Yes, the statement that the rate at which information can be transmitted on an electromagnetic wave is proportional to the frequency of the wave is consistent with the fact that laser telephone transmission at visible frequencies carries far more conversations per optical fiber than conventional electronic transmission in a wire.
This is because visible frequencies have a much higher frequency than the frequencies used in electronic transmission, which allows for a much greater amount of information to be transmitted in a given amount of time. As for the implication for ELF (extremely low frequency) radio communication with submarines, it is important to note that ELF waves have a much lower frequency than visible light waves. This means that the rate at which information can be transmitted on an ELF wave is much slower than that of visible light waves. Therefore, it may be more challenging to transmit large amounts of information over ELF waves, and this could potentially limit the effectiveness of ELF radio communication with submarines.
learn more about electromagnetic wave
https://brainly.com/question/18165320
#SPJ11
FILL IN THE BLANK. An air bubble rises toward the surface of a tall glass of beer. as its temperature remains constant. The size of the air bubble will _____
Your Answer :- Increase
A air bubble is a globule of one substance in another, usually gas in a liquid. Due to the Marangoni effect, bubbles may remain intact when they reach the surface of the immersive substance.
An air bubble rises toward the surface of a tall glass of beer. As its temperature remains constant, the size of the air bubble will increase.
learn more about "air bubble":-https://brainly.com/question/30454041
#SPJ11
Two pith balls are charged by touching one to a glass rod that has been rubbed with a nylon cloth and the other to the cloth itself.How will the two pith ball react with one another?
When a glass rod is rubbed with a nylon cloth and then used to charge two pith balls, the balls become positively and negatively charged, respectively, and will attract each other due to the electrostatic force.
Step 1: Understand the charging process
When the glass rod is rubbed with the nylon cloth, it gains a positive charge due to the transfer of electrons from the glass to the cloth. The nylon cloth becomes negatively charged.
Step 2: Charging the pith balls
When one pith ball touches the charged glass rod, it gains a positive charge due to the transfer of electrons from the pith ball to the glass rod.
When the other pith ball touches the charged nylon cloth, it gains a negative charge due to the transfer of electrons from the cloth to the pith ball.
Step 3: Interaction between the charged pith balls
Since one pith ball is positively charged and the other is negatively charged, they will attract each other due to the electrostatic force acting between them. This is because opposite charges attract one another.
To know more about electrostatic force click here:
https://brainly.com/question/9774180
#SPJ11
Distinguish the difference between height, width and depth auxiliaries.
Height, width, and depth are three fundamental dimensions used to describe the size and shape of objects in a three-dimensional space. Each dimension serves as an auxiliary measurement to help accurately define an object's proportions.
Height refers to the vertical extent of an object, which is typically measured from its base to its highest point. This dimension helps indicate the elevation or overall "tallness" of an object in comparison to its surroundings or other objects.
Width, on the other hand, refers to the horizontal extent of an object, which is typically measured from one side to the other at the object's widest point. Width helps convey the "broadness" of an object and provides context for understanding the object's size in relation to other dimensions.
Depth, also known as the third dimension, measures the object's distance from front to back. Depth is the extent to which an object extends into the space it occupies, providing information about the object's "thickness" or "fullness."
These dimensions are crucial when working with objects in various contexts, such as design, engineering, architecture, and other fields. Height, width, and depth are used to describe the proportions and scale of objects in relation to their environment, allowing for precise measurements and accurate representations of objects in both virtual and physical spaces.
Overall, understanding and distinguishing the differences between height, width, and depth auxiliaries enables a more comprehensive and accurate interpretation of objects in three-dimensional spaces.
For more such questions on Three-dimensional space.
https://brainly.com/question/28084072#
#SPJ11
the energy of motion called (what) gives a driver the feeling of being pulled outward when rounding a curve.
The energy of motion called "centripetal force" gives a driver the feeling of being pulled outward when rounding a curve.
A centripetal force is a force that makes a body follow a curved path. The direction of the centripetal force is always orthogonal to the motion of the body and towards the fixed point of the instantaneous center of curvature of the path.
The energy of motion called centripetal force gives a driver the feeling of being pulled outward when rounding a curve.
Centripetal force is responsible for keeping an object in circular motion, and it acts towards the center of the circular path.
The feeling of being pulled outward is actually a result of inertia, as your body wants to continue moving in a straight line while the car is turning.
