Savanna is the type of vegetation that is characteristic of the tropical monsoon climate. The correct option is E.
The tropical monsoon climate is typically found in regions near the equator, where there is a distinct wet and dry season.
During the wet season, which usually lasts for several months, there is heavy rainfall and high humidity, which promotes the growth of vegetation such as grasses and small trees.
During the dry season, which can last for several months, there is little to no rainfall, and the vegetation may become dry and brown. The combination of wet and dry seasons in the tropical monsoon climate supports a diverse range of plant and animal life.
Thus, the ideal selection is option E.
Learn more about the tropical climate here:
https://brainly.com/question/885982
#SPJ4
What is El Nino and what does it cause world wide?
El Nino means to Little Boy in Spanish. South American fishermen were aware of long periods of unusually warm Pacific Ocean water in the 1600s.
Our weather is significantly impacted by El Nino. The warmer waters cause the Pacific jet stream to diverge south of its normal position. As a result of this trend, the northern U.S. and Canada are experiencing drier and warmer weather than usual. However, the Southeast and Gulf Coast regions of the United States are seeing greater flooding at this moment due to the unusually rainy weather.
Additionally, marine animals along the Pacific Ocean are significantly impacted by El Nino. In normal conditions, upwelling brings cold, nutrient-rich water from the bottom to the surface. El Nino reduces upwelling or causes it to stop totally. When the nutrients from the deep are gone, the phytoplankton off the beach decreases. El Nino causes a decline in the trade winds. Warm water rushes from the east to the west coast of the Americas.
Learn more about Trade Winds here:
https://brainly.com/question/1558204
#SPJ4
which of the following is incorrectly matched?a.weathering - exogenic breaking and dissolving the crustb.radioactive decay heat - exogenic energy sourcec.exogenic - external processesd.endogenic - internal processes
The following option is incorrectly matched: radioactive decay heat - exogenic energy source. Therefore the correct option is option B.
Radioactive decay heat is an endogenic, not an exogenic, energy source. Internal activities that begin within the Earth, such as volcanic activity, earthquakes, and tectonic plate movements, are examples of endogenic processes.
The decay of radioactive isotopes inside the Earth's mantle and crust produces radioactive decay heat, which is a substantial source of energy driving endogenic processes.
Weathering, erosion, and sedimentation, on the other hand, are exogenic processes that occur at or near the Earth's surface. Therefore the correct option is option B.
For such more question on radioactive:
https://brainly.com/question/13152774
#SPJ11
the physical removal and transport of material by mobile agent such as wind, water, or ice is called: group of answer choices mass wasting erosion weathering
The physical removal and transport of material by mobile agents such as wind, water, or ice is called erosion.
Erosion is a natural process that occurs when wind, water, or ice wears away the surface of the earth's crust and carries the material to other locations.
The agents of erosion act as mobile forces, transporting the material away from its original location and depositing it elsewhere.
For example, water erosion can occur when rivers and streams carry sediment downstream, gradually wearing away the rocks and soil along their path.
Wind erosion can occur when strong winds carry sand and dust particles from one location to another.
Ice erosion can occur when glaciers carve out valleys and move rocks and soil across the landscape. Erosion is an important process that shapes the earth's surface and creates unique landscapes over time.
to know more about erosion refer here:
https://brainly.com/question/17691748#
#SPJ11
1. how have we identified the different layers of the atmosphere? a. thermal characteristics (temperature changes) b. chemical composition c. movement d. density e. all of these answers 2. what do we call the boundaries where the greatest changes from one layer to the next occur? a. boundaries b. layers c. pauses d. dividers 3. which layer is considered to be the upper atmosphere? a. troposphere b. stratosphere c. mesosphere d. thermosphere 4. what causes the warming observed in the thermosphere? a. incoming high energy ultraviolet and x-ray radiation being absorbed by the molecules in this layer b. heat from all of the radiation released by all of the stars in space, except for the sun c. heat is produced as ozone is formed in this layer d. heat is released from the surface of the earth as infrared radiation
1. We have identified the different layers of the atmosphere using a combination of factors, including thermal characteristics, chemical composition, movement, and density.The correct option is e. all of these answers.
