Select the correct location on the table.
Darian knows the area of a ring-shaped figure, and wants to determine the radius of the outer circle. His teacher tells him the following formula for finding the area of a ring based on the radius of the smaller circle, r, and the radius of the outer ring, R.

An illustration of two concentric circles. The radius of the inner circle is lower case r and the radius of the outer circle is upper case R.

Darian decides to rewrite the equation to solve for the radius of the outer ring. His work is shown below. Determine if Darian made a mistake when rewriting the equation, and if so, select the step where Darian made his first error.

Answer:

12.5%

Step-by-step explanation:

We Know

A student scored 80 on a test last week and 90 on the same test this week.

What is the percent increase in the score?

We Tale

(90 ÷ 80) x 100 = 112.5%

Then we take

112.5 - 100 = 12.5%

So, the percent increase in score is 12.5%

i) The length of the arc is approximately 73.148 meters.

ii) The area of the sector is approximately 85.584 square meters.

(i) The length of an arc can be calculated using the formula:

Arc Length = (θ/360) × 2πr

where;

θ = central angle in degrees

r = radius of the circle

π = mathematical constant approximately equal to 3.14159.

Given that the central angle is 85° and the radius is 7 meters, we can substitute these values into the formula:

Arc Length = (85/360) × 2π × 7

= (17/72) × 2 × 3.14159 × 7

≈ 1.7454 × 6.28318 × 7

≈ 73.148 meters (rounded to three decimal places.

(ii) The area of a sector can be calculated using the formula:

Sector Area = (θ/360) × πr²

Given that the central angle is 85° and the radius is 7 meters, we can substitute these values into the formula:

Sector Area = (85/360) × π × 7²

= (17/72) × 3.14159 × 7²

≈ 1.7454 × 3.14159 × 49

≈ 85.584 square meters (rounded to three decimal places)

To learn more about length follow the link:

https://brainly.com/question/16403495

#SPJ1

The correct question is:

Find:

(i) the length of an arc

(ii) the area of a sector in a circle of radius 7 meters subtended by the central angle of 85°.

Answer:

[tex]f(0) = 6.2 \sqrt{4.5} + 18 = 31.2[/tex]

Compound interest is the interest earned on the principal and the interest previously accumulated. It is given by

[tex]A=P(1+r/n)^{nt}[/tex]

where P = Principal, r = annual rate of interest, n = the number of times interest is compounded per year & t = time in years.

The given principal is $1600 for 11 years & amount is $2400 compounded quarterly.

To find the rate of interest compounded quarterly for 11 years substitute the given values in the above formula i.e

[tex]2400=1600(1+r/4)^{11*4}[/tex]

r=3.70%.

#SPJ1

The given fraction can be converted into  whole  number as

16/5 +52/9 =9

99/7 -15/2=7

13/8+ 27/5=7

41/4-26/15=9

27/10+44/9=8

We can see that all the expression was given as a fraction the to convert to whole number we will need to solve them by performing the neccessary addition as well as substraction operations then it will converted to whole number.

16/5 +52/9

=404/45.

=8.977

=9

99/7 -15/2=

= 93/14

=6.643

7

13/8+ 27/5

= 281/40

=7.025

7

41/4-26/15

=511/60

=8.52

=9

27/10+44/9

= 683/90

=7.59

=8

Learn more about fraction at:

https://brainly.com/question/78672

#SPJ1

Answer:

Step-by-step explanation:

I cannot find 2 numbers that multiply to the last term (+11) and add to middle term (-5)

So it can't be factored that way.

After further inspection.  i try to plug it into b²-4ac  from the quadratic formula.

b=-5

c=11

(-5)²-4(1)(11)

= -19   you can never get a negative under the square root.  so this quadratic will produce 2 imaginary solutions. so it is not factorable.

Answer:

low lying areas

About 120 students have travel times within the quoted interquartile range.

The interquartile range (IQR) represents the range of the middle 50% of a set of data, which is the difference between the third quartile (Q3) and the first quartile (Q1).

Assuming that the travel times are normally distributed and that we have information on the quartiles, we can use the formula:

IQR = Q3 - Q1

To find the number of students whose travel times fall within the interquartile range, we need to know the values of Q1 and Q3.

Since the IQR is 32 minutes:

32 = Q3 - Q1

We also know that the total number of students in Year 12 is 240. Assuming that all students have reported their travel times, we can use the interquartile range to estimate the proportion of students whose travel times fall within this range.

If the interquartile range covers the middle 50% of the data, then each quartile should cover 25% of the data. Therefore, we can estimate that the number of students whose travel times fall within the interquartile range is:

Number of students = 240 x 0.50 = 120

Therefore, we estimate that 120 of the 240 Year 12 students have travel times within the interquartile range of 32 minutes.