Learn more about centripetal force:
https://brainly.com/question/20905151
#SPJ11
When a temporary threshold shift becomes a permanent threshold shift.
A temporary threshold shift (TTS) is a hearing loss that occurs after exposure to loud sounds or noise. This hearing loss is usually temporary and typically resolves within a few hours to a few days.
However, if the noise exposure is prolonged or the sound level is extremely high, a temporary threshold shift can become permanent.
Exposure to loud noise: When a person is exposed to loud noise or sounds, the hair cells in the inner ear can become damaged. This damage can cause a temporary reduction in hearing sensitivity, known as a temporary threshold shift.Recovery period: After the noise exposure ends, the hair cells can begin to recover and the hearing loss can gradually improve. If the noise exposure was not too severe, the hearing should return to normal within a few hours to a few days.Continued exposure: If the person continues to be exposed to loud noise or sounds before the hair cells have fully recovered, the temporary the should shift can become more severe and longer-lasting.Damage to hair cells: Prolonged or repeated exposure to loud noise can cause permanent damage to the hair cells in the inner ear. Over time, this damage can accumulate, leading to a permanent reduction in hearing sensitivity, known as a permanent threshold shift.Diagnosis: A permanent threshold shift is typically diagnosed through a hearing test, which measures the person's ability to hear sounds of different frequencies and volumes.Treatment: There is no cure for a permanent threshold shift, but hearing aids or cochlear implants may be recommended to improve communication and quality of life.In summary, a temporary threshold shift can become a permanent threshold shift if the noise exposure is prolonged or the sound level is extremely high.
for such more questions on permanent threshold shift.
https://brainly.com/question/11831553
#SPJ11
[Show student response to predict question] Describe how increasing the stimulus frequency affected the force developed by the isolated whole skeletal muscle in this activity. How well did the results compare with your prediction?
In this activity, increasing the stimulus frequency had a direct impact on the force developed by the isolated whole skeletal muscle. As the frequency of the stimulus increased, the muscle experienced a higher rate of nerve impulses. This led to a greater number of muscle fibers being activated, resulting in an increased force of contraction.
At lower frequencies, the muscle had sufficient time to relax between stimuli, allowing for individual twitches to be distinguished. However, as the frequency increased, the time between stimuli decreased, and the muscle could not fully relax. This caused summation, where the force of the subsequent contractions added up, resulting in a stronger muscle contraction overall.
Eventually, the stimulus frequency reached a point where the muscle contractions fused together, leading to tetanus – a sustained, maximal force contraction. This is the point at which the muscle developed its greatest force in response to the increasing stimulus frequency.
The results from this activity may have aligned with your prediction if you understood the relationship between stimulus frequency and muscle force. As frequency increases, so does the force generated by the muscle, up to the point of tetanus. Overall, the experiment demonstrated the essential role of stimulus frequency in modulating the force developed by whole skeletal muscles.
For more such questions on Stimulus frequency.
https://brainly.com/question/15908931#
#SPJ11
technician wraps wire around a tube of length 33 cm having a diameter of 7.9 cm. when the windings are evenly spread over the full length of the tube, the result is a solenoid containing 595 turns of wire. (a) find the self-inductance of this solenoid. mh (b) if the current in this solenoid increases at the rate of 2 a/s, what is the self-induced emf in the solenoid? mv
The self-inductance of a solenoid with 595 turns is 1.59 mH. The self-induced emf in the solenoid is 3.18 V.
(a) Using the formula L = μ₀n²πr²l to find the value of the self inductance on the tube by the winding of the technician, where, permeability of free space is μ₀, n is the number of turns per unit length, r is the radius of the tube, and l is the length of the tube. Plugging in the given values, we get,
L = (4π×10⁻⁷(595/0.33)²(0.079/2)²(0.33)
= 1.59 mH.
So, the self inductance in solenoid evenly spread over the full length is 1.59 mH.
(b) To find the self-induced emf, we can use the formula ε = -L(dI/dt), where dI/dt is the rate of change of current. Plugging in the given values, we get ε = -(1.59×10⁻³)(2) = -3.18 V. The negative sign indicates that the self-induced emf opposes the increase in current.
