Answer:
255.5cm³
Explanation:
A solution that is 38.08 % by weight has 38.08g of sulfuric acid per 100g of total solution. Thus, mass of solution you need to obtain 125g is:
125g H₂SO₄ × (100g solution / 38.08g H₂SO₄) = 328.3g of solution
As density of the solution is 1.285g / cm³, the volume of 328.3g is:
328.3g × (1cm³ / 1.285g) = 255.5cm³
Orange juice has a hydrogen ion concentration of approximately 10^-4. What is the pH of orange juice?
Black coffee has a hydrogen ion concentration of approximately 10^-5. Is black coffee a stronger or weaker acid than orange juice?
Pure water has a hydrogen ion concentration of 10^-7M. What is the pH of water? Is it acid or base?
A) 4
pH=-log[H+]
pH=-log(10^-4)
B) Weaker
pH of orange juice=4
pH of coffee=5
An acid with pH of 4 is stronger than a pH of 5
C) 7, neither/neutral
pH of water=7
1. 7.85 g of sodium metal is added to 200 mL of 0.0450 M HNO3
a) Predict the mass of the precipitate
b) Predict the amount of excess reagent left over
c) Volume of gaseous product at STP conditions
Answer:
a)0.765 g
b)7.613 g
c)0.20 L
Explanation:
Consider the reaction involved;
Na(s) + HNO3(aq) ----> NaNO3(s) + H2(g)
Note that, if a hot, saturated aqueous solution of sodium nitrate was allowed to cool, solid sodium nitrate would crystallise out of the solution and this would also be classed as a precipitate. This is the case here.
Number of moles of sodium reacted= mass of sodium reacted/ molar mass of sodium
Number of moles of sodium= 7.85g/23gmol-1
Number of moles of sodium= 0.34 moles of sodium
Number of moles of acid reacted= concentration of acid × volume of acid
Number of moles of acid= 0.0450 × 200/1000
Number of moles of acid= 9×10^-3 moles
Therefore, HNO3 is the limiting reactant.
1 mole of HNO3 yield 1 mole of NaNO3
9×10^-3 moles of HNO3 yield 9×10^-3 moles of NaNO3
Hence mass of NaNO3= number of moles × molar mass
Mass of NaNO3= 9.0×10^-3 moles × 84.9947 g/mol
Mass of NaNO3= 0.765 g of NaNO3
b)
Since
1 mole of sodium metal reacts with 1 mole of HNO3
9×10^-3 moles of sodium reacts with 9×10^-3 moles of HNO3
Therefore amount of unreacted sodium metal = 0.34 moles - 9×10^-3 moles = 0.331 moles
Mass of unreacted sodium metal = 0.331 moles × 23 gmol-1= 7.613 g
c)
If 1 mole of HNO3 yields 1 mole of hydrogen gas
9×10^-3 moles of HNO3 yields 9×10^-3 moles of hydrogen gas.
1 mole of hydrogen gas occupies 22.4 L
9×10^-3 moles of hydrogen gas will occupy 9×10^-3 moles × 22.4/1 = 0.20 L
What can happen when tectonic plates move a few centimeters?
Answer:
whole continents can move.
1
Net ionic equations remove spectator ions and shows only the chemical species that are involved in the chemical reaction. Write the net ionic equation for the following acid base reaction.
Molecular Equation: 2 HCl (aq) + Mg(OH)2 (aq) → MgCl2 (aq) + 2 H2O (l)
Complete Ionic: 2 H+ (aq) + 2 Cl– (aq) + Mg2+ (aq) + 2 OH– (aq) → Mg2+ (aq) + 2 Cl– (aq) + 2 H2O (l)
Net Ionic Equation: ______________________________________________________
Answer:
The reaction of an acid and a base is called a neutralization reaction. ... However, in the reaction between HCl(aq) and Mg(OH) 2(aq), additional molecules of HCl and ... First, we will write the chemical equation with the formulas of the reactants ... The chloride ions are the only spectator ions I THINKS
Explanation:
A 15.50 gram sample of a gas exerts a pressure of 1.40 atmospheres when held in an 8.00 liter at 22 °C. What is the molar mass (grams/mol) of the gas?
Answer:
33.5 g/mol
Explanation:
PV=nRT
(1.40 atm)(8.00 L)=n(0.08206)(295 K)
n=0.463 mol
15.50 g/0.463 mol=33.5 g/mol
What is the name of Al2(CO3)3 ?
Answer: Aluminum Carbonate
Explanation:
Answer:
Aluminum carbonate.
Explanation:
It is an aluminum salt form of carbonic acid.
The table below shows the similarity of Methane and water in molecular mass. They are also similar in both size and shape. Why does Methane exist in the gas state with a very low boiling point?
Answer:
Explanation:
In case of Water there are strong hydrogen boding excist as result shows high boiling point, wher as in case of methane the there is no hydrogen bond and excist weak vanderwall attraction between the molcuels so the lower boiling point.
Which body system processes food into a useable source of energy?
Answer:
Glucose, found in the food animals eat, is broken down during the process of cellular respiration into an energy source called ATP. When excess ATP and glucose are present, the liver converts them into a molecule called glycogen, which is stored for later use.
Photosynthesis produces (4 points)
carbon dioxide and energy
carbon dioxide and oxygen
glucose and oxygen
glucose and carbon dioxide
(I'm pretty positive it's C, but correct me if I'm wrong)
Answer:
Glucose and oxygen is produced during photosyntheis
Explanation:
Carbon dioxide and water are required for photosyntheis producing oxygen and glucose
Answer:
C.Glucose and oxygen
An investigation involves determining which metal is better for making pots that will cook food faster.
How will you test for the gas which is liberated when hcl reacts with an active metal ?
Two atoms bonded together will remain some distance apart, minimizing the Question 1 options: A) potential energy of the bond. B) bond distance. C) number of valence electrons in the bond. D) partial charge of the bond. Question 2 (5 points) BeH2 has no lone pairs of electrons. What's the structure of this molecule? Question 2 options: A) Tetrahedral B) Bent C) Octahedral D) Linear Question 3 (5 points) In KCl, how are the valence electrons distributed? Question 3 options: A) The electrons are transferred from K to Cl. B) The electrons are unequally shared between K and Cl, forming a polar covalent bond. C) The electrons are shared between many K and Cl ions, creating a "sea of electrons." D) The electrons are equally shared between K and Cl, forming a covalent bond. Question 4 (5 points) Chlorine can bond with fluorine to form ClF. Chlorine can also bond with lithium to form LiCl. Which compound will have a greater partial charge? Question 4 options: A) Both compounds will have the same partial charge. B) ClF C) LiCl D) Neither compound will have partial charge. Question 5 (5 points) Which of the following elements will not form a polar covalent bond with oxygen? Question 5 options: A) Hydrogen B) Oxygen C) Sodium D) Fluorine Which process is used to produce gases from solutions of salts dissolved in water or another liquid? Question 6 options: A) Electrolysis B) Polar covalent bonding C) Ionic bonding D) Metallic bonding Question 7 (5 points) Saved A chemical reaction has the equation AgNO3 (s) + NaCl (s) → AgCl (s) + NaNO3 (s). What type of reaction occurs between AgNO3 and NaCl? Question 7 options: A) Decomposition B) Double displacement C) Single displacement D) Synthesis
Answer:
1) potential energy of the bond.
2) Linear
3) The electrons are transferred from K to Cl.
4) ClF
5) Oxygen
6) Electrolysis
7) Double displacement
Explanation:
As two atoms approach each other in a bonding situation, the potential energy of the bond is minimized as the internuclear distance of the bonding atoms decreases.
BeH2 has two electron domains and the central beryllium atom is sp2 hybridized. According to valence shell electron pair repulsion theory. A molecule having two regions of electron density will lead to a linear molecule.
KCl is an ionic compound hence there is a transfer of electrons from K(metal) to Cl(nonmetal).
ClF has partial charges because it contains a polar covalent bond. The partial charges arise from the dipole within the molecule. LiF is a pure ionic compound formed by transfer of electrons from Li to F. The species possess full and not partial charges.
When an oxygen atom bonds with another oxygen atom, what has been formed is a homonuclear covalent bond. Since the electro negativity of the both atoms is exactly the same, a pure covalent bond is formed. Recall that polar covalent bonds are formed when there is a significant electro negativity difference between the bonding atoms.
When direct current is passed through certain salt solutions during electrolysis, gases may be evolved and collected at the appropriate electrodes.
A double-replacement reaction is a reaction in which the cations and anions present in two different ionic compounds that are reacting together exchange their positions to form two new compounds on the product side. For instance, look at the reaction shown in question 7 as a typical example of this;
AgNO3 (s) + NaCl (s) → AgCl (s) + NaNO3 (s).
50 POINTS! Fill in the chart below to identify and describe the functional groups associated with organic chemistry.
Name General Structure Properties/Uses
Alcohol
Aldehyde
Ketone
Fatty acid
Ether
Answer:
Alcohol
Structure: Alcohols are organic molecules assembled from carbon (C), oxygen (O), and hydrogen (H) atoms.
Property: The Boiling Point of Alcohols. Alcohols generally have higher boiling points in comparison to other hydrocarbons having equal molecular masses.
Aldehyde
Structure: DescriptionAn aldehyde is a compound containing a functional group with the structure −CHO, consisting of a carbonyl centre.
Property: The polarity of the carbonyl group notably affects the physical properties of melting point and boiling point, solubility, and dipole moment.
Ketone
Structure: A ketone is a functional group with the structure RC(=O)R', where R and R' can be a variety of carbon-containing substituents.
Property: Ketones are soluble in water but their solubility decreases with increase in the length of the chain.
Fatty Acid
Structure: a fatty acid consists of a straight chain of an even number of carbon atoms, with hydrogen atoms along the length of the chain and at one end of the chain and a carboxyl group (―COOH) at the other end.
Property: Fatty acids are solid at room temperature, while unsaturated fatty acids are liquid.
Ether
Structure: a class of organic compounds characterized by an oxygen atom bonded to two alkyl or aryl groups.
Property: An ether molecule has a net dipole moment due to the polarity of C-O bonds.
The functional group associated with ethanol is -OH, the aldehyde is -COH, the ketone is -CO, the fatty acid is -COOH, and ether is ROR.
The functional groups have been the atoms that have different constituents and properties with respect to other groups.
The functional group associated with the following groups has been:
Alcohol: It has been liquid at room temperature with the functional group -OH.Aldehyde: It has been soluble in water with the functional group -COH.Ketone: It has been soluble in water, with C=O in the structure as a functional group.Fatty acid: It has been a long chain acid, with the presence of carboxylic group -COOH.Ether: It has been the pleasant smelling compounds with the presence of the R-O-R group as the functional group.
The functional group associated with ethanol is -OH, the aldehyde is -COH, the ketone is -CO, the fatty acid is -COOH, and ether is ROR.
For more information about the functional group, refer to the link:
https://brainly.com/question/24378712
In an ecosystem, why can only one species fill an ecological niche?
Answer:
Explanation:es porque las especies con nichos idénticos tienen las mismas necesidades, lo que significa que competirían exactamente por los mismos recursos.
Complete the table to summarize the properties of the different subatomic particles by typing in 'yes"
or "no."
A
Answer:
A=yes
B=yes
Explanation:
Just did the same thing
Protons and neutrons are made of quarks but electrons are not. So A is yes, B is Yes and C is No.
What are quarks?
Quarks are extremely small substances which join with each other by extremely strong forces and makeup neutrons and protons of the atom. They combine in a similar way that the protons and neutrons combine to form the nucleus of an atom.
Quarks are categorized in flavours and there are 6 different types of flavours of quarks. The flavours differ from each other on the basis of their charge and mass.
The six flavours of quarks are grouped as three pairs. These are up and down, charm and strange and top and bottom.
Quarks are defined as true elementary particles. They have no defined structure and cannot be subdivided into smaller particles.
Therefore, the correct option is A is yes, B is Yes and C is No.
Read more about quarks, here
https://brainly.com/question/2849549
#SPJ5
Explain why covering something with a blanket can put out a fire
Answer:
No oxygen
Explanation:
when something is covered in a blanket it prevents the fire from being able to have any oxygen
Answer:
Its called smothering the fire
Explanation:
A fire needs three things to burn always: fuel, oxygen, and a heat source. Eventually the heat source will not be an issue, but the oxygen and fuel is. If the fire is small enough throwing a blanket can quite smother it. What happens is it cuts off the oxygen supply the fire needs long enough for it to die out.
How many moles of ethylene glycol must be added to 1 kg of water to make a solution with a freezing point of -2.4°C? The freezing point depression constant for water is 1.86°C•kg/mol. What is the molality of the solution?
Answer: 1.29 moles of ethylene glycol must be added to 1 kg of water to make a solution with a freezing point of -2.4°C. Molality of solution is 1.29 m.
Explanation:
Depression in freezing point is given by:
[tex]\Delta T_f=i\times K_f\times m[/tex]
[tex]\Delta T_f=T_f^0-T_f=(0-(-2.4))^0C=2.4^0C[/tex] = Depression in freezing point
i= vant hoff factor (for non electrolyte , i = 1)
[tex]K_f[/tex] = freezing point constant for water= [tex]1.86^0C/kgmol[/tex]
m= molality =[tex]\frac{\text{moles of solute}}{\text{weight of solvent in kg}}[/tex]
m= molality =[tex]\frac{x}{1kg}[/tex]
[tex]2.4^0C=1\times 1.86^0C/kgmol\times \frac{x}{1kg}[/tex]
[tex]x=1.29[/tex]
Molality = [tex]\frac{\text{moles of solute}}{\text {weight of solvent in kg}}=\frac{1.29mol}{1kg}=1.29m[/tex]
Thus 1.29 moles of ethylene glycol must be added to 1 kg of water to make a solution with a freezing point of -2.4°C. Molality of solution is 1.29 m.
Answer:
1) C (m=T f/Kf)
2) 2.4 C
3) 1.3 m
4) 1.3 moles
Explanation:
This is correct on ed
When KCl dissolves in water
Answer:
They form K₂O (Potassium oxide) and HCl (Hydrochloric acid). This is because K and H are positively charged and O and Cl are negatively charged and cations only bond with anions.
what is an example of a soultion
Answer:
Did you mean solution??
In chemistry, a solution is considered as a special type of homogeneous mixture composed of two or more substances. In such a mixture, a solute is a substance dissolved in another substance, known as a solvent.
Eg: sweet tea or coffee (sugar added to solution)
bleach (sodium hypochlorite dissolved in water)
HOPE IT HELPS :)
a student balanced the chemical equation for the reaction of magnesium with oxygen by writing Mg + O2 ----> MgO2. What is wrong with this equation?
Answer:
Explanation:
Magnesium when it oxidizes has a valence of 2.
Oxygen, when it mixes with something, has a valence of - 2
So Mg and O2 will form something, but what? The answer is MgO
Mg + O2 ===> MgO
To balance this equation, you need 2 Magnesiums on the right and 2 Oxygens also on the right. The left will need a two Magnesiums.
The balanced equation will be
2Mg + O2 ====> 2MgO
how much volume do the gas molecules take up in an inflated balloon
Answer:
The volume of a gas is determined by the volume of the container it is in. Gases take the shape of their container and the volume of the container....
Explanation:
What happens to the volume or size of a balloon as it rises in the air?
When a balloon goes up higher in the air, its size will increase. Since there's less air in the upper atmosphere, there's less stuff pushing back on the balloon, and hence the pressure is lower, which allows the balloon to expand.
Is pressure inside a balloon greater?
The pressure inside the balloon is higher than the pressure on the outside. ... And the direction of airflow is always from higher to lower pressure. If the pressure was same then there would be no airflow and if the pressure outside was higher , air will flow from outside to the inside of the balloon.
What is the relationship between volume and pressure?
Boyle's law is a gas law, stating that the pressure and volume of a gas have an inverse relationship. If volume increases, then pressure decreases and vice versa, when temperature is held constant. Therefore, when the volume is halved, the pressure is doubled; and if the volume is doubled, the pressure is halved.
