
Inside the main:
Call the minMax() with different combinations
how can i fix my code so that a teepee is properly formed? here is what i currently have (my output is uploaded as an image):
public static void teepee(int a){
for(int i=a; i>0; i--){
for(int j=a; j>0; j--){
System.out.print(" ");
}
System.out.print("/");
for(int k=i; k
System.out.print(" ");
}
System.out.println("\\");
}
}
Which keyboard command would you use to navigate to the left adjacent cell in a worksheet?
Answer:
Either scroll on a mouse or use the left arrow key.
I don't know if this is right.
Answer:
shift+tab
Explanation:
briefly describe what a variable is
Answer:
In mathematics, a variable is a symbol or letter, such as "x" or "y," that represents a value. In algebraic equations, the value of one variable is often dependent on the value of another. Variables are also used in computer programming to store specific values within a program
Explanation:
a) Explain 3 phase Alternative Current with aid of diagram.
Three-phase electric power is a common method of alternating current electric power generation, transmission, and distribution. It is a type of polyphase system and is the most common method used by electrical grids worldwide to transfer power. It is also used to power large motors and other heavy loads.
A three-wire three-phase circuit is usually more economical than an equivalent two-wire single-phase circuit at the same line to ground voltage because it uses less conductor material to transmit a given amount of electrical power. Polyphase power systems were independently invented by Galileo Ferraris, Mikhail Dolivo-Dobrovolsky, Jonas Wenström, John Hopkinson and Nikola Tesla in the late 1880s.
Write a function named power that accepts two parameters containing integer values (x and n, in that order) and recursively calculates and returns the value of x to the nth power.
Answer:
Following are the code to the given question:
int power(int x, int n)//defining a method power that accepts two integer parameters
{
if (n == 0)//defining if block to check n equal to 0
{
return 1; //return value 1
}
else//defining else block
{
x = x * power(x, --n); //use x variable to call method recursively
}
return x; //return x value
}
Explanation:
In the above-given code, a method power is defined that accepts two integer variable in its parameter, in the method a conditional statement is used which can be defined as follows:
In the if block, it checks "n" value, which is equal to 0. if the condition is true it will return value 1.In the else block, an integer variable x is defined that calls the method recursively and return x value.A wireless network administrator is using 3 access points (APs) to cover an area. At some locations, all 3 APs may be in range of a single wireless device. What wireless channels should be assigned to the APs?
(Hint: Pick 3 different channels.)
a. 6
b. 7
c. 1
d. 3
e. 2
f. 4
g. 5
h. 8
i. 10
j. 9
k. 11
Answer:
A, C, and K
Explanation:
Wireless networks use access points ( APs) for wireless communication. The APs provide a collision avoidance channel for the connected devices. Devices communicating at a channel of a given frequency would experience signal interference, so all the connected APs in a wireless network is configured to operate in different channels with considerable differences in their frequencies.
Comprehension s best described as the ability to
Answer:
The ability to understand
Explanation:
Answer:
recognize reading strategies.
Explanation:
If you want a language that is relatively easy to write and which can be tested easily as it's being developed, you would choose an interpreter program.
a) True
b) False
True
False
Answer:
true
Explanation:
because it needs a interpreter so that it could be more developed
what is the CPU's role?
Answer:
The CPU performs basic arithmetic, logic, controlling, and input/output (I/O) operations specified by the instructions in the program. The computer industry used the term "central processing unit" as early as 1955.
Answer:
The Cpu is like the brain of the computer it's responsible for everything from running a program to solving a complex math equation.
I need help plz it’s python
Answer:
The output of the first question would be 9. And the answer the second question is 10.
the quality of the interpreter that shows the ability to envision future needs and demands and create products to meet these demands
A. Industries
B. innovative
C. Strategist
D. Risk Taker
Answer: B - Innovative
Explanation:
Write a method that accepts two string arrays and print common values between the two arrays (Perform case sensitive search while finding common values).
Answer:
public class Main
{
public static void main(String[] args) {
String[] s1 = {"Hi", "there", ",", "this", "is", "Java!"};
String[] s2 = {".", "hi", "Java!", "this", "it"};
findCommonValues(s1, s2);
}
public static void findCommonValues(String[] s1, String[] s2){
for (String x : s1){
for (String y : s2){
if(x.equals(y))
System.out.println(x);
}
}
}
}
Explanation:
*The code is in Java.
Create a method named findCommonValues that takes two parameters, s1 and s2
Inside the method:
Create a nested for-each loop. The outer loop iterates through the s1 and inner loop iterates through the s2. Check if a value in s1, x, equals to value in s2, y, using equals() method. If such a value is found, print that value
Inside the main method:
Initialize two string arrays
Call the findCommonValues() method passing those arrays as parameters
A scared kangaroo clears a fence that is 2.44 meters tall. What is the vertical component of the kangaroos velocity at take off ? If the horizontal component of the kangaroos velocity is 4.80 m per s at what angle did the kangaroo take off the ground? (hint: at its maximum height the kangaroos vertical velocity is 0)
Answer:
a) The vertical component of the kangaroo's velocity at take off is approximately 4.982 meters per second.
b) The angle at which the kangaroo took off the ground is approximately 46.066º.
Explanation:
a) According to the statement, the kangaroo has an initial horizontal velocity and jumps to overcome the fence until velocity becomes zero. If effects from non-conservative forces can be neglected, then we represent the situation of the kangaroo by Principle of Energy Conservation:
[tex]K_{1}+U_{g,1} = K_{2}+U_{g,2}[/tex] (Eq. 1)
Where:
[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final translational kinetic energies, measured in joules.
[tex]U_{g,1}[/tex], [tex]U_{g,2}[/tex] - Initial and final gravitational potential energies, measured in joules.