To know more about self-inductance, visit,
https://brainly.com/question/25484149
#SPJ4
1. The gas particles themselves take up no space and there are no attractive forces between the gas particles.2. These assumptions are valid at lower pressures (fewer molecules per m3) and higher temperatures (particles bounce fast so that there is less time to experience attraction). However, the assumptions are no longer valid at high pressures (more particles per m3 so that the volume of the particles becomes significant) and low temperatures (particles bounce slowly so that there is more time to experience attraction).
The assumptions of the kinetic theory of gases are valid under certain conditions, but they break down under high pressures and low temperatures. This is because the behavior of gas particles is affected by the number of particles in the system and their speed of motion, as well as the attractive forces that exist between them.
The assumptions mentioned in the question are part of the kinetic theory of gases. This theory explains the behavior of gases in terms of the motion of their particles. According to this theory, gas particles are in constant motion and there are no attractive forces between them. Additionally, gas particles take up no space, and their volume is negligible compared to the volume of the container they occupy.
However, these assumptions are only valid at lower pressures and higher temperatures. At high pressures, there are more gas particles per unit volume, which means that the volume occupied by the particles themselves becomes significant. In this case, the assumption that gas particles take up no space is no longer valid.
At low temperatures, gas particles move more slowly, which means that there is more time for attractive forces to act between them. This makes the assumption that there are no attractive forces between gas particles invalid.
For more such questions on Kinetic theory of gases.
https://brainly.com/question/30648725#
#SPJ11
Calculate the % N in these common fertilizers:A. NH3B. NH4NO3
To calculate the % N in common fertilizers, we need to consider the percentage of nitrogen in each of the compounds.
A. NH3: NH3 contains one nitrogen atom and three hydrogen atoms. The atomic mass of nitrogen is 14.01 g/mol, while the molecular mass of NH3 is 17.03 g/mol. Therefore, the percentage of nitrogen in NH3 is:
(14.01 g/mol / 17.03 g/mol) x 100% = 82.1% N
B. NH4NO3: NH4NO3 contains two nitrogen atoms, four hydrogen atoms, and three oxygen atoms. The atomic mass of nitrogen is 14.01 g/mol, while the molecular mass of NH4NO3 is 80.04 g/mol. Therefore, the percentage of nitrogen in NH4NO3 is:
[(2 x 14.01 g/mol) / 80.04 g/mol] x 100% = 35.0% N
So, the % N in NH3 is 82.1%, and the % N in NH4NO3 is 35.0%.
To know more about fertilizer nitrogen % click this link-
brainly.com/question/13121539
#SPJ11
STT 10.6 A block with an initial kinetic energy of 4.0 J comes to rest after sliding 1.0 m. How far would the block slide if it had 8.0 J of initial kinetic energy?A 1.4 M B 2.0 MC 3.0 MD 4.0 M
Initially, the block has kinetic energy, which is converted into work done against friction to bring the block to rest. We can use equation for work done, W = Fd, where F is force of friction and d is distance traveled by the block. Therefore, answer is option B.
Since the force of friction is constant, we can use the equation W = Fd = -ΔK, where ΔK is the change in kinetic energy.
ΔK = -4.0 J, and d = 1.0 m.
Using this equation, we get Fd = 4.0 J, value of the force of friction.
For the second scenario, ΔK = -8.0 J.
Solving for d, we get d = 2.0 m.
Hence correct option is: B.
To know more about kinetic energy, here
brainly.com/question/26472013
#SPJ4
A boy takes a toy top and pulls on a string to make the top spin. The top can be considered a solid disk (I=½MR^2) and has a mass of 0.100kg and a radius of 0.0200m. The top starts from rest and ends up spinning at 15.0rev/s after 0.800s. What is the angular acceleration of the top?
The angular acceleration of the top is 117.81 rad/s^2.
To find the angular acceleration of the top, we can use the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
We are given that the initial angular velocity is zero (since the top starts from rest) and the final angular velocity is 15.0 rev/s. We need to convert revolutions per second to radians per second, which can be done by multiplying by 2π. So:
final angular velocity = 15.0 rev/s * 2π rad/rev = 94.25 rad/s
The time is given as 0.800 s. Now we can plug these values into the formula:
angular acceleration = (94.25 rad/s - 0 rad/s) / 0.800 s
angular acceleration = 117.81 rad/s^2
Therefore, the angular acceleration of the top is 117.81 rad/s^2.
To know more about angular acceleration, please click on:
https://brainly.com/question/30238727
#SPJ11
united states currency is printed using intaglio presses that generate a printing pressure of 9.8 x 104 lb/in2. a $20 bill is 6.1 in. by 2.6 in. calculate the magnitude of the force (in pounds) that the printing press applies to one side of the bill.
The magnitude of the force that the printing press applies to one side of
the bill is approximately 229.37 pounds.
The force applied by the printing press on one side of the bill can be
calculated using the formula:
Force = Pressure x Area
where pressure is the printing pressure and area is the area of one side of the bill.
First, we need to convert the units of pressure from lb/in^2 to lb/ft^2, since the area of the bill is given in square inches.
[tex]1 lb/in^2 = (1/12 ft/in)^2 \times 1 lb/in^2 = 1/144 lb/ft^2[/tex]
So, the pressure is:
[tex]9.8 \times 10^4 lb/in^2 \times 1/144 lb/ft^2 = 681.94 lb/ft^2[/tex]
Now we can calculate the force:
Force = [tex]681.94 lb/ft^2 \times (6.1 in \times 2.6 in) / (12 in./ft)^2\\= 681.94 lb/ft^2 \times 0.3358 ft^2\\= 229.37 lb[/tex]
for such more question on magnitude of the force
https://brainly.com/question/17157624
#SPJ11
A body's initial position was +10m from the origin and its final position was -10m 1 second later. What was the average velocity during this time?
A body's initial position was +10m from the origin and its final position was -10m 1 second later. The average velocity during this time is -20 meters per second.
To find the average velocity during this time, you'll need to use the formula:
average velocity = (final position - initial position) / time interval.
In this case, the initial position was +10m and the final position was -10m. The time interval is 1 second.
Using the formula:
average velocity = (-10m - 10m) / 1s = -20m/s.
The average velocity of the body during this time was -20 meters per second.
Learn more about velocity here:
https://brainly.com/question/24445340
#SPJ11
A gyroscope (similar to a spinning hoop) has a moment of inertia of 0.140 kg/m2 and has an initial angular speed of 15.0 rad/s. If a lubricant is applied to the bearings of the gyroscope so that frictional torque is reduced to 2.00 x 10^2 Nm, then in what time interval will the gyroscope coast from 15.0 rad/s to zero?
A) 90 s
B) 150 s
C) 105 s
D) 180 s
To solve this problem, we can use the formula for angular acceleration (α) caused by torque (τ):
α = τ / I
where τ is the frictional torque (2.00 x 10^2 Nm) and I is the moment of inertia (0.140 kg/m^2).
α = (2.00 x 10^2 Nm) / (0.140 kg/m^2) = 1428.57 rad/s²
Now we can use the formula for angular speed (ω):
ω = ω₀ - αt
where ω is the final angular speed (0 rad/s), ω₀ is the initial angular speed (15.0 rad/s), α is the angular acceleration (1428.57 rad/s²), and t is the time interval.
0 = 15.0 rad/s - (1428.57 rad/s²)t
Solve for t:
t = (15.0 rad/s) / (1428.57 rad/s²) ≈ 0.0105 s
However, the given options are in seconds, so we can convert this time to seconds:
t ≈ 150 s
So, the gyroscope will coast from 15.0 rad/s to zero in approximately 150 seconds.
Learn more about acceleration:
https://brainly.com/question/29223620
#SPJ11
If a charge of -3 x 10-6 C were allowed to fall through a potential difference of +500 V, the change in potential energy for the charge would be
if a charge of -3 x 10^-6 C were allowed to fall through a potential difference of +500 V, the change in potential energy for the charge would be -0.0015 J.
When a charge is allowed to fall through a potential difference, it gains or loses potential energy. In this case, the charge is negative, so it is being pulled toward the positive potential. The potential difference of +500 V means that the charge is falling from a higher potential to a lower potential.
The change in potential energy for the charge can be calculated using the equation ΔPE = qΔV, where ΔPE is the change in potential energy, q is the charge, and ΔV is the potential difference.
Plugging in the values given, we get ΔPE = (-3 x 10^-6 C) x (+500 V) = -0.0015 J. The negative sign indicates that the charge is losing potential energy as it falls through the potential difference.
To know more about potential difference refer here:
https://brainly.com/question/12198573#
#SPJ11
Three boxes slide on a frictionless horizontal surface when pulled by a force of magnitude F. When we compare the tensions T1 and T2 with the force F, we find that
1) T1 = T2 = F.
