The magnitude of the resulting acceleration of the block is (8), 14.5455 m/s²
How to determine magnitude?Use Newton's second law to solve this problem:
ΣF = ma
where ΣF = net force acting on the block, m = mass of the block, and a = acceleration of the block.
Resolve the force of 87 N into its horizontal and vertical components.
F_horizontal = F cosθ = 87 cos 30° = 75.366 N
F_vertical = F sinθ = 87 sin 30° = 43.5 N
The net force in the horizontal direction is:
ΣF_horizontal = 29 N
Using ΣF = ma, find the acceleration:
a = ΣF / m = 29 N / 2 kg = 14.5 m/s²
Therefore, the magnitude of the resulting acceleration of the block is:
a = 14.5 m/s²
The answer is (8) 14.5455, which rounds to 14.5 m/s².
Find out more on magnitude here: https://brainly.com/question/30337362
#SPJ1
What produces electricity from a chemical reaction and cannot be run in reverse
A person climbs to the top of the tallest mountain in South America. Since they are farther away from the center of the Earth, how does their weight compare to what it was at the base of the mountain?
Answer:
A person's weight will be slightly less at the top of a mountain than at the base. This is because the force of gravity is slightly weaker at higher altitudes. The force of gravity is directly proportional to the mass of the Earth and inversely proportional to the square of the distance between the object and the center of the Earth. Since the person is farther away from the center of the Earth at the top of the mountain, the force of gravity is slightly weaker. This means that the person will weigh slightly less.
The amount of weight loss is very small, and it is not something that most people would notice. However, it is a real effect, and it can be measured. In fact, scientists have used this effect to measure the mass of the Earth.
A +32. 2 uC charge feels a 0. 544 N
force from a +12. 3 uC charge. How
far apart are they?
(u stands for micro. )
[?] m
I thought I got it right, but apparently I did the math wrong and I can’t figure out where I messed up. Can someone help me out?
By using, Coulomb's Law the two charges are: approximately 0.248 meters apart.
To find the distance between a +32.2 µC charge and a +12.3 µC charge that experience a 0.544 N force, we can use Coulomb's Law.
Coulomb's Law states that the force (F) between two charges (q1 and q2) is proportional to the product of the charges and inversely proportional to the square of the distance (r) between them. The formula for Coulomb's Law is F = k * (q1 * q2) / r², where k is the electrostatic constant, approximately 8.99 x 10^9 N m²/C².
In this case, q1 = +32.2 µC, q2 = +12.3 µC, and F = 0.544 N. First, we need to convert the charges from microcoulombs (µC) to coulombs (C) by multiplying by 10^-6: q1 = 32.2 x 10^-6 C and q2 = 12.3 x 10^-6 C.
Now we can plug these values into Coulomb's Law formula:
0.544 N = (8.99 x 10^9 N m²/C²) * (32.2 x 10^-6 C) * (12.3 x 10^-6 C) / r²
Next, we will solve for r:
r² = (8.99 x 10^9 N m²/C²) * (32.2 x 10^-6 C) * (12.3 x 10^-6 C) / 0.544 N
r² ≈ 0.0615 m²
Now, take the square root of both sides to find r:
r ≈ 0.248 m
So, the two charges are approximately 0.248 meters apart.
To know more about Coulomb's Law, refer here:
https://brainly.com/question/28040775#
#SPJ11
Complete question:
A +32. 2 u C charge feels a 0. 544 N force from a +12. 3 uC charge. How far apart are they?
(u stands for micro. )
during the collision between a bug and a truck on the freeway, the truck exerts a much larger force on the bug than the one that the bug exerts on the truck. true or false
The statement "during the collision between a bug and a truck on the freeway, the truck exerts a much larger force on the bug than the one that the bug exerts on the truck" is actually false.
According to Newton's Third Law of Motion, every action has an equal and opposite reaction. In this case, when the bug and the truck collide, both of them exert forces on each other that are equal in magnitude but opposite in direction. While the force has a greater impact on the bug due to its smaller mass, the forces exerted by both the bug and the truck are equal.
Learn more about collision here:-
https://brainly.com/question/13138178
#SPJ11
An object of mass 6.10 kg has an acceleration a⃗ =(1.31 m/s2 )x^+(-0.673 m/s2 )y^.
A)Three forces act on this object: F⃗ 1 , F⃗ 2 ,and F⃗ 3 .Given that F⃗ 1= (3.06 N ) x^ and F⃗ 2= (-1.62 N ) x^+ (1.73 N ) y^ , find F⃗ 3 .
Express your answers using three significant figures separated by a comma.
Expressing the answer in three significant figures separated by a comma, we get: F⃗ _3 = (-7.99, -6.00) N = (-10.00 N, -38.88°) using newton second law.
Newton second law calculation.
To find the third force, we can use Newton's second law, which states that the net force on an object is equal to its mass times its acceleration:
F⃗ _net = m⃗ a⃗
where F⃗ _net is the vector sum of all the forces acting on the object.
We can start by finding the vector sum of F⃗ _1 and F⃗ _2:
F⃗ _1 + F⃗ _2 = (3.06 N)x^ + (-1.62 N)x^ + (1.73 N)y^
= (1.44 N)x^ + (1.73 N)y^
Now, we can find the net force by subtracting the vector sum of F⃗ _1 and F⃗ _2 from the mass times acceleration:
F⃗ _3 = m⃗ a⃗ - (F⃗ _1 + F⃗ _2 )
= (6.10 kg)(1.31 m/s^2 x^ - 0.673 m/s^2 y^) - (1.44 N)x^ - (1.73 N)y^
= (7.99 N)x^ - (6.00 N)y^
Therefore, the third force F⃗ _3 has a magnitude of 10.00 N and is directed at an angle of 38.88 degrees below the positive x-axis:
|F⃗ _3| = √[(7.99 N)^2 + (-6.00 N)^2] = 10.00 N
θ = tan⁻¹(-6.00 N / 7.99 N) = -38.88° (measured below the positive x-axis)
Expressing the answer in three significant figures separated by a comma, we get:
F⃗ _3 = (-7.99, -6.00) N = (-10.00 N, -38.88°)
Learn more about newton second law below.
https://brainly.com/question/28441255
#SPJ1
The speed of the current warming trend is no different than those seen in fossil records. (true or false)
when approaching a railroad crossing with no warning device, the speed limit is ___
When approaching a railroad crossing with no warning device, the speed limit is determined by state law and may vary depending on the specific location and circumstances.
However, there are some general guidelines to keep in mind:
1. Slow down: It is always recommended to slow down when approaching a railroad crossing, regardless of whether there is a warning device or not.
2. Look and listen: Take the time to look and listen for trains before proceeding across the tracks. Even if you don't see or hear a train, it's still important to exercise caution.
3. Be prepared to stop: Be prepared to come to a complete stop if necessary. If you see a train approaching, do not try to beat it across the tracks.
4. Obey signs and signals: Follow any posted signs or signals that indicate the speed limit or provide other warnings about the crossing.
5. Yield to trains: Remember that trains always have the right of way. If a train is approaching, yield to it and wait until it has passed before proceeding.
In general, it's important to approach all railroad crossings with caution, even if there are no warning devices present.
The exact speed limit may vary depending on the location and circumstances, so it's always best to exercise caution and be prepared to stop if necessary.
To know more about speed limit refer here
https://brainly.com/question/29632218#
#SPJ11
hydroelectric power plants is a clean energy source. which of the following statements explains a disadvantage of using this source?
Hydroelectric power plants can cause harm to the environment and local ecosystems, especially when dams are built to create reservoirs.
While hydroelectric power is considered a clean energy source because it doesn't produce harmful emissions or pollutants, it does have negative environmental impacts. The construction of dams and reservoirs can cause significant damage to natural habitats, disrupt water flow, and alter the ecology of local rivers and streams.
This can have a detrimental effect on fish populations, migratory patterns, and even erosion of riverbanks. Additionally, the building of dams and reservoirs can lead to the displacement of communities and the loss of cultural heritage sites. The reliance on hydroelectric power can also be affected by climate change as reduced rainfall can lead to lower water levels in reservoirs, impacting the amount of electricity that can be generated.
To know more about the Hydroelectric, here
https://brainly.com/question/2433706
#SPJ1
A uniform, 6 m long and 600-N beam, rests on two supports, as shown. The force exerted onthe b eam by the right support B is closest to:
The force exerted on the beam by the right support B is closest to: (B).320N is correct option.
If the beam is at rest, the sum of the forces and the sum of the torques acting on it must be equal to zero.
Assuming the beam is supported at its two ends, the sum of the forces acting on the beam will be equal to the weight of the beam, which is given by:
W = m * g
W = (600 N) / (9.81 m/s²) ≈ 61.14 kg
Each support will exert an equal and opposite force on the beam, which we can denote as F. Therefore, the sum of the forces acting on the beam will be:
ΣF = 2F - W = 0
Solving for F, we get:
F = W/2
F ≈ 30.57 kg ≈ 300 N
Therefore, the force exerted on the beam by the right support B is closest to 300 N.
The complete question is,
A uniform 400-N beam 6 m long rests on two supports. Support Ais im from the left end of the beam Support B is at the right end of the beam. What is the value in N. of support force exerted on the beam by the left support A? 400 0 320 240 O 160
To know more about beam
https://brainly.com/question/29825179
#SPJ1
Why are meteorologists’ weather predictions sometimes wrong?.
Meteorologists' weather predictions can sometimes be wrong..
Due to the complexity and variability of weather systems. Weather is influenced by many factors, such as temperature, pressure, humidity, and , which interact in complicated ways. Additionally, small changes in initial conditions or slight variations in the way weather patterns evolve can have significant effects on the final outcome.
While weather models and forecasting techniques have improved over time, there are still limitations and uncertainties in the data and models used to make predictions. Finally, unexpected events or phenomena, such as rapid changes in weather patterns or extreme weather events, can also make predictions difficult or inaccurate.
To know more about temperature refer here
https://brainly.com/question/15267055#
#SPJ11
Using a cable with a tension of 1350 n, a tow truck pulls a car 5.00 km along a horizontal roadway. (a) how much work does the cable do on the car if it pulls horizontally
The work done by the cable on the car is 67500 J.
To calculate the work done by the cable on the car, we need to use the formula for work, which is:
W = F * d
here W is the work done, So, F is the force applied, and here d is the displacement of the object being moved.
In this case, the force applied by the cable is given by the tension in the cable, which is 1350 N. The displacement of the car is given by the distance it is pulled along the roadway, which is 5.00 km.
We can use the formula for distance to calculate this displacement, which is:
d = 5.00 km
Substituting this value into the formula for work, we get:
W = 1350 N * 5.00 km
W = 67500 J
Therefore, the work done by the cable on the car is 67500 J.
Learn more about work Visit: brainly.com/question/25573309
#SPJ4
A uniform disk of radius 0.455 m0.455 m and unknown mass is constrained to rotate about a perpendicular axis through its center. a ring with the same mass as the disk is attached around the disk's rim. a tangential force of 0.227 n0.227 n applied at the rim causes an angular acceleration of 0.109 rad/s2.0.109 rad/s2. find the mass of the disk.
The mass of the disk is 1.90 kg.We can start by using the formula for torque, which relates torque to angular acceleration and moment of inertia:
τ = Iα
where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
Since the disk is rotating about a perpendicular axis through its center, its moment of inertia can be calculated as:
I_disk = (1/2)MR^2
where M is the mass of the disk and R is its radius.
Similarly, the moment of inertia of the ring can be calculated as:
I_ring = MR^2
where M is the mass of the ring and R is its radius (which is the same as the radius of the disk).
Since the disk and ring have the same mass, we can add their moments of inertia to get the total moment of inertia:
I_total = I_disk + I_ring = (1/2)MR^2 + MR^2 = (3/2)MR^2
Now we can use the given values of torque and angular acceleration to solve for the mass of the disk:
τ = (1/2)MR^2α
0.227 N-m = (1/2)M(0.455 m)^2(0.109 rad/s^2)
Solving for M, we get:
M = 0.227 N-m / [(1/2)(0.455 m)^2(0.109 rad/s^2)] = 1.90 kg
Therefore, the mass of the disk is 1.90 kg.
To know more about the mass of inertia click here:
https://brainly.com/question/12095689
#SPJ11
What is the total amount of power delivered to the heater when the heater is connected for 240-volt operation when each heater is 300 watts?
The total amount of power delivered to the heater when each heater is 300 watts and the heater is connected for 240-volt operation is 300 watts.
To calculate the total amount of power delivered to the heater when each heater is 300 watts and the heater is connected for 240-volt operation, we can use the formula:
P = V * I
where P is power, V is voltage, and I is current.
For a 240-volt operation, we can calculate the current using Ohm's law:
V = I * R
where R is the resistance of the heater.
R can be calculated using the formula:
[tex]R = V^2 / P[/tex]
where P is the power of the heater (in watts).
Substituting the given values, we get:
R = [tex]240^2 / 300[/tex] = 192 Ω
Now, we can calculate the current:
I = V / R = 240 / 192 = 1.25 A
Finally, we can calculate the total power delivered to the heater:
P = V * I = 240 * 1.25 = 300 watts
To know more about power refer here
https://brainly.com/question/29575208#
#SPJ11
Explain how brownian motion provides evdience that air is made of small particles
A coil with 20 turns of wire is wrapped around a tube with a cross-sectional area of 1. 0 m2. A magnetic field
is applied at a right angle at 0. 50 T. If the coil is pulled out of the magnetic field in 5 seconds, what emf is
induced in the coil?
The emf induced in the coil is 2.0 volts.
To calculate the emf induced in the coil with 20 turns of wire, wrapped around a tube with a cross-sectional area of 1.0 m², and a magnetic field applied at a right angle at 0.50 T, when it is pulled out of the magnetic field in 5 seconds, we can use Faraday's Law of Electromagnetic Induction.
The formula for Faraday's Law is:
emf = -N * (ΔΦ/Δt)
where
emf is the induced electromotive force,
N is the number of turns in the coil (20),
ΔΦ is the change in magnetic flux, and
Δt is the time it takes to change the flux (5 seconds).
First, we need to calculate the change in magnetic flux (ΔΦ). Since the coil is completely pulled out of the magnetic field, the final magnetic flux will be zero.
The initial magnetic flux (Φ_initial) can be calculated using the formula:
Φ_initial = B * A
where
B is the magnetic field strength (0.50 T) and
A is the cross-sectional area of the tube (1.0 m²).
Φ_initial = 0.50 T * 1.0 m²
= 0.50 Wb (Weber)
Now, we can calculate the change in magnetic flux (ΔΦ):
ΔΦ = Φ_final - Φ_initial
= 0 Wb - 0.50 Wb
= -0.50 Wb
Next, we can plug the values into Faraday's Law formula:
emf = -20 * (-0.50 Wb / 5 s)
= 20 * (0.10 V)
= 2.0 V
So, the emf induced in the coil is 2.0 volts.
To know more about emf induced refer here
https://brainly.com/question/16764848#
#SPJ11
Armatures are wound to provide high voltage, high current, or some specific combination of voltage and current. which type of winding provides moderate voltage and moderate current
The type of winding that provides moderate voltage and moderate current is called "lap winding." A lap winding connects each armature conductor to the adjacent conductor in a path that runs parallel to the field poles, resulting in multiple parallel paths and a moderate voltage output.
Lap windings are commonly used in direct current (DC) motors and generators, as they provide a balance between high voltage and high current, making them suitable for a range of applications.
The winding is constructed by arranging the armature conductors in concentric circles around the armature core, and then connecting the conductors end-to-end in a continuous loop.
In a lap winding, the number of parallel paths is equal to the number of field poles. This means that a four-pole motor or generator will have four parallel paths, while a six-pole machine will have six parallel paths. The number of parallel paths determines the output voltage and current of the machine, with more parallel paths producing higher output.
In summary, lap winding is a type of armature winding that provides moderate voltage and moderate current, making it suitable for a range of applications. It is constructed by connecting armature conductors in a continuous loop in multiple parallel paths that produce a balanced output.
To know more about lap winding refer here:
https://brainly.com/question/28227580#
#SPJ11
A storage tank contains petrol to a height of 4. 7m. If the pressure at the base of the tank is "32. 3" kPa, determine the density of the petrol. Take the acceleration due to gravity to be 9. 81ms^-2.
The density of the petrol in the storage tank is approximately: 703 kg/m³.
To determine the density of the petrol in a storage tank with a height of 4.7m and a pressure at the base of 32.3 kPa, we can use the following formula:
Pressure = Density × Gravity × Height
Where Pressure is given as 32.3 kPa, Gravity is 9.81 m/s² (as provided), and Height is 4.7m. To find the density, we can rearrange the formula as follows:
Density = Pressure / (Gravity × Height)
Now, we can plug in the values:
Density = 32,300 Pa / (9.81 m/s² × 4.7m)
Density ≈ 703 kg/m³
Therefore, the density of the petrol in the storage tank is approximately 703 kg/m³.
To know more about density, refer here:
https://brainly.com/question/28929608#
#SPJ11
Complete question:
A storage tank contains petrol to a height of 4. 7m. If the pressure at the base of the tank is "32. 3" kPa, determine the density of the petrol. Take the acceleration due to gravity to be 9. 81ms⁻².
calculate the wavelengths of the components of the first line of the lyman series, taking the fine structure of the 2p level into account.
The wavelengths of the components of the first line of the Lyman series, taking the fine structure of the 2p level into account, are 121.4 nm and 121.2 nm for j = 1/2 and j = 3/2, respectively.
The Lyman series is a series of spectral lines in the hydrogen atom's emission spectrum that corresponds to transitions from higher energy levels to the ground state. The first line of the Lyman series corresponds to a transition from the 2p energy level to the 1s energy level.
To take the fine structure of the 2p level into account, we need to use the formula for the energy of a hydrogen atom with fine structure:
[tex]E= -13.6 eV*\frac{1}{n^{2} } *[1+a^{2} * \frac{(\frac{Z}{n}) ^{4}}{(n-j-\frac{1}{2})^{2} } ][/tex]
where n is the principal quantum number, Z is the atomic number (1 for hydrogen), j is the total angular momentum quantum number of the electron, and α is the fine structure constant.
For the 2p energy level, j can be either 1/2 or 3/2, so we need to calculate the wavelengths for both possibilities. Using the formula for the energy of the 2p level and the energy of the 1s level (-13.6 eV), we can calculate the wavelengths of the first line of the Lyman series with fine structure for each case:
For j = 1/2: λ = 121.6 nm * [1 - (1/9) * α²] = 121.6 nm * 0.9988 = 121.4 nm
For j = 3/2: λ = 121.6 nm * [1 - (4/9) * α²] = 121.6 nm * 0.9972 = 121.2 nm
Taking the fine structure of the 2p level into consideration, the wavelengths of the components of the first line of the Lyman series are 121.4 nm and 121.2 nm for j = 1/2 and j = 3/2, respectively.
To know more about the Lyman series, here
https://brainly.com/question/29597178
#SPJ4
how is loudness different from intensity
Intensity is the amount of sound energy per unit area while loudness is a subjective perception of the strength or amplitude of a sound.
Loudness vs intensity of soundLoudness and intensity are both measures of sound, but they are not the same thing.
Intensity refers to the amount of sound energy per unit area and is typically measured in decibels (dB).
Loudness, on the other hand, is a subjective perception of the strength or amplitude of a sound. It is influenced not only by the intensity of the sound but also by factors such as the frequency, duration, and context of the sound.
In general, higher intensity sounds will be perceived as louder, but this relationship is not always straightforward, and individual differences can also play a role in perceived loudness.
More on loudness and intensity can be found here: https://brainly.com/question/11679416
#SPJ1
A beam of light travels from air into a transparent material. The angle of incidence is 24 ∘ and the angle of refraction is 17 ∘
Using this equation, the refractive index of a material with an angle of incidence of 24∘ and an angle of refraction of 17∘ was found to be approximately 1.33, consistent with common transparent materials.
When a beam of light passes from one medium into another, its direction changes due to the change in the speed of light in the different media. This phenomenon is known as refraction. The angle of incidence is the angle between the incident ray and the normal to the surface at the point of incidence, and the angle of refraction is the angle between the refracted ray and the normal.
The relationship between the angles of incidence and refraction is given by Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the speeds of light in the two media. Mathematically,
[tex]$\frac{\sin{\theta_1}}{\sin{\theta_2}}=\frac{v_1}{v_2}$[/tex]
where [tex]"\theta_2"[/tex] is the angle of incidence, [tex]"\theta_2"[/tex] is the angle of refraction, [tex]v_1[/tex] is the speed of light in the incident medium (in this case, air), and [tex]v_2[/tex] is the speed of light in the transparent material.
Assuming that the transparent material has a higher refractive index than air, we know that the angle of refraction will be smaller than the angle of incidence. In this case, we are given that [tex]"\theta_1"[/tex] = 24∘ and [tex]"\theta_2"[/tex] = 17∘. We can use Snell's law to find the refractive index of the transparent material.
First, we need to know the speed of light in the air and the speed of light in the transparent material. The speed of light in air is approximately [tex]$3 \times 10^8 \text{ m/s}$[/tex], and the speed of light in the transparent material depends on its refractive index. Let's denote the refractive index of the material by n. Then, we have:
[tex]$\frac{\sin{24^\circ}}{\sin{17^\circ}}=\frac{3 \times 10^8 \text{ m/s}}{v_2}$[/tex]
Solving for [tex]v_2[/tex], we get:
[tex]$v_2 = (3 \times 10^8 \text{ m/s}) \times \frac{\sin{17^\circ}}{\sin{24^\circ}} \approx 2.26 \times 10^8 \text{ m/s}$[/tex]
Next, we can use the relationship between the speed of light and the refractive index to find n:
[tex]$n = \frac{c}{v_2}$[/tex]
where c is the speed of light in a vacuum
Thus,
[tex]$n = \frac{3 \times 10^8 \text{ m/s}}{2.26 \times 10^8 \text{ m/s}} \approx 1.33$[/tex]
This value of the refractive index is close to that of common transparent materials like water and glass.
In summary, when a beam of light travels from air into a transparent material at an angle of incidence of 24∘ and an angle of refraction of 17∘, the refractive index of the material can be found using Snell's law and the relationship between the speed of light and the refractive index. The calculated value of the refractive index is approximately 1.33, which is consistent with that of common transparent materials.
To learn more about refractive index
https://brainly.com/question/30761100
#SPJ4
A small plate has moved away from a large plate. It has moved150,000 meters in 30 million years. It is moving eastward.
1. What is the rate of motion of the small plate? Express your answer in mm/year.
2. Where would the plate be after 1. 5 million years? Express your answer in m
The small plate is moving eastward at a rate of 5 millimeters per year. After 1.5 million years, the small plate would be 7,500 meters farther away from the large plate.
To find the rate of motion of the small plate, we can divide the distance it moved by the time it took to move that distance:
Rate of motion = distance/time
In this case, the distance is 150,000 meters and the time is 30 million years, which is equivalent to 30,000,000 years. Converting both values to millimeters and years, respectively, we get:
Rate of motion = (150,000 meters) / (30,000,000 years) * (1000 mm/meter) / (1 year/1)
Simplifying this expression, we get:
Rate of motion = 5 mm/year
To find where the small plate would be after 1.5 million years, we can use the formula:
distance = rate of motion * time
Using the rate of motion we calculated in part 1 (5 mm/year) and the given time of 1.5 million years, we get:
distance = (5 mm/year) * (1.5 million years)
Converting the result back to meters, we get:
distance = 7,500 meters
To know more about plate, here
brainly.com/question/16941906
#SPJ4
45 N
15 N
Net Force:
Is it balanced or unbalanced?
net force: 60( not sure)
I would say it's unbalanced because these forces are not of the same magnitude.
Fill in the blanks please!
Genes are the basic units of heredity. (Los genes son las unidades básicas de la herencia.)
What are genes and what do they do?A short stretch of ADN called a gene. The body's genes instruct it on how to produce particular proteins. About 20,000 genes are found in each human body cell. Together, they make up the genetic makeup of the human body and determine how it functions.
Fundamental unit of the inheritance from parents to children. The genes are constructed from ADN sequences and are arranged one after the other in certain locations within the chromosomal nuclei of cells.
To know more about ADN visit:-
https://brainly.com/question/30297148
#SPJ1
lighting flashes and you hear a thunder clap 4 seconds later. the velocity of sound is 340 m/s. how far away did the lighting strike
Answer:
The lightning struck 1,360 meters away
Explanation:
1. List knowns
Speed of sound = 340 m/s
Time = 4 s
2. Find formula that uses above knowns
Speed = Distance / Time
Distance = Time x Speed
3. Substitute
Distance = 4 s x 340 m/s
Distance = 1360 meters
Write an equation for the strength of the electrostatic force for two charges that are separated by 10 meters. Use the Gizmo to check your equation
F = k * ([tex]q_1[/tex][tex]q_2[/tex])/[tex]r^{2}[/tex], where F is the strength of the electrostatic force, k is Coulomb's constant (9X[tex]10^{9}[/tex] N*[tex]m^{2}[/tex]/[tex]C^{2}[/tex]), [tex]q_1[/tex] and [tex]q_2[/tex] are the charges, and r is the distance between the charges in meters.
What is Magnetic Force?
Magnetic force is a fundamental force of nature that is exerted between moving charged particles, such as electrons or between a magnetic field and a moving charge. This force can cause a magnetic material to experience a force of attraction or repulsion depending on its orientation with respect to the magnetic field.
Using the Gizmo to check, we can input two charges and a distance of 10 meters to calculate the electrostatic force between them. The result should match the output of the equation F = k * ([tex]q_1[/tex]*[tex]q_2[/tex])/[tex]r^{2}[/tex].
To learn more about Magnetic Force, visit;
https://brainly.com/question/14411049
#SPJ4
the sun is a star in the milky way galaxy. when viewed from the side, the galaxy looks like a disk that is approximately 100,000 light- years in diameter (a light-year is the distance light travels in one year) and about 1000 light-years thick (figure p25.8). what is the diameter and thickness of the milky way in meters? in kilometers? in miles?
Answer:
1,000,000,000,000,000,000 km (about 100,000 light years or about 30 kpc)
Explanation:
A football player is running down the field with a momentum of 0. 567 kg*m/s. The player encounters a force that causes him to stop in 1. 4 seconds.
What is the final momentum of the player?
kg*m/s
What is the change in momentum of the player?
kg*m/s
What is the impulse?
N*s
What is magnitude of the force that brings the player to a stop in this amount of time?
The final momentum of the player is 0 kgm/s, the change in momentum is -0.567 kgm/s, the impulse is -0.567 N*s, and the magnitude of the force that brings the player to a stop in 1.4 seconds is 0.405 N.
We can use the equation for impulse, which is given by:
[tex]impulse = force * time[/tex]
We can also use the equation for change in momentum, which is given by:
change in momentum = final momentum - initial momentum
First, let's find the final momentum of the player. We know that the initial momentum is 0.567 kgm/s, and the player comes to a stop, so the final momentum is 0 kgm/s.
Therefore, the change in momentum is:
change in momentum = final momentum - initial momentum = 0 - 0.567 = -0.567 kg*m/s
The negative sign indicates that the momentum has decreased.
Now, let's find the impulse. We know that the time it takes for the player to come to a stop is 1.4 seconds, so we can plug that into the equation for impulse:
impulse = force x time
-0.567 kg*m/s = force x 1.4 s
Solving for force, we get:
force = -0.567 kg*m/s ÷ 1.4 s = -0.405 N
The negative sign indicates that the force is acting in the opposite direction of the player's momentum.
To know more about impulse refer here
https://brainly.com/question/30466819#
#SPJ11
A spring gun with a spring constant of 250N/m is compressed 5. Ocm. How fast
will a 0. 025kg dart move when it leaves the gun?
0. 13 m/s
0. 50 m/s
1. 5 m/s
5. 0 m/s
The dart will move at velocity approximately 5.0 m/s when it leaves the gun.
To calculate the speed of the dart, we can use the conservation of energy principle. When the spring is compressed, it has potential energy, which is converted into the kinetic energy of the dart when it is released. The potential energy of the compressed spring can be calculated using the formula: PE = 0.5 * k * x^2, where PE is the potential energy, k is the spring constant (250 N/m), and x is the compression distance (0.05 m).
PE = 0.5 * 250 * (0.05)^2 = 0.3125 J (joules)
Now, we can use the kinetic energy formula to find the speed of the dart: KE = 0.5 * m * v^2, where KE is the kinetic energy, m is the mass of the dart (0.025 kg), and v is the speed. We can rearrange this formula to solve for v:
v = sqrt((2 * KE) / m)
Plugging in the values, we get:
v = sqrt((2 * 0.3125) / 0.025) ≈ 5.0 m/s
Therefore, the speed of the dart when it leaves the gun is approximately 5.0 m/s.
Know more about potential energy of the compressed spring click here:
https://brainly.com/question/14577144
#SPJ11
Read the following passage and find the two errors. Then, choose the answer that corrects the errors. pH is a measure of the concentration of OH− ions in a solution of an acid or base. The pH scale plots the concentration of solutions in a range from 0–16. (2 points) Group of answer choices pH is a measure of the concentration of OH− ions in a solution of water. The pH scale plots the concentration of solutions in a range from 0–12. pH is a measure of the concentration of H+ ions in a solution of an acid or base. The basic scale plots the concentration of solutions in a range from 0–16. pH is a measure of the concentration of OH− ions in a solution of an acid or base. The acid scale plots the concentration of solutions in a range from 0–16. pH is a measure of the concentration of H+ ions in a solution of an acid or base. The pH plots the concentration of solutions in a range from 0–14.
The two errors in the passage are:
pH is a measure of the concentration of OH− ions in a solution of an acid or base. The pH scale plots the concentration of solutions in a range from 0–16.
The answer that correct both errors is:
pH is a measure of the concentration of H+ ions in a solution of an acid or base. The pH plots the concentration of solutions in a range from 0–14.
A solution's acidity or basicity is determined using the pH scale. A pH of 0-6.9 is considered acidic, a pH of 7 is neutral, and a pH of 7.1-14 is considered basic. The pH scale is logarithmic, which means that each change in pH reflects a tenfold difference in acidity or basicity.
The concentration of hydrogen ions (H+) in a solution determines the pH of the solution. A base is a chemical that reduces the concentration of H+ ions in a solution, whereas an acid raises the concentration of H+ ions in a solution.
Therefore, The correct answer choice is:
" pH is a measure of the concentration of H+ ions in a solution of an acid or base. The pH plots the concentration of solutions in a range from 0–14."
For more such questions on pH scale, click on:
https://brainly.com/question/14965267
#SPJ11
2. 2 "However, we need to examine our environment, and ask problematic questions such as,
"whose law?" Obviously, it's the law of the dominant class in that society (Study Guide,
p. 7)
Which class does the South African law, including the constitution, serve? Explain fully. (3)
The law in South Africa, including the constitution, serves the interests of the dominant class, which historically has been the white minority. During apartheid, the law was used to enforce segregation and discrimination against the majority black population.
While the constitution and laws have since been revised to promote equality and protect human rights, there are still systemic issues that continue to serve the interests of the wealthy and powerful.
For example, land ownership remains highly concentrated in the hands of a few, and the legal system can be slow and expensive, making it difficult for marginalized communities to access justice. Additionally, the legacy of apartheid-era policies and practices continues to impact access to education, healthcare, and economic opportunities for many black South Africans.
Overall, while progress has been made in addressing inequality and promoting social justice, the law in South Africa still reflects the interests of the dominant class and requires continued efforts to ensure that it serves the needs of all citizens.
Know more about human rights here:
https://brainly.com/question/3444313
#SPJ11