By definitions of translational kinetic and potential gravitational energies, we expand and simplify the equation above:
[tex]\frac{1}{2}\cdot m\cdot [(v_{1,x}^{2}+v_{1,y}^{2})-(v_{2,x}^{2}+v_{2,y}^{2})] = m\cdot g \cdot (y_{2}-y_{1})[/tex]
[tex]\frac{1}{2}\cdot [(v_{1,x}^{2}+v_{1,y}^{2})-(v_{2,x}^{2}+v_{2,y}^{2})] = g \cdot (y_{2}-y_{1})[/tex] (Eq. 2)
Where:
[tex]m[/tex] - Mass of the kangaroo, measured in kilograms.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]y_{1}[/tex], [tex]y_{2}[/tex] - Initial and final heights of the kangaroo above the ground, measured in meters.
[tex]v_{1,x}[/tex], [tex]v_{1,y}[/tex] - Vertical and horizontal initial velocities, measured in meters per second.
[tex]v_{2,x}[/tex], [tex]v_{2,y}[/tex] - Vertical and horizontal final velocities, measured in meters per second.
If we know that [tex]v_{1,x} = 4.80\,\frac{m}{s}[/tex], [tex]v_{2, x} = 0\,\frac{m}{s}[/tex], [tex]v_{2,y} = 0\,\frac{m}{s}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]y_{2}-y_{1} = 2.44\,m[/tex], then (Eq. 2) is reduced into this:
[tex]11.52+0.5\cdot v_{1,y}^{2}=23.929[/tex]
Lastly, we solve for [tex]v_{1,y}[/tex]:
[tex]0.5\cdot v_{1,y}^{2}=12.409[/tex]
[tex]v_{1,y}^{2} = 24.818[/tex]
[tex]v_{1,y} \approx 4.982\,\frac{m}{s}[/tex]
The vertical component of the kangaroo's velocity at take off is approximately 4.982 meters per second.
b) The angle at which the kangaroo took off the ground ([tex]\theta[/tex]), measured in sexagesimal degrees, is obtained by the following inverse trigonometric relation:
[tex]\theta =\tan^{-1}\left(\frac{v_{1,y}}{v_{1,x}} \right)[/tex] (Eq. 3)
[tex]\theta = \tan^{-1}\left(\frac{4.982\,\frac{m}{s} }{4.80\,\frac{m}{s} } \right)[/tex]
[tex]\theta \approx 46.066^{\circ}[/tex]
The angle at which the kangaroo took off the ground is approximately 46.066º.
If a small cheap computer can do the same thing as a large expensive computer,
why do people need to have a large one?
Answer:
Large ones are for more important thing. Such as gaming and special software.
Explanation:
Hope that helps
Large systems are the ones that are for more important thing. Such as gaming and special software.
Why is the size of a computer Important?Computer scientists and users value the classification of computers based on their size. It enables us to classify the computer system according to its size and processing capacity.
For gamers who desire the greatest possible gaming experience, expensive PCs are also wonderful.
You can play the most recent games smoothly and at high settings if you have a powerful computer. A costly PC also has the benefit of lasting longer than a less expensive model.
Most computer monitors have a diagonal measurement from corner to corner that falls between 19 and 34 inches. 22 to 24" screens will be sufficient for the majority of users.
Thus, it can be beneficial to use larger computers also.
For more details regarding computers, visit:
https://brainly.com/question/21080395
#SPJ2
A(n) ___________ analyzes traffic patterns and compares them to known patterns of malicious behavior.a. Intrusion prevention system b. intrusion detection system c. defense-in-depth strategy d. quantitative risk assessment
Answer:b. intrusion detection system
Explanation:
An intrusion detection system (IDS) helps to alert service administrators to detect suspicious or malicious activity by monitoring and analyzing specific patterns to network traffic. Most times, the IDS may be configured to respond to suspicious malicious traffic by blocking the cyber attacker making such IP address unable to access that particular network.
An intrusion detection system (IDS) can be either a Host Based Intrusion Detection Systems (HIDS) or a Network Based Intrusion Detection Systems (NIDS) depending on preference by the user.
It is therefore necessary for businesses who require high level of security to adopt good and effective intrusion detection systems so that the communication of information from businesses to businesses can be safeguarded and secure from cyber attacks.
what is the art of prolonging the life of the food items that are available
Answer:
Food preservation.
Explanation:
Food preservation can be defined as an art that typically deals with the process of preventing food spoilage by reducing or mitigating the growth of microorganisms and other external factors while maintaining the nutritional value, flavor and texture of the food.
Some of the factors that causes food spoilage include microorganisms (bacteria, yeast and molds), temperature, moisture content, oxidation etc.
Hence, food preservation is the art of prolonging the life of the food items that are available.
Basically, there are physical, chemical and biological methods which can be used to prolong the life of food items and thus sustaining the edibility and nutritional value of foods. These methods are;
1. Freezing.
2. Pasteurization.
3. Drying.
4. Retorting.
5. Thermal sterilization.
6. Fermentation.
7. Irradiation.
what do we use HTTP and HTML for?
HTML is a Language while HTTP is a Protocol.
HTML tags are used to help render web pages. The Hypertext Mark-up Language (or HTML) is the language used to create documents for the World Wide Web.
HTTP (Hypertext Transfer Protocol) is a protocol for transferring the hypertext pages from Web Server to Web Browser. HTTP is a generic and stateless protocol which can be used for other purposes as well using extensions of its request methods, error codes, and headers. Basically, HTTP is a TCP/IP based communication protocol, that is used to deliver data (HTML files, image files, query results, etc.) on the World Wide Web.
