Answer:
[tex]m=20kg[/tex]
Explanation:
Hello,
In this case, we define the kinnetic energy as:
[tex]K=\frac{1}{2} m*v^2[/tex]
Thus, for finding the mass we simply solve for it on the previous equation given the kinetic energy and the velocity:
[tex]m=\frac{2*K}{v^2}=\frac{500kg*\frac{m^2}{s^2} }{(5\frac{m}{s})^2} =\frac{500kg*\frac{m^2}{s^2} }{25\frac{m^2}{s^2}}\\\\m=20kg[/tex]
Best regards.
Answer:
The answer is 40 kg
Explanation:
You will this formula below:
m=[tex]\frac{2*\\KE}{v^{2} }[/tex]
Now we know our formula, now we plug in the given numbers:
m=[tex]\frac{2(500J)}{(5m/s)^2}[/tex]
Simplify and we get:
m=40 kg
I hope this was helpful.
An aqueous KNO3 solution is made using 72.5 g of KNO3 diluted to a total solution volume of 2.00 L. Calculate the molarity, molality, and mass percent of the solution. (Assume the density of 1.05 g/mL for the solution.)
Answer:
The molarity is 0.359[tex]\frac{moles}{L}[/tex]
The molality is 0.354 [tex]\frac{moles}{kg}[/tex]
The mass percent of the solution es 3.45%
Explanation:
Molarity is a unit of concentration that indicates the amount of moles of solute that appear dissolved in each liter of the mixture. It is determined by:
[tex]Molarity (M)=\frac{number of moles of solute}{volume}[/tex]
Being:
K: 39 g/moleN: 14 g/moleO: 16 g/moleThe molar mass of KNO₃ is:
KNO₃= 39 g/mole + 14 g/mole + 3*16 g/mole= 101 g/mole
You can apply the following rule of three: if 101 grams of KNO₃ are present in 1 mole, 72.5 grams in how many moles are present?
[tex]moles of KNO_{3}=\frac{72.5 grams*1 mole}{101 grams}[/tex]
moles of KNO₃= 0.718
So you have:
moles of KNO₃= 0.718volume= 2 LApplying this quantity in the definition of molarity:
[tex]molarity=\frac{0.718 moles}{2 L}[/tex]
Molarity= 0.359[tex]\frac{moles}{L}[/tex]
The molarity is 0.359[tex]\frac{moles}{L}[/tex]
Molality is a way of measuring the concentration of solute in solvent and indicates the amount of moles of solute in each kilogram of solvent.
Then the molality is calculated by:
[tex]Molality=\frac{moles of solute}{mass of solvent in kilograms}[/tex]
Density is defined as the property that matter, whether solid, liquid or gas, has to compress in a given space. That is, it is the amount of mass per unit volume. So, if the density of 1.05 g / mL for the solution indicates that in 1 mL of solution there are 1.05 grams of solution, in 2000 mL (where 2L = 2000 mL, because 1 L = 1000mL) how much mass is there?
[tex]mass=\frac{2000 mL*1.05 grams}{1 mL}[/tex]
mass= 2100 grams
Since mass solution = mass water + mass KNO₃
then mass water = mass solution - mass KNO₃
Being mass solution 2100 grams and mass KNO₃ 72.5 grams, and replacing you get: mass water= 2100 grams - 72.5 grams
mass water= 2,027.5 grams
Then, being:
moles of KNO₃= 0.718mass of solvent in kilograms= 2.0275 kg (being 2,027.5 grams= 2.0275 kilograms because 1,000 grams= 1 kilogram)Replacing in the definition of molality:
[tex]molality=\frac{0.718 moles}{2.0275 kg}[/tex]
molality= 0.354 [tex]\frac{moles}{kg}[/tex]
The molality is 0.354 [tex]\frac{moles}{kg}[/tex]
The mass percent of a solution is the number of grams of solute per 100 grams of solution. Then the mass percent is the mass of the element or solute divided by the mass of the compound or solute and the result of which is multiplied by 100 to give a percentage.
