simple interest earned for principal of $2000 at and 8% rate for 5 years

Hence, 7 + 24 = 25 is a valid equation, and C is the correct response as the right triangle with sides of 7 inches, 25 inches, and 24 inches.

A right quadrilateral relationship between its sides is described by the Pythagorean Theorem, a fundamental theorem of geometry. According to this rule, the hypotenuse's square value, which is the side that forms the right angle, is the same as the total of the squared that compose the other two sides. In other words, the following is how the theorem can be expressed for a quadrilateral with leg of length a, b, and c and a hypotenuse of length c: [tex]a^2 + b^2 = c^2[/tex] . Although it's believed that the Greeks and romans and Indians knew about this theorem before the ancient Greek philosopher Plato, who is recognized with discovering it, gave it its name.

given

The Pythagorean Theorem's equation setup for a right triangle is as follows: [tex]a^2 + b^2 = c^2[/tex]

where c is the length of the hypotenuse and a, b, and c are the lengths of the right triangle's legs.

Right triangle with sides of 7 inches, 25 inches, and 24 inches is shown. Its legs are 7 inches and 24 inches, and its hypotenuse is 25 inches. Hence, we may construct the equation as follows:

[tex]7^2 + 24^2 = 25^2[/tex]

When we simplify this equation, we obtain:

49 + 576 = 625

625 = 625

Hence, 7 + 24 = 25 is a valid equation, and C is the correct response as the right triangle with sides of 7 inches, 25 inches, and 24 inches.

To know more about Pythagorean theorem visit:

https://brainly.com/question/14930619

#SPJ1

The greatest common what is the greatest common factor of 6a2b2 and 15a4b37 is option d.

To find the greatest common factor (GCF) of 6a^2b^2, 15a^4b^3, 7a^3b, and 3a^2b^2, follow these steps:

Step 1: Find the GCF of the numerical coefficients: The GCF of 6, 15, 7, and 3 is 1.

Step 2: Find the GCF of the 'a' terms: The lowest power of 'a' is a^2, so the GCF is a^2.

Step 3: Find the GCF of the 'b' terms: The lowest power of 'b' is b, so the GCF is b.

Combine the results from steps 1, 2, and 3: The GCF of 6a^2b^2, 15a^4b^3, 7a^3b, and 3a^2b^2 is 1a^2b.

Therefore, the GCF of 6a^2b^2 and 15a^4b^3 is 3a^2b^2, which is option (d).

To know more about greatest common factor (GCF) refer here:

https://brainly.com/question/31047765?#

#SPJ11

Answer:

I attached a graph to the problem, so you can better understand why there is no solution to the system of equations:

The graph of the two lines shows that the two lines are parallel lines and never intersect.  We know (even without writing the second equation in slope-intercept form) that parallel lines have the same slope and will never intersect, so the two lines have the same slope.  Graphically, a system of equations can only have a solution, when the two lines intersect at one point or intersect at infinitely many points.  Had the two lines had the same y-intercept, they would no longer be parallel lines, as they would overlap and thus would have infinitely many solutions.  Because this is not the case, there are no solutions to the system of equations.

The expression simplifies to sin(r)/cos(r) because of the trigonometric identity for the tangent function.

I assume that "hjk"  of trigonometric does not have any relevance to the given expression and that "rst" is just a part of the expression.

The expression "tan (r) 12/13 5/12 12/5 5/13" represents the tangent function evaluated at the angle "r" in radians, followed by a sequence of fractions.

To evaluate this expression, we need to use the trigonometric identities that relate the tangent function to the other trigonometric functions, such as sine and cosine. Specifically, we can use the following identity:

tan(r) = sin(r) / cos(r)

We can use this identity to write the expression as:

sin(r) / cos(r) * 12/13 * 5/12 * 12/5 * 5/13

Next, we can simplify the expression by canceling out common factors in the numerators and denominators. For example, we can simplify 12/13 * 13/12 to 1 and 5/13 * 13/5 to 1. After simplification, the expression becomes:

sin(r) / cos(r) * 1 * 1 * 1 * 1

Simplifying further, we get:

sin(r) / cos(r)

Therefore, the expression "tan (r) 12/13 5/12 12/5 5/13" simplifies to "sin(r) / cos(r)".

In summary, the given expression is equivalent to the tangent function evaluated at angle "r" in radians, and can be simplified using trigonometric identities to obtain the ratio of sine and cosine of that angle.

Learn more about  trigonometric

brainly.com/question/29156330

#SPJ11

Answer:

point form - (2,2)

x=2 y=2

The conclusion is YEN ≈ 63.43°.and  YN = 4√5 cm.

We can begin by drawing a diagram of the triangle LNM with the given measurements:

     N

     |\

     | \

    y|  \ x

     |   \

     |____\

     L  8cm M

Since X is the midpoint of MN, we know that MX = NX = 6/2 = 3cm. Similarly, Y is the midpoint of LN, so LY = NY = 8/2 = 4cm.

To find YN, we can use the Pythagorean theorem:

 Y________N

  |\     |

  | \    |

  |  \   | 6cm

  |   \  |

  |    \ |

 L|_____Y\|

     4cm

YN² = YL² + LN²

YN² = 4² + 8²

YN² = 80

YN = √80 = 4√5 cm

Therefore, YN = 4√5 cm.

To find YẼN, we need to find the angle YLN. Since Y is the midpoint of LN, YL is half the length of LN, which is 8cm. So YL = 4cm. We can use trigonometry to find the angle YLN:

tan(YLN) = opposite/adjacent

tan(YLN) = YL/LN

tan(YLN) = 4/8

tan(YLN) = 0.5

YLN ≈ 26.57°

Since LÑN = 90°, we know that YEN is the complement of YLN:

YEN = 90° - YLN

YEN ≈ 63.43°

Therefore, YEN ≈ 63.43°.

Learn more about Triangles

brainly.com/question/342881

#SPJ11

The derivative of (f∘g)(x) can be found using the chain rule, which states that the derivative of (f∘g)(x) is (f'(g(x)))(g'(x)).

In this case, (f∘g)(x) = f(g(x)) = 3(5^x) + 3cos(x), so we need to find f'(g(x)) and g'(x) and then multiply them together. The derivative of f(x) is f'(x) = 15^x * ln(5) + 1, so the derivative of f(g(x)) with respect to g(x) is f'(g(x)) = 15^(g(x)) * ln(5) + 1. The derivative of g(x) is g'(x) = -3sin(x). Therefore, using the chain rule, we have:(f∘g)'(x) = f'(g(x)) * g'(x) = (15^(g(x)) * ln(5) + 1) * (-3sin(x))Substituting g(x) = 3cos(x), we get:(f∘g)'(x) = (15^(3cos(x)) * ln(5) + 1) * (-3sin(x))So the correct answer is: (3(5^3cos(x)) ln(5) + 1) * (-3sin(x))

For more similar questions on topic a) The intervals for which f(x) = -5.5sin(x) + 5.5cos(x) is concave up and concave down on [0,2π] can be found by analyzing the second derivative of the function. Taking the second derivative of f(x), we get:

f''(x) = -5.5cos(x) - 5.5sin(x)

To find the intervals of concavity, we need to determine where f''(x) is positive and negative.

When f''(x) > 0, the function is concave up. When f''(x) < 0, the function is concave down.

Setting f''(x) = 0, we get:

-5.5cos(x) - 5.5sin(x) = 0

Simplifying, we get:

cos(x) + sin(x) = 0

Solving for x, we get:

x = 3π/4, 7π/4

These are the possible points of inflection for the function.

Using test intervals, we can determine the intervals of concavity:

When 0 ≤ x < 3π/4 or 7π/4 < x ≤ 2π, f''(x) < 0, so f(x) is concave down.