2. The boundaries where the greatest changes from one layer to the next occur are called "pauses." The correct option is c. pauses.
3. The upper atmosphere is considered to be the thermosphere. The correct option is d. thermosphere.
4. The warming observed in the thermosphere is primarily caused by incoming high-energy ultraviolet and x-ray radiation being absorbed by the molecules in this layer.The correct option is a.
to know more about layers of the atmosphere refer here:
https://brainly.com/question/25881294#
#SPJ11
What are the possible advantages of indirect extrusion, compared to direct extrusion? Explain.
Indirect extrusion is a process in which the billet is held stationary while the die moves towards it. This is in contrast to direct extrusion, where the billet is pushed through the die by a ram. There are several possible advantages to indirect extrusion:
Better surface finish: Because the billet is held stationary during the extrusion process, there is less friction between the billet and the walls of the container. This can result in a smoother surface finish on the extruded product.
Increased strength: Indirect extrusion can lead to a more uniform grain structure in the extruded product, which can improve its strength and durability.
More complex shapes: Indirect extrusion can be used to produce more complex shapes than direct extrusion. This is because the die can move in different directions, allowing for more intricate shapes to be extruded.
To know more about Indirect extrusion
brainly.com/question/30554658
#SPJ4
what is the main reason for the difference in climate between fargo, north dakota and seattle, washington? group of answer choices proximity to water latitude elevation pressure differences air circulations
Answer:
Troposphere.
Explanation:
eoliberal TINA-touts or with alter-globalization activists?
Export led development
It is Neoliberal globalization with TINA-touts. According to the export-led growth hypothesis (ELGH), increasing exports is one of the key factors influencing growth.
According to this theory, governments can achieve overall growth by boosting exports as well as labor and capital inputs into the economy. Growing export sales bring in money and profits for enterprises, and through the acceleration effect, this can lead to a rise in capital expenditures.
Increased investment boosts a nation's capacity for production, which in turn boosts export potential. When effective exports of products and services from one nation to another occur, a sizable portion of the growth in real GDP, employment, and per capita income results.
Learn more about export led development here:
https://brainly.com/question/29641746
#SPJ4
What process of magma generation is most likely responsible for the ancient lava flows seen on the Moon's surface?
Answer:
The ancient lava flows seen on the Moon's surface are most likely a result of partial melting of the Moon's mantle caused by a combination of radioactive decay and residual heat left over from the Moon's formation. This process of magma generation is known as "partial melting" or "melting by decompression." As the mantle rocks slowly rise and undergo a reduction in pressure, some of the minerals in the rocks begin to melt and form magma, which then rises to the surface and solidifies to form lava flows.
Explanation:
which condition would be expected to slow the rate of movement of water through the global water cycle? increased diversion of surface freshwater into groundwater reservoirs reduced winds reduced precipitation over oceans increased solar radiation
Reduced precipitation over oceans, condition would be expected to slow the rate of movement of water through the global water cycle. Thus, option (c) is correct.
Which both go through the impact that variations in precipitation can have on the water cycle. Significant effects on the global water cycle may result from decreased precipitation over oceans.
Particularly, less water entering the cycle would result from less precipitation over oceans, which would slow the water's flow through the cycle.
Therefore, option (c) is correct.
Learn more about on water cycle, here:
https://brainly.com/question/1151425
#SPJ12
Porque en la costa es occidental de Sudamérica hay muchos volcanes y se producen continuamente terremotos y sin embargo en la costa occidental de Africa es muy estable y no hay volcanes ni se producen terremotos
Translation- Because on the western coast of South America there are many volcanoes and earthquakes occur continuously, and yet on the western coast of Africa it is very stable and there are no volcanoes or earthquakes.
The boundaries of tectonic plates determine various geological features of the location, a areas geological activity is determined by its location and the tectonic plates inside the earth.
A region where multiple tectonic plates converge is known as the- Ring of Fire, and it includes the western coast of South America. When two plates collide, tectonic zones are formed, where one plate slides under the other and an earthquake or a volcano may result.
comparatively, there are no active tectonic plate boundaries near Africa's western coast. This region's stability can be result to its location on a stable tectonic plate.