[tex]mass percent=\frac{mass of solute}{mass of solution} *100[/tex]
So, in this case:
[tex]mass percent=\frac{72.5 grams}{2100 grams} *100[/tex]
mass percent= 3.45 % KNO₃ by mass
The mass percent of the solution es 3.45%
The molarity of the solution is 0.36 mol/L. The molality of the solution is 0.34 m. The mass percent of the solution is 3.33%.
Number of moles of KNO3 = mass/molar mass = 72.5 g/101 g/mol = 0.72 moles
Molarity = Number of moles / volume = 0.72 moles/ 2.00 L = 0.36 mol/L
The molality = Number of moles of solute/Mass of solution in kilograms
mass of solution = 1.05 g/mL × 2000 mL = 21000 g or 2.1Kg
Molality of solution = 0.72 moles/2.1 Kg = 0.34 m
Mass percent of solution = mass of solute/mass of solution × 100/1
Mass percent of solution = 72.5 g/ (72.5 g + 2100 g) × 100/1
= 3.33%
Lear more:https://brainly.com/question/11897796
What is the equilibrium constant for the following reaction:HCO2H(aq) + CN–(aq) HCO2–(aq) + HCN(aq)Does the reaction favor the formation of reactants or products? The acid dissociation constant, Ka, for HCO2H is 1.8 x 10–4and the acid dissociation constant for HCN is 4.0 x 10–10.(A) K = 1.00. The reaction favors neither the formation of reactants nor products.(B) K = 2.2 x 10–6. The reaction favors the formation of products.(C) K = 2.2 x 10–6. The reaction favors the formation of reactants.(D) K = 4.5 x 105. The reaction favors the formation of products.(E) K = 4.5 x 105. The reaction favors the formation of reactants.
Answer:
(D) K = 4.5 x 10⁵. The reaction favors the formation of products
Explanation:
HCOOH + CN⁻ ⇆ HCOO⁻ + HCN
K = [HCOO⁻] [ HCN ] / [ HCOOH] [ CN⁻]
HCOOH ⇄ H ⁺ + COO⁻
K₁ = [ H⁺] [ COO⁻ ] / [HCOOH ]
HCN ⇆ H⁺ + CN⁻
K₂ = [ H⁺] [ CN⁻] / [ HCN ]
K₁ / K₂
= [ H⁺] [ COO⁻ ] / [HCOOH ] X [ HCN ] / [ H⁺] [ CN⁻]
= [ COO⁻ ][ HCN ] / [HCOOH ] [ CN⁻]
= K
K = K₁ / K₂
= 1.8 x 10⁻⁴ / 4 x 10⁻¹⁰
= 4.5 x 10⁵
So equilibrium constant of the reaction
HCOOH + CN⁻ ⇆ HCOO⁻ + HCN
is very high . Hence reaction favours the formation of product.
option (D) is correct.
a binary ionic compound is made of two components name one of them
Answer:
CATION
Explanation:
It's one is the action and the mother is a cation.
From the unbalanced reaction: B2H6 + O2 ---> HBO2 + H2O
How many grams of O2 (32g/mol) will be needed to burn 36.1 g of B2H6 (Molar mass = 27.67g/mol)? ______g
Include the correct number of significant figures in your final answer
Answer: 125 g
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} B_2H_6=\frac{36.1g}{17}=1.30moles[/tex]
The balanced reaction is:
[tex]B_2H_6+3O_2\rightarrow 2HBO_2+2H_2O[/tex]
According to stoichiometry :
1 mole of [tex]B_2H_6[/tex] require = 3 moles of [tex]O_2[/tex]
Thus 1.30 moles of [tex]B_2H_6[/tex] will require=[tex]\frac{3}{1}\times 1.30=3.90moles[/tex] of [tex]O_2[/tex]
Mass of [tex]O_2=moles\times {\text {Molar mass}}=3.90moles\times 32g/mol=125g[/tex]
Thus 125 g of [tex]O_2[/tex] will be needed to burn 36.1 g of [tex]B_2H_6[/tex]
The equilibrium constant for the reaction NO2(g)+NO3(g)→N2O5(g) is 2.1x10-20 , therefore: a. At equilibrium, the concentration of products and reactants is about the same. b. At equilibrium, the concentration of products is greater than the reactants. c. At equilibrium, the concentration of reactants is greater than the products
Answer: c. At equilibrium, the concentration of reactants is greater than the products
Explanation:
Equilibrium constant for a reaction is the ratio of concentration of products to the concentration of reactants each raised to the power its stoichiometric coefficients.
For the reaction:
[tex]NO_2(g)+NO_3(g)\rightleftharpoons N_2O_5(g)[/tex]
Equilibrium constant is given as:
[tex]K_{eq}=\frac{[N_2O_5]}{[NO_2]\times [NO_3]}[/tex]
[tex]2.1\times 10^{-20}=\frac{[N_2O_5]}{[NO_2]\times [NO_3]}[/tex]
When
a) K > 1, the concentration of products is greater than the concentration of reactants
b) K < 1, the concentration of reactants is greater than the concentration of products
c) K= 1, the reaction is at equilibrium, the concentration of reactants is equal to the concentration of products
Thus as [tex]K_{eq}[/tex] is [tex]2.1\times 10^{-20}[/tex] which is less than 1,
the concentration of reactants is greater than the concentration of products
In E. coli, the enzyme hexokinase catalyzes the reaction: Glucose + ATP → glucose 6-phosphate + ADP The equilibrium constant, Keq, is 7.8 x 102. In the living E. coli cells, [ATP] = 7.9 mM; [ADP] = 1.04 mM, [glucose] = 2 mM, [glucose 6-phosphate] = 1 mM. Determine if the reaction is at equilibrium. If the reaction is not at equilibrium, determine which side the reaction favors in living E. coli cells.
Answer:
Explanation:
Glucose + ATP → glucose 6-phosphate + ADP The equilibrium constant, Keq, is 7.8 x 102.
In the living E. coli cells,
[ATP] = 7.9 mM;
[ADP] = 1.04 mM,
[glucose] = 2 mM,
[glucose 6-phosphate] = 1 mM.
Determine if the reaction is at equilibrium. If the reaction is not at equilibrium, determine which side the reaction favors in living E. coli cells.
The reaction is given as
Glucose + ATP → glucose 6-phosphate + ADP
Now reaction quotient for given equation above is
[tex]q=\frac{[\text {glucose 6-phosphate}][ADP]}{[Glucose][ATP]}[/tex]
[tex]q=\frac{(1mm)\times (1.04 mm)}{(7.9mm)\times (2mm)} \\\\=6.582\times 10^{-2}[/tex]
so,
[tex]q<<K_e_q[/tex] ⇒ following this criteria the reaction will go towards the right direction ( that is forward reaction is favorable until q = Keq
Aspirin is usually packaged with
A. acetic anhydride
B. salicylic acid
C. buffering agents
Answer:
Aspirin is usually packaged with C. buffering agents.
Explanation:
Glycine, C2H5O2N, is important for biological energy. The combustion reaction of glycine is given by the equation 4C2H5O2N(s) + 9O2(g) → 8CO2(g) + 10H2O(l) + 2N2(g) ΔH°rxn = –3857 kJ/mol Given that ΔH°f[CO2(g)] = –393.5 kJ/mol and ΔH°f[H2O(l)] = –285.8 kJ/mol, calculate the enthalpy of formation of glycine.
Answer:
ΔH°f C₂H₅O₂N(s) = -537.2kJ
Explanation:
Based on the reaction:
4 C₂H₅O₂N(s) + 9O₂(g) → 8CO₂(g) + 10H₂O(l) + 2N₂(g)
ΔHrxn = ΔH°f products - ΔH°f reactants.
As:
ΔH°fO₂(g) = 0
ΔH°fCO₂(g) = -393.5kJ/mol
ΔH°fH₂O(l) = -285.8kJ/mol
ΔH°fN₂(g) = 0
The ΔHrxn is:
ΔHrxn = (8×-393.5kJ/mol + 10×-285.8kJ/mol) - (4×ΔH°fC₂H₅O₂N(s)) = -3857kJ/mol
-6006kJ/mol - (4×ΔH°fC₂H₅O₂N(s)) = -3857kJ/mol
-4×ΔH°fC₂H₅O₂N(s) = 2149kJ/mol
ΔH°fC₂H₅O₂N(s) = 2149kJ/mol / -4
ΔH°f C₂H₅O₂N(s) = -537.2kJList three ways the rate of solvation of sodium chloride in water may be
increased
Answer:
1) Increasing temperature
2) Stirring
3) Increasing surface area of salt by grinding it
Describe why some acids are strong while other acids are weak
Answer:
I hope this help you. Mark me as brainliest and rate pleaseExplanation:
the terms strong and weak as applied to acids. As a part of this it defines and explains what is meant by pH, Ka and pKa.
It is important that you don't confuse the words strong and weak with the terms concentrated and dilute.
As you will see below, the strength of an acid is related to the proportion of it which has reacted with water to produce ions. The concentration tells you about how much of the original acid is dissolved in the solution.
It is perfectly possible to have a concentrated solution of a weak acid, or a dilute solution of a strong acid.
How many moles of H2 are needed to produce 34.8 moles of NH3?
2 i hope this helps
:)✨✨✨✨✨✨
Benzene can be converted to 1,3,5-tribromobenzene in five reaction steps and four intermediate compounds. Select the appropriate reagent from the followings.
Br2, R2O2
CH3Cl, AlCl3
CH3COCl, AlCl3
NaNO2, HCl
HNO3, H2SO4
H3PO2
H3PO4
KMnO4
Answer:
The appropriate reagent is: H3PO2.
Explanation:
H3PO2 is in charge of eliminating the amino group by diazotization, remember that the amino group had previously achieved bromination at positions m; that is to say that it achieved in the beginning that the three bromine atoms of 1,2,4 tribromobenzene were introduced in the meta positions among themselves, which finally corresponds as part of the last reaction to the 1,3,5-tribromobenzene position.
Chemical formula for copper gluconate I have 1.4g of Copper gluconate. There is .2g of copper within the copper gluconate. Determine the chemical formula for Copper gluconate with the given information: Copper Gluconate: Cu(C6H11O?)? Cu = 63.55 g/mol H = 12.01 g/mol O = 1.008 g/mol Cu = 63.55 g/mol
Answer:
The simplest chemical formula of the compound is Cu(C₆H₁₁O₇)₂
Explanation:
Given mass of sample = 1.4 g
mass of copper in the sample = 0.2 g
mass of the gluconate =1.4 - 0.2 = 1.2 g
The mole ratio is determined first using the formula;
mole ratio = reacting mass / atomic mass
atomic mass of copper = 63.55
mass of gluconate, C₆H₁₁O₇ = 12*6 + 1*11 + 16*7 = 195 g/mol
mole ratio ( copper : gluconate) = 0.2/63.55 : 1.4/195
mole ratio ( copper : gluconate) = 0.003 : 0.007
convert to whole number ratios by dividing with the smallest ratio
mole ratio ( copper : gluconate) = 0.003/0.003 : 0.007/0.003
mole ratio ( copper : gluconate) = 1 : 2
Therefore, the simplest chemical formula of the compound is Cu(C₆H₁₁O₇)₂
A gas has a volume of 6.6 L at a temperature of 40 C. What is the volume of
the gas if the temperature changes to 15 C?
Answer:
6.07 L
Explanation:
It appears that the reading has been made at constant pressure .
At constant pressure , the gas law formula is
V/T = constant V is volume and T is temperature of the gas.
V₁ / T₁ = V₂ / T₂
V₁ = 6.6 L ,
T₁ = 40°C
= 273 + 40
= 313 K
T₂ = 15+ 273
= 288K
V₂ = ?
Putting the values in the formula above
6.6 / 313 = V₂ / 288
V₂ = 6.07 L.
What is the molar mass of CH2O2 ? ( C= 12.01 g/mol, H=1.008 g/mol, O=16.00)
Answer:
Molar Mass of CH2O2 is 46.026
Explanation:
What is the molar mass of CH2O2 ? ( C= 12.01 g/mol, H=1.008 g/mol, O=16.00)
C = 12.01g/mol
H = 1.008g/mol
O = 16g/mol
CH2O2 = 12.01+1.008x2+16x2 = 46.026g/mole
Hcl and 1-isopropylcyclohexane formation
Answer:
Spahgetti
Explanation:
Consider this reaction:
2Cl2O5 —> 2Cl2 + 5O2
At a certain temperature it obeys this rate law.
rate = (2.7.M^-1•s^-1) [Cl2O5]^2
Suppose a vessel contains Cl2O5 at a concentration of 0.600M. calculate how long it takes for the concentration of Cl2O5 to decrease by 94%. you may assume no other reaction is important. round your answer to two digits
Answer:
[tex]t=9.7s[/tex]
Explanation:
Hello,
In this case, we have a second order kinetics given the second power of the concentration of chlorine (V) oxide in the rate expression, thus, the integrated equation for the concentration decay is:
[tex]\frac{1}{[Cl_2O_5]}=kt+\frac{1}{[Cl_2O_5]_0}[/tex]
Thus, the final concentration for a 94% decrease is:
[tex][Cl_2O_5]=0.600M-0.600M*0.94=0.036M[/tex]
Therefore, we compute the time for such decrease:
[tex]kt=\frac{1}{[Cl_2O_5]}-\frac{1}{[Cl_2O_5]_0}=\frac{1}{0.036M}-\frac{1}{0.60M} =26.1M^{-1}[/tex]
[tex]t=\frac{26.1M^{-1}}{k}= \frac{26.1M^{-1}}{2.7M^{-1}*s^{-1}}\\\\t=9.7s[/tex]
Regards.
Which of the following is an example of a mechanical wave?
O A. A light ray
B. A seismic wave
C. A radio wave
D. An X-ray
Answer:
A seismic wave
Explanation:
It requires a medium for its propagation.
Photochromic lenses contain Group of answer choices both AgCl and CuCl embedded in the glass. only AgCl embedded in the glass. neither AgCl nor CuCl embedded in the glass. only CuCl embedded in the glass.
Answer:
both AgCl and CuCl embedded in the glass
Explanation:
Photochromic lenses contain both AgCl and CuCl embedded in the glass.
They are light-sensitive lenses that adapt to environmental changes. They appear clear when in an apartment or a building and automatically darken when outside as a result of exposure to sunlight. The darkening is activated by the UV component of the sunlight.
Photochromic lenses are otherwise known as light-adaptive or intelligent lenses and they are formed by coating lenses with silver chloride compounds whose concentration ranges from 0.01 to 0.001 %. Copper (I) chloride is also included in addition to the silver halide.
In summary, photochromic lenses contain both AgCl and CuCl.
A 8.00g of a certain Compound X, known to be made of carbon, hydrogen and perhaps oxygen, and to have a molecular molar mass of 44./gmol, is burned completely in excess oxygen, and the mass of the products carefully measured: product mass carbon dioxide 24.01g water 13.10g Use this information to find the molecular formula of X.
Answer:
C3H6.
Explanation:
Data obtained from the question:
Mass of the compound = 8g
Mass of CO2 = 24.01g
Mass of H2O = 13.10g
Next, we shall determine the mass of C, H and O present in the compound. This is illustrated below:
Molar Mass of CO2 = 12 + (2x16) = 44g/mol
Molar Mass of H2O = (2x1) + 16 = 18g/mol
Mass of C in compound = Mass of C/Molar Mass of CO2 x 24.01
=> 12/44 x 24.01 = 6.5g
Mass of H in the compound = Mass of H/Molar Mass of H2O x 13.1
=> 2x1/18 x 13.1 = 1.5g
Mass of O in the compound = Mass of compound – (mass of C + Mass of H)
=> 8 – (6.5 + 1.5) = 0
Next, we shall determine the empirical formula of the compound. This is illustrated below:
C = 6.5g
H = 1.
Divide by their molar mass
C = 6.5/12 = 0.54
H = 1.4/1 = 1.
Divide by the smallest
C = 0.54/0.54 = 1
H = 1/0.54 = 2
Therefore, the empirical formula is CH2
Finally, we shall determine the molecular formula as follow:
The molecular formula of a compound is a multiple of the empirical formula.
Molecular formula = [CH2]n
[CH2]n = 44
[12 + (2x1)]n = 44
14n = 44
Divide both side by 14
n = 44/14
n = 3
Molecular formula = [CH2]n = [CH2]3 = C3H6
Therefore, the molecular formula of the compound is C3H6
Propane (C3H8) is widely used in liquid form as a fuel for barbecue grills and camp stoves. For 67.7 g of propane, determine the following.(a) Calculate the moles of compound.mol(b) Calculate the grams of carbon.g
Answer:
A. 1.54 mole.
B. 55.39g of carbon
Explanation:
A. Determination of the number of mole in 67.7g of C3H8.
Mass of C3H8 = 67.7g
Molar mass of C3H8 = (3x12) + (8x1) = 44g/mol
Number of mole of C3H8 =..?
Number of mole = Mass/Molar Mass
Number of mole of C3H8 = 67.7/44
Number of mole of C3H8 = 1.54 mole
B. Determination of the mass of carbon in the compound.
This is illustrated below:
The mass of C in compound can be obtained as follow:
=> 3C/C3H8 x 67. 7
=> 3x12 / 44 x 67.7
=> 36/44 x 67.7
=> 55.39g
Therefore, 55.39g of carbon is present in the compound.
The emission line used for zinc determinations in atomic emission spectroscopy is 214 nm. If there are 6.00×1010 atoms of zinc emitting light in the instrument flame at any given instant, what energy (in joules) must the flame continuously supply to achieve this level of emission?
Ba(OH)2:_______.
A. 1 barium atom, 1 oxygen atom and 1 hydrogen atom.
B. 1 barium atom, 1 oxygen atom and 2 hydrogen atoms.
C. 1 barium atom, 2 oxygen atoms and 2 hydrogen atoms.
D. 1 barium atom, 2 oxygen atoms and 1 hydrogen atom.
Answer: D
Explanation: Expand this (OH)2 you will get 2O, 2H
Hence 1Ba, 2O, 2H
Answer:
B. 1 barium atom, 1 oxygen atom and 2 hydrogen atoms.
The fluoride ion is the conjugate base of the weak acid hydrofluoric acid. The value of Kb for F-, is 1.39×10-11. Write the equation for the reaction that goes with this equilibrium constant.
Answer:
F⁻(aq) + H₂O(l) ⇄ HF(aq) + OH⁻(aq)
Explanation:
According to Brönsted-Lowry acid-base theory, an acid is a substance that donates H⁺ ions. In this sense, hydrofluoric acid is an acid according to the following equation.
HF(aq) + H₂O(l) ⇄ F⁻(aq) + H₃O⁺(aq)
According to Brönsted-Lowry acid-base theory, a base is a substance that accepts H⁺ ions. In this sense, the fluoride ion is a base according to the following equation.
F⁻(aq) + H₂O(l) ⇄ HF(aq) + OH⁻(aq)
The equilibrium constant for this reaction is Kb = 1.39 × 10⁻¹¹.
The calculated yield for the production of carbon dioxide was 73.4g. When the
experiment was performed in the lab, a yield of 72.3g was produced. What is the
percent yield of carbon dioxide?
Answer:10 grams of CO2
Explanation:
Yeild= exp. yeild÷ thoretical yeild × 100
Yeild= 73.3÷73.4 × 100
Yeild= 0.1 ×100
Yeild= 10
Discuss any give ways by which
the falling moral standards of Ghanaian
youth can be minimised.
Answer:
The falling standards of Ghanaian youths can be minimized by proper upbringing of the children by their parents. The youths should be taught about what is wrong or right and there should be a corresponding reward for those who do good and exceptional in order to encourage others in towing that line and punishment should also be meted out to those who break the law. Mediocrity shouldn’t be celebrated and the elders should lead by example.
These will make the falling standards of Ghanaian youth get reduced.
A student dissolved 5.00 g of Co(NO3)2 in enough water to make 100. mL of stock solution. He took 4.00 mL of the stock solution and then diluted it with water to give 275. mL of a final solution. How many grams of NO3- ion are there in the final solution?
Answer:
0.136g
Explanation:
A student dissolved 5.00 g of Co(NO3)2 in enough water to make 100. mL of stock solution. He took 4.00 mL of the stock solution and then diluted it with water to give 275. mL of a final solution. How many grams of NO3- ion are there in the final solution?
[tex]Co(NO_3)_2(aq)\rightarrow Co^{2+}(aq)+2NO_3^{-}(aq)[/tex]
Initial mole of Co(NO3)2 [tex]=\frac{mass}{molar mass}[/tex]
[tex]=\frac{5.00}{182.94} \\\\=0.02733mol[/tex]
Mole of Co(NO3)2 in final solution
[tex]=\frac{4.00}{100}\times 0.02733\\\\=0.04\times 0.02733\\\\= 0.001093mol[/tex]
Mole of NO3- in final solution = 2 x Mole of Co(NO3)2
[tex]=2\times 0.001093\\\\=0.002186mol[/tex]
Mass of NO3- in final solution is mole x Molar mass of NO3
[tex]=0.002186\times62.01\\\\=0.136g[/tex]
The final solution contains 0.24 g of nitrate ion.
Number of moles of Co(NO3)2 = 5.00 g/183 g/mol = 0.027 moles
Number of moles = concentration × volume
concentration = Number of moles /volume
Volume of solution = 100 mL or 0.1 L
concentration = 0.027 moles/0.1 L = 0.27 M
Using the dilution formula;
C1V1 = C2V2
C1 = 0.27 M
V1 = 4.00 mL
C2 = ?
V2 = 275. mL
C2 = C1V1/V2
C2 = 0.27 × 4.00/ 275
C2 = 0.0039 M
Number of moles of NO3- ion in Co(NO3)2 = 0.0039 M × 62 g/mol = 0.24 g
Learn more: https://brainly.com/question/1340582
What is Hess‘s law please help
The correct answer is D. Hess's law states than the enthalpy of a reaction does not depend on the reaction path
Explanation:
In a chemical reaction, the enthalpy refers to the internal energy in a system and how this increases or decreases during the reaction. According to Hess's law proposed by German Hess in 1940, the enthalpy does not depend on the reaction path or the number of steps in a reaction. This means one reaction of only one step will have the same enthalpy that if the reaction occurs in several steps because the energy that requires all the process is the same. Thus, the "Hess's law states than the enthalpy of a reaction doe s not depend on the reaction path".
what is the chemical symbol and name of the third element in the periodic table
Answer: Aluminum symbol Al or aluminum American English
Explanation:
Answer:
Hii
Li( Lithium)
Explanation:
Lithium has the atomic number of three and is the third element in periodic table.
A blood sample is left on a phlebotomy tray for 4 hours before it is delivered to the laboratory. Which group of tests could be performed:
