The electron gun in an old CRT television accelerates electrons between two charged parallel plates (the cathode is negative; the anode is positive) 1.2 cm apart. The potential difference between them is 25 kV. Electrons enter through a small hole in the cathode, are accelerated, and then exit through a small hole in the anode. Assume the plates act as a capacitor.
a. What is the electric field strength and direction between the plates?
b. With what speed does an electron exit the electron gun if its entry speed is close to zero? [Note: ignore relativity]
c. If the capacitance of the plates is 1 nF, how much charge is stored on each plate? How many extra electrons does the cathode have?
d. If you wanted to push an electron from the anode to the cathode, how much work would you have to do?

Answer:  Its b, The only problem with this is is there supposed to be a picture?

Explanation: NASA has used there fancy gadgets to figure this out but if there was a picture, this answer could be different.

Answer:

A and B is positive charge

C_negative

Explanation:

because when an ebonite is rubbed with fur produce negative charge due to law of electrostatic like charge repel and unlike attract

Answer:

786 Hz

Explanation:

Recall, the speed of sound is

v = 332 + 0.6t

Where t = 23°

v = 332 + 0.6(23)

v = 332 + 13.8

v = 345.8 m

Also, it is known that distance between two consecutive resonance length is half of the wavelength.

L2 - L1 = λ/2

34 - 12 = λ/2

λ/2 = 22

λ = 44 cm

Finally, remember that also

Frequency = speed/ wavelength

Frequency = 345.8/0.4

Frequency = 786 Hz

Therefore, the frequency of the tuning fork is 786 Hz

Answer:

A. F = 0.06 N

B. t = 6.37 s

Explanation:

A)

First we need to find the constant acceleration of the cart. For this purpose, we use 2nd equation of motion:

s = (Vi)(t) + (0.5)at²

where,

s = distance traveled = 1.62 m

Vi = 0 m/s   (Since, it starts from rest)

t = Time Taken = 4.34 s

a = acceleration = ?

Therefore,

1.62 m = (0 m/s)(4.34 s) + (0.5)(a)(4.34 s)²

1.62 m/9.4178 s² = a

a = 0.172 m/s²

Now, from Newton's Second law, we know that:

F = ma

where,

F = Net Force of the combination = ?

m = Mass pf combination = 354 g = 0.354 kg

Therefore,

F = (0.354 kg)(0.172 m/s²)

F = 0.06 N

B)

Now, for the same force, but changed mass = 762 g = 0.762 kg, we have the acceleration to be:

F = ma

a = F/m

a = 0.06 N/0.762 kg

a = 0.08 m/s²

Now, using  2nd equation of motion:

s = (Vi)(t) + (0.5)at²

1.62 m = (0 m/s)(t) + (0.5)(0.08 m/s²)t²

t² = 1.62 m/(0.04 m/s²)

t = √40.54 s²

t = 6.37 s

Answer:

a. 42N

b. 11.8m/s

c. 1.69s

d. 160N

Explanation:

a)  The tension of the rope is 130.66 N.

b) The speed of the bucket while strike the water = 4.64 m/s.

c) The time of fall is  = 4.303 second.

d)  While the bucket is falling, what is the force exerted on the cylinder by the axle is  130.66 N.

Mass of the water bucket; M = 15.0 kg

Mass of the cylinder; m =  12.0 kg

Height of the bucket; h = 10.0 m.

They are connected by a rope and a pivots.

So, acceleration of them is same and let it be a.

So equation of motion of both of them be:

Mg - T = Ma

and, T - mg = ma

Hence, a = g(M-m)/(M+m)

= 9.8(15-12)/(15+12)

= 1.08 m/s²

And, T = m(g+a)

= 12.0(9.8+1.08)

= 130.66 N.

a) so tension of the rope is 130.66 N.

b) speed of the bucket while strike the water = √2ah =√(2×1.08×10.0) m/s = 4.64 m/s.

c) The time of fall is = √2h/a = √(2×10/1.08) second = 4.303 second.

d) While the bucket is falling, what is the force exerted on the cylinder by the axle is tension of the rope, that is, 130.66 N.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ5

Answer:

To solve this problem we just need to graph two forces with same direction, pointing to different sides with intensities of 40 N and 60 N.