When 3π/4 < x < 7π/4, f''(x) > 0, so f(x) is concave up.

b) The possible points of inflection for f(x) on [0,2π] are x = 3π/4 and x = 7π/4. To find the coordinates of these points, we can substitute each value of x into the original function f(x):

f(3π/4) = -5.5sin(3π/4) + 5.5cos(3π/4) = 5.5√2 - 5.5√2/2 = 5.5√2/2

So the coordinates of the point of inflection at x = 3π/4 are (3π/4, 5.5√2/2).

Similarly, we can find the coordinates of the point of inflection at x = 7π/4:

f(7π/4) = -5.5sin(7π/4) + 5.5cos(7π/4) = -5.5√2 - 5.5√2/2 = -5.5(3/2)√2

So the coordinates of the point of inflection at x = 7π/4 are (7π/4, -5.5(3/2)√2).

For more question on differentiation

https://brainly.com/question/954654

Answer:

B

Step-by-step explanation:

1 1/2 x 1/3

=1/2

So therefore the answer is B (1/2 cup)

Answer:

The answer is B ( 1/2 cup)

The correct answer of estimation for each expression is 269,900, 220,251.7, 240,220.1 and 250,268.1.

270,349.6 - 112.8 = 270,236.8

To estimate, we can round 270,349.6 to 270,000 and round 112.8 to 100. Subtracting 100 from 270,000 gives us 269,900. Therefore, the estimated answer is 269,900.

220,173.3 + 78.4 = 220,251.7

To estimate, we can round 220,173.3 to 220,000 and round 78.4 to 80. Adding 80 to 220,000 gives us 220,080. Therefore, the estimated answer is 220,080.

240,817.2 - 597.1 = 240,220.1

To estimate, we can round 240,817.2 to 240,000 and round 597.1 to 600. Subtracting 600 from 240,000 gives us 239,400. Therefore, the estimated answer is 239,400.

250,108.8 + 159.3 = 250,268.1

To estimate, we can round 250,108.8 to 250,000 and round 159.3 to 160. Adding 160 to 250,000 gives us 250,160. Therefore, the estimated answer is 250,160.

To know more about estimation:

https://brainly.com/question/30562297

#SPJ4

To generate the sequence, we start with a1 = 4, and then use the formula an = an-1 + 7 for n > 1.

So, to find the first 3 terms of the sequence, we can use the formula:

a2 = a1 + 7 = 4 + 7 = 11

a3 = a2 + 7 = 11 + 7 = 18

The first 3 terms of the sequence are 4, 11, and 18.

So, the answer is 4, 11, 18, which corresponds to the third option.

To know more about sequence refer here

https://brainly.com/question9027588/#

#SPJ11

Using the given information we can compute several financial ratios that help us evaluate the company's financial performance.

To calculate these ratios, we need to use information from the income statement and the additional information provided.

One important financial ratio is earnings per share (EPS), To compute EPS, we divide net income by the average number of common shares outstanding during the year. To find the average number of shares outstanding, we add the beginning and ending shares and divide by 2.

Net income = $122,100

Average number of common shares outstanding = (26,700 + 36,000) / 2 = 31,350

EPS = $122,100 / 31,350 = $3.89

Another important financial ratio is the price-earnings (P/E) ratio, To compute the P/E ratio, we divide the market price per share by the EPS.

Market price per share = $13

EPS = $3.89

P/E ratio = $13 / $3.89 = 3.34 times

The payout ratio measures the proportion of earnings that is paid out as dividends. To compute the payout ratio, we divide total dividends by net income. However, we need to adjust for the fact that some of the dividends were paid to preferred stockholders. To do this, we subtract the preferred dividends from the total dividends before dividing by net income.

Total dividends = $24,200

Preferred dividends = $6,600

Common dividends = $24,200 - $6,600 = $17,600

Net income = $122,100

Payout ratio = $17,600 / $115,500 = 15.24%

The times interest earned (TIE) ratio, To compute the TIE ratio, we divide earnings before interest and taxes (EBIT) by interest expense.

Interest expense = $16,200

EBIT = Gross profit - Expenses + Interest expense = $197,300 - $75,200 + $16,200 = $138,300

TIE ratio = $138,300 / $16,200 = 8.54 times

To Know More about Financial Ratios here

https://brainly.com/question/30785230

#SPJ4

Answer:

Shape 1 and Shape 3

Step-by-step explanation:

An obtuse angle is an angle that is greater than 90° but less than 180°.

We can see that the first shape has 2 angles that are greater than 90°, making this a correct choice.
The second shape has 4 boxes, meaning the angles are exactly 90°, making this incorrect.

The third shape has 6 angles that are greater than 90°, making this another correct choice.

The last shape has all 3 angles under 90°, making this also incorrect.

So, the 1st and 3rd shapes are correct.

Hope this helps! :)

The equation required to modelled sound waves is given by y₁ + y₂ = 40 sin 3x cos θ.

Equations used to modelled sound waves are,

y₁= 20 sin (3x + θ)

A waves travelling in the opposite direction are,

y₂ = 20 sin (3x - θ)

To show that y₁ + y₂ = 40 sin 3x cos θ,

Simply substitute the given expressions for y₁ and y₂ and simplify using trigonometric identities.

sin A + sinB = 2 sin  [(A + B)/2] cos [(A - B)/2].

y₁ + y₂ = 20 sin (3x + θ) + 20 sin (3x - θ)

⇒y₁ + y₂ = 20 ( sin (3x + θ) + sin (3x - θ) )

Using the identity for the sum of two sines, simplify this expression,

⇒y₁ + y₂ = 2 ×20 × sin (3x + θ + 3x -  θ)/2 cos (3x + θ - 3x + θ)/2

⇒ y₁ + y₂ = 2 ×20 × sin (3x) cos (θ)

⇒ y₁ + y₂ = 40 sin (3x) cos (θ)

Therefore, for the sound waves y₁ + y₂ = 40 sin 3x cos θ, as required.

learn more about sound waves here

brainly.com/question/29436470

#SPJ4

The above question is incomplete, the complete question is:

Sound waves can be modeled by the equations of the form y₁= 20 sin (3x + θ). a wave traveling in the opposite direction can be modeled by y₂ = 20 sin (3x - θ). show that y₁ + y₂ = 40 sin 3x cos θ.

It should be noted that to calculate the mean and standard deviation of the sampling distribution, you need to know the population mean (μ) and standard deviation (σ) and the sample size (n) of the distribution.

The mean (μx) of the sampling distribution of the sample mean (x) is equal to the population mean (μ):

μx = μ

The standard deviation (σx) of the sampling distribution of the sample mean (x is equal to the population standard deviation (σ) divided by the square root of the sample size (n):

σx = σ / √n

Therefore, in order to calculate the mean and standard deviation of the sampling distribution, you just need to plug in the values of μ, σ, and n into these formulas.

Learn more about mean on

https://brainly.com/question/1136789

#SPJ1

How does one calculate mean and standard deviation of the sampling distribution.

How to interpret the standard deviation from part (1).

The complete factorization of the expression is  (m+n)(x-y).

The complete factorization of the expression is determined as follows;

To factorize the expression (m+n)(2x-y)-x(m+n), we can first factor out the common factor (m+n):

(m+n)(2x-y)-x(m+n) = (m+n)(2x-y-x)

Next, we will factorize completely as follows;

2x - x - y = x - y

(m+n)(2x-y-x)  = (m+n)(x-y)

Therefore, the fully factorized form of the expression is (m+n)(x-y).

Learn more about factorization here: https://brainly.com/question/18187355

#SPJ4

Applying the concept of combination, the number of different sandwiches that can be created is determined as: D. 6.

To determine the number of different sandwiches that can be created with two different meats, we can use the concept of combinations.

In this case, we need to choose 2 meats out of 4 options. The number of combinations of 2 items that can be chosen from a set of 4 items is given by the formula:

nCr = n! / r!(n-r)!

where n is the total number of items, r is the number of items to be chosen, and the exclamation mark (!) denotes the factorial function.

In this case, we have:

n = 4 (since there are 4 meat options)

r = 2 (since Regan wants to choose 2 meats)

Therefore, the number of different sandwiches that can be created is:

4C2 = 4! / 2!(4-2)! = 6

This means there are 6 different ways to choose 2 meats out of 4, and hence 6 different sandwich options.

Learn more about combination on:

https://brainly.com/question/11732255

#SPJ1

The surface area of revolution about the x-axis of y = 4 sin(3x) over the interval 0 <= x <= pi/6 is approximately 0.9402 units^2.

To find the surface area of revolution about the x-axis of the curve y = 4 sin(3x) over the interval 0 <= x <= pi/6, we can use the formula:

Surface area = 2π∫[a,b] y √(1+(dy/dx)^2) dx

where a = 0, b = pi/6, and y = 4 sin(3x).

First, we need to find dy/dx:

dy/dx = 12 cos(3x)

Next, we need to find √(1+(dy/dx)^2):

√(1+(dy/dx)^2) = √(1+144 cos^2(3x))

Now, we can substitute y and √(1+(dy/dx)^2) into the formula and integrate:

Surface area = 2π∫[0,pi/6] 4 sin(3x) √(1+144 cos^2(3x)) dx

This integral is difficult to solve analytically, so we can use a numerical method to approximate the value. One possible method is to use Simpson's rule:

Surface area ≈ (π/3)[f(0) + 4f(h) + 2f(2h) + 4f(3h) + ... + 4f(b-h) + f(b)]

where h = (pi/6)/n, n is an even integer, and f(x) = 4 sin(3x) √(1+144 cos^2(3x)).

Using n = 10, we get:

h = (pi/6)/10 = pi/60

Surface area ≈ (π/3)[f(0) + 4f(pi/60) + 2f(pi/30) + 4f(3pi/60) + ... + 4f(9pi/60) + f(pi/6)]

where f(x) = 4 sin(3x) √(1+144 cos^2(3x)).

Evaluating each term:

f(0) = 0

f(pi/60) ≈ 0.3025

f(pi/30) ≈ 0.3069

f(3pi/60) ≈ 0.3192

f(4pi/60) ≈ 0.3227

f(5pi/60) ≈ 0.3227

f(6pi/60) ≈ 0.3192

f(7pi/60) ≈ 0.3069

f(9pi/60) ≈ 0.3025

f(pi/6) ≈ 0

Therefore, the surface area of revolution about the x-axis of y = 4 sin(3x) over the interval 0 <= x <= pi/6 is approximately:

[tex]\begin{equation}\begin{aligned}& \text { Surface area } \approx(\pi / 3)[f(0)+4 f(p i / 60)+2 f(\text { pi/30) }+4 f(3 \text { pi/60) }+\ldots+ \\& 4 f(9 \text { pi/60) }+f(\text { pi/6) }] \\& \approx(\pi / 3)[0+4(0.3025)+2(0.3069)+4(0.3192)+\ldots+4(0.3025)+0] \\& \approx 0.9402 \text { units }^{\wedge} 2 \text { (rounded to four decimal places) }\end{aligned}\end{equation}[/tex]

Learn more about surface area of revolution of a curve .

brainly.com/question/31406130

#SPJ11

The absolute maximum value is 5 at x = 3/2 and the absolute minimum value is 4, which occurs at both x = 1 and x = 2.

To find the absolute maximum and minimum values of the function f(x) = -4x^2 + 12x - 4 on the interval [1, 2], we need to check the critical points and the endpoints of the interval.

First, let's find the critical points by taking the derivative of the function:

f'(x) = -8x + 12

To find the critical points, set f'(x) to 0 and solve for x:

-8x + 12 = 0
x = 3/2

Now, we have 3 points to check: x = 1, x = 3/2, and x = 2.

Evaluate the function at each point:

f(1) = -4(1)^2 + 12(1) - 4 = -4 + 12 - 4 = 4
f(3/2) = -4(3/2)^2 + 12(3/2) - 4 = -9 + 18 - 4 = 5
f(2) = -4(2)^2 + 12(2) - 4 = -16 + 24 - 4 = 4

Comparing the function values at these points, we find that the absolute maximum value is 5 at x = 3/2 and the absolute minimum value is 4, which occurs at both x = 1 and x = 2.

Learn more about function here:

https://brainly.com/question/12431044

#SPJ11

Answer:

The absolute maximum value is 5 at x = 3/2 and the absolute minimum value is 4, which occurs at both x = 1 and x = 2.

To find the absolute maximum and minimum values of the function f(x) = -4x^2 + 12x - 4 on the interval [1, 2], we need to check the critical points and the endpoints of the interval.

First, let's find the critical points by taking the derivative of the function:

f'(x) = -8x + 12

To find the critical points, set f'(x) to 0 and solve for x:

-8x + 12 = 0

x = 3/2

Now, we have 3 points to check: x = 1, x = 3/2, and x = 2.

Evaluate the function at each point:

f(1) = -4(1)^2 + 12(1) - 4 = -4 + 12 - 4 = 4

f(3/2) = -4(3/2)^2 + 12(3/2) - 4 = -9 + 18 - 4 = 5

f(2) = -4(2)^2 + 12(2) - 4 = -16 + 24 - 4 = 4

Comparing the function values at these points, we find that the absolute maximum value is 5 at x = 3/2 and the absolute minimum value is 4, which occurs at both x = 1 and x = 2.

Step-by-step explanation:

The volume of the frustum is approximately 634.3 cubic centimeters.

Let the radius of the smaller cone be 'r' and the radius of the bigger cone be 'R'.

Since the height of the smaller cone is 8 cm and its volume is 160 cm³, we have:

1/3 * π * r² * 8 = 160

r² = 60/π

r ≈ 4.03 cm

Now, using similar triangles, we can find the radius 'R' of the bigger cone:

(R - r)/16 = R/24

24R - 24r = 16R

R = 2r/3

R ≈ 2.69 cm

Therefore, the volume of the frustum is:

1/3 * π * (2.69² + 2.69*4.03 + 4.03²) * 16 - 1/3 * π * 4.03² * 8

≈ 634.3 cm³

So, the volume of the frustum is approximately 634.3 cubic centimeters.

Learn more about radius

brainly.com/question/31744314

#SPJ11

Answer:

504 cm^2.

Step-by-step explanation:

By Pythagoras:

(2x + 5)^2 = (2x + 3)^2 + (x - 14)^2

4x^2 + 20x + 25 = 4x^2 + 12x + 9 + x^2 - 28x + 196

20x - 12x + 28x + 25 - 9 - 196 = x^2

x^2 - 36x + 180 = 0

(x - 6)(x - 30) = 0

x = 6, 30.

As one of the sides is x - 14, x mst be 30 as its length has to be positive.

So the area of the triangle

= 1/2 * (x - 14) 8 (2x + 3)

= 1/2 * (30-14)(60 + 3)

= 1/2 * 16 * 63

= 504 cm^2.

The measure of angles ADC is 30⁰.

The measure of angles DCA is 120⁰.

The measure of angles DCB is 180⁰.

The measure of angles AEB is 30⁰.

The measure of each of the angles is calculated as follows;

if length AB = length CD, then AC = AB

Also triangle ACB = equilateral triangle, and each angle = 60⁰.

Angle DAB = 90 (since line DB is the diameter)

Angle DAC = angle ADC

DAC = 90 - 60 = 30 = ADC

DCA = 180 - (30 + 30) (sum of angles in a triangle)

DCA = 120⁰.

The value of angle DCB is calculated as follows;

DCB = 180 (sum of angles on straight line)

angle AEB = angle ADC (vertical opposite angles )

angle AEB = 30⁰

Learn more about angles in a triangle here: https://brainly.com/question/25215131

#SPJ1

In ∆DEF, DG−→− bisects ∠EDF. ∆FDG is similar to ∆EDG; ∆FDG and ∆EDG may not be congruent, but they are similar by the ASA Similarity Postulate. Therefore, the correct option is B.

1. Since DG bisects ∠EDF, it means that ∠EDG = ∠FDG. This is the Angle Bisector Theorem.

2. In triangles FDG and EDG, we know that ∠FDG = ∠EDG (from step 1) and ∠DFG = ∠DEG (both are vertical angles and therefore congruent).

3. Now we have two pairs of congruent angles: ∠FDG = ∠EDG and ∠DFG = ∠DEG.

4. According to the (Angle-Side-Angle) or  ASA Similarity Postulate, if two angles in one triangle are congruent to two angles in another triangle, then the triangles are similar. Therefore, ∆FDG is similar to ∆EDG.

Hence, the correct answer is option B: Yes; ∆FDG and ∆EDG may not be congruent, but they are similar by the ASA Similarity Postulate.

Learn more about ASA Similarity:

https://brainly.com/question/30091621

#SPJ11

The domain of the rational function is: option (2)  {x ∈ ℝ | x ≠ -4, 3, 4}

A rational number is any number that can be expressed as the ratio or fraction of two integers, where the denominator is not zero. In other words, a rational number is a number that can be written in the form of p/q, where p and q are integers, and q is not equal to zero.

The domain of a rational function is the set of all real numbers for which the function is defined, and the denominator is not equal to zero. So, we need to find the values of x for which the denominator of the given rational function is not zero.

The denominator of the given rational function is:

x³ - 3x² - 16x + 48

We can factor this polynomial using synthetic division or polynomial long division:

x³- 3x² - 16x + 48 = (x - 4)(x - 3)(x + 4)

So, the denominator of the rational function is not defined when:

x - 4 = 0 or x - 3 = 0 or x + 4 = 0

Solving these equations, we get:

x = 4 or x = 3 or x = -4

Therefore, the domain of the given rational function is:

{x ∈ ℝ| x ≠ –4, 3, 4}

Learn more about integers here

https://brainly.com/question/1768254

#SPJ1

Answer:

m = 2

Step-by-step explanation:

6m = 12

6 × m = 12

m = 12 ÷ 6

m = 2

If it helps, then pls like and mark as brainliest!

Answer:

m = 2

Step-by-step explanation:

6m = 12

6m = 6^2

• get rid of common element which is 6. Devide both side by six.

6m ÷ 6 = 6^2 ÷ 6

m = 2

x^(1/2) = 0

This equation has no real solutions, since no real number raised to any power can equal 0.

Therefore, the sum of all values of x satisfying r*(x) = 0 or P(x) is undefined is just 2, the only value of x for which r*(x) - 0.

To find the values of x for which r*(x) - 0 or P(x) is undefined, we first need to determine what r*(x) and P(x) are.

r*(x) is the derivative of f(x), which we can find using the product rule:

r*(x) = (1/2)x^(-1/2)(x-4) + x^1/2(1)

Simplifying this expression, we get:

r*(x) = (x-2)/sqrt(x)

To find the values of x for which r*(x) - 0, we can set r*(x) equal to 0 and solve for x:

(x-2)/sqrt(x) = 0

x - 2 = 0

x = 2

So the only value of x for which r*(x) - 0 is x = 2.

Next, we need to find the values of x for which P(x) is undefined. P(x) is undefined when the denominator of the expression for f(x) is equal to 0, since division by 0 is undefined. The denominator of f(x) is x^(1/2), so we need to solve the equation x^(1/2) = 0:

x^(1/2) = 0

This equation has no real solutions, since no real number raised to any power can equal 0.

Therefore, the sum of all values of x satisfying r*(x) = 0 or P(x) is undefined is just 2, the only value of x for which r*(x) - 0.

Learn more about equation here:

https://brainly.com/question/29538993

#SPJ11

To find the first derivative of the equation x cos(14x + 13y) = y sin x, we will need to use the chain rule and product rule.

First, we will differentiate each term separately:

d/dx(x) = 1

d/dx(cos(14x + 13y)) = -sin(14x + 13y) * d/dx(14x + 13y)
= -sin(14x + 13y) * 14

d/dx(y) = 0 (since y is a constant)

d/dx(sin(x)) = cos(x)

Next, we will apply the product rule to differentiate the left-hand side of the equation:

d/dx(x cos(14x + 13y)) = cos(14x + 13y) + x * (-sin(14x + 13y) * 14)

Now, we can set this expression equal to the derivative of the right-hand side of the equation and solve for the first derivative:

cos(14x + 13y) - 14x sin(14x + 13y) = y cos(x)

Our final answer for the first derivative is:

cos(14x + 13y) - 14x sin(14x + 13y) = y cos(x)

First derivativehttps://brainly.com/question/21840315

#SPJ11

Around $441 million worth of food is wasted in the US each day.

According to the United States Department of Agriculture (USDA), about 30-40 percent of the food supply in the United States goes to waste. In terms of dollars, that translates to approximately $161 billion worth of food being wasted each year in the United States.

Dividing that number by 365, we can estimate that around $441 million worth of food is wasted in the US each day.

It's difficult to estimate how many people could be fed with the food that is thrown away, as food waste can take many forms, such as uneaten meals at restaurants, spoiled produce at grocery stores, and expired food in households. However, according to Feeding America, a national food bank network, approximately 42 million Americans, including 13 million children, are food insecure, which means they lack reliable access to affordable, nutritious food.

If we assume that all the food that is currently being wasted in the US could be redistributed to those who are food insecure, it could potentially feed a significant number of people. However, in reality, the logistics of collecting, storing, and distributing food waste can be complex, and some food waste may not be safe or nutritious to eat. Additionally, addressing food waste is just one piece of the puzzle in addressing food insecurity, which is a complex issue with many underlying factors.

Learn more about food wastage

brainly.com/question/2062616

#SPJ11

After one month, Betty will owe $407.02 on her credit card.

The amount Betty will owe after one month depends on how much of the stability she will pay off in the course of that point.

Assuming she does not make any payments in the course of the first month, here is how to calculate her balance:

The cash-withdrawal price is a one-time fee, so it does no longer affect the stability after one month.

Betty withdrew $400, so her starting balance is $406 ($400 for the lawnmower plus $6 cash-withdrawal price).

The interest rate is 3%, that's an annual price. To calculate the monthly charge, divide with the aid of 12: three% / 12 = 0.25%.

To calculate the interest charged for the first month, multiply the stability through the monthly interest rate: $406 * 0.25% = $1.02.

Add the interest to the balance: $406 + $1.02 = $407.02. that is Betty's balance after one month.

Consequently, after one month, Betty will owe $407.02 on her credit card.

Learn more about Simple interest rate:-

https://brainly.com/question/25720319

#SPJ4

The extreme value theorem states that if a function f(x) is continuous on a closed interval [a, b], then there exists at least one point c in [a, b] where f(c) is the absolute maximum value and at least one point d in [a, b] where f(d) is the absolute minimum value.

A. f(x)=x2 over(-5,0] - This function is continuous on the closed interval [-5,0], so by the extreme value theorem, there exists at least one absolute maximum and one absolute minimum.

B. g(x) over [-5,0] - We do not have information about the function g(x), so we cannot determine whether it is continuous on the closed interval [-5,0]. Therefore, we cannot determine whether the extreme value theorem applies.

C. h(x)=1x-1 lover [-5.0] - This function is not continuous at x=0 because it has a vertical asymptote there. Therefore, the extreme value theorem does not apply.

D. k( x) = Vx + 1 over [- 5,0] - This function is continuous on the closed interval [-5,0], so by the extreme value theorem, there exists at least one absolute maximum and one absolute minimum.

E. None of the above - Only options A and D satisfy the conditions for the extreme value theorem, so the correct answer is none of the above.

To learn more about function click here

brainly.com/question/12431044

#SPJ11