More on interquartile range can be found here: https://brainly.com/question/29204101

#SPJ1

The ramp has a volume capacity of around 37.5 cubic feet.

Calculating the volume of a triangular prism shaped ramp follows a specific formula. First, identify the shape and refer to the equation:

Volume = (1/2) * Base Area * Height

To begin, the base is always in a right-angled triangle form, where its area depends on its width denoted as W, and height noted specifically as H.

Based on these computations, knowing that its triangular base measures 5 feet at its length while taking its height equates 3 feet therefore assessing how much it covers can be found using:

Triangle Area = (1/2) * Base * Height

Substituting values into solving areas leads us to have an answer of over 7 square feet.

Next is computing the volume of the said triangular prism. Placing all given data results in the same formula:

Volume = (1/2) * Base Area * Height

With one-half of the product of both areas which resulted in 7.5 square feet and then multiplying the figure by 10 ft, this yields us an approximate volume of 37.5 cubic feet.

In conclusion, we have determined that the ramp has a volume capacity of around 37.5 cubic feet.

Read more about volume here:

https://brainly.com/question/27710307

#SPJ1

Length (L) = 10 feet

Width (W) = 5 feet

Height (H) = 3 feet

Mr. González designed a ramp for his car with a length of 10 feet, a width of 5 feet, and a height of 3 feet. What is the volume of the ramp in cubic feet?

Answer:

x = 0, -1, -3

Step-by-step explanation:

Move all terms to the left side and set equal to zero. Then set each factor to equal zero.

When -3 (row 1) is added to row 2, the result would be [ 1 - 4 | 8 ]

[ 0 10 | 10 ].

The first thing to do is to multiply each element in row 1 by - 3 :

- 3 x 1 = - 3

- 3 x - 4 = 12

- 3 x 8 = - 24

Then, we need to add the result to the elements in row 2:

3 + ( - 3 ) = 0

- 2 + 12 = 10

10 + ( - 24 ) = - 14

The resulting matrix would therefore be:

[ 1 - 4 | 8 ]

[ 0 10 | - 14 ]

Find out more on matrices at https://brainly.com/question/26687738

#SPJ1

Therefore , the solution of the given problem of unitary method comes out to be 50 tyre rotations, you will have covered around 376.99 inches (or about 31.41 feet).

The well-known simple approach, real variables, and any crucial elements from the very initial And specialised inquiry can all be used to finish the work. Customers may then be given another chance to try the product in response. If not, significant impacts on our understanding of algorithms will vanish.

Here,

The circumference of the circle the bike tyre forms is equal to the distance travelled in one rotation of the tyre. The following formula determines a circle's circumference:

=> C = 2πr

where the mathematical constant is roughly equivalent to 3.14159 and r is the circle's radius.

Your bicycle tyre's radius in this instance is 12 inches. The tyre's circumference is as follows:

=> C = 2π(12) = 24π inches

You may easily calculate how far you will travel after 50 spins by multiplying the tyre's circumference by the number of turns:

=> Covered distance:  50 × 24π ≈ 376.99 inches

As a result, after 50 tyre rotations, you will have covered around 376.99 inches (or about 31.41 feet).

To know more about unitary method visit:

https://brainly.com/question/28276953

#SPJ9  

Using trigonometry and the Pythagorean theorem, the length of the hypotenuse AC is found to be 3.5 cm, and using the Pythagorean theorem again, the length of BC is found to be approximately 1.75 cm.

Using trigonometry and the given angle and side length information, we can solve for the length of side BC (x).

We know that

sin(A) = opposite/hypotenuse

sin(30) = AC/7

AC = 7 × sin(30)

AC = 3.5 cm

Using the Pythagorean theorem, we have

BC² = AC² - AB²

BC² = (3.5)² - (7)² sin²(30)

BC² = 3.0625

BC = √3.0625

BC = 1.75 cm (rounded to two decimal places)

Therefore, the value of x is approximately 1.75 cm.

To know more about Pythagorean theorem:

https://brainly.com/question/14930619

#SPJ1

If a candle having diameter as 9 cm, height as 12 cm is placed in a cylindrical box, then the height of the cylindrical box will be 13cm.

The "cylindrical-candle" diameter is given as = 9 cm;

The "cylindrical-candle" height is given as = 12 cm;

The candle is placed in a box which has a space of 0.5 cm between the candle and the box for packaging material;

which means that, there will an additional 0.5 cm in the top and bottom of the candle,

So, the height of the "cylindrical-box" is written as : 0.5 + 12 + 0.5;

Therefore, the "cylindrical-box" has a height of 13 cm.