The image attached shows these forces.

Notice that the vectors are parallel, that's because they have the same direction, but they point to different sides, and their magnitudes have a difference of 20 N.

Answer:

a.[tex]5.66ms^{-2}[/tex]

b.55 m

Explanation:

We are given that

Mass ,m=0.9 kg

Length of string,l=50 cm=[tex]\frac{50}{100}=0.50 m[/tex]

1 m=100 cm

[tex]\theta=30^{\circ}[/tex]

R=55 m

a.Centripetal acceleration

[tex]a_c=gtan\theta[/tex]

[tex]a_c=9.8tan30^{\circ}[/tex]

[tex]a_c=5.66 m/s^2[/tex]

Hence, the radial acceleration of the bus=[tex]5.66m/s^2[/tex]

b. Radius of curve,R=55 m

Answer:

a = 17 m / s²

Explanation:

For this experiment that the astronauts are carrying out, the value of the relation of gravity is cosecant, therefore we can use the kinematic relations

         v² = v₀² + 2a y

They indicate the initial speed 1.2 m / s the final speed 4.3 m / s and the distance remembered 0.5 m

we clear

        a = (v² - v₀²) / 2y

we calculate

       a = (4.3² -1.2²) / 2 0.5

       a = 17 m / s²

this is the gravity of the new planet

Answer:

by using it's buoyant or floating effect by Archimedes.

the buoyant force act on the astronauts body and make he/ she feels like in low gravity.

the buoyant force equation is

F = Density of liquid x earth gravitational field x volume of astronauts body and suit.

the Weight of astronauts in the pools will be less than in the land or air.

Weight in water = weight in air/land - buoyant force

so the astronauts will feel like in the outer space with low gravity.

Answer:

F = ILB

Explanation:

To find the net force on the conducting bar you take into account the following expression:

[tex]\vec{F}=I( \vec{L}X \vec{B})[/tex]

I: current in the conducting bar

L: length of the bar

B: magnitude of the magnetic field

In this case the direction of the magnetic field and the motion of the bar are perpendicular between them. The direction of the bar is + i, and the magnetic field poits upward + k. The cross product of these vector give us the direction of the net force:

+i X +k = +j

The direction of the force is to the right and its magnitude is F = ILB

Answer:

27J

Explanation:

From conservation of Thermal energy, the total internal energy is the total sum of energy supplied or taken from the system plus work done for or on the system.

Now the change in internal energy would be the sum of the received energy substended in the gas plus the work done by the system which is workdone that it will sustend in pushing the lid. This is expressed mathematically as;

U = Q + (F×d);

U- change in internal energy

Q is the energy received by the system and is positive when energy is received by the system.

Fxd is the workdone and is positive since the gas pushes up the lid- the system does work.

U=12+(3×5)= 27J

Answer:

  a = - e E / m

a = - 1,758 10¹¹ E

Explanation:

For this exercise we can use Newton's second law

        F = m a

where the force is electric

 the forces given by the product of the charge by the electric field

         F = q E

in this case tell us that the charge is the charge of the electron

         q = -e = - 1.6 10⁻¹⁹ C

we substitute

        - e E = m a

          a = - e E / m

we calculate

           a = - 1.6 10⁻¹⁹ / 9.1 10⁻³¹ E

           a = - 1,758 10¹¹ E

The negative sign indicates that the acceleration is in the opposite direction to the electric field

Answer:

32mi

Explanation:

If 1lb contains 3,500 Cal

It means the number of hours required to burn 3500cal would be;

3500/331 = 10.57hours

But a brisk walk is 3.0 mi/h,

It means a distance of 3.0 × 10.57 mi would be covered = 31.71 miles

32miles{ approximated to the nearest whole}

Note Distance = speed × time

Answer: [tex]2m/s^2[/tex]

Explanation:

[tex]Formula: F=ma[/tex]

Where;

F = force

m = mass

a = acceleration

Solve for a;

[tex]a=\frac{F}{m}[/tex]

[tex]a=\frac{30N}{15kg}\\ a=2m/s^2[/tex]

Answer:

hypothesis , hope it helps

Explanation:

Answer:

Inference

Explanation:

Inference is something you predict after testing that's a result after an hypothesis has been made. Hypothesis is an intelligent guess based on some observed phenomena which can be subjected to further testing.

Answer:

Explanation:

The Law of Energy Conservation states that K1 + U1 = K2 + U2

m= 72.0 kg

h= 3.90 m

a)

K1 + U1 = K2 + U2

0 + mgh = 1/2mvf^2 + 0

mass cancels out so gh=1/2vf^2

(9.8 m/s^2)(3.9 m)=(.5)(vf^2)

vf= 8.74 m/s

b)

1/2mv^2 + mgh = 1/2mv^2 + 0

mass cancels again

(.5)(2.9^2 m/s) + (9.8 m/s^2)(3.9 m) = (.5)(vf^2)

vf= 9.21 m/s

c)

This would be the same as the past problem as the velocity gets squared so direction along the axis doesn't matter. Thus, vf= 9.21 m/s

Answer:

  c.  in the absence of an unbalanced force, an object at rest will stay at rest and an object in motion will stay in motion.

Explanation:

First law: things keep doing what they are doing, unless force is applied.

Answer:

T₁ = 378.33 k = 105.33°C

Explanation:

From Fourier's Law of heat conduction, we know that:

Q = - KAΔT/t

where,

Q = Heat Transfer Rate = 1400 W

K = Thermal Conductivity of Material (Aluminum) = 237 W/m.k

A =Surface Area through which heat transfer is taking place=circular bottom

A = π(radius)² = π(0.15 m)² =  0.0707 m²

ΔT = Difference in Temperature of both sides of surface = T₂ - T₁

T₁ = Temperature of outer surface = ?

T₂ = Temperature of inner surface = 105°C + 273 = 378 k

ΔT = 388 k - T₁

t = thickness of the surface (Bottom of Pot) = 0.4 cm = 0.004 m

Therefore,

1400 W = - (237 W/m.k)(0.0707 m²)(378 k - T₁)/0.004 m

(1400 W)/(4188.14 W/k) = - (378 k - T₁)

T₁ = 0.33 k + 378 k

T₁ = 378.33 k = 105.33°C

Answer:

(a) [tex]emf_L=-LI_{max}\omega cos(\omega t)[/tex]

(b) neither increasing or decreasing

(c) opposite to the flow of charge carriers

Explanation:

The current through an inductor of inductance L is given by:

[tex]I(t)=I_{max}sin(\omega t)[/tex]   (1)

(a) The induced emf is given by the following formula

[tex]emf_L=-L\frac{dI}{dt}[/tex]    (2)

You derivative the expression (1) in the expression (2):

[tex]emf_L=-L\frac{d}{dt}(I_{max}sin(\omega t))\\\\emf_L=-LI_{max}\omega cos(\omega t)[/tex]

(b) At t=0 the current is zero

(c) At t = 0 the emf is:

[tex]emf_L=-\omega LI_{max}[/tex]

w, L and Imax have positive values, then the emf is negative. Hence, the induced emf is opposite to the flow of the charge carriers.

(d) read the text carefully

At t zero,  the current through the inductor neither increasing nor decreasing because current is zero.

The current through an inductor of inductance L can be calculated by

[tex]\bold {I_t = I_m_a_x sin (\omega t)}[/tex].........1  

(a) The induced emf can be calculated by  

[tex]\bold {emf_L = - L \dfrac {dI}{dt}}[/tex]............2  

Derivative the equation (1) in the equation (2)

[tex]\bold {emf _L= -L \dfrac {d (I _m_a_x sin (\omega t)} {dt}}\\\\\bold {emf _L= -L (I _m_a_x \omega cos( \omega t) }[/tex]

(b) At t=0 the current is zero,

(c) At t = 0 the emf is:

[tex]\bold {emf_L = -\omega LI _m_a_x}[/tex]  

Therefore, at t zero,  the current through the inductor neither increasing nor decreasing because current is zero.