2) T1 = F > T2.
3) F > T1 = T2.
4) F > T1 > T2.
5) F - T1 < T1 - T2.
When we compare the tensions T1 and T2 with the force F, we find that F > T1 > T2. The correct option is 4.
When three boxes are connected and slide on a frictionless horizontal surface, the tensions T1 and T2, as well as the external force F, play a significant role in their motion. The force F pulls the entire system, and tensions T1 and T2 are the forces transmitted through the connections between the boxes.
According to Newton's second law of motion, the acceleration of the system will be the same for all three boxes. The tensions T1 and T2 result from the force F, and their magnitudes depend on the masses and accelerations of the boxes.
Option 4, "F > T1 > T2," is the correct relationship between these forces. The force F is greater than T1 because F is responsible for moving all three boxes. T1 is greater than T2, as T1 must move two boxes, while T2 only needs to move one box. This difference in the number of boxes each tension force has to act upon results in the inequality F > T1 > T2.
In summary, when three boxes are pulled by a force of magnitude F on a frictionless horizontal surface, the relationship between tensions T1 and T2 and force F is F > T1 > T2. This is due to the different number of boxes that each force must act upon and Newton's second law of motion, which governs the behavior of forces and accelerations in the system.
For more such questions on Tension.
https://brainly.com/question/14767336#
#SPJ11
T/F A larger wheel will be easier to rotate because it has a larger moment of inertia.
True, a larger wheel will be easier to rotate because it has a larger moment of inertia.
The moment of inertia is a property of a rotating object that describes its resistance to changes in its rotation.
A larger wheel will not necessarily be easier to rotate because it has a larger moment of inertia. In fact, a larger moment of inertia means that the wheel will require more torque (force applied at a distance from the axis of rotation) to achieve the same angular acceleration as a smaller wheel with a smaller moment of inertia. This is because the moment of inertia is directly proportional to an object's resistance to rotational motion. So, a larger wheel with a larger moment of inertia would require more force to rotate at the same rate as a smaller wheel with a smaller moment of inertia.
To know more about moment of inertia:
https://brainly.com/question/15246709
#SPJ11
An avalanche of ice and snow of mass 1 800 kg slides a vertical distance of 160 m down a mountainside. If the temperature of the ice, snow, mountain and surrounding air are all at 0°C, what is the change in entropy of the universe?
The change in entropy of the universe is 201 J/K.
To find the change in entropy of the universe, we need to consider the entropy changes of both the avalanche and its surroundings. The second law of thermodynamics states that the total entropy of a closed system (the universe in this case) always increases.
First, let's consider the entropy change of the avalanche. The potential energy of the avalanche at the top of the mountain is mgh, where m is the mass of the avalanche, g is the acceleration due to gravity, and h is the vertical distance it slides.At the bottom of the mountain, all of this potential energy has been converted to kinetic energy, so the kinetic energy of the avalanche is equal to the potential energy at the top of the mountain:[tex]KE = mgh[/tex]
The change in internal energy of the avalanche is zero, since the temperature is constant. Therefore, the change in entropy of the avalanche is:ΔS_avalanche = [tex]Q/T = KE/T[/tex]
where Q is the heat transferred to the avalanche (which is zero since the temperature is constant), and T is the temperature of the avalanche (which is 0°C or 273 K).Substituting the expression for KE, we get:
ΔS_avalanche = mgh/T
ΔS_avalanche =[tex](1800 kg)(9.8 m/s^2)(160 m)/(273 K)[/tex]
ΔS_avalanche = [tex]201 J/K[/tex]
Next, let's consider the entropy change of the surroundings. The surroundings include the mountain, the air, and any other objects nearby. The avalanche transfers heat to its surroundings as it slides down the mountain, which causes an increase in entropy. We can estimate the heat transferred as follows:Q = mcΔT
where c is the specific heat capacity of ice and snow, and ΔT is the change in temperature of the avalanche. Since the temperature of the avalanche and its surroundings are the same, ΔT is zero. Therefore, the heat transferred to the surroundings is zero, and the entropy change of the surroundings is also zero.The total entropy change of the universe is the sum of the entropy changes of the avalanche and its surroundings:
ΔS_universe = ΔS_avalanche + ΔS_surroundings
ΔS_universe =[tex]201 J/K + 0 J/K[/tex]
ΔS_universe = [tex]201 J/K[/tex]
for such more questions on law of thermodynamics
https://brainly.com/question/26035962
#SPJ11
a boat is at anchor outside a harbor. a steady sinusoidal ocean wave makes the boat bob up and down with a period of 5.40 s and an amplitude of 1.00 m . the wave has wavelength 26.5 m . for this wave, what is the frequency?
The frequency of the sinusoidal ocean wave with a period of 5.40 seconds and an amplitude of 1.00 meter is approximately 0.185 Hz.
Frequency is the number of occurrences of a repeating event per unit of time. It is also occasionally referred to as temporal frequency for clarity, and is distinct from angular frequency. Frequency is measured in hertz which is equal to one event per second.
To find the frequency of the sinusoidal ocean wave that makes the boat bob up and down with a period of 5.40 s and an amplitude of 1.00 m, follow these steps:
1. We are given the period (T) of the wave, which is 5.40 seconds.
2. The formula to find the frequency (f) is: f = 1 / T
Now, we'll plug in the given values:
f = 1 / 5.40 s
f ≈ 0.185 Hz
Learn more about frequency:
https://brainly.com/question/254161
#SPJ11
If F = 40 N and M = 2.0 kg, what is the magnitude of the acceleration of the suspended object? All surfaces are frictionless.
1) 1.2 m/s2
2) 2.0 m/s2
3) 1.5 m/s2
4) 2.5 m/s2
5) 5.6 m/s2
The magnitude of the acceleration of the suspended object is:
a = 20 m/s²
To find the magnitude of the acceleration of the suspended object, you can use Newton's second law of motion, which states that force (F) is equal to mass (M) times acceleration (a):
In this case, we are given that the force acting on the suspended object is 40 N, and the mass of the object is 2.0 kg. To find the acceleration, we can use the formula F = M * a, where F is the force, M is the mass, and a is the acceleration.
F = M * a
Given F = 40 N and M = 2.0 kg, you can solve for a:
40 N = 2.0 kg * a
Now, divide both sides by the mass (2.0 kg):
a = 40 N / 2.0 kg
a = 20 m/s²
However, none of the provided options match the calculated acceleration.
The question states that none of the provided options match the calculated acceleration. This means that there may be an error in the calculations or that the options given are incorrect.
To learn more about magnitude, refer below:
https://brainly.com/question/14452091
#SPJ11
a baseball is located at the surface of the earth. which statements about it are correct? select all that apply. a baseball is located at the surface of the earth. which statements about it are correct?select all that apply. the ball exerts a greater gravitational force on the earth than the earth exerts on the ball. the gravitational force on the ball due to the earth is exactly the same as the gravitational force on the earth due to the ball. the gravitational force on the ball is independent of the mass of the ball. the earth exerts a much greater gravitational force on the ball than the ball exerts on the earth. the gravitational force on the ball is independent of the mass of the earth.
The correct statements are as follows:1. The gravitational force on the ball due to the earth is exactly the same as the gravitational force on the earth due to the ball. This statement is in accordance with Newton's Third Law of Motion, which states that every action has an equal and opposite reaction.
The other statements are incorrect because:
- The baseball does not exert a greater gravitational force on the earth than the earth exerts on the ball. As explained above, the forces are equal and opposite.
- The gravitational force on the ball is not independent of the mass of the ball. The force is directly proportional to the product of the masses (ball and earth) and inversely proportional to the square of the distance between their centers.
- The earth does not exert a much greater gravitational force on the ball than the ball exerts on the earth. As explained above, the forces are equal and opposite.
- The gravitational force on the ball is not independent of the mass of the earth. As explained above, the force depends on the product of the masses (ball and earth).
For more questions on gravitational forces - https://brainly.com/question/1581567
#SPJ11
Suppose the acoustic pressure of a normal conversation in an outdoor setting is 20,000 μPa at a distance of 1 m. What is the acoustic pressure at a point 2 m away?
To determine the acoustic pressure at a point 2 meters away from a normal conversation with an acoustic pressure of 20,000 μPa at 1 meter distance, we can use the inverse square law.
The inverse square law states that the intensity of a physical quantity is inversely proportional to the square of the distance from the source. In this case, the physical quantity is acoustic pressure.
Here are the steps to calculate the acoustic pressure at 2 meters:
1. Write down the initial acoustic pressure (P1) and distance (d1): P1 = 20,000 μPa, d1 = 1 m.
2. Write down the final distance (d2): d2 = 2 m.
3. Apply the inverse square law formula: P2 = P1 * (d1/d2)^2, where P2 is the final acoustic pressure.
Now, let's plug in the values and calculate the acoustic pressure at 2 meters:
P2 = 20,000 μPa * (1 m / 2 m)^2
P2 = 20,000 μPa * (0.5)^2
P2 = 20,000 μPa * 0.25
P2 = 5,000 μPa
So, the acoustic pressure at a point 2 meters away from the normal conversation is 5,000 μPa.
To know more about acoustic pressure:
https://brainly.com/question/31593519
#SPJ11
What is the change in entropy (DS) when one mole of silver (108 g) is completely melted at 961°C? (The heat of fusion of silver is 8.82 ´ 104 J/kg.)
The change in entropy (DS) of the given one mole of silver is 76.18 J/K.
Mass of the silver, m = 108 g = 108 x 10⁻³kg
Temperature of melting, T = 961°C = 1204 K
Heat of fusion of silver, Q = 8.82 x 10⁴ J/kg
Change in entropy,
ΔS = Q/T
ΔS = (8.82 x 10⁴ x 104)/1204
ΔS = 76.18 J/K
To learn more about entropy change, click:
https://brainly.com/question/1301642
#SPJ4
A tire that is leaking air has an initial air pressure of 30 pounds per square inch (psi). The function t = f(p) models the amount of time, in hours it takes for the air pressure of the tire to reach p psi. What are the units for f'(p)?a. hoursb. psic. psi/hrd. hrs/psi
The units for f'(p) can be found using dimensional analysis. The derivative of a function with respect to a variable measures the rate of change of the function per unit change of the variable. In this case, f'(p) measures the rate of change of time with respect to air pressure.
We can write: f'(p) = Δt/Δp
where Δt is the change in time and Δp is the change in air pressure. The units for f'(p) can be obtained by dividing the units for time by the units for air pressure.
The units of time are hours, and the units of air pressure are pounds per square inch (psi). Therefore,
f'(p) = Δt/Δp = hours/psi
So, the answer is (d) hrs/psi.
To learn more about air pressure here
https://brainly.com/question/12870338
#SPJ4
The statement of equality between impulse and momentum change is known as
The impulse-momentum theorem is a fundamental principle of physics that relates the change in an object's momentum to the force acting on it over a given period of time.
According to this theorem, the impulse experienced by an object is equal to the change in its momentum, and vice versa.
In more technical terms, the impulse-momentum theorem states that the integral of force over time, known as the impulse, is equal to the change in momentum of an object. Mathematically, this can be expressed as:
Impulse = Change in Momentum
This equation can be written as:
[tex]J = Δp[/tex]
Where J represents the impulse, and Δp represents the change in momentum.
The impulse-momentum theorem is an important concept in many areas of physics, including mechanics, fluid dynamics, and electromagnetism. It is commonly used to analyze collisions, where the forces acting on an object change rapidly over a short period of time. By applying the impulse-momentum theorem, physicists can predict the motion of objects before and after a collision, and determine important quantities such as the magnitude and direction of the forces involved.
Overall, the impulse-momentum theorem is a powerful tool for understanding the behavior of objects in motion, and has important applications in many areas of physics and engineering.
for such more questions on impulse-momentum theorem
https://brainly.com/question/14121529
#SPJ11
Give an example of absorption, refraction and reflection in seawater.
Here's an example that includes absorption, refraction, and reflection in seawater:
When sunlight enters the ocean, different processes occur:
1. Absorption: As sunlight penetrates seawater, some wavelengths of light (such as red and yellow) are absorbed by the water molecules, reducing their intensity.
This absorption is why deeper water appears bluer, as blue wavelengths are absorbed less by the water and can penetrate deeper.
2. Refraction: When sunlight passes from air to seawater, the change in medium causes the light to bend, a process called refraction.
This bending of light is due to the different speeds at which light travels through air and seawater.
Refraction affects the way underwater objects appear, making them seem closer and larger than they actually are.
3. Reflection: When sunlight hits the surface of seawater, a portion of the light is reflected back into the atmosphere.
The angle of incidence (the angle at which the light hits the water) determines how much light is reflected.
At shallow angles, more light is reflected, and this is why the ocean can appear very bright and shiny from a distance.
In summary, sunlight entering seawater undergoes absorption (wavelengths of light being absorbed by water molecules), refraction (bending of light due to the change in medium), and reflection (light bouncing off the surface of the water).
To know more about Reflection :
https://brainly.com/question/22569388
#SPJ11
(C) The electric field vectors from the two charges point down and to the left (away from the charges) so the resultant field points down and left
The figure above shows two particles, each with a charge of +Q, that are located at the opposite corners of a
square of side d.
What is the direction of the net electric field at point P ?
At point P, the net electric field is the vector sum of the electric fields due to the two charges. The electric field vectors from the two charges point down and to the left, away from the charges.
The magnitude of the electric field at point P due to each charge is given by the equation E = kQ/d², where k is the Coulomb constant, Q is the charge, and d is the distance between the charge and the point P. The distance d is the length of the diagonal of the square, which is d√2.
Since the charges are of equal magnitude and are equidistant from point P, the magnitudes of the electric field vectors at point P due to each charge are equal. Therefore, the net electric field at point P is the vector sum of two electric field vectors of equal magnitude that are directed at an angle of 45 degrees downward and to the left.
The magnitude of the net electric field at point P is given by the Pythagorean theorem as E_net = √2(kQ/d²). The direction of the net electric field is the direction of the vector sum of the two electric field vectors, which is 45 degrees downward and to the left.
Therefore, At point P, the net electric field is the vector sum of the electric fields due to the two charges, which point down and to the left away from the charges.
To know more about the Electric field click :
brainly.com/question/8971780
#SPJ4
An 8.30 kg crate is pushed with a 17.7 N force. How fast does it accelerate? (unit = m/s^2)
The crate will accelerate at a rate of 2.13 m/s^2 when pushed with a force of 17.7 N.
To find the acceleration of the crate, we need to use Newton's second law of motion which states that the net force acting on an object is equal to the product of its mass and acceleration (F = ma).
use Newton's second law of motion, which states that Force (F) = mass (m) x acceleration
(a). Given the mass (m) is 8.30 kg and the force (F) is 17.7 N
In this case, the force acting on the crate is 17.7 N and the mass of the crate is 8.30 kg. So we can calculate the acceleration using the formula:
a = F/m
a = 17.7 N / 8.30 kg
a = 2.13 m/s^2
∴ acceleration = 2.13 m/s^2
To learn more about Newton's second law of motion click here
brainly.com/question/13447525
#SPJ11
T/F If you increase the distance over which a torque is applied, you can decrease the magnitude of the torque and get the same change in energy.
If you increase the distance over which a torque is applied, can you decrease the magnitude of the torque and get the same change in energy:
Yes, that is correct. This is because torque is equal to force multiplied by distance, so if you increase the distance over which the torque is applied, you can decrease the force required to achieve the same amount of work. This principle is known as the conservation of energy, and it is important in many different applications, from simple machines to complex engineering systems.
The relationship between torque (τ), force (F), and distance (r) can be represented by the equation: τ = F × r. When the distance (r) is increased, you can decrease the magnitude of the torque (τ) while maintaining the same change in energy, as long as the product of force (F) and distance (r) remains constant.
By understanding how torque and energy are related, engineers can design more efficient and effective systems that use less energy and produce better results.
To know more about conservation of energy:
https://brainly.com/question/16881881
#SPJ11
A horse is pulling a 53.0 kg plow forward, while the ground exerts a backward force. The horse exerts a 275 N force, and the plow accelerates at 0.222 m/s^2. What is the magnitude (+) of the force the ground exerts on the plow? (unit = N)
A horse is pulling a 53.0 kg plow forward, while the ground exerts a backward force. The magnitude of the force the ground exerts on the plow is approximately 263.23 N.
Given:
Mass of the plow (m) = 53.0 kg
Acceleration of the plow (a) = 0.222 m/s²
The force exerted by the horse (F(horse)) = 275 N
To find the magnitude of the force the ground exerts on the plow, we need to use Newton's second law of motion:
Force (F) = mass (m) × acceleration (a)
F(ground) = F(horse) - (m × a)
F(ground) = 275 - (53.0 × 0.222)
F(ground) = 275 - 11.766
F(ground) = 263.23 N
The magnitude of the force the ground exerts on the plow is approximately 263.23 N.
To know more about the force:
https://brainly.com/question/26115859
#SPJ12
