the carbon atom bonded to both the ring oxygen atom and a hydroxyl group is known as the

Suppose that CH4 reacts completely with O2 to form CO2 and H20 with a total pressure of 1.2 torr. The partial pressure of H20 is c. 0.8 torr

We must first understand the balanced chemical equation for this reaction: CH4 + 2O2 → CO2 + 2H2O
This equation shows that for every mole of CH4, 2 moles of H2O are produced. When CH4 reacts completely, the mole ratio of CH4 to H2O is 1:2.
Since the total pressure of the system is given as 1.2 torr, we can now determine the partial pressures of CO2 and H2O using the mole ratios.

The partial pressure of H2O is twice that of CO2, so let the partial pressure of CO2 be x and that of H2O be 2x.
x + 2x = 1.2 torr
3x = 1.2 torr
x = 0.4 torr
The partial pressure of H2O is 2x, so: 2 * 0.4 torr = 0.8 torr
Therefore, the partial pressure of H2O is 0.8 torr, which corresponds to option (c) in the given choices.

learn more about partial  pressure here:

https://brainly.com/question/30668745

#SPJ11

By considering interventions in the below areas, the model aims to improve the quality of life and independence for individuals with disabilities or mobility impairments.

Within the given model, intervention can be considered in the following areas:

1. Adapted procedures: This involves modifying or adjusting existing techniques and procedures to meet the specific needs of an individual.

2. Adaptive devices: These are tools or equipment that help individuals with disabilities perform tasks more easily and independently, such as large print keyboards, text-to-speech software, or grab bars in the bathroom.

3. Upper extremity orthotics: These are devices worn on the upper limbs (arms, wrists, or hands) to provide support, improve function, and reduce pain caused by injuries or disabilities.

4. Wheelchairs: A wheelchair is a mobility device used to assist individuals with limited mobility due to disabilities or injuries. They come in various types and sizes, depending on the user's specific needs.

5. Ambulatory devices: These are assistive devices designed to help individuals with mobility impairments walk or move more independently, such as crutches, walkers, or canes.

6. Environmental modifications: This involves altering or adapting the physical environment to better accommodate the needs of individuals with disabilities, such as installing ramps, widening doorways, or adding handrails.

To know more about Model:

https://brainly.com/question/30498393

#SPJ11

10.0 mL of 0.10 M NaOH would need to be added to 10.0 mL of 0.10 M HC₂H₃O₂ to prepare a solution with pH = 5.50.

To prepare an acetate buffer solution with pH 5.50, we need to make sure that the concentration of acetate ions (C₂H₃O₂-) and acetic acid (HC₂H₃O₂) in the solution are in a specific ratio, which corresponds to the pKa of acetic acid (4.76) at the desired pH (5.50).

The Henderson-Hasselbalch equation can be used to calculate the required ratio of C₂H₃O₂- to HC₂H₃O₂:

pH = pKa + log([C₂H₃O₂-]/[HC₂H₃O₂])

Substituting the values for pH and pKa, we get:

5.50 = 4.76 + log([C₂H₃O₂-]/[HC₂H₃O₂])

Solving for [C₂H₃O₂-]/[HC₂H₃O₂], we get:

[C₂H₃O₂-]/[HC₂H₃O₂] = antilog(5.50 - 4.76) = 3.55

So, for every molecule of acetic acid, there must be 3.55 molecules of acetate ions in the solution.

Now, let's consider the reaction between HC₂H₃O₂ and NaOH:

HC₂H₃O₂ + NaOH → NaC₂H₃O₂ + H2O

The balanced equation shows that for every mole of HC₂H₃O₂ that reacts with NaOH, one mole of NaC₂H₃O₂ is formed.

Since we know the initial concentration of HC₂H₃O₂ and the desired concentration of acetate ions in the final buffer solution, we can calculate the amount of NaOH needed to react with the excess acetic acid to produce the desired amount of acetate ions.

First, we calculate the number of moles of HC₂H₃O₂ present in 10.0 mL of 0.10 M solution:

moles of HC₂H₃O₂ = Molarity x volume (in liters) = 0.10 x 0.010 = 0.001 mol

Since we need a ratio of 1:3.55 of HC₂H₃O₂  to C₂H₃O₂-, we calculate the number of moles of C₂H₃O₂- needed:

moles of C₂H₃O₂- = 3.55 x 0.001 = 0.00355 mol

To form 0.00355 moles of NaC₂H₃O₂, we need to react the excess HC₂H₃O₂ with an equal amount of NaOH.

The amount of NaOH needed can be calculated using the following equation:

moles of NaOH = moles of HC₂H₃O₂ = 0.001 mol

Finally, we can calculate the volume of 0.10 M NaOH required:

Volume of NaOH = moles of NaOH / Molarity = 0.001 mol / 0.10 M = 0.010 L = 10 mL

to know more about buffer refer here:

https://brainly.com/question/22821585#

#SPJ11

In the reaction between methane and chlorine, the bond between chlorine is broken homolytically, meaning that each atom in the bond gets one of the electrons from the bond, forming two free radicals (Cl.).

The reaction between methane and chlorine involves homolytic fission and Cl- radicals. In this reaction, the Cl-Cl bond undergoes homolytic fission, where the bond breaks evenly, and each chlorine atom receives one electron, forming two Cl- radicals. These radicals then react with methane, ultimately leading to the formation of chloromethane and other products.

To know more about Homolytic Fission:

https://brainly.com/question/30926611

#SPJ11

Prevention and maintenance are key aspects of maintaining optimal musculoskeletal health. To prevent deformity, it is important to maintain proper posture and alignment during activities of daily living and exercise. Regular stretching and strengthening exercises can help maintain existing capacity for motion.

In cases where diminished capacities for motion, strength, and endurance are present, restoration becomes the focus. Physical therapy and rehabilitation programs can help improve these deficits, restoring functional abilities and enhancing overall quality of life.
In some cases, compensation may be necessary to adapt for limited motion. This can involve modifying activities or using assistive devices to improve function and reduce the risk of further injury. Ultimately, a proactive approach to musculoskeletal health can help individuals maintain optimal function and mobility throughout their lives.

Learn more about physical therapy here, https://brainly.com/question/29368348

#SPJ11

The idea that enzymes undergo conformational changes upon substrate binding in order to bring specific functional groups into the correct catalytic orientation is described as the induced-fit model. T

his model proposes that the shape of the enzyme's active site is not perfectly complementary to the substrate's shape, but rather that the binding of the substrate induces a conformational change in the enzyme that allows for optimal interaction and catalysis.

This model is in contrast to the lock-and-key model, which suggests that the enzyme's active site is rigid and complementary to the substrate's shape, and the transition-state model, which proposes that the enzyme stabilizes the transition state of the reaction rather than the substrate itself.

To know more about transition-state model :

https://brainly.com/question/31561117

#SPJ11

The AT : GC ratio and the length of the DNA duplex both play a role in determining its melting temperature. A higher AT : GC ratio results in weaker hydrogen bonding and a lower melting temperature, while a longer DNA duplex requires more energy to melt and has a higher melting temperature.

The AT : GC ratio refers to the number of adenine-thymine and guanine-cytosine base pairs in a DNA molecule. The ratio can affect the stability of the DNA duplex and its melting temperature.

A higher AT : GC ratio results in weaker hydrogen bonding between the base pairs, leading to a lower melting temperature. On the other hand, a lower AT : GC ratio leads to stronger hydrogen bonding, resulting in a higher melting temperature.

Additionally, the length of the DNA duplex also affects its melting temperature. Longer DNA molecules require more energy to melt, leading to a higher melting temperature. Therefore, a shorter duplex with a higher AT : GC ratio may melt at a lower temperature than a longer duplex with a lower AT : GC ratio.

For more such questions on hydrogen bonding, click on:

https://brainly.com/question/24317372

#SPJ11

An important chemical compound with the molecular formula C₆H₆ which is composed of six carbon and six hydrogen atoms is known as benzene. It is an important hydrocarbon. It is a colourless liquid and has an aromatic odour.

Benzene reacts with bromine molecules in the presence of ferric bromide or aluminium chloride to form bromobenzene. Here aluminium chloride acts as the catalyst. Bromobenzene is the mono substituent compound of benzene.

Bromobenzene is a clear, colourless liquid with a pleasant odor. It is used as a solvent and motor oil additive.

The reaction can be shown as below:

C₆H₆ + Br₂ → C₆H₅Br

To know more about benzene, visit;

https://brainly.com/question/31321675

#SPJ4

The given grxn is not enough to support or not support the net ionic equation that shows  [tex]BaCl_2[/tex] will spontaneously precipitate when 1.0 M solutions of Ba and Cl are mixed.

When a 1.0 M solution of barium ions (Ba²⁺) and a 1.0 M solution of chloride ions (Cl⁻) are mixed, the following reaction occurs:

Ba²⁺(aq) + 2Cl⁻(aq) →  [tex]BaCl_2[/tex](s)

This is the molecular equation representing the formation of barium chloride ( [tex]BaCl_2[/tex]) precipitate when the two solutions are combined. To find the net ionic equation, we can split the molecular equation into individual ions:

Ba²⁺(aq) + 2Cl⁻(aq) → Ba²⁺(aq) + 2Cl⁻(aq) + [tex]BaCl_2[/tex](s)

Since the Ba²⁺ and 2Cl⁻ ions appear on both sides of the equation, they are considered spectator ions and can be removed, leaving us with the net ionic equation:

Ba²⁺(aq) + 2Cl⁻(aq) → [tex]BaCl_2[/tex] (s)

The given reaction supports the net ionic equation as it illustrates the formation of a solid precipitate ( [tex]BaCl_2[/tex]) when the solutions containing Ba²⁺ and Cl⁻ ions are mixed. Spontaneous precipitation occurs due to the low solubility of  [tex]BaCl_2[/tex] in water, which leads to the formation of a solid when the ions reach a certain concentration.

The net ionic equation emphasizes the key reaction participants and demonstrates the formation of the  [tex]BaCl_2[/tex] precipitate, validating the assertion that  [tex]BaCl_2[/tex] will spontaneously precipitate when 1.0 M solutions of Ba and Cl are mixed.

To know more about grxn refer here:

https://brainly.com/question/31276975#

#SPJ11

The orbital hybridization on the central atom for a molecule with a square pyramidal molecular geometry is sp3d. This hybridization occurs when a central atom has five hybrid orbitals that are used to form bonds with other atoms.

In the case of square pyramidal geometry, the central atom is surrounded by five ligands and one lone pair, resulting in a trigonal bipyramidal arrangement.

The hybridization process involves the mixing of the central atom's s, p, and d orbitals to form five hybrid orbitals with equivalent energy levels. These hybrid orbitals have different orientations in space, with three orbitals arranged in a trigonal plane and two orbitals oriented perpendicular to the plane.

The five hybrid orbitals then overlap with the ligand orbitals to form five σ bonds. The lone pair occupies one of the hybrid orbitals, resulting in a square pyramidal molecular geometry.

This type of hybridization is common in molecules with a coordination number of five and results in strong and stable bonding between the central atom and its ligands.

To know more about orbital hybridization refer here:

https://brainly.com/question/9810726#

#SPJ11

We can estimate the probabilities of forming certain elements based on fission product yield distributions while it is not possible to precisely predict the elements that will form from a specific U-235 fission reaction with one neutron.

When a Uranium-235 atom (U-235) absorbs a neutron, it undergoes nuclear fission, which is a process where the nucleus splits into smaller nuclei, releasing energy and additional neutrons. The resulting elements formed from this reaction are called fission products.

Predicting the exact elements that will be formed from a specific fission reaction involving U-235 and one neutron is not straightforward. This is because the fission process is probabilistic, meaning the formation of specific elements is based on probabilities, not certainties.

However, scientists have identified certain fission product yield distributions, which give an idea of the likelihood of forming specific elements from the fission of U-235. These yield distributions are obtained through experimental data and theoretical models.

In summary, while it is not possible to precisely predict the elements that will form from a specific U-235 fission reaction with one neutron, we can estimate the probabilities of forming certain elements based on fission product yield distributions.

More on elements: https://brainly.com/question/24666920

#SPJ11

A reducing sugar is any sugar that is capable of acting as a reducing agent.

Reducing sugars are those sugars that function as reducing agents. They either comprise a ketonic C = O or an aldehyde (- CHO). Except for sucrose, all monosaccharides and disaccharides—such as glucose, fructose, lactose, etc.—are reducing sugars. They weaken Tollen's reagent and Fehling solution. A sugar with free aldehyde or ketone functional groups in its molecular structure that acts as a reducing agent.

Reducing sugars are carbohydrates with a free carbonyl group that have the capacity to reduce solutions of different metallic ions.

learn more about Reducing sugars

https://brainly.com/question/813923

#SPJ1

a) 1.875 grams of AgNO₃ are formed. b) 25 mL of the 0.100 M NaOH are needed to consume all of the AgNO₃.

a) To calculate the amount of AgNO₃ that is formed, we need to first determine which reactant is limiting. From the balanced equation, we can see that the stoichiometric ratio between AgNO₃ and NaOH is 2:2 or 1:1. Therefore, whichever reactant is present in the smallest amount will limit the amount of product that can be formed.

The number of moles of AgNO₃ present in 50 mL of 0.150 M solution is:

0.050 L x 0.150 mol/L = 0.0075 mol AgNO₃

The number of moles of NaOH needed to react with all of the AgNO₃ is:

0.0075 mol AgNO₃ x 1 mol NaOH / 1 mol AgNO₃ = 0.0075 mol NaOH

The mass of AgNO₃ formed is:

0.0075 mol AgNO₃ x 2 mol AgNO₃ / 2 mol NaOH x 169.87 g/mol AgNO₃ = 1.875 g AgNO₃

b) To calculate the volume of 0.100 M NaOH needed to consume all of the AgNO₃, we can use the same stoichiometric ratio as in part a:

0.0075 mol NaOH x 1 L / 0.100 mol = 0.075 L = 75 mL

Therefore, 25 mL of the 0.100 M NaOH are needed.

To know more about balanced equation, refer here:
https://brainly.com/question/12192253#
#SPJ11

A chemical change occurs when:  The law states that matter cannot be created or destroyed by ordinary chemical or physical changes, which means that the mass of all the components of a chemical reaction can be measured before and after the change in order prove that the mass is constant. So, keep in mind that the mass of participating products is always the same as the mass of all the reactants.
e. methane gas is burned.

A chemical change involves the formation of new substances with different properties, and in this case, when methane gas (CH4) is burned, it reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O). This process is called combustion, and it results in a chemical change due to the formation of new products.

To know more about Combustion:

https://brainly.com/question/13153771

#SPJ11

If there is a decrease in serum [HCO₃⁻], it is called metabolic acidosis.

The respiratory system can compensate for this by increasing the rate and depth of breathing, which leads to a decrease in arterial pCO₂. This decrease in pCO₂ shifts the bicarbonate buffer system equation to the right, favoring the formation of HCO₃⁻, which can help to counteract the metabolic acidosis.

However, this compensation is limited and can only partially correct the pH imbalance. Treatment of metabolic acidosis depends on the underlying cause, but may involve addressing any electrolyte imbalances, administering bicarbonate, or treating the underlying disease or condition that is causing the acidosis.

To know more about metabolic acidosis, refer here:
https://brainly.com/question/9239255#
#SPJ11

Answer:

The gas law that applies in this scenario is Boyle's law, which states that the pressure of a gas is inversely proportional to its volume at constant temperature.

Using Boyle's law equation:

P₁V₁ = P₂V₂

where P₁ is the initial pressure, V₁ is the initial volume, P₂ is the final pressure, and V₂ is the final volume.

Plugging in the given values:

P₁ = 760 mmHg

V₁ = 10 L

V₂ = 20 L

Solving for P₂:

P₂ = P₁V₁/V₂ = 760 mmHg x 10 L / 20 L = 380 mmHg

Therefore, the new gas pressure will be 380 mmHg

By using the combined gas law, which states that the pressure, volume, and temperature of a gas are related by the equation:

P1V1/T1 = P2V2/T2

where:

P1 =initial pressure

V1 =initial volume

P2 and V2 are the final pressure and volume, respectively.

We are given that the initial pressure P1 is 760 mmHg and the initial volume V1 is 10 L. We are asked to find the final pressure P2 when the volume increases to 20 L.

we can rearrange the equation to solve for P2:

P2 = (P1V1/T1) x (T2/V2)

Since the temperature is constant, we can deduce the equation to:

P2 = (P1V1)/V2

Deducing the values we have:

P2 = (760 mmHg x 10 L)/20 L

P2 = 380 mmHg

That implies, the new gas pressure will be 380 mmHg when the volume increases to 20 L.

To know more about Combined gas equation:

https://brainly.com/question/17254541?referrer=searchResults

The filler in GP bombs can vary, but common ones include metal shrapnel for blast and fragmentation, incendiary materials for fire, or chemical agents for a chemical effect.

GP bombs, also known as general-purpose bombs, are a type of explosive weapon commonly used in military operations. These bombs typically contain a mixture of high explosives and fillers, which are materials that are used to enhance the bomb's effectiveness and increase its destructive power.

The type of filler used in GP bombs can vary depending on the specific application and the desired effect. Some common fillers used in GP bombs include metal shrapnel, which is intended to produce a blast and fragmentation effect, and incendiary materials such as thermite or napalm, which are designed to produce a fire or burn effect.

Learn more about  GP bombs

https://brainly.com/question/31606134

#SPJ4

Within the cell undergoing anaerobic metabolism of the glucose, fermentation occurs in the A) fluid portion of the cytoplasm. The correct option is A.

The fermentation of the lactic acid and the lactate fermentation is the  anaerobic process which will takes place in the cytoplasm in the cells. In the anaerobic process, then the enzyme will converts of the pyruvic acid produced in the glycolysis in the three-carbon molecule and this is called the lactic acid.

The most of the aerobic respiration that is with the oxygen and it takes place in the mitochondria cell, and the anaerobic respiration that is without the oxygen it will takes place with in the cytoplasm. The option A is correct.

To learn more about fermentation here

https://brainly.com/question/13553990

#SPJ4

To determine whether the average percent mass of CaCO3 in Miranda's antacid tablet is within the commercially accepted range, it would be necessary to know that range and to compare it to Miranda's results.

What is Antacids?

Antacids are a class of drugs used to treat symptoms associated with excess stomach acid production, such as heartburn, indigestion, and acid reflux. They work by neutralizing the acid in the stomach, thereby reducing the irritation and discomfort associated with these conditions.

However, it is important to note that the percent recovery of CO2 and the percent mass of CaCO3 are not necessarily the same thing. The percent recovery of CO2 refers to the percentage of the theoretical yield of CO2 that was actually obtained in the experiment.

Learn more about Antacids

https://brainly.com/question/5328009

#SPJ1

Entropy-driven effects, not enthalpy-driven ones, are principally responsible for the tendency of hydrophobic residues to occupy the inside of proteins.

A thermodynamic term called enthalpy is used for the heat flow or content of a system under a constant pressure. The definition of this substance, which goes by the symbol H, is the total of a system's internal energy plus the sum of its volume and pressure. Enthalpy is a state-dependent operation, which implies that it only depends on the system's initial as well as final states and not on the route used to change between them. Due to its usefulness in thermodynamics, which enables us to determine how much heat is taken in or released.

To know more about Enthalpy visit :

https://brainly.com/question/16720480

#SPJ1

The temperature, pressure, and volume are not necessarily the same for each component of a mixture of nitrogen and oxygen stored in a tank. This is because gases have the ability to mix homogeneously and behave independently of each other, and their properties depend on their individual characteristics.

The pressure of a mixture of gases is determined by the total number of gas molecules in the container, while the temperature and volume of the gas mixture are determined by the average kinetic energy and the amount of space available for the gas molecules to move, respectively.

Therefore, it is possible for the temperature, pressure, and volume of nitrogen and oxygen to differ in a mixture, as they may have different molecular weights and exhibit different behaviors under certain conditions.

Overall, the properties of the mixture will depend on the individual properties and quantities of the components in the tank.

To know more about nitrogen refer here:

https://brainly.com/question/19938608#

#SPJ11

The frequency of an x-ray wave with the energy of the 2.0 × 10⁻¹⁷ J is the 3.3 × 10⁻¹⁷ Hz.

The expression for the energy is as :

E = h / f

Where,

The E is the energy (J) = 2.0 ×  10⁻¹⁷ J

The h is the Planck's Constant = 6.626 ×  10⁻³⁴ J.s

The f is the frequency (Hz) = ?

The frequency is as :

(2.0 ×  10⁻¹⁷ J) = (6.626 ×  10⁻³⁴ J × s) / f        

(2.0 ×  10⁻¹⁷ J) ×  f = (6.626 ×  10⁻³⁴ J × s)        

The frequency, f = 3.3 ×  10⁻¹⁷ Hz                

Thus, The frequency for the x-ray wave and the energy of the 2.0 ×  10⁻¹⁷  J is 3.3×  10⁻¹⁷ Hz.

To learn more about frequency here

https://brainly.com/question/30849682

#SPJ4

The pH of the buffer is 3.74. The answer is (c).

To calculate the pH of a buffer solution, we need to use the Henderson-Hasselbalch equation, which is given by pH = pKₐ + log([A⁻]/[HA]), where pKₐ is the negative logarithm of the acid dissociation constant (Kₐ) of the weak acid, [A⁻] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

In this case, formic acid is the weak acid (HA) and potassium formate is the conjugate base (A⁻). The Kₐ value of formic acid is given as 1.8 x 10⁻⁴.

Substituting the given values into the Henderson-Hasselbalch equation, we get:

pH = pKₐ + log([A⁻]/[HA])

pH = -log(1.8 x 10⁻⁴) + log(0.080/0.120)

pH = 3.74

Therefore, the pH of the buffer solution is 3.74, which corresponds to option (c).

To know more about buffer, refer here:
https://brainly.com/question/30777612#
#SPJ11

Answer:

True

Explanation:

If the recipe requires 2 cups of milk and 1 cup of cocoa mix to make three servings of hot chocolate, it means that the ratio of milk to cocoa mix is 2:1. This ratio is important to maintain the taste and consistency of the hot chocolate. If you only have 1 cup of each, you cannot make hot chocolate as the ratio is not correct. You would need 2 cups of milk and 1 cup of cocoa mix to make three servings of hot chocolate maintaining the ratio of 2:1.

The correct option is (a) 1,000,000ºK.

The temperature of the Sun's corona is most nearly equal to option (a) 1,000,000ºK. The corona is the outermost layer of the Sun's atmosphere and is composed of highly ionized gas. The temperature of the corona is much higher than the temperature of the Sun's visible surface (the photosphere), which has a temperature of about 5,500 ºC (or 5,800 ºK). The reason for the high temperature of the corona is still not fully understood, but it is thought to be related to the Sun's magnetic field and the transfer of energy from the Sun's interior to its outer atmosphere.

Click the below link, to learn more about Sun's temperature:

https://brainly.com/question/31543478

#SPJ11

In each variant, the substitution that took place changed the side chain at the affected position in a specific way depending on the nature of the substituent.

For example, a substitution of a polar amino acid with a non-polar amino acid would result in a change from a hydrophilic to a hydrophobic side chain, while a substitution of an acidic amino acid with a basic amino acid would change the charge of the side chain from negative to positive.

Similarly, substitutions involving aromatic amino acids would lead to changes in the size and shape of the side chain, while substitutions involving sulfur-containing amino acids would affect the ability of the side chain to form disulfide bonds.

To know more about disulfide bonds :

https://brainly.com/question/30512926

#SPJ11

According to the calculated equilibrium constant, at equilibrium, they're mostly products because Kc is bigger than 1.

When the rates of the forward and backward reactions are identical, equilibrium is attained. In equilibrium, the concentrations of each reactant and product are both constant.

Chemical equilibrium is the condition of a chemical process when both reactants and products are present in concentrations that are stable throughout time. Generally, this condition is reached when the forward reaction and the reverse reaction go forward at the same speed.

To know more about equilibrium constant visit:-

https://brainly.com/question/31321186

#SPJ1

The chemical formula for iodous acid is HIO2(aq). Therefore, the correct option is B).

Iodous acid is a compound containing iodine in its +3 oxidation state, and its chemical formula is HIO2. It is a weak acid that can be prepared by the reaction of iodine with a solution of sulfurous acid (H2SO3).

Iodous acid is a relatively unstable compound that decomposes into iodine and iodate ions in the presence of oxygen. Its salts are called iodites and are typically soluble in water.

Iodous acid is a relatively weak acid with a pKa value of approximately 4.7. It exists as a colorless or yellowish aqueous solution and can react with strong reducing agents to form iodine.

When iodous acid reacts with water, it undergoes a disproportionation reaction, producing iodate ions (IO3-) and iodide ions (I-).

Iodous acid is a relatively unstable compound and can be decomposed by heat, light, and air. In the presence of oxygen, iodous acid decomposes into iodate ions and iodine, which can then further react to form iodide ions:

2 HIO2 + O2 → 2 HIO3

HIO3 + 5 H2SO3 → 3 H2SO4 + HIO3 + H2O

HIO3 + 5 H2S → 3 H2O + HIO3 + 5 S

learn more about iodous acid here:

https://brainly.com/question/31357314?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

Answer: False

Explanation:

false

True. The limiting reactant is the reactant that is completely consumed in a chemical reaction, limiting the amount of product that can be formed. In this case, the recipe calls for 2 cups of flour and 1 egg to make 4 muffins.

Therefore, if you have 5 cups of flour and plenty of blueberries, the flour is not limiting the reaction since you have more than enough. However, you only have 3 eggs, which is less than the amount needed to make 4 muffins according to the recipe.

This means that the eggs are the limiting reactant in this scenario, as you cannot make more muffins than the amount of eggs you have. Therefore, you will be limited to making only 3 muffins with the given amount of eggs, even if you have excess flour and blueberries.

To know more about limiting reactant, refer here:

https://brainly.com/question/14225536#

#SPJ11