Substances a-d have the following specific heats (j/g-°c):


a = 0.90, b = 1.70, c = 2.70, d = 4.18.


which substance will cool the fastest when equal masses are heated to the same temperature?

The larger tire will have a greater volume, but the amount of air in each tire is the same, so the pressure in both tires will be the same. The correct answer is the option: C.

The pressure of a gas is related to its temperature, volume, and the number of molecules present, according to the Ideal Gas Law: PV = nRT,

Assuming the temperature, number of molecules, and the amount of air in both tires are the same, the pressure of the air in the tires will depend only on the volume of the tires. Therefore, both tires will have the same air pressure. The correct answer is C.

To know more about Ideal Gas Law, here

brainly.com/question/13821925

#SPJ4

--The complete Question is, Assume that you put the same amount of room-temperature air in two tires. if one tire is bigger than the other, how will air pressure in the two tires compare?

A. the bigger tire will have greater air pressure.

B. the smaller tire will have greater air pressure.

C. both tires will have the same air pressure. --

The type of reaction that occurs when you squeeze a cold pack is an exothermic reaction. An exothermic reaction is a chemical reaction that releases energy in the form of heat or light. In this case, the reaction between the chemicals inside the cold pack releases heat, which is transferred to your skin when you apply the pack.

The heat transfer between the cold pack and your skin occurs through conduction. Conduction is the transfer of heat between objects that are in direct contact with each other. When you apply the cold pack to your skin, the heat from your skin is transferred to the cold pack through conduction. As the heat is transferred, the cold pack gets warmer and your skin gets cooler.

The law of conservation of energy applies to this system because energy cannot be created or destroyed, only transferred from one form to another. In this case, the chemical reaction inside the cold pack releases energy in the form of heat, which is transferred to your skin through conduction. As the heat is transferred, the temperature of the cold pack decreases, while the temperature of your skin decreases. However, the total amount of energy in the system remains constant.

In summary, when you apply a cold pack to a twisted ankle, the chemical reaction that occurs is an exothermic reaction. The heat transfer between the cold pack and your skin occurs through conduction, and the law of conservation of energy applies to the system as the total amount of energy remains constant.

To know more about exothermic reaction refer here

https://brainly.com/question/10373907?referrer=searchResults

#SPJ11

To determine the volume of 0.8m NaOH required to titrate 300 ml of 0.6m phosphoric acid, we first need to understand the mole ratio between the two substances. According to the given assumption of a 1:1 mole ratio, one mole of NaOH reacts with one mole of phosphoric acid.

Next, we can calculate the number of moles of phosphoric acid present in the solution by multiplying the molarity (0.6m) by the volume (300ml) and converting to moles using the molecular weight of phosphoric acid. This gives us 0.108 moles of phosphoric acid.

Since the mole ratio is 1:1, we will need 0.108 moles of NaOH to completely titrate the phosphoric acid. To determine the volume of 0.8m NaOH required to provide 0.108 moles, we can use the formula:

moles = molarity x volume (in liters)

Rearranging this equation, we get:

volume (in liters) = moles / molarity

Substituting the values, we get:

volume (in liters) = 0.108 moles / 0.8m = 0.135 liters

Multiplying this by 1000ml/liter, we get the final answer:

Volume of 0.8m NaOH required = 135 ml.

To know more about phosphoric acid refer here

https://brainly.com/question/3700851#

#SPJ11

The pressure produced when the temperature is raised to 600 K is 1.77 atm.

The pressure of a gas is directly proportional to its temperature, according to the ideal gas law. This means that if the temperature of a gas increases, its pressure will increase proportionally, assuming that the volume and number of gas molecules remain constant.

In this problem, we are given the initial pressure of neon gas at 400 K, which is 1.18 atm. We need to find the pressure of the gas when the temperature is raised to 600 K.

To solve this problem, we can use the following formula:

where P₁ is the initial pressure, T₁ is the initial temperature, P₂ is the final pressure, and T₂ is the final temperature.

Substituting the given values, we get:

Therefore, the pressure produced when the temperature is raised to 600 K is 1.77 atm. This means that the pressure of the neon gas increases by a factor of 1.5 when the temperature is increased from 400 K to 600 K.