Learn more about Ring of Fire at:
brainly.com/question/14703823
#SPJ4
the image below shows stalactites on the ceiling of a cave in texas. rainwater dissolves calcium carbonate from the limestone in the soil. the water with dissolved calcium carbonate soaks into the ground towards the caves. some of the water drips to the floor when it reaches the cave and collects in a pool. when the water does not drip, it evaporates, leaving the calcium carbonate that form the stalactites. image which event in the formation of stalactites is an example of erosion? rainwater dissolves calcium carbonate from the limestone in the soil. the water with dissolved calcium carbonate soaks into the ground toward the caves. some of the water collects in a pool on the floor of the cave. some of the water evaporates, leaving the calcium carbonate. ...
Event 1 - Rainwater dissolves calcium carbonate from the limestone in the soil - is an example of weathering. Weathering is the breakdown of rocks, soils, and minerals through contact with the Earth's atmosphere, waters, or living organisms.
In this case, rainwater dissolves the calcium carbonate from the limestone in the soil, which is a type of chemical weathering. This reaction dissolves the calcium carbonate in the limestone, causing it to weather or erode. The dissolved calcium carbonate then travels through the soil towards the cave, where it can eventually form stalactites. The other events, such as the water soaking into the ground, collecting in a pool, and evaporating, are examples of physical processes or deposition, not weathering.
Learn more about “ Earth's atmosphere, “ visit here;
https://brainly.com/question/31390646
#SPJ4
Complete Question
The image below shows stalactites on the ceiling of a cave in Texas. Rainwater dissolves calcium carbonate from the limestone in the soil. The water with dissolved calcium carbonate soaks into the ground towards the caves. Some of the water drips to the floor when it reaches the cave and collects in a pool. When the water does not drip, it evaporates leaving the calcium carbonate that form the stalactites.
Which event in the formation of stalactites is an example of weathering?
1- Rainwater dissolves calcium carbonate from the limestone in the soil.
2- The water with dissolved calcium carbonate soaks into the ground towards the caves.
3- Some of the water collects in a pool on the floor of the cave.
4- Some of the water evaporates leaving the calcium carbonate.
A form of subsistence agriculture based on the herding of domesticated animals. Pastoral refers to sheep-herding. Primarily the dry lands of South-west Asia and North Africa, Central Asia, and East Asia. Live in arid and semiarid land. Chose types and number of animals for herd based on local culture and physical characteristics. Depends on prestige of animals and the ability of the species to adapt to a particular climate and vegetation. Camel most desirable in North Africa and Southwest Asia, along with sheep and goat. HORSE in Central Asia.
Camels: well suited to arid climates, can go long periods without water, carry heavy baggage, and move fast. 12 months to have babies
Goats: need more water than camels but are tough and agile and can survive on almost all vegetation.
Sheep: slow, and affected by climate change, require more water than both camels and goats, ad more selective about eating.
Application: Dry climates. Only 15 million people are pastoral nomads. Sparsely occupy 20% of Earth's land area. Pastoral nomads consume more grain than meat. Many present day nomads grow grains.
Example: Places where planting is impossible
The Bedouins of Saudi Arabia and North Africa and the Masai of East Africa.
Nomad family typically needs 25-60 goats or sheep or 10-25 camels
Only invade other nomads territory in emergency or war. Every group controls a piece of territory. Goal is to control a territory large enough to contain the forage, water, for survival. Amount of land owned depends on it's wealth and power
TRANSHUMANCE: seasonal migration or livestock between mountains and lowland pasture areas.
The form of subsistence agriculture based on the herding of domesticated animals is called pastoralism.
Pastoralism is largely practised in the world's arid and semi-arid regions, such as South-west Asia and North Africa, Central Asia, and East Asia. Pastoralists rely on domesticated animals for a living, such as sheep, goats, and camels, and migrate their herds across the landscape in search of food and water.
Pastoralists select the sorts and amount of animals for their herd depending on local culture and physical traits, such as the species' capacity to adapt to a specific climate and vegetation. Camels, sheep, and goats are preferred in North Africa and Southwest Asia, whereas horses are chosen in Central Asia.