To know more about inductance,

https://brainly.com/question/17431388

Answer:

0.981 rad/sec^2

Explanation:

mass that pulls on string = 5 kg

weight due to mass = 5 x 9.81 = 49.05 N

radius of rod = 0.1 m

torque produced by this force on the rod = force x radius

torque = 49.05 x 0.1 = 4.905 N-m

mass of disk = 125 kg

radius of disk = 0.2 m

moment of inertia of the disk I = m[tex]r^{2}[/tex]

I = 125 x [tex]0.2^{2}[/tex] = 5 kg-m^2

from the equation, T = Iα

where T is torque

I is moment of inertia

α is angular acceleration

imputing values,

4.905 = 5α

α = 4.905/5 = 0.981 rad/sec^2

Answer:

D

Explanation:

Insoluble impurities would not change the constituent of the substance. Soluble would for example salt water takes longer time for the water to become vapour when subjected to the same temperature that normal water.

Wind would affect, the more windy the tendency for particles of the liquid to be moved into the atmosphere.

With an increase in surface area, the evaporation rate increase . Take a clue from water placed on the ground and exposed to the atmosphere and that same quantity of water is placed in a cup. That on the floor would evaporate faster.

Similarly the higher the temperature a substance is subjected to the easier is it's rate of evaporation. Take for instance water in a cup placed in the sun and that same placed in a room with mild temperatures than that of the sun.With time that in the sun decreases in volume faster than that in the room.

Answer:

x2 = 64 revolutions.

it rotate through 64 revolutions in the next 5.00 s

Explanation:

Given;

wheel rotates from rest with constant angular acceleration.

Initial angular speed v = 0

Time t = 2.50

Distance x = 8 rev

Applying equation of motion;

x = vt +0.5at^2 ........1

Since v = 0

x = 0.5at^2

making a the subject of formula;

a = x/0.5t^2 = 2x/t^2

a = angular acceleration

t = time taken

x = angular distance

Substituting the values;

a = 2(8)/2.5^2

a = 2.56 rev/s^2

velocity at t = 2.50

v1 = a×t = 2.56×2.50 = 6.4 rev/s

Through the next 5 second;

t2 = 5 seconds

a2 = 2.56 rev/s^2

v2 = 6.4 rev/s

From equation 1;

x = vt +0.5at^2

Substituting the values;

x2 = 6.4(5) + 0.5×2.56×5^2

x2 = 64 revolutions.

it rotate through 64 revolutions in the next 5.00 s

Answer:

a. 63.89°  in the north-southward manner

b.  2.2 sec

Explanation:

The goose is flying at 100 km/h

Air from east to west is 44 km/h

angle relative to the north-south direction for the bird to travel south will be

cos∅ = 44/100 = 0.44

∅ = [tex]cos^{-1}[/tex]0.44 = 63.89°  in the north-southward manner

Speed south relative to the ground will be v

Tan 63.89 = v/100

2.04 = v/100

v = 2.04 x 100 = 204 km/hr

to cover a distance of 450 m from north to south at this speed time will be

t = d/v = 450/204 = 2.2 sec

Answer:

Approximately [tex]0.608[/tex] (assuming that [tex]g = 9.81\; \rm N\cdot kg^{-1}[/tex].)

Explanation:

The question provided very little information about this motion. Therefore, replace these quantities with letters. These unknown quantities should not appear in the conclusion if this question is actually solvable.

This answer will approach this question in two steps:

For simplicity, let [tex]a_{T}[/tex] represent the tangential acceleration ([tex]1.90\; \rm m \cdot s^{-2}[/tex]) of this car.

The question gave no information about the distance that the car has travelled before it skidded. However, information about the angular displacement is indeed available: the car travelled (without skidding) one-quarter of a circle, which corresponds to [tex]90^\circ[/tex] or [tex]\displaystyle \frac{\pi}{2}[/tex] radians.

The angular acceleration of this car can be found as [tex]\displaystyle \alpha = \frac{a_{T}}{r}[/tex]. ([tex]a_T[/tex] is the tangential acceleration of the car, and [tex]r[/tex] is the radius of this circular track.)

Consider the SUVAT equation that relates initial and final (tangential) velocity ([tex]u[/tex] and [tex]v[/tex]) to (tangential) acceleration [tex]a_{T}[/tex] and displacement [tex]x[/tex]:

[tex]v^2 - u^2 = 2\, a_{T}\cdot x[/tex].

The idea is to solve for the final angular velocity using the angular analogy of that equation:

[tex]\left(\omega(\text{final})\right)^2 - \left(\omega(\text{initial})\right)^2 = 2\, \alpha\, \theta[/tex].

In this equation, [tex]\theta[/tex] represents angular displacement. For this motion in particular:

Solve this equation for [tex]\omega(\text{final})[/tex] in terms of [tex]a_T[/tex] and [tex]r[/tex]:

[tex]\begin{aligned}\omega(\text{final}) &= \sqrt{2\cdot \frac{a_T}{r} \cdot \frac{\pi}{2}} = \sqrt{\frac{\pi\, a_T}{r}}\end{aligned}[/tex].

Let [tex]m[/tex] represent the mass of this car. The centripetal force at this moment would be:

[tex]\begin{aligned}F_C &= m\, \omega^2\, r \\ &=m\cdot \left(\frac{\pi\, a_T}{r}\right)\cdot r = \pi\, m\, a_T\end{aligned}[/tex].

Since the track is flat (not banked,) the only force on the car in the horizontal direction would be the static friction between the tires and the track. Also, the size of the normal force on the car should be equal to its weight, [tex]m\, g[/tex].

Note that even if the size of the normal force does not change, the size of the static friction between the surfaces can vary. However, when the car is just about to skid, the centripetal force at that very moment should be equal to the maximum static friction between these surfaces. It is the largest-possible static friction that depends on the coefficient of static friction.

Let [tex]\mu_s[/tex] denote the coefficient of static friction. The size of the largest-possible static friction between the car and the track would be:

[tex]F(\text{static, max}) = \mu_s\, N = \mu_s\, m\, g[/tex].

The size of this force should be equal to that of the centripetal force when the car is about to skid:

[tex]\mu_s\, m\, g = \pi\, m\, a_{T}[/tex].

Solve this equation for [tex]\mu_s[/tex]:

[tex]\mu_s = \displaystyle \frac{\pi\, a_T}{g}[/tex].

Indeed, the expression for [tex]\mu_s[/tex] does not include any unknown letter. Let [tex]g = 9.81\; \rm N\cdot kg^{-1}[/tex]. Evaluate this expression for [tex]a_T = 1.90\;\rm m \cdot s^{-2}[/tex]:

[tex]\mu_s = \displaystyle \frac{\pi\, a_T}{g} \approx 0.608[/tex].

(Three significant figures.)

Answer:

Explanation:

The power rating of the battery isn't provided. But let us assume that it is one of the common batteries with ratings of 12 V and 50 A.h

Potential energy possessed by water at that height = mgh

m = mass of the water = ρV

ρ = density of water = 1000 kg/m³

V = volume of water = ?

g = acceleration due to gravity = 9.8 m/s²

h = height of water = 50 cm = 0.5 m

Potential energy = ρVgh = 1000 × V × 9.8 × 0.5 = (4900V) J

Energy of the battery = qV

q = 50 A.h = 50 × 3600 = 180,000 C

V = 12 V

qV = 180,000 × 12 = 2,160,000 J

Energy = 2,160,000 J

At a 100% conversion rate, the energy of the water totally powers the battery

(4900V) = (2,160,000)

4900V = 2,160,000

V = (2,160,000/4900)

V = 440.82 m³

Hence, with our assumed power ratings for the battery (12 V and 50 A.h), 440.82 m³ of water at the given height of 50 cm would power the battery.

Incase the power ratings of the battery in the complete question is different, this solution provides you with how to obtain the correct answer, given any battery power rating.

Hope this Helps!!!

Answer:

Overall charge still remains zero on conductor until touched by charged rod.

Explanation:

Here, we want to know what has happened to the overall charge on the conductor.

Since the conductor is neutral, the overall charge on the conductor must remain zero because positive charge is induced on close end to rod then equal and negaitve charge is induced on far end to rod.

Thus, overall charge still remains zero on conductor until touched by charged rod.

Answer:

Explanation:

Let the plastic rod extends from - L to + L .

consider a small length of dx on the rod on the positive x axis at distance x . charge on it =  λ dx where  λ is linear charge density .

