Answer:
C
Explanation:
The most commonly accepted theory of muscle growth states that microscopic tears within a muscle activate an inflammatory response process that causes dormant cells to build and regenerate muscle tissue; this is option c.
What is the significance of the microscopic tears in muscle?It has negative consequences on the muscle, and it is also known as "microtrauma," which occurs as a result of muscle contraction and is a normal part of the muscle repair and growth process. Here, the fibers in the muscle are damaged, and in response, the body initiates a repair process. This leads to muscle growth and increased strength and is helpful for muscle repair.
Hence, the most commonly accepted theory of muscle growth states that microscopic tears within a muscle activate an inflammatory response process that causes dormant cells to build and regenerate muscle tissue; this is option c.
Learn more about the microscopic tears in muscle here.
https://brainly.com/question/29457664
#SPJ2
When do we land on Mars ?
Answer:
I think like 2024 or 25
Explanation:
Elon musk will probably go
Answer:
2025
Explanation:
The first crew of four astronauts were to land on Mars in 2025. Then, every two years, a new crew of four would arrive.
If you drop a rock off a cliff and it hits the ground 3 seconds later how tall is that cliff
Answer:
Basic kinematics, negating drag and assuming ideal conditions, we use the equation:
d=vi*t+1/2*a*t^2
Since vi is 0 (we know this because you’re dropping it, not throwing it)…
…and the only acceleration acting on it is gravity, a=9.8 m/s^2…
…we get
d=1/2(9.8)(5)^2
Explanation:
Some quick mental math tells us that this is about 125 m.
Plugging it in, we find it to be 122.5 m.
Newton's Third Law predicts that during a collision between two carts, when the sum of the forces acting on the system are zero:
Answer:
The two carts will experience an impulse of the same magnitude, but of opposite directions.
Explanation:
Newton's third law proves that though action and reaction are the same, but they are opposite to each other.
i.e [tex]F_{1}[/tex] = -[tex]F_{2}[/tex]
where: [tex]F_{1}[/tex] and [tex]F_{2}[/tex] have equal value.
Impulse = F x t
where F is the force on the object and t is the time of impact.
In the given question, since the collision takes place in a given time.
Then;
[tex]F_{1}[/tex] x [tex]t_{1}[/tex]= -[tex]F_{2}[/tex] x [tex]t_{2}[/tex]
⇒ [tex]F_{1}[/tex] [tex]t_{1}[/tex]= -[tex]F_{2}[/tex] [tex]t_{2}[/tex]
Thus, since the sum of the forces acting on the system are zero, then the two carts experience an impulse of the same magnitude but opposite in directions.
answer pls urgent pls
Answer:
record vibrations of earthquake
Answer:
[tex]\huge\boxed{\sf Option \ 2}[/tex]
Explanation:
Seismograph is an instrument with is used to record vibrations of earthquake.
Seismographs are basically used to detect seismic waves by which scientists can detect the earth's interior and also can find the depths of earthquakes and their intensity.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AnonymousHelper1807A student made the electromagnet shown and used it to pick up one sewing pin. She
then doubled the number of coils around the nail and used it to pick up two sewing pins.
How could she change the electromagnet again in order to pick up three sewing pins?
A. She could replace the 6V battery with a 3V battery.
B. She could replace the nail in the wire coil with a large steel bolt.
C. She could replace the 6V battery with a 12 V battery.
D. She could replace the nail in the wire coil with a thick roll of paper.
Correct answer is C!
Answer: i think its c but i am not sure tho but i think its she could replace the 6 v battery with a 12 v battery
Explanation: cause a 12 v is stronger than a 6 v battery
A student made the electromagnet shown and used it to pick up one sewing pin. She then doubled the number of coils around the nail and used it to pick up two sewing pins. She could replace the 6V battery with a 12 V battery.
What is electromagnet?Permanent magnets are not the same as electromagnets. Coils of wire with electricity running through them make up electromagnets. An electromagnet's wire coils act like magnets when an electric current flows through them because moving charges produce magnetic fields.