To learn more about Gay-Lussac's law, here

https://brainly.com/question/1358307

#SPJ4

In chemistry, a chemical reaction can be classified as either endothermic or exothermic based on whether the reaction releases or absorbs energy, respectively. An endothermic reaction is one in which energy is absorbed from the surroundings, resulting in an increase in the internal energy of the system.

The term potential energy refers to the stored energy within a system due to the position or configuration of the particles that make up that system. In the case of a chemical reaction, potential energy is stored within the chemical bonds between atoms and molecules.

In an endothermic reaction, the reactants have less potential energy than the products. This is because energy is required to break the chemical bonds in the reactants, which absorbs energy from the surroundings. As a result, the products have higher potential energy than the reactants because they have absorbed energy from the surroundings during the reaction.

Examples of endothermic reactions include the process of melting ice, where energy is absorbed from the surroundings to break the bonds between water molecules, and the reaction between baking soda and vinegar, where energy is absorbed to break the bonds between the molecules of the reactants.

In summary, endothermic reactions are those that require energy to be absorbed from the surroundings. This results in the products of the reaction having more potential energy than the reactants, which have had their bonds broken and therefore have less potential energy.

To know more about endothermic  refer here

https://brainly.com/question/23184814#

#SPJ11

The new volume of the gas at STP is 16.36 ml, the pressure in the aerosol at the 60 degree temperature  is 9.46 atm and the volume that it will occupy is 557.66 m.

1. We must apply the combined gas law equation to determine the new volume of the gas at STP,

P₁V₁/T₁ = P₂V₂/T₂.

At STP, the pressure is 1 atm and the temperature is 273 K.

Plugging in the values, we get:

6 atm * 10 ml / 100 K = 1 atm * V₂/273 K

V₂ = 16.36 ml (rounded to two decimal places)

2. To find the new pressure of the gas in the aerosol can at a temperature of 60 C, we can use the ideal gas law equation: PV = nRT, where n is the number of moles of gas and R is the gas constant,

P₁/T₁ = P₂/T₂.

Plugging in the values, we get:

8 atm/(45 + 273) K = P₂/(60 + 273) K

P₂ = 9.46 atm (rounded to two decimal places)

3. Using the relation, V₁/T₁ = V₂/T₂. At STP, the temperature is 273 K.

Plugging in the values, we get:

600 ml / (20 + 273) K = V2 / 273 K

V₂ = 557.66 ml (rounded to two decimal places)

To know more about ideal gas equation, visit,

https://brainly.com/question/27870704

#SPJ4

Approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.

To determine the grams of PbCl4 added to 2700 grams of ethanol, causing the boiling point to increase by 6.8 degrees, we will use the molality-based boiling point elevation formula, which is:

ΔTb = Kb * m

Here, ΔTb is the change in boiling point (6.8 degrees), Kb is the molal boiling point elevation constant of ethanol (1.22 °C kg/mol), and m is the molality (moles of solute per kg of solvent).

First, we need to find the molality (m) of the solution:

6.8 = 1.22 * m
m = 6.8 / 1.22 ≈ 5.57 mol/kg

Now, we can calculate the moles of PbCl4 added to the ethanol:

5.57 mol/kg * (2700 g / 1000 g/kg) ≈ 15.03 mol of PbCl4

Next, we need to find the molar mass of PbCl4:

Pb: 207.2 g/mol
Cl: 35.45 g/mol

Molar mass of PbCl4 = 207.2 + (4 * 35.45) ≈ 350.6 g/mol

Finally, we can calculate the grams of PbCl4 added to the ethanol:

15.03 mol * 350.6 g/mol ≈ 5272.2 g

Therefore, approximately 5272.2 grams of PbCl4 were added to 2700 grams of ethanol to increase the boiling point by 6.8 degrees.

To know more about ethanol, visit:

https://brainly.com/question/25002448#

#SPJ11

The size of the Kf indicate regarding the stability of the transition metal complexes is the large values of the Kf indicate that transition metal complexes are often very stable.

The larger the value of the Kf of the complex ion, the more stable will be the transition metal complexes. Due to the how large formation constants are often is not uncommon to listed as the logarithms in the form of the log Kf.

The Kf values that are the very large in the magnitude for the complex ion formation that indicate that the reaction is heavily favors the products. The complex ions that are the poorly formed and this value will be the very small.

To learn more about transition metal here

https://brainly.com/question/30872927

#SPJ4

The resultant pressure after heating the ideal gas to 619 K is approximately 2.17 atm.

To find the resultant pressure of the ideal gas after being heated, we can use the Ideal Gas Law formula, which is:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. Since the volume is constant, we can compare the initial and final states of the gas using the following equation:

P1/T1 = P2/T2

Given the initial conditions: P1 = 0.96 atm, T1 = 273 K, and the final temperature T2 = 619 K. We need to find the final pressure P2.

0.96 atm / 273 K = P2 / 619 K

Now, solve for P2:

P2 = (0.96 atm * 619 K) / 273 K

P2 ≈ 2.17 atm

Therefore, the resultant pressure after heating the ideal gas to 619 K is approximately 2.17 atm.

Know more about Ideal Gas here:

https://brainly.com/question/31463642

#SPJ11

Answer:

3.7996 g

Explanation:

From the number of molecules we can find the number of moles of Fluorine gas (F2) and multiply by Fluorine Gas' molecular weight. Fluorine gas is F2,

F = 18.998g/mol.

F2 (g) = 18.998*2 =37.996g F2(g)/mol

1 mol = 6.02 x 10^23 molecules

[tex]\frac{6.02*10^{22} molecules}{6.02*10^{23}molecules / mole }\\\\ = 0.1 mole[/tex]

0.1 mol x 37.996g F2 (g) / mol

3.7996 g F2

468.5 mL of 10% Na2CO3 solution is required to neutralize 100 mL of HCl solution containing 3.63 g of HCl.

Calculating the amount of HCl in moles is the first step.

mol = 3.63 g / 36.46 g/mol

moles = 0.0995

mol mass HCl = mass HCl / molar mass HCl

The chemical equation for the neutralization of HCl and Na2CO3 is as follows:

2HCl + Na2CO3 → 2NaCl + CO2 + H2O

The equation states that 2 moles of HCl and 1 mole of Na2CO3 react. As a result, the amount of Na2CO3 needed to neutralize the HCl, in moles, is:

moles Na2CO3 = moles HCl / 2

moles Na2CO3 = 0.0995 mol / 2

moles Na2CO3 = 0.0498 mol

The volume of 10% Na2CO3 solution needed to produce 0.0498 mol of Na2CO3 may now be calculated using the definition of molarity:

moles Na2CO3 = (Na2CO3 concentration) x (Na2CO3 volume).

0.1 g/mL x (volume Na2CO3 / 1000 mL) x (105.99 g/mol) = 0.0498 mol

Na2CO3's volume =  (0.0498 mol x 1000 mL) / (0.1 g/mL x 105.99 g/mol).

Na2CO3 = 468.5 mL of volume

Therefore, 468.5 mL of 10% Na2CO3 solution is required to neutralize 100 mL of HCl solution containing 3.63 g of HCl.

Learn more about molarity here : brainly.com/question/14469428

#SPJ1

In any chemical or physical change, energy cannot be created or destroyed, only transformed in form.

option C.

The first law of thermodynamics is known as the law of Conservation of Energy.

This law states that energy can neither be created nor destroyed but can be converted from one form to another.

So the first law of thermodynamics is not known as the "Law of Conservation of Mass", but rather as the "Law of Conservation of Energy".

The statement that best corresponds to the first law of thermodynamics is option C: "In any chemical or physical change, energy cannot be created or destroyed, only transformed in form."

Learn more about first law of thermodynamics here: https://brainly.com/question/26035962

#SPJ1

1.21 grams of hydrogen are required to produce 0.6 moles of methane (CH₄) in the given reaction.

The given reaction is:

C + 2H₂ → CH₄

We can see that 2 moles of hydrogen (H₂) are required to produce 1 mole of methane (CH₄) according to the balanced chemical equation. Therefore, to produce 0.6 moles of methane, we will need 2 times as many moles of hydrogen, which is:

number of moles of hydrogen = 2 × number of moles of methane

number of moles of hydrogen = 2 × 0.6 moles

number of moles of hydrogen = 1.2 moles

To convert the number of moles of hydrogen to grams, we need to use the molar mass of hydrogen, which is approximately 1.008 g/mol. Thus, the mass of hydrogen required can be calculated as:

mass of hydrogen = number of moles of hydrogen × molar mass of hydrogen

mass of hydrogen = 1.2 moles × 1.008 g/mol

mass of hydrogen = 1.21 g

To learn more about hydrogen follow the link:

https://brainly.com/question/31018544

#SPJ4

The complete question is:

For the reaction C+2H₂ → CH₄, how many grams of hydrogen are required to produce 0.6 moles of methane, CH₄?

Answer:

  3 L

Explanation:

You want to know the volume of water vapor produced at STP when 1 L of C₆H₆ reacts with oxygen.

The given balanced reaction equation tells us that 6 moles of water vapor are produced from each 2 moles of C₆H₆. At STP, the volume of water vapor will be 3 times the volume of C₆H₆.

3 liters of water vapor are produced by reacting 1 liter of C₆H₆ with oxygen.

An aircraft flying from a region of higher air pressure towards a region of lower air pressure will experience a change in altitude, and the aircraft's pressure altimeter will read an altitude different than the plane's true elevation, unless corrections are made to the altimeter.

When an aircraft moves from an area of higher air pressure to an area of lower air pressure, the aircraft will generally gain altitude. This occurs because the pressure difference causes the air to become less dense, allowing the aircraft to rise more easily. As a result, the aircraft's wings will generate more lift, enabling it to climb higher.

However, the pressure altimeter, which measures an aircraft's altitude based on the surrounding air pressure, will not accurately reflect the plane's true elevation in this situation. The altimeter will typically read an altitude lower than the actual elevation of the aircraft.

This discrepancy occurs because the altimeter is calibrated for a standard pressure setting and will not account for variations in air pressure without adjustments.

To ensure accurate altitude readings, pilots must make corrections to the altimeter by setting the appropriate pressure setting for the area they are flying in, known as the "altimeter setting." This setting can be obtained from air traffic control or other aviation weather sources.

By inputting the correct altimeter setting, the pressure altimeter will provide a more accurate altitude reading, reflecting the plane's true elevation.

In summary, an aircraft flying from a region of higher air pressure towards a region of lower air pressure will gain altitude, and the aircraft's pressure altimeter will read an altitude lower than the plane's true elevation unless corrections are made to the altimeter.

To know more about altimeter, visit:

https://brainly.com/question/13181528#

#SPJ11

To calculate the pressure of methane gas at 60 degrees Celsius, we can use the ideal gas law equation:

P1/T1 = P2/T2

Where P1 denotes the starting pressure, T1 the starting temperature, P2 the desired final pressure, and T2 the desired final temperature.

We'll need to convert the temperatures to Kelvin, as the ideal gas law equation requires temperature in Kelvin.

Initial temperature (T1) = 76 + 273.15 = 349.15 K
Final temperature (T2) = 60 + 273.15 = 333.15 K

We can now enter the values we have:

102650/349.15 = P2/333.15

Solving for P2:

P2 = (102650 * 333.15)/349.15

P2 = 98,066.86 Pascal's

Therefore, the pressure of methane gas at 60 degrees Celsius when the initial pressure was 102650 Pascal's at 76 degrees Celsius, with constant volume and fixed amount of gas, is 98,066.86 Pascal's.

What do you mean by Ideal gas law?

The behaviour of an Ideal gas is described by the Ideal gas law, a key equation in thermodynamics. PV = nRT is the formula for this equation, where P is the gas's pressure, V is its volume, n is the number of moles, R is the global gas constant, and T is the gas's absolute temperature.

The Ideal gas law assumes that the gas is composed of a large number of small particles that are in constant random motion and that there are no intermolecular forces between the particles. It also assumes that the volume of the gas molecules is negligible compared to the volume of the container in which the gas is held.

The Ideal gas law can be used to determine the pressure, volume, temperature, or number of moles of an ideal gas, given the values of the other variables. It is particularly useful in applications such as thermodynamics, chemistry, and engineering, where it can be used to analyze and design gas-powered systems and processes.

To know more about Ideal gas law:

https://brainly.com/question/28257995

#SPJ11

Isopropyl alcohol (IPA) is an effective disinfectant when used in the appropriate concentration.

The Centers for Disease Control and Prevention (CDC) recommends using solutions with at least 70% IPA for disinfecting surfaces against COVID-19.

Higher concentrations (e.g., 90-99%) of isopropyl alcohol may evaporate too quickly to be effective, while lower concentrations (e.g., 50%) may not be strong enough to kill certain types of germs.

It is also important to follow proper application procedures and allow sufficient contact time for the disinfectant to work effectively.

To know more about Isopropyl alcohol refer to-

https://brainly.com/question/14896958

#SPJ11

The current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.

The amount of tin plated out can be calculated using Faraday's law of electrolysis, which states:

Mass of substance plated = (Current x Time x Atomic weight) / (Valency x Faraday's constant)

The atomic weight of tin is 118.71 g/mol, and its valency is 2 (since it forms Sn2+ ions in the solution). The Faraday's constant is 96,485 C/mol.

Plugging in the given values, we get:

6.70 g = (4.82 A x t x 118.71 g/mol) / (2 x 96485 C/mol)

Solving for t, we get:

t = (6.70 g x 2 x 96485 C/mol) / (4.82 A x 118.71 g/mol)

t = 10.33 hours

Therefore, the current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.

To know more about Faraday's law  refer to-

https://brainly.com/question/1640558

#SPJ11

I. Q = mct; c is the specific heat capacity, II. Q = ml vapor; l vapor is the latent heat of vaporization,III. Q = ml fusion; l fusion is the latent heat of fusion.

Vaporization is the process of a substance changing from its liquid form to its gaseous form. It occurs when the substance absorbs heat, causing its molecules to move faster and further apart, converting it from a liquid to a gas. Vaporization is a process that occurs when a liquid is heated to its boiling point and then cooled, causing the molecules to break apart and form a vapor. Vaporization can also occur when a solid is heated until it sublimates, or when the molecules of the solid are broken down into a gas. Vaporization is an important part of the water cycle, and it is also used in many industries, such as chemical production, pharmaceutical manufacturing, and food processing.

To learn more about vaporization

https://brainly.com/question/26306578

#SPJ4

Heat equations are mathematical equations that are used to calculate the amount of heat energy transferred between two objects. The first heat equation, q = mcꕔt, relates the amount of heat transferred (q) to the mass of the object (m), the specific heat capacity (c), and the temperature change (ꕔt).

The specific heat capacity is the amount of heat energy required to raise the temperature of one gram of a substance by one degree Celsius. The second heat equation, q = mlvapor, relates the amount of heat required to vaporize a substance (q) to the mass of the substance (m) and the latent heat of vaporization (lvapor).

The latent heat of vaporization is the amount of heat required to transform a unit mass of a substance from a liquid phase to a gaseous phase. Finally, the third heat equation, q = mlfusion, relates the amount of heat required to melt a substance (q) to the mass of the substance (m) and the latent heat of fusion (lfusion).

The latent heat of fusion is the amount of heat required to transform a unit mass of a substance from a solid phase to a liquid phase.

to know more about Heat equations refer here

https://brainly.com/question/28205183#

#SPJ11

The % mass of C6H12O6 in the new solution is approximately 67.2%.

We can calculate the mass percentage of C6H12O6 in the new solution using the following formula:

% mass = (mass of C6H12O6 / total mass of solution) x 100%

First, we need to calculate the total mass of the solution by adding the mass of C6H12O6 and the mass of cyclohexane:

total mass of solution = 8.50 g + 4.15 g = 12.65 g

Next, we can calculate the mass percentage of C6H12O6 in the solution:

% mass = (8.50 g / 12.65 g) x 100% ≈ 67.2%

Therefore, the % mass of C6H12O6 in the new solution is approximately 67.2%.

To know more about mass percentage refer here:

https://brainly.com/question/19694949

#SPJ11

The  statements correctly describe protecting groups are :

"A reactive functional group converted to another functional group and it will not interfere desired reaction."

"The Protecting group easily removed (deprotection) to the regenerate original functional group."

The protecting group are the molecular formula that will be introduced  the specific functional group and which is present in the poly-functional molecule and the protecting group block the reactivity under the some reaction conditions and which is needed to make the modifications in molecule.

The protecting group readily and the protecting group is selectively introduced to functional group in poly-functional molecule. Protecting group is capable of the selectively removed in under some of the mild conditions when protection is no more longer required.