For such more question on agriculture:
https://brainly.com/question/30049812
#SPJ11
Albedo is the ______.A. radiation emitted from the Earth at a particular location.B. redirection of visible light due to particles in the atmosphere.C. reflectivity of a surface.D. intensity of a wavelength.
Albedo is the measure of the reflectivity of a surface, specifically the percentage of incoming solar radiation that is reflected back into space. Option C.
A high albedo means that a surface reflects a larger portion of the incoming radiation, while a low albedo means that a surface absorbs more radiation.
This can have significant effects on the Earth's climate and temperature, as surfaces with high albedo, such as ice and snow, reflect more radiation back into space, helping to cool the planet. In contrast, surfaces with low albedo, such as dark forests and oceans, absorb more radiation, contributing to warming.
The albedo of a surface can be affected by a number of factors, including the presence of clouds, particles in the atmosphere, and changes in land use. Overall, albedo is an important factor to consider in understanding and predicting climate change.
To know more about solar radiation refer here:
https://brainly.com/question/16525532#
#SPJ11
as the energy needs for virginia increase, new sources of energy are required to replace or supplement the nonrenewable sources of energy now in use. two sources of energy that are renewable and available in virginia are -
The sources of non-renewable energy will deplete or not be renewed within our lifetimes, or perhaps within many, many lifetimes. Coal, oil, and natural gas are the main fossil fuels used as non-renewable energy sources. The primary component of fossil fuels is carbon.
Natural resources that cannot be easily replenished by natural means at a rate quick enough to keep up with us are considered non-renewable resources. Fossil fuels made of carbon are one instance. With the use of heat and pressure, the original biological matter transforms into fuel like petrol or oil.
Learn more about Non-renewable energy here:
https://brainly.com/question/27430407
#SPJ4
Identify the two phase changes processes that play key roles in the vertical latent heat flux through the atmosphere: _____ and _____.A. freezing; meltingB. evaporation; depositionC. evaporation; condensationD. melting; evaporationE. freezing; evaporation
The two phase change processes that play key roles in the vertical latent heat flux through the atmosphere are evaporation and condensation. Option C.
Evaporation is the process of transforming liquid water into water vapor, which is a gas. This phase change process requires heat energy to break the bonds between the water molecules, allowing them to escape into the air.
Condensation, on the other hand, is the opposite process, where water vapor is transformed into liquid water. This phase change process releases heat energy as the water molecules come together and form liquid droplets.
Both of these processes are important for the vertical transport of heat and moisture in the atmosphere, as they involve the exchange of energy between the atmosphere and the surface, as well as between different layers of the atmosphere.
The latent heat released or absorbed during these phase changes can have a significant impact on weather patterns and climate.
To know more about evaporation refer here:
https://brainly.com/question/28319650#
#SPJ11
Magmas at convergent subduction margins tend to be what composition?
Magmas at convergent subduction margins tend to be Silica and magnesium composition.
Basalt melts from convergent edges contain low Silica levels and high Magnesium contents, just as basalt melts from other tectonic settings. In general, partial mantle melting takes place when the subduction zone is 100–130 km below the surface. Basalt is a kind of primordial magma created by mantle melting.
The original magmas in most volcanic locations are mafic in composition, but they can transform into more felsic types through contact with crustal rock and as a result of crystals settling in a magma chamber. Mafic magmas often have lower gas concentrations and are more viscous than felsic magmas. Felosic magmas are under more pressure and are more likely to erupt explosively because they have a higher viscosity, which prevents gases from escaping.
Learn more about Magma here:
https://brainly.com/question/23661578
#SPJ4
TRUE OR FALSE 91) A frontier is a land area whereas a boundary is a political invention.
TRUE. A frontier is a land area whereas a boundary is a political invention.
A frontier refers to an area of land that is unexplored or has not been incorporated into a political entity, whereas a boundary is a political invention that demarcates the limits of a political entity.
Frontiers are often characterized by a lack of established governance structures, and they can be highly contested, with various groups vying for control or influence over the area.
Boundaries, on the other hand, are the result of political negotiations and agreements between different entities, and they are typically established through legal and diplomatic processes.
While boundaries may have physical markers, such as walls or fences, they are fundamentally social constructs that reflect the agreements and relationships between different political actors.