It will create a field at point P on y -axis . Distance of point P

= √ x² + .15²

electric field at P due to small charged length

dE = k λ dx x  / (x² + .15² )

Its component along Y - axis

= dE cosθ where θ is angle between direction of field dE and y axis

= dE x .15 / √ x² + .15²

=  k λ dx  .15 / (x² + .15² )³/²

If we consider the same strip along the x axis at the same position  on negative x axis , same result will be found . It is to be noted that the component of field in perpendicular to y axis will cancel out each other . Now for electric field due to whole rod at point p , we shall have to integrate the above expression from - L to + L

E = ∫  k λ  .15  / (x² + .15² )³/² dx

=  k λ  x L / .15 √( L² / 4 + .15² )

b) The length of the rod:

[tex]E = \int\limits dx . k \lambda .15 / (x^2 + .15^2 )^{1/2} dx\\\\E= \frac{k \lambda * L}{0.15} \sqrt{( L^2 / 4 + .15^2 )[/tex]

Given:

d = 1.5 mλ = 2.5 nC/m

Let the plastic rod extends from - L to + L .Consider a small length of dx on the rod on the positive x axis at distance x . charge on it = λ dx where λ is linear charge density .It will create a field at point P on y -axis.

Distance of point P =[tex]\sqrt{x^2 + 0.15^2}[/tex]

E.F at P due to small charged length[tex]dE = \frac{ k \lambda x.dx}{(x^2 + .15^2 )}[/tex]

Its component along Y - axis = dE cosθ where θ is angle between direction of field dE and y axis

[tex]= \frac{dE x .15 }{\sqrt{x^2 + .15^2} }\\\\= \frac{k \lambda dx .15}{(x^2 + .15^2 )^{1/2}}[/tex]

If we consider the same strip along the x axis at the same position on negative x axis , same result will be found . We can say that the component of field in perpendicular to y axis will cancel out each other.

Now for electric field due to whole rod at point p , we shall have to integrate the above expression from - L to + L

[tex]E = \int\limits dx . k \lambda .15 / (x^2 + .15^2 )^{1/2} dx\\\\E= \frac{k \lambda * L}{0.15} \sqrt{( L^2 / 4 + .15^2 )}[/tex]

Find more information about Electric field here:

brainly.com/question/14372859

Complete question is;

Assuming 100% efficient energy conversion how much water stored behind a 50 centimeter high hydroelectric dam would be required to charge the battery with power rating, 12 V, 50 Ampere-minutes

Answer:

Amount of water required to charge the battery = 7.35 m³

Explanation:

The formula for Potential energy of the water at that height = mgh

Where;

m = mass of the water

g = acceleration due to gravity = 9.8 m/s²

H = height of water = 50 cm = 0.5 m

We know that in density, m = ρV

Where;

ρ = density of water = 1000 kg/m³

V = volume of water

So, potential energy is now given as;

Potential energy = ρVgH = 1000 × V × 9.8 × 0.5 = (4900V) J

Now, formula for energy of the battery is given as;

E = qV

We are given;

q = 50 A.min = 50 × 60 = 3,000 C

V = 12 V

Thus;

qV = 3,000 × 12 = 36,000 J

E = 36,000 J

At a 100% conversion rate, the energy of the water totally powers the battery.

Thus;

(4900V) = (36,000)

4900V = 36,000

V = 36,000/4900

V = 7.35 m³

Answer:

a = -0.8 m/s²

Here, negative sign indicates that the acceleration has opposite direction to the direction of motion.

Explanation:

First we find the angular acceleration of the ball from the following formula:

α = (ωf - ωi)/t

where,

α = angular acceleration = ?

ωf = final angular velocity = 7 rad/s

ωi = initial angular velocity = 13 rad/s

t = Time taken = 15 s

Therefore,

α = (7 rad/s - 13 rad/s)/15 s

α = - 0.4 rad/s

negative sign shows that acceleration is in opposite direction to the direction of motion.

Now, for the linear acceleration, we use the formula:

a = rα

where,

a = linear acceleration = ?

r = radius of circular path = length of rope = 2 m

therefore,

a = (2 m)(- 0.4 rad/s²)

a = -0.8 m/s²

Here, negative sign indicates that the acceleration has opposite direction to the direction of motion.

Answer:

it represents a fundamental difference. (more info below)

Explanation:

Production is incessantly developing and expanding in socialist countries, and employment is guaranteed for the entire productive population. Consequently, the relative overpopulation problem has been eliminated. This represents the fundamental difference between socialism's demographic law and capitalism's law.

hope this helped!