The coils stop functioning as a magnet when the electricity is turned off. A lot of things use electromagnets.
When magnetic forces are only required for brief periods of time, electromagnets are frequently used in electrical equipment.
Therefore, A student made the electromagnet shown and used it to pick up one sewing pin. She then doubled the number of coils around the nail and used it to pick up two sewing pins. She could replace the 6V battery with a 12 V battery.
To learn more about electromagnet, refer to the link:
https://brainly.com/question/3427992
#SPJ5
A soccor ball lies still on the grass until it is kicked by a player. This desribes which of Newton's Laws?
An 80 kg object has a µk = 0.35 and a µs = 0.60. Assuming it is on a flat surface
Answer:
What is the normal force on the object (draw a diagram if needed)
784 N
How much force is required to get the object to start to move from rest (max static friction)?
470.4 N
When the object starts moving, what is the force of kinetic friction?
274.4 N
If the moving object has a tension force of 300N to the right pulling it, what is the net force on the object in the horizontal direction? 784 N
What is the acceleration (with direction) of the object based on your answer for part d? Remember that a = net force/m.
Explanation:
We have that for the Question "" it can be said that the normal force and How much force is required to get the object to start to move from rest is
F_N=784NF_{max}480N
From the question we are told
An 80 kg object has a µk = 0.35 and a µs = 0.60. Assuming it is on a flat surface
What is the normal force on the object (draw a diagram if needed) How much force is required to get the object to start to move from rest?
a)
Generally the equation for the Normal Force is mathematically given as
[tex]F_N=mg\\\\F_N=80*9.8\\\\F_N=784N\\\\[/tex]
b)
[tex]F_{max}=0.60*800\\\\\F_{max}480N\\\\[/tex]
For more information on this visit
https://brainly.com/question/23379286
Complete Question
An 80 kg object has a µk = 0.35 and a µs = 0.60. Assuming it is on a flat surface
What is the normal force on the object (draw a diagram if needed) How much force is required to get the object to start to move from rest?
mtngmrgncseeieeeie what is the unscramble word of this
Answer:
emergencies
Explanation:
This is what I got when I unscrambeled it
i think that would be magnetesium
MULTIPLE CHOICE
Newton’s first law of motion is also known as the law of ______ while the Newton’s 2nd law of motion is known as the law of _____ and Newton’s third law is also known as the law of ______
Answer:
1st law known as low of inertial
2nd law of acelaration and force relationship
3rd law of action and reaction
A 55-kg woman is wearing high heels. If each heel has a circular cross-section 6.0 mm in diameter and she puts all her weight on one heel, how much pressure does that exert on the floor
Answer:
The pressure exerted by the woman on the floor is 1.9061 x 10⁷ N/m²
Explanation:
Given;
mass of the woman, m = 55 kg
diameter of the circular heel, d = 6.0 mm
radius of the heel, r = 3.0 mm = 0.003 m
Cross-sectional area of the heel is given by;
A = πr²
A = π(0.003)²
A = 2.8278 x 10⁻⁵ m²
The weight of the woman is given by;
W = mg
W = 55 x 9.8
W = 539 N
The pressure exerted by the woman on the floor is given by;
P = F / A
P = W / A
P = 539 / (2.8278 x 10⁻⁵ )
P = 1.9061 x 10⁷ N/m²
Therefore, the pressure exerted by the woman on the floor is 1.9061 x 10⁷ N/m²
g Which technology is used to convert the electric current to digital form to store and play the synthesized music on a computer or mobile device
Answer:
"MIDI technology" is the correct answer.
Explanation:
For transmitting digital instrument information, MIDI seems to be a communication standard. Computer synthesizers, as well as electronic keyboards mainly are using. So many other types of equipment, including certain electric percussion, beatboxes, and sometimes even automated stringed instruments including certain guitars as well as violins, do embrace MIDI, nevertheless.So the above is the appropriate response.
Everyday activities do NOT produce significant muscle growth because:
A. Cytokines are released during everyday activities that inhibit (prevent) muscle regeneration.
B. Muscle growth requires going to the gym and lifting weights.
C. The nervous system cannot respond by recruiting more muscle fibers to generate hypertrophy.
D. The body adapts to the repeated demands so that those movements do not produce enough stress to cause hypertrophy (enlarging of the muscle).
Answer:
When elements bond together or when bonds of compounds are broken and form a new substance
Explanation:
Answer:
D
Explanation:
When a spring is compressed, the energy changes from kinetic to potential. Which best describes what is causing this change?
•work
•power
•gravitational energy
•chemical energy
Answer:
work
Explanation:
Answer:
A
Explanation:
A ball was thrown vertically upward on a planet with a velocity of 2.5 m/sec. If it can rise up to 4m,then calculate gravitational strength of the planet.
pleaseeeeeeeeeeee helppppppppppp
Answer:
0.78m/s^2
Explanation:
using the third equation of motion, the answer is found
v^2=u^2 -2gs
where V= 0 at the maximum point
2gs=u^2
g=u^2
2s
g=2.5^2
2(4)
g=0.78125m/s^2
or g=0.78m/s^2
The difference in a brass rod and steel rod is same as 12cm at all temperature .Find the length of the rod at 0°C.(Alpha b =18×10^-6k^-1 and alpha s =12×10^-6k^-1)
Answer:
length of brass=24cm and length of steel rod=36cm
A spring gun fires a ball horizontally at 15 m/s. It is mounted on a flat car moving in a straight line at 25 m/s. relative to the ground, what is the horizontal speed of the ball when the gun is aimed forward?
Answer:
15 m/s
Explanation:
The Speed Of The Car Does Not Add To The Speed Of The Bullet
Which kind of wave interaction is shown?
Answer:
where?
Explanation:
ill edit my answer when see it
Which of these types of land is included under special land use?
Answer:
Special land use basically include all land parcels that cannot be defined in terms of residential and commercial land uses.
Answer:
Applying pesticides
Explanation:
there is a limit on the use of pesticides and it is the only one that is truly applied water is naturally occuring same with rocks and trees and you are applying things to the soil not the other way around
A force of 6.00 N acts in the positive direction on a 3.00 kg object, originally traveling at +15.0 m/s, for 10.0 s. (a) What is the object’s change in momentum?
Answer:
60 kg m/s
Explanation:
F= Force = 6 N
m = Mass of object = 3 kg
u = Initial velocity = 15 m/s
t = Time = 10 s
v = Final velocity
[tex]\Delta p[/tex] = Change in momentum
Force is given by
[tex]F=\dfrac{\Delta p}{t}\\\Rightarrow Ft=\Delta p\\\Rightarrow \Delta p=6\times 10\\\Rightarrow \Delta p=60\ \text{Ns}[/tex]
The change in momentum of the object is 60 kg m/s.
A video game where characters fight on different platforms needs to constantly update the speed and position of the characters. Which measure would be an initial condition in one of these games?
the size of the character in pixels
the downward acceleration due to gravity
the designation of y=0 as the lowest platform
the speed of a character at the moment of contact
Answer:
d: the speed of a character at the moment of contact
Explanation:
did the quick check
The measure which would be an initial condition in one of these games is
speed of a character at the moment of contact.
The speed of the character at the point of contact is the most suitable
option which tells the exact speed and position of the character in the
video game.
The moment of contact will determine the type of movement and position
exhibited by the players which can then be immediately updated when the
game is being played.
Read more on https://brainly.com/question/19128512
Which best describes what occurs when technology advances
Answer: Technology advancement includes the creation of printhead arrays and multiple carriage systems that cover a larger area of cloth in a single pass of the substrate.
Explanation:
Two balls collide in a head-on elastic collision and rebound in opposite directions. One ball has velocity 1.2 m/s before the collision, and −2.3 m/s after. The other ball has a mass of 1.1 kg and a velocity of −4.2 m/s before the collision. (a) What is the mass of the first ball? (b) What is the velocity of the second ball after the collision?
Answer:
If two particles are involved in an elastic collision, the velocity of the second particle after collision can be expressed as: v2f=2⋅m1(m2+m1)v1i+(m2−m1)(m2+m1)v2i v 2 f = 2 ⋅ m 1 ( m 2 + m 1 ) v 1 i + ( m 2 − m 1 ) ( m 2 + m 1 ) v 2 i .
Explanation:
Mark me as brainliest and follow me
Cecelia dropped a ball from a height of 2 m. The ball fell in a straight path down to the ground.
According to Newton’s universal law of gravitation, which would change the path of the ball so it traces out the widest curved path possible?
tossing it horizontally at a slower speed
tossing it horizontally at a faster speed
dropping it from a shorter distance
dropping it from a greater distance
A baseball player hits a ball with a bat. At one moment the force exerted by the bat on the ball is 18,000 N. At that same moment, how much force is exerted on the bat by the ball?
a) 18,000 N
b) less than 18,000 N
c) more than 18,000 N
Answer:
Less than 18000N
Explanation:
Given
[tex]Force\ Exerted = 18000N[/tex]
This question will be answered using Newton's third law.
Understanding this law, it implies that reaction force is equal and opposite to the force exerted.
This implies that;
If the force exerted on the ball is 18000N
the force exerted is -18000N
So, the option that answers the question is less than 18000N because -18000N < 18000N
A pushing force acts on a toy car for 3 seconds causing it to accelerate at a rate A’. If the car is replaced with a similar, but larger toy of 2 times greater mass and the same pushing force is applied for the same amount of time, the acceleration of the larger toy car will be
Answer:
one-half of A'
Explanation:
Answer:
C
Explanation:
EDGE 2021
i need this ASAP please!!!
What is the significance of the discovery of exoplanets?
a. they may possibly be inhabited or harbor life.
b. they can provide natural resources for the future.
c. they help our understanding of the formation of planetary bodies.
d. they help calibrate gps satellites.
e. they help understand the nature of the expansion of the universe.
Answer:
C. the help our understanding of the formation of planetary bodies.
Explanation:
this is the answer of PLATO
Intense physical activity that requires little oxygen but uses short bursts of energy is called Anaerobic exercise? True or false 
Mice produce a large number of offspring all year long, yet the number of mice within a given population changes very little from year to year. The stability of the population size is most likely the result of
Group of answer choices
mice continuing to reproduce when its population is to large.
liming factors that keep the mice population stable
the survival of more female mice than male mice.
the development of mutations in young mice.
A cat is trying to cross the street. Its velocity v as a function of time t is given in the graph below where
rightwards is the positive velocity direction.
v (m/s)
5
4
3
2+
2
1
5
-2
-3-
-4
-5
What is the cat's displacement Ax from t = 0.5 s to 1.5 s?
Answer:
rightwards is the positive velocity
Rightwards is the positive elicitation:
Answer:
3.8
Explanation:
A force of 1.50 N acts on a 0.20 kg trolley so as to accelerate it along an air track.
The track and force are horizontal and in line. How fast is the trolley going after acceleration from rest through 30 cm, if friction is negligible?
Answer: The trolley is moving at 2.12m/s
Explanation:
Given from the question that the track and force are horizontal and inline, we have that
F= ma
where F= force= 1.50 N
m= mass = 0.2kg
therefore Acceleration , a = F/ m= 1.50/0.2 =7.5 m/s^2
To find how fast the trolley is going ie the Velocity, v
Having that
initial velocity at rest , u = 0,
acceleration a = 7.5 and
and distance, s = 30 cm = 30/100 = 0.30 m
we use motion equation that
v² = u² + 2 a s
v² = 0² + 2 x 7.5 x 0.30
v² = 4.5
v = [tex]\sqrt{4.5}[/tex]
v = 2.12 m/s