Thus, while frontiers and boundaries can be closely connected, they are fundamentally distinct concepts with different social and political implications.
To know more about frontier refer here:
https://brainly.com/question/13477618#
#SPJ11
when you see rock layers that are tilted from horizontal, what is the natural conclusion you can draw?
When rock layers are tilted from horizontal, it can indicate that some kind of geological disturbance or tectonic activity has occurred in the past.
The obvious conclusion is that the rocks were originally horizontally deposited but were later tilted or folded by geological events such as tectonic plate movements, earthquakes, or volcanic activity.
The type and intensity of the geological event that generated the deformation can be determined by the degree and direction of the tilt or folding. Gentle, homogeneous tilting, for example, may imply moderate, progressive uplift or subsidence, but abrupt, angular folds may indicate violent deformation driven by powerful compressional forces.
For such more question on rock layers:
https://brainly.com/question/29910345
#SPJ11
how do the distances between the terrestrial planets compare to the distance between the gas giants
Answer:The distances between the terrestrial planets (Mercury, Venus, Earth, and Mars) are much smaller than the distances between the gas giants (Jupiter, Saturn, Uranus, and Neptune).
The average distance between the terrestrial planets is relatively small, ranging from about 36 million miles (58 million kilometers) between Venus and Earth to about 142 million miles (228 million kilometers) between Mars and Jupiter (where the asteroid belt is located). In contrast, the average distance between the gas giants ranges from about 365 million miles (590 million kilometers) between Jupiter and Saturn to about 1.8 billion miles (2.9 billion kilometers) between Neptune and Pluto (which is now classified as a dwarf planet).
Therefore, the distances between the terrestrial planets are much smaller than the distances between the gas giants.
Explanation:
what benefits does the ocean provide us? how does the ocean influence the other 30% of the planet? what would earth be like without any oceans?
The ocean provides numerous benefits to us, including regulating the climate, producing oxygen, and providing food and medicine. It also plays a crucial role in the water cycle and absorbs carbon dioxide, helping to mitigate the effects of climate change.
The ocean influences the other 30% of the planet through ocean currents, which affect the distribution of heat and nutrients, and by supporting diverse marine ecosystems, which in turn support life on land. Without any oceans, the earth would be vastly different.
The climate would be more extreme, with temperatures fluctuating wildly between day and night. Land-based life would struggle to survive without the regulation of the water cycle and the provision of oxygen by marine plants.
The absence of the ocean's absorbing capacity would lead to an increase in atmospheric carbon dioxide, exacerbating climate change. Overall, the ocean plays a critical role in maintaining the balance and health of our planet.
To know more about ocean refer here:
https://brainly.com/question/8842961#
#SPJ11
What happens when a house is on uncompacted loose sediment during an earthquake?
Areas where the buildings are built on top of a deep layer of loose sediments are widely recognized as being more prone to earthquake damage... Yes.
To be clear, this is not the same the same thing as saying that loose soils actually "amplify" seismic waves. If anything, both P waves and S waves are attenuated by unconsolidated materials.
Explain how the fluidity and microstructure of a cast made by lost foam process can be different
from those in a conventional sand casting process.
The fluidity and microstructure of a cast made by lost foam process can be different depending on several factors. The fluidity of the cast can be affected by the design of the mold, the type of foam used for the pattern, and the characteristics of the molten metal.
The mold design can impact the flow of the metal, with more complex molds requiring greater fluidity to fill all the cavities. The type of foam used for the pattern can affect the porosity and permeability of the mold, which can impact how well the metal can flow through the mold. Lastly, the characteristics of the molten metal, such as temperature and composition, can also affect the fluidity of the cast.
The microstructure of the cast can be influenced by the cooling rate and solidification behavior of the molten metal. The cooling rate can determine the size and distribution of the solidification grains, which can in turn impact the mechanical properties of the cast.
The cooling rate is influenced by how fast the mold dissipates heat from the molten metal, which can be affected by factors such as the thickness of the walls and the type of material used to make the mold.
To know more about permeability
brainly.com/question/22370062
#SPJ4
after several days of steady rain, the sediment becomes saturated with water and its strength is reduced by 25%. what are the likely implications for
After several days of steady rain, the sediment becomes saturated with water and its strength is reduced by 25%. implications are saturation can lead to landslides, soil erosion, flooding, compaction, and reduced soil aeration, all of which have potential negative impacts on the environment, infrastructure, and agriculture.