Learn more about Cylinder here

https://brainly.com/question/23778806

#SPJ1

Answer:

To calculate the surface area of the cylinder, we need to find the area of the two circular bases and the lateral surface area.

The formula for the circumference of a circle is:

C = 2πr

where C is the circumference and r is the radius. We can rearrange this formula to solve for the radius:

r = C/2π = 513.88/(2 x 3.14) = 81.91 yards

The formula for the area of a circle is:

A = πr^2

where A is the area and r is the radius. We can use this formula to find the area of one of the circular bases:

B = πr^2 = 3.14 x 81.91^2 = 21,237.93 square yards

The formula for the lateral surface area of a cylinder is:

P x h

where P is the perimeter of the base and h is the height. We can use the formula for the circumference to find the perimeter of the base:

P = C = 513.88 yards

Now we can calculate the lateral surface area:

L = P x h = 513.88 x 11 = 5,652.68 square yards

Finally, we can use the formula for the surface area of a cylinder:

SA = 2B + L = 2(21,237.93) + 5,652.68 = 48,128.54 square yards

Therefore, the surface area of the cylinder is approximately 48,128.54 square yards when rounded to the nearest hundredth.

Answer: w(t) = 60 * 4^(t-1).

Step-by-step explanation:

The given ordered pairs model an exponential function of the form w(t) = ab^t, where w is the function name, t is the input variable, a is the initial value, and b is the growth factor.

From the first ordered pair (1, 60), we can see that the initial value a is 60. From the second and third ordered pairs (2, 240) and (3, 960), we can see that the output value is multiplied by 4 when the input value increases by 1. This means that the growth factor b is 4.

So, the function equation in sequence notation is w(t) = 60 * 4^(t-1).

The ball reaches a height of 40 meters at approximately 3.38 seconds after it is kicked.

To determine if the ball reaches a height of 40 meters, we can substitute h(t) = 40 into the equation and solve for t.

40 = -2t² + 4t + 27

Rearranging the terms, we get:

2t² - 4t - 13 = 0

We can solve for t using the quadratic formula:

t = [4 ± √(4² - 4(2)(-13))]/(2(2))

t = [4 ± √(176)]/4

t ≈ 3.38 or t ≈ -0.88

Since time cannot be negative, we can discard the negative solution. Therefore, the ball reaches a height of 40 meters at approximately 3.38 seconds after it is kicked.

To learn more about height click on,

https://brainly.com/question/30958568

#SPJ1

The area of the tabletop made by the students in the furniture - making class would be 26 ft ²

We can see that this tabletop made by students in the furniture - making class takes the form of a composite shape with two smaller rectangles and one large rectangle.

The area of the large rectangle is:

= 4 ft x ( 1 + 3 + 1 )

= 4 ft x 5 ft

= 20 ft ²

The area of the two smaller rectangles is:

= 2 x ( 3 ft x 1 ft )

= 2 x 3

= 6 ft ²

The total area of the tabletop is:

= 20 + 6

= 26 ft ²

Find out more on area at https://brainly.com/question/8370446

#SPJ1

The approximate standard error of the mean, assuming a 99.7% confidence level is 40.41.

Given population mean (µ) = $49,829

population standard deviation (σ) = $933

the randomly selected households (n) = 533 households

the confidence level = 99.7%

To find the standard error of the mean at a 99.7% of confidence level, we will substitute the above values in the below equation,

Standard error of the mean = σ/√n = 933/√533 ≅ 40.41

From the above analysis, we can conclude that the standard error of the mean at a 99.7% confidence level is 40.41.

To know more about the standard error of the mean,

https://brainly.com/question/29037921

#SPJ1

Answer:

40.41

Step-by-step explanation:

Plato/Edmentum

Surface area of similar cone is 44π square inches

What does a cone in maths ?

A cone is referred to as a "right cone" when its vertex is higher than the base's centre (i.e., when the angle formed by the vertex, base center, and any base radius is a right angle); otherwise, the word "oblique" is used. A cone is referred to as an elliptic cone when the base is assumed to be an ellipse rather than a circle.

The surface area of a cone is given by:

surface area = πr(r + l)

where r is the radius and l is the slant height.

surface area of original cone = π(3)(3 + 12) = 45π

slant height of similar cone = (6/3)(12) = 24 inches

surface area of similar cone = π(6)(6 + 18) = 144π

ratio of surface areas = surface area of similar cone / surface area of original cone

= (144π) / (45π)

= 3.2

Therefore, The exact surface area of the similar cone is 6 times the surface area of the original cone,

6 × 45π = 144π square inches

Learn more about cone

brainly.com/question/16394302

#SPJ1

The scale factor between a square of dimensions 7 by 7 and a scaled copy of dimensions 21/2 by 21/2 is 3/2 or 1.5.

We know that the dimensions of the square on the left are 7 by 7, and the dimensions of the square on the right are 21/2 by 21/2.

To find the scale factor, we can divide the dimensions of the square on the right by the dimensions of the square on the left

scale factor = (21/2) / 7

We can simplify this fraction by dividing both the numerator and the denominator by the greatest common factor, which is 7

scale factor = (21/2) / 7 = (21/2) * (1/7) = 3/2

Therefore, the scale factor is 3/2, or 1.5.

To know more about scale factor:

https://brainly.com/question/30215044

#SPJ1

The system of linear equations that can be solved from the matrices is given as follows:

Considering that the row [3, -6] is common to matrices Ax and Ay, the matrix A is given as follows:

A = [-5 4; -8 1]

Hence the multiplication of matrices representing the system is given as follows:

[-5 4; -8 1][x; y] = [3; -6]

Applying the multiplication of matrices, the system of equations is given as follows:

More can be learned about a system of equations at https://brainly.com/question/13729904

#SPJ1

Answer: We can solve this problem by finding the total weight of the meat and then dividing by the weight of each patty to see if we can make the desired number of patties.

Let's add the weights of the two packages of meat:

10 + 11.5 = 21.5

For option A, we need 87 1/4-pound patties.

Each pound of meat will yield 4 patties of this size, so 21.5 pounds of meat will yield:

21.5 x 4 = 86 patties

Since we need 87 patties, Claude does not have enough meat for option A.

For option B, we need 45 1/2-pound patties.

Each pound of meat will yield 2 patties of this size, so 21.5 pounds of meat will yield:

21.5 x 2 = 43 patties

Since we need 45 patties, Claude does not have enough meat for option B.

For option C, we need 30 1/2-pound patties and 2 74-pound patties.

Each pound of meat will yield 2 patties of the smaller size and 1 patty of the larger size, so 21.5 pounds of meat will yield:

(21.5 x 2) + (2 x 1) = 43 + 2 = 45 patties

Since Claude only has 21.5 pounds of meat, he does not have enough for option C.

For option D, we need 29 3/4-pound patties.

Each pound of meat will yield 1.5 patties of this size, so 21.5 pounds of meat will yield:

21.5 x 1.5 = 32.25 patties

Since we only need 29.75 patties, Claude has enough meat for option D.

Therefore, the answer is Yes, Claude can make 29 3/4-pound hamburger patties.

Answer:

C. Luisa is incorrect, it's not 0. It's only zero when you get "x=0" as an answer but the variable x got canceled here. And as 3=3, it is a true statement so it includes all real numbers. If you had gotten 3=8 for example, it would be a fake statement, so then no solution.

And for the second part,

1. No solution

5x+24=5x+25

24=25

It's false

2. One solution

12p-7=-3p+8

15p=15

P=1

3. One solution.

3x+20=5x

20 = 2x

X = 10

Answer:

Step-by-step explanation:

The solution to the system of equations `x=9y` and `3y - 3x =24` can be found by substituting the value of `x` from the first equation into the second equation. This gives us `3y - 3(9y) = 24`, which simplifies to `-24y = 24`. Solving for `y`, we get `y = -1`. Substituting this value of `y` into the first equation, we get `x = 9(-1) = -9`. So the solution to the system of equations is `(x,y) = (-9,-1)`.

Is there anything else you would like to know?

Answer:

81

Step-by-step explanation:

The difference between the maximum and minimum values in a collection of data is known as the range. We must first determine the lowest and maximum values before we can determine the age range of the clients.

the minimum age is 8, and the maximum age is 89.

Therefore, the range of the clients' ages is:

Max age - Min age = 89 - 8 = 81

So the range of the clients' ages is 81.

Answer:

$17,204.28

Step-by-step explanation:

So first of all you want to start by finding what P, r and t would be.

Once I found all of those I put them into the equation (l = Prt) and solved (by putting it into a calculator obviously). That is how I came up with my answer. Check the screenshot provided to see what P, r and t would be and to see all my work! :)

Hope this helps! :)

Have a great day!

The tangent function for the given terminal point is undefined.

The given terminal point of Θ is (0,-1). The tangent of an angle is defined as the quotient between the y-component and the x- component of the terminal point.

So, according to the question, tan Θ = -1/0. Hence, tan Θ is undefined as -1/0 is not defined.

Hence, tan Θ for the given function is not defined.

To learn more about tangent function click on:

https://brainly.com/question/21551278

#SPJ1