Mark as brainliest if liked it. Thanks hope this helps
at what temperature would 2.10moles of N2 gas have a pressure of 1.25atm and fill a 25.0 L tank
Answer:
[tex]\large \boxed{\text{-92 $^{\circ}$C}}[/tex]
Explanation:
We can use the Ideal Gas Law and solve for T.
pV = nRT
Data
p = 1.25 atm
V = 25.0 L
n = 2.10 mol
R = 0.082 06 L·atm·K⁻¹mol⁻¹
Calculations
1. Temperature in kelvins
[tex]\begin{array} {rcl}pV & = & nRT\\\text{1.25 atm} \times \text{25.0 L} & = & \rm\text{2.10 mol} \times 0.08206 \text{ L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times T\\31.25&=&0.09847T\text{ K}^{-1}\\T& = &\dfrac{31.25}{\text{0.098 47 K}^{-1}}\\\\& = &\text{181 K}\end{array}[/tex]
2. Temperature in degrees Celsius
[tex]\begin{array} {rcl}T & = & (181 - 273.15) \, ^{\circ}\text{C}\\& = & -92 \, ^{\circ}\text{C}\\\end{array}\\\text{The temperature of the gas is $\large \boxed{\mathbf{-92 \, ^{\circ}}\textbf{C}}$}[/tex]
Calculate the Molarity of a 0.23 mole solution of sucrose, C 12 H 22 O 11 that is dissolved in 5 liters of water.
Answer:
0.046 M
Explanation:
Molarity = mol solute/ L solution = 0.23 mol/ 5 L = 0.046 mol/L = 0.046 M
A simple experiment to demonstrate that NaOH is a stronger alkali than NH3
Answer:
pH value test can be used to demonstrate that NaOH is a stronger alkali than NH3
Explanation:
pH value test can be used to demonstrate that NaOH is a stronger alkali than NH3. This is done by measuring the same volume of equal concentration of hydroxide and ammonia. A glass rod was dipped into 0.2 M of sodium hydroxide and 0.2 M of ammonia, each drop of solution was then placed on a pH paper matched with a color chart and the pH value was recorded.
The result showed that sodium hydroxide being a strong alkali would dissociate completely in aqueous solution thereby having a higher pH while ammonia would dissociate slightly/partially in aqueous solution thereby having a lower pH value
what is pyruvate converted to
Answer:
gold
Explanation:
You make an iron (II) sulfate solution with a molarity of 2.1 M. If the solution is 500 mL total, how many grams of iron (II) sulfate is that?
Answer:
Explanation:
2.1>1000
?>500
(500×2.1)÷1000=1.05moles
Mass= molesx molar mass
1.05×(56+32+(16×4))
1.05×152=159.6g
The atomicity of bromine is
Answer:
So, the atomicity of noble gases is 1. Example. ... So, the atomicity of hydrogen, nitrogen, oxygen, chlorine, bromine and iodine is 2 each.
Explanation:
So, the atomicity of noble gases is 1. Example. ... So, the atomicity of hydrogen, nitrogen, oxygen, chlorine, bromine and iodine is 2 each.
could help
What is the normal boiling point of of a solution containing 64.5g of non volatile quinoline ( MW 129 ) in 500 g of benzene when the normal boiling point is 80.10 and KB = 2.50
Answer:
THE NORMAL BOILING POINT OF A SOLUTION CONTAINING 64.5 g OF QUINOLINE IN 500 g OF BENZENE IS 82.6 C
Explanation:
Boiling point = old boiling point + molarity * boiling point constant (Kb)
First, you calculate the number of moles of quinoline in the solution
number of moles = mass / molar mass
Since the molar mass of quinoline has been given as 129 g/mol
number of moles = 64.5 g / 129 g/mol
number of moles = 0.5 moles.
Next is to determine the molarity:
molarity = number of moles of solute / kilogram of solvent
molarity = 0.5 moles / 500/1000 kg
molarity = 0.5 / 0.5
molarity = 1 M
The new boiling point can then be calculated using the formula:
B. P = old B.P + Kb * molarity
B.P = 80.10 + 2.50 * 1
B.P = 80.10 + 2.50
B.P = 82.6 degree celsius
What shape would a molecule with two bound groups and two lone pairs
have?
A. Trigonal pyramidal
B. Tetrahedral
C. Linear
D. Bent
Answer:
It would have to be D, a bent shape
Explanation:
I just took the quiz
Which phrase best describes the path of a light wave ?
A. Straight away from the source
B. Spiraling around the source
C. Perpendicular to the source
D. Parallel to the source
Answer:
La B
Explanation:
It's B on Ap3x
Straight away from the source
