The force of __________ will be greater if one object has a larger mass than the other

Hubble concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.

In 1929, Edwin Hubble published his first paper on the relationship between redshift and distance. He tentatively concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.

This relationship is known as the Hubble relation. If you graph this relation, the slope of the line is the Hubble constant or a measure of the expansion rate of the universe.

More on Hubble's relation can be found here: https://brainly.com/question/29752713

#SPJ1

The dielectric constant of the material is 3.38.

The capacitance of a parallel-plate capacitor with air between its plates is given by:

C = ε0 A / d, where ε0 is the permittivity of free space, A is the area of the plates, and d is the distance between the plates.

When a dielectric is inserted between the plates, the capacitance increases according to:

C' = k ε0 A / d, where k is the dielectric constant of the material.

From the given information, we can use the equation:

C' = V / Q, where V is the potential difference across the plates and Q is the charge on the plates. Initially, when there is air between the plates, the potential difference is 51.0 V. When the dielectric is inserted, the potential difference drops to 12.1 V, but the charge on the plates remains the same.

Therefore, we can write:

C' = V / Q = 12.1 V / Q = k (51.0 V / Q) = 51.0 k / C,

where C is the initial capacitance (with air between the plates).

Solving for k, we get:

k = C' / C = (12.1 V / Q) / (51.0 V / Q) = 0.2373.

Using the equation for the capacitance with a dielectric, we can also write:

C' = k ε0 A / d,

which gives us:

k = C' d / (ε0 A) = 3.38.

As a result, the material's dielectric constant is 3.38.

To know more about the Parallel Plate Capacitor, here

https://brainly.com/question/24213844

#SPJ4

The period of the electromagnetic wave is 5×10⁻¹⁰ seconds

Period is the time taken for a wave to complete one rotation.

To calculate the period of the wave, we use the formula below.

Formula:

Where:

From the question,

Given:

substitute these values equation 1

Learn  more about period here: https://brainly.com/question/29813582

#SPJ1

An object with a mass of 4kg, lying on a rough table, experiences a frictional force of 15N and a horizontal force of 25N, resulting in a net force of 10N, causing the object to accelerate to the right with an acceleration of 2.5 m/s².

Normal force Frictional force (15N)

The normal force points upwards and is equal in magnitude to the weight of the object (mg = 4kg * 9.81m/s² = 39.24N) since the object is not accelerating in the vertical direction.

The frictional force points to the left and is equal in magnitude to the force applied to the object (15N = 25N), indicating that the object is not moving horizontally.

The resultant force is found by subtracting the frictional force from the applied force:

F_net = F_applied - F_friction = 25N - 15N = 10N

The object will accelerate to the right with an acceleration of:

a = F_net/m = 10N/4kg = 2.5 m/s²

Therefore, the object will move to the right with increasing speed.

Learn more about  Frictional force here:

https://brainly.com/question/4618599

#SPJ1

The ultraviolet catastrophe is good evidence for the (B).wave nature of quanta is correct option.

The ultraviolet catastrophe was a problem in classical physics that arose when attempting to explain the spectral distribution of blackbody radiation. According to classical physics, the energy of radiation should increase without limit as the frequency of the radiation increases. However, experiments showed that this was not the case, and there was a maximum frequency beyond which the energy decreased.

This problem was resolved by Max Planck in 1900, who proposed that energy is quantized and can only exist in discrete packets or "quanta". This led to the development of quantum mechanics, which describes the behavior of matter and energy at the atomic and subatomic level.

The wave-particle duality is a fundamental concept in quantum mechanics that describes the dual nature of particles, which can exhibit both wave-like and particle-like behavior depending on the experimental setup. However, the ultraviolet catastrophe is specifically related to the wave nature of quanta, as it was the wave-like behavior of energy that led to the resolution of the problem.

To know more about wave nature

https://brainly.com/question/27077956

#SPJ4

The mechanical energy of the system decreases by 12% (152.70 J/751.98 J x 100%) when the ball reaches its destination. Therefore, the correct answer is C. Decreases by 12%.

What is Energy?

Energy is a fundamental physical quantity that describes the ability of a system to do work. In other words, energy is the capacity of a system to produce changes in itself or in its environment. It is a scalar quantity, which means that it is characterized only by its magnitude and not by its direction.

When the ball reaches the bottom of the incline, it will have a velocity v given by v = [tex]\sqrt{2gh}[/tex], where h is the height of the incline. Substituting the values, we get v = [tex]\sqrt{29.817.66}[/tex] = 10.99 m/s.

The final kinetic energy of the ball is given by (1/2)m[tex]v^{2}[/tex] = (1/2)[tex]1010.99^{2}[/tex] = 599.28 J.

The final potential energy of the ball is 0, since it is at ground level. Therefore, the total mechanical energy of the system at the bottom of the incline is the sum of the final kinetic and potential energies, which is 599.28 J.

The initial mechanical energy of the system is the potential energy of the ball at the top of the incline, which is 751.98 J.

Therefore, the change in mechanical energy is:

Delta E = 599.28 - 751.98 = -152.70 J

To know more about Energy visit;

https://brainly.com/question/8101588

#SPJ4

The negative sign indicates that the velocity of the launcher is in the opposite direction of the tennis ball's velocity (south). After calculating the value, you will find the velocity of the 20 kg tennis ball launcher.

To determine the velocity of the tennis ball launcher, we can apply the law of conservation of momentum. This law states that the total momentum before an event is equal to the total momentum after the event, provided no external forces are acting on the system.

Before the launch, both the 20 kg tennis ball launcher and the 0.057 kg tennis ball are at rest, so the total initial momentum is zero. After the launch, the tennis ball has a velocity of 36 m/s to the north. We can find the final momentum of the launcher using the equation:

initial momentum = final momentum
0 = (mass of tennis ball)(velocity of tennis ball) + (mass of launcher)(velocity of launcher)

Substitute the given values:
0 = (0.057 kg)(36 m/s) + (20 kg)(velocity of launcher)

Solve for the velocity of the launcher:
velocity of launcher = -(0.057 kg * 36 m/s) / 20 kg

The negative sign indicates that the velocity of the launcher is in the opposite direction of the tennis ball's velocity (south). After calculating the value, you will find the velocity of the 20 kg tennis ball launcher.

To know more about velocity, refer here:

https://brainly.com/question/1482529#

#SPJ11

Chico, California, is a diverse ecosystem that includes both physical and biological components. Various factors can disrupt these components and impact the overall ecosystem.

1. Physical Component Disruptions:

a. Climate Change: Climate change can alter temperature and precipitation patterns, leading to changes in the availability of water resources, extended drought periods, increased frequency of extreme weather events, and shifts in seasonal patterns. These changes can disrupt the physical environment, affecting habitats, water availability, and overall ecosystem dynamics.

b. Land Use Changes: Human activities such as urbanization, deforestation, and agriculture can lead to habitat loss, fragmentation, and degradation. These changes in land use can disrupt natural habitats, limit food sources, and alter the physical structure of the ecosystem.

c. Pollution: Pollution from various sources, including industrial activities, agriculture, and urban runoff, can introduce harmful substances into the ecosystem. This pollution can impact water quality, soil health, and air quality, affecting both physical components and the organisms that rely on them.

2. Biological Component Disruptions:

a. Invasive Species: The introduction of non-native species can disrupt the balance of the ecosystem. Invasive species can outcompete native species for resources, prey upon native species, alter habitats, and disrupt ecological interactions. This can lead to a decline in native biodiversity and changes in ecosystem functioning.

b. Habitat Loss and Fragmentation: Destruction and fragmentation of habitats due to human activities can lead to the loss of crucial habitats for various species. This loss can result in reduced biodiversity, decreased populations of native species, and disruptions in ecological relationships.

c. Overexploitation: Unsustainable harvesting or hunting of species can lead to population declines and even extinction. Overfishing, overhunting, and excessive removal of plant species can disrupt food chains, alter ecological dynamics, and impact the overall health of the ecosystem.

d. Disease Outbreaks: Disease outbreaks can impact the population dynamics of species within an ecosystem. Pathogens or parasites can spread among organisms, causing declines in populations or altering the interactions between species.

These disruptions to both the physical and biological components of the ecosystem in Chico, California, can have cascading effects on the overall ecosystem health, leading to changes in species composition, food web dynamics, nutrient cycling, and ecosystem services. It is important to understand and address these disruptions to ensure the long-term sustainability and resilience of the ecosystem.

To know more about ecosystem refer here

https://brainly.com/question/31459119#

#SPJ11

As for the Voltage across the inductor, it is equal to zero after four time constants because the current in the circuit has decreased to zero. Therefore, the correct answer for part (b) is zero, not 0.107.

When the switch is in position 1, the circuit is closed and the battery is connected in series with the inductor and resistor. This means that current flows through the circuit, causing a magnetic field to be generated by the inductor. However, when the switch is suddenly moved to position 2, the circuit is opened and the battery is no longer connected.

After the switch is moved, the current in the circuit begins to decrease due to the inductor's opposition to changes in current. The time it takes for the current to decrease to 36.8% of its original value is known as the time constant, which is calculated by dividing the inductance of the inductor by the resistance of the resistor.

After four time constants, the voltage across the resistor can be calculated using the equation V = V0 * e^(-t/RC), where V0 is the initial voltage, t is the time elapsed, R is the resistance, and C is the capacitance. Plugging in the values given, we get V = 193 * e^(-4/RC) = 3.53 volts.

As for the voltage across the inductor, it is equal to zero after four time constants because the current in the circuit has decreased to zero. Therefore, the correct answer for part (b) is zero, not 0.107.

To Learn More About Voltage

https://brainly.com/question/1176850

SPJ11

The car will travel a distance of 180 meters in 12 seconds.

To determine the distance traveled by the car, we can use the equation of motion:

Distance (d) = Initial velocity (v₀) × time (t) + 0.5 × acceleration (a) × time squared (t²)

Given:

Initial velocity (v₀) = 0 m/s (starting from rest)

Acceleration (a) = 2.5 m/s²

Time (t) = 12 seconds

Plugging in the values into the equation:

Distance (d) = 0 × 12 + 0.5 × 2.5 × 12²

Distance (d) = 0 + 0.5 × 2.5 × 144

Distance (d) = 0 + 0.5 × 2.5 × 144

Distance (d) = 180 meters

To know more about equation of motion refer here

https://brainly.com/question/14355103#

#SPJ11

Answer:We can use the kinematic equations of motion to solve this problem. The equation we need to use is:

v^2 = u^2 + 2as

where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (which is -9.81 m/s^2), and s is the displacement.

Initially, the ball is thrown straight down with an initial speed of 4.30 m/s and a height of 8.80 m. Let's take the upward direction as positive. Using the equation of motion for displacement, we can find the time it takes for the ball to reach a height of 5.80 m:

s = ut + (1/2)at^2

-3 = 4.3t + (1/2)(-9.81)t^2

-4.905t^2 + 4.3t - 3 = 0

Using the quadratic formula, we find that the time it takes for the ball to reach a height of 5.80 m is t = 0.956 s (rounded to three significant figures).

Now, we can use the equation of motion for velocity to find the velocity of the ball at this point:

v^2 = u^2 + 2as

v^2 = (4.3 m/s)^2 + 2(-9.81 m/s^2)(-3 m)

v = -5.08 m/s

The negative sign indicates that the velocity is in the downward direction. Therefore, the velocity of the ball when it reaches a height of 5.80 m is 5.08 m/s downward.

Explanation:

The best way for someone to identify a suitable career is a subjective matter and can vary from person to person. However, a common approach involves a combination of self-reflection, exploration, and research. Some recommended steps to identify a suitable career include:

1. Self-reflection: Brainstorm a list of things you enjoy doing and are passionate about. Consider your interests, hobbies, skills, and values. Think about what brings you satisfaction and a sense of fulfillment.

2. Skills assessment: Identify your strengths and areas where you excel. Assess your natural abilities, talents, and acquired skills. Determine what tasks or activities you perform well and enjoy doing.

3. Exploration and research: Explore different career options that align with your interests and skills. Research various industries, job roles, and career paths. Gather information about job responsibilities, required qualifications, growth prospects, and work-life balance.

4. Gain experience: Seek opportunities to gain hands-on experience in fields or roles you are considering. This can be through internships, part-time jobs, volunteering, or shadowing professionals. Practical experience can help you gain insight into the day-to-day realities of different careers.

5. Networking and informational interviews: Connect with professionals working in fields of interest. Conduct informational interviews to learn more about their career paths, experiences, and advice. Networking can provide valuable insights and potential opportunities.

6. Professional aptitude tests: Consider taking aptitude tests or career assessments that evaluate your strengths, interests, and personality traits. These tests can provide additional guidance and suggestions for suitable career paths. However, remember that they should be used as a tool and not as the sole decision-making factor.

It is important to note that selecting a suitable career is a personal decision, and what works for one person may not work for another. It's essential to consider your individual aspirations, values, and long-term goals when making career choices.

Seek advice from trusted mentors or career counselors who can provide guidance based on your specific circumstances and help you make an informed decision.

To know more about career refer here

https://brainly.com/question/8825832#

#SPJ11

Explanation:

To find the average speed of the train, we can use the formula:

average speed = total distance / total time

To find the total distance, we need to calculate the distance traveled during each segment of the trip:

- Distance traveled at 60 km/h for 0.52 hours = 60 km/h * 0.52 h = 31.2 km

- Distance traveled at 30 km/h for 0.24 hours = 30 km/h * 0.24 h = 7.2 km

- Distance traveled at 70 km/h for 0.71 hours = 70 km/h * 0.71 h = 49.7 km

Total distance = 31.2 km + 7.2 km + 49.7 km = 88.1 km

To find the total time, we simply add up the times for each segment:

Total time = 0.52 h + 0.24 h + 0.71 h = 1.47 hours

Now we can use the formula to find the average speed:

average speed = total distance / total time = 88.1 km / 1.47 h ≈ 59.86 km/h

Therefore, the average speed of the train is approximately 59.86 km/h.

The object is known as a projectile, and its course is known as its trajectory.

A projectile is an object that moves freely under the effects of gravity and air resistance after being pushed by an external force. Although projectiles are any items in motion across space, they are most typically found in warfare and sports.

The curving route that an object takes when thrown is known as projectile motion.

Learn more about projectiles here:

https://brainly.com/question/24216590

#SPJ1

The frequency of the 5th harmonic of a 5 Hz fundamental is 25 Hz.

To find the frequency of the 5th harmonic (h₅) of a 5 Hz fundamental, you need to multiply the fundamental frequency (f₁) by the harmonic number (n). The formula is:

fₙ = n*f₁

where:

fₙ = frequency of the nth harmonic

f₁ = fundamental frequency

n = harmonic number

In this case, the fundamental frequency (f₁) is 5 Hz and the harmonic number (n) is 5. So, the frequency of the 5th harmonic (h₅) would be:

h₅ = 5 * 5

= 25 Hz

To know more about frequency, here

brainly.com/question/5102661

#SPJ4

(a) Pb = 2π * N * T

(b) Pf = mf * CV

(c) Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%

To determine the brake power, fuel power, and brake thermal efficiency, we can use the following formulas:

(a) Brake Power (Pb):

Pb = 2π * N * T

Where N is the shaft speed in revolutions per minute (rpm) and T is the torque.

(b) Fuel Power (Pf):

Pf = mf * CV

Where mf is the fuel consumption rate in kilograms per second and CV is the calorific value of the fuel in joules per kilogram.

(c) Brake Thermal Efficiency (ηb):

ηb = (Pb / Pf) * 100%

Let's calculate these values using the given information:

(a) Brake Power:

Shaft Speed N = 2600 rev/min

Torque arm R = 16 cm = 0.16 m

The torque (T) can be calculated using the formula:

T = F * R

Brake Power (Pb) = 2π * N * T

(b) Fuel Power:

Fuel consumption mf = 2 g/s = 0.002 kg/s

Calorific Value (CV) = 42 MJ/kg = 42 × [tex]10^6[/tex] J/kg

Fuel Power (Pf) = mf * CV

(c) Brake Thermal Efficiency:

Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%

Let's substitute the given values into the equations and calculate the results.

To know more about brake power refer here

https://brainly.com/question/31456389#

#SPJ11

Answer:

According to the only context given, the correct answer is induction.

If the 50-kg crate starts from rest and achieves a velocity of v = 4 m/s when it travels a distance of 5 m to the right. The magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.

To determine the magnitude of force P acting on the crate, we need to use the equations of motion and the concept of friction. The force acting on the crate can be expressed as the sum of the force due to P and the force due to friction.

First, we can calculate the force due to friction, which is given by the formula Ff = μk x Fn, where Fn is the normal force acting on the crate. Fn can be calculated by multiplying the mass of the crate by the acceleration due to gravity (9.8 m/s²):

Fn = m x g

Fn = 50 kg x 9.8 m/s²

Fn = 490 N.

Therefore, Ff = 0.3 x 490 N = 147 N.

Next, we can use the equations of motion to calculate the force due to P. We can use the formula[tex]v^2 = u^2 + 2as[/tex], where u = 0 m/s (since the crate starts from rest), v = 4 m/s, and s = 5 m.

Solving for a, we get [tex]a = 4^2 / (2 \times 5) = 1.6\; m/s^2.[/tex] The force due to P can be calculated using the formula F = ma, where m is the mass of the crate:[tex]F = 50 \;kg \times 1.6\; m/s^2 = 80 N.[/tex]

Finally, we can add the force due to friction and the force due to P to get the total force: Ftotal = Ff + F = 147 N + 80 N = 227 N.

Therefore, the magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.

In summary, to determine the magnitude of force P acting on a crate, we can use the equations of motion and the concept of friction. By calculating the force due to friction and the force due to P, we can add them to get the total force acting on the crate.

To know more about magnitude refer here:

https://brainly.com/question/30827927#

#SPJ11

The speakers in a sports stadium are 89. 5 m from a fan's seat. It takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.

The time it takes for sound to travel from the speakers to the fan's seat can be calculated using the formula

Time = distance / speed

Where distance is the distance between the speakers and the fan's seat, and speed is the speed of sound in air.

In this case, the distance between the speakers and the fan's seat is 89.5 m, and the speed of sound in air is 343 m/s (at standard temperature and pressure).

Plugging in these values into the formula, we get

Time = 89.5 m / 343 m/s

Time = 0.261 seconds

Therefore, it takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.

To know more about time here

https://brainly.com/question/22594054

#SPJ4

The linear frequency that should be selected for the power supply for the circuit to operate at resonance is 2077.9 Hz.

To find the linear frequency that should be selected for the power supply for the circuit to operate at resonance, we can use the formula for resonant frequency of an RLC circuit:

f = 1 / (2π√(L*C))

where f is the resonant frequency, L is the inductance in henries, and C is the capacitance in farads.

In this case, the capacitance is given as 77.7 μF, which is equivalent to 0.0777 F, and the inductance is given as 28.6 mH, which is equivalent to 0.0286 H. The resistance is given as 630.5 Ω.

Substituting these values into the formula, we get:

f = 1 / (2π√(0.0286 H * 0.0777 F)) = 2077.9 Hz

At this frequency, the inductive reactance and the capacitive reactance cancel out, and the impedance of the circuit is purely resistive, resulting in maximum current flow and minimum power loss.

To learn more about frequency click on,

https://brainly.com/question/16991418

#SPJ4

The speed of the 8 kg ball must be 0.83 m/s to the right.

To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of a system of objects is conserved if no external forces act on the system. Before the explosion, the total momentum of the system is zero since both balls are at rest.

After the explosion, the total momentum of the system is still zero, so the momentum of the 5 kg ball to the left must be balanced by the momentum of the 8 kg ball to the right. We can use the formula for momentum, which is momentum = mass x velocity. Let v be the velocity of the 8 kg ball after the explosion.

Then we have

5 kg x (-1.3 m/s) + 8 kg x v = 0

Solving for v, we get:

v = (5 kg x 1.3 m/s) / 8 kg = 0.8125 m/s

Since the velocity is to the right, we get:

v = 0.83 m/s to the right.

To know more about the Speed, here

https://brainly.com/question/31241752

#SPJ4

The index of refraction of the unknown material is 1.5.

The index of refraction (n) of a medium is defined as the ratio of the speed of light in a vacuum (c) to the speed of light in the medium (v):

n = c / v

In this case, the speed of light in the unknown material is given as 2.00 × [tex]10^8[/tex] m/s. The speed of light in a vacuum is approximately 3.00 × [tex]10^8[/tex] m/s. Substituting these values into the formula:

n = (3.00 × [tex]10^8[/tex] m/s) / (2.00 × [tex]10^8[/tex] m/s)

Simplifying the expression:

n = 1.5

To know more about refraction refer here

https://brainly.com/question/14760207#

#SPJ11

If an object is speeding up, the sign of its velocity and acceleration are the same. Option B is correct.

This means that both velocity and acceleration are positive if the object is moving in the positive direction and negative if the object is moving in the negative direction. Acceleration is defined as the rate of change of velocity over time, so if an object is speeding up, its velocity is increasing over time. This increase in velocity can be positive or negative, depending on the direction of motion, but in either case, the acceleration must be in the same direction as the velocity.

Distance and speed are not inversely proportional in this case, as they can both increase or decrease together when an object is speeding up. The magnitude of velocity and acceleration are not always zero, as they can be positive or negative depending on the direction of motion. Option B is correct.

To know more about the Acceleration, here

https://brainly.com/question/30499732

#SPJ4

Charged particles are fundamental to the behavior of electric currents, electric circuits, and resistance. An electric current is the flow of charged particles, typically electrons, through a conductor.

The flow of charged particles generates an electric field that induces a potential difference, or voltage, across the conductor.Electric circuits are constructed by connecting conductors and electrical components, such as resistors, capacitors, and inductors, in a specific configuration. The arrangement of the components determines how the current flows through the circuit.

The flow of current through the circuit depends on the resistance offered by the components in the circuit and the potential difference across the circuit.Resistance is the property of a conductor that opposes the flow of current. The resistance of a conductor is proportional to the number of charged particles in the conductor, the length of the conductor, and the cross-sectional area of the conductor. The resistance can also be affected by the temperature of the conductor and its material properties.

In summary, charged particles are responsible for generating electric currents that flow through electrical circuits. The behavior of the currents is determined by the arrangement of the components in the circuit and the resistance offered by the conductors and components. Resistance is a fundamental property of a conductor that opposes the flow of charged particles and can be affected by various factors.

For more such questions on resistance visit:

https://brainly.com/question/7669692

#SPJ11

The stored energy from all the lightning strikes during the thunderstorm would only be able to supply a city for 0.000675 seconds at the same rate as a large power plant.

The energy delivered by a lightning strike can be calculated using the formula E = VQ, where E is the energy, V is the voltage, and Q is the charge. Therefore, the energy delivered by a lightning strike is:

E = (-75 x 10⁻³V) x (-25 C) = 1.875 J

The total energy delivered by lightning strikes during the thunderstorm can be calculated by multiplying the energy delivered by each strike by the number of strikes, which is 3600/10 = 360.

Therefore, the total energy delivered by lightning strikes during the thunderstorm is:

E_total = 1.875 J/strike x 360 strikes = 675 J

Assuming that all of this energy can be captured and stored, it can supply a city for a certain amount of time. The time that the stored energy can supply the city can be calculated using the formula T = E/P, where T is the time, E is the energy, and P is the power.

Therefore, the time that the stored energy can supply a city is:

T = 675 J / 1,000 MW = 0.000675 s

As a result, the accumulated energy from all of the lightning strikes throughout the thunderstorm could only power a city for 0.000675 seconds at the same rate as a huge power plant.

To know more about the Lightning strike, here

https://brainly.com/question/15242337

#SPJ4

Answer:Assuming the mass of the spring is not changed, the frequency of the mass-spring system will increase if the length of the spring is cut into one third. This is because the frequency of a mass-spring system is inversely proportional to the square root of the length of the spring. Mathematically, the frequency (f) is given by:

f = 1 / (2π) x √(k/m)

where k is the spring constant and m is the mass of the system. Since the mass of the spring is not changing, if the length of the spring is cut into one third, the square root of the length will become √(1/3) = 0.577. Therefore, the frequency of the system will increase by a factor of 1/0.577, which is approximately 1.73 or √3.

Explanation:

When a neutral balloon is rubbed on your hair, the balloon becomes negatively charged because it gains electrons from your hair. The process of triboelectric charging occurs because of the difference in the materials' ability to give up or gain electrons.

When you rub an electrically neutral balloon on your hair, some electrons are transferred from your hair to the surface of the balloon. As a result, the balloon becomes negatively charged, and your hair becomes positively charged.

This is because electrons are negatively charged particles, and when they move from one object to another, the object that loses electrons becomes positively charged, and the object that gains electrons becomes negatively charged.

The process of transferring electrons from one object to another through friction is called triboelectric charging, and it occurs because some materials have a stronger tendency to give up electrons, while others have a stronger tendency to gain electrons.

In summary, when a neutral balloon is rubbed on your hair, the balloon becomes negatively charged because it gains electrons from your hair. The process of triboelectric charging occurs because of the difference in the materials' ability to give up or gain electrons.

To know more about electrons refer here:

https://brainly.com/question/19448078#

#SPJ11

As fluids are transported over a long distance, the fluid pressure in the pipes tends to decrease. This occurs due to several factors, including friction, elevation changes, and pipe diameter variations.

1. Friction: As the fluid flows through the pipes, it encounters resistance from the pipe walls, which is known as friction. This friction causes the fluid to lose energy, resulting in a drop in pressure. The longer the distance, the more friction the fluid experiences, and the greater the pressure loss.

2. Elevation changes: When a fluid flows through pipes with elevation changes, the pressure can vary due to gravity. Fluids flowing uphill experience a decrease in pressure due to the energy required to move against gravity. Conversely, fluids flowing downhill may experience an increase in pressure as gravity aids in the movement.

3. Pipe diameter variations: If the pipe diameter changes along the path, it can also affect the fluid pressure. As the fluid moves from a larger diameter pipe to a smaller one, the flow velocity increases, resulting in a decrease in pressure according to Bernoulli's principle.

In summary, as fluids are transported over long distances, the fluid pressure in the pipes generally decreases due to factors such as friction, elevation changes, and pipe diameter variations. This happens because the fluid loses energy as it overcomes these obstacles during its flow, leading to a reduction in pressure.

To know more about fluids refer here

https://brainly.com/question/21708739#

#SPJ11

The third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.

We can start the problem by using conservation of momentum. The momentum before the impact is zero since the plate is at rest, and the momentum after the impact is the sum of the momenta of the three pieces.

Since there are no horizontal forces during the crash, the total momentum is conserved in the x and y directions separately.

Let's call the velocity of the third piece v and assume it moves at an angle θ relative to the x-axis. Then we can write the following equations:

Initial momentum in x-direction = Final momentum in x-direction

0 = 0.32 kg * 2.00 m/s + 0.355 kg * 0 m/s + 0.1 kg * v cos(θ)

Initial momentum in y-direction = Final momentum in y-direction

0 = 0.32 kg * 0 m/s + 0.355 kg * 1.50 m/s + 0.1 kg * v sin(θ)

Simplifying these equations, we get:

0.64 = 0.1 v cos(θ)

0.535 = 0.1 v sin(θ)

We can divide the second equation by the first equation to get:

tan(θ) = 0.535/0.64 = 0.836

Taking the inverse tangent of both sides, we get:

θ = 39.8°

Therefore, the third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.

To know more about momentum refer here

https://brainly.com/question/29220242#

#SPJ11