Step 5: Measure the Mass of the Water (Iron)
Tare the balance. Put calorimeter (no lid) on the balance.
Measure the mass to the nearest 0.01 g.
g
DONE✔
ZERO

HAZMAT Class 6 Toxic and infectious substances.

Answer:

CLASS 2 Gases

Explanation:

Hope this helps

Cr₂O₃ ( s ) + 3H₂S ( g ) → Cr₂S₃ ( s ) + 3H₂O ( l )

mol  Cr₂S₃ = 421 : 200.19 g/mol = 2.103

mol Cr₂O₃ ≈ mol Cr₂S₃ = 2.103 ( equivalent coefficient)

mass Cr₂O₃ = 2.103 x 151.99 g/mol = 319.63 gr

Answer:

For pH= 4.00 :

Add 0.1 ml of 0.1 molar NaOH to 50 ml of 0.1 molar potassium hydrogen phthalate .

Question 1

[tex]\text{pH}=-\log(\text{H}^{+})\\\\13=-\log(\text{H}^{+})\\ \\ \text{[H}^{+}]}=1 \times \boxed{10^{-13} \text{ moles per liter}} \\ \\ \text{[H}^{+}] \times \text{[OH}^{-}] =1 \times 10^{-14} \text{ M}\\\\\text{[OH}^{-}]=\boxed{1 \times 10^{-1} \text{ moles per liter}}[/tex]

Question 2

[tex]\text{pH}=-\log(\text{H}^{+})\\\\\text{pH}=-\log(1.0 \times 10^{-4})=\boxed{4}[/tex]

Answer:

Ba(OH)2(aq) + H2SO4(aq) ----> BaSO4(s) + 2H2O(l)

Question 1

1) The formula of iron(II) iodide is [tex]\text{FeI}_{2}[/tex] and has a formula mass of 309.654 g/mol. This means that in 12.2 grams, there are

So, the molarity is (0.039398812868557)/(0.5) = 0.0788 M (to 3 sf)

2) In 0.039398812868557 mol of iron(II) iodide, there are 0.039398812868557 moles of iron(II) iodide cations, and thus the molarity is still 0.0788 M (to 3 sf)

3) In 0.039398812868557 mol of iron(II) iodide, there are

Thus, the molarity is (0.078797625737114)/(0.5) = 0.158 M (to 3 sf)

Question 2

1) The formula of iron(III) sulfate is [tex]\text{Fe}_{2}\text{(SO}_{4})_{3}[/tex] and has a formula mass of 399.9 g/mol. This means that in 16.8 grams, there are

So, the molarity is (0.042010502625656)/(0.25) = 0.168 M (to 3 sf)

2) In 0.042010502625656 moles of iron(III) sulfate, there are 2(0.042010502625656)=0.084021005251312 moles of iron(III) cations, so the molarity is:

3) In 0.042010502625656 moles of iron(III) sulfate, there are 3(0.042010502625656)=0.12603150787697 moles of sulfate anions, so the molarity is:

Question 3

Since we need 50.0 mL of solution at 0.271 M,

So, we need this from 12.0 M HBr so, meaning that:

Answer:

A

Explanation:

I'm right I took the test

Iron has an atomic mass of 55.845 g/mol, so the amount of iron in 65.0 g is 65.0/55.845 = mol.

Avogadro's law states that in every mole of a substance, there are [tex]6.022 \times 10^{23}[/tex] particles per mole, so in this case, that means there are [tex](1.16393589)(6.022 \times 10^{23})=\boxed{7.01 \times 10^{23}} \text{ atoms (to 3 sf)}}[/tex]

Answer: c) [tex]2\text{Na}_{3}\text{PO}_{4}+3\text{CaCl}_{2} \longrightarrow 6\text{NaCl}+\text{Ca}_{3}\text{(PO}_{4})_{2}[/tex]

Answer:

A magic number is a number of nucleons (either protons or neutrons, individually) that form complete bands within the atomic nucleus. As a result, atomic nuclei with a magic number of protons or neutrons are significantly more persistent than other nuclei.

Answer:

The fifth answer choice (NH3 + H2O = NH4+ + OH-)

Explanation:

An acid-base reaction occurs when an acid and base combine, and the acid, (which is H2O in this case) "donates" a proton, or an H+ to the base. In this reaction, H2O gave one of its H+ to NH3, to make NH4+ and OH-. NH4+ now has a positive charge because it gained a positive ion, while OH- now has a negative charge because it gained a negative ion.

The trend for the radii is Mg²⁺ < Na+ < Ne <F⁻

With the increase in number of protons in the nucleus the electrons are more attracted towards nucleus and so the ionic radius decreases.

Ionic size increases with the addition of electrons and ionic size decreases with the loss of electrons.

Higher is the atomic number, higher will be the effective nuclear charge, lower will be the size.

F⁻

no. of proton=9

no of electron = 10

Na+

no. of proton=11

no of electron=10

Mg²⁺

no. of proton=12

no of electron=10

Ne

no. of proton=10

no of electron=10

Mg²⁺ < Na+ < Ne <F⁻

Therefore the trend for the radii is Mg²⁺ < Na+ < Ne <F⁻

To know more about effect of protons on Ionic Radius

https://brainly.com/question/9444116

#SPJ1

The volume of the balloon when the mass of oxygen gas is decreased to 50g is 50L.

We will use the ideal gas equation-

PV=nRT

P=Pressure

V=volume

n=no. of moles

T=temperature

In this question temperature and pressure will remains constant then the above equation can be rewritten as-

[tex]V_{1} /n_{1} =V_{2} /n2[/tex]

where V1= initial volume of the balloon

            V2=  volume of the balloon when the mass of oxygen gas is decreased to 50g

now, substitute the values in the above equation-

       100/3.12=V2/1.56

hence, the volume of the balloon when the mass of oxygen gas is decreased to 50g is 50L.

learn more about the ideal gas equation here:

https://brainly.com/question/1056445

#SPJ10

Answer:exothermice

Explanation: it is relaeing heat not keeping  it in

Answer:

Topographic maps generally shows Natural features such as Rivers and Lakes.

sometimes they also show some features made by humans like brodges, elevations etc.

Answer:

Topographic maps show contours, elevation, forest cover, marsh, pipelines, power transmission lines, buildings, and various types of boundary lines such as international, provincial, and administrative, and many others.

please give me brainliest

there are five Taste bud present tongue they are -

out of the four type of papillie present on tongue the fungiform circumvallate and folite papillie contain numerous small taste but few such type of Taste but also occur in the mucous membranes of soft palate tonsils and epiglottis all of these days but received taste is normally

each Taste bud is an oval structures formed due to modification of epithelial cells which are situated erect and vertically on the surface long sensory cells and supporting cells are found in this bird is sensory cell is spindle shaped in which a sensory here is found at its free in the century fibre of the facial and vagus cranial nerves are wrapped around the basal and of the gustatory cells each test but open on the epithelial surface through minute taste pore

Answer:

The oxygen atom in water has a negative charge.

Polar molecule: A molecule in which the centroid of the positive charges is different from the centroid of the negative charges.

Oxygen: A colorless, odorless, gaseous element constituting about one-fifth of the volume of the atmosphere and present in a combined state in nature. It is the supporter of combustion in air and was the standard of atomic, combining, and molecular weights until 1961, when carbon 12 became the new standard. Symbol: O; atomic weight: 15.9994; atomic number: 8; density: 1.4290 g/l at 0°C and 760mm pressure.

Water: A transparent, odorless, tasteless liquid, a compound of hydrogen and oxygen, H2O, freezing at 32°F or 0°C and boiling at 212°F or 100°C. that in more or less impure state constitutes rain, oceans, lakes, rivers, etc.: it contains 11.188 percent hydrogen and 88.812 percent oxygen, by weight.

Hydrogen: A colorless, odorless, flammable gas that combines chemically with oxygen to form water: the lightest of the known element. Symbol: H; atomic weight: 1.00797; atomic number: 1; density: 0.0899 g/l at 0°C and 760 mm pressure.

Atom: Am atom is the smallest constituent particle of a chemical element which has the properties of that element. They re comprised of at least an electron and a portion, as is the case for Hydrogen. Atoms of all other elements however, contain at least one neutron.

Proton: A positively charged elementary particle that is a fundamental constituent of all atomic nuclei. It is the lightest and most stable baryon, having a charge equal in magnitude to that of the electron, a spin of 1/2, and a mass of 1.673 × 10-27kg. Symbol: P.

Electron: An elementary particle that is a fundamental constituent of matter, having a negative charge of 1.602 × 10-19 coulombs, ha mass of 9.108 × 10-31 kilograms, and spin of 1/23, and existing independently or as the component outside the nucleus of an atom.