1. Increased risk of landslides: As the sediment strength decreases, the slope stability is compromised, making it more prone to landslides and soil movement, especially in hilly or mountainous areas.
2. Soil erosion: The weakened soil structure makes it more susceptible to erosion by water, leading to loss of fertile topsoil and potential damage to vegetation and agricultural land.
3. Flooding: Saturated sediments cannot absorb any more water, leading to excess surface runoff and potential flash floods in low-lying areas.
4. Compaction and subsidence: The increased water content in the sediment may cause soil compaction and subsidence, affecting building foundations and infrastructure.
5. Reduced soil aeration: Saturated soils can lead to reduced soil aeration, which impacts the availability of oxygen for plant roots and microbial activity, thus affecting overall soil health and plant growth.
To know more about soil aeration refer here:
https://brainly.com/question/6872228#
#SPJ11
in terms of preferred source water, surface waters are highest quality and require less treatment, and as such are preferred over groundwater. true false
Water that is found underground in saturated regions beneath the surface of the earth is known as groundwater. The water table is the term for the saturated zone's upper surface. Contrary to popular perception, underground rivers are not created by groundwater.
Water that is found in soil, rock, and rock formation fissures below the surface of the Earth is known as groundwater. Groundwater makes up around 30% of all the freshwater that is readily available worldwide. When it can produce a sufficient amount of water, a unit of rock or an unconsolidated deposit is referred to be an aquifer.
The term "groundwater" refers to precipitation that has seeped into the soil below the surface and accumulated in voids underground. Aquifers can be divided into two categories: confined and unconfined.
Learn more about Groundwater here:
https://brainly.com/question/14241380
#SPJ4
which of the following control the milankovitch cycles that influence global climate? multiple select question. precession (the wobble of earth's rotational axis) eccentricity (the varying shape of earth's orbit) varying gas compositions in earth's atmosphere varying tilt angles of earth changes in the speed of revolution of earth
The Milankovitch cycles are a set of periodic changes in Earth's climate that are caused by variations in its orbit around the sun. There are several factors that influence these cycles, including precession, eccentricity, varying gas compositions in Earth's atmosphere, varying tilt angles of Earth, and changes in the speed of revolution of Earth.
Precession refers to the wobbling motion of Earth's rotational axis, which affects the timing of the seasons. Eccentricity describes the varying shape of Earth's orbit around the sun, which affects the amount of solar radiation received at different times of the year.
Varying gas compositions in Earth's atmosphere, such as greenhouse gases like carbon dioxide, can affect the amount of heat trapped in the atmosphere. Varying tilt angles of Earth also play a role in the Milankovitch cycles, affecting the distribution of solar radiation across the planet.
Finally, changes in the speed of revolution of Earth can impact the timing and intensity of the Milankovitch cycles.
To know more about Milankovitch cycles refer here:
https://brainly.com/question/29410921#
#SPJ11
If you were traveling to the island of Mauritius, which climate would you need to be most prepared for? Use the buttons to zoom in and out as necessary.
A) tropical wet
B) tropical and subtropical steppe
C) tropical monsoon
D) tropical savanna
E) marine west coast, with dry season
If you were traveling to the island of Mauritius, the climate you would need to be most prepared for is C) tropical monsoon.
Mauritius has a tropical monsoon with warm temperatures year-round, but the monsoon season brings heavy rainfall and the possibility of tropical storms. It is important to pack appropriate rain gear and be aware of potential weather disruptions. When the Intertropical Convergence Zone (ITCZ) moves away from the area, the tropical monsoon climate enters its dry season.
The ITCZ is a low-pressure region close to the equator where the trade winds from the Northern and Southern Hemisphere converge, to further explain this. In tropical monsoon regions, this convergence forces air to ascend, resulting in cloud formation and precipitation, which ushers in the wet season.
The tilt of the Earth's axis and the uneven distribution of solar radiation across the planet's surface cause the ITCZ to shift north and south at various periods of the year. A region has a rainy season with heavy rainfall while the ITCZ is located over that area.
