the delta h value for the reaction is -90.8 kj. 1/2 o2 hg ----> hgo how much heat is released when 66.9 g hg is reacted with oxygen?

Enzymes are biological catalysts that enhance the rate of a reaction by decreasing the activation energy required for the reaction to occur.

Therefore, the correct answer is A) decreasing the activation energy.

Enzymes are biological molecules, usually proteins, that catalyze (increase the rate of) chemical reactions in living organisms. They are highly specialized and can catalyze specific chemical reactions with great efficiency and specificity.

Enzymes work by binding to reactant molecules, called substrates, and facilitating the conversion of these substrates into products through a process called catalysis. Enzymes do not change the energetics of the reaction, but they lower the activation energy required to reach the transition state, making the reaction more likely to occur. This can greatly increase the rate of a reaction and allow it to occur under milder conditions than it would otherwise require.

Option A is correct

To know more about Enzymes here

https://brainly.com/question/14577353

#SPJ1

Not all polysaccharides are reducing. Polysaccharides can be classified into two types based on their reducing properties: reducing polysaccharides and non-reducing polysaccharides.

Reducing polysaccharides contain free carbonyl groups (aldehyde or ketone) that can reduce other substances, such as copper ions, to form a colored product. Examples of reducing polysaccharides include glucose, fructose, and maltose.

Non-reducing polysaccharides, on the other hand, do not contain free carbonyl groups and therefore cannot reduce other substances. Examples of non-reducing polysaccharides include cellulose, chitin, and starch.

It's worth noting that while not all polysaccharides are reducing, many of them can be converted into reducing sugars through various chemical or enzymatic reactions. This conversion is often used in laboratory analysis and industrial applications to quantify the amount of polysaccharides present in a sample.

For more question on polysaccharides click on

https://brainly.com/question/4055234

#SPJ11

Rounding to one decimal place, the answer is not listed as an option. Therefore, there may be an error in the problem statement or calculation. So the correct option is E .

The balanced chemical equation is:

[tex]Na_{2} S[/tex]+ [tex]CuSO_{4}[/tex] -> [tex]Na_{2} SO_{4}[/tex] + CuS

The stoichiometry of the reaction shows that 1 mole of [tex]CuSO_{4}[/tex] reacts with 1 mole of [tex]Na_{2} S[/tex]  to produce 1 mole of CuS.

First, we need to determine the theoretical yield of CuS based on the given amounts of reactants:

Convert 15.5 g [tex]Na_{2} S[/tex] to moles: 15.5 g [tex]Na_{2} S[/tex] / (2 x 23.0 g/mol + 32.1 g/mol) = 0.144 mol [tex]Na_{2} S[/tex]

Convert 12.1 g [tex]CuSO_{4}[/tex] to moles: 12.1 g [tex]CuSO_{4}[/tex] / (63.5 g/mol + 4 x 16.0 g/mol) = 0.0450 mol [tex]CuSO_{4}[/tex]

Since the reaction is 1:1 between [tex]CuSO_{4}[/tex] and [tex]Na_{2} S[/tex] , the limiting reactant is [tex]CuSO_{4}[/tex] .

The theoretical yield of CuS is 0.0450 mol CuS.

Now, we can calculate the percent yield:

Actual yield of CuS = 3.05 g

Theoretical yield of CuS = 0.0450 mol x 95.6 g/mol = 4.31 g

Percent yield = (actual yield / theoretical yield) x 100% = (3.05 g / 4.31 g) x 100% = 70.7%

Rounding to one decimal place, the answer is not listed as an option. Therefore, there may be an error in the problem statement or calculation. So the correct option is E .

Learn more about stoichiometry

https://brainly.com/question/30215297

#SPJ4

In the reaction between methane and chlorine, the bond between chlorine is broken homolytically, meaning that each atom in the bond gets one of the electrons from the bond, forming two free radicals (Cl.).

The reaction between methane and chlorine involves homolytic fission and Cl- radicals. In this reaction, the Cl-Cl bond undergoes homolytic fission, where the bond breaks evenly, and each chlorine atom receives one electron, forming two Cl- radicals. These radicals then react with methane, ultimately leading to the formation of chloromethane and other products.

To know more about Homolytic Fission:

https://brainly.com/question/30926611

#SPJ11

The solubility of [tex]CaF_{2}[/tex] in a solution containing HCl decreases qualitatively due to the formation of a new compound.

When [tex]CaF_{2}[/tex] is added to a solution containing HCl, the solubility of [tex]CaF_{2}[/tex] decreases qualitatively due to the formation of a new compound.

The HCl reacts with [tex]CaF_{2}[/tex] to produce [tex]CaF_{2}[/tex] and HF. As a result, the concentration of [tex]CaF_{2}[/tex] in the solution decreases and the amount of precipitate formed increases.

This reaction is an example of a double displacement reaction, where the ions in the reactants switch partners to form new products.

In summary, the solubility of [tex]CaF_{2}[/tex] in a solution containing HCl decreases qualitatively due to the formation of a new compound.

To know more about solubility, refer here:

https://brainly.com/question/31493083#

#SPJ11

Grignard reagents are organometallic compounds that are formed by reacting an alkyl or aryl halide with magnesium metal in the presence of anhydrous ether. The Grignard reagent is more reactive than the starting organohalide for several reasons:

Polarization: The carbon-magnesium bond in the Grignard reagent is polarized, with the carbon atom carrying a partial negative charge and the magnesium atom carrying a partial positive charge. This polarization makes the carbon atom more nucleophilic, which enhances its reactivity towards electrophiles.

Stability: The Grignard reagent is stabilized by the coordination of the ether molecule to the magnesium cation, which shields the carbon atom from electrophilic attack. This coordination also prevents the Grignard reagent from reacting with water or other protic solvents, which could quench its reactivity.

Basicity: The Grignard reagent is a strong base, with a pKa of approximately 50. This basicity makes it more reactive towards acidic protons, such as those found in carbonyl compounds. The Grignard reagent can undergo nucleophilic addition to the carbonyl group, forming an alkoxide intermediate that can be hydrolyzed to yield an alcohol.

Solubility: The Grignard reagent is soluble in nonpolar solvents, such as diethyl ether or tetrahydrofuran, which allows it to react with nonpolar electrophiles, such as alkyl halides or aryl halides. The solubility of the Grignard reagent in nonpolar solvents also ensures that it remains homogeneous, which facilitates its use in synthetic reactions.

Learn more about  organometallic

https://brainly.com/question/30627719

#SPJ4

The molar mass of a compound is 148 g/mol and the empirical formula is C₄H₁₀O. The molecular formula of this compound is C₈H₂₀O₂.

The molar mass of the compound = 148 g/mol

The empirical formula of the compound = C₄H₁₀O

The empirical formula mass of the C₄H₁₀O is:

= 4(12.01) + 10(1.01) + 1(16.00)

= 74.12 g/mol

n = 148 / 74.12

n = 2

The molecular formula of this compound = n ( empirical compound )

The molecular formula of this compound = 2 ( C₄H₁₀O )

The molecular formula of this compound = C₈H₂₀O₂

The The molar mass of a compound is 148 g/mol and the empirical formula is C₄H₁₀O. The molecular formula of this compound is C₈H₂₀O₂.

The molar mass of the compound = 148 g/mol

The empirical formula of the compound = C₄H₁₀O

The empirical formula mass of the C₄H₁₀O is:

= 4(12.01) + 10(1.01) + 1(16.00)

= 74.12 g/mol

n = 148 / 74.12

n = 2

The molecular formula of this compound = n ( empirical compound )

The molecular formula of this compound = 2 ( C₄H₁₀O )

The molecular formula of this compound = C₈H₂₀O₂.

The molecular formula of this compound is C₈H₂₀O₂.

To learn more about empirical formula here

https://brainly.com/question/14044066

#SPJ4

The pH of the buffer is 3.74. The answer is (c).

To calculate the pH of a buffer solution, we need to use the Henderson-Hasselbalch equation, which is given by pH = pKₐ + log([A⁻]/[HA]), where pKₐ is the negative logarithm of the acid dissociation constant (Kₐ) of the weak acid, [A⁻] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

In this case, formic acid is the weak acid (HA) and potassium formate is the conjugate base (A⁻). The Kₐ value of formic acid is given as 1.8 x 10⁻⁴.

Substituting the given values into the Henderson-Hasselbalch equation, we get:

pH = pKₐ + log([A⁻]/[HA])

pH = -log(1.8 x 10⁻⁴) + log(0.080/0.120)

pH = 3.74

Therefore, the pH of the buffer solution is 3.74, which corresponds to option (c).

To know more about buffer, refer here:
https://brainly.com/question/30777612#
#SPJ11

The prediction of entropy change during the proposed synthesis of solid nitrogen: ΔS is negative, entropy decreases (option C).

The synthesis of solid nitrogen involves the transformation of gaseous nitrogen molecules into a highly ordered crystalline solid. This transition from a disordered gas to an ordered solid state is accompanied by a decrease in entropy, which corresponds to a negative value for the change in entropy (ΔS).

Thus, during the synthesis of solid nitrogen, the molecules become more ordered, leading to a decrease in entropy. Therefore, the entropy change (ΔS) is negative.

Learn more about entropy: https://brainly.com/question/1301642

#SPJ11

The Bohr model and the quantum mechanical model are both models that describe the behavior of the hydrogen atom. They are similar in that they both predict discrete energy levels for the hydrogen atom.

The Bohr model was developed in 1913 and it assumes that the electrons move in circular orbits around the nucleus. The quantum mechanical model, on the other hand, was developed in the 1920s and it describes the electrons in terms of wave functions.

The key difference between these models is that the Bohr model is a classical model, while the quantum mechanical model is a quantum mechanical model. The Bohr model is limited in its ability to describe the behavior of atoms with more than one electron, while the quantum mechanical model can be applied to any atom.

The Bohr model also assumes that the electrons move in circular orbits, while the quantum mechanical model describes the electrons in terms of probability distributions.

In summary, both models are useful for understanding the behavior of the hydrogen atom, but the quantum mechanical model is a more comprehensive model that can be applied to a wider range of atoms.

To know more about Bohr model refer here:

https://brainly.com/question/3964366#

#SPJ11

The change in entropy of the 979 piece of granite is approximately 1.53 J/K.

To calculate the change in entropy, we need to use the formula:

ΔS = Cln(T2/T1)

where ΔS is the change in entropy, C is the heat capacity of the material, T1 is the initial temperature, and T2 is the final temperature.

Since the material in question is granite, we can assume that its heat capacity is approximately constant over the given temperature range. We can use the specific heat capacity of granite (0.79 J/g*K) to calculate the entropy change:

ΔS = (0.79 J/g*K) * ln(59°C/15.8°C)

≈ 1.53 J/K

Therefore, the change in entropy of the 979 piece of granite is approximately 1.53 J/K.

Click the below link, to learn more about Change in Entropy:

https://brainly.com/question/1477087

#SPJ11

According to unit conversion,  the average rate of the reaction during this time interval is 0.003 mole/dm³.

Unit conversion is defined as a multi-step process which involves multiplication or a division operation by a numerical factor.The process of unit conversion requires selection of appropriate number of significant figures and the rounding off procedure.

It involves a conversion factor which is an expression for expressing the relationship between the two units.Average rate is calculated as, 0.6-0.512/25=0.003 mole/dm³.

Learn more about unit conversion,here:

https://brainly.com/question/19420601

#SPJ4

Prevention and maintenance are key aspects of maintaining optimal musculoskeletal health. To prevent deformity, it is important to maintain proper posture and alignment during activities of daily living and exercise. Regular stretching and strengthening exercises can help maintain existing capacity for motion.

In cases where diminished capacities for motion, strength, and endurance are present, restoration becomes the focus. Physical therapy and rehabilitation programs can help improve these deficits, restoring functional abilities and enhancing overall quality of life.
In some cases, compensation may be necessary to adapt for limited motion. This can involve modifying activities or using assistive devices to improve function and reduce the risk of further injury. Ultimately, a proactive approach to musculoskeletal health can help individuals maintain optimal function and mobility throughout their lives.

Learn more about physical therapy here, https://brainly.com/question/29368348

#SPJ11

Suppose that CH4 reacts completely with O2 to form CO2 and H20 with a total pressure of 1.2 torr. The partial pressure of H20 is c. 0.8 torr

We must first understand the balanced chemical equation for this reaction: CH4 + 2O2 → CO2 + 2H2O
This equation shows that for every mole of CH4, 2 moles of H2O are produced. When CH4 reacts completely, the mole ratio of CH4 to H2O is 1:2.
Since the total pressure of the system is given as 1.2 torr, we can now determine the partial pressures of CO2 and H2O using the mole ratios.

The partial pressure of H2O is twice that of CO2, so let the partial pressure of CO2 be x and that of H2O be 2x.
x + 2x = 1.2 torr
3x = 1.2 torr
x = 0.4 torr
The partial pressure of H2O is 2x, so: 2 * 0.4 torr = 0.8 torr
Therefore, the partial pressure of H2O is 0.8 torr, which corresponds to option (c) in the given choices.

learn more about partial  pressure here:

https://brainly.com/question/30668745

#SPJ11

10.0 mL of 0.10 M NaOH would need to be added to 10.0 mL of 0.10 M HC₂H₃O₂ to prepare a solution with pH = 5.50.

To prepare an acetate buffer solution with pH 5.50, we need to make sure that the concentration of acetate ions (C₂H₃O₂-) and acetic acid (HC₂H₃O₂) in the solution are in a specific ratio, which corresponds to the pKa of acetic acid (4.76) at the desired pH (5.50).

The Henderson-Hasselbalch equation can be used to calculate the required ratio of C₂H₃O₂- to HC₂H₃O₂:

pH = pKa + log([C₂H₃O₂-]/[HC₂H₃O₂])

Substituting the values for pH and pKa, we get:

5.50 = 4.76 + log([C₂H₃O₂-]/[HC₂H₃O₂])

Solving for [C₂H₃O₂-]/[HC₂H₃O₂], we get:

[C₂H₃O₂-]/[HC₂H₃O₂] = antilog(5.50 - 4.76) = 3.55

So, for every molecule of acetic acid, there must be 3.55 molecules of acetate ions in the solution.

Now, let's consider the reaction between HC₂H₃O₂ and NaOH:

HC₂H₃O₂ + NaOH → NaC₂H₃O₂ + H2O

The balanced equation shows that for every mole of HC₂H₃O₂ that reacts with NaOH, one mole of NaC₂H₃O₂ is formed.

Since we know the initial concentration of HC₂H₃O₂ and the desired concentration of acetate ions in the final buffer solution, we can calculate the amount of NaOH needed to react with the excess acetic acid to produce the desired amount of acetate ions.

First, we calculate the number of moles of HC₂H₃O₂ present in 10.0 mL of 0.10 M solution:

moles of HC₂H₃O₂ = Molarity x volume (in liters) = 0.10 x 0.010 = 0.001 mol

Since we need a ratio of 1:3.55 of HC₂H₃O₂  to C₂H₃O₂-, we calculate the number of moles of C₂H₃O₂- needed:

moles of C₂H₃O₂- = 3.55 x 0.001 = 0.00355 mol

To form 0.00355 moles of NaC₂H₃O₂, we need to react the excess HC₂H₃O₂ with an equal amount of NaOH.

The amount of NaOH needed can be calculated using the following equation:

moles of NaOH = moles of HC₂H₃O₂ = 0.001 mol

Finally, we can calculate the volume of 0.10 M NaOH required:

Volume of NaOH = moles of NaOH / Molarity = 0.001 mol / 0.10 M = 0.010 L = 10 mL

to know more about buffer refer here:

https://brainly.com/question/22821585#

#SPJ11

The correct answer is not given, but the closest one is A) 71.0 g.

The balanced equation tells us that two moles of Na reacts with one mole of Cl2 to produce two moles of NaCl. We can use this information to calculate the moles of Cl2 required to produce 117 grams of NaCl:

117 g NaCl / (58.44 g NaCl/mol) = 2.00 mol NaCl

Since two moles of NaCl are produced from one mole of Cl2, we need half as many moles of Cl2 as we have moles of NaCl:

2.00 mol NaCl / 2 = 1.00 mol Cl2

Finally, we can use the molar mass of Cl2 to convert moles to grams:

1.00 mol Cl2 x (70.90 g Cl2/mol) = 70.90 g Cl2

Therefore, we need 70.90 grams of Cl2 to make 117 grams of NaCl.

The correct answer is not given, but the closest one is A) 71.0 g.

Learn more about moles ,

https://brainly.com/question/26416088

#SPJ4

Entropy-driven effects, not enthalpy-driven ones, are principally responsible for the tendency of hydrophobic residues to occupy the inside of proteins.

A thermodynamic term called enthalpy is used for the heat flow or content of a system under a constant pressure. The definition of this substance, which goes by the symbol H, is the total of a system's internal energy plus the sum of its volume and pressure. Enthalpy is a state-dependent operation, which implies that it only depends on the system's initial as well as final states and not on the route used to change between them. Due to its usefulness in thermodynamics, which enables us to determine how much heat is taken in or released.

To know more about Enthalpy visit :

https://brainly.com/question/16720480

#SPJ1

Besides alpha and beta particles, unstable radioactive atoms can also emit gamma rays, which are a form of electromagnetic radiation.

Gamma rays have no mass and no charge and are highly penetrating, making them dangerous to living organisms. They are typically emitted by the nucleus of an atom during a nuclear decay process, often following the emission of an alpha or beta particle.

Gamma rays have high energy and can ionize atoms and molecules, causing damage to biological tissues and leading to the risk of cancer and other radiation-related illnesses.

For more question on radioactive atoms click on

https://brainly.com/question/1383030

#SPJ11

The first step in the mechanism of formation of succinyl-CoA, GDP and Pi from succinate, GTP and CoA is- nucleophilic attack by γ-phosphate on GTP to form phosphosuccinate, option A.

It is a crucial step in the citric acid cycle and is produced by the enzyme -ketoglutarate dehydrogenase from -ketoglutarate by decarboxylation. Coenzyme A is introduced at this time.

It is also produced from propionyl CoA, the odd-numbered fatty acid that cannot undergo beta-oxidation, using B12 as an enzyme cofactor. A vitamin B12-dependent enzyme converts propionyl-CoA to D-methylmalonyl-CoA, isomerizes it to L-methylmalonyl-CoA, and then rearranges it to produce succinyl-CoA. Although succinyl-CoA is an intermediary in the citric acid cycle, there is no net consumption of succinyl-CoA, therefore it cannot be easily integrated there. In order to join the citric acid cycle, succinyl-CoA must first be transformed into malate and subsequently into pyruvate.

Learn more about succinyl-CoA:

https://brainly.com/question/13037157

#SPJ4

Complete question;

The reaction catalyzed by succinyl-CoA synthetase is a reversible reaction. What would be the first step in this mechanism moving in the direction toward the formation of succinyl-CoA, GDP, and P; from succinate, GTP, and COA? Choose one: O

A. nucleophilic attack by Y-phosphate on GTP to form phosphosuccinate B. nucleophilic attack by Y-phosphate on GTP to form phosphohistidine  

C. reaction initiated by histidine lone pair to form phosphohistidine

D. nucleophilic attack to form succinyl-CoA

Answer:

The gas law that applies in this scenario is Boyle's law, which states that the pressure of a gas is inversely proportional to its volume at constant temperature.

Using Boyle's law equation:

P₁V₁ = P₂V₂

where P₁ is the initial pressure, V₁ is the initial volume, P₂ is the final pressure, and V₂ is the final volume.

Plugging in the given values:

P₁ = 760 mmHg

V₁ = 10 L

V₂ = 20 L

Solving for P₂:

P₂ = P₁V₁/V₂ = 760 mmHg x 10 L / 20 L = 380 mmHg

Therefore, the new gas pressure will be 380 mmHg

By using the combined gas law, which states that the pressure, volume, and temperature of a gas are related by the equation:

P1V1/T1 = P2V2/T2

where:

P1 =initial pressure

V1 =initial volume

P2 and V2 are the final pressure and volume, respectively.

We are given that the initial pressure P1 is 760 mmHg and the initial volume V1 is 10 L. We are asked to find the final pressure P2 when the volume increases to 20 L.

we can rearrange the equation to solve for P2:

P2 = (P1V1/T1) x (T2/V2)

Since the temperature is constant, we can deduce the equation to:

P2 = (P1V1)/V2

Deducing the values we have:

P2 = (760 mmHg x 10 L)/20 L

P2 = 380 mmHg

That implies, the new gas pressure will be 380 mmHg when the volume increases to 20 L.

To know more about Combined gas equation:

https://brainly.com/question/17254541?referrer=searchResults

Answer:

True

Explanation:

If the recipe requires 2 cups of milk and 1 cup of cocoa mix to make three servings of hot chocolate, it means that the ratio of milk to cocoa mix is 2:1. This ratio is important to maintain the taste and consistency of the hot chocolate. If you only have 1 cup of each, you cannot make hot chocolate as the ratio is not correct. You would need 2 cups of milk and 1 cup of cocoa mix to make three servings of hot chocolate maintaining the ratio of 2:1.

An increase in plasma [H+] leads to increased respiration due to the presence of chemoreceptors in the body that detect changes in pH levels. When there is an increase in [H+] in the plasma, these chemoreceptors are activated and send signals to the respiratory centers in the brainstem.

These signals cause an increase in the rate and depth of respiration, resulting in hyperventilation. The purpose of this response is to increase the elimination of carbon dioxide (CO2) from the body, as CO2 reacts with water in the blood to form H+ ions.

By increasing respiration, the body can expel excess CO2 and reduce the concentration of H+ in the plasma, thus restoring pH balance. This process is critical for maintaining homeostasis in the body and ensuring proper cellular function.

To know more about chemoreceptors refer here:

https://brainly.com/question/13257699#

#SPJ11

The color bands painted on munitions are used to identify the type of explosive or chemical agent contained within. These color codes are standardized across military organizations and are used to ensure that munitions are handled and used safely and effectively.

For example, a red band on a bomb typically indicates a high explosive payload, while a yellow band may indicate a chemical weapon. Different colors and combinations of colors may be used to indicate specific types of explosives or chemicals, such as smoke grenades or tear gas canisters.

It is important to note that these color codes may vary slightly between different countries and organizations, so it is important for military personnel and others handling munitions to receive proper training on how to read and interpret the color codes. Failure to properly identify and handle munitions can have serious consequences, including injury or death to those handling the munitions or civilians in the surrounding area.

Overall, the color bands painted on munitions serve as a critical safety measure, helping to ensure that these powerful and potentially dangerous weapons are handled and used in a safe and responsible manner.

For more such questions on Munitions.

https://brainly.com/question/30338820#

#SPJ11

During the conversion of 3-phosphoglycerate to 2-phosphoglycerate, a molecule of water is removed. Therefore, besides the conversion of the phosphoryl group from the third carbon to the second carbon, one molecule of water is also produced. This is a dehydration or elimination reaction, where water is lost from the substrate.

During the conversion of 3-phosphoglycerate to 2-phosphoglycerate in the glycolysis pathway, a high-energy phosphate group is transferred from the 3-carbon molecule to an ADP molecule, resulting in the formation of ATP.

This process is called substrate-level phosphorylation and is a type of ATP synthesis that occurs without the involvement of the electron transport chain or chemiosmosis.

The addition of a phosphate group to ADP generates ATP, which is the energy currency of the cell and is used for various energy-requiring processes.

Therefore, the conversion of 3-phosphoglycerate to 2-phosphoglycerate not only generates a new intermediate molecule but also produces ATP, which is essential for cellular metabolism.

For more question on conversion click on

https://brainly.com/question/17739692

#SPJ11

The empirical formula for the hydrocarbon is C[tex]^{5}[/tex]H[tex]^{4}[/tex] when 0.1850 g of a certain hydrocarbon is combusted.

To determine the empirical formula for the hydrocarbon, first let's find the moles of carbon (C) and hydrogen (H) in the hydrocarbon based on the masses of carbon dioxide (CO[tex]^{2}[/tex]) and water (H[tex]^{2}[/tex]O) produced:

- For CO[tex]^{2}[/tex]: 0.6353 g CO[tex]^{2}[/tex] * (1 mol CO2 / 44.01 g CO[tex]^{2}[/tex]) * (1 mol C / 1 mol CO2) = 0.0144 mol C
- For H[tex]^{2}[/tex]O: 0.1040 g H[tex]^{2}[/tex]O * (1 mol H[tex]^{2}[/tex]O / 18.02 g H[tex]^{2}[/tex]O) * (2 mol H / 1 mol H2O) = 0.0115 mol H

Now, we will determine the mole ratio of C and H in the hydrocarbon:

- Divide each value by the smallest value: 0.0144 mol C / 0.0115 mol H = 1.25
- Since we need whole number ratios, multiply both values by 4: 1.25 * 4 = 5

Based on the mole ratio, the empirical formula for the hydrocarbon is C[tex]^{5}[/tex]H[tex]^{4}[/tex].

More on hydrocarbons: https://brainly.com/question/28569436

#SPJ11

An atom of radium has 138 neutrons in its nucleus.

Radium is a radioactive element with a mass number of 226 and an atomic number of 88. The atomic number of an element is the number of protons in its nucleus, which is also equal to the number of electrons in its neutral state. Therefore, radium has 88 protons and 88 electrons.

The mass number of an element is the sum of the number of protons and neutrons in its nucleus. Since radium has a mass number of 226, we can calculate the number of neutrons by subtracting the atomic number (number of protons) from the mass number.

Thus, the number of neutrons in an atom of radium can be calculated as:

Number of neutrons = Mass number - Atomic number
= 226 - 88
= 138

Therefore, the number of neutrons present in an atom of radium is 138.

Neutrons are neutral particles found in the nucleus of an atom alongside positively charged protons. The presence of neutrons is essential for the stability of the nucleus and can also affect the chemical properties of an element. In the case of radium, the high number of neutrons in its nucleus contributes to its radioactivity and unstable nature.

For more such questions on neutrons, click on:

https://brainly.com/question/28715575

#SPJ11

The temperature, pressure, and volume are not necessarily the same for each component of a mixture of nitrogen and oxygen stored in a tank. This is because gases have the ability to mix homogeneously and behave independently of each other, and their properties depend on their individual characteristics.

The pressure of a mixture of gases is determined by the total number of gas molecules in the container, while the temperature and volume of the gas mixture are determined by the average kinetic energy and the amount of space available for the gas molecules to move, respectively.

Therefore, it is possible for the temperature, pressure, and volume of nitrogen and oxygen to differ in a mixture, as they may have different molecular weights and exhibit different behaviors under certain conditions.

Overall, the properties of the mixture will depend on the individual properties and quantities of the components in the tank.

To know more about nitrogen refer here:

https://brainly.com/question/19938608#

#SPJ11

[H⁺] = 3 × 10⁻² M = acidic

[H⁺] = 6 × 10⁻¹⁰ M = basic

[H⁺] = 1 × 10⁻⁴ M = acidic

[OH⁻] = 3 × 10⁻⁴ M = basic

The concentration of the H⁺ is as :

[H⁺] = 3 × 10⁻² M

The expression for the pH is as :

pH = - log ([H⁺)

pH = - log ( 3 × 10⁻² )

pH = 1.5 , acidic

The concentration of the H⁺ is as :

[H⁺] = 6 × 10⁻¹⁰  M

The expression for the pH is as :

pH = - log ([H⁺)

pH = - log ( 6 × 10⁻¹⁰  )

pH = 9.2 , basic

The concentration of the H⁺ is as :

[H⁺] =  1 × 10⁻⁴  M

The expression for the pH is as :

pH = - log ([H⁺)

pH = - log (  1 × 10⁻⁴  )

pH = 4, acidic

The concentration of the OH⁻ is as :

[OH⁻] =  3 × 10⁻⁴  M

The expression for the pH is as :

pOH = - log (OH⁻)

pOH = - log (  3 × 10⁻⁴  )

pOH = 3.5

pH = 14 - pOH

pH = 14 - 3.5

pH = 10.5

To learn more about pH here

https://brainly.com/question/29248171

#SPJ4

A chemical change occurs when:  The law states that matter cannot be created or destroyed by ordinary chemical or physical changes, which means that the mass of all the components of a chemical reaction can be measured before and after the change in order prove that the mass is constant. So, keep in mind that the mass of participating products is always the same as the mass of all the reactants.
e. methane gas is burned.

A chemical change involves the formation of new substances with different properties, and in this case, when methane gas (CH4) is burned, it reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). This process is called combustion, and it results in a chemical change due to the formation of new products.

To know more about Combustion:

https://brainly.com/question/13153771

#SPJ11

The frequency of an x-ray wave with the energy of the 2.0 × 10⁻¹⁷ J is the 3.3 × 10⁻¹⁷ Hz.

The expression for the energy is as :

E = h / f

Where,

The E is the energy (J) = 2.0 ×  10⁻¹⁷ J

The h is the Planck's Constant = 6.626 ×  10⁻³⁴ J.s

The f is the frequency (Hz) = ?

The frequency is as :

(2.0 ×  10⁻¹⁷ J) = (6.626 ×  10⁻³⁴ J × s) / f        

(2.0 ×  10⁻¹⁷ J) ×  f = (6.626 ×  10⁻³⁴ J × s)        

The frequency, f = 3.3 ×  10⁻¹⁷ Hz                

Thus, The frequency for the x-ray wave and the energy of the 2.0 ×  10⁻¹⁷  J is 3.3×  10⁻¹⁷ Hz.

To learn more about frequency here

https://brainly.com/question/30849682

#SPJ4