Neutron: An elementary particle having no charge, mass slightly greater than that of a proton, and spin of 1/2: a constituent of the nuclei of all atoms except those of hydrogen. Symbol: n.

A object has a negative charge when it consists of more electrons than protons.

With a partial positive charge on 2 Hs and a partial negative charge on oxygen, water molecules are polar molecules.

Actually, two hydrogen atoms and the core oxygen atom of water are covalently connected. Due to its greater electronegative nature than hydrogen, oxygen pulls the bound electron pair in the middle of the atom toward it.

When illustrating higher electron densities over oxygen, partial negative charge is used, whereas partial positive charge is used to illustrate lower densities over hydrogen atoms.

#SPJ2

Answer:245.088

Explanation: you subtract final temperature with initial temperature = 46 then multiply by grams = 552 then multiplied by J = 245.088

The percent yield for the chemical  reaction producing sulfur trioxide is 66.51%.

Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.

In cases where percent yield is over 100% it indicates that more sample is recovered than the predicted amount.

For the given reaction, theoretical yield is calculated as,

128.132 g of sulfur dioxide gives 160.12 g of sulfur trioxide

∴705 g of sulfur dioxide gives 705×160.12/128.132= 881 g

Percent yield is, 586/881×100=66.51%

Therefore, the percent yield for the chemical  reaction is 66.51%.

Learn more about percent yield,here:

https://brainly.com/question/12704041

#SPJ1

Answer:

[Na]^+ [Cl]^-

Explanation:

Lets say its sodium, its number of electrons is 11, but when its stable (an ion), it is 10. and chloride, number of electrons is 17, but when its stable (an ion) it is 18. So the lewis structure for that is, remember with the straight brackets (not sure what it's called, but you know what I mean I guess) its this one: [ ]

Sodium will be + because it has more protons (11-10 = +1), and chloride will be - because it gained an electron, so has more electrons than protons (17-18 = -1)

So the lewis structure would be:

[Na]^+  for sodium

and

[Cl]^- for chlorine

Sodium chloride:

[Na]^+ [Cl]^-

Also just to add, only 1 of each atom (Na and Cl) was needed for the bonding, but if let's say example; 2 Cl was needed to bond with sodium, there would be 2 Cl (same) and 1 Na.

Answer:

I am a small palm-sized pointing device

NO is the limiting reagent and 4.34 g is the amount of the excess reagent that remains after the reaction is complete

The reactant that is entirely used up in a reaction is called as limiting reagent.

The reaction:

[tex]2NO(g) +2H_2(g)[/tex] → [tex]N_2 +2H_2O[/tex]

Moles of nitrogen monoxide

Molecular weight: [tex]M_(_N_O_)[/tex]=30g/mol

[tex]n_(_N_O_) =\frac{mass}{molar \;mass}[/tex]

[tex]n_(_N_O_) =\frac{22.0}{30g/mol}[/tex]

[tex]n_(_N_O_) = 0.73 mol[/tex]

Moles of hydrogen

Molecular weight: [tex]M_(_H_2_)[/tex]=30g/mol

[tex]n_(_H_2_) =\frac{mass}{molar \;mass}[/tex]

[tex]n_(_H_2_) =\frac{5.80g}{2g/mol}[/tex]

[tex]n_(_H_2_) = 2.9 mol[/tex]

Hydrogen gas is in excess.

NO is the limiting reagent.

The amount of the excess reagent remains after the reaction is complete.

[tex]n_(_N_2_) =[/tex] (2.9 mol- 0.73 mol NO x [tex]\frac{1 \;mol \;of \;H_2}{2 \;mole \;of \;NO}[/tex]) x [tex]\frac{2g \;of \;H_2}{mole \;of \;H_2}[/tex]

[tex]n_(_N_2_) =[/tex]4.34 g

Learn more about limiting reagents here:

https://brainly.com/question/26905271

#SPJ1

Considering the reaction's stoichiometry and the notion of molarity, 1.167 grams of solid barium sulfate form when 32.0 mL of 0.160 M barium chloride reacts with 70.0 mL of 0.065 M sodium sulfate.

The balanced reaction is:

BaCl₂(aq) + Na₂SO₄(aq) → BaSO₄(s) + 2 NaCl(aq)

The reactant that is consumed first in a chemical reaction is the limiting reagent because it stops any more reactions from taking place. The limiting reagent controls how much product is produced during the reaction.

Utilizing the reaction stoichiometry and the estimated number of moles, it is possible to identify the limiting reagent.

According to reaction stoichiometry, which describes the proportions of reagents and products in a chemical reaction, the following numbers of moles of each component are involved in the reaction:

Molarity, on the other hand, refers to how many moles of solute are dissolved in a certain volume.

Molarity is determined by the expression:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units[tex]\frac{moles}{L}[/tex].

In this case, 32.0 mL= 0.032L (being 1000 mL= 1 L) of barium chloride reacts. So, by definition of molarity, the number of moles that participate in the reaction is calculated as:

[tex]0.160 M=\frac{No. of moles of solute}{0.032L}[/tex]

No of moles of barium chloride(solute) = 0.160M × 0.032L

No of moles of barium chloride(solute) = 0.00512moles

On the other side,70.0mL= 0.070 L of 0.065 M sodium sulfate reacts. So, by definition of molarity, the number of moles that participate in the reaction is calculated as:

[tex]0.065 M =\frac{No of moles of solute}{0.070L}[/tex]

No of moles of Sodium sulfate= 0.065M × 0.070L

No of moles of Sodium sulfate = 0.0045moles

if by stoichiometry 1 mole of barium chloride reacts with 1 mole of sodium sulfate, 0.00512moles of barium sulfate reacts with how many moles of sodium sulfate?

No. of moles of sodium sulfate=

[tex]\frac{ 0.00512moles of barium sulfate * 1 mole of sodium sulfate}{1 mole of barium chloride}[/tex]

amount of moles of sodium sulfate= 0.00512 moles

But 0.00512moles of sodium sulfate are not available, 0.0045moles  moles are available. Since you have fewer moles than you need to react with  0.00512moles of barium chloride, sodium sulfate will be the limiting reagent.

Then, it is possible to determine the number of moles of barium sulfate produced by another rule of three: if by stoichiometry 1 mole of sodium sulfate produces 1 mole of barium sulfate, 0.00512 moles of sodium sulfate produces how many moles of barium sulfate?

[tex]Amt of mole of barium sulfate=\frac{0.00512 moles of sodium sulfate* 1mole of barium sulfate}{1 mole of sodium sulfate}[/tex]

amount of moles of barium sulfate=  0

Being the mass molar of barium sulfate is 233.34 g/mole, the mass-produced of the compound is calculated as:

                              = [tex]\frac{0.00512 moles * 233.34 gm}{1 mole}[/tex]

                              =1.167 gm

Hence, 1.167 gm of solid barium sulfate is formed.

To know more about stoichiometry refer to:-https://brainly.com/question/14935523

#SPJ10

Answer: There is a very large percentage of C-12.

Explanation:

The atomic mass is must closer to that of C-12 than of C-13, meaning that there is a much larger percentage of C-12.

Answer:

HCO3- + BrO- → HBrO + CO32-

Explanation:

I think this is the answer hope it helps

Answer: B

Explanation:

Answer:

0.8797 J/g oC

Explanation:

use mcAT=mcaT

So mass of sulphur

[tex]\\ \rm\Rrightarrow 0.02\times 757\times 10^{6}[/tex]

[tex]\\ \rm\Rrightarrow 1514\times 10^4[/tex]

Moles =64/32=2

So

So tons of sulphur dioxide

[tex]\\ \rm\Rrightarrow 2(1516)10^4[/tex]

[tex]\\ \rm\Rrightarrow 3032\times 10^4ton[/tex]

Explanation:

2% of 2million tons of sulphur=

2÷100×7.57E9

That is;

[tex] \frac{2}{100} \times 7.57 \times 10 {}^{6} = 0.02 \times 7.57 \times 10 {}^{6} \\ = 2 \times 10 {}^{ - 2} \times7.57 \times 10 {}^{6} = 2 \times 7.57(10 {}^{ - 2 + 6}) \\ = 15.14 \times 10 {}^{4} (for \: sulphur) \\ for \: sulphur \: dioxide = so2 \\ the \: molar \: mass \: of \: so2 = 64g.mol {}^{ -1} \\ if \: 32grams \: of \: sulphur \: weighs \: 15.14 \times 10 {}^{4} tones \\ 64grams \: will \: weigh \: \frac{64}{32} \times 15.14 \times 10 {}^{4} \\ = 2 \times 15.14 \times 10 {}^{4} \\ = 30.28 \times 10 {}^{4} \\ or = 3.028 \times 10 {}^{5} tones[/tex]

Answer:

Tablets are made from salts of iron hence it does not look like iron.

Explanation: