Answer:
a. to provide a graphical user interface (GUI) and several capture filters
Explanation:
TcPDump is a command line tool used to capture packets. TcPDump is used to filter packets after a capture has been done. To control network interfaces, TcPDump need to be assigned root privileges. Data is represented in form of text
Wireshark provide a graphical user interface (GUI) and several capture filters. It is a graphical tool used in packet capture analysis. Data is represented in wireshark as text in boxes.
The beginning of a free space bitmap looks like this after the disk partition is first formatted: 1000 0000 0000 0000 0000 0000 0000 0000 (the first block is used by the root directory). The system always searches for free blocks starting at the lowest numbered block, so after writing file A, which uses 8 blocks, the bitmap looks like this 1111 1111 1000 0000 0000 0000 0000 0000. Show the bitmap after each of the following actions: (a) File B is written, using 12 blocks (b) File C is written, using 7 blocks (c) File A is deleted (d) File B is deleted (e) File D is written, using 6 blocks (f) File E is written, using 9 blocks Show all steps.
The bitmap is 1110 0000 0001 0000 after some use. The system always looks for free blocks beginning using a contiguous allocation technique.
What is a bitmap?After some use, the new bitmap is 1110 0000 0001 0000. The system employs a contiguous allocation mechanism and starts searching for free blocks at the position.
(a) File B is made up of five blocks, 1111 1111 1111 0000.
b) The batch number 1000 0001 1111 0000 deletes File A.
c) Eight blocks are used for writing in file C.
1111 1111 1111 1100
File B is deleted (d). 1111 1110 0000 1100
Free-space bitmaps are one method used by some file systems to keep track of allocated sectors. Even though the most fundamental implementation of free-space bitmaps is incredibly wasteful, some modern file systems use complex or hybrid versions of them.
Therefore, after some use, the bitmap is 1110 0000 0001 0000. The contiguous allocation strategy is always used by the system to look for free blocks to start with.
To learn more about bitmap, refer to the link:
https://brainly.com/question/26230407
#SPJ2
I need the answer to the below question *ASAP*
2 4 9
Explanation:
Basically what I thought was the way was, since 2 is first, then its 1, then since 4 is second, it's added second, lastly to get the last oneI added them all and got 9 so that's third.
Answer:
Does not exist.
Explanation:
The answer is not in the option:
Let's analyse the code:
random.randint(2,4)
This means take in random integer numbers starting with 2 and ending with 4.
Meaning numbers : 2, 3 and 4
Next math.pow(a,2) means a× a = a2
So when we input 2 the function;
math.pow(a,2) returns an integer 4
You do same for input 3 , it returns 9.
For input 4 it returns 16.
And the result is encapsulated in the function string(). Meaning display the result as a string:
4 9 16
The following if statement uses an overloaded > operator to determine whether the price of a Car object is more than $5000. Car is a struct and myCar is an object of Car. Each Cor object has two variables: id (int) and price (float). As you can see in the following code, the ID of myCar is 12345 and the price is $6,000. Car myCar - [12345, 6000.); float price - 5000; if (myCar > price) cout << "My car price is more than $5,000/n": Which one of the following function prototypes is correct syntax to overload the > operator based on the if statement above. void operator> float price: O bool operator>(Car & car, float price): bool operator (float amt): bool operator> Car & your Car): None of the above
Answer:
The correct syntax to overload is bool operator (float amt): so, the third statement is right.
Explanation:
Solution
From the given question we have to find which statements is correct for the following function prototype.
Now,
Since the price of a Car object is above $5000, the car here is considered a struct and myCar is an object of Car
Both Car object consists of two variables which are id (int) and price (float)
Thus, from the given example the corresponding code says that the ID of myCar is represented as follows:
myCar - [12345, 6000);
The float price = 5000
Then,
cout << "My car price is more than $5,000/n"
Therefore the following statement bool operator (float amt): is the right syntax to overload.
You are working at the Acme company that has the following environment: 400 Windows Servers 2. 8000 Windows client devices (laptops running Windows os) 40 Linux servers Active Directory Domain Services to provide dns services to all the hosts, both Windows and Linux. Acme acquires a small research company, Uni-Tech that uses Unix servers for all of its applications. For host resolution they use BIND
a. Describe what BIND is and what the acronym stands for? BIND stands for Berkley Internet Name Domain. BIND allows you to pick one of your computers to act as the DNS server.
b. This acquisition happens very quickly and on day one the business needs people at Uni-Tech to connect to hosts at Acme using hosts names that can be resolved by Active Directory. Describe a method for integrating the two environments that does not require too many individual tasks that will take many hours. (10) Describe how you would test to make sure your integration is working correctly.
Answer: Provided in the explanation section
Explanation:
(a). BIND is a type of DNS server used on the internet, actually it is reported to be most widely used DNS server on the internet. Also BIND is the de-facto standard on Unix like operating systems and Linux. Thus it can be used to locate computers on a network using domain names instead of their IP addresses. BIND was originally programmed at the University of California, Berkeley in the 1980s, this was made possible by a grant from US based DARPA program.
Originally, BIND stood for Berkeley Internet name daemon, but nowadays it is called Berkeley Internet name domain.
(b). In some of the clients in windows and Windows servers we will install LDP. By the LDP.exe we can test tDNS, Active directory woking , even we can add or modify. LDP is used to test and verify the Active Directory objects. We will install in windows machine then open the software, then from the menu we will select connect and type the IP adress of the Active Directory then we will select or type the objects of Active directory. For Linux system we have to openldap and can search the AD.
From Linux or Unix we can use the nmap tool which can test the network connectivity between all the computers whether it is windows or Linux. By nmap we can test by ICMP protocol to verify the network connectivity. By nmap we can scan all the port which are required to open from client to the server. We can also use nslookup to test DNS server from the client. By nslookup we can check that client can connect the server.
If a large organization wants software that will benefit the entire organization—what's known as enterprise application software—the organization must develop it specifically for the business in order to get the functionality required.
Answer:
Hello your question lacks the required options which is : True or False
answer : TRUE
Explanation:
If a large organization wants to develop a software that will benefit the entire organization such software will be known as an enterprise application software and such application software must be developed in such a way that it meets the required purpose for which the organization is designed it for.
An enterprise application software is a computer software developed specially to satisfy the specific needs of an entire organization inside of the individual needs of the people working in the organization.
what is computer aided design
What password did the boss gave to the man?
Answer:
1947
Explanation:
because i dont know
Answer:
where is the password?
Explanation:
Your computer is once again out of hard drive and you want to see which folders are consuming the most space on your drive. Which application below will do this? A. CClreaner B. Treesize C MalwareBytes D. Auslogics Disk Defrag
Answer:
I would say cclrearner
Explanation:
This is what helped me with my computer so it may help you but try which one works for you
Advanced Sounds is engaging in a full upgrade of its Windows Server 2003 network to Windows Server 2008. The upgrade includes using Windows Server 2008 Active Directory. Advanced Sounds has pioneered many technological innovations and is very concerned about keeping its network and computer systems secure. Advanced Sounds Information Technology (IT) Department hires you to help them implement Windows Server 2008 Active Directory. Assume the following:
All email servers have been consolidated back in the New York City Complex.
Most all the other applications running on Windows Servers are distributed at all sixteen locations.
Each location at minimum has a file server, a print server and a local application server.
All locations have adequate Wide Area network connections with available capacity; 10 Mbps links
The New York location has enough network capacity to serve all 16 locations.
There are 500 people at the New Your City complex.
There are 200 people at the Quebec City location and 200 at the Montreal location.
There are 40-50 people at each outlet store.
Advanced Sounds IT Department has formed a small installation planning committee consisting of the IT server operations manager, two system programmers, the current Active Directory administrator, and you. After the first meeting they have asked you to prepare a small report to address the following questions:
A. What information is required as input to the initial installation involving Active Directory? a=
B. How many Active directory servers do you propose?
C. Where will the Active directory server(s) be located?
Answer:
cs
Explanation:
Alcatel-Lucent's High Leverage Network (HLN) increases bandwidth and network capabilities while reducing the negative impact on the environment. This works because the HLN:_____________.
a. Reduces or eliminates use of finite (non-renewable) radio frequencies utilized by wireless devices.
b. Reduces Radio Frequency Interference (RFI) - overcrowding of specific areas of the electromagnetic spectrum.
c. Limits the number of people who can access the network at any one time —particularly during times of peak energy demand.
d. Delivers increased bandwidth using fewer devices and energy.
Answer:
d. Delivers increased bandwidth using fewer devices and energy.
Explanation:
Alcatel-Lucent, formed in 1919 was a French global telecommunications equipment manufacturing company with its headquarter in Paris, France.
They provide services such as telecommunications and hybrid networking solutions deployed both in the cloud and properties.
Alcatel-Lucent's High Leverage Network (HLN) increases bandwidth and network capabilities while reducing the negative impact on the environment. This works because the High Leverage Network (HLN) delivers increased bandwidth using fewer devices and energy on Internet Protocol (IP) networks.
The Alcatel-Lucent's High Leverage Network (HLN) provides reduced cost of transmitting data as fewer network equipments are used with less adverse effects on the environment.
The High Leverage Network (HLN) when successfully implemented helps telecom firms to improve their operational efficiency, maintenance costs, and enhance network performance and capacity to meet the bandwidth demands of their end users.
The degree of a point in a triangulation is the number of edges incident to it. Give an example of a set of n points in the plane such that, no matter how the set is triangulated, there is always a point whose degree is n−1.
Answer:
squarepentagonExplanation:
The vertices of a square is one such set of points. Either diagonal will bring the degree of the points involved to 3 = 4-1.
The vertices of a regular pentagon is another such set of points. After joining the points in a convex hull, any interior connection will create a triangle and a quadrilateral. The diagonal of the quadrilateral will bring the degree of at least one of the points to 4 = 5-1.
Write a C++ program to find if a given array of integers is sorted in a descending order. The program should print "SORTED" if the array is sorted in a descending order and "UNSORTED" otherwise. Keep in mind that the program should print "SORTED" or "UNSORTED" only once.
Answer:
The cpp program for the given scenario is as follows.
#include <iostream>
#include <iterator>
using namespace std;
int main()
{
//boolean variable declared and initialized
bool sorted=true;
//integer array declared and initialized
int arr[] = {1, 2, 3, 4, 5};
//integer variables declared and initialized to length of the array, arr
int len = std::end(arr) - std::begin(arr);
//array tested for being sorted
for(int idx=0; idx<len-1; idx++)
{
if(arr[idx] < arr[idx+1])
{
sorted=false;
break;
}
}
//message displayed
if(sorted == false)
cout<< "UNSORTED" <<endl;
else
cout<< "UNSORTED" <<endl;
return 0;
}
OUTPUT
UNSORTED
Explanation:
1. An integer array, arr, is declared and initialized as shown.
int arr[] = {1, 2, 3, 4, 5};
2. An integer variable, len, is declared and initialized to the size of the array created above.
int len = std::end(arr) - std::begin(arr);
3. A Boolean variable, sorted, is declared and initialized to true.
bool sorted=true;
4. All the variables and array are declared inside main().
5. Inside for loop, the array, arr, is tested for being sorted or unsorted. The for loop executes over an integer variable, idx, which ranges from 0 till the length of the array, arr.
6. The array is assumed to be sorted if all the elements of the array are in descending order.
7. If the elements of the array are in ascending order, the Boolean variable, sorted, is assigned the value false and for loop is exited using break keyword. The testing is done using if statement.
8. Based on the value of the Boolean variable, sorted, a message is displayed to the user.
9. The program can be tested for any size of the array and for any order of the elements, ascending or descending. The program can also be tested for array of other numeric data type including float and double.
10. All the code is written inside the main().
11. The length of the array is found using begin() and end() methods as shown previously. For this, the iterator header file is included in the program.
A vSphere Administrator is receiving complaints a database VM is experiencing performance issues. The VM is a member of the high priority resource pool and the cluster has not experienced contention.
Which condition should be checked to address immediate performance concerns?
A. VM snapshots
B. VMFS version
C. Resource Pool share value
D. Configured CPU shares
Answer:
C. Resource Pool share value.
Explanation:
The vSphere is a term used to describe the VMware’s virtualization cloud platform. The vSphere comprises of the following, vCenter Server, ESXi, Virtual Machine File System (VMFS) and vCenter Client.
If a vSphere Administrator receive complaints that a database Virtual Machine (VM) is experiencing performance issues and the Virtual Machine (VM) is a member of the high priority resource pool and the cluster has not experienced contention.
In order to address immediate performance concerns, the vSphere Administrator should check the Resource Pool share value.
VMware resource pool refers to the aggregated central processing unit and memory allocated to a Virtual Machine (VM) for flexible management of the resources.
Also, the vSphere Administrator should install VMware tools to check which processes are having high CPU usage by using vimtop, as well as checking if vCenter Server is swapping.
Given: The following if statement uses an overloaded > operator to determine whether the price of a Car object is more than $5000. Car is a struct and myCar is an object of Car. Each Car object has two variables: id (int) and price (float). As you can see in the following code, the ID of myCar is 12345 and the price is $6,000.
Car myCar = {12345, 6000.};
float price = 5000;
if (myCar > price)
cout << "My car price is more than $5,000.\n";
Which one of the following function prototypes is correct syntax to overload the > operator based on the if statement above.
a. void operator>(float price);
b. bool operator>(Car& car, float price);
c. bool operator >(float amt);
d. bool operator>(Car& yourCar);
e. none of the above
Answer:
Option(c) is the correct answer to the given question.
Explanation:
In the given question car is the structure and mycar is the instance or the object of the class also the object mycar holds two variables of type integer and the one float variable .
Following are the syntax of operator overload in C++ programming language
return -type operator operator-symbol(datatype variable name )Now according to the question the option(c) follows the correct syntax of operator overload
All the other option do not follow the correct prototype that's why these are incorrect option .
When implementing a physical database from a logical data model, you must consider database performance by allowing data in the database to be accessed more rapidly. In order to increase data availability, the DBA may break up data that are accessed together to be stored together. Which method will improve the performance of this structure when running queries? What are advantages and disadvantages of this method?
Answer:
A method used to improve the performance of structure when running queries is known as Partitioning indexes.
The advantages of partitioning indexes are, It enables data management operations for example, index creation and rebuilding, It increases query performance.
The disadvantages are, one cannot define the primary index of partitioned table to be unique unless the whole partitioning column set is part of the primary index definition.
Explanation:
Solution
Partitioning indexes are known as b -tress indexes that shows hon how to break up the index into separate or different partitions.
Partitioning is usually done to enhance the performance and increased availability. when data are spread over multiple partitions, one can be able to operate on one partition without affecting others. i.e to run utilities, or to take data offline.
Almost all DBMS products support partitioning, but in various ways. we must be sure to know the nuances of an individual a particular DBMS execution before partitioning.
The advantages of Partitioned indexes are as follows:
It enables data management operations for example, index creation and rebuilding
It increases performance of query
It can significantly the impact of schedule downtime for maintenance operations
Disadvantages:
The primary index of partitioned table cannot be described to be unique except if the whole partitioning column set is part of the primary index definition.
What is a manifold on a vehicle
Answer:
the part of an engine that supplies the fuel/air mixture to the cylinders
Explanation:
There is also an exhaust manifold that collects the exhaust gases from multiple cylinders into a smaller number of pipes
A(n) ________ is a server-based operating system oriented to computer networking and may include directory services, network management, network monitoring, network policies, user group management, network security, and other network-related functions.
Answer:
Network Operating System (NOS)
Explanation:
A network operating system (NOS) is an operating system that makes different computer devices connect to a common network in order to communicate and share resources with each other using a server. A network operating system can be used by printers, computers, file sever among others, and they are connected together using a local area network. This local area network which they are connected to works as the server.
The NOS also acts as a network security because it could be used as an access control or even user authentication.
There are two types of NOS
1) Peer to peer network operating system.
2) Client/server network operating system
A network operating system (NOS) is a server-based operating system oriented to computer networking and may include directory services, network management, network monitoring, network policies, user group management, network security, and other network-related functions.
Next, Su wants to explain how the cotton gin separated seeds from cotton. At first, she considers using star bullets for
the steps in this process. But then, she determines that is not the right approach. Which action would most clearly
show the steps in the process in her presentation?
Su should change the type of bullet.
Su should change the size of the bullets.
Su should change the bullets to numbers.
Su should change the color of the bullets.
Answer:
change bullets to numbers
Explanation:
100%
In addition to compiling the list of user access requirements, applications, and systems, the BIA also includes processes that are ____________. These processes safeguard against any risks that might occur due to key staff being unavailable or distracted.
Answer:
automated
Explanation:
Basically a Business Impact Analysis (BIA) estimates and determines the effects of a business activity and process disturbances. These disruptions can be natural or electronic disasters. It also collects information which is used to establish recovery plan. It identifies the business vulnerabilities and works on the strategies in order to reduce such potential hazards. The BIA involves both manual and automated processes. BIA involves automated processes which include the automated software tools that enables the protection of the confidential information of the users and also generates automated reports about the critical business processes.
1. Implement the function dict_intersect, which takes two dictionaries as parameters d1 and d2, and returns a new dictionary which contains only those keys which appear in both d1 and d2, whose values are a tuple of the corresponding values from d1 and d2.
E.g., dict_intersect({'a': 'apple', 'b': 'banana'}, {'b': 'bee', 'c': 'cat'}) should return {'b': ('banana', 'bee')}
2. Implement the function consolidate, which accepts zero or more sequences in the star parameter seqs, and returns a dictionary whose keys consist of values found in those sequences, which in turn map to numbers indicating how many times each value appears across all the sequences.
E.g., consolidate([1,2,3], [1,1,1], [2,4], [1]) should return the dictionary {1: 5, 2: 2, 3: 1, 4: 1}.
Answer:
1
def dict_intersect(d1,d2): #create dictionary
d3={} #dictionaries
for key1,value1 in d1.items(): #iterate through the loop
if key1 in d2: #checking condition
d3[key1]=(d1[key1],d2[key1]) #add the items into the dictionary
return d 3
print(dict_intersect({'a': 'apple', 'b': 'banana'}, {'b': 'bee', 'c': 'cat'})) #display
2
def consolidate(*l1): #create consolidate
d3={} # create dictionary
for k in l1: #iterate through the loop
for number in k: #iterate through the loop d3[number]=d3.get(number,0)+1 #increment the value
return d 3 #return
print(consolidate([1,2,3], [1,1,1], [2,4], [1])) #display
Explanation:
1
Following are the description of program
Create a dictionary i.e"dict_intersect(d1,d2) " in this dictionary created a dictionary d3 .After that iterated the loop and check the condition .If the condition is true then add the items into the dictionary and return the dictionary d3 .Finally print them that are specified in the given question .2
Following are the description of program
Create a dictionary consolidate inside that created a dictionary "d3" .After that iterated the loop outer as well as inner loop and increment the value of items .Return the d3 dictionary and print the dictionary as specified in the given question .
What are the best data structures to create the following items? And why?
1. Designing a Card Game with 52 cards.
2. Online shopping cart (Amazon, eBay, Walmart, Cosco, Safeway, ...)
3. Online waiting list (De Anza College class waiting list, ...)
4. Online Tickets (Flight tickets, concert tickets, ...)
Answer:
The best structures to create the following items are
ARRAYHASHMAPS QUEUE SORTED LINK LISTSExplanation:
The best structures to create the following items are:
Array : for the storage of cards in a card game the best data structure to be used should be the Array data structure. this is because the size of the data ( 52 cards ) is known and using Array will help with the storing of the cards values in the Game.Hashmaps : Hashmap data structure should be implemented in online shopping cart this IS BECAUSE items can be easily added or removed from the cart therefore there is a need to map the Items ID or name to its actual database online waiting list are usually organised/arranged in a first-in-first-out order and this organization is best created using the queue data structure Sorted link lists is the best data structure used to create, store and manage online tickets. the sorted link data structure helps to manage insertions and deletions of tickets in large numbers and it also reduces the stress involved in searching through a large number of tickets by keeping the tickets in sorted listsComplete main() to read dates from input, one date per line. Each date's format must be as follows: March 1, 1990. Any date not following that format is incorrect and should be ignored. Use the substring() method to parse the string and extract the date. The input ends with -1 on a line alone. Output each correct date as: 3/1/1990.
Ex: If the input is:
March 1, 1990
April 2 1995
7/15/20
December 13, 2003
-1
then the output is:
3/1/1990
12/13/2003
Given Code:
import java.util.Scanner;
public class DateParser {
public static int getMonthAsInt(String monthString) {
int monthInt;
// Java switch/case statement
switch (monthString) {
case "January":
monthInt = 01;
break;
case "February":
monthInt = 02;
break;
case "March":
monthInt = 03;
break;
case "April":
monthInt = 04;
break;
case "May":
monthInt = 05;
break;
case "June":
monthInt = 06;
break;
case "July":
monthInt = 07;
break;
case "August":
monthInt = 8;
break;
case "September":
monthInt = 9;
break;
case "October":
monthInt = 10;
break;
case "November":
monthInt = 11;
break;
case "December":
monthInt = 12;
break;
default:
monthInt = 00;
}
return monthInt;
}
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
// TODO: Read dates from input, parse the dates to find the one
// in the correct format, and output in mm/dd/yyyy format
}
}
Using the knowledge in computational language in C++ it is possible to write a code that complete main() to read dates from input, one date per line
Writting the code:#include <iostream>
#include <string>
using namespace std;
int DateParser(string month) {
int monthInt = 0;
if (month == "January")
monthInt = 1;
else if (month == "February")
monthInt = 2;
else if (month == "March")
monthInt = 3;
else if (month == "April")
monthInt = 4;
else if (month == "May")
monthInt = 5;
else if (month == "June")
monthInt = 6;
else if (month == "July")
monthInt = 7;
else if (month == "August")
monthInt = 8;
else if (month == "September")
monthInt = 9;
else if (month == "October")
monthInt = 10;
else if (month == "November")
monthInt = 11;
else if (month == "December")
monthInt = 12;
return monthInt;
}
int main ()
{
// TODO: Read dates from input, parse the dates to find the one
// in the correct format, and output in m/d/yyyy format
while(1)
{
//declaring the required variables
int monthInt,dayInt,yearInt;string input;
//receive the input string frim the user
getline(cin,input);
//if the input is -1 then quit
if(input=="-1")
break;
//else try to process the input
try
{
//find and extract the month name and parse it to monthInt
monthInt=DateParser(input.substr(0,input.find(' ')));
//find and extract the day and parse it to dayInt
dayInt=stoi(input.substr(input.find(' '),input.find(", ")));
//find and extract the year and parse it to yearInt
yearInt=stoi(input.substr(input.find(", ")+1,input.length()));
//display the output
cout<<monthInt<<"/"<<dayInt<<"/"<<yearInt<<endl;
}
//catch if any of the exceptions happens
catch(exception& e){}
}
}
See more about C++ at brainly.com/question/19705654
#SPJ1
Someone help me with this
Answer:
(b) public String doMath(int value){
return " " + (value * 3);
}
Explanation:
Two of the answers doesn't even have a variable to pass into. In order, to return a String the return " " in b will do this. Therefore, I think the answer is b.
You have observed that Alexander Rocco Corporation uses Alika’s Cleaning Company for its janitorial services. The company’s floors are vacuumed and mopped each night, and the trash is collected in large bins placed outside for pickup on Tuesdays and Fridays. You decide to visit the dumpster Thursday evening after the cleaning crew leaves. Wearing surgical gloves and carrying a large plastic sheet, you place as much of the trash on the sheet as possible. Sorting through the material, you find the following items: a company phone directory; a Windows NT training kit; 23 outdated Oracle magazines; notes that appear to be programs written in HTML, containing links to a SQL Server database; 15 company memos from key employees; food wrappers; an empty bottle of expensive vodka; torn copies of several resumes; an unopened box of new business cards; and an old pair of women’s running shoes. Based on this information, write a two-page report explaining the relevance these items have. What recommendations, if any, might you give to Alexander Rocco management?
Answer:
Explanation:
Relevance of Thrown Items:
The thrown items mainly consist of the Windows NT training kit, outdated magazines and some written notes, etc. All these things can be used in the company for training the fresh talent. These things must be used for the purpose of training fresh people and the things like programs written in HTML must not be dumped like this because they consists of the raw code which can be harmful if gotten into wrong hands. Hence, the information like this must be taken care of seriously as these can be loopholes into companies down. Rest of the things like food wrappers, empty bottles, resume copies are all worthless to the company and can be thrown into the dump as soon as possible.The business cards must also be thrown if not important.Recommendation To Management:
The management must take these things seriously and must double check the company properties before throwing them into dump. There must be a committe build to check the things that are been going directly to the dump. They must have the responsibility for checking the things before going to the dump and must filter all the important things from the garbage back to the shelves of the office.Hence, these things must be taken care of so that no harm is to be done to the company.cheers i hope this helped !!
Which component allows you to enjoy cinematic
or 3-D effects on your computer?
A.Cache memory
B.Ethernet port
C.external hard drive
D.video and sound cards
external hard drive
external hard drive
Answer:
Amswer would be D
Explanation:
Write a program that reads a list of words. Then, the program outputs those words and their frequencies. Ex: If the input is: hey hi Mark hi mark the output is: hey 1 hi 2 Mark 1 hi 2 mark 1
Answer:
#Declare variable to get the input
#list from the user
input_list = input()
#split the list into words by space
list = input_list.split()
#Begin for-loop to iterate each word
#to get the word frequency
for word in list:
#get the frequency for each word
frequency=list.count(word)
#print word and frequency
print(word,frequency)
Explanation:
This program that we are told to write will be done by using python programming language/ High-level programming language.
The question wants us to write a program in which the output will be as below;
hey 1
hi 2
Mark 1
hi 2
mark 1
Just by imputing hey hi mark hi mark.
Just copy and run the code below.
#Declare variable to get the input
#list from the user
input_list = input()
#split the list into words by space
list = input_list.split()
#Begin for-loop to iterate each word
#to get the word frequency
for word in list:
#get the frequency for each word
frequency=list.count(word)
#print word and frequency
print(word,frequency)
In this exercise we have to use the knowledge in computational language in python to write the following code:
We have the code can be found in the attached image.
So in an easier way we have that the code is
input_list = input()
list = input_list.split()
for word in list:
frequency=list.count(word)
print(word,frequency)
See more about python at brainly.com/question/18502436
Convert each of the following for loops into an equivalent while loop. (You might need to rename some variables for the code to compile, since all four parts a-d are in the same scope.)
// a.
System.out.println("a.");
int max = 5;
for (int n = 1; n <= max; n++) {
System.out.println(n);
}
System.out.println();
// b.
System.out.println("b.");
int total = 25;
for (int number = 1; number <= (total / 2); number++) {
total = total - number;
System.out.println(total + " " + number);
}
System.out.println();
// c.
System.out.println("c.");
for (int i = 1; i <= 2; i++) {
for (int j = 1; j <= 3; j++) {
for (int k = 1; k <= 4; k++) {
System.out.print("*");
}
System.out.print("!");
}
System.out.println();
}
System.out.println();
// d.
System.out.println("d.");
int number = 4;
for (int count = 1; count <= number; count++) {
System.out.println(number);
number = number / 2;
}
Answer:
~CaptnCoderYankee
Don't forget to award brainlyest if I got it right!
Three examples of parameter-parsing implementation models are: (1)________, (2)________, and (3)________.
Answer:1) Parse-by-value
2) Parse-by-reference
3) Parse-by-name
Explanation: Parameter parsing refers to a communication among procedures or functions.
The values of a variable procedure are transferred to the called procedure by some mechanisms. Different techniques of parameter-parsing include; parse-by-value, parse-by-reference, parse-by-copy restore, parse-by-name.
Write Python code to save the data to a MongoDB collection:Import json module to parse JSON dataImport MongoClient from pymongo to use MongoDBCreate a loop to iterate through the variable with data from Twitter, and for each tweet:Parse these related values: id, text, created_at, user’s screen_name, retweet_count, favorite_count, lang.Use MongoDB’s insert method to add the parsed tweet values to MongoDB collection;Write Python code to query the database:Use find method to search for tweets with lang="en";Use the aggregate method with $sum to compute the total retweets;Use the aggregate method with $count and $group to count the number of tweets by each user (screen_name);
Answer:
Explanation:
The objective of this task is to compute a program that involves the usage of Python code to save the data to MongoDB and to query the database.
Due to the error that occur which makes me to be unable to submit this answer, I've created a word document instead and the attached file can be found below.
Thanks!
For the PSoC chip what is the minimum voltage level in volts that can be considered to logic one?
Answer:
Asian man the man is one 1⃣ in a and the perimeters are not only