Learn more about Intertropical Convergence Zone here
https://brainly.com/question/31388072
#SPJ11
True or False: The solar elevation at the Tropic of Capricorn on the spring and fall equinoxes will be the same.A. TrueB. False
The statement "The solar elevation at the Tropic of Capricorn on the spring and fall equinoxes will be the same" is false.
The Tropic of Capricorn is located at 23.5 degrees south of the equator and is the southernmost point where the sun can be directly overhead. During the spring equinox, the sun is directly over the equator, and as a result, the Tropic of Capricorn experiences a solar elevation of zero degrees.
However, during the fall equinox, the sun is directly over the Tropic of Capricorn, which means that the solar elevation at this location is at its maximum.
Therefore, the solar elevation at the Tropic of Capricorn on the spring and fall equinoxes is not the same. It is important to note that the solar elevation at any location changes throughout the year as the Earth revolves around the sun and the tilt of its axis changes.
To know more about Tropic of Capricorn refer here:
https://brainly.com/question/14119275#
#SPJ11
Earth is farthest from the Sun in July and closest to the Sun in January. During which Northern Hemisphere season is Earth moving fastest in its orbit?
-Spring
-Summer
-Fall
-Winter
During Winter, Northern Hemisphere season is Earth moving fastest in its orbit.
Since the Northern Hemisphere faces the Sun, May, June, and July are the months when it receives the greatest direct sunshine. In November, December, and January, the same is true for the Southern Hemisphere. Because of the Earth's axial tilt, the Sun appears higher in the sky during the summer, which raises the solar flux. Thus, spring begins on March 1, summer on June 1, autumn on September 1, and winter on December 1 for temperate regions in the northern hemisphere.
The hottest months in the Southern Hemisphere are December, January, and February, whereas June, July, and August are the warmest months in the Northern Hemisphere due to a seasonal lag. In the temperate zone of the southern hemisphere, spring starts on September 1, summer on December 1, autumn on March 1, and winter on June 1.
Therefore, Option D is the correct answer.
Learn more about Hemisphere here:
https://brainly.com/question/25641436
#SPJ4
how do waves erode material from the shoreline? multiple select question. wearing away of bedrock with the crashing and grinding of water and sediment smashing together loose pieces of rock and making large, angular rocks become smaller, rounded ones breaking directly on a rocky coast and swirling away loose pieces of bedrock by being strongest in bays, where more sediment is available for transportation
Waves are powerful forces that constantly shape the shoreline. They can erode material in a few different ways. Firstly, the constant crashing of waves against the shoreline can wear away bedrock over time.
The impact of the water and sediment particles smashing together can slowly grind down the rock until it becomes smooth and rounded.
Secondly, waves can break directly onto a rocky coast and swirl away loose pieces of bedrock. This can create large gaps and caves in the rock formation.
Finally, waves are often strongest in bays, where there is more sediment available for transportation. This sediment can be carried away by the waves, slowly eroding the shoreline over time. In all of these cases, waves are using their force to remove material from the shoreline and shape it into new formations.
To know more about shoreline refer here:
https://brainly.com/question/13572708#
#SPJ11
changes in sea level may be caused by which of the following? multiple select question. rates of seafloor spreading position of the continents earth's magnetic polarity amount of continental glaciation ocean temperatures
Changes in sea level can be caused by multiple factors, including the rates of seafloor spreading, the amount of continental glaciation, and ocean temperatures. However, the spreading position of the continents and the Earth's magnetic polarity are not significant factors in causing changes in sea level. Therefore, options A, D, and E are correct.
As the seafloor spreads at mid-ocean ridges, it pushes the continents apart, causing ocean basins to widen and sea level to rise. Similarly, an increase in the amount of continental ice can lead to a drop in sea level due to the storage of water in glaciers. Conversely, melting glaciers and ice caps can cause sea level to rise.
Ocean temperatures also play a significant role in causing changes in sea level. As the temperature of the ocean water increases, it expands, leading to a rise in sea level. Moreover, warming oceans also contribute to melting of ice sheets and glaciers, further contributing to sea level rise.
Learn more about seafloor spreading here:
https://brainly.com/question/870586
#SPJ4