To learn more about functional group here

https://brainly.com/question/14618322

#SPJ4

An enol intermediate and a chloroalkoxide are byproducts of reaction between Starting Material 1, which is carbonyl bonded to a chloride and an ethyl group, and Starting Material 2, which is carbonyl bonded to a methyl group and O minus with three lone pairs.

This reaction takes place in the presence of a Lewis acid catalyst. Starting Material 1's carbonyl carbon is attacked by the methyl group, which is followed by a proton transfer and tautomerization to produce the enol intermediate. Following the enol's attack on the carbonyl carbon in Starting Material 2, chloroalkoxide product is created. Curved arrows depicting movements of electrons in reactants and intermediate products can be used to complete the mechanism of the forward reaction.

To know more about Lewis acid catalyst, here

brainly.com/question/31485158

#SPJ4

--The complete Question is, What product is formed when Starting Material 1 reacts with Starting Material 2 in the presence of a Lewis acid catalyst, and complete the mechanism of the forward reaction by placing curved arrows to show the electron movements in the reactants and intermediate product? --

Solubility is the ability of a substance to dissolve in a liquid to form a solution. It is an important physical property of substances that must be taken into account.

Substance is a term used to refer to a material that has mass and occupies space. It is something that has physical properties that can be identified and measured. Substance can be either a solid, liquid, gas, or plasma. Examples of substances include solids such as iron, liquids like water, gases like oxygen, and plasma like fire.

Solubility is the ability of a substance to dissolve in a liquid to form a solution. It is an important physical property of substances that must be taken into account when studying topics such as solute-solvent interactions, chemical reactions, and phase changes. In this lab, we will be exploring the solubility of various substances, including sugar, salt, and baking soda, to determine how their solubility is affected by changes in temperature. To begin, we will measure out one gram of each substance into separate test tubes and dissolve them in 10mL of water. We will then place each test tube into a beaker of hot (90°C) and cold (0°C) water and observe the differences in solubility. We will use a thermometer to measure the temperatures of each beaker and record the results. Next, we will measure out two grams of each substance and repeat the same procedure as before. We will then measure out five grams of each substance and repeat the experiments. We will record our observations and results for each experiment.

To learn more about substance

https://brainly.com/question/29108029

#SPJ4

The temperature of the helium sample changed by approximately 0.0314 degrees Celsius.

To calculate the temperature change of the helium sample, we can use the formula:

q = mcΔT

where q is the heat absorbed (125.7 calories), m is the mass of the sample (634.5 g), c is the specific heat capacity of helium (1.241 cal/(g·°C)), and ΔT is the temperature change in degrees Celsius. We need to find ΔT.

Rearranging the formula to solve for ΔT, we get:

ΔT = q / (mc)

Now, plug in the given values:

ΔT = 125.7 cal / (634.5 g × 1.241 cal/(g·°C))

ΔT ≈ 0.0314 °C

Therefore, the temperature of the helium sample changed by approximately 0.0314 degrees Celsius.

Know more about Helium Sample here:

https://brainly.com/question/11959989

#SPJ11

The Ksp of a substance is the equilibrium constant for the reaction between the dissolved ions and the undissolved solid. In this case, the equation is M₂+(aq) + 2OH-(aq) ↔ M(OH)₂(s).

Knowing the volume of HCl required for the titration (25.10 mL) and the molarity of the HCl (0.173 M), the concentration of M₂+ and OH- ions in the saturated solution can be calculated. The Ksp can then be calculated using the concentration of M₂+ and OH- ions in the solution.

The Ksp can be expressed as Ksp = [M₂+][OH]⁻². To calculate the Ksp, the molarity of the HCl solution is multiplied by the volume used in the titration (25.10 mL) to get the moles of HCl used (4.35 x 10⁻³mol). This number is then divided by the volume of the saturated solution (28.5 mL) to get the concentration of M₂+ (1.53 x 10-2 M) and OH- (3.06 x 10⁻² M).

Finally, the Ksp can be calculated using the concentrations of M₂+ and OH- ions: Ksp = [1.53 x 10⁻²][3.06 x 10⁻²]2 = 4.94 x 10⁻⁵. Thus, the Ksp for this alkaline earth hydroxide is 4.94 x 10-5.

Know more about Equilibrium constant  here

https://brainly.com/question/10038290#

#SPJ11

The nuclide produced when boron-10 is bombarded with a neutron is lithium-7 besides a hydrogen-1 atom.

When boron-10 is bombarded with a neutron, it undergoes a nuclear reaction called neutron capture, which produces lithium-7 and a highly excited compound nucleus.

The compound nucleus then emits an alpha particle and a gamma ray to reach a stable state. This reaction is commonly used in nuclear reactors to produce tritium, which is a fuel for fusion reactions.

Lithium-7 is a stable isotope of lithium and is commonly used in nuclear reactions as a neutron detector.

To know more about nuclear reaction, refer here:

https://brainly.com/question/14648387#

#SPJ11

The volume of the gas in the truck tire is approximately 44.2 L.

The ideal gas law equation can be used to solve for the volume of the gas in the tire:

PV = nRT

where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature of the gas.

Substituting the given values into the equation, we get:

(2.1 atm)(V) = (1.85 mol)(0.08206 L atm/mol K)(300 K)

Solving for V, we get:

V = (1.85 mol)(0.08206 L atm/mol K)(300 K)/(2.1 atm) ≈ 44.2 L

To know more about ideal gas law, refer here:

https://brainly.com/question/30458409#

#SPJ11

Total, 1.77 g of silver sulfide are formed, when 1. 90 g of silver reacts with 0.

Balanced chemical equation for the reaction is;

4Ag(s) + 2H₂S(g) + O₂(g) → 2Ag₂S(s) + 2H₂O(g)

To determine the limiting reactant, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation.

First, we need to convert the given masses of silver, hydrogen sulfide, and oxygen to moles;

molar mass of Ag = 107.87 g/mol

moles of Ag = 1.90 g / 107.87 g/mol

= 0.0176 mol

molar mass of H₂S = 2(1.01 g/mol) + 32.06 g/mol = 34.08 g/mol

moles of H₂S = 0.280 g / 34.08 g/mol = 0.00821 mol

molar mass of O₂ = 2(16.00 g/mol) = 32.00 g/mol

moles of O₂ = 0.160 g / 32.00 g/mol = 0.00500 mol

Next, we need to compare the number of moles of each reactant to their stoichiometric ratio in the balanced equation;

Ag ; H₂S ; O₂ = 4 : 2 : 1

The stoichiometric ratio tells us that we need 2 moles of H2S and 0.5 moles of O₂ for every 4 moles of Ag.

Let's calculate the number of moles of each reactant we actually have, starting with H₂S;

H₂S is the limiting reactant if it produces fewer moles of Ag₂S than either of the other reactants. We can calculate the number of moles of Ag₂S that each reactant would produce, assuming that it is the limiting reactant;

If H₂S is the limiting reactant;

moles of Ag₂S = (0.00821 mol H₂S) x (2 mol Ag₂S / 2 mol H₂S)

= 0.00821 mol

If O₂ is the limiting reactant;

moles of Ag₂S = (0.00500 mol O₂) x (2 mol Ag2S / 1 mol O₂)

= 0.0100 mol

If Ag is the limiting reactant;

moles of Ag₂S = (0.0176 mol Ag) x (0.5 mol Ag₂S / 4 mol Ag)

= 0.00220 mol

Since H₂S produces the fewest moles of Ag₂S, it is the limiting reactant.

To calculate the mass of Ag₂S produced, we can use the number of moles of Ag₂S produced by the limiting reactant:

mass of Ag₂S = (0.00821 mol Ag₂S) x (2 x 107.87 g/mol)

= 1.77 g

Therefore, 1.77 g of silver sulfide are formed.

To know more about silver sulfide here

https://brainly.com/question/31158390

#SPJ4

Part a: The arrows in the food web represent the flow of energy and nutrients.

Part b: Ecosystem supports fewer wolves than deer because wolves are at a higher trophic level in food chain.

Part a: The movement of nutrients and energy from one organism to another is depicted by arrows in food chain. They specifically point to the direction of matter and energy transfer when one organism feeds another.

Part b: Due to wolves' higher trophic level in food chain, the ecology can only support a smaller population of them than deer. Due to energy loss from heat and metabolism, the amount of energy available at each level of the food chain diminishes as it progresses up the chain.

To know more about trophic level, here

brainly.com/question/13267084

#